1.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000
1.2 +++ b/patches/newlib/1.17.0/100-avr32.patch Thu Aug 26 23:36:54 2010 +0200
1.3 @@ -0,0 +1,32450 @@
1.4 +diff -Naur newlib-1.17.0/COPYING.LIBGLOSS newlib-1.17.0-new/COPYING.LIBGLOSS
1.5 +--- newlib-1.17.0/COPYING.LIBGLOSS 2008-12-18 00:16:07.000000000 +0100
1.6 ++++ newlib-1.17.0-new/COPYING.LIBGLOSS 2009-05-22 09:57:49.000000000 +0200
1.7 +@@ -228,3 +228,33 @@
1.8 + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
1.9 + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
1.10 + SUCH DAMAGE.
1.11 ++
1.12 ++(13) Atmel Corporation (avr32 targets only)
1.13 ++Copyright (c) 2006, Atmel Corporation All rights reserved.
1.14 ++
1.15 ++Redistribution and use in source and binary forms, with or without
1.16 ++modification, are permitted provided that the following conditions are met:
1.17 ++
1.18 ++1. Redistributions of source code must retain the above copyright notice,
1.19 ++this list of conditions and the following disclaimer.
1.20 ++
1.21 ++2. Redistributions in binary form must reproduce the above copyright notice,
1.22 ++this list of conditions and the following disclaimer in the documentation
1.23 ++and/or other materials provided with the distribution.
1.24 ++
1.25 ++3. The name of ATMEL may not be used to endorse or promote products
1.26 ++derived from this software without specific prior written permission.
1.27 ++
1.28 ++THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS
1.29 ++OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
1.30 ++IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
1.31 ++PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY
1.32 ++DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
1.33 ++INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
1.34 ++DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
1.35 ++SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
1.36 ++OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
1.37 ++THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
1.38 ++OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
1.39 ++WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
1.40 ++POSSIBILITY OF SUCH DAMAGE.
1.41 +diff -Naur newlib-1.17.0/COPYING.NEWLIB newlib-1.17.0-new/COPYING.NEWLIB
1.42 +--- newlib-1.17.0/COPYING.NEWLIB 2008-12-18 00:16:07.000000000 +0100
1.43 ++++ newlib-1.17.0-new/COPYING.NEWLIB 2009-05-22 09:57:49.000000000 +0200
1.44 +@@ -767,3 +767,33 @@
1.45 + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
1.46 + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
1.47 + SUCH DAMAGE.
1.48 ++
1.49 ++(35) Atmel Corporation (avr32 targets only)
1.50 ++Copyright (c) 2006, Atmel Corporation All rights reserved.
1.51 ++
1.52 ++Redistribution and use in source and binary forms, with or without
1.53 ++modification, are permitted provided that the following conditions are met:
1.54 ++
1.55 ++1. Redistributions of source code must retain the above copyright notice,
1.56 ++this list of conditions and the following disclaimer.
1.57 ++
1.58 ++2. Redistributions in binary form must reproduce the above copyright notice,
1.59 ++this list of conditions and the following disclaimer in the documentation
1.60 ++and/or other materials provided with the distribution.
1.61 ++
1.62 ++3. The name of ATMEL may not be used to endorse or promote products
1.63 ++derived from this software without specific prior written permission.
1.64 ++
1.65 ++THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS
1.66 ++OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
1.67 ++IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
1.68 ++PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY
1.69 ++DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
1.70 ++INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
1.71 ++DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
1.72 ++SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
1.73 ++OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
1.74 ++THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
1.75 ++OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
1.76 ++WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
1.77 ++POSSIBILITY OF SUCH DAMAGE.
1.78 +diff -Naur newlib-1.17.0/newlib/configure.host newlib-1.17.0-new/newlib/configure.host
1.79 +--- newlib-1.17.0/newlib/configure.host 2008-12-18 00:09:09.000000000 +0100
1.80 ++++ newlib-1.17.0-new/newlib/configure.host 2009-05-22 09:57:49.000000000 +0200
1.81 +@@ -99,6 +99,10 @@
1.82 + arm)
1.83 + machine_dir=arm
1.84 + ;;
1.85 ++ avr32*)
1.86 ++ machine_dir=avr32
1.87 ++ newlib_cflags="${newlib_cflags} -ffunction-sections"
1.88 ++ ;;
1.89 + avr*)
1.90 + newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues"
1.91 + ;;
1.92 +@@ -365,6 +369,9 @@
1.93 + crx*)
1.94 + sys_dir=
1.95 + ;;
1.96 ++ avr32-*-*)
1.97 ++ sys_dir=avr32
1.98 ++ ;;
1.99 + d10v*)
1.100 + sys_dir=d10v
1.101 + ;;
1.102 +@@ -575,6 +582,10 @@
1.103 + arc*)
1.104 + newlib_cflags="${newlib_cflags} -DREENTRANT_SYSCALLS_PROVIDED"
1.105 + ;;
1.106 ++ avr32*)
1.107 ++ syscall_dir=syscalls
1.108 ++ newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM"
1.109 ++ ;;
1.110 + avr*)
1.111 + newlib_cflags="${newlib_cflags} -DNO_EXEC -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES"
1.112 + ;;
1.113 +diff -Naur newlib-1.17.0/newlib/libc/include/machine/ieeefp.h newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h
1.114 +--- newlib-1.17.0/newlib/libc/include/machine/ieeefp.h 2008-12-11 21:05:38.000000000 +0100
1.115 ++++ newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h 2009-05-22 09:57:49.000000000 +0200
1.116 +@@ -275,6 +275,10 @@
1.117 + #define _DOUBLE_IS_32BITS
1.118 + #endif
1.119 +
1.120 ++#ifdef __AVR32__
1.121 ++#define __IEEE_BIG_ENDIAN
1.122 ++#endif
1.123 ++
1.124 + #if defined(__or32__) || defined(__or1k__) || defined(__or16__)
1.125 + #define __IEEE_BIG_ENDIAN
1.126 + #endif
1.127 +diff -Naur newlib-1.17.0/newlib/libc/include/machine/setjmp.h newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h
1.128 +--- newlib-1.17.0/newlib/libc/include/machine/setjmp.h 2008-12-11 21:05:38.000000000 +0100
1.129 ++++ newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h 2009-05-22 09:57:49.000000000 +0200
1.130 +@@ -13,6 +13,13 @@
1.131 + #define _JBLEN 24
1.132 + #endif
1.133 +
1.134 ++#if defined(__AVR32__)
1.135 ++/*
1.136 ++ r0-r7, lr, sp
1.137 ++ */
1.138 ++#define _JBLEN 10
1.139 ++#endif
1.140 ++
1.141 + #ifdef __sparc__
1.142 + /*
1.143 + * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext).
1.144 +diff -Naur newlib-1.17.0/newlib/libc/include/machine/time.h newlib-1.17.0-new/newlib/libc/include/machine/time.h
1.145 +--- newlib-1.17.0/newlib/libc/include/machine/time.h 2000-12-04 20:06:37.000000000 +0100
1.146 ++++ newlib-1.17.0-new/newlib/libc/include/machine/time.h 2009-05-22 09:57:49.000000000 +0200
1.147 +@@ -6,6 +6,10 @@
1.148 + #else /* !__rtems__ */
1.149 + #if defined(__arm__) || defined(__thumb__)
1.150 + #define _CLOCKS_PER_SEC_ 100
1.151 ++#else
1.152 ++#if defined(__AVR32__)
1.153 ++#define _CLOCKS_PER_SEC_ 1000000
1.154 ++#endif
1.155 + #endif
1.156 + #endif /* !__rtems__ */
1.157 +
1.158 +diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4
1.159 +--- newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 1970-01-01 01:00:00.000000000 +0100
1.160 ++++ newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4 2009-05-22 09:57:49.000000000 +0200
1.161 +@@ -0,0 +1,382 @@
1.162 ++dnl aclocal.m4 generated automatically by aclocal 1.4-p6
1.163 ++
1.164 ++dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
1.165 ++dnl This file is free software; the Free Software Foundation
1.166 ++dnl gives unlimited permission to copy and/or distribute it,
1.167 ++dnl with or without modifications, as long as this notice is preserved.
1.168 ++
1.169 ++dnl This program is distributed in the hope that it will be useful,
1.170 ++dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
1.171 ++dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
1.172 ++dnl PARTICULAR PURPOSE.
1.173 ++
1.174 ++dnl This provides configure definitions used by all the newlib
1.175 ++dnl configure.in files.
1.176 ++
1.177 ++dnl Basic newlib configury. This calls basic introductory stuff,
1.178 ++dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs
1.179 ++dnl configure.host. The only argument is the relative path to the top
1.180 ++dnl newlib directory.
1.181 ++
1.182 ++AC_DEFUN(NEWLIB_CONFIGURE,
1.183 ++[
1.184 ++dnl Default to --enable-multilib
1.185 ++AC_ARG_ENABLE(multilib,
1.186 ++[ --enable-multilib build many library versions (default)],
1.187 ++[case "${enableval}" in
1.188 ++ yes) multilib=yes ;;
1.189 ++ no) multilib=no ;;
1.190 ++ *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
1.191 ++ esac], [multilib=yes])dnl
1.192 ++
1.193 ++dnl Support --enable-target-optspace
1.194 ++AC_ARG_ENABLE(target-optspace,
1.195 ++[ --enable-target-optspace optimize for space],
1.196 ++[case "${enableval}" in
1.197 ++ yes) target_optspace=yes ;;
1.198 ++ no) target_optspace=no ;;
1.199 ++ *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
1.200 ++ esac], [target_optspace=])dnl
1.201 ++
1.202 ++dnl Support --enable-malloc-debugging - currently only supported for Cygwin
1.203 ++AC_ARG_ENABLE(malloc-debugging,
1.204 ++[ --enable-malloc-debugging indicate malloc debugging requested],
1.205 ++[case "${enableval}" in
1.206 ++ yes) malloc_debugging=yes ;;
1.207 ++ no) malloc_debugging=no ;;
1.208 ++ *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
1.209 ++ esac], [malloc_debugging=])dnl
1.210 ++
1.211 ++dnl Support --enable-newlib-mb
1.212 ++AC_ARG_ENABLE(newlib-mb,
1.213 ++[ --enable-newlib-mb enable multibyte support],
1.214 ++[case "${enableval}" in
1.215 ++ yes) newlib_mb=yes ;;
1.216 ++ no) newlib_mb=no ;;
1.217 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
1.218 ++ esac], [newlib_mb=])dnl
1.219 ++
1.220 ++dnl Support --enable-newlib-iconv
1.221 ++AC_ARG_ENABLE(newlib-iconv,
1.222 ++[ --enable-newlib-iconv enable iconv library support],
1.223 ++[case "${enableval}" in
1.224 ++ yes) newlib_iconv=yes ;;
1.225 ++ no) newlib_iconv=no ;;
1.226 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;;
1.227 ++ esac], [newlib_iconv=])dnl
1.228 ++
1.229 ++dnl Support --enable-newlib-builtin-converters
1.230 ++AC_ARG_ENABLE(newlib-builtin-converters,
1.231 ++[ --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in],
1.232 ++[if test x${enableval} = x; then
1.233 ++ AC_MSG_ERROR(bad value ${enableval} for newlib-builtin-converters option - use comma-separated list)
1.234 ++ fi
1.235 ++ builtin_converters=${enableval}
1.236 ++ ], [builtin_converters=])dnl
1.237 ++
1.238 ++dnl Support --enable-newlib-multithread
1.239 ++AC_ARG_ENABLE(newlib-multithread,
1.240 ++[ --enable-newlib-multithread enable support for multiple threads],
1.241 ++[case "${enableval}" in
1.242 ++ yes) newlib_multithread=yes ;;
1.243 ++ no) newlib_multithread=no ;;
1.244 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
1.245 ++ esac], [newlib_multithread=yes])dnl
1.246 ++
1.247 ++dnl Support --enable-newlib-elix-level
1.248 ++AC_ARG_ENABLE(newlib-elix-level,
1.249 ++[ --enable-newlib-elix-level supply desired elix library level (1-4)],
1.250 ++[case "${enableval}" in
1.251 ++ 0) newlib_elix_level=0 ;;
1.252 ++ 1) newlib_elix_level=1 ;;
1.253 ++ 2) newlib_elix_level=2 ;;
1.254 ++ 3) newlib_elix_level=3 ;;
1.255 ++ 4) newlib_elix_level=4 ;;
1.256 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
1.257 ++ esac], [newlib_elix_level=0])dnl
1.258 ++
1.259 ++dnl Support --disable-newlib-io-float
1.260 ++AC_ARG_ENABLE(newlib-io-float,
1.261 ++[ --disable-newlib-io-float disable printf/scanf family float support],
1.262 ++[case "${enableval}" in
1.263 ++ yes) newlib_io_float=yes ;;
1.264 ++ no) newlib_io_float=no ;;
1.265 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
1.266 ++ esac], [newlib_io_float=yes])dnl
1.267 ++
1.268 ++dnl Support --disable-newlib-supplied-syscalls
1.269 ++AC_ARG_ENABLE(newlib-supplied-syscalls,
1.270 ++[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
1.271 ++[case "${enableval}" in
1.272 ++ yes) newlib_may_supply_syscalls=yes ;;
1.273 ++ no) newlib_may_supply_syscalls=no ;;
1.274 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
1.275 ++ esac], [newlib_may_supply_syscalls=yes])dnl
1.276 ++
1.277 ++AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
1.278 ++
1.279 ++dnl We may get other options which we don't document:
1.280 ++dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
1.281 ++
1.282 ++test -z "[$]{with_target_subdir}" && with_target_subdir=.
1.283 ++
1.284 ++if test "[$]{srcdir}" = "."; then
1.285 ++ if test "[$]{with_target_subdir}" != "."; then
1.286 ++ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
1.287 ++ else
1.288 ++ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
1.289 ++ fi
1.290 ++else
1.291 ++ newlib_basedir="[$]{srcdir}/$1"
1.292 ++fi
1.293 ++AC_SUBST(newlib_basedir)
1.294 ++
1.295 ++AC_CANONICAL_SYSTEM
1.296 ++
1.297 ++AM_INIT_AUTOMAKE(newlib, 1.12.0)
1.298 ++
1.299 ++# FIXME: We temporarily define our own version of AC_PROG_CC. This is
1.300 ++# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
1.301 ++# are probably using a cross compiler, which will not be able to fully
1.302 ++# link an executable. This should really be fixed in autoconf
1.303 ++# itself.
1.304 ++
1.305 ++AC_DEFUN(LIB_AC_PROG_CC,
1.306 ++[AC_BEFORE([$0], [AC_PROG_CPP])dnl
1.307 ++AC_CHECK_PROG(CC, gcc, gcc)
1.308 ++if test -z "$CC"; then
1.309 ++ AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
1.310 ++ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
1.311 ++fi
1.312 ++
1.313 ++AC_PROG_CC_GNU
1.314 ++
1.315 ++if test $ac_cv_prog_gcc = yes; then
1.316 ++ GCC=yes
1.317 ++dnl Check whether -g works, even if CFLAGS is set, in case the package
1.318 ++dnl plays around with CFLAGS (such as to build both debugging and
1.319 ++dnl normal versions of a library), tasteless as that idea is.
1.320 ++ ac_test_CFLAGS="${CFLAGS+set}"
1.321 ++ ac_save_CFLAGS="$CFLAGS"
1.322 ++ CFLAGS=
1.323 ++ AC_PROG_CC_G
1.324 ++ if test "$ac_test_CFLAGS" = set; then
1.325 ++ CFLAGS="$ac_save_CFLAGS"
1.326 ++ elif test $ac_cv_prog_cc_g = yes; then
1.327 ++ CFLAGS="-g -O2"
1.328 ++ else
1.329 ++ CFLAGS="-O2"
1.330 ++ fi
1.331 ++else
1.332 ++ GCC=
1.333 ++ test "${CFLAGS+set}" = set || CFLAGS="-g"
1.334 ++fi
1.335 ++])
1.336 ++
1.337 ++LIB_AC_PROG_CC
1.338 ++
1.339 ++AC_CHECK_TOOL(AS, as)
1.340 ++AC_CHECK_TOOL(AR, ar)
1.341 ++AC_CHECK_TOOL(RANLIB, ranlib, :)
1.342 ++
1.343 ++AC_PROG_INSTALL
1.344 ++
1.345 ++AM_MAINTAINER_MODE
1.346 ++
1.347 ++# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
1.348 ++# at least currently, we never actually build a program, so we never
1.349 ++# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
1.350 ++# fails, because we are probably configuring with a cross compiler
1.351 ++# which can't create executables. So we include AC_EXEEXT to keep
1.352 ++# automake happy, but we don't execute it, since we don't care about
1.353 ++# the result.
1.354 ++if false; then
1.355 ++ AC_EXEEXT
1.356 ++fi
1.357 ++
1.358 ++. [$]{newlib_basedir}/configure.host
1.359 ++
1.360 ++newlib_cflags="[$]{newlib_cflags} -fno-builtin"
1.361 ++
1.362 ++NEWLIB_CFLAGS=${newlib_cflags}
1.363 ++AC_SUBST(NEWLIB_CFLAGS)
1.364 ++
1.365 ++LDFLAGS=${ldflags}
1.366 ++AC_SUBST(LDFLAGS)
1.367 ++
1.368 ++AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
1.369 ++AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
1.370 ++AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
1.371 ++AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
1.372 ++AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
1.373 ++
1.374 ++AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
1.375 ++
1.376 ++# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we
1.377 ++# use oext, which is set in configure.host based on the target platform.
1.378 ++OBJEXT=${oext}
1.379 ++
1.380 ++AC_SUBST(OBJEXT)
1.381 ++AC_SUBST(oext)
1.382 ++AC_SUBST(aext)
1.383 ++
1.384 ++AC_SUBST(libm_machine_dir)
1.385 ++AC_SUBST(machine_dir)
1.386 ++AC_SUBST(sys_dir)
1.387 ++])
1.388 ++
1.389 ++# Do all the work for Automake. This macro actually does too much --
1.390 ++# some checks are only needed if your package does certain things.
1.391 ++# But this isn't really a big deal.
1.392 ++
1.393 ++# serial 1
1.394 ++
1.395 ++dnl Usage:
1.396 ++dnl AM_INIT_AUTOMAKE(package,version, [no-define])
1.397 ++
1.398 ++AC_DEFUN([AM_INIT_AUTOMAKE],
1.399 ++[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
1.400 ++AC_REQUIRE([AC_PROG_INSTALL])
1.401 ++PACKAGE=[$1]
1.402 ++AC_SUBST(PACKAGE)
1.403 ++VERSION=[$2]
1.404 ++AC_SUBST(VERSION)
1.405 ++dnl test to see if srcdir already configured
1.406 ++if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
1.407 ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
1.408 ++fi
1.409 ++ifelse([$3],,
1.410 ++AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
1.411 ++AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
1.412 ++AC_REQUIRE([AM_SANITY_CHECK])
1.413 ++AC_REQUIRE([AC_ARG_PROGRAM])
1.414 ++dnl FIXME This is truly gross.
1.415 ++missing_dir=`cd $ac_aux_dir && pwd`
1.416 ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
1.417 ++AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
1.418 ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
1.419 ++AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
1.420 ++AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
1.421 ++AC_REQUIRE([AC_PROG_MAKE_SET])])
1.422 ++
1.423 ++# Copyright 2002 Free Software Foundation, Inc.
1.424 ++
1.425 ++# This program is free software; you can redistribute it and/or modify
1.426 ++# it under the terms of the GNU General Public License as published by
1.427 ++# the Free Software Foundation; either version 2, or (at your option)
1.428 ++# any later version.
1.429 ++
1.430 ++# This program is distributed in the hope that it will be useful,
1.431 ++# but WITHOUT ANY WARRANTY; without even the implied warranty of
1.432 ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
1.433 ++# GNU General Public License for more details.
1.434 ++
1.435 ++# You should have received a copy of the GNU General Public License
1.436 ++# along with this program; if not, write to the Free Software
1.437 ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
1.438 ++
1.439 ++# AM_AUTOMAKE_VERSION(VERSION)
1.440 ++# ----------------------------
1.441 ++# Automake X.Y traces this macro to ensure aclocal.m4 has been
1.442 ++# generated from the m4 files accompanying Automake X.Y.
1.443 ++AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
1.444 ++
1.445 ++# AM_SET_CURRENT_AUTOMAKE_VERSION
1.446 ++# -------------------------------
1.447 ++# Call AM_AUTOMAKE_VERSION so it can be traced.
1.448 ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
1.449 ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
1.450 ++ [AM_AUTOMAKE_VERSION([1.4-p6])])
1.451 ++
1.452 ++#
1.453 ++# Check to make sure that the build environment is sane.
1.454 ++#
1.455 ++
1.456 ++AC_DEFUN([AM_SANITY_CHECK],
1.457 ++[AC_MSG_CHECKING([whether build environment is sane])
1.458 ++# Just in case
1.459 ++sleep 1
1.460 ++echo timestamp > conftestfile
1.461 ++# Do `set' in a subshell so we don't clobber the current shell's
1.462 ++# arguments. Must try -L first in case configure is actually a
1.463 ++# symlink; some systems play weird games with the mod time of symlinks
1.464 ++# (eg FreeBSD returns the mod time of the symlink's containing
1.465 ++# directory).
1.466 ++if (
1.467 ++ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
1.468 ++ if test "[$]*" = "X"; then
1.469 ++ # -L didn't work.
1.470 ++ set X `ls -t $srcdir/configure conftestfile`
1.471 ++ fi
1.472 ++ if test "[$]*" != "X $srcdir/configure conftestfile" \
1.473 ++ && test "[$]*" != "X conftestfile $srcdir/configure"; then
1.474 ++
1.475 ++ # If neither matched, then we have a broken ls. This can happen
1.476 ++ # if, for instance, CONFIG_SHELL is bash and it inherits a
1.477 ++ # broken ls alias from the environment. This has actually
1.478 ++ # happened. Such a system could not be considered "sane".
1.479 ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
1.480 ++alias in your environment])
1.481 ++ fi
1.482 ++
1.483 ++ test "[$]2" = conftestfile
1.484 ++ )
1.485 ++then
1.486 ++ # Ok.
1.487 ++ :
1.488 ++else
1.489 ++ AC_MSG_ERROR([newly created file is older than distributed files!
1.490 ++Check your system clock])
1.491 ++fi
1.492 ++rm -f conftest*
1.493 ++AC_MSG_RESULT(yes)])
1.494 ++
1.495 ++dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
1.496 ++dnl The program must properly implement --version.
1.497 ++AC_DEFUN([AM_MISSING_PROG],
1.498 ++[AC_MSG_CHECKING(for working $2)
1.499 ++# Run test in a subshell; some versions of sh will print an error if
1.500 ++# an executable is not found, even if stderr is redirected.
1.501 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.502 ++if ($2 --version) < /dev/null > /dev/null 2>&1; then
1.503 ++ $1=$2
1.504 ++ AC_MSG_RESULT(found)
1.505 ++else
1.506 ++ $1="$3/missing $2"
1.507 ++ AC_MSG_RESULT(missing)
1.508 ++fi
1.509 ++AC_SUBST($1)])
1.510 ++
1.511 ++# Define a conditional.
1.512 ++
1.513 ++AC_DEFUN([AM_CONDITIONAL],
1.514 ++[AC_SUBST($1_TRUE)
1.515 ++AC_SUBST($1_FALSE)
1.516 ++if $2; then
1.517 ++ $1_TRUE=
1.518 ++ $1_FALSE='#'
1.519 ++else
1.520 ++ $1_TRUE='#'
1.521 ++ $1_FALSE=
1.522 ++fi])
1.523 ++
1.524 ++# Add --enable-maintainer-mode option to configure.
1.525 ++# From Jim Meyering
1.526 ++
1.527 ++# serial 1
1.528 ++
1.529 ++AC_DEFUN([AM_MAINTAINER_MODE],
1.530 ++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
1.531 ++ dnl maintainer-mode is disabled by default
1.532 ++ AC_ARG_ENABLE(maintainer-mode,
1.533 ++[ --enable-maintainer-mode enable make rules and dependencies not useful
1.534 ++ (and sometimes confusing) to the casual installer],
1.535 ++ USE_MAINTAINER_MODE=$enableval,
1.536 ++ USE_MAINTAINER_MODE=no)
1.537 ++ AC_MSG_RESULT($USE_MAINTAINER_MODE)
1.538 ++ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
1.539 ++ MAINT=$MAINTAINER_MODE_TRUE
1.540 ++ AC_SUBST(MAINT)dnl
1.541 ++]
1.542 ++)
1.543 ++
1.544 +diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure newlib-1.17.0-new/newlib/libc/machine/avr32/configure
1.545 +--- newlib-1.17.0/newlib/libc/machine/avr32/configure 1970-01-01 01:00:00.000000000 +0100
1.546 ++++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure 2009-05-22 09:57:49.000000000 +0200
1.547 +@@ -0,0 +1,3950 @@
1.548 ++#! /bin/sh
1.549 ++# Guess values for system-dependent variables and create Makefiles.
1.550 ++# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION.
1.551 ++#
1.552 ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
1.553 ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.554 ++# This configure script is free software; the Free Software Foundation
1.555 ++# gives unlimited permission to copy, distribute and modify it.
1.556 ++## --------------------- ##
1.557 ++## M4sh Initialization. ##
1.558 ++## --------------------- ##
1.559 ++
1.560 ++# Be more Bourne compatible
1.561 ++DUALCASE=1; export DUALCASE # for MKS sh
1.562 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.563 ++ emulate sh
1.564 ++ NULLCMD=:
1.565 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.566 ++ # is contrary to our usage. Disable this feature.
1.567 ++ alias -g '${1+"$@"}'='"$@"'
1.568 ++ setopt NO_GLOB_SUBST
1.569 ++else
1.570 ++ case `(set -o) 2>/dev/null` in
1.571 ++ *posix*) set -o posix ;;
1.572 ++esac
1.573 ++
1.574 ++fi
1.575 ++
1.576 ++
1.577 ++
1.578 ++
1.579 ++# PATH needs CR
1.580 ++# Avoid depending upon Character Ranges.
1.581 ++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.582 ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.583 ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.584 ++as_cr_digits='0123456789'
1.585 ++as_cr_alnum=$as_cr_Letters$as_cr_digits
1.586 ++
1.587 ++# The user is always right.
1.588 ++if test "${PATH_SEPARATOR+set}" != set; then
1.589 ++ echo "#! /bin/sh" >conf$$.sh
1.590 ++ echo "exit 0" >>conf$$.sh
1.591 ++ chmod +x conf$$.sh
1.592 ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.593 ++ PATH_SEPARATOR=';'
1.594 ++ else
1.595 ++ PATH_SEPARATOR=:
1.596 ++ fi
1.597 ++ rm -f conf$$.sh
1.598 ++fi
1.599 ++
1.600 ++# Support unset when possible.
1.601 ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.602 ++ as_unset=unset
1.603 ++else
1.604 ++ as_unset=false
1.605 ++fi
1.606 ++
1.607 ++
1.608 ++# IFS
1.609 ++# We need space, tab and new line, in precisely that order. Quoting is
1.610 ++# there to prevent editors from complaining about space-tab.
1.611 ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
1.612 ++# splitting by setting IFS to empty value.)
1.613 ++as_nl='
1.614 ++'
1.615 ++IFS=" "" $as_nl"
1.616 ++
1.617 ++# Find who we are. Look in the path if we contain no directory separator.
1.618 ++case $0 in
1.619 ++ *[\\/]* ) as_myself=$0 ;;
1.620 ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.621 ++for as_dir in $PATH
1.622 ++do
1.623 ++ IFS=$as_save_IFS
1.624 ++ test -z "$as_dir" && as_dir=.
1.625 ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.626 ++done
1.627 ++IFS=$as_save_IFS
1.628 ++
1.629 ++ ;;
1.630 ++esac
1.631 ++# We did not find ourselves, most probably we were run as `sh COMMAND'
1.632 ++# in which case we are not to be found in the path.
1.633 ++if test "x$as_myself" = x; then
1.634 ++ as_myself=$0
1.635 ++fi
1.636 ++if test ! -f "$as_myself"; then
1.637 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
1.638 ++ { (exit 1); exit 1; }
1.639 ++fi
1.640 ++
1.641 ++# Work around bugs in pre-3.0 UWIN ksh.
1.642 ++for as_var in ENV MAIL MAILPATH
1.643 ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.644 ++done
1.645 ++PS1='$ '
1.646 ++PS2='> '
1.647 ++PS4='+ '
1.648 ++
1.649 ++# NLS nuisances.
1.650 ++for as_var in \
1.651 ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
1.652 ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
1.653 ++ LC_TELEPHONE LC_TIME
1.654 ++do
1.655 ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1.656 ++ eval $as_var=C; export $as_var
1.657 ++ else
1.658 ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.659 ++ fi
1.660 ++done
1.661 ++
1.662 ++# Required to use basename.
1.663 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.664 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.665 ++ as_expr=expr
1.666 ++else
1.667 ++ as_expr=false
1.668 ++fi
1.669 ++
1.670 ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
1.671 ++ as_basename=basename
1.672 ++else
1.673 ++ as_basename=false
1.674 ++fi
1.675 ++
1.676 ++
1.677 ++# Name of the executable.
1.678 ++as_me=`$as_basename -- "$0" ||
1.679 ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1.680 ++ X"$0" : 'X\(//\)$' \| \
1.681 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.682 ++echo X/"$0" |
1.683 ++ sed '/^.*\/\([^/][^/]*\)\/*$/{
1.684 ++ s//\1/
1.685 ++ q
1.686 ++ }
1.687 ++ /^X\/\(\/\/\)$/{
1.688 ++ s//\1/
1.689 ++ q
1.690 ++ }
1.691 ++ /^X\/\(\/\).*/{
1.692 ++ s//\1/
1.693 ++ q
1.694 ++ }
1.695 ++ s/.*/./; q'`
1.696 ++
1.697 ++# CDPATH.
1.698 ++$as_unset CDPATH
1.699 ++
1.700 ++
1.701 ++if test "x$CONFIG_SHELL" = x; then
1.702 ++ if (eval ":") 2>/dev/null; then
1.703 ++ as_have_required=yes
1.704 ++else
1.705 ++ as_have_required=no
1.706 ++fi
1.707 ++
1.708 ++ if test $as_have_required = yes && (eval ":
1.709 ++(as_func_return () {
1.710 ++ (exit \$1)
1.711 ++}
1.712 ++as_func_success () {
1.713 ++ as_func_return 0
1.714 ++}
1.715 ++as_func_failure () {
1.716 ++ as_func_return 1
1.717 ++}
1.718 ++as_func_ret_success () {
1.719 ++ return 0
1.720 ++}
1.721 ++as_func_ret_failure () {
1.722 ++ return 1
1.723 ++}
1.724 ++
1.725 ++exitcode=0
1.726 ++if as_func_success; then
1.727 ++ :
1.728 ++else
1.729 ++ exitcode=1
1.730 ++ echo as_func_success failed.
1.731 ++fi
1.732 ++
1.733 ++if as_func_failure; then
1.734 ++ exitcode=1
1.735 ++ echo as_func_failure succeeded.
1.736 ++fi
1.737 ++
1.738 ++if as_func_ret_success; then
1.739 ++ :
1.740 ++else
1.741 ++ exitcode=1
1.742 ++ echo as_func_ret_success failed.
1.743 ++fi
1.744 ++
1.745 ++if as_func_ret_failure; then
1.746 ++ exitcode=1
1.747 ++ echo as_func_ret_failure succeeded.
1.748 ++fi
1.749 ++
1.750 ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
1.751 ++ :
1.752 ++else
1.753 ++ exitcode=1
1.754 ++ echo positional parameters were not saved.
1.755 ++fi
1.756 ++
1.757 ++test \$exitcode = 0) || { (exit 1); exit 1; }
1.758 ++
1.759 ++(
1.760 ++ as_lineno_1=\$LINENO
1.761 ++ as_lineno_2=\$LINENO
1.762 ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
1.763 ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
1.764 ++") 2> /dev/null; then
1.765 ++ :
1.766 ++else
1.767 ++ as_candidate_shells=
1.768 ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.769 ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1.770 ++do
1.771 ++ IFS=$as_save_IFS
1.772 ++ test -z "$as_dir" && as_dir=.
1.773 ++ case $as_dir in
1.774 ++ /*)
1.775 ++ for as_base in sh bash ksh sh5; do
1.776 ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
1.777 ++ done;;
1.778 ++ esac
1.779 ++done
1.780 ++IFS=$as_save_IFS
1.781 ++
1.782 ++
1.783 ++ for as_shell in $as_candidate_shells $SHELL; do
1.784 ++ # Try only shells that exist, to save several forks.
1.785 ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
1.786 ++ { ("$as_shell") 2> /dev/null <<\_ASEOF
1.787 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.788 ++ emulate sh
1.789 ++ NULLCMD=:
1.790 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.791 ++ # is contrary to our usage. Disable this feature.
1.792 ++ alias -g '${1+"$@"}'='"$@"'
1.793 ++ setopt NO_GLOB_SUBST
1.794 ++else
1.795 ++ case `(set -o) 2>/dev/null` in
1.796 ++ *posix*) set -o posix ;;
1.797 ++esac
1.798 ++
1.799 ++fi
1.800 ++
1.801 ++
1.802 ++:
1.803 ++_ASEOF
1.804 ++}; then
1.805 ++ CONFIG_SHELL=$as_shell
1.806 ++ as_have_required=yes
1.807 ++ if { "$as_shell" 2> /dev/null <<\_ASEOF
1.808 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.809 ++ emulate sh
1.810 ++ NULLCMD=:
1.811 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.812 ++ # is contrary to our usage. Disable this feature.
1.813 ++ alias -g '${1+"$@"}'='"$@"'
1.814 ++ setopt NO_GLOB_SUBST
1.815 ++else
1.816 ++ case `(set -o) 2>/dev/null` in
1.817 ++ *posix*) set -o posix ;;
1.818 ++esac
1.819 ++
1.820 ++fi
1.821 ++
1.822 ++
1.823 ++:
1.824 ++(as_func_return () {
1.825 ++ (exit $1)
1.826 ++}
1.827 ++as_func_success () {
1.828 ++ as_func_return 0
1.829 ++}
1.830 ++as_func_failure () {
1.831 ++ as_func_return 1
1.832 ++}
1.833 ++as_func_ret_success () {
1.834 ++ return 0
1.835 ++}
1.836 ++as_func_ret_failure () {
1.837 ++ return 1
1.838 ++}
1.839 ++
1.840 ++exitcode=0
1.841 ++if as_func_success; then
1.842 ++ :
1.843 ++else
1.844 ++ exitcode=1
1.845 ++ echo as_func_success failed.
1.846 ++fi
1.847 ++
1.848 ++if as_func_failure; then
1.849 ++ exitcode=1
1.850 ++ echo as_func_failure succeeded.
1.851 ++fi
1.852 ++
1.853 ++if as_func_ret_success; then
1.854 ++ :
1.855 ++else
1.856 ++ exitcode=1
1.857 ++ echo as_func_ret_success failed.
1.858 ++fi
1.859 ++
1.860 ++if as_func_ret_failure; then
1.861 ++ exitcode=1
1.862 ++ echo as_func_ret_failure succeeded.
1.863 ++fi
1.864 ++
1.865 ++if ( set x; as_func_ret_success y && test x = "$1" ); then
1.866 ++ :
1.867 ++else
1.868 ++ exitcode=1
1.869 ++ echo positional parameters were not saved.
1.870 ++fi
1.871 ++
1.872 ++test $exitcode = 0) || { (exit 1); exit 1; }
1.873 ++
1.874 ++(
1.875 ++ as_lineno_1=$LINENO
1.876 ++ as_lineno_2=$LINENO
1.877 ++ test "x$as_lineno_1" != "x$as_lineno_2" &&
1.878 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
1.879 ++
1.880 ++_ASEOF
1.881 ++}; then
1.882 ++ break
1.883 ++fi
1.884 ++
1.885 ++fi
1.886 ++
1.887 ++ done
1.888 ++
1.889 ++ if test "x$CONFIG_SHELL" != x; then
1.890 ++ for as_var in BASH_ENV ENV
1.891 ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.892 ++ done
1.893 ++ export CONFIG_SHELL
1.894 ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
1.895 ++fi
1.896 ++
1.897 ++
1.898 ++ if test $as_have_required = no; then
1.899 ++ echo This script requires a shell more modern than all the
1.900 ++ echo shells that I found on your system. Please install a
1.901 ++ echo modern shell, or manually run the script under such a
1.902 ++ echo shell if you do have one.
1.903 ++ { (exit 1); exit 1; }
1.904 ++fi
1.905 ++
1.906 ++
1.907 ++fi
1.908 ++
1.909 ++fi
1.910 ++
1.911 ++
1.912 ++
1.913 ++(eval "as_func_return () {
1.914 ++ (exit \$1)
1.915 ++}
1.916 ++as_func_success () {
1.917 ++ as_func_return 0
1.918 ++}
1.919 ++as_func_failure () {
1.920 ++ as_func_return 1
1.921 ++}
1.922 ++as_func_ret_success () {
1.923 ++ return 0
1.924 ++}
1.925 ++as_func_ret_failure () {
1.926 ++ return 1
1.927 ++}
1.928 ++
1.929 ++exitcode=0
1.930 ++if as_func_success; then
1.931 ++ :
1.932 ++else
1.933 ++ exitcode=1
1.934 ++ echo as_func_success failed.
1.935 ++fi
1.936 ++
1.937 ++if as_func_failure; then
1.938 ++ exitcode=1
1.939 ++ echo as_func_failure succeeded.
1.940 ++fi
1.941 ++
1.942 ++if as_func_ret_success; then
1.943 ++ :
1.944 ++else
1.945 ++ exitcode=1
1.946 ++ echo as_func_ret_success failed.
1.947 ++fi
1.948 ++
1.949 ++if as_func_ret_failure; then
1.950 ++ exitcode=1
1.951 ++ echo as_func_ret_failure succeeded.
1.952 ++fi
1.953 ++
1.954 ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
1.955 ++ :
1.956 ++else
1.957 ++ exitcode=1
1.958 ++ echo positional parameters were not saved.
1.959 ++fi
1.960 ++
1.961 ++test \$exitcode = 0") || {
1.962 ++ echo No shell found that supports shell functions.
1.963 ++ echo Please tell autoconf@gnu.org about your system,
1.964 ++ echo including any error possibly output before this
1.965 ++ echo message
1.966 ++}
1.967 ++
1.968 ++
1.969 ++
1.970 ++ as_lineno_1=$LINENO
1.971 ++ as_lineno_2=$LINENO
1.972 ++ test "x$as_lineno_1" != "x$as_lineno_2" &&
1.973 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
1.974 ++
1.975 ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1.976 ++ # uniformly replaced by the line number. The first 'sed' inserts a
1.977 ++ # line-number line after each line using $LINENO; the second 'sed'
1.978 ++ # does the real work. The second script uses 'N' to pair each
1.979 ++ # line-number line with the line containing $LINENO, and appends
1.980 ++ # trailing '-' during substitution so that $LINENO is not a special
1.981 ++ # case at line end.
1.982 ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1.983 ++ # scripts with optimization help from Paolo Bonzini. Blame Lee
1.984 ++ # E. McMahon (1931-1989) for sed's syntax. :-)
1.985 ++ sed -n '
1.986 ++ p
1.987 ++ /[$]LINENO/=
1.988 ++ ' <$as_myself |
1.989 ++ sed '
1.990 ++ s/[$]LINENO.*/&-/
1.991 ++ t lineno
1.992 ++ b
1.993 ++ :lineno
1.994 ++ N
1.995 ++ :loop
1.996 ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
1.997 ++ t loop
1.998 ++ s/-\n.*//
1.999 ++ ' >$as_me.lineno &&
1.1000 ++ chmod +x "$as_me.lineno" ||
1.1001 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
1.1002 ++ { (exit 1); exit 1; }; }
1.1003 ++
1.1004 ++ # Don't try to exec as it changes $[0], causing all sort of problems
1.1005 ++ # (the dirname of $[0] is not the place where we might find the
1.1006 ++ # original and so on. Autoconf is especially sensitive to this).
1.1007 ++ . "./$as_me.lineno"
1.1008 ++ # Exit status is that of the last command.
1.1009 ++ exit
1.1010 ++}
1.1011 ++
1.1012 ++
1.1013 ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
1.1014 ++ as_dirname=dirname
1.1015 ++else
1.1016 ++ as_dirname=false
1.1017 ++fi
1.1018 ++
1.1019 ++ECHO_C= ECHO_N= ECHO_T=
1.1020 ++case `echo -n x` in
1.1021 ++-n*)
1.1022 ++ case `echo 'x\c'` in
1.1023 ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
1.1024 ++ *) ECHO_C='\c';;
1.1025 ++ esac;;
1.1026 ++*)
1.1027 ++ ECHO_N='-n';;
1.1028 ++esac
1.1029 ++
1.1030 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.1031 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.1032 ++ as_expr=expr
1.1033 ++else
1.1034 ++ as_expr=false
1.1035 ++fi
1.1036 ++
1.1037 ++rm -f conf$$ conf$$.exe conf$$.file
1.1038 ++if test -d conf$$.dir; then
1.1039 ++ rm -f conf$$.dir/conf$$.file
1.1040 ++else
1.1041 ++ rm -f conf$$.dir
1.1042 ++ mkdir conf$$.dir
1.1043 ++fi
1.1044 ++echo >conf$$.file
1.1045 ++if ln -s conf$$.file conf$$ 2>/dev/null; then
1.1046 ++ as_ln_s='ln -s'
1.1047 ++ # ... but there are two gotchas:
1.1048 ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
1.1049 ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
1.1050 ++ # In both cases, we have to default to `cp -p'.
1.1051 ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
1.1052 ++ as_ln_s='cp -p'
1.1053 ++elif ln conf$$.file conf$$ 2>/dev/null; then
1.1054 ++ as_ln_s=ln
1.1055 ++else
1.1056 ++ as_ln_s='cp -p'
1.1057 ++fi
1.1058 ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
1.1059 ++rmdir conf$$.dir 2>/dev/null
1.1060 ++
1.1061 ++if mkdir -p . 2>/dev/null; then
1.1062 ++ as_mkdir_p=:
1.1063 ++else
1.1064 ++ test -d ./-p && rmdir ./-p
1.1065 ++ as_mkdir_p=false
1.1066 ++fi
1.1067 ++
1.1068 ++if test -x / >/dev/null 2>&1; then
1.1069 ++ as_test_x='test -x'
1.1070 ++else
1.1071 ++ if ls -dL / >/dev/null 2>&1; then
1.1072 ++ as_ls_L_option=L
1.1073 ++ else
1.1074 ++ as_ls_L_option=
1.1075 ++ fi
1.1076 ++ as_test_x='
1.1077 ++ eval sh -c '\''
1.1078 ++ if test -d "$1"; then
1.1079 ++ test -d "$1/.";
1.1080 ++ else
1.1081 ++ case $1 in
1.1082 ++ -*)set "./$1";;
1.1083 ++ esac;
1.1084 ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
1.1085 ++ ???[sx]*):;;*)false;;esac;fi
1.1086 ++ '\'' sh
1.1087 ++ '
1.1088 ++fi
1.1089 ++as_executable_p=$as_test_x
1.1090 ++
1.1091 ++# Sed expression to map a string onto a valid CPP name.
1.1092 ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1.1093 ++
1.1094 ++# Sed expression to map a string onto a valid variable name.
1.1095 ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1.1096 ++
1.1097 ++
1.1098 ++
1.1099 ++exec 7<&0 </dev/null 6>&1
1.1100 ++
1.1101 ++# Name of the host.
1.1102 ++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
1.1103 ++# so uname gets run too.
1.1104 ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
1.1105 ++
1.1106 ++#
1.1107 ++# Initializations.
1.1108 ++#
1.1109 ++ac_default_prefix=/usr/local
1.1110 ++ac_clean_files=
1.1111 ++ac_config_libobj_dir=.
1.1112 ++LIBOBJS=
1.1113 ++cross_compiling=no
1.1114 ++subdirs=
1.1115 ++MFLAGS=
1.1116 ++MAKEFLAGS=
1.1117 ++SHELL=${CONFIG_SHELL-/bin/sh}
1.1118 ++
1.1119 ++# Identity of this package.
1.1120 ++PACKAGE_NAME='newlib'
1.1121 ++PACKAGE_TARNAME='newlib'
1.1122 ++PACKAGE_VERSION='NEWLIB_VERSION'
1.1123 ++PACKAGE_STRING='newlib NEWLIB_VERSION'
1.1124 ++PACKAGE_BUGREPORT=''
1.1125 ++
1.1126 ++ac_unique_file="Makefile.am"
1.1127 ++ac_subst_vars='SHELL
1.1128 ++PATH_SEPARATOR
1.1129 ++PACKAGE_NAME
1.1130 ++PACKAGE_TARNAME
1.1131 ++PACKAGE_VERSION
1.1132 ++PACKAGE_STRING
1.1133 ++PACKAGE_BUGREPORT
1.1134 ++exec_prefix
1.1135 ++prefix
1.1136 ++program_transform_name
1.1137 ++bindir
1.1138 ++sbindir
1.1139 ++libexecdir
1.1140 ++datarootdir
1.1141 ++datadir
1.1142 ++sysconfdir
1.1143 ++sharedstatedir
1.1144 ++localstatedir
1.1145 ++includedir
1.1146 ++oldincludedir
1.1147 ++docdir
1.1148 ++infodir
1.1149 ++htmldir
1.1150 ++dvidir
1.1151 ++pdfdir
1.1152 ++psdir
1.1153 ++libdir
1.1154 ++localedir
1.1155 ++mandir
1.1156 ++DEFS
1.1157 ++ECHO_C
1.1158 ++ECHO_N
1.1159 ++ECHO_T
1.1160 ++LIBS
1.1161 ++build_alias
1.1162 ++host_alias
1.1163 ++target_alias
1.1164 ++MAY_SUPPLY_SYSCALLS_TRUE
1.1165 ++MAY_SUPPLY_SYSCALLS_FALSE
1.1166 ++newlib_basedir
1.1167 ++build
1.1168 ++build_cpu
1.1169 ++build_vendor
1.1170 ++build_os
1.1171 ++host
1.1172 ++host_cpu
1.1173 ++host_vendor
1.1174 ++host_os
1.1175 ++target
1.1176 ++target_cpu
1.1177 ++target_vendor
1.1178 ++target_os
1.1179 ++INSTALL_PROGRAM
1.1180 ++INSTALL_SCRIPT
1.1181 ++INSTALL_DATA
1.1182 ++PACKAGE
1.1183 ++VERSION
1.1184 ++ACLOCAL
1.1185 ++AUTOCONF
1.1186 ++AUTOMAKE
1.1187 ++AUTOHEADER
1.1188 ++MAKEINFO
1.1189 ++SET_MAKE
1.1190 ++CC
1.1191 ++AS
1.1192 ++AR
1.1193 ++RANLIB
1.1194 ++MAINTAINER_MODE_TRUE
1.1195 ++MAINTAINER_MODE_FALSE
1.1196 ++MAINT
1.1197 ++NEWLIB_CFLAGS
1.1198 ++LDFLAGS
1.1199 ++ELIX_LEVEL_0_TRUE
1.1200 ++ELIX_LEVEL_0_FALSE
1.1201 ++ELIX_LEVEL_1_TRUE
1.1202 ++ELIX_LEVEL_1_FALSE
1.1203 ++ELIX_LEVEL_2_TRUE
1.1204 ++ELIX_LEVEL_2_FALSE
1.1205 ++ELIX_LEVEL_3_TRUE
1.1206 ++ELIX_LEVEL_3_FALSE
1.1207 ++ELIX_LEVEL_4_TRUE
1.1208 ++ELIX_LEVEL_4_FALSE
1.1209 ++USE_LIBTOOL_TRUE
1.1210 ++USE_LIBTOOL_FALSE
1.1211 ++OBJEXT
1.1212 ++oext
1.1213 ++aext
1.1214 ++libm_machine_dir
1.1215 ++machine_dir
1.1216 ++sys_dir
1.1217 ++LIBOBJS
1.1218 ++LTLIBOBJS'
1.1219 ++ac_subst_files=''
1.1220 ++ ac_precious_vars='build_alias
1.1221 ++host_alias
1.1222 ++target_alias'
1.1223 ++
1.1224 ++
1.1225 ++# Initialize some variables set by options.
1.1226 ++ac_init_help=
1.1227 ++ac_init_version=false
1.1228 ++# The variables have the same names as the options, with
1.1229 ++# dashes changed to underlines.
1.1230 ++cache_file=/dev/null
1.1231 ++exec_prefix=NONE
1.1232 ++no_create=
1.1233 ++no_recursion=
1.1234 ++prefix=NONE
1.1235 ++program_prefix=NONE
1.1236 ++program_suffix=NONE
1.1237 ++program_transform_name=s,x,x,
1.1238 ++silent=
1.1239 ++site=
1.1240 ++srcdir=
1.1241 ++verbose=
1.1242 ++x_includes=NONE
1.1243 ++x_libraries=NONE
1.1244 ++
1.1245 ++# Installation directory options.
1.1246 ++# These are left unexpanded so users can "make install exec_prefix=/foo"
1.1247 ++# and all the variables that are supposed to be based on exec_prefix
1.1248 ++# by default will actually change.
1.1249 ++# Use braces instead of parens because sh, perl, etc. also accept them.
1.1250 ++# (The list follows the same order as the GNU Coding Standards.)
1.1251 ++bindir='${exec_prefix}/bin'
1.1252 ++sbindir='${exec_prefix}/sbin'
1.1253 ++libexecdir='${exec_prefix}/libexec'
1.1254 ++datarootdir='${prefix}/share'
1.1255 ++datadir='${datarootdir}'
1.1256 ++sysconfdir='${prefix}/etc'
1.1257 ++sharedstatedir='${prefix}/com'
1.1258 ++localstatedir='${prefix}/var'
1.1259 ++includedir='${prefix}/include'
1.1260 ++oldincludedir='/usr/include'
1.1261 ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
1.1262 ++infodir='${datarootdir}/info'
1.1263 ++htmldir='${docdir}'
1.1264 ++dvidir='${docdir}'
1.1265 ++pdfdir='${docdir}'
1.1266 ++psdir='${docdir}'
1.1267 ++libdir='${exec_prefix}/lib'
1.1268 ++localedir='${datarootdir}/locale'
1.1269 ++mandir='${datarootdir}/man'
1.1270 ++
1.1271 ++ac_prev=
1.1272 ++ac_dashdash=
1.1273 ++for ac_option
1.1274 ++do
1.1275 ++ # If the previous option needs an argument, assign it.
1.1276 ++ if test -n "$ac_prev"; then
1.1277 ++ eval $ac_prev=\$ac_option
1.1278 ++ ac_prev=
1.1279 ++ continue
1.1280 ++ fi
1.1281 ++
1.1282 ++ case $ac_option in
1.1283 ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
1.1284 ++ *) ac_optarg=yes ;;
1.1285 ++ esac
1.1286 ++
1.1287 ++ # Accept the important Cygnus configure options, so we can diagnose typos.
1.1288 ++
1.1289 ++ case $ac_dashdash$ac_option in
1.1290 ++ --)
1.1291 ++ ac_dashdash=yes ;;
1.1292 ++
1.1293 ++ -bindir | --bindir | --bindi | --bind | --bin | --bi)
1.1294 ++ ac_prev=bindir ;;
1.1295 ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
1.1296 ++ bindir=$ac_optarg ;;
1.1297 ++
1.1298 ++ -build | --build | --buil | --bui | --bu)
1.1299 ++ ac_prev=build_alias ;;
1.1300 ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
1.1301 ++ build_alias=$ac_optarg ;;
1.1302 ++
1.1303 ++ -cache-file | --cache-file | --cache-fil | --cache-fi \
1.1304 ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
1.1305 ++ ac_prev=cache_file ;;
1.1306 ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
1.1307 ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
1.1308 ++ cache_file=$ac_optarg ;;
1.1309 ++
1.1310 ++ --config-cache | -C)
1.1311 ++ cache_file=config.cache ;;
1.1312 ++
1.1313 ++ -datadir | --datadir | --datadi | --datad)
1.1314 ++ ac_prev=datadir ;;
1.1315 ++ -datadir=* | --datadir=* | --datadi=* | --datad=*)
1.1316 ++ datadir=$ac_optarg ;;
1.1317 ++
1.1318 ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
1.1319 ++ | --dataroo | --dataro | --datar)
1.1320 ++ ac_prev=datarootdir ;;
1.1321 ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
1.1322 ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
1.1323 ++ datarootdir=$ac_optarg ;;
1.1324 ++
1.1325 ++ -disable-* | --disable-*)
1.1326 ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
1.1327 ++ # Reject names that are not valid shell variable names.
1.1328 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.1329 ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
1.1330 ++ { (exit 1); exit 1; }; }
1.1331 ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
1.1332 ++ eval enable_$ac_feature=no ;;
1.1333 ++
1.1334 ++ -docdir | --docdir | --docdi | --doc | --do)
1.1335 ++ ac_prev=docdir ;;
1.1336 ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
1.1337 ++ docdir=$ac_optarg ;;
1.1338 ++
1.1339 ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
1.1340 ++ ac_prev=dvidir ;;
1.1341 ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
1.1342 ++ dvidir=$ac_optarg ;;
1.1343 ++
1.1344 ++ -enable-* | --enable-*)
1.1345 ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
1.1346 ++ # Reject names that are not valid shell variable names.
1.1347 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.1348 ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
1.1349 ++ { (exit 1); exit 1; }; }
1.1350 ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
1.1351 ++ eval enable_$ac_feature=\$ac_optarg ;;
1.1352 ++
1.1353 ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
1.1354 ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
1.1355 ++ | --exec | --exe | --ex)
1.1356 ++ ac_prev=exec_prefix ;;
1.1357 ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
1.1358 ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
1.1359 ++ | --exec=* | --exe=* | --ex=*)
1.1360 ++ exec_prefix=$ac_optarg ;;
1.1361 ++
1.1362 ++ -gas | --gas | --ga | --g)
1.1363 ++ # Obsolete; use --with-gas.
1.1364 ++ with_gas=yes ;;
1.1365 ++
1.1366 ++ -help | --help | --hel | --he | -h)
1.1367 ++ ac_init_help=long ;;
1.1368 ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
1.1369 ++ ac_init_help=recursive ;;
1.1370 ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
1.1371 ++ ac_init_help=short ;;
1.1372 ++
1.1373 ++ -host | --host | --hos | --ho)
1.1374 ++ ac_prev=host_alias ;;
1.1375 ++ -host=* | --host=* | --hos=* | --ho=*)
1.1376 ++ host_alias=$ac_optarg ;;
1.1377 ++
1.1378 ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
1.1379 ++ ac_prev=htmldir ;;
1.1380 ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
1.1381 ++ | --ht=*)
1.1382 ++ htmldir=$ac_optarg ;;
1.1383 ++
1.1384 ++ -includedir | --includedir | --includedi | --included | --include \
1.1385 ++ | --includ | --inclu | --incl | --inc)
1.1386 ++ ac_prev=includedir ;;
1.1387 ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
1.1388 ++ | --includ=* | --inclu=* | --incl=* | --inc=*)
1.1389 ++ includedir=$ac_optarg ;;
1.1390 ++
1.1391 ++ -infodir | --infodir | --infodi | --infod | --info | --inf)
1.1392 ++ ac_prev=infodir ;;
1.1393 ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
1.1394 ++ infodir=$ac_optarg ;;
1.1395 ++
1.1396 ++ -libdir | --libdir | --libdi | --libd)
1.1397 ++ ac_prev=libdir ;;
1.1398 ++ -libdir=* | --libdir=* | --libdi=* | --libd=*)
1.1399 ++ libdir=$ac_optarg ;;
1.1400 ++
1.1401 ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
1.1402 ++ | --libexe | --libex | --libe)
1.1403 ++ ac_prev=libexecdir ;;
1.1404 ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
1.1405 ++ | --libexe=* | --libex=* | --libe=*)
1.1406 ++ libexecdir=$ac_optarg ;;
1.1407 ++
1.1408 ++ -localedir | --localedir | --localedi | --localed | --locale)
1.1409 ++ ac_prev=localedir ;;
1.1410 ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
1.1411 ++ localedir=$ac_optarg ;;
1.1412 ++
1.1413 ++ -localstatedir | --localstatedir | --localstatedi | --localstated \
1.1414 ++ | --localstate | --localstat | --localsta | --localst | --locals)
1.1415 ++ ac_prev=localstatedir ;;
1.1416 ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
1.1417 ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
1.1418 ++ localstatedir=$ac_optarg ;;
1.1419 ++
1.1420 ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
1.1421 ++ ac_prev=mandir ;;
1.1422 ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
1.1423 ++ mandir=$ac_optarg ;;
1.1424 ++
1.1425 ++ -nfp | --nfp | --nf)
1.1426 ++ # Obsolete; use --without-fp.
1.1427 ++ with_fp=no ;;
1.1428 ++
1.1429 ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
1.1430 ++ | --no-cr | --no-c | -n)
1.1431 ++ no_create=yes ;;
1.1432 ++
1.1433 ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
1.1434 ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
1.1435 ++ no_recursion=yes ;;
1.1436 ++
1.1437 ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
1.1438 ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
1.1439 ++ | --oldin | --oldi | --old | --ol | --o)
1.1440 ++ ac_prev=oldincludedir ;;
1.1441 ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
1.1442 ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
1.1443 ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
1.1444 ++ oldincludedir=$ac_optarg ;;
1.1445 ++
1.1446 ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
1.1447 ++ ac_prev=prefix ;;
1.1448 ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
1.1449 ++ prefix=$ac_optarg ;;
1.1450 ++
1.1451 ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \
1.1452 ++ | --program-pre | --program-pr | --program-p)
1.1453 ++ ac_prev=program_prefix ;;
1.1454 ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \
1.1455 ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
1.1456 ++ program_prefix=$ac_optarg ;;
1.1457 ++
1.1458 ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \
1.1459 ++ | --program-suf | --program-su | --program-s)
1.1460 ++ ac_prev=program_suffix ;;
1.1461 ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \
1.1462 ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
1.1463 ++ program_suffix=$ac_optarg ;;
1.1464 ++
1.1465 ++ -program-transform-name | --program-transform-name \
1.1466 ++ | --program-transform-nam | --program-transform-na \
1.1467 ++ | --program-transform-n | --program-transform- \
1.1468 ++ | --program-transform | --program-transfor \
1.1469 ++ | --program-transfo | --program-transf \
1.1470 ++ | --program-trans | --program-tran \
1.1471 ++ | --progr-tra | --program-tr | --program-t)
1.1472 ++ ac_prev=program_transform_name ;;
1.1473 ++ -program-transform-name=* | --program-transform-name=* \
1.1474 ++ | --program-transform-nam=* | --program-transform-na=* \
1.1475 ++ | --program-transform-n=* | --program-transform-=* \
1.1476 ++ | --program-transform=* | --program-transfor=* \
1.1477 ++ | --program-transfo=* | --program-transf=* \
1.1478 ++ | --program-trans=* | --program-tran=* \
1.1479 ++ | --progr-tra=* | --program-tr=* | --program-t=*)
1.1480 ++ program_transform_name=$ac_optarg ;;
1.1481 ++
1.1482 ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
1.1483 ++ ac_prev=pdfdir ;;
1.1484 ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
1.1485 ++ pdfdir=$ac_optarg ;;
1.1486 ++
1.1487 ++ -psdir | --psdir | --psdi | --psd | --ps)
1.1488 ++ ac_prev=psdir ;;
1.1489 ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
1.1490 ++ psdir=$ac_optarg ;;
1.1491 ++
1.1492 ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.1493 ++ | -silent | --silent | --silen | --sile | --sil)
1.1494 ++ silent=yes ;;
1.1495 ++
1.1496 ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
1.1497 ++ ac_prev=sbindir ;;
1.1498 ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
1.1499 ++ | --sbi=* | --sb=*)
1.1500 ++ sbindir=$ac_optarg ;;
1.1501 ++
1.1502 ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \
1.1503 ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
1.1504 ++ | --sharedst | --shareds | --shared | --share | --shar \
1.1505 ++ | --sha | --sh)
1.1506 ++ ac_prev=sharedstatedir ;;
1.1507 ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
1.1508 ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
1.1509 ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
1.1510 ++ | --sha=* | --sh=*)
1.1511 ++ sharedstatedir=$ac_optarg ;;
1.1512 ++
1.1513 ++ -site | --site | --sit)
1.1514 ++ ac_prev=site ;;
1.1515 ++ -site=* | --site=* | --sit=*)
1.1516 ++ site=$ac_optarg ;;
1.1517 ++
1.1518 ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
1.1519 ++ ac_prev=srcdir ;;
1.1520 ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
1.1521 ++ srcdir=$ac_optarg ;;
1.1522 ++
1.1523 ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
1.1524 ++ | --syscon | --sysco | --sysc | --sys | --sy)
1.1525 ++ ac_prev=sysconfdir ;;
1.1526 ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
1.1527 ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
1.1528 ++ sysconfdir=$ac_optarg ;;
1.1529 ++
1.1530 ++ -target | --target | --targe | --targ | --tar | --ta | --t)
1.1531 ++ ac_prev=target_alias ;;
1.1532 ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
1.1533 ++ target_alias=$ac_optarg ;;
1.1534 ++
1.1535 ++ -v | -verbose | --verbose | --verbos | --verbo | --verb)
1.1536 ++ verbose=yes ;;
1.1537 ++
1.1538 ++ -version | --version | --versio | --versi | --vers | -V)
1.1539 ++ ac_init_version=: ;;
1.1540 ++
1.1541 ++ -with-* | --with-*)
1.1542 ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
1.1543 ++ # Reject names that are not valid shell variable names.
1.1544 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.1545 ++ { echo "$as_me: error: invalid package name: $ac_package" >&2
1.1546 ++ { (exit 1); exit 1; }; }
1.1547 ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
1.1548 ++ eval with_$ac_package=\$ac_optarg ;;
1.1549 ++
1.1550 ++ -without-* | --without-*)
1.1551 ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
1.1552 ++ # Reject names that are not valid shell variable names.
1.1553 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.1554 ++ { echo "$as_me: error: invalid package name: $ac_package" >&2
1.1555 ++ { (exit 1); exit 1; }; }
1.1556 ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
1.1557 ++ eval with_$ac_package=no ;;
1.1558 ++
1.1559 ++ --x)
1.1560 ++ # Obsolete; use --with-x.
1.1561 ++ with_x=yes ;;
1.1562 ++
1.1563 ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
1.1564 ++ | --x-incl | --x-inc | --x-in | --x-i)
1.1565 ++ ac_prev=x_includes ;;
1.1566 ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
1.1567 ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
1.1568 ++ x_includes=$ac_optarg ;;
1.1569 ++
1.1570 ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \
1.1571 ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
1.1572 ++ ac_prev=x_libraries ;;
1.1573 ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
1.1574 ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
1.1575 ++ x_libraries=$ac_optarg ;;
1.1576 ++
1.1577 ++ -*) { echo "$as_me: error: unrecognized option: $ac_option
1.1578 ++Try \`$0 --help' for more information." >&2
1.1579 ++ { (exit 1); exit 1; }; }
1.1580 ++ ;;
1.1581 ++
1.1582 ++ *=*)
1.1583 ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
1.1584 ++ # Reject names that are not valid shell variable names.
1.1585 ++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
1.1586 ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
1.1587 ++ { (exit 1); exit 1; }; }
1.1588 ++ eval $ac_envvar=\$ac_optarg
1.1589 ++ export $ac_envvar ;;
1.1590 ++
1.1591 ++ *)
1.1592 ++ # FIXME: should be removed in autoconf 3.0.
1.1593 ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
1.1594 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.1595 ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
1.1596 ++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
1.1597 ++ ;;
1.1598 ++
1.1599 ++ esac
1.1600 ++done
1.1601 ++
1.1602 ++if test -n "$ac_prev"; then
1.1603 ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
1.1604 ++ { echo "$as_me: error: missing argument to $ac_option" >&2
1.1605 ++ { (exit 1); exit 1; }; }
1.1606 ++fi
1.1607 ++
1.1608 ++# Be sure to have absolute directory names.
1.1609 ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
1.1610 ++ datadir sysconfdir sharedstatedir localstatedir includedir \
1.1611 ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
1.1612 ++ libdir localedir mandir
1.1613 ++do
1.1614 ++ eval ac_val=\$$ac_var
1.1615 ++ case $ac_val in
1.1616 ++ [\\/$]* | ?:[\\/]* ) continue;;
1.1617 ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
1.1618 ++ esac
1.1619 ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
1.1620 ++ { (exit 1); exit 1; }; }
1.1621 ++done
1.1622 ++
1.1623 ++# There might be people who depend on the old broken behavior: `$host'
1.1624 ++# used to hold the argument of --host etc.
1.1625 ++# FIXME: To remove some day.
1.1626 ++build=$build_alias
1.1627 ++host=$host_alias
1.1628 ++target=$target_alias
1.1629 ++
1.1630 ++# FIXME: To remove some day.
1.1631 ++if test "x$host_alias" != x; then
1.1632 ++ if test "x$build_alias" = x; then
1.1633 ++ cross_compiling=maybe
1.1634 ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
1.1635 ++ If a cross compiler is detected then cross compile mode will be used." >&2
1.1636 ++ elif test "x$build_alias" != "x$host_alias"; then
1.1637 ++ cross_compiling=yes
1.1638 ++ fi
1.1639 ++fi
1.1640 ++
1.1641 ++ac_tool_prefix=
1.1642 ++test -n "$host_alias" && ac_tool_prefix=$host_alias-
1.1643 ++
1.1644 ++test "$silent" = yes && exec 6>/dev/null
1.1645 ++
1.1646 ++
1.1647 ++ac_pwd=`pwd` && test -n "$ac_pwd" &&
1.1648 ++ac_ls_di=`ls -di .` &&
1.1649 ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
1.1650 ++ { echo "$as_me: error: Working directory cannot be determined" >&2
1.1651 ++ { (exit 1); exit 1; }; }
1.1652 ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
1.1653 ++ { echo "$as_me: error: pwd does not report name of working directory" >&2
1.1654 ++ { (exit 1); exit 1; }; }
1.1655 ++
1.1656 ++
1.1657 ++# Find the source files, if location was not specified.
1.1658 ++if test -z "$srcdir"; then
1.1659 ++ ac_srcdir_defaulted=yes
1.1660 ++ # Try the directory containing this script, then the parent directory.
1.1661 ++ ac_confdir=`$as_dirname -- "$0" ||
1.1662 ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.1663 ++ X"$0" : 'X\(//\)[^/]' \| \
1.1664 ++ X"$0" : 'X\(//\)$' \| \
1.1665 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.1666 ++echo X"$0" |
1.1667 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.1668 ++ s//\1/
1.1669 ++ q
1.1670 ++ }
1.1671 ++ /^X\(\/\/\)[^/].*/{
1.1672 ++ s//\1/
1.1673 ++ q
1.1674 ++ }
1.1675 ++ /^X\(\/\/\)$/{
1.1676 ++ s//\1/
1.1677 ++ q
1.1678 ++ }
1.1679 ++ /^X\(\/\).*/{
1.1680 ++ s//\1/
1.1681 ++ q
1.1682 ++ }
1.1683 ++ s/.*/./; q'`
1.1684 ++ srcdir=$ac_confdir
1.1685 ++ if test ! -r "$srcdir/$ac_unique_file"; then
1.1686 ++ srcdir=..
1.1687 ++ fi
1.1688 ++else
1.1689 ++ ac_srcdir_defaulted=no
1.1690 ++fi
1.1691 ++if test ! -r "$srcdir/$ac_unique_file"; then
1.1692 ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
1.1693 ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
1.1694 ++ { (exit 1); exit 1; }; }
1.1695 ++fi
1.1696 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
1.1697 ++ac_abs_confdir=`(
1.1698 ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
1.1699 ++ { (exit 1); exit 1; }; }
1.1700 ++ pwd)`
1.1701 ++# When building in place, set srcdir=.
1.1702 ++if test "$ac_abs_confdir" = "$ac_pwd"; then
1.1703 ++ srcdir=.
1.1704 ++fi
1.1705 ++# Remove unnecessary trailing slashes from srcdir.
1.1706 ++# Double slashes in file names in object file debugging info
1.1707 ++# mess up M-x gdb in Emacs.
1.1708 ++case $srcdir in
1.1709 ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
1.1710 ++esac
1.1711 ++for ac_var in $ac_precious_vars; do
1.1712 ++ eval ac_env_${ac_var}_set=\${${ac_var}+set}
1.1713 ++ eval ac_env_${ac_var}_value=\$${ac_var}
1.1714 ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
1.1715 ++ eval ac_cv_env_${ac_var}_value=\$${ac_var}
1.1716 ++done
1.1717 ++
1.1718 ++#
1.1719 ++# Report the --help message.
1.1720 ++#
1.1721 ++if test "$ac_init_help" = "long"; then
1.1722 ++ # Omit some internal or obsolete options to make the list less imposing.
1.1723 ++ # This message is too long to be a string in the A/UX 3.1 sh.
1.1724 ++ cat <<_ACEOF
1.1725 ++\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems.
1.1726 ++
1.1727 ++Usage: $0 [OPTION]... [VAR=VALUE]...
1.1728 ++
1.1729 ++To assign environment variables (e.g., CC, CFLAGS...), specify them as
1.1730 ++VAR=VALUE. See below for descriptions of some of the useful variables.
1.1731 ++
1.1732 ++Defaults for the options are specified in brackets.
1.1733 ++
1.1734 ++Configuration:
1.1735 ++ -h, --help display this help and exit
1.1736 ++ --help=short display options specific to this package
1.1737 ++ --help=recursive display the short help of all the included packages
1.1738 ++ -V, --version display version information and exit
1.1739 ++ -q, --quiet, --silent do not print \`checking...' messages
1.1740 ++ --cache-file=FILE cache test results in FILE [disabled]
1.1741 ++ -C, --config-cache alias for \`--cache-file=config.cache'
1.1742 ++ -n, --no-create do not create output files
1.1743 ++ --srcdir=DIR find the sources in DIR [configure dir or \`..']
1.1744 ++
1.1745 ++Installation directories:
1.1746 ++ --prefix=PREFIX install architecture-independent files in PREFIX
1.1747 ++ [$ac_default_prefix]
1.1748 ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
1.1749 ++ [PREFIX]
1.1750 ++
1.1751 ++By default, \`make install' will install all the files in
1.1752 ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
1.1753 ++an installation prefix other than \`$ac_default_prefix' using \`--prefix',
1.1754 ++for instance \`--prefix=\$HOME'.
1.1755 ++
1.1756 ++For better control, use the options below.
1.1757 ++
1.1758 ++Fine tuning of the installation directories:
1.1759 ++ --bindir=DIR user executables [EPREFIX/bin]
1.1760 ++ --sbindir=DIR system admin executables [EPREFIX/sbin]
1.1761 ++ --libexecdir=DIR program executables [EPREFIX/libexec]
1.1762 ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
1.1763 ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
1.1764 ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
1.1765 ++ --libdir=DIR object code libraries [EPREFIX/lib]
1.1766 ++ --includedir=DIR C header files [PREFIX/include]
1.1767 ++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
1.1768 ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
1.1769 ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
1.1770 ++ --infodir=DIR info documentation [DATAROOTDIR/info]
1.1771 ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
1.1772 ++ --mandir=DIR man documentation [DATAROOTDIR/man]
1.1773 ++ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib]
1.1774 ++ --htmldir=DIR html documentation [DOCDIR]
1.1775 ++ --dvidir=DIR dvi documentation [DOCDIR]
1.1776 ++ --pdfdir=DIR pdf documentation [DOCDIR]
1.1777 ++ --psdir=DIR ps documentation [DOCDIR]
1.1778 ++_ACEOF
1.1779 ++
1.1780 ++ cat <<\_ACEOF
1.1781 ++
1.1782 ++Program names:
1.1783 ++ --program-prefix=PREFIX prepend PREFIX to installed program names
1.1784 ++ --program-suffix=SUFFIX append SUFFIX to installed program names
1.1785 ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
1.1786 ++
1.1787 ++System types:
1.1788 ++ --build=BUILD configure for building on BUILD [guessed]
1.1789 ++ --host=HOST cross-compile to build programs to run on HOST [BUILD]
1.1790 ++ --target=TARGET configure for building compilers for TARGET [HOST]
1.1791 ++_ACEOF
1.1792 ++fi
1.1793 ++
1.1794 ++if test -n "$ac_init_help"; then
1.1795 ++ case $ac_init_help in
1.1796 ++ short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";;
1.1797 ++ esac
1.1798 ++ cat <<\_ACEOF
1.1799 ++
1.1800 ++Optional Features:
1.1801 ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
1.1802 ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
1.1803 ++ --enable-multilib build many library versions (default)
1.1804 ++ --enable-target-optspace optimize for space
1.1805 ++ --enable-malloc-debugging indicate malloc debugging requested
1.1806 ++ --enable-newlib-mb enable multibyte support
1.1807 ++ --enable-newlib-iconv enable iconv library support
1.1808 ++ --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in
1.1809 ++ --enable-newlib-multithread enable support for multiple threads
1.1810 ++ --enable-newlib-elix-level supply desired elix library level (1-4)
1.1811 ++ --disable-newlib-io-float disable printf/scanf family float support
1.1812 ++ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls
1.1813 ++ --enable-maintainer-mode enable make rules and dependencies not useful
1.1814 ++ (and sometimes confusing) to the casual installer
1.1815 ++
1.1816 ++_ACEOF
1.1817 ++ac_status=$?
1.1818 ++fi
1.1819 ++
1.1820 ++if test "$ac_init_help" = "recursive"; then
1.1821 ++ # If there are subdirs, report their specific --help.
1.1822 ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
1.1823 ++ test -d "$ac_dir" || continue
1.1824 ++ ac_builddir=.
1.1825 ++
1.1826 ++case "$ac_dir" in
1.1827 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.1828 ++*)
1.1829 ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.1830 ++ # A ".." for each directory in $ac_dir_suffix.
1.1831 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.1832 ++ case $ac_top_builddir_sub in
1.1833 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.1834 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.1835 ++ esac ;;
1.1836 ++esac
1.1837 ++ac_abs_top_builddir=$ac_pwd
1.1838 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.1839 ++# for backward compatibility:
1.1840 ++ac_top_builddir=$ac_top_build_prefix
1.1841 ++
1.1842 ++case $srcdir in
1.1843 ++ .) # We are building in place.
1.1844 ++ ac_srcdir=.
1.1845 ++ ac_top_srcdir=$ac_top_builddir_sub
1.1846 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.1847 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.1848 ++ ac_srcdir=$srcdir$ac_dir_suffix;
1.1849 ++ ac_top_srcdir=$srcdir
1.1850 ++ ac_abs_top_srcdir=$srcdir ;;
1.1851 ++ *) # Relative name.
1.1852 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.1853 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.1854 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.1855 ++esac
1.1856 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.1857 ++
1.1858 ++ cd "$ac_dir" || { ac_status=$?; continue; }
1.1859 ++ # Check for guested configure.
1.1860 ++ if test -f "$ac_srcdir/configure.gnu"; then
1.1861 ++ echo &&
1.1862 ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
1.1863 ++ elif test -f "$ac_srcdir/configure"; then
1.1864 ++ echo &&
1.1865 ++ $SHELL "$ac_srcdir/configure" --help=recursive
1.1866 ++ else
1.1867 ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
1.1868 ++ fi || ac_status=$?
1.1869 ++ cd "$ac_pwd" || { ac_status=$?; break; }
1.1870 ++ done
1.1871 ++fi
1.1872 ++
1.1873 ++test -n "$ac_init_help" && exit $ac_status
1.1874 ++if $ac_init_version; then
1.1875 ++ cat <<\_ACEOF
1.1876 ++newlib configure NEWLIB_VERSION
1.1877 ++generated by GNU Autoconf 2.61
1.1878 ++
1.1879 ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
1.1880 ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.1881 ++This configure script is free software; the Free Software Foundation
1.1882 ++gives unlimited permission to copy, distribute and modify it.
1.1883 ++_ACEOF
1.1884 ++ exit
1.1885 ++fi
1.1886 ++cat >config.log <<_ACEOF
1.1887 ++This file contains any messages produced by compilers while
1.1888 ++running configure, to aid debugging if configure makes a mistake.
1.1889 ++
1.1890 ++It was created by newlib $as_me NEWLIB_VERSION, which was
1.1891 ++generated by GNU Autoconf 2.61. Invocation command line was
1.1892 ++
1.1893 ++ $ $0 $@
1.1894 ++
1.1895 ++_ACEOF
1.1896 ++exec 5>>config.log
1.1897 ++{
1.1898 ++cat <<_ASUNAME
1.1899 ++## --------- ##
1.1900 ++## Platform. ##
1.1901 ++## --------- ##
1.1902 ++
1.1903 ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
1.1904 ++uname -m = `(uname -m) 2>/dev/null || echo unknown`
1.1905 ++uname -r = `(uname -r) 2>/dev/null || echo unknown`
1.1906 ++uname -s = `(uname -s) 2>/dev/null || echo unknown`
1.1907 ++uname -v = `(uname -v) 2>/dev/null || echo unknown`
1.1908 ++
1.1909 ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
1.1910 ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
1.1911 ++
1.1912 ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
1.1913 ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
1.1914 ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
1.1915 ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
1.1916 ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
1.1917 ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
1.1918 ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
1.1919 ++
1.1920 ++_ASUNAME
1.1921 ++
1.1922 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.1923 ++for as_dir in $PATH
1.1924 ++do
1.1925 ++ IFS=$as_save_IFS
1.1926 ++ test -z "$as_dir" && as_dir=.
1.1927 ++ echo "PATH: $as_dir"
1.1928 ++done
1.1929 ++IFS=$as_save_IFS
1.1930 ++
1.1931 ++} >&5
1.1932 ++
1.1933 ++cat >&5 <<_ACEOF
1.1934 ++
1.1935 ++
1.1936 ++## ----------- ##
1.1937 ++## Core tests. ##
1.1938 ++## ----------- ##
1.1939 ++
1.1940 ++_ACEOF
1.1941 ++
1.1942 ++
1.1943 ++# Keep a trace of the command line.
1.1944 ++# Strip out --no-create and --no-recursion so they do not pile up.
1.1945 ++# Strip out --silent because we don't want to record it for future runs.
1.1946 ++# Also quote any args containing shell meta-characters.
1.1947 ++# Make two passes to allow for proper duplicate-argument suppression.
1.1948 ++ac_configure_args=
1.1949 ++ac_configure_args0=
1.1950 ++ac_configure_args1=
1.1951 ++ac_must_keep_next=false
1.1952 ++for ac_pass in 1 2
1.1953 ++do
1.1954 ++ for ac_arg
1.1955 ++ do
1.1956 ++ case $ac_arg in
1.1957 ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
1.1958 ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.1959 ++ | -silent | --silent | --silen | --sile | --sil)
1.1960 ++ continue ;;
1.1961 ++ *\'*)
1.1962 ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
1.1963 ++ esac
1.1964 ++ case $ac_pass in
1.1965 ++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
1.1966 ++ 2)
1.1967 ++ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
1.1968 ++ if test $ac_must_keep_next = true; then
1.1969 ++ ac_must_keep_next=false # Got value, back to normal.
1.1970 ++ else
1.1971 ++ case $ac_arg in
1.1972 ++ *=* | --config-cache | -C | -disable-* | --disable-* \
1.1973 ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
1.1974 ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
1.1975 ++ | -with-* | --with-* | -without-* | --without-* | --x)
1.1976 ++ case "$ac_configure_args0 " in
1.1977 ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
1.1978 ++ esac
1.1979 ++ ;;
1.1980 ++ -* ) ac_must_keep_next=true ;;
1.1981 ++ esac
1.1982 ++ fi
1.1983 ++ ac_configure_args="$ac_configure_args '$ac_arg'"
1.1984 ++ ;;
1.1985 ++ esac
1.1986 ++ done
1.1987 ++done
1.1988 ++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
1.1989 ++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
1.1990 ++
1.1991 ++# When interrupted or exit'd, cleanup temporary files, and complete
1.1992 ++# config.log. We remove comments because anyway the quotes in there
1.1993 ++# would cause problems or look ugly.
1.1994 ++# WARNING: Use '\'' to represent an apostrophe within the trap.
1.1995 ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
1.1996 ++trap 'exit_status=$?
1.1997 ++ # Save into config.log some information that might help in debugging.
1.1998 ++ {
1.1999 ++ echo
1.2000 ++
1.2001 ++ cat <<\_ASBOX
1.2002 ++## ---------------- ##
1.2003 ++## Cache variables. ##
1.2004 ++## ---------------- ##
1.2005 ++_ASBOX
1.2006 ++ echo
1.2007 ++ # The following way of writing the cache mishandles newlines in values,
1.2008 ++(
1.2009 ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
1.2010 ++ eval ac_val=\$$ac_var
1.2011 ++ case $ac_val in #(
1.2012 ++ *${as_nl}*)
1.2013 ++ case $ac_var in #(
1.2014 ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
1.2015 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
1.2016 ++ esac
1.2017 ++ case $ac_var in #(
1.2018 ++ _ | IFS | as_nl) ;; #(
1.2019 ++ *) $as_unset $ac_var ;;
1.2020 ++ esac ;;
1.2021 ++ esac
1.2022 ++ done
1.2023 ++ (set) 2>&1 |
1.2024 ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
1.2025 ++ *${as_nl}ac_space=\ *)
1.2026 ++ sed -n \
1.2027 ++ "s/'\''/'\''\\\\'\'''\''/g;
1.2028 ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
1.2029 ++ ;; #(
1.2030 ++ *)
1.2031 ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
1.2032 ++ ;;
1.2033 ++ esac |
1.2034 ++ sort
1.2035 ++)
1.2036 ++ echo
1.2037 ++
1.2038 ++ cat <<\_ASBOX
1.2039 ++## ----------------- ##
1.2040 ++## Output variables. ##
1.2041 ++## ----------------- ##
1.2042 ++_ASBOX
1.2043 ++ echo
1.2044 ++ for ac_var in $ac_subst_vars
1.2045 ++ do
1.2046 ++ eval ac_val=\$$ac_var
1.2047 ++ case $ac_val in
1.2048 ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
1.2049 ++ esac
1.2050 ++ echo "$ac_var='\''$ac_val'\''"
1.2051 ++ done | sort
1.2052 ++ echo
1.2053 ++
1.2054 ++ if test -n "$ac_subst_files"; then
1.2055 ++ cat <<\_ASBOX
1.2056 ++## ------------------- ##
1.2057 ++## File substitutions. ##
1.2058 ++## ------------------- ##
1.2059 ++_ASBOX
1.2060 ++ echo
1.2061 ++ for ac_var in $ac_subst_files
1.2062 ++ do
1.2063 ++ eval ac_val=\$$ac_var
1.2064 ++ case $ac_val in
1.2065 ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
1.2066 ++ esac
1.2067 ++ echo "$ac_var='\''$ac_val'\''"
1.2068 ++ done | sort
1.2069 ++ echo
1.2070 ++ fi
1.2071 ++
1.2072 ++ if test -s confdefs.h; then
1.2073 ++ cat <<\_ASBOX
1.2074 ++## ----------- ##
1.2075 ++## confdefs.h. ##
1.2076 ++## ----------- ##
1.2077 ++_ASBOX
1.2078 ++ echo
1.2079 ++ cat confdefs.h
1.2080 ++ echo
1.2081 ++ fi
1.2082 ++ test "$ac_signal" != 0 &&
1.2083 ++ echo "$as_me: caught signal $ac_signal"
1.2084 ++ echo "$as_me: exit $exit_status"
1.2085 ++ } >&5
1.2086 ++ rm -f core *.core core.conftest.* &&
1.2087 ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
1.2088 ++ exit $exit_status
1.2089 ++' 0
1.2090 ++for ac_signal in 1 2 13 15; do
1.2091 ++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
1.2092 ++done
1.2093 ++ac_signal=0
1.2094 ++
1.2095 ++# confdefs.h avoids OS command line length limits that DEFS can exceed.
1.2096 ++rm -f -r conftest* confdefs.h
1.2097 ++
1.2098 ++# Predefined preprocessor variables.
1.2099 ++
1.2100 ++cat >>confdefs.h <<_ACEOF
1.2101 ++#define PACKAGE_NAME "$PACKAGE_NAME"
1.2102 ++_ACEOF
1.2103 ++
1.2104 ++
1.2105 ++cat >>confdefs.h <<_ACEOF
1.2106 ++#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
1.2107 ++_ACEOF
1.2108 ++
1.2109 ++
1.2110 ++cat >>confdefs.h <<_ACEOF
1.2111 ++#define PACKAGE_VERSION "$PACKAGE_VERSION"
1.2112 ++_ACEOF
1.2113 ++
1.2114 ++
1.2115 ++cat >>confdefs.h <<_ACEOF
1.2116 ++#define PACKAGE_STRING "$PACKAGE_STRING"
1.2117 ++_ACEOF
1.2118 ++
1.2119 ++
1.2120 ++cat >>confdefs.h <<_ACEOF
1.2121 ++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
1.2122 ++_ACEOF
1.2123 ++
1.2124 ++
1.2125 ++# Let the site file select an alternate cache file if it wants to.
1.2126 ++# Prefer explicitly selected file to automatically selected ones.
1.2127 ++if test -n "$CONFIG_SITE"; then
1.2128 ++ set x "$CONFIG_SITE"
1.2129 ++elif test "x$prefix" != xNONE; then
1.2130 ++ set x "$prefix/share/config.site" "$prefix/etc/config.site"
1.2131 ++else
1.2132 ++ set x "$ac_default_prefix/share/config.site" \
1.2133 ++ "$ac_default_prefix/etc/config.site"
1.2134 ++fi
1.2135 ++shift
1.2136 ++for ac_site_file
1.2137 ++do
1.2138 ++ if test -r "$ac_site_file"; then
1.2139 ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
1.2140 ++echo "$as_me: loading site script $ac_site_file" >&6;}
1.2141 ++ sed 's/^/| /' "$ac_site_file" >&5
1.2142 ++ . "$ac_site_file"
1.2143 ++ fi
1.2144 ++done
1.2145 ++
1.2146 ++if test -r "$cache_file"; then
1.2147 ++ # Some versions of bash will fail to source /dev/null (special
1.2148 ++ # files actually), so we avoid doing that.
1.2149 ++ if test -f "$cache_file"; then
1.2150 ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
1.2151 ++echo "$as_me: loading cache $cache_file" >&6;}
1.2152 ++ case $cache_file in
1.2153 ++ [\\/]* | ?:[\\/]* ) . "$cache_file";;
1.2154 ++ *) . "./$cache_file";;
1.2155 ++ esac
1.2156 ++ fi
1.2157 ++else
1.2158 ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
1.2159 ++echo "$as_me: creating cache $cache_file" >&6;}
1.2160 ++ >$cache_file
1.2161 ++fi
1.2162 ++
1.2163 ++# Check that the precious variables saved in the cache have kept the same
1.2164 ++# value.
1.2165 ++ac_cache_corrupted=false
1.2166 ++for ac_var in $ac_precious_vars; do
1.2167 ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
1.2168 ++ eval ac_new_set=\$ac_env_${ac_var}_set
1.2169 ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value
1.2170 ++ eval ac_new_val=\$ac_env_${ac_var}_value
1.2171 ++ case $ac_old_set,$ac_new_set in
1.2172 ++ set,)
1.2173 ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
1.2174 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
1.2175 ++ ac_cache_corrupted=: ;;
1.2176 ++ ,set)
1.2177 ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
1.2178 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
1.2179 ++ ac_cache_corrupted=: ;;
1.2180 ++ ,);;
1.2181 ++ *)
1.2182 ++ if test "x$ac_old_val" != "x$ac_new_val"; then
1.2183 ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
1.2184 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
1.2185 ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
1.2186 ++echo "$as_me: former value: $ac_old_val" >&2;}
1.2187 ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
1.2188 ++echo "$as_me: current value: $ac_new_val" >&2;}
1.2189 ++ ac_cache_corrupted=:
1.2190 ++ fi;;
1.2191 ++ esac
1.2192 ++ # Pass precious variables to config.status.
1.2193 ++ if test "$ac_new_set" = set; then
1.2194 ++ case $ac_new_val in
1.2195 ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1.2196 ++ *) ac_arg=$ac_var=$ac_new_val ;;
1.2197 ++ esac
1.2198 ++ case " $ac_configure_args " in
1.2199 ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
1.2200 ++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
1.2201 ++ esac
1.2202 ++ fi
1.2203 ++done
1.2204 ++if $ac_cache_corrupted; then
1.2205 ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
1.2206 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;}
1.2207 ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
1.2208 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
1.2209 ++ { (exit 1); exit 1; }; }
1.2210 ++fi
1.2211 ++
1.2212 ++
1.2213 ++
1.2214 ++
1.2215 ++
1.2216 ++
1.2217 ++
1.2218 ++
1.2219 ++
1.2220 ++
1.2221 ++
1.2222 ++
1.2223 ++
1.2224 ++
1.2225 ++
1.2226 ++
1.2227 ++
1.2228 ++
1.2229 ++
1.2230 ++
1.2231 ++
1.2232 ++
1.2233 ++
1.2234 ++
1.2235 ++
1.2236 ++ac_ext=c
1.2237 ++ac_cpp='$CPP $CPPFLAGS'
1.2238 ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.2239 ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1.2240 ++ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.2241 ++
1.2242 ++
1.2243 ++
1.2244 ++
1.2245 ++ac_aux_dir=
1.2246 ++for ac_dir in ../../../.. "$srcdir"/../../../..; do
1.2247 ++ if test -f "$ac_dir/install-sh"; then
1.2248 ++ ac_aux_dir=$ac_dir
1.2249 ++ ac_install_sh="$ac_aux_dir/install-sh -c"
1.2250 ++ break
1.2251 ++ elif test -f "$ac_dir/install.sh"; then
1.2252 ++ ac_aux_dir=$ac_dir
1.2253 ++ ac_install_sh="$ac_aux_dir/install.sh -c"
1.2254 ++ break
1.2255 ++ elif test -f "$ac_dir/shtool"; then
1.2256 ++ ac_aux_dir=$ac_dir
1.2257 ++ ac_install_sh="$ac_aux_dir/shtool install -c"
1.2258 ++ break
1.2259 ++ fi
1.2260 ++done
1.2261 ++if test -z "$ac_aux_dir"; then
1.2262 ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5
1.2263 ++echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;}
1.2264 ++ { (exit 1); exit 1; }; }
1.2265 ++fi
1.2266 ++
1.2267 ++# These three variables are undocumented and unsupported,
1.2268 ++# and are intended to be withdrawn in a future Autoconf release.
1.2269 ++# They can cause serious problems if a builder's source tree is in a directory
1.2270 ++# whose full name contains unusual characters.
1.2271 ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
1.2272 ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
1.2273 ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
1.2274 ++
1.2275 ++
1.2276 ++
1.2277 ++# Make sure we can run config.sub.
1.2278 ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
1.2279 ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
1.2280 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
1.2281 ++ { (exit 1); exit 1; }; }
1.2282 ++
1.2283 ++{ echo "$as_me:$LINENO: checking build system type" >&5
1.2284 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
1.2285 ++if test "${ac_cv_build+set}" = set; then
1.2286 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.2287 ++else
1.2288 ++ ac_build_alias=$build_alias
1.2289 ++test "x$ac_build_alias" = x &&
1.2290 ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
1.2291 ++test "x$ac_build_alias" = x &&
1.2292 ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
1.2293 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
1.2294 ++ { (exit 1); exit 1; }; }
1.2295 ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
1.2296 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
1.2297 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
1.2298 ++ { (exit 1); exit 1; }; }
1.2299 ++
1.2300 ++fi
1.2301 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1.2302 ++echo "${ECHO_T}$ac_cv_build" >&6; }
1.2303 ++case $ac_cv_build in
1.2304 ++*-*-*) ;;
1.2305 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
1.2306 ++echo "$as_me: error: invalid value of canonical build" >&2;}
1.2307 ++ { (exit 1); exit 1; }; };;
1.2308 ++esac
1.2309 ++build=$ac_cv_build
1.2310 ++ac_save_IFS=$IFS; IFS='-'
1.2311 ++set x $ac_cv_build
1.2312 ++shift
1.2313 ++build_cpu=$1
1.2314 ++build_vendor=$2
1.2315 ++shift; shift
1.2316 ++# Remember, the first character of IFS is used to create $*,
1.2317 ++# except with old shells:
1.2318 ++build_os=$*
1.2319 ++IFS=$ac_save_IFS
1.2320 ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
1.2321 ++
1.2322 ++
1.2323 ++{ echo "$as_me:$LINENO: checking host system type" >&5
1.2324 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
1.2325 ++if test "${ac_cv_host+set}" = set; then
1.2326 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.2327 ++else
1.2328 ++ if test "x$host_alias" = x; then
1.2329 ++ ac_cv_host=$ac_cv_build
1.2330 ++else
1.2331 ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
1.2332 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
1.2333 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
1.2334 ++ { (exit 1); exit 1; }; }
1.2335 ++fi
1.2336 ++
1.2337 ++fi
1.2338 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1.2339 ++echo "${ECHO_T}$ac_cv_host" >&6; }
1.2340 ++case $ac_cv_host in
1.2341 ++*-*-*) ;;
1.2342 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
1.2343 ++echo "$as_me: error: invalid value of canonical host" >&2;}
1.2344 ++ { (exit 1); exit 1; }; };;
1.2345 ++esac
1.2346 ++host=$ac_cv_host
1.2347 ++ac_save_IFS=$IFS; IFS='-'
1.2348 ++set x $ac_cv_host
1.2349 ++shift
1.2350 ++host_cpu=$1
1.2351 ++host_vendor=$2
1.2352 ++shift; shift
1.2353 ++# Remember, the first character of IFS is used to create $*,
1.2354 ++# except with old shells:
1.2355 ++host_os=$*
1.2356 ++IFS=$ac_save_IFS
1.2357 ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
1.2358 ++
1.2359 ++
1.2360 ++am__api_version="1.4"
1.2361 ++# Find a good install program. We prefer a C program (faster),
1.2362 ++# so one script is as good as another. But avoid the broken or
1.2363 ++# incompatible versions:
1.2364 ++# SysV /etc/install, /usr/sbin/install
1.2365 ++# SunOS /usr/etc/install
1.2366 ++# IRIX /sbin/install
1.2367 ++# AIX /bin/install
1.2368 ++# AmigaOS /C/install, which installs bootblocks on floppy discs
1.2369 ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
1.2370 ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
1.2371 ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1.2372 ++# OS/2's system install, which has a completely different semantic
1.2373 ++# ./install, which can be erroneously created by make from ./install.sh.
1.2374 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.2375 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
1.2376 ++if test -z "$INSTALL"; then
1.2377 ++if test "${ac_cv_path_install+set}" = set; then
1.2378 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.2379 ++else
1.2380 ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.2381 ++for as_dir in $PATH
1.2382 ++do
1.2383 ++ IFS=$as_save_IFS
1.2384 ++ test -z "$as_dir" && as_dir=.
1.2385 ++ # Account for people who put trailing slashes in PATH elements.
1.2386 ++case $as_dir/ in
1.2387 ++ ./ | .// | /cC/* | \
1.2388 ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
1.2389 ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
1.2390 ++ /usr/ucb/* ) ;;
1.2391 ++ *)
1.2392 ++ # OSF1 and SCO ODT 3.0 have their own names for install.
1.2393 ++ # Don't use installbsd from OSF since it installs stuff as root
1.2394 ++ # by default.
1.2395 ++ for ac_prog in ginstall scoinst install; do
1.2396 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.2397 ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
1.2398 ++ if test $ac_prog = install &&
1.2399 ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.2400 ++ # AIX install. It has an incompatible calling convention.
1.2401 ++ :
1.2402 ++ elif test $ac_prog = install &&
1.2403 ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.2404 ++ # program-specific install script used by HP pwplus--don't use.
1.2405 ++ :
1.2406 ++ else
1.2407 ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
1.2408 ++ break 3
1.2409 ++ fi
1.2410 ++ fi
1.2411 ++ done
1.2412 ++ done
1.2413 ++ ;;
1.2414 ++esac
1.2415 ++done
1.2416 ++IFS=$as_save_IFS
1.2417 ++
1.2418 ++
1.2419 ++fi
1.2420 ++ if test "${ac_cv_path_install+set}" = set; then
1.2421 ++ INSTALL=$ac_cv_path_install
1.2422 ++ else
1.2423 ++ # As a last resort, use the slow shell script. Don't cache a
1.2424 ++ # value for INSTALL within a source directory, because that will
1.2425 ++ # break other packages using the cache if that directory is
1.2426 ++ # removed, or if the value is a relative name.
1.2427 ++ INSTALL=$ac_install_sh
1.2428 ++ fi
1.2429 ++fi
1.2430 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
1.2431 ++echo "${ECHO_T}$INSTALL" >&6; }
1.2432 ++
1.2433 ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1.2434 ++# It thinks the first close brace ends the variable substitution.
1.2435 ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
1.2436 ++
1.2437 ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
1.2438 ++
1.2439 ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1.2440 ++
1.2441 ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
1.2442 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
1.2443 ++# Just in case
1.2444 ++sleep 1
1.2445 ++echo timestamp > conftestfile
1.2446 ++# Do `set' in a subshell so we don't clobber the current shell's
1.2447 ++# arguments. Must try -L first in case configure is actually a
1.2448 ++# symlink; some systems play weird games with the mod time of symlinks
1.2449 ++# (eg FreeBSD returns the mod time of the symlink's containing
1.2450 ++# directory).
1.2451 ++if (
1.2452 ++ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
1.2453 ++ if test "$*" = "X"; then
1.2454 ++ # -L didn't work.
1.2455 ++ set X `ls -t $srcdir/configure conftestfile`
1.2456 ++ fi
1.2457 ++ if test "$*" != "X $srcdir/configure conftestfile" \
1.2458 ++ && test "$*" != "X conftestfile $srcdir/configure"; then
1.2459 ++
1.2460 ++ # If neither matched, then we have a broken ls. This can happen
1.2461 ++ # if, for instance, CONFIG_SHELL is bash and it inherits a
1.2462 ++ # broken ls alias from the environment. This has actually
1.2463 ++ # happened. Such a system could not be considered "sane".
1.2464 ++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
1.2465 ++alias in your environment" >&5
1.2466 ++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
1.2467 ++alias in your environment" >&2;}
1.2468 ++ { (exit 1); exit 1; }; }
1.2469 ++ fi
1.2470 ++
1.2471 ++ test "$2" = conftestfile
1.2472 ++ )
1.2473 ++then
1.2474 ++ # Ok.
1.2475 ++ :
1.2476 ++else
1.2477 ++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
1.2478 ++Check your system clock" >&5
1.2479 ++echo "$as_me: error: newly created file is older than distributed files!
1.2480 ++Check your system clock" >&2;}
1.2481 ++ { (exit 1); exit 1; }; }
1.2482 ++fi
1.2483 ++rm -f conftest*
1.2484 ++{ echo "$as_me:$LINENO: result: yes" >&5
1.2485 ++echo "${ECHO_T}yes" >&6; }
1.2486 ++test "$program_prefix" != NONE &&
1.2487 ++ program_transform_name="s&^&$program_prefix&;$program_transform_name"
1.2488 ++# Use a double $ so make ignores it.
1.2489 ++test "$program_suffix" != NONE &&
1.2490 ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
1.2491 ++# Double any \ or $. echo might interpret backslashes.
1.2492 ++# By default was `s,x,x', remove it if useless.
1.2493 ++cat <<\_ACEOF >conftest.sed
1.2494 ++s/[\\$]/&&/g;s/;s,x,x,$//
1.2495 ++_ACEOF
1.2496 ++program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
1.2497 ++rm -f conftest.sed
1.2498 ++
1.2499 ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
1.2500 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
1.2501 ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
1.2502 ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
1.2503 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.2504 ++else
1.2505 ++ cat >conftest.make <<\_ACEOF
1.2506 ++SHELL = /bin/sh
1.2507 ++all:
1.2508 ++ @echo '@@@%%%=$(MAKE)=@@@%%%'
1.2509 ++_ACEOF
1.2510 ++# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
1.2511 ++case `${MAKE-make} -f conftest.make 2>/dev/null` in
1.2512 ++ *@@@%%%=?*=@@@%%%*)
1.2513 ++ eval ac_cv_prog_make_${ac_make}_set=yes;;
1.2514 ++ *)
1.2515 ++ eval ac_cv_prog_make_${ac_make}_set=no;;
1.2516 ++esac
1.2517 ++rm -f conftest.make
1.2518 ++fi
1.2519 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
1.2520 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.2521 ++echo "${ECHO_T}yes" >&6; }
1.2522 ++ SET_MAKE=
1.2523 ++else
1.2524 ++ { echo "$as_me:$LINENO: result: no" >&5
1.2525 ++echo "${ECHO_T}no" >&6; }
1.2526 ++ SET_MAKE="MAKE=${MAKE-make}"
1.2527 ++fi
1.2528 ++
1.2529 ++
1.2530 ++# Check whether --enable-multilib was given.
1.2531 ++if test "${enable_multilib+set}" = set; then
1.2532 ++ enableval=$enable_multilib; case "${enableval}" in
1.2533 ++ yes) multilib=yes ;;
1.2534 ++ no) multilib=no ;;
1.2535 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
1.2536 ++echo "$as_me: error: bad value ${enableval} for multilib option" >&2;}
1.2537 ++ { (exit 1); exit 1; }; } ;;
1.2538 ++ esac
1.2539 ++else
1.2540 ++ multilib=yes
1.2541 ++fi
1.2542 ++
1.2543 ++# Check whether --enable-target-optspace was given.
1.2544 ++if test "${enable_target_optspace+set}" = set; then
1.2545 ++ enableval=$enable_target_optspace; case "${enableval}" in
1.2546 ++ yes) target_optspace=yes ;;
1.2547 ++ no) target_optspace=no ;;
1.2548 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
1.2549 ++echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;}
1.2550 ++ { (exit 1); exit 1; }; } ;;
1.2551 ++ esac
1.2552 ++else
1.2553 ++ target_optspace=
1.2554 ++fi
1.2555 ++
1.2556 ++# Check whether --enable-malloc-debugging was given.
1.2557 ++if test "${enable_malloc_debugging+set}" = set; then
1.2558 ++ enableval=$enable_malloc_debugging; case "${enableval}" in
1.2559 ++ yes) malloc_debugging=yes ;;
1.2560 ++ no) malloc_debugging=no ;;
1.2561 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
1.2562 ++echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;}
1.2563 ++ { (exit 1); exit 1; }; } ;;
1.2564 ++ esac
1.2565 ++else
1.2566 ++ malloc_debugging=
1.2567 ++fi
1.2568 ++
1.2569 ++# Check whether --enable-newlib-mb was given.
1.2570 ++if test "${enable_newlib_mb+set}" = set; then
1.2571 ++ enableval=$enable_newlib_mb; case "${enableval}" in
1.2572 ++ yes) newlib_mb=yes ;;
1.2573 ++ no) newlib_mb=no ;;
1.2574 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-mb option" >&5
1.2575 ++echo "$as_me: error: bad value ${enableval} for newlib-mb option" >&2;}
1.2576 ++ { (exit 1); exit 1; }; } ;;
1.2577 ++ esac
1.2578 ++else
1.2579 ++ newlib_mb=
1.2580 ++fi
1.2581 ++
1.2582 ++# Check whether --enable-newlib-iconv was given.
1.2583 ++if test "${enable_newlib_iconv+set}" = set; then
1.2584 ++ enableval=$enable_newlib_iconv; case "${enableval}" in
1.2585 ++ yes) newlib_iconv=yes ;;
1.2586 ++ no) newlib_iconv=no ;;
1.2587 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5
1.2588 ++echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;}
1.2589 ++ { (exit 1); exit 1; }; } ;;
1.2590 ++ esac
1.2591 ++else
1.2592 ++ newlib_iconv=
1.2593 ++fi
1.2594 ++
1.2595 ++# Check whether --enable-newlib-builtin-converters was given.
1.2596 ++if test "${enable_newlib_builtin_converters+set}" = set; then
1.2597 ++ enableval=$enable_newlib_builtin_converters; if test x${enableval} = x; then
1.2598 ++ { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&5
1.2599 ++echo "$as_me: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&2;}
1.2600 ++ { (exit 1); exit 1; }; }
1.2601 ++ fi
1.2602 ++ builtin_converters=${enableval}
1.2603 ++
1.2604 ++else
1.2605 ++ builtin_converters=
1.2606 ++fi
1.2607 ++
1.2608 ++# Check whether --enable-newlib-multithread was given.
1.2609 ++if test "${enable_newlib_multithread+set}" = set; then
1.2610 ++ enableval=$enable_newlib_multithread; case "${enableval}" in
1.2611 ++ yes) newlib_multithread=yes ;;
1.2612 ++ no) newlib_multithread=no ;;
1.2613 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
1.2614 ++echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;}
1.2615 ++ { (exit 1); exit 1; }; } ;;
1.2616 ++ esac
1.2617 ++else
1.2618 ++ newlib_multithread=yes
1.2619 ++fi
1.2620 ++
1.2621 ++# Check whether --enable-newlib-elix-level was given.
1.2622 ++if test "${enable_newlib_elix_level+set}" = set; then
1.2623 ++ enableval=$enable_newlib_elix_level; case "${enableval}" in
1.2624 ++ 0) newlib_elix_level=0 ;;
1.2625 ++ 1) newlib_elix_level=1 ;;
1.2626 ++ 2) newlib_elix_level=2 ;;
1.2627 ++ 3) newlib_elix_level=3 ;;
1.2628 ++ 4) newlib_elix_level=4 ;;
1.2629 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5
1.2630 ++echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;}
1.2631 ++ { (exit 1); exit 1; }; } ;;
1.2632 ++ esac
1.2633 ++else
1.2634 ++ newlib_elix_level=0
1.2635 ++fi
1.2636 ++
1.2637 ++# Check whether --enable-newlib-io-float was given.
1.2638 ++if test "${enable_newlib_io_float+set}" = set; then
1.2639 ++ enableval=$enable_newlib_io_float; case "${enableval}" in
1.2640 ++ yes) newlib_io_float=yes ;;
1.2641 ++ no) newlib_io_float=no ;;
1.2642 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
1.2643 ++echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;}
1.2644 ++ { (exit 1); exit 1; }; } ;;
1.2645 ++ esac
1.2646 ++else
1.2647 ++ newlib_io_float=yes
1.2648 ++fi
1.2649 ++
1.2650 ++# Check whether --enable-newlib-supplied-syscalls was given.
1.2651 ++if test "${enable_newlib_supplied_syscalls+set}" = set; then
1.2652 ++ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
1.2653 ++ yes) newlib_may_supply_syscalls=yes ;;
1.2654 ++ no) newlib_may_supply_syscalls=no ;;
1.2655 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
1.2656 ++echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;}
1.2657 ++ { (exit 1); exit 1; }; } ;;
1.2658 ++ esac
1.2659 ++else
1.2660 ++ newlib_may_supply_syscalls=yes
1.2661 ++fi
1.2662 ++
1.2663 ++
1.2664 ++
1.2665 ++if test x${newlib_may_supply_syscalls} = xyes; then
1.2666 ++ MAY_SUPPLY_SYSCALLS_TRUE=
1.2667 ++ MAY_SUPPLY_SYSCALLS_FALSE='#'
1.2668 ++else
1.2669 ++ MAY_SUPPLY_SYSCALLS_TRUE='#'
1.2670 ++ MAY_SUPPLY_SYSCALLS_FALSE=
1.2671 ++fi
1.2672 ++
1.2673 ++
1.2674 ++test -z "${with_target_subdir}" && with_target_subdir=.
1.2675 ++
1.2676 ++if test "${srcdir}" = "."; then
1.2677 ++ if test "${with_target_subdir}" != "."; then
1.2678 ++ newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
1.2679 ++ else
1.2680 ++ newlib_basedir="${srcdir}/${with_multisrctop}../../.."
1.2681 ++ fi
1.2682 ++else
1.2683 ++ newlib_basedir="${srcdir}/../../.."
1.2684 ++fi
1.2685 ++
1.2686 ++
1.2687 ++{ echo "$as_me:$LINENO: checking target system type" >&5
1.2688 ++echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
1.2689 ++if test "${ac_cv_target+set}" = set; then
1.2690 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.2691 ++else
1.2692 ++ if test "x$target_alias" = x; then
1.2693 ++ ac_cv_target=$ac_cv_host
1.2694 ++else
1.2695 ++ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
1.2696 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
1.2697 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
1.2698 ++ { (exit 1); exit 1; }; }
1.2699 ++fi
1.2700 ++
1.2701 ++fi
1.2702 ++{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
1.2703 ++echo "${ECHO_T}$ac_cv_target" >&6; }
1.2704 ++case $ac_cv_target in
1.2705 ++*-*-*) ;;
1.2706 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
1.2707 ++echo "$as_me: error: invalid value of canonical target" >&2;}
1.2708 ++ { (exit 1); exit 1; }; };;
1.2709 ++esac
1.2710 ++target=$ac_cv_target
1.2711 ++ac_save_IFS=$IFS; IFS='-'
1.2712 ++set x $ac_cv_target
1.2713 ++shift
1.2714 ++target_cpu=$1
1.2715 ++target_vendor=$2
1.2716 ++shift; shift
1.2717 ++# Remember, the first character of IFS is used to create $*,
1.2718 ++# except with old shells:
1.2719 ++target_os=$*
1.2720 ++IFS=$ac_save_IFS
1.2721 ++case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
1.2722 ++
1.2723 ++
1.2724 ++# The aliases save the names the user supplied, while $host etc.
1.2725 ++# will get canonicalized.
1.2726 ++test -n "$target_alias" &&
1.2727 ++ test "$program_prefix$program_suffix$program_transform_name" = \
1.2728 ++ NONENONEs,x,x, &&
1.2729 ++ program_prefix=${target_alias}-
1.2730 ++
1.2731 ++
1.2732 ++PACKAGE=newlib
1.2733 ++
1.2734 ++VERSION=1.12.0
1.2735 ++
1.2736 ++if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
1.2737 ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
1.2738 ++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
1.2739 ++ { (exit 1); exit 1; }; }
1.2740 ++fi
1.2741 ++
1.2742 ++cat >>confdefs.h <<_ACEOF
1.2743 ++#define PACKAGE "$PACKAGE"
1.2744 ++_ACEOF
1.2745 ++
1.2746 ++
1.2747 ++cat >>confdefs.h <<_ACEOF
1.2748 ++#define VERSION "$VERSION"
1.2749 ++_ACEOF
1.2750 ++
1.2751 ++
1.2752 ++
1.2753 ++missing_dir=`cd $ac_aux_dir && pwd`
1.2754 ++{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
1.2755 ++echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; }
1.2756 ++# Run test in a subshell; some versions of sh will print an error if
1.2757 ++# an executable is not found, even if stderr is redirected.
1.2758 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.2759 ++if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
1.2760 ++ ACLOCAL=aclocal-${am__api_version}
1.2761 ++ { echo "$as_me:$LINENO: result: found" >&5
1.2762 ++echo "${ECHO_T}found" >&6; }
1.2763 ++else
1.2764 ++ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
1.2765 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.2766 ++echo "${ECHO_T}missing" >&6; }
1.2767 ++fi
1.2768 ++
1.2769 ++{ echo "$as_me:$LINENO: checking for working autoconf" >&5
1.2770 ++echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; }
1.2771 ++# Run test in a subshell; some versions of sh will print an error if
1.2772 ++# an executable is not found, even if stderr is redirected.
1.2773 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.2774 ++if (autoconf --version) < /dev/null > /dev/null 2>&1; then
1.2775 ++ AUTOCONF=autoconf
1.2776 ++ { echo "$as_me:$LINENO: result: found" >&5
1.2777 ++echo "${ECHO_T}found" >&6; }
1.2778 ++else
1.2779 ++ AUTOCONF="$missing_dir/missing autoconf"
1.2780 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.2781 ++echo "${ECHO_T}missing" >&6; }
1.2782 ++fi
1.2783 ++
1.2784 ++{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
1.2785 ++echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; }
1.2786 ++# Run test in a subshell; some versions of sh will print an error if
1.2787 ++# an executable is not found, even if stderr is redirected.
1.2788 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.2789 ++if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
1.2790 ++ AUTOMAKE=automake-${am__api_version}
1.2791 ++ { echo "$as_me:$LINENO: result: found" >&5
1.2792 ++echo "${ECHO_T}found" >&6; }
1.2793 ++else
1.2794 ++ AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
1.2795 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.2796 ++echo "${ECHO_T}missing" >&6; }
1.2797 ++fi
1.2798 ++
1.2799 ++{ echo "$as_me:$LINENO: checking for working autoheader" >&5
1.2800 ++echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; }
1.2801 ++# Run test in a subshell; some versions of sh will print an error if
1.2802 ++# an executable is not found, even if stderr is redirected.
1.2803 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.2804 ++if (autoheader --version) < /dev/null > /dev/null 2>&1; then
1.2805 ++ AUTOHEADER=autoheader
1.2806 ++ { echo "$as_me:$LINENO: result: found" >&5
1.2807 ++echo "${ECHO_T}found" >&6; }
1.2808 ++else
1.2809 ++ AUTOHEADER="$missing_dir/missing autoheader"
1.2810 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.2811 ++echo "${ECHO_T}missing" >&6; }
1.2812 ++fi
1.2813 ++
1.2814 ++{ echo "$as_me:$LINENO: checking for working makeinfo" >&5
1.2815 ++echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; }
1.2816 ++# Run test in a subshell; some versions of sh will print an error if
1.2817 ++# an executable is not found, even if stderr is redirected.
1.2818 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.2819 ++if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
1.2820 ++ MAKEINFO=makeinfo
1.2821 ++ { echo "$as_me:$LINENO: result: found" >&5
1.2822 ++echo "${ECHO_T}found" >&6; }
1.2823 ++else
1.2824 ++ MAKEINFO="$missing_dir/missing makeinfo"
1.2825 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.2826 ++echo "${ECHO_T}missing" >&6; }
1.2827 ++fi
1.2828 ++
1.2829 ++
1.2830 ++
1.2831 ++# FIXME: We temporarily define our own version of AC_PROG_CC. This is
1.2832 ++# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
1.2833 ++# are probably using a cross compiler, which will not be able to fully
1.2834 ++# link an executable. This should really be fixed in autoconf
1.2835 ++# itself.
1.2836 ++
1.2837 ++
1.2838 ++
1.2839 ++# Extract the first word of "gcc", so it can be a program name with args.
1.2840 ++set dummy gcc; ac_word=$2
1.2841 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.2842 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.2843 ++if test "${ac_cv_prog_CC+set}" = set; then
1.2844 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.2845 ++else
1.2846 ++ if test -n "$CC"; then
1.2847 ++ ac_cv_prog_CC="$CC" # Let the user override the test.
1.2848 ++else
1.2849 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.2850 ++for as_dir in $PATH
1.2851 ++do
1.2852 ++ IFS=$as_save_IFS
1.2853 ++ test -z "$as_dir" && as_dir=.
1.2854 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.2855 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.2856 ++ ac_cv_prog_CC="gcc"
1.2857 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.2858 ++ break 2
1.2859 ++ fi
1.2860 ++done
1.2861 ++done
1.2862 ++IFS=$as_save_IFS
1.2863 ++
1.2864 ++fi
1.2865 ++fi
1.2866 ++CC=$ac_cv_prog_CC
1.2867 ++if test -n "$CC"; then
1.2868 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.2869 ++echo "${ECHO_T}$CC" >&6; }
1.2870 ++else
1.2871 ++ { echo "$as_me:$LINENO: result: no" >&5
1.2872 ++echo "${ECHO_T}no" >&6; }
1.2873 ++fi
1.2874 ++
1.2875 ++
1.2876 ++if test -z "$CC"; then
1.2877 ++ # Extract the first word of "cc", so it can be a program name with args.
1.2878 ++set dummy cc; ac_word=$2
1.2879 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.2880 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.2881 ++if test "${ac_cv_prog_CC+set}" = set; then
1.2882 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.2883 ++else
1.2884 ++ if test -n "$CC"; then
1.2885 ++ ac_cv_prog_CC="$CC" # Let the user override the test.
1.2886 ++else
1.2887 ++ ac_prog_rejected=no
1.2888 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.2889 ++for as_dir in $PATH
1.2890 ++do
1.2891 ++ IFS=$as_save_IFS
1.2892 ++ test -z "$as_dir" && as_dir=.
1.2893 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.2894 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.2895 ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
1.2896 ++ ac_prog_rejected=yes
1.2897 ++ continue
1.2898 ++ fi
1.2899 ++ ac_cv_prog_CC="cc"
1.2900 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.2901 ++ break 2
1.2902 ++ fi
1.2903 ++done
1.2904 ++done
1.2905 ++IFS=$as_save_IFS
1.2906 ++
1.2907 ++if test $ac_prog_rejected = yes; then
1.2908 ++ # We found a bogon in the path, so make sure we never use it.
1.2909 ++ set dummy $ac_cv_prog_CC
1.2910 ++ shift
1.2911 ++ if test $# != 0; then
1.2912 ++ # We chose a different compiler from the bogus one.
1.2913 ++ # However, it has the same basename, so the bogon will be chosen
1.2914 ++ # first if we set CC to just the basename; use the full file name.
1.2915 ++ shift
1.2916 ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
1.2917 ++ fi
1.2918 ++fi
1.2919 ++fi
1.2920 ++fi
1.2921 ++CC=$ac_cv_prog_CC
1.2922 ++if test -n "$CC"; then
1.2923 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.2924 ++echo "${ECHO_T}$CC" >&6; }
1.2925 ++else
1.2926 ++ { echo "$as_me:$LINENO: result: no" >&5
1.2927 ++echo "${ECHO_T}no" >&6; }
1.2928 ++fi
1.2929 ++
1.2930 ++
1.2931 ++ test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
1.2932 ++echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
1.2933 ++ { (exit 1); exit 1; }; }
1.2934 ++fi
1.2935 ++
1.2936 ++#AC_PROG_CC_GNU
1.2937 ++
1.2938 ++if test $ac_cv_c_compiler_gnu = yes; then
1.2939 ++ GCC=yes
1.2940 ++ ac_test_CFLAGS="${CFLAGS+set}"
1.2941 ++ ac_save_CFLAGS="$CFLAGS"
1.2942 ++ CFLAGS=
1.2943 ++# AC_PROG_CC_G
1.2944 ++ if test "$ac_test_CFLAGS" = set; then
1.2945 ++ CFLAGS="$ac_save_CFLAGS"
1.2946 ++ elif test $ac_cv_prog_cc_g = yes; then
1.2947 ++ CFLAGS="-g -O2"
1.2948 ++ else
1.2949 ++ CFLAGS="-O2"
1.2950 ++ fi
1.2951 ++else
1.2952 ++ GCC=
1.2953 ++ test "${CFLAGS+set}" = set || CFLAGS="-g"
1.2954 ++fi
1.2955 ++
1.2956 ++
1.2957 ++if test -n "$ac_tool_prefix"; then
1.2958 ++ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
1.2959 ++set dummy ${ac_tool_prefix}as; ac_word=$2
1.2960 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.2961 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.2962 ++if test "${ac_cv_prog_AS+set}" = set; then
1.2963 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.2964 ++else
1.2965 ++ if test -n "$AS"; then
1.2966 ++ ac_cv_prog_AS="$AS" # Let the user override the test.
1.2967 ++else
1.2968 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.2969 ++for as_dir in $PATH
1.2970 ++do
1.2971 ++ IFS=$as_save_IFS
1.2972 ++ test -z "$as_dir" && as_dir=.
1.2973 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.2974 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.2975 ++ ac_cv_prog_AS="${ac_tool_prefix}as"
1.2976 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.2977 ++ break 2
1.2978 ++ fi
1.2979 ++done
1.2980 ++done
1.2981 ++IFS=$as_save_IFS
1.2982 ++
1.2983 ++fi
1.2984 ++fi
1.2985 ++AS=$ac_cv_prog_AS
1.2986 ++if test -n "$AS"; then
1.2987 ++ { echo "$as_me:$LINENO: result: $AS" >&5
1.2988 ++echo "${ECHO_T}$AS" >&6; }
1.2989 ++else
1.2990 ++ { echo "$as_me:$LINENO: result: no" >&5
1.2991 ++echo "${ECHO_T}no" >&6; }
1.2992 ++fi
1.2993 ++
1.2994 ++
1.2995 ++fi
1.2996 ++if test -z "$ac_cv_prog_AS"; then
1.2997 ++ ac_ct_AS=$AS
1.2998 ++ # Extract the first word of "as", so it can be a program name with args.
1.2999 ++set dummy as; ac_word=$2
1.3000 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.3001 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.3002 ++if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
1.3003 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.3004 ++else
1.3005 ++ if test -n "$ac_ct_AS"; then
1.3006 ++ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
1.3007 ++else
1.3008 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.3009 ++for as_dir in $PATH
1.3010 ++do
1.3011 ++ IFS=$as_save_IFS
1.3012 ++ test -z "$as_dir" && as_dir=.
1.3013 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.3014 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.3015 ++ ac_cv_prog_ac_ct_AS="as"
1.3016 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.3017 ++ break 2
1.3018 ++ fi
1.3019 ++done
1.3020 ++done
1.3021 ++IFS=$as_save_IFS
1.3022 ++
1.3023 ++fi
1.3024 ++fi
1.3025 ++ac_ct_AS=$ac_cv_prog_ac_ct_AS
1.3026 ++if test -n "$ac_ct_AS"; then
1.3027 ++ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.3028 ++echo "${ECHO_T}$ac_ct_AS" >&6; }
1.3029 ++else
1.3030 ++ { echo "$as_me:$LINENO: result: no" >&5
1.3031 ++echo "${ECHO_T}no" >&6; }
1.3032 ++fi
1.3033 ++
1.3034 ++ if test "x$ac_ct_AS" = x; then
1.3035 ++ AS=""
1.3036 ++ else
1.3037 ++ case $cross_compiling:$ac_tool_warned in
1.3038 ++yes:)
1.3039 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.3040 ++whose name does not start with the host triplet. If you think this
1.3041 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.3042 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.3043 ++whose name does not start with the host triplet. If you think this
1.3044 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.3045 ++ac_tool_warned=yes ;;
1.3046 ++esac
1.3047 ++ AS=$ac_ct_AS
1.3048 ++ fi
1.3049 ++else
1.3050 ++ AS="$ac_cv_prog_AS"
1.3051 ++fi
1.3052 ++
1.3053 ++if test -n "$ac_tool_prefix"; then
1.3054 ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
1.3055 ++set dummy ${ac_tool_prefix}ar; ac_word=$2
1.3056 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.3057 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.3058 ++if test "${ac_cv_prog_AR+set}" = set; then
1.3059 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.3060 ++else
1.3061 ++ if test -n "$AR"; then
1.3062 ++ ac_cv_prog_AR="$AR" # Let the user override the test.
1.3063 ++else
1.3064 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.3065 ++for as_dir in $PATH
1.3066 ++do
1.3067 ++ IFS=$as_save_IFS
1.3068 ++ test -z "$as_dir" && as_dir=.
1.3069 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.3070 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.3071 ++ ac_cv_prog_AR="${ac_tool_prefix}ar"
1.3072 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.3073 ++ break 2
1.3074 ++ fi
1.3075 ++done
1.3076 ++done
1.3077 ++IFS=$as_save_IFS
1.3078 ++
1.3079 ++fi
1.3080 ++fi
1.3081 ++AR=$ac_cv_prog_AR
1.3082 ++if test -n "$AR"; then
1.3083 ++ { echo "$as_me:$LINENO: result: $AR" >&5
1.3084 ++echo "${ECHO_T}$AR" >&6; }
1.3085 ++else
1.3086 ++ { echo "$as_me:$LINENO: result: no" >&5
1.3087 ++echo "${ECHO_T}no" >&6; }
1.3088 ++fi
1.3089 ++
1.3090 ++
1.3091 ++fi
1.3092 ++if test -z "$ac_cv_prog_AR"; then
1.3093 ++ ac_ct_AR=$AR
1.3094 ++ # Extract the first word of "ar", so it can be a program name with args.
1.3095 ++set dummy ar; ac_word=$2
1.3096 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.3097 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.3098 ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
1.3099 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.3100 ++else
1.3101 ++ if test -n "$ac_ct_AR"; then
1.3102 ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
1.3103 ++else
1.3104 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.3105 ++for as_dir in $PATH
1.3106 ++do
1.3107 ++ IFS=$as_save_IFS
1.3108 ++ test -z "$as_dir" && as_dir=.
1.3109 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.3110 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.3111 ++ ac_cv_prog_ac_ct_AR="ar"
1.3112 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.3113 ++ break 2
1.3114 ++ fi
1.3115 ++done
1.3116 ++done
1.3117 ++IFS=$as_save_IFS
1.3118 ++
1.3119 ++fi
1.3120 ++fi
1.3121 ++ac_ct_AR=$ac_cv_prog_ac_ct_AR
1.3122 ++if test -n "$ac_ct_AR"; then
1.3123 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.3124 ++echo "${ECHO_T}$ac_ct_AR" >&6; }
1.3125 ++else
1.3126 ++ { echo "$as_me:$LINENO: result: no" >&5
1.3127 ++echo "${ECHO_T}no" >&6; }
1.3128 ++fi
1.3129 ++
1.3130 ++ if test "x$ac_ct_AR" = x; then
1.3131 ++ AR=""
1.3132 ++ else
1.3133 ++ case $cross_compiling:$ac_tool_warned in
1.3134 ++yes:)
1.3135 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.3136 ++whose name does not start with the host triplet. If you think this
1.3137 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.3138 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.3139 ++whose name does not start with the host triplet. If you think this
1.3140 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.3141 ++ac_tool_warned=yes ;;
1.3142 ++esac
1.3143 ++ AR=$ac_ct_AR
1.3144 ++ fi
1.3145 ++else
1.3146 ++ AR="$ac_cv_prog_AR"
1.3147 ++fi
1.3148 ++
1.3149 ++if test -n "$ac_tool_prefix"; then
1.3150 ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
1.3151 ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2
1.3152 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.3153 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.3154 ++if test "${ac_cv_prog_RANLIB+set}" = set; then
1.3155 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.3156 ++else
1.3157 ++ if test -n "$RANLIB"; then
1.3158 ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
1.3159 ++else
1.3160 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.3161 ++for as_dir in $PATH
1.3162 ++do
1.3163 ++ IFS=$as_save_IFS
1.3164 ++ test -z "$as_dir" && as_dir=.
1.3165 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.3166 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.3167 ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
1.3168 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.3169 ++ break 2
1.3170 ++ fi
1.3171 ++done
1.3172 ++done
1.3173 ++IFS=$as_save_IFS
1.3174 ++
1.3175 ++fi
1.3176 ++fi
1.3177 ++RANLIB=$ac_cv_prog_RANLIB
1.3178 ++if test -n "$RANLIB"; then
1.3179 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5
1.3180 ++echo "${ECHO_T}$RANLIB" >&6; }
1.3181 ++else
1.3182 ++ { echo "$as_me:$LINENO: result: no" >&5
1.3183 ++echo "${ECHO_T}no" >&6; }
1.3184 ++fi
1.3185 ++
1.3186 ++
1.3187 ++fi
1.3188 ++if test -z "$ac_cv_prog_RANLIB"; then
1.3189 ++ ac_ct_RANLIB=$RANLIB
1.3190 ++ # Extract the first word of "ranlib", so it can be a program name with args.
1.3191 ++set dummy ranlib; ac_word=$2
1.3192 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.3193 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.3194 ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
1.3195 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.3196 ++else
1.3197 ++ if test -n "$ac_ct_RANLIB"; then
1.3198 ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
1.3199 ++else
1.3200 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.3201 ++for as_dir in $PATH
1.3202 ++do
1.3203 ++ IFS=$as_save_IFS
1.3204 ++ test -z "$as_dir" && as_dir=.
1.3205 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.3206 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.3207 ++ ac_cv_prog_ac_ct_RANLIB="ranlib"
1.3208 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.3209 ++ break 2
1.3210 ++ fi
1.3211 ++done
1.3212 ++done
1.3213 ++IFS=$as_save_IFS
1.3214 ++
1.3215 ++fi
1.3216 ++fi
1.3217 ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
1.3218 ++if test -n "$ac_ct_RANLIB"; then
1.3219 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.3220 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
1.3221 ++else
1.3222 ++ { echo "$as_me:$LINENO: result: no" >&5
1.3223 ++echo "${ECHO_T}no" >&6; }
1.3224 ++fi
1.3225 ++
1.3226 ++ if test "x$ac_ct_RANLIB" = x; then
1.3227 ++ RANLIB=":"
1.3228 ++ else
1.3229 ++ case $cross_compiling:$ac_tool_warned in
1.3230 ++yes:)
1.3231 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.3232 ++whose name does not start with the host triplet. If you think this
1.3233 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.3234 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.3235 ++whose name does not start with the host triplet. If you think this
1.3236 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.3237 ++ac_tool_warned=yes ;;
1.3238 ++esac
1.3239 ++ RANLIB=$ac_ct_RANLIB
1.3240 ++ fi
1.3241 ++else
1.3242 ++ RANLIB="$ac_cv_prog_RANLIB"
1.3243 ++fi
1.3244 ++
1.3245 ++
1.3246 ++# Find a good install program. We prefer a C program (faster),
1.3247 ++# so one script is as good as another. But avoid the broken or
1.3248 ++# incompatible versions:
1.3249 ++# SysV /etc/install, /usr/sbin/install
1.3250 ++# SunOS /usr/etc/install
1.3251 ++# IRIX /sbin/install
1.3252 ++# AIX /bin/install
1.3253 ++# AmigaOS /C/install, which installs bootblocks on floppy discs
1.3254 ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
1.3255 ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
1.3256 ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1.3257 ++# OS/2's system install, which has a completely different semantic
1.3258 ++# ./install, which can be erroneously created by make from ./install.sh.
1.3259 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.3260 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
1.3261 ++if test -z "$INSTALL"; then
1.3262 ++if test "${ac_cv_path_install+set}" = set; then
1.3263 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.3264 ++else
1.3265 ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.3266 ++for as_dir in $PATH
1.3267 ++do
1.3268 ++ IFS=$as_save_IFS
1.3269 ++ test -z "$as_dir" && as_dir=.
1.3270 ++ # Account for people who put trailing slashes in PATH elements.
1.3271 ++case $as_dir/ in
1.3272 ++ ./ | .// | /cC/* | \
1.3273 ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
1.3274 ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
1.3275 ++ /usr/ucb/* ) ;;
1.3276 ++ *)
1.3277 ++ # OSF1 and SCO ODT 3.0 have their own names for install.
1.3278 ++ # Don't use installbsd from OSF since it installs stuff as root
1.3279 ++ # by default.
1.3280 ++ for ac_prog in ginstall scoinst install; do
1.3281 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.3282 ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
1.3283 ++ if test $ac_prog = install &&
1.3284 ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.3285 ++ # AIX install. It has an incompatible calling convention.
1.3286 ++ :
1.3287 ++ elif test $ac_prog = install &&
1.3288 ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.3289 ++ # program-specific install script used by HP pwplus--don't use.
1.3290 ++ :
1.3291 ++ else
1.3292 ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
1.3293 ++ break 3
1.3294 ++ fi
1.3295 ++ fi
1.3296 ++ done
1.3297 ++ done
1.3298 ++ ;;
1.3299 ++esac
1.3300 ++done
1.3301 ++IFS=$as_save_IFS
1.3302 ++
1.3303 ++
1.3304 ++fi
1.3305 ++ if test "${ac_cv_path_install+set}" = set; then
1.3306 ++ INSTALL=$ac_cv_path_install
1.3307 ++ else
1.3308 ++ # As a last resort, use the slow shell script. Don't cache a
1.3309 ++ # value for INSTALL within a source directory, because that will
1.3310 ++ # break other packages using the cache if that directory is
1.3311 ++ # removed, or if the value is a relative name.
1.3312 ++ INSTALL=$ac_install_sh
1.3313 ++ fi
1.3314 ++fi
1.3315 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
1.3316 ++echo "${ECHO_T}$INSTALL" >&6; }
1.3317 ++
1.3318 ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1.3319 ++# It thinks the first close brace ends the variable substitution.
1.3320 ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
1.3321 ++
1.3322 ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
1.3323 ++
1.3324 ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1.3325 ++
1.3326 ++
1.3327 ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
1.3328 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
1.3329 ++ # Check whether --enable-maintainer-mode was given.
1.3330 ++if test "${enable_maintainer_mode+set}" = set; then
1.3331 ++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
1.3332 ++else
1.3333 ++ USE_MAINTAINER_MODE=no
1.3334 ++fi
1.3335 ++
1.3336 ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
1.3337 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
1.3338 ++
1.3339 ++
1.3340 ++if test $USE_MAINTAINER_MODE = yes; then
1.3341 ++ MAINTAINER_MODE_TRUE=
1.3342 ++ MAINTAINER_MODE_FALSE='#'
1.3343 ++else
1.3344 ++ MAINTAINER_MODE_TRUE='#'
1.3345 ++ MAINTAINER_MODE_FALSE=
1.3346 ++fi
1.3347 ++ MAINT=$MAINTAINER_MODE_TRUE
1.3348 ++
1.3349 ++
1.3350 ++
1.3351 ++# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
1.3352 ++# at least currently, we never actually build a program, so we never
1.3353 ++# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
1.3354 ++# fails, because we are probably configuring with a cross compiler
1.3355 ++# which can't create executables. So we include AC_EXEEXT to keep
1.3356 ++# automake happy, but we don't execute it, since we don't care about
1.3357 ++# the result.
1.3358 ++#if false; then
1.3359 ++#
1.3360 ++#fi
1.3361 ++
1.3362 ++. ${newlib_basedir}/configure.host
1.3363 ++
1.3364 ++newlib_cflags="${newlib_cflags} -fno-builtin"
1.3365 ++
1.3366 ++NEWLIB_CFLAGS=${newlib_cflags}
1.3367 ++
1.3368 ++
1.3369 ++LDFLAGS=${ldflags}
1.3370 ++
1.3371 ++
1.3372 ++
1.3373 ++
1.3374 ++if test x${newlib_elix_level} = x0; then
1.3375 ++ ELIX_LEVEL_0_TRUE=
1.3376 ++ ELIX_LEVEL_0_FALSE='#'
1.3377 ++else
1.3378 ++ ELIX_LEVEL_0_TRUE='#'
1.3379 ++ ELIX_LEVEL_0_FALSE=
1.3380 ++fi
1.3381 ++
1.3382 ++
1.3383 ++if test x${newlib_elix_level} = x1; then
1.3384 ++ ELIX_LEVEL_1_TRUE=
1.3385 ++ ELIX_LEVEL_1_FALSE='#'
1.3386 ++else
1.3387 ++ ELIX_LEVEL_1_TRUE='#'
1.3388 ++ ELIX_LEVEL_1_FALSE=
1.3389 ++fi
1.3390 ++
1.3391 ++
1.3392 ++if test x${newlib_elix_level} = x2; then
1.3393 ++ ELIX_LEVEL_2_TRUE=
1.3394 ++ ELIX_LEVEL_2_FALSE='#'
1.3395 ++else
1.3396 ++ ELIX_LEVEL_2_TRUE='#'
1.3397 ++ ELIX_LEVEL_2_FALSE=
1.3398 ++fi
1.3399 ++
1.3400 ++
1.3401 ++if test x${newlib_elix_level} = x3; then
1.3402 ++ ELIX_LEVEL_3_TRUE=
1.3403 ++ ELIX_LEVEL_3_FALSE='#'
1.3404 ++else
1.3405 ++ ELIX_LEVEL_3_TRUE='#'
1.3406 ++ ELIX_LEVEL_3_FALSE=
1.3407 ++fi
1.3408 ++
1.3409 ++
1.3410 ++if test x${newlib_elix_level} = x4; then
1.3411 ++ ELIX_LEVEL_4_TRUE=
1.3412 ++ ELIX_LEVEL_4_FALSE='#'
1.3413 ++else
1.3414 ++ ELIX_LEVEL_4_TRUE='#'
1.3415 ++ ELIX_LEVEL_4_FALSE=
1.3416 ++fi
1.3417 ++
1.3418 ++
1.3419 ++
1.3420 ++if test x${use_libtool} = xyes; then
1.3421 ++ USE_LIBTOOL_TRUE=
1.3422 ++ USE_LIBTOOL_FALSE='#'
1.3423 ++else
1.3424 ++ USE_LIBTOOL_TRUE='#'
1.3425 ++ USE_LIBTOOL_FALSE=
1.3426 ++fi
1.3427 ++
1.3428 ++# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we
1.3429 ++# use oext, which is set in configure.host based on the target platform.
1.3430 ++OBJEXT=${oext}
1.3431 ++
1.3432 ++
1.3433 ++
1.3434 ++
1.3435 ++
1.3436 ++
1.3437 ++
1.3438 ++
1.3439 ++
1.3440 ++
1.3441 ++ac_config_files="$ac_config_files Makefile"
1.3442 ++
1.3443 ++cat >confcache <<\_ACEOF
1.3444 ++# This file is a shell script that caches the results of configure
1.3445 ++# tests run on this system so they can be shared between configure
1.3446 ++# scripts and configure runs, see configure's option --config-cache.
1.3447 ++# It is not useful on other systems. If it contains results you don't
1.3448 ++# want to keep, you may remove or edit it.
1.3449 ++#
1.3450 ++# config.status only pays attention to the cache file if you give it
1.3451 ++# the --recheck option to rerun configure.
1.3452 ++#
1.3453 ++# `ac_cv_env_foo' variables (set or unset) will be overridden when
1.3454 ++# loading this file, other *unset* `ac_cv_foo' will be assigned the
1.3455 ++# following values.
1.3456 ++
1.3457 ++_ACEOF
1.3458 ++
1.3459 ++# The following way of writing the cache mishandles newlines in values,
1.3460 ++# but we know of no workaround that is simple, portable, and efficient.
1.3461 ++# So, we kill variables containing newlines.
1.3462 ++# Ultrix sh set writes to stderr and can't be redirected directly,
1.3463 ++# and sets the high bit in the cache file unless we assign to the vars.
1.3464 ++(
1.3465 ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
1.3466 ++ eval ac_val=\$$ac_var
1.3467 ++ case $ac_val in #(
1.3468 ++ *${as_nl}*)
1.3469 ++ case $ac_var in #(
1.3470 ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
1.3471 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
1.3472 ++ esac
1.3473 ++ case $ac_var in #(
1.3474 ++ _ | IFS | as_nl) ;; #(
1.3475 ++ *) $as_unset $ac_var ;;
1.3476 ++ esac ;;
1.3477 ++ esac
1.3478 ++ done
1.3479 ++
1.3480 ++ (set) 2>&1 |
1.3481 ++ case $as_nl`(ac_space=' '; set) 2>&1` in #(
1.3482 ++ *${as_nl}ac_space=\ *)
1.3483 ++ # `set' does not quote correctly, so add quotes (double-quote
1.3484 ++ # substitution turns \\\\ into \\, and sed turns \\ into \).
1.3485 ++ sed -n \
1.3486 ++ "s/'/'\\\\''/g;
1.3487 ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1.3488 ++ ;; #(
1.3489 ++ *)
1.3490 ++ # `set' quotes correctly as required by POSIX, so do not add quotes.
1.3491 ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
1.3492 ++ ;;
1.3493 ++ esac |
1.3494 ++ sort
1.3495 ++) |
1.3496 ++ sed '
1.3497 ++ /^ac_cv_env_/b end
1.3498 ++ t clear
1.3499 ++ :clear
1.3500 ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1.3501 ++ t end
1.3502 ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1.3503 ++ :end' >>confcache
1.3504 ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
1.3505 ++ if test -w "$cache_file"; then
1.3506 ++ test "x$cache_file" != "x/dev/null" &&
1.3507 ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
1.3508 ++echo "$as_me: updating cache $cache_file" >&6;}
1.3509 ++ cat confcache >$cache_file
1.3510 ++ else
1.3511 ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
1.3512 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;}
1.3513 ++ fi
1.3514 ++fi
1.3515 ++rm -f confcache
1.3516 ++
1.3517 ++test "x$prefix" = xNONE && prefix=$ac_default_prefix
1.3518 ++# Let make expand exec_prefix.
1.3519 ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1.3520 ++
1.3521 ++# Transform confdefs.h into DEFS.
1.3522 ++# Protect against shell expansion while executing Makefile rules.
1.3523 ++# Protect against Makefile macro expansion.
1.3524 ++#
1.3525 ++# If the first sed substitution is executed (which looks for macros that
1.3526 ++# take arguments), then branch to the quote section. Otherwise,
1.3527 ++# look for a macro that doesn't take arguments.
1.3528 ++ac_script='
1.3529 ++t clear
1.3530 ++:clear
1.3531 ++s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
1.3532 ++t quote
1.3533 ++s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
1.3534 ++t quote
1.3535 ++b any
1.3536 ++:quote
1.3537 ++s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
1.3538 ++s/\[/\\&/g
1.3539 ++s/\]/\\&/g
1.3540 ++s/\$/$$/g
1.3541 ++H
1.3542 ++:any
1.3543 ++${
1.3544 ++ g
1.3545 ++ s/^\n//
1.3546 ++ s/\n/ /g
1.3547 ++ p
1.3548 ++}
1.3549 ++'
1.3550 ++DEFS=`sed -n "$ac_script" confdefs.h`
1.3551 ++
1.3552 ++
1.3553 ++ac_libobjs=
1.3554 ++ac_ltlibobjs=
1.3555 ++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
1.3556 ++ # 1. Remove the extension, and $U if already installed.
1.3557 ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
1.3558 ++ ac_i=`echo "$ac_i" | sed "$ac_script"`
1.3559 ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
1.3560 ++ # will be set to the directory where LIBOBJS objects are built.
1.3561 ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
1.3562 ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
1.3563 ++done
1.3564 ++LIBOBJS=$ac_libobjs
1.3565 ++
1.3566 ++LTLIBOBJS=$ac_ltlibobjs
1.3567 ++
1.3568 ++
1.3569 ++
1.3570 ++: ${CONFIG_STATUS=./config.status}
1.3571 ++ac_clean_files_save=$ac_clean_files
1.3572 ++ac_clean_files="$ac_clean_files $CONFIG_STATUS"
1.3573 ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
1.3574 ++echo "$as_me: creating $CONFIG_STATUS" >&6;}
1.3575 ++cat >$CONFIG_STATUS <<_ACEOF
1.3576 ++#! $SHELL
1.3577 ++# Generated by $as_me.
1.3578 ++# Run this file to recreate the current configuration.
1.3579 ++# Compiler output produced by configure, useful for debugging
1.3580 ++# configure, is in config.log if it exists.
1.3581 ++
1.3582 ++debug=false
1.3583 ++ac_cs_recheck=false
1.3584 ++ac_cs_silent=false
1.3585 ++SHELL=\${CONFIG_SHELL-$SHELL}
1.3586 ++_ACEOF
1.3587 ++
1.3588 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.3589 ++## --------------------- ##
1.3590 ++## M4sh Initialization. ##
1.3591 ++## --------------------- ##
1.3592 ++
1.3593 ++# Be more Bourne compatible
1.3594 ++DUALCASE=1; export DUALCASE # for MKS sh
1.3595 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.3596 ++ emulate sh
1.3597 ++ NULLCMD=:
1.3598 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.3599 ++ # is contrary to our usage. Disable this feature.
1.3600 ++ alias -g '${1+"$@"}'='"$@"'
1.3601 ++ setopt NO_GLOB_SUBST
1.3602 ++else
1.3603 ++ case `(set -o) 2>/dev/null` in
1.3604 ++ *posix*) set -o posix ;;
1.3605 ++esac
1.3606 ++
1.3607 ++fi
1.3608 ++
1.3609 ++
1.3610 ++
1.3611 ++
1.3612 ++# PATH needs CR
1.3613 ++# Avoid depending upon Character Ranges.
1.3614 ++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.3615 ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.3616 ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.3617 ++as_cr_digits='0123456789'
1.3618 ++as_cr_alnum=$as_cr_Letters$as_cr_digits
1.3619 ++
1.3620 ++# The user is always right.
1.3621 ++if test "${PATH_SEPARATOR+set}" != set; then
1.3622 ++ echo "#! /bin/sh" >conf$$.sh
1.3623 ++ echo "exit 0" >>conf$$.sh
1.3624 ++ chmod +x conf$$.sh
1.3625 ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.3626 ++ PATH_SEPARATOR=';'
1.3627 ++ else
1.3628 ++ PATH_SEPARATOR=:
1.3629 ++ fi
1.3630 ++ rm -f conf$$.sh
1.3631 ++fi
1.3632 ++
1.3633 ++# Support unset when possible.
1.3634 ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.3635 ++ as_unset=unset
1.3636 ++else
1.3637 ++ as_unset=false
1.3638 ++fi
1.3639 ++
1.3640 ++
1.3641 ++# IFS
1.3642 ++# We need space, tab and new line, in precisely that order. Quoting is
1.3643 ++# there to prevent editors from complaining about space-tab.
1.3644 ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
1.3645 ++# splitting by setting IFS to empty value.)
1.3646 ++as_nl='
1.3647 ++'
1.3648 ++IFS=" "" $as_nl"
1.3649 ++
1.3650 ++# Find who we are. Look in the path if we contain no directory separator.
1.3651 ++case $0 in
1.3652 ++ *[\\/]* ) as_myself=$0 ;;
1.3653 ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.3654 ++for as_dir in $PATH
1.3655 ++do
1.3656 ++ IFS=$as_save_IFS
1.3657 ++ test -z "$as_dir" && as_dir=.
1.3658 ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.3659 ++done
1.3660 ++IFS=$as_save_IFS
1.3661 ++
1.3662 ++ ;;
1.3663 ++esac
1.3664 ++# We did not find ourselves, most probably we were run as `sh COMMAND'
1.3665 ++# in which case we are not to be found in the path.
1.3666 ++if test "x$as_myself" = x; then
1.3667 ++ as_myself=$0
1.3668 ++fi
1.3669 ++if test ! -f "$as_myself"; then
1.3670 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
1.3671 ++ { (exit 1); exit 1; }
1.3672 ++fi
1.3673 ++
1.3674 ++# Work around bugs in pre-3.0 UWIN ksh.
1.3675 ++for as_var in ENV MAIL MAILPATH
1.3676 ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.3677 ++done
1.3678 ++PS1='$ '
1.3679 ++PS2='> '
1.3680 ++PS4='+ '
1.3681 ++
1.3682 ++# NLS nuisances.
1.3683 ++for as_var in \
1.3684 ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
1.3685 ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
1.3686 ++ LC_TELEPHONE LC_TIME
1.3687 ++do
1.3688 ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1.3689 ++ eval $as_var=C; export $as_var
1.3690 ++ else
1.3691 ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.3692 ++ fi
1.3693 ++done
1.3694 ++
1.3695 ++# Required to use basename.
1.3696 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.3697 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.3698 ++ as_expr=expr
1.3699 ++else
1.3700 ++ as_expr=false
1.3701 ++fi
1.3702 ++
1.3703 ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
1.3704 ++ as_basename=basename
1.3705 ++else
1.3706 ++ as_basename=false
1.3707 ++fi
1.3708 ++
1.3709 ++
1.3710 ++# Name of the executable.
1.3711 ++as_me=`$as_basename -- "$0" ||
1.3712 ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1.3713 ++ X"$0" : 'X\(//\)$' \| \
1.3714 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.3715 ++echo X/"$0" |
1.3716 ++ sed '/^.*\/\([^/][^/]*\)\/*$/{
1.3717 ++ s//\1/
1.3718 ++ q
1.3719 ++ }
1.3720 ++ /^X\/\(\/\/\)$/{
1.3721 ++ s//\1/
1.3722 ++ q
1.3723 ++ }
1.3724 ++ /^X\/\(\/\).*/{
1.3725 ++ s//\1/
1.3726 ++ q
1.3727 ++ }
1.3728 ++ s/.*/./; q'`
1.3729 ++
1.3730 ++# CDPATH.
1.3731 ++$as_unset CDPATH
1.3732 ++
1.3733 ++
1.3734 ++
1.3735 ++ as_lineno_1=$LINENO
1.3736 ++ as_lineno_2=$LINENO
1.3737 ++ test "x$as_lineno_1" != "x$as_lineno_2" &&
1.3738 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
1.3739 ++
1.3740 ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1.3741 ++ # uniformly replaced by the line number. The first 'sed' inserts a
1.3742 ++ # line-number line after each line using $LINENO; the second 'sed'
1.3743 ++ # does the real work. The second script uses 'N' to pair each
1.3744 ++ # line-number line with the line containing $LINENO, and appends
1.3745 ++ # trailing '-' during substitution so that $LINENO is not a special
1.3746 ++ # case at line end.
1.3747 ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1.3748 ++ # scripts with optimization help from Paolo Bonzini. Blame Lee
1.3749 ++ # E. McMahon (1931-1989) for sed's syntax. :-)
1.3750 ++ sed -n '
1.3751 ++ p
1.3752 ++ /[$]LINENO/=
1.3753 ++ ' <$as_myself |
1.3754 ++ sed '
1.3755 ++ s/[$]LINENO.*/&-/
1.3756 ++ t lineno
1.3757 ++ b
1.3758 ++ :lineno
1.3759 ++ N
1.3760 ++ :loop
1.3761 ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
1.3762 ++ t loop
1.3763 ++ s/-\n.*//
1.3764 ++ ' >$as_me.lineno &&
1.3765 ++ chmod +x "$as_me.lineno" ||
1.3766 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
1.3767 ++ { (exit 1); exit 1; }; }
1.3768 ++
1.3769 ++ # Don't try to exec as it changes $[0], causing all sort of problems
1.3770 ++ # (the dirname of $[0] is not the place where we might find the
1.3771 ++ # original and so on. Autoconf is especially sensitive to this).
1.3772 ++ . "./$as_me.lineno"
1.3773 ++ # Exit status is that of the last command.
1.3774 ++ exit
1.3775 ++}
1.3776 ++
1.3777 ++
1.3778 ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
1.3779 ++ as_dirname=dirname
1.3780 ++else
1.3781 ++ as_dirname=false
1.3782 ++fi
1.3783 ++
1.3784 ++ECHO_C= ECHO_N= ECHO_T=
1.3785 ++case `echo -n x` in
1.3786 ++-n*)
1.3787 ++ case `echo 'x\c'` in
1.3788 ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
1.3789 ++ *) ECHO_C='\c';;
1.3790 ++ esac;;
1.3791 ++*)
1.3792 ++ ECHO_N='-n';;
1.3793 ++esac
1.3794 ++
1.3795 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.3796 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.3797 ++ as_expr=expr
1.3798 ++else
1.3799 ++ as_expr=false
1.3800 ++fi
1.3801 ++
1.3802 ++rm -f conf$$ conf$$.exe conf$$.file
1.3803 ++if test -d conf$$.dir; then
1.3804 ++ rm -f conf$$.dir/conf$$.file
1.3805 ++else
1.3806 ++ rm -f conf$$.dir
1.3807 ++ mkdir conf$$.dir
1.3808 ++fi
1.3809 ++echo >conf$$.file
1.3810 ++if ln -s conf$$.file conf$$ 2>/dev/null; then
1.3811 ++ as_ln_s='ln -s'
1.3812 ++ # ... but there are two gotchas:
1.3813 ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
1.3814 ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
1.3815 ++ # In both cases, we have to default to `cp -p'.
1.3816 ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
1.3817 ++ as_ln_s='cp -p'
1.3818 ++elif ln conf$$.file conf$$ 2>/dev/null; then
1.3819 ++ as_ln_s=ln
1.3820 ++else
1.3821 ++ as_ln_s='cp -p'
1.3822 ++fi
1.3823 ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
1.3824 ++rmdir conf$$.dir 2>/dev/null
1.3825 ++
1.3826 ++if mkdir -p . 2>/dev/null; then
1.3827 ++ as_mkdir_p=:
1.3828 ++else
1.3829 ++ test -d ./-p && rmdir ./-p
1.3830 ++ as_mkdir_p=false
1.3831 ++fi
1.3832 ++
1.3833 ++if test -x / >/dev/null 2>&1; then
1.3834 ++ as_test_x='test -x'
1.3835 ++else
1.3836 ++ if ls -dL / >/dev/null 2>&1; then
1.3837 ++ as_ls_L_option=L
1.3838 ++ else
1.3839 ++ as_ls_L_option=
1.3840 ++ fi
1.3841 ++ as_test_x='
1.3842 ++ eval sh -c '\''
1.3843 ++ if test -d "$1"; then
1.3844 ++ test -d "$1/.";
1.3845 ++ else
1.3846 ++ case $1 in
1.3847 ++ -*)set "./$1";;
1.3848 ++ esac;
1.3849 ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
1.3850 ++ ???[sx]*):;;*)false;;esac;fi
1.3851 ++ '\'' sh
1.3852 ++ '
1.3853 ++fi
1.3854 ++as_executable_p=$as_test_x
1.3855 ++
1.3856 ++# Sed expression to map a string onto a valid CPP name.
1.3857 ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1.3858 ++
1.3859 ++# Sed expression to map a string onto a valid variable name.
1.3860 ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1.3861 ++
1.3862 ++
1.3863 ++exec 6>&1
1.3864 ++
1.3865 ++# Save the log message, to keep $[0] and so on meaningful, and to
1.3866 ++# report actual input values of CONFIG_FILES etc. instead of their
1.3867 ++# values after options handling.
1.3868 ++ac_log="
1.3869 ++This file was extended by newlib $as_me NEWLIB_VERSION, which was
1.3870 ++generated by GNU Autoconf 2.61. Invocation command line was
1.3871 ++
1.3872 ++ CONFIG_FILES = $CONFIG_FILES
1.3873 ++ CONFIG_HEADERS = $CONFIG_HEADERS
1.3874 ++ CONFIG_LINKS = $CONFIG_LINKS
1.3875 ++ CONFIG_COMMANDS = $CONFIG_COMMANDS
1.3876 ++ $ $0 $@
1.3877 ++
1.3878 ++on `(hostname || uname -n) 2>/dev/null | sed 1q`
1.3879 ++"
1.3880 ++
1.3881 ++_ACEOF
1.3882 ++
1.3883 ++cat >>$CONFIG_STATUS <<_ACEOF
1.3884 ++# Files that config.status was made for.
1.3885 ++config_files="$ac_config_files"
1.3886 ++
1.3887 ++_ACEOF
1.3888 ++
1.3889 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.3890 ++ac_cs_usage="\
1.3891 ++\`$as_me' instantiates files from templates according to the
1.3892 ++current configuration.
1.3893 ++
1.3894 ++Usage: $0 [OPTIONS] [FILE]...
1.3895 ++
1.3896 ++ -h, --help print this help, then exit
1.3897 ++ -V, --version print version number and configuration settings, then exit
1.3898 ++ -q, --quiet do not print progress messages
1.3899 ++ -d, --debug don't remove temporary files
1.3900 ++ --recheck update $as_me by reconfiguring in the same conditions
1.3901 ++ --file=FILE[:TEMPLATE]
1.3902 ++ instantiate the configuration file FILE
1.3903 ++
1.3904 ++Configuration files:
1.3905 ++$config_files
1.3906 ++
1.3907 ++Report bugs to <bug-autoconf@gnu.org>."
1.3908 ++
1.3909 ++_ACEOF
1.3910 ++cat >>$CONFIG_STATUS <<_ACEOF
1.3911 ++ac_cs_version="\\
1.3912 ++newlib config.status NEWLIB_VERSION
1.3913 ++configured by $0, generated by GNU Autoconf 2.61,
1.3914 ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
1.3915 ++
1.3916 ++Copyright (C) 2006 Free Software Foundation, Inc.
1.3917 ++This config.status script is free software; the Free Software Foundation
1.3918 ++gives unlimited permission to copy, distribute and modify it."
1.3919 ++
1.3920 ++ac_pwd='$ac_pwd'
1.3921 ++srcdir='$srcdir'
1.3922 ++INSTALL='$INSTALL'
1.3923 ++_ACEOF
1.3924 ++
1.3925 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.3926 ++# If no file are specified by the user, then we need to provide default
1.3927 ++# value. By we need to know if files were specified by the user.
1.3928 ++ac_need_defaults=:
1.3929 ++while test $# != 0
1.3930 ++do
1.3931 ++ case $1 in
1.3932 ++ --*=*)
1.3933 ++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
1.3934 ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
1.3935 ++ ac_shift=:
1.3936 ++ ;;
1.3937 ++ *)
1.3938 ++ ac_option=$1
1.3939 ++ ac_optarg=$2
1.3940 ++ ac_shift=shift
1.3941 ++ ;;
1.3942 ++ esac
1.3943 ++
1.3944 ++ case $ac_option in
1.3945 ++ # Handling of the options.
1.3946 ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
1.3947 ++ ac_cs_recheck=: ;;
1.3948 ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
1.3949 ++ echo "$ac_cs_version"; exit ;;
1.3950 ++ --debug | --debu | --deb | --de | --d | -d )
1.3951 ++ debug=: ;;
1.3952 ++ --file | --fil | --fi | --f )
1.3953 ++ $ac_shift
1.3954 ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
1.3955 ++ ac_need_defaults=false;;
1.3956 ++ --he | --h | --help | --hel | -h )
1.3957 ++ echo "$ac_cs_usage"; exit ;;
1.3958 ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.3959 ++ | -silent | --silent | --silen | --sile | --sil | --si | --s)
1.3960 ++ ac_cs_silent=: ;;
1.3961 ++
1.3962 ++ # This is an error.
1.3963 ++ -*) { echo "$as_me: error: unrecognized option: $1
1.3964 ++Try \`$0 --help' for more information." >&2
1.3965 ++ { (exit 1); exit 1; }; } ;;
1.3966 ++
1.3967 ++ *) ac_config_targets="$ac_config_targets $1"
1.3968 ++ ac_need_defaults=false ;;
1.3969 ++
1.3970 ++ esac
1.3971 ++ shift
1.3972 ++done
1.3973 ++
1.3974 ++ac_configure_extra_args=
1.3975 ++
1.3976 ++if $ac_cs_silent; then
1.3977 ++ exec 6>/dev/null
1.3978 ++ ac_configure_extra_args="$ac_configure_extra_args --silent"
1.3979 ++fi
1.3980 ++
1.3981 ++_ACEOF
1.3982 ++cat >>$CONFIG_STATUS <<_ACEOF
1.3983 ++if \$ac_cs_recheck; then
1.3984 ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
1.3985 ++ CONFIG_SHELL=$SHELL
1.3986 ++ export CONFIG_SHELL
1.3987 ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
1.3988 ++fi
1.3989 ++
1.3990 ++_ACEOF
1.3991 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.3992 ++exec 5>>config.log
1.3993 ++{
1.3994 ++ echo
1.3995 ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1.3996 ++## Running $as_me. ##
1.3997 ++_ASBOX
1.3998 ++ echo "$ac_log"
1.3999 ++} >&5
1.4000 ++
1.4001 ++_ACEOF
1.4002 ++cat >>$CONFIG_STATUS <<_ACEOF
1.4003 ++_ACEOF
1.4004 ++
1.4005 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.4006 ++
1.4007 ++# Handling of arguments.
1.4008 ++for ac_config_target in $ac_config_targets
1.4009 ++do
1.4010 ++ case $ac_config_target in
1.4011 ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
1.4012 ++
1.4013 ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
1.4014 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
1.4015 ++ { (exit 1); exit 1; }; };;
1.4016 ++ esac
1.4017 ++done
1.4018 ++
1.4019 ++
1.4020 ++# If the user did not use the arguments to specify the items to instantiate,
1.4021 ++# then the envvar interface is used. Set only those that are not.
1.4022 ++# We use the long form for the default assignment because of an extremely
1.4023 ++# bizarre bug on SunOS 4.1.3.
1.4024 ++if $ac_need_defaults; then
1.4025 ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
1.4026 ++fi
1.4027 ++
1.4028 ++# Have a temporary directory for convenience. Make it in the build tree
1.4029 ++# simply because there is no reason against having it here, and in addition,
1.4030 ++# creating and moving files from /tmp can sometimes cause problems.
1.4031 ++# Hook for its removal unless debugging.
1.4032 ++# Note that there is a small window in which the directory will not be cleaned:
1.4033 ++# after its creation but before its name has been assigned to `$tmp'.
1.4034 ++$debug ||
1.4035 ++{
1.4036 ++ tmp=
1.4037 ++ trap 'exit_status=$?
1.4038 ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
1.4039 ++' 0
1.4040 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15
1.4041 ++}
1.4042 ++# Create a (secure) tmp directory for tmp files.
1.4043 ++
1.4044 ++{
1.4045 ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
1.4046 ++ test -n "$tmp" && test -d "$tmp"
1.4047 ++} ||
1.4048 ++{
1.4049 ++ tmp=./conf$$-$RANDOM
1.4050 ++ (umask 077 && mkdir "$tmp")
1.4051 ++} ||
1.4052 ++{
1.4053 ++ echo "$me: cannot create a temporary directory in ." >&2
1.4054 ++ { (exit 1); exit 1; }
1.4055 ++}
1.4056 ++
1.4057 ++#
1.4058 ++# Set up the sed scripts for CONFIG_FILES section.
1.4059 ++#
1.4060 ++
1.4061 ++# No need to generate the scripts if there are no CONFIG_FILES.
1.4062 ++# This happens for instance when ./config.status config.h
1.4063 ++if test -n "$CONFIG_FILES"; then
1.4064 ++
1.4065 ++_ACEOF
1.4066 ++
1.4067 ++
1.4068 ++
1.4069 ++ac_delim='%!_!# '
1.4070 ++for ac_last_try in false false false false false :; do
1.4071 ++ cat >conf$$subs.sed <<_ACEOF
1.4072 ++SHELL!$SHELL$ac_delim
1.4073 ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
1.4074 ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim
1.4075 ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
1.4076 ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
1.4077 ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim
1.4078 ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
1.4079 ++exec_prefix!$exec_prefix$ac_delim
1.4080 ++prefix!$prefix$ac_delim
1.4081 ++program_transform_name!$program_transform_name$ac_delim
1.4082 ++bindir!$bindir$ac_delim
1.4083 ++sbindir!$sbindir$ac_delim
1.4084 ++libexecdir!$libexecdir$ac_delim
1.4085 ++datarootdir!$datarootdir$ac_delim
1.4086 ++datadir!$datadir$ac_delim
1.4087 ++sysconfdir!$sysconfdir$ac_delim
1.4088 ++sharedstatedir!$sharedstatedir$ac_delim
1.4089 ++localstatedir!$localstatedir$ac_delim
1.4090 ++includedir!$includedir$ac_delim
1.4091 ++oldincludedir!$oldincludedir$ac_delim
1.4092 ++docdir!$docdir$ac_delim
1.4093 ++infodir!$infodir$ac_delim
1.4094 ++htmldir!$htmldir$ac_delim
1.4095 ++dvidir!$dvidir$ac_delim
1.4096 ++pdfdir!$pdfdir$ac_delim
1.4097 ++psdir!$psdir$ac_delim
1.4098 ++libdir!$libdir$ac_delim
1.4099 ++localedir!$localedir$ac_delim
1.4100 ++mandir!$mandir$ac_delim
1.4101 ++DEFS!$DEFS$ac_delim
1.4102 ++ECHO_C!$ECHO_C$ac_delim
1.4103 ++ECHO_N!$ECHO_N$ac_delim
1.4104 ++ECHO_T!$ECHO_T$ac_delim
1.4105 ++LIBS!$LIBS$ac_delim
1.4106 ++build_alias!$build_alias$ac_delim
1.4107 ++host_alias!$host_alias$ac_delim
1.4108 ++target_alias!$target_alias$ac_delim
1.4109 ++MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim
1.4110 ++MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim
1.4111 ++newlib_basedir!$newlib_basedir$ac_delim
1.4112 ++build!$build$ac_delim
1.4113 ++build_cpu!$build_cpu$ac_delim
1.4114 ++build_vendor!$build_vendor$ac_delim
1.4115 ++build_os!$build_os$ac_delim
1.4116 ++host!$host$ac_delim
1.4117 ++host_cpu!$host_cpu$ac_delim
1.4118 ++host_vendor!$host_vendor$ac_delim
1.4119 ++host_os!$host_os$ac_delim
1.4120 ++target!$target$ac_delim
1.4121 ++target_cpu!$target_cpu$ac_delim
1.4122 ++target_vendor!$target_vendor$ac_delim
1.4123 ++target_os!$target_os$ac_delim
1.4124 ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
1.4125 ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
1.4126 ++INSTALL_DATA!$INSTALL_DATA$ac_delim
1.4127 ++PACKAGE!$PACKAGE$ac_delim
1.4128 ++VERSION!$VERSION$ac_delim
1.4129 ++ACLOCAL!$ACLOCAL$ac_delim
1.4130 ++AUTOCONF!$AUTOCONF$ac_delim
1.4131 ++AUTOMAKE!$AUTOMAKE$ac_delim
1.4132 ++AUTOHEADER!$AUTOHEADER$ac_delim
1.4133 ++MAKEINFO!$MAKEINFO$ac_delim
1.4134 ++SET_MAKE!$SET_MAKE$ac_delim
1.4135 ++CC!$CC$ac_delim
1.4136 ++AS!$AS$ac_delim
1.4137 ++AR!$AR$ac_delim
1.4138 ++RANLIB!$RANLIB$ac_delim
1.4139 ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
1.4140 ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
1.4141 ++MAINT!$MAINT$ac_delim
1.4142 ++NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim
1.4143 ++LDFLAGS!$LDFLAGS$ac_delim
1.4144 ++ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim
1.4145 ++ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim
1.4146 ++ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim
1.4147 ++ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim
1.4148 ++ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim
1.4149 ++ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim
1.4150 ++ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim
1.4151 ++ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim
1.4152 ++ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim
1.4153 ++ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim
1.4154 ++USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim
1.4155 ++USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim
1.4156 ++OBJEXT!$OBJEXT$ac_delim
1.4157 ++oext!$oext$ac_delim
1.4158 ++aext!$aext$ac_delim
1.4159 ++libm_machine_dir!$libm_machine_dir$ac_delim
1.4160 ++machine_dir!$machine_dir$ac_delim
1.4161 ++sys_dir!$sys_dir$ac_delim
1.4162 ++LIBOBJS!$LIBOBJS$ac_delim
1.4163 ++LTLIBOBJS!$LTLIBOBJS$ac_delim
1.4164 ++_ACEOF
1.4165 ++
1.4166 ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then
1.4167 ++ break
1.4168 ++ elif $ac_last_try; then
1.4169 ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
1.4170 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
1.4171 ++ { (exit 1); exit 1; }; }
1.4172 ++ else
1.4173 ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
1.4174 ++ fi
1.4175 ++done
1.4176 ++
1.4177 ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
1.4178 ++if test -n "$ac_eof"; then
1.4179 ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
1.4180 ++ ac_eof=`expr $ac_eof + 1`
1.4181 ++fi
1.4182 ++
1.4183 ++cat >>$CONFIG_STATUS <<_ACEOF
1.4184 ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
1.4185 ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
1.4186 ++_ACEOF
1.4187 ++sed '
1.4188 ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
1.4189 ++s/^/s,@/; s/!/@,|#_!!_#|/
1.4190 ++:n
1.4191 ++t n
1.4192 ++s/'"$ac_delim"'$/,g/; t
1.4193 ++s/$/\\/; p
1.4194 ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
1.4195 ++' >>$CONFIG_STATUS <conf$$subs.sed
1.4196 ++rm -f conf$$subs.sed
1.4197 ++cat >>$CONFIG_STATUS <<_ACEOF
1.4198 ++:end
1.4199 ++s/|#_!!_#|//g
1.4200 ++CEOF$ac_eof
1.4201 ++_ACEOF
1.4202 ++
1.4203 ++
1.4204 ++# VPATH may cause trouble with some makes, so we remove $(srcdir),
1.4205 ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1.4206 ++# trailing colons and then remove the whole line if VPATH becomes empty
1.4207 ++# (actually we leave an empty line to preserve line numbers).
1.4208 ++if test "x$srcdir" = x.; then
1.4209 ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
1.4210 ++s/:*\$(srcdir):*/:/
1.4211 ++s/:*\${srcdir}:*/:/
1.4212 ++s/:*@srcdir@:*/:/
1.4213 ++s/^\([^=]*=[ ]*\):*/\1/
1.4214 ++s/:*$//
1.4215 ++s/^[^=]*=[ ]*$//
1.4216 ++}'
1.4217 ++fi
1.4218 ++
1.4219 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.4220 ++fi # test -n "$CONFIG_FILES"
1.4221 ++
1.4222 ++
1.4223 ++for ac_tag in :F $CONFIG_FILES
1.4224 ++do
1.4225 ++ case $ac_tag in
1.4226 ++ :[FHLC]) ac_mode=$ac_tag; continue;;
1.4227 ++ esac
1.4228 ++ case $ac_mode$ac_tag in
1.4229 ++ :[FHL]*:*);;
1.4230 ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
1.4231 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;}
1.4232 ++ { (exit 1); exit 1; }; };;
1.4233 ++ :[FH]-) ac_tag=-:-;;
1.4234 ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
1.4235 ++ esac
1.4236 ++ ac_save_IFS=$IFS
1.4237 ++ IFS=:
1.4238 ++ set x $ac_tag
1.4239 ++ IFS=$ac_save_IFS
1.4240 ++ shift
1.4241 ++ ac_file=$1
1.4242 ++ shift
1.4243 ++
1.4244 ++ case $ac_mode in
1.4245 ++ :L) ac_source=$1;;
1.4246 ++ :[FH])
1.4247 ++ ac_file_inputs=
1.4248 ++ for ac_f
1.4249 ++ do
1.4250 ++ case $ac_f in
1.4251 ++ -) ac_f="$tmp/stdin";;
1.4252 ++ *) # Look for the file first in the build tree, then in the source tree
1.4253 ++ # (if the path is not absolute). The absolute path cannot be DOS-style,
1.4254 ++ # because $ac_f cannot contain `:'.
1.4255 ++ test -f "$ac_f" ||
1.4256 ++ case $ac_f in
1.4257 ++ [\\/$]*) false;;
1.4258 ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
1.4259 ++ esac ||
1.4260 ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
1.4261 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;}
1.4262 ++ { (exit 1); exit 1; }; };;
1.4263 ++ esac
1.4264 ++ ac_file_inputs="$ac_file_inputs $ac_f"
1.4265 ++ done
1.4266 ++
1.4267 ++ # Let's still pretend it is `configure' which instantiates (i.e., don't
1.4268 ++ # use $as_me), people would be surprised to read:
1.4269 ++ # /* config.h. Generated by config.status. */
1.4270 ++ configure_input="Generated from "`IFS=:
1.4271 ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
1.4272 ++ if test x"$ac_file" != x-; then
1.4273 ++ configure_input="$ac_file. $configure_input"
1.4274 ++ { echo "$as_me:$LINENO: creating $ac_file" >&5
1.4275 ++echo "$as_me: creating $ac_file" >&6;}
1.4276 ++ fi
1.4277 ++
1.4278 ++ case $ac_tag in
1.4279 ++ *:-:* | *:-) cat >"$tmp/stdin";;
1.4280 ++ esac
1.4281 ++ ;;
1.4282 ++ esac
1.4283 ++
1.4284 ++ ac_dir=`$as_dirname -- "$ac_file" ||
1.4285 ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.4286 ++ X"$ac_file" : 'X\(//\)[^/]' \| \
1.4287 ++ X"$ac_file" : 'X\(//\)$' \| \
1.4288 ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
1.4289 ++echo X"$ac_file" |
1.4290 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.4291 ++ s//\1/
1.4292 ++ q
1.4293 ++ }
1.4294 ++ /^X\(\/\/\)[^/].*/{
1.4295 ++ s//\1/
1.4296 ++ q
1.4297 ++ }
1.4298 ++ /^X\(\/\/\)$/{
1.4299 ++ s//\1/
1.4300 ++ q
1.4301 ++ }
1.4302 ++ /^X\(\/\).*/{
1.4303 ++ s//\1/
1.4304 ++ q
1.4305 ++ }
1.4306 ++ s/.*/./; q'`
1.4307 ++ { as_dir="$ac_dir"
1.4308 ++ case $as_dir in #(
1.4309 ++ -*) as_dir=./$as_dir;;
1.4310 ++ esac
1.4311 ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
1.4312 ++ as_dirs=
1.4313 ++ while :; do
1.4314 ++ case $as_dir in #(
1.4315 ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
1.4316 ++ *) as_qdir=$as_dir;;
1.4317 ++ esac
1.4318 ++ as_dirs="'$as_qdir' $as_dirs"
1.4319 ++ as_dir=`$as_dirname -- "$as_dir" ||
1.4320 ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.4321 ++ X"$as_dir" : 'X\(//\)[^/]' \| \
1.4322 ++ X"$as_dir" : 'X\(//\)$' \| \
1.4323 ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
1.4324 ++echo X"$as_dir" |
1.4325 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.4326 ++ s//\1/
1.4327 ++ q
1.4328 ++ }
1.4329 ++ /^X\(\/\/\)[^/].*/{
1.4330 ++ s//\1/
1.4331 ++ q
1.4332 ++ }
1.4333 ++ /^X\(\/\/\)$/{
1.4334 ++ s//\1/
1.4335 ++ q
1.4336 ++ }
1.4337 ++ /^X\(\/\).*/{
1.4338 ++ s//\1/
1.4339 ++ q
1.4340 ++ }
1.4341 ++ s/.*/./; q'`
1.4342 ++ test -d "$as_dir" && break
1.4343 ++ done
1.4344 ++ test -z "$as_dirs" || eval "mkdir $as_dirs"
1.4345 ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
1.4346 ++echo "$as_me: error: cannot create directory $as_dir" >&2;}
1.4347 ++ { (exit 1); exit 1; }; }; }
1.4348 ++ ac_builddir=.
1.4349 ++
1.4350 ++case "$ac_dir" in
1.4351 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.4352 ++*)
1.4353 ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.4354 ++ # A ".." for each directory in $ac_dir_suffix.
1.4355 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.4356 ++ case $ac_top_builddir_sub in
1.4357 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.4358 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.4359 ++ esac ;;
1.4360 ++esac
1.4361 ++ac_abs_top_builddir=$ac_pwd
1.4362 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.4363 ++# for backward compatibility:
1.4364 ++ac_top_builddir=$ac_top_build_prefix
1.4365 ++
1.4366 ++case $srcdir in
1.4367 ++ .) # We are building in place.
1.4368 ++ ac_srcdir=.
1.4369 ++ ac_top_srcdir=$ac_top_builddir_sub
1.4370 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.4371 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.4372 ++ ac_srcdir=$srcdir$ac_dir_suffix;
1.4373 ++ ac_top_srcdir=$srcdir
1.4374 ++ ac_abs_top_srcdir=$srcdir ;;
1.4375 ++ *) # Relative name.
1.4376 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.4377 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.4378 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.4379 ++esac
1.4380 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.4381 ++
1.4382 ++
1.4383 ++ case $ac_mode in
1.4384 ++ :F)
1.4385 ++ #
1.4386 ++ # CONFIG_FILE
1.4387 ++ #
1.4388 ++
1.4389 ++ case $INSTALL in
1.4390 ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
1.4391 ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
1.4392 ++ esac
1.4393 ++_ACEOF
1.4394 ++
1.4395 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.4396 ++# If the template does not know about datarootdir, expand it.
1.4397 ++# FIXME: This hack should be removed a few years after 2.60.
1.4398 ++ac_datarootdir_hack=; ac_datarootdir_seen=
1.4399 ++
1.4400 ++case `sed -n '/datarootdir/ {
1.4401 ++ p
1.4402 ++ q
1.4403 ++}
1.4404 ++/@datadir@/p
1.4405 ++/@docdir@/p
1.4406 ++/@infodir@/p
1.4407 ++/@localedir@/p
1.4408 ++/@mandir@/p
1.4409 ++' $ac_file_inputs` in
1.4410 ++*datarootdir*) ac_datarootdir_seen=yes;;
1.4411 ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
1.4412 ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
1.4413 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
1.4414 ++_ACEOF
1.4415 ++cat >>$CONFIG_STATUS <<_ACEOF
1.4416 ++ ac_datarootdir_hack='
1.4417 ++ s&@datadir@&$datadir&g
1.4418 ++ s&@docdir@&$docdir&g
1.4419 ++ s&@infodir@&$infodir&g
1.4420 ++ s&@localedir@&$localedir&g
1.4421 ++ s&@mandir@&$mandir&g
1.4422 ++ s&\\\${datarootdir}&$datarootdir&g' ;;
1.4423 ++esac
1.4424 ++_ACEOF
1.4425 ++
1.4426 ++# Neutralize VPATH when `$srcdir' = `.'.
1.4427 ++# Shell code in configure.ac might set extrasub.
1.4428 ++# FIXME: do we really want to maintain this feature?
1.4429 ++cat >>$CONFIG_STATUS <<_ACEOF
1.4430 ++ sed "$ac_vpsub
1.4431 ++$extrasub
1.4432 ++_ACEOF
1.4433 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.4434 ++:t
1.4435 ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
1.4436 ++s&@configure_input@&$configure_input&;t t
1.4437 ++s&@top_builddir@&$ac_top_builddir_sub&;t t
1.4438 ++s&@srcdir@&$ac_srcdir&;t t
1.4439 ++s&@abs_srcdir@&$ac_abs_srcdir&;t t
1.4440 ++s&@top_srcdir@&$ac_top_srcdir&;t t
1.4441 ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
1.4442 ++s&@builddir@&$ac_builddir&;t t
1.4443 ++s&@abs_builddir@&$ac_abs_builddir&;t t
1.4444 ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
1.4445 ++s&@INSTALL@&$ac_INSTALL&;t t
1.4446 ++$ac_datarootdir_hack
1.4447 ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
1.4448 ++
1.4449 ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
1.4450 ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
1.4451 ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
1.4452 ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
1.4453 ++which seems to be undefined. Please make sure it is defined." >&5
1.4454 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
1.4455 ++which seems to be undefined. Please make sure it is defined." >&2;}
1.4456 ++
1.4457 ++ rm -f "$tmp/stdin"
1.4458 ++ case $ac_file in
1.4459 ++ -) cat "$tmp/out"; rm -f "$tmp/out";;
1.4460 ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
1.4461 ++ esac
1.4462 ++ ;;
1.4463 ++
1.4464 ++
1.4465 ++
1.4466 ++ esac
1.4467 ++
1.4468 ++done # for ac_tag
1.4469 ++
1.4470 ++
1.4471 ++{ (exit 0); exit 0; }
1.4472 ++_ACEOF
1.4473 ++chmod +x $CONFIG_STATUS
1.4474 ++ac_clean_files=$ac_clean_files_save
1.4475 ++
1.4476 ++
1.4477 ++# configure is writing to config.log, and then calls config.status.
1.4478 ++# config.status does its own redirection, appending to config.log.
1.4479 ++# Unfortunately, on DOS this fails, as config.log is still kept open
1.4480 ++# by configure, so config.status won't be able to write to it; its
1.4481 ++# output is simply discarded. So we exec the FD to /dev/null,
1.4482 ++# effectively closing config.log, so it can be properly (re)opened and
1.4483 ++# appended to by config.status. When coming back to configure, we
1.4484 ++# need to make the FD available again.
1.4485 ++if test "$no_create" != yes; then
1.4486 ++ ac_cs_success=:
1.4487 ++ ac_config_status_args=
1.4488 ++ test "$silent" = yes &&
1.4489 ++ ac_config_status_args="$ac_config_status_args --quiet"
1.4490 ++ exec 5>/dev/null
1.4491 ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
1.4492 ++ exec 5>>config.log
1.4493 ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
1.4494 ++ # would make configure fail if this is the last instruction.
1.4495 ++ $ac_cs_success || { (exit 1); exit 1; }
1.4496 ++fi
1.4497 ++
1.4498 +diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure.in newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in
1.4499 +--- newlib-1.17.0/newlib/libc/machine/avr32/configure.in 1970-01-01 01:00:00.000000000 +0100
1.4500 ++++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in 2009-05-22 09:57:50.000000000 +0200
1.4501 +@@ -0,0 +1,14 @@
1.4502 ++dnl This is the newlib/libc/machine/arm configure.in file.
1.4503 ++dnl Process this file with autoconf to produce a configure script.
1.4504 ++
1.4505 ++AC_PREREQ(2.59)
1.4506 ++AC_INIT([newlib],[NEWLIB_VERSION])
1.4507 ++AC_CONFIG_SRCDIR([Makefile.am])
1.4508 ++
1.4509 ++dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake.
1.4510 ++AC_CONFIG_AUX_DIR(../../../..)
1.4511 ++
1.4512 ++NEWLIB_CONFIGURE(../../..)
1.4513 ++
1.4514 ++AC_CONFIG_FILES([Makefile])
1.4515 ++AC_OUTPUT
1.4516 +diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am
1.4517 +--- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am 1970-01-01 01:00:00.000000000 +0100
1.4518 ++++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am 2009-05-22 09:57:50.000000000 +0200
1.4519 +@@ -0,0 +1,16 @@
1.4520 ++## Process this file with automake to generate Makefile.in
1.4521 ++
1.4522 ++AUTOMAKE_OPTIONS = cygnus
1.4523 ++
1.4524 ++INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
1.4525 ++
1.4526 ++AM_CCASFLAGS = $(INCLUDES)
1.4527 ++
1.4528 ++noinst_LIBRARIES = lib.a
1.4529 ++
1.4530 ++lib_a_SOURCES = strcmp.S strncpy.S memcpy.S
1.4531 ++lib_a_CCASFLAGS=$(AM_CCASFLAGS)
1.4532 ++lib_a_CFLAGS = $(AM_CFLAGS)
1.4533 ++
1.4534 ++ACLOCAL_AMFLAGS = -I ../../..
1.4535 ++CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
1.4536 +diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in
1.4537 +--- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in 1970-01-01 01:00:00.000000000 +0100
1.4538 ++++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in 2009-05-22 09:57:50.000000000 +0200
1.4539 +@@ -0,0 +1,327 @@
1.4540 ++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
1.4541 ++
1.4542 ++# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
1.4543 ++# This Makefile.in is free software; the Free Software Foundation
1.4544 ++# gives unlimited permission to copy and/or distribute it,
1.4545 ++# with or without modifications, as long as this notice is preserved.
1.4546 ++
1.4547 ++# This program is distributed in the hope that it will be useful,
1.4548 ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
1.4549 ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
1.4550 ++# PARTICULAR PURPOSE.
1.4551 ++
1.4552 ++
1.4553 ++SHELL = @SHELL@
1.4554 ++
1.4555 ++srcdir = @srcdir@
1.4556 ++top_srcdir = @top_srcdir@
1.4557 ++VPATH = @srcdir@
1.4558 ++prefix = @prefix@
1.4559 ++exec_prefix = @exec_prefix@
1.4560 ++
1.4561 ++bindir = @bindir@
1.4562 ++sbindir = @sbindir@
1.4563 ++libexecdir = @libexecdir@
1.4564 ++datadir = @datadir@
1.4565 ++sysconfdir = @sysconfdir@
1.4566 ++sharedstatedir = @sharedstatedir@
1.4567 ++localstatedir = @localstatedir@
1.4568 ++libdir = @libdir@
1.4569 ++infodir = @infodir@
1.4570 ++mandir = @mandir@
1.4571 ++includedir = @includedir@
1.4572 ++oldincludedir = /usr/include
1.4573 ++
1.4574 ++DESTDIR =
1.4575 ++
1.4576 ++pkgdatadir = $(datadir)/@PACKAGE@
1.4577 ++pkglibdir = $(libdir)/@PACKAGE@
1.4578 ++pkgincludedir = $(includedir)/@PACKAGE@
1.4579 ++
1.4580 ++top_builddir = .
1.4581 ++
1.4582 ++ACLOCAL = @ACLOCAL@
1.4583 ++AUTOCONF = @AUTOCONF@
1.4584 ++AUTOMAKE = @AUTOMAKE@
1.4585 ++AUTOHEADER = @AUTOHEADER@
1.4586 ++
1.4587 ++INSTALL = @INSTALL@
1.4588 ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
1.4589 ++INSTALL_DATA = @INSTALL_DATA@
1.4590 ++INSTALL_SCRIPT = @INSTALL_SCRIPT@
1.4591 ++transform = @program_transform_name@
1.4592 ++
1.4593 ++NORMAL_INSTALL = :
1.4594 ++PRE_INSTALL = :
1.4595 ++POST_INSTALL = :
1.4596 ++NORMAL_UNINSTALL = :
1.4597 ++PRE_UNINSTALL = :
1.4598 ++POST_UNINSTALL = :
1.4599 ++build_alias = @build_alias@
1.4600 ++build_triplet = @build@
1.4601 ++host_alias = @host_alias@
1.4602 ++host_triplet = @host@
1.4603 ++target_alias = @target_alias@
1.4604 ++target_triplet = @target@
1.4605 ++AR = @AR@
1.4606 ++AS = @AS@
1.4607 ++CC = @CC@
1.4608 ++CPP = @CPP@
1.4609 ++EXEEXT = @EXEEXT@
1.4610 ++LDFLAGS = @LDFLAGS@
1.4611 ++MAINT = @MAINT@
1.4612 ++MAKEINFO = @MAKEINFO@
1.4613 ++NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
1.4614 ++OBJEXT = @OBJEXT@
1.4615 ++PACKAGE = @PACKAGE@
1.4616 ++RANLIB = @RANLIB@
1.4617 ++VERSION = @VERSION@
1.4618 ++aext = @aext@
1.4619 ++libm_machine_dir = @libm_machine_dir@
1.4620 ++machine_dir = @machine_dir@
1.4621 ++newlib_basedir = @newlib_basedir@
1.4622 ++oext = @oext@
1.4623 ++sys_dir = @sys_dir@
1.4624 ++
1.4625 ++AUTOMAKE_OPTIONS = cygnus
1.4626 ++
1.4627 ++INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
1.4628 ++
1.4629 ++noinst_LIBRARIES = lib.a
1.4630 ++
1.4631 ++lib_a_SOURCES = strcmp.S strncpy.S memcpy.S
1.4632 ++
1.4633 ++ACLOCAL_AMFLAGS = -I ../../..
1.4634 ++CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
1.4635 ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
1.4636 ++mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
1.4637 ++CONFIG_CLEAN_FILES =
1.4638 ++LIBRARIES = $(noinst_LIBRARIES)
1.4639 ++
1.4640 ++
1.4641 ++DEFS = @DEFS@ -I. -I$(srcdir)
1.4642 ++CPPFLAGS =
1.4643 ++LIBS = @LIBS@
1.4644 ++lib_a_LIBADD =
1.4645 ++lib_a_OBJECTS = strcmp.o strncpy.o memcpy.o
1.4646 ++CFLAGS = @CFLAGS@
1.4647 ++COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
1.4648 ++CCLD = $(CC)
1.4649 ++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
1.4650 ++DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in
1.4651 ++
1.4652 ++
1.4653 ++DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
1.4654 ++
1.4655 ++TAR = gtar
1.4656 ++GZIP_ENV = --best
1.4657 ++SOURCES = $(lib_a_SOURCES)
1.4658 ++OBJECTS = $(lib_a_OBJECTS)
1.4659 ++
1.4660 ++all: all-redirect
1.4661 ++.SUFFIXES:
1.4662 ++.SUFFIXES: .S .c .o .s
1.4663 ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
1.4664 ++ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
1.4665 ++
1.4666 ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
1.4667 ++ cd $(top_builddir) \
1.4668 ++ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
1.4669 ++
1.4670 ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \
1.4671 ++ ../../../acinclude.m4 ../../../aclocal.m4 \
1.4672 ++ ../../../libtool.m4
1.4673 ++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
1.4674 ++
1.4675 ++config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
1.4676 ++ $(SHELL) ./config.status --recheck
1.4677 ++$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
1.4678 ++ cd $(srcdir) && $(AUTOCONF)
1.4679 ++
1.4680 ++mostlyclean-noinstLIBRARIES:
1.4681 ++
1.4682 ++clean-noinstLIBRARIES:
1.4683 ++ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
1.4684 ++
1.4685 ++distclean-noinstLIBRARIES:
1.4686 ++
1.4687 ++maintainer-clean-noinstLIBRARIES:
1.4688 ++
1.4689 ++.c.o:
1.4690 ++ $(COMPILE) -c $<
1.4691 ++
1.4692 ++.s.o:
1.4693 ++ $(COMPILE) -c $<
1.4694 ++
1.4695 ++.S.o:
1.4696 ++ $(COMPILE) -c $<
1.4697 ++
1.4698 ++mostlyclean-compile:
1.4699 ++ -rm -f *.o core *.core
1.4700 ++
1.4701 ++clean-compile:
1.4702 ++
1.4703 ++distclean-compile:
1.4704 ++ -rm -f *.tab.c
1.4705 ++
1.4706 ++maintainer-clean-compile:
1.4707 ++
1.4708 ++lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
1.4709 ++ -rm -f lib.a
1.4710 ++ $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
1.4711 ++ $(RANLIB) lib.a
1.4712 ++
1.4713 ++tags: TAGS
1.4714 ++
1.4715 ++ID: $(HEADERS) $(SOURCES) $(LISP)
1.4716 ++ list='$(SOURCES) $(HEADERS)'; \
1.4717 ++ unique=`for i in $$list; do echo $$i; done | \
1.4718 ++ awk ' { files[$$0] = 1; } \
1.4719 ++ END { for (i in files) print i; }'`; \
1.4720 ++ here=`pwd` && cd $(srcdir) \
1.4721 ++ && mkid -f$$here/ID $$unique $(LISP)
1.4722 ++
1.4723 ++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
1.4724 ++ tags=; \
1.4725 ++ here=`pwd`; \
1.4726 ++ list='$(SOURCES) $(HEADERS)'; \
1.4727 ++ unique=`for i in $$list; do echo $$i; done | \
1.4728 ++ awk ' { files[$$0] = 1; } \
1.4729 ++ END { for (i in files) print i; }'`; \
1.4730 ++ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
1.4731 ++ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
1.4732 ++
1.4733 ++mostlyclean-tags:
1.4734 ++
1.4735 ++clean-tags:
1.4736 ++
1.4737 ++distclean-tags:
1.4738 ++ -rm -f TAGS ID
1.4739 ++
1.4740 ++maintainer-clean-tags:
1.4741 ++
1.4742 ++distdir = $(PACKAGE)-$(VERSION)
1.4743 ++top_distdir = $(distdir)
1.4744 ++
1.4745 ++# This target untars the dist file and tries a VPATH configuration. Then
1.4746 ++# it guarantees that the distribution is self-contained by making another
1.4747 ++# tarfile.
1.4748 ++distcheck: dist
1.4749 ++ -rm -rf $(distdir)
1.4750 ++ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
1.4751 ++ mkdir $(distdir)/=build
1.4752 ++ mkdir $(distdir)/=inst
1.4753 ++ dc_install_base=`cd $(distdir)/=inst && pwd`; \
1.4754 ++ cd $(distdir)/=build \
1.4755 ++ && ../configure --srcdir=.. --prefix=$$dc_install_base \
1.4756 ++ && $(MAKE) $(AM_MAKEFLAGS) \
1.4757 ++ && $(MAKE) $(AM_MAKEFLAGS) dvi \
1.4758 ++ && $(MAKE) $(AM_MAKEFLAGS) check \
1.4759 ++ && $(MAKE) $(AM_MAKEFLAGS) install \
1.4760 ++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1.4761 ++ && $(MAKE) $(AM_MAKEFLAGS) dist
1.4762 ++ -rm -rf $(distdir)
1.4763 ++ @banner="$(distdir).tar.gz is ready for distribution"; \
1.4764 ++ dashes=`echo "$$banner" | sed s/./=/g`; \
1.4765 ++ echo "$$dashes"; \
1.4766 ++ echo "$$banner"; \
1.4767 ++ echo "$$dashes"
1.4768 ++dist: distdir
1.4769 ++ -chmod -R a+r $(distdir)
1.4770 ++ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
1.4771 ++ -rm -rf $(distdir)
1.4772 ++dist-all: distdir
1.4773 ++ -chmod -R a+r $(distdir)
1.4774 ++ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
1.4775 ++ -rm -rf $(distdir)
1.4776 ++distdir: $(DISTFILES)
1.4777 ++ -rm -rf $(distdir)
1.4778 ++ mkdir $(distdir)
1.4779 ++ -chmod 777 $(distdir)
1.4780 ++ @for file in $(DISTFILES); do \
1.4781 ++ if test -f $$file; then d=.; else d=$(srcdir); fi; \
1.4782 ++ if test -d $$d/$$file; then \
1.4783 ++ cp -pr $$d/$$file $(distdir)/$$file; \
1.4784 ++ else \
1.4785 ++ test -f $(distdir)/$$file \
1.4786 ++ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
1.4787 ++ || cp -p $$d/$$file $(distdir)/$$file || :; \
1.4788 ++ fi; \
1.4789 ++ done
1.4790 ++info-am:
1.4791 ++info: info-am
1.4792 ++dvi-am:
1.4793 ++dvi: dvi-am
1.4794 ++check-am:
1.4795 ++check: check-am
1.4796 ++installcheck-am:
1.4797 ++installcheck: installcheck-am
1.4798 ++install-info-am:
1.4799 ++install-info: install-info-am
1.4800 ++install-exec-am:
1.4801 ++install-exec: install-exec-am
1.4802 ++
1.4803 ++install-data-am:
1.4804 ++install-data: install-data-am
1.4805 ++
1.4806 ++install-am: all-am
1.4807 ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1.4808 ++install: install-am
1.4809 ++uninstall-am:
1.4810 ++uninstall: uninstall-am
1.4811 ++all-am: Makefile $(LIBRARIES)
1.4812 ++all-redirect: all-am
1.4813 ++install-strip:
1.4814 ++ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
1.4815 ++installdirs:
1.4816 ++
1.4817 ++
1.4818 ++mostlyclean-generic:
1.4819 ++
1.4820 ++clean-generic:
1.4821 ++
1.4822 ++distclean-generic:
1.4823 ++ -rm -f Makefile $(CONFIG_CLEAN_FILES)
1.4824 ++ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
1.4825 ++
1.4826 ++maintainer-clean-generic:
1.4827 ++mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
1.4828 ++ mostlyclean-tags mostlyclean-generic
1.4829 ++
1.4830 ++mostlyclean: mostlyclean-am
1.4831 ++
1.4832 ++clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
1.4833 ++ mostlyclean-am
1.4834 ++
1.4835 ++clean: clean-am
1.4836 ++
1.4837 ++distclean-am: distclean-noinstLIBRARIES distclean-compile \
1.4838 ++ distclean-tags distclean-generic clean-am
1.4839 ++
1.4840 ++distclean: distclean-am
1.4841 ++ -rm -f config.status
1.4842 ++
1.4843 ++maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
1.4844 ++ maintainer-clean-compile maintainer-clean-tags \
1.4845 ++ maintainer-clean-generic distclean-am
1.4846 ++ @echo "This command is intended for maintainers to use;"
1.4847 ++ @echo "it deletes files that may require special tools to rebuild."
1.4848 ++
1.4849 ++maintainer-clean: maintainer-clean-am
1.4850 ++ -rm -f config.status
1.4851 ++
1.4852 ++.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
1.4853 ++clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
1.4854 ++mostlyclean-compile distclean-compile clean-compile \
1.4855 ++maintainer-clean-compile tags mostlyclean-tags distclean-tags \
1.4856 ++clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
1.4857 ++check-am installcheck-am installcheck install-info-am install-info \
1.4858 ++install-exec-am install-exec install-data-am install-data install-am \
1.4859 ++install uninstall-am uninstall all-redirect all-am all installdirs \
1.4860 ++mostlyclean-generic distclean-generic clean-generic \
1.4861 ++maintainer-clean-generic clean mostlyclean distclean maintainer-clean
1.4862 ++
1.4863 ++
1.4864 ++# Tell versions [3.59,3.63) of GNU make to not export all variables.
1.4865 ++# Otherwise a system limit (for SysV at least) may be exceeded.
1.4866 ++.NOEXPORT:
1.4867 +diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S
1.4868 +--- newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S 1970-01-01 01:00:00.000000000 +0100
1.4869 ++++ newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S 2009-05-22 09:57:50.000000000 +0200
1.4870 +@@ -0,0 +1,269 @@
1.4871 ++/*
1.4872 ++ * Copyright (C) 2004 Atmel Norway
1.4873 ++ */
1.4874 ++
1.4875 ++/* Don't use r12 as dst since we must return it unmodified */
1.4876 ++
1.4877 ++ .text
1.4878 ++ .global memcpy
1.4879 ++ .type memcpy, @function
1.4880 ++#if defined(__AVR32_HAS_UNALIGNED_WORD__)
1.4881 ++memcpy:
1.4882 ++ /* Check if src and dst are aligned
1.4883 ++ if not do a word based copying. */
1.4884 ++ or r9, r12, r11
1.4885 ++ andl r9, 3, COH
1.4886 ++ brne .Lunaligned_copy
1.4887 ++
1.4888 ++ pushm r12, lr
1.4889 ++ sub r10, 8
1.4890 ++ brmi .Lword_copy
1.4891 ++
1.4892 ++0:
1.4893 ++ ld.d r8, r11++
1.4894 ++ sub r10, 8
1.4895 ++ st.d r12++, r8
1.4896 ++ brpl 0b
1.4897 ++
1.4898 ++.Lword_copy:
1.4899 ++ sub r10, -4
1.4900 ++ brmi .Lbyte_copy
1.4901 ++
1.4902 ++0:
1.4903 ++ ld.w r8, r11++
1.4904 ++ sub r10, 4
1.4905 ++ st.w r12++, r8
1.4906 ++ brpl 0b
1.4907 ++
1.4908 ++.Lbyte_copy:
1.4909 ++ sub r10, -4
1.4910 ++ breq 2f
1.4911 ++1:
1.4912 ++ ld.ub r8, r11++
1.4913 ++ sub r10, 1
1.4914 ++ st.b r12++, r8
1.4915 ++ brne 1b
1.4916 ++2:
1.4917 ++ popm r12, pc
1.4918 ++
1.4919 ++.Lunaligned_copy:
1.4920 ++ mov r9, r12
1.4921 ++ sub r10, 4
1.4922 ++
1.4923 ++ brmi .Lbyte_copy2
1.4924 ++
1.4925 ++0:
1.4926 ++ ld.w r8, r11++
1.4927 ++ sub r10, 4
1.4928 ++ st.w r12++, r8
1.4929 ++ brpl 0b
1.4930 ++
1.4931 ++.Lbyte_copy2:
1.4932 ++ sub r10, -4
1.4933 ++ reteq r9
1.4934 ++1:
1.4935 ++ ld.ub r8, r11++
1.4936 ++ sub r10, 1
1.4937 ++ st.b r12++, r8
1.4938 ++ brne 1b
1.4939 ++
1.4940 ++ ret r9
1.4941 ++
1.4942 ++
1.4943 ++#else
1.4944 ++
1.4945 ++#define dst r9
1.4946 ++#define src r11
1.4947 ++#define len r10
1.4948 ++
1.4949 ++#if defined(__AVR32_UC__)
1.4950 ++memcpy:
1.4951 ++ /* If we have less than 8 bytes, don't do anything fancy
1.4952 ++ just an unrolled byte copy */
1.4953 ++ cp.w r10, 8
1.4954 ++ brlt .Lless_than_8
1.4955 ++ /* Check if src and dst are aligned. */
1.4956 ++ or r9, r12, r11
1.4957 ++ andl r9, 3, COH
1.4958 ++ brne .Lunaligned_copy
1.4959 ++
1.4960 ++ /* Check if larger than 31 */
1.4961 ++ cp.w r10, 32
1.4962 ++ brge .Lmore_than_31:
1.4963 ++
1.4964 ++ /* Less than 32. */
1.4965 ++ asr r8, r10, 2
1.4966 ++ rsub r9, r8, 8
1.4967 ++ add pc, pc, r9 << 2
1.4968 ++ .irp offset,0,1,2,3,4,5,6
1.4969 ++ ld.w r9, r11[(6-\offset)*4]
1.4970 ++ st.w r12[(6-\offset)*4], r9
1.4971 ++ .endr
1.4972 ++
1.4973 ++ add r11, r11, r8 << 2
1.4974 ++ add r8, r12, r8 << 2
1.4975 ++ andl r10, 0x3
1.4976 ++ rsub r10, r10, 4
1.4977 ++ add pc, pc, r10 << 2
1.4978 ++ .irp offset,0,1,2
1.4979 ++ ld.ub r9, r11[2-\offset]
1.4980 ++ st.b r8[2-\offset], r9
1.4981 ++ .endr
1.4982 ++
1.4983 ++ retal r12
1.4984 ++
1.4985 ++.Lless_than_8:
1.4986 ++ rsub r10, r10, 9
1.4987 ++ add pc, pc, r10 << 2
1.4988 ++ .irp offset,0,1,2,3,4,5,6,7
1.4989 ++ ld.ub r9, r11[7-\offset]
1.4990 ++ st.b r12[7-\offset], r9
1.4991 ++ .endr
1.4992 ++
1.4993 ++ retal r12
1.4994 ++
1.4995 ++.Lmore_than_31:
1.4996 ++ stm --sp, r6-r7, lr
1.4997 ++ mov r9, r12
1.4998 ++
1.4999 ++.Laligned_copy:
1.5000 ++ sub r10, 32
1.5001 ++
1.5002 ++1: /* Copy 32 bytes at a time */
1.5003 ++ ld.d r6, r11++
1.5004 ++ st.d r9++, r6
1.5005 ++ ld.d r6, r11++
1.5006 ++ st.d r9++, r6
1.5007 ++ ld.d r6, r11++
1.5008 ++ st.d r9++, r6
1.5009 ++ ld.d r6, r11++
1.5010 ++ st.d r9++, r6
1.5011 ++ sub r10, 32
1.5012 ++ brge 1b
1.5013 ++
1.5014 ++.Lless_than_32:
1.5015 ++ /* Copy 16 more bytes if possible */
1.5016 ++ sub r10, -16
1.5017 ++ brlt .Lless_than_16
1.5018 ++ ld.d r6, r11++
1.5019 ++ st.d r9++, r6
1.5020 ++ ld.d r6, r11++
1.5021 ++ st.d r9++, r6
1.5022 ++ sub r10, 16
1.5023 ++
1.5024 ++.Lless_than_16:
1.5025 ++
1.5026 ++ /* Do the remaining as byte copies */
1.5027 ++ neg r10
1.5028 ++ add pc, pc, r10 << 3
1.5029 ++ nop
1.5030 ++ nop
1.5031 ++ .irp offset,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
1.5032 ++ ld.ub r6, r11[14-\offset],e
1.5033 ++ st.b r9[14-\offset], r6,e
1.5034 ++ .endr
1.5035 ++
1.5036 ++ ldm sp++, r6-r7, pc
1.5037 ++
1.5038 ++.Lunaligned_copy:
1.5039 ++ /* src and dst are unaligned. */
1.5040 ++0:
1.5041 ++ sub r10, 1
1.5042 ++ ld.ub r9, r11[r10]
1.5043 ++ st.b r12[r10], r9
1.5044 ++ brne 0b
1.5045 ++
1.5046 ++ retal r12
1.5047 ++ .size memcpy, . - memcpy
1.5048 ++
1.5049 ++#else
1.5050 ++memcpy:
1.5051 ++ pref src[0]
1.5052 ++ mov dst, r12
1.5053 ++
1.5054 ++ /* If we have less than 32 bytes, don't do anything fancy */
1.5055 ++ cp.w len, 32
1.5056 ++ brge .Lmore_than_31
1.5057 ++
1.5058 ++ sub len, 1
1.5059 ++ retlt r12
1.5060 ++1: ld.ub r8, src++
1.5061 ++ st.b r12, r8
1.5062 ++ sub len, 1
1.5063 ++ brge 1b
1.5064 ++ retal r12
1.5065 ++
1.5066 ++.Lmore_than_31:
1.5067 ++ pushm r0-r7, lr
1.5068 ++
1.5069 ++ /* Check alignment */
1.5070 ++ mov r8, src
1.5071 ++ andl r8, 31, COH
1.5072 ++ brne .Lunaligned_src
1.5073 ++ mov r8, dst
1.5074 ++ andl r8, 3, COH
1.5075 ++ brne .Lunaligned_dst
1.5076 ++
1.5077 ++.Laligned_copy:
1.5078 ++ sub len, 32
1.5079 ++ brlt .Lless_than_32
1.5080 ++
1.5081 ++1: /* Copy 32 bytes at a time */
1.5082 ++ pref src[32]
1.5083 ++ ldm src, r0-r7
1.5084 ++ sub src, -32
1.5085 ++ stm dst, r0-r7
1.5086 ++ sub dst, -32
1.5087 ++ sub len, 32
1.5088 ++ brge 1b
1.5089 ++
1.5090 ++.Lless_than_32:
1.5091 ++ /* Copy 16 more bytes if possible */
1.5092 ++ sub len, -16
1.5093 ++ brlt .Lless_than_16
1.5094 ++ ldm src, r0-r3
1.5095 ++ sub src, -16
1.5096 ++ sub len, 16
1.5097 ++ stm dst, r0-r3
1.5098 ++ sub dst, -16
1.5099 ++
1.5100 ++.Lless_than_16:
1.5101 ++ /* Do the remaining as byte copies */
1.5102 ++ neg len
1.5103 ++ add pc, pc, len << 2
1.5104 ++ .rept 15
1.5105 ++ ld.ub r0, src++
1.5106 ++ st.b dst++, r0
1.5107 ++ .endr
1.5108 ++
1.5109 ++ popm r0-r7, pc
1.5110 ++
1.5111 ++.Lunaligned_src:
1.5112 ++ /* Make src cacheline-aligned. r8 = (src & 31) */
1.5113 ++ rsub r8, r8, 32
1.5114 ++ sub len, r8
1.5115 ++1: ld.ub r0, src++
1.5116 ++ st.b dst++, r0
1.5117 ++ sub r8, 1
1.5118 ++ brne 1b
1.5119 ++
1.5120 ++ /* If dst is word-aligned, we're ready to go */
1.5121 ++ pref src[0]
1.5122 ++ mov r8, 3
1.5123 ++ tst dst, r8
1.5124 ++ breq .Laligned_copy
1.5125 ++
1.5126 ++.Lunaligned_dst:
1.5127 ++ /* src is aligned, but dst is not. Expect bad performance */
1.5128 ++0:
1.5129 ++ ld.ub r0, src++
1.5130 ++ st.b dst++, r0
1.5131 ++ sub len, 1
1.5132 ++ brne 0b
1.5133 ++
1.5134 ++ popm r0-r7, pc
1.5135 ++ .size memcpy, . - memcpy
1.5136 ++
1.5137 ++
1.5138 ++#endif
1.5139 ++#endif
1.5140 +diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S
1.5141 +--- newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S 1970-01-01 01:00:00.000000000 +0100
1.5142 ++++ newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S 2009-05-22 09:57:50.000000000 +0200
1.5143 +@@ -0,0 +1,133 @@
1.5144 ++ .align 2
1.5145 ++ .global strcmp
1.5146 ++
1.5147 ++strcmp:
1.5148 ++#if !defined(__AVR32_HAS_UNALIGNED_WORD__)
1.5149 ++#ifdef __AVR32_UC__
1.5150 ++ /* Check if both strings are aligned. */
1.5151 ++ or r10, r12, r11
1.5152 ++ andl r10, 3, COH
1.5153 ++ brne .Lbyte_strcmp
1.5154 ++0:
1.5155 ++ ld.w r10, r12[0]
1.5156 ++ ld.w r9, r11[0]
1.5157 ++ tnbz r10
1.5158 ++ breq 1f
1.5159 ++ cp.w r10, r9
1.5160 ++ brne 1f
1.5161 ++ ld.w r10, r12[4]
1.5162 ++ ld.w r9, r11[4]
1.5163 ++ tnbz r10
1.5164 ++ breq 1f
1.5165 ++ cp.w r10, r9
1.5166 ++ brne 1f
1.5167 ++ ld.w r10, r12[8]
1.5168 ++ ld.w r9, r11[8]
1.5169 ++ tnbz r10
1.5170 ++ breq 1f
1.5171 ++ cp.w r10, r9
1.5172 ++ brne 1f
1.5173 ++ ld.w r10, r12[12]
1.5174 ++ ld.w r9, r11[12]
1.5175 ++ tnbz r10
1.5176 ++ breq 1f
1.5177 ++ sub r12, -16
1.5178 ++ sub r11, -16
1.5179 ++ cp.w r10, r9
1.5180 ++ breq 0b
1.5181 ++1:
1.5182 ++ bfextu r12, r10, 24, 8
1.5183 ++ bfextu r11, r9, 24, 8
1.5184 ++ reteq r12
1.5185 ++ sub r12, r11
1.5186 ++ retne r12
1.5187 ++
1.5188 ++ bfextu r12, r10, 16, 8
1.5189 ++ bfextu r11, r9, 16, 8
1.5190 ++ reteq r12
1.5191 ++ sub r12, r11
1.5192 ++ retne r12
1.5193 ++
1.5194 ++ bfextu r12, r10, 8, 8
1.5195 ++ bfextu r11, r9, 8, 8
1.5196 ++ reteq r12
1.5197 ++ sub r12, r11
1.5198 ++ retne r12
1.5199 ++
1.5200 ++ castu.b r10
1.5201 ++ castu.b r9
1.5202 ++ sub r10, r9
1.5203 ++ ret r10
1.5204 ++
1.5205 ++.Lbyte_strcmp:
1.5206 ++0:
1.5207 ++ ld.ub r10, r11[0]
1.5208 ++ ld.ub r9, r12[0]
1.5209 ++ cp.w r10, 0
1.5210 ++ reteq r9
1.5211 ++ sub r9, r10
1.5212 ++ retne r9
1.5213 ++ ld.ub r10, r11[1]
1.5214 ++ ld.ub r9, r12[1]
1.5215 ++ cp.w r10, 0
1.5216 ++ reteq r9
1.5217 ++ sub r9, r10
1.5218 ++ retne r9
1.5219 ++ ld.ub r10, r11[2]
1.5220 ++ ld.ub r9, r12[2]
1.5221 ++ cp.w r10, 0
1.5222 ++ reteq r9
1.5223 ++ sub r9, r10
1.5224 ++ retne r9
1.5225 ++ ld.ub r10, r11[3]
1.5226 ++ ld.ub r9, r12[3]
1.5227 ++ cp.w r10, 0
1.5228 ++ reteq r9
1.5229 ++ sub r9, r10
1.5230 ++ retne r9
1.5231 ++ sub r11, -4
1.5232 ++ sub r12, -4
1.5233 ++ rjmp 0b
1.5234 ++#else
1.5235 ++0:
1.5236 ++ ld.ub r10, r11++
1.5237 ++ ld.ub r9, r12++
1.5238 ++ cp.w r10, 0
1.5239 ++ reteq r9
1.5240 ++ sub r9, r10
1.5241 ++ breq 0b
1.5242 ++ ret r9
1.5243 ++#endif
1.5244 ++#else
1.5245 ++0:
1.5246 ++ ld.w r10, r12++
1.5247 ++ ld.w r9, r11++
1.5248 ++ tnbz r10
1.5249 ++ breq 1f
1.5250 ++ cp.w r10, r9
1.5251 ++ breq 0b
1.5252 ++
1.5253 ++1:
1.5254 ++ bfextu r12, r10, 24, 8
1.5255 ++ bfextu r11, r9, 24, 8
1.5256 ++ reteq r12
1.5257 ++ sub r12, r11
1.5258 ++ retne r12
1.5259 ++
1.5260 ++ bfextu r12, r10, 16, 8
1.5261 ++ bfextu r11, r9, 16, 8
1.5262 ++ reteq r12
1.5263 ++ sub r12, r11
1.5264 ++ retne r12
1.5265 ++
1.5266 ++ bfextu r12, r10, 8, 8
1.5267 ++ bfextu r11, r9, 8, 8
1.5268 ++ reteq r12
1.5269 ++ sub r12, r11
1.5270 ++ retne r12
1.5271 ++
1.5272 ++ castu.b r10
1.5273 ++ castu.b r9
1.5274 ++ sub r10, r9
1.5275 ++ ret r10
1.5276 ++#endif
1.5277 +diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S
1.5278 +--- newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S 1970-01-01 01:00:00.000000000 +0100
1.5279 ++++ newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S 2009-05-22 09:57:50.000000000 +0200
1.5280 +@@ -0,0 +1,39 @@
1.5281 ++ .align 2
1.5282 ++ .global strncpy
1.5283 ++
1.5284 ++strncpy :
1.5285 ++#ifdef __AVR32_UC__
1.5286 ++ mov r8, 0
1.5287 ++0:
1.5288 ++ cp.w r10, r8
1.5289 ++ reteq r12
1.5290 ++ ld.ub r9, r11[r8]
1.5291 ++ st.b r12[r8], r9
1.5292 ++ sub r8, -1
1.5293 ++ cp.w r9, 0
1.5294 ++ brne 0b
1.5295 ++
1.5296 ++1:
1.5297 ++ cp.w r10, r8
1.5298 ++ reteq r12
1.5299 ++ st.b r12[r8], r9
1.5300 ++ sub r8, -1
1.5301 ++ rjmp 1b
1.5302 ++#else
1.5303 ++ mov r8, r12
1.5304 ++0:
1.5305 ++ sub r10, 1
1.5306 ++ ld.ub r9, r11++
1.5307 ++ retmi r12
1.5308 ++ st.b r8++, r9
1.5309 ++ cp.w r9, 0
1.5310 ++ brne 0b
1.5311 ++
1.5312 ++1:
1.5313 ++ sub r10, 1
1.5314 ++ retmi r12
1.5315 ++ st.b r8++, r9
1.5316 ++ rjmp 1b
1.5317 ++
1.5318 ++
1.5319 ++#endif
1.5320 +diff -Naur newlib-1.17.0/newlib/libc/machine/configure newlib-1.17.0-new/newlib/libc/machine/configure
1.5321 +--- newlib-1.17.0/newlib/libc/machine/configure 2008-12-22 20:45:41.000000000 +0100
1.5322 ++++ newlib-1.17.0-new/newlib/libc/machine/configure 2009-05-22 09:57:50.000000000 +0200
1.5323 +@@ -1,25 +1,54 @@
1.5324 + #! /bin/sh
1.5325 + # Guess values for system-dependent variables and create Makefiles.
1.5326 +-# Generated by GNU Autoconf 2.59 for newlib 1.17.0.
1.5327 ++# Generated by GNU Autoconf 2.61 for newlib 1.17.0.
1.5328 + #
1.5329 +-# Copyright (C) 2003 Free Software Foundation, Inc.
1.5330 ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
1.5331 ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.5332 + # This configure script is free software; the Free Software Foundation
1.5333 + # gives unlimited permission to copy, distribute and modify it.
1.5334 + ## --------------------- ##
1.5335 + ## M4sh Initialization. ##
1.5336 + ## --------------------- ##
1.5337 +
1.5338 +-# Be Bourne compatible
1.5339 ++# Be more Bourne compatible
1.5340 ++DUALCASE=1; export DUALCASE # for MKS sh
1.5341 + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.5342 + emulate sh
1.5343 + NULLCMD=:
1.5344 + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.5345 + # is contrary to our usage. Disable this feature.
1.5346 + alias -g '${1+"$@"}'='"$@"'
1.5347 +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1.5348 +- set -o posix
1.5349 ++ setopt NO_GLOB_SUBST
1.5350 ++else
1.5351 ++ case `(set -o) 2>/dev/null` in
1.5352 ++ *posix*) set -o posix ;;
1.5353 ++esac
1.5354 ++
1.5355 ++fi
1.5356 ++
1.5357 ++
1.5358 ++
1.5359 ++
1.5360 ++# PATH needs CR
1.5361 ++# Avoid depending upon Character Ranges.
1.5362 ++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.5363 ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.5364 ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.5365 ++as_cr_digits='0123456789'
1.5366 ++as_cr_alnum=$as_cr_Letters$as_cr_digits
1.5367 ++
1.5368 ++# The user is always right.
1.5369 ++if test "${PATH_SEPARATOR+set}" != set; then
1.5370 ++ echo "#! /bin/sh" >conf$$.sh
1.5371 ++ echo "exit 0" >>conf$$.sh
1.5372 ++ chmod +x conf$$.sh
1.5373 ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.5374 ++ PATH_SEPARATOR=';'
1.5375 ++ else
1.5376 ++ PATH_SEPARATOR=:
1.5377 ++ fi
1.5378 ++ rm -f conf$$.sh
1.5379 + fi
1.5380 +-DUALCASE=1; export DUALCASE # for MKS sh
1.5381 +
1.5382 + # Support unset when possible.
1.5383 + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.5384 +@@ -29,8 +58,43 @@
1.5385 + fi
1.5386 +
1.5387 +
1.5388 ++# IFS
1.5389 ++# We need space, tab and new line, in precisely that order. Quoting is
1.5390 ++# there to prevent editors from complaining about space-tab.
1.5391 ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
1.5392 ++# splitting by setting IFS to empty value.)
1.5393 ++as_nl='
1.5394 ++'
1.5395 ++IFS=" "" $as_nl"
1.5396 ++
1.5397 ++# Find who we are. Look in the path if we contain no directory separator.
1.5398 ++case $0 in
1.5399 ++ *[\\/]* ) as_myself=$0 ;;
1.5400 ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.5401 ++for as_dir in $PATH
1.5402 ++do
1.5403 ++ IFS=$as_save_IFS
1.5404 ++ test -z "$as_dir" && as_dir=.
1.5405 ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.5406 ++done
1.5407 ++IFS=$as_save_IFS
1.5408 ++
1.5409 ++ ;;
1.5410 ++esac
1.5411 ++# We did not find ourselves, most probably we were run as `sh COMMAND'
1.5412 ++# in which case we are not to be found in the path.
1.5413 ++if test "x$as_myself" = x; then
1.5414 ++ as_myself=$0
1.5415 ++fi
1.5416 ++if test ! -f "$as_myself"; then
1.5417 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
1.5418 ++ { (exit 1); exit 1; }
1.5419 ++fi
1.5420 ++
1.5421 + # Work around bugs in pre-3.0 UWIN ksh.
1.5422 +-$as_unset ENV MAIL MAILPATH
1.5423 ++for as_var in ENV MAIL MAILPATH
1.5424 ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.5425 ++done
1.5426 + PS1='$ '
1.5427 + PS2='> '
1.5428 + PS4='+ '
1.5429 +@@ -44,18 +108,19 @@
1.5430 + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1.5431 + eval $as_var=C; export $as_var
1.5432 + else
1.5433 +- $as_unset $as_var
1.5434 ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.5435 + fi
1.5436 + done
1.5437 +
1.5438 + # Required to use basename.
1.5439 +-if expr a : '\(a\)' >/dev/null 2>&1; then
1.5440 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.5441 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.5442 + as_expr=expr
1.5443 + else
1.5444 + as_expr=false
1.5445 + fi
1.5446 +
1.5447 +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
1.5448 ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
1.5449 + as_basename=basename
1.5450 + else
1.5451 + as_basename=false
1.5452 +@@ -63,157 +128,388 @@
1.5453 +
1.5454 +
1.5455 + # Name of the executable.
1.5456 +-as_me=`$as_basename "$0" ||
1.5457 ++as_me=`$as_basename -- "$0" ||
1.5458 + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1.5459 + X"$0" : 'X\(//\)$' \| \
1.5460 +- X"$0" : 'X\(/\)$' \| \
1.5461 +- . : '\(.\)' 2>/dev/null ||
1.5462 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.5463 + echo X/"$0" |
1.5464 +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
1.5465 +- /^X\/\(\/\/\)$/{ s//\1/; q; }
1.5466 +- /^X\/\(\/\).*/{ s//\1/; q; }
1.5467 +- s/.*/./; q'`
1.5468 ++ sed '/^.*\/\([^/][^/]*\)\/*$/{
1.5469 ++ s//\1/
1.5470 ++ q
1.5471 ++ }
1.5472 ++ /^X\/\(\/\/\)$/{
1.5473 ++ s//\1/
1.5474 ++ q
1.5475 ++ }
1.5476 ++ /^X\/\(\/\).*/{
1.5477 ++ s//\1/
1.5478 ++ q
1.5479 ++ }
1.5480 ++ s/.*/./; q'`
1.5481 +
1.5482 ++# CDPATH.
1.5483 ++$as_unset CDPATH
1.5484 +
1.5485 +-# PATH needs CR, and LINENO needs CR and PATH.
1.5486 +-# Avoid depending upon Character Ranges.
1.5487 +-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.5488 +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.5489 +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.5490 +-as_cr_digits='0123456789'
1.5491 +-as_cr_alnum=$as_cr_Letters$as_cr_digits
1.5492 +
1.5493 +-# The user is always right.
1.5494 +-if test "${PATH_SEPARATOR+set}" != set; then
1.5495 +- echo "#! /bin/sh" >conf$$.sh
1.5496 +- echo "exit 0" >>conf$$.sh
1.5497 +- chmod +x conf$$.sh
1.5498 +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.5499 +- PATH_SEPARATOR=';'
1.5500 +- else
1.5501 +- PATH_SEPARATOR=:
1.5502 +- fi
1.5503 +- rm -f conf$$.sh
1.5504 ++if test "x$CONFIG_SHELL" = x; then
1.5505 ++ if (eval ":") 2>/dev/null; then
1.5506 ++ as_have_required=yes
1.5507 ++else
1.5508 ++ as_have_required=no
1.5509 + fi
1.5510 +
1.5511 ++ if test $as_have_required = yes && (eval ":
1.5512 ++(as_func_return () {
1.5513 ++ (exit \$1)
1.5514 ++}
1.5515 ++as_func_success () {
1.5516 ++ as_func_return 0
1.5517 ++}
1.5518 ++as_func_failure () {
1.5519 ++ as_func_return 1
1.5520 ++}
1.5521 ++as_func_ret_success () {
1.5522 ++ return 0
1.5523 ++}
1.5524 ++as_func_ret_failure () {
1.5525 ++ return 1
1.5526 ++}
1.5527 +
1.5528 +- as_lineno_1=$LINENO
1.5529 +- as_lineno_2=$LINENO
1.5530 +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1.5531 +- test "x$as_lineno_1" != "x$as_lineno_2" &&
1.5532 +- test "x$as_lineno_3" = "x$as_lineno_2" || {
1.5533 +- # Find who we are. Look in the path if we contain no path at all
1.5534 +- # relative or not.
1.5535 +- case $0 in
1.5536 +- *[\\/]* ) as_myself=$0 ;;
1.5537 +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.5538 +-for as_dir in $PATH
1.5539 +-do
1.5540 +- IFS=$as_save_IFS
1.5541 +- test -z "$as_dir" && as_dir=.
1.5542 +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.5543 +-done
1.5544 ++exitcode=0
1.5545 ++if as_func_success; then
1.5546 ++ :
1.5547 ++else
1.5548 ++ exitcode=1
1.5549 ++ echo as_func_success failed.
1.5550 ++fi
1.5551 +
1.5552 +- ;;
1.5553 +- esac
1.5554 +- # We did not find ourselves, most probably we were run as `sh COMMAND'
1.5555 +- # in which case we are not to be found in the path.
1.5556 +- if test "x$as_myself" = x; then
1.5557 +- as_myself=$0
1.5558 +- fi
1.5559 +- if test ! -f "$as_myself"; then
1.5560 +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
1.5561 +- { (exit 1); exit 1; }; }
1.5562 +- fi
1.5563 +- case $CONFIG_SHELL in
1.5564 +- '')
1.5565 ++if as_func_failure; then
1.5566 ++ exitcode=1
1.5567 ++ echo as_func_failure succeeded.
1.5568 ++fi
1.5569 ++
1.5570 ++if as_func_ret_success; then
1.5571 ++ :
1.5572 ++else
1.5573 ++ exitcode=1
1.5574 ++ echo as_func_ret_success failed.
1.5575 ++fi
1.5576 ++
1.5577 ++if as_func_ret_failure; then
1.5578 ++ exitcode=1
1.5579 ++ echo as_func_ret_failure succeeded.
1.5580 ++fi
1.5581 ++
1.5582 ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
1.5583 ++ :
1.5584 ++else
1.5585 ++ exitcode=1
1.5586 ++ echo positional parameters were not saved.
1.5587 ++fi
1.5588 ++
1.5589 ++test \$exitcode = 0) || { (exit 1); exit 1; }
1.5590 ++
1.5591 ++(
1.5592 ++ as_lineno_1=\$LINENO
1.5593 ++ as_lineno_2=\$LINENO
1.5594 ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
1.5595 ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
1.5596 ++") 2> /dev/null; then
1.5597 ++ :
1.5598 ++else
1.5599 ++ as_candidate_shells=
1.5600 + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.5601 + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1.5602 + do
1.5603 + IFS=$as_save_IFS
1.5604 + test -z "$as_dir" && as_dir=.
1.5605 +- for as_base in sh bash ksh sh5; do
1.5606 +- case $as_dir in
1.5607 ++ case $as_dir in
1.5608 + /*)
1.5609 +- if ("$as_dir/$as_base" -c '
1.5610 ++ for as_base in sh bash ksh sh5; do
1.5611 ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
1.5612 ++ done;;
1.5613 ++ esac
1.5614 ++done
1.5615 ++IFS=$as_save_IFS
1.5616 ++
1.5617 ++
1.5618 ++ for as_shell in $as_candidate_shells $SHELL; do
1.5619 ++ # Try only shells that exist, to save several forks.
1.5620 ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
1.5621 ++ { ("$as_shell") 2> /dev/null <<\_ASEOF
1.5622 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.5623 ++ emulate sh
1.5624 ++ NULLCMD=:
1.5625 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.5626 ++ # is contrary to our usage. Disable this feature.
1.5627 ++ alias -g '${1+"$@"}'='"$@"'
1.5628 ++ setopt NO_GLOB_SUBST
1.5629 ++else
1.5630 ++ case `(set -o) 2>/dev/null` in
1.5631 ++ *posix*) set -o posix ;;
1.5632 ++esac
1.5633 ++
1.5634 ++fi
1.5635 ++
1.5636 ++
1.5637 ++:
1.5638 ++_ASEOF
1.5639 ++}; then
1.5640 ++ CONFIG_SHELL=$as_shell
1.5641 ++ as_have_required=yes
1.5642 ++ if { "$as_shell" 2> /dev/null <<\_ASEOF
1.5643 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.5644 ++ emulate sh
1.5645 ++ NULLCMD=:
1.5646 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.5647 ++ # is contrary to our usage. Disable this feature.
1.5648 ++ alias -g '${1+"$@"}'='"$@"'
1.5649 ++ setopt NO_GLOB_SUBST
1.5650 ++else
1.5651 ++ case `(set -o) 2>/dev/null` in
1.5652 ++ *posix*) set -o posix ;;
1.5653 ++esac
1.5654 ++
1.5655 ++fi
1.5656 ++
1.5657 ++
1.5658 ++:
1.5659 ++(as_func_return () {
1.5660 ++ (exit $1)
1.5661 ++}
1.5662 ++as_func_success () {
1.5663 ++ as_func_return 0
1.5664 ++}
1.5665 ++as_func_failure () {
1.5666 ++ as_func_return 1
1.5667 ++}
1.5668 ++as_func_ret_success () {
1.5669 ++ return 0
1.5670 ++}
1.5671 ++as_func_ret_failure () {
1.5672 ++ return 1
1.5673 ++}
1.5674 ++
1.5675 ++exitcode=0
1.5676 ++if as_func_success; then
1.5677 ++ :
1.5678 ++else
1.5679 ++ exitcode=1
1.5680 ++ echo as_func_success failed.
1.5681 ++fi
1.5682 ++
1.5683 ++if as_func_failure; then
1.5684 ++ exitcode=1
1.5685 ++ echo as_func_failure succeeded.
1.5686 ++fi
1.5687 ++
1.5688 ++if as_func_ret_success; then
1.5689 ++ :
1.5690 ++else
1.5691 ++ exitcode=1
1.5692 ++ echo as_func_ret_success failed.
1.5693 ++fi
1.5694 ++
1.5695 ++if as_func_ret_failure; then
1.5696 ++ exitcode=1
1.5697 ++ echo as_func_ret_failure succeeded.
1.5698 ++fi
1.5699 ++
1.5700 ++if ( set x; as_func_ret_success y && test x = "$1" ); then
1.5701 ++ :
1.5702 ++else
1.5703 ++ exitcode=1
1.5704 ++ echo positional parameters were not saved.
1.5705 ++fi
1.5706 ++
1.5707 ++test $exitcode = 0) || { (exit 1); exit 1; }
1.5708 ++
1.5709 ++(
1.5710 + as_lineno_1=$LINENO
1.5711 + as_lineno_2=$LINENO
1.5712 +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1.5713 + test "x$as_lineno_1" != "x$as_lineno_2" &&
1.5714 +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
1.5715 +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
1.5716 +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
1.5717 +- CONFIG_SHELL=$as_dir/$as_base
1.5718 +- export CONFIG_SHELL
1.5719 +- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
1.5720 +- fi;;
1.5721 +- esac
1.5722 +- done
1.5723 +-done
1.5724 +-;;
1.5725 +- esac
1.5726 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
1.5727 ++
1.5728 ++_ASEOF
1.5729 ++}; then
1.5730 ++ break
1.5731 ++fi
1.5732 ++
1.5733 ++fi
1.5734 ++
1.5735 ++ done
1.5736 ++
1.5737 ++ if test "x$CONFIG_SHELL" != x; then
1.5738 ++ for as_var in BASH_ENV ENV
1.5739 ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.5740 ++ done
1.5741 ++ export CONFIG_SHELL
1.5742 ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
1.5743 ++fi
1.5744 ++
1.5745 ++
1.5746 ++ if test $as_have_required = no; then
1.5747 ++ echo This script requires a shell more modern than all the
1.5748 ++ echo shells that I found on your system. Please install a
1.5749 ++ echo modern shell, or manually run the script under such a
1.5750 ++ echo shell if you do have one.
1.5751 ++ { (exit 1); exit 1; }
1.5752 ++fi
1.5753 ++
1.5754 ++
1.5755 ++fi
1.5756 ++
1.5757 ++fi
1.5758 ++
1.5759 ++
1.5760 ++
1.5761 ++(eval "as_func_return () {
1.5762 ++ (exit \$1)
1.5763 ++}
1.5764 ++as_func_success () {
1.5765 ++ as_func_return 0
1.5766 ++}
1.5767 ++as_func_failure () {
1.5768 ++ as_func_return 1
1.5769 ++}
1.5770 ++as_func_ret_success () {
1.5771 ++ return 0
1.5772 ++}
1.5773 ++as_func_ret_failure () {
1.5774 ++ return 1
1.5775 ++}
1.5776 ++
1.5777 ++exitcode=0
1.5778 ++if as_func_success; then
1.5779 ++ :
1.5780 ++else
1.5781 ++ exitcode=1
1.5782 ++ echo as_func_success failed.
1.5783 ++fi
1.5784 ++
1.5785 ++if as_func_failure; then
1.5786 ++ exitcode=1
1.5787 ++ echo as_func_failure succeeded.
1.5788 ++fi
1.5789 ++
1.5790 ++if as_func_ret_success; then
1.5791 ++ :
1.5792 ++else
1.5793 ++ exitcode=1
1.5794 ++ echo as_func_ret_success failed.
1.5795 ++fi
1.5796 ++
1.5797 ++if as_func_ret_failure; then
1.5798 ++ exitcode=1
1.5799 ++ echo as_func_ret_failure succeeded.
1.5800 ++fi
1.5801 ++
1.5802 ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
1.5803 ++ :
1.5804 ++else
1.5805 ++ exitcode=1
1.5806 ++ echo positional parameters were not saved.
1.5807 ++fi
1.5808 ++
1.5809 ++test \$exitcode = 0") || {
1.5810 ++ echo No shell found that supports shell functions.
1.5811 ++ echo Please tell autoconf@gnu.org about your system,
1.5812 ++ echo including any error possibly output before this
1.5813 ++ echo message
1.5814 ++}
1.5815 ++
1.5816 ++
1.5817 ++
1.5818 ++ as_lineno_1=$LINENO
1.5819 ++ as_lineno_2=$LINENO
1.5820 ++ test "x$as_lineno_1" != "x$as_lineno_2" &&
1.5821 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
1.5822 +
1.5823 + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1.5824 + # uniformly replaced by the line number. The first 'sed' inserts a
1.5825 +- # line-number line before each line; the second 'sed' does the real
1.5826 +- # work. The second script uses 'N' to pair each line-number line
1.5827 +- # with the numbered line, and appends trailing '-' during
1.5828 +- # substitution so that $LINENO is not a special case at line end.
1.5829 ++ # line-number line after each line using $LINENO; the second 'sed'
1.5830 ++ # does the real work. The second script uses 'N' to pair each
1.5831 ++ # line-number line with the line containing $LINENO, and appends
1.5832 ++ # trailing '-' during substitution so that $LINENO is not a special
1.5833 ++ # case at line end.
1.5834 + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1.5835 +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
1.5836 +- sed '=' <$as_myself |
1.5837 ++ # scripts with optimization help from Paolo Bonzini. Blame Lee
1.5838 ++ # E. McMahon (1931-1989) for sed's syntax. :-)
1.5839 ++ sed -n '
1.5840 ++ p
1.5841 ++ /[$]LINENO/=
1.5842 ++ ' <$as_myself |
1.5843 + sed '
1.5844 ++ s/[$]LINENO.*/&-/
1.5845 ++ t lineno
1.5846 ++ b
1.5847 ++ :lineno
1.5848 + N
1.5849 +- s,$,-,
1.5850 +- : loop
1.5851 +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
1.5852 ++ :loop
1.5853 ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
1.5854 + t loop
1.5855 +- s,-$,,
1.5856 +- s,^['$as_cr_digits']*\n,,
1.5857 ++ s/-\n.*//
1.5858 + ' >$as_me.lineno &&
1.5859 +- chmod +x $as_me.lineno ||
1.5860 ++ chmod +x "$as_me.lineno" ||
1.5861 + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
1.5862 + { (exit 1); exit 1; }; }
1.5863 +
1.5864 + # Don't try to exec as it changes $[0], causing all sort of problems
1.5865 + # (the dirname of $[0] is not the place where we might find the
1.5866 +- # original and so on. Autoconf is especially sensible to this).
1.5867 +- . ./$as_me.lineno
1.5868 ++ # original and so on. Autoconf is especially sensitive to this).
1.5869 ++ . "./$as_me.lineno"
1.5870 + # Exit status is that of the last command.
1.5871 + exit
1.5872 + }
1.5873 +
1.5874 +
1.5875 +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1.5876 +- *c*,-n*) ECHO_N= ECHO_C='
1.5877 +-' ECHO_T=' ' ;;
1.5878 +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
1.5879 +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
1.5880 ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
1.5881 ++ as_dirname=dirname
1.5882 ++else
1.5883 ++ as_dirname=false
1.5884 ++fi
1.5885 ++
1.5886 ++ECHO_C= ECHO_N= ECHO_T=
1.5887 ++case `echo -n x` in
1.5888 ++-n*)
1.5889 ++ case `echo 'x\c'` in
1.5890 ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
1.5891 ++ *) ECHO_C='\c';;
1.5892 ++ esac;;
1.5893 ++*)
1.5894 ++ ECHO_N='-n';;
1.5895 + esac
1.5896 +
1.5897 +-if expr a : '\(a\)' >/dev/null 2>&1; then
1.5898 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.5899 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.5900 + as_expr=expr
1.5901 + else
1.5902 + as_expr=false
1.5903 + fi
1.5904 +
1.5905 + rm -f conf$$ conf$$.exe conf$$.file
1.5906 ++if test -d conf$$.dir; then
1.5907 ++ rm -f conf$$.dir/conf$$.file
1.5908 ++else
1.5909 ++ rm -f conf$$.dir
1.5910 ++ mkdir conf$$.dir
1.5911 ++fi
1.5912 + echo >conf$$.file
1.5913 + if ln -s conf$$.file conf$$ 2>/dev/null; then
1.5914 +- # We could just check for DJGPP; but this test a) works b) is more generic
1.5915 +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1.5916 +- if test -f conf$$.exe; then
1.5917 +- # Don't use ln at all; we don't have any links
1.5918 ++ as_ln_s='ln -s'
1.5919 ++ # ... but there are two gotchas:
1.5920 ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
1.5921 ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
1.5922 ++ # In both cases, we have to default to `cp -p'.
1.5923 ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
1.5924 + as_ln_s='cp -p'
1.5925 +- else
1.5926 +- as_ln_s='ln -s'
1.5927 +- fi
1.5928 + elif ln conf$$.file conf$$ 2>/dev/null; then
1.5929 + as_ln_s=ln
1.5930 + else
1.5931 + as_ln_s='cp -p'
1.5932 + fi
1.5933 +-rm -f conf$$ conf$$.exe conf$$.file
1.5934 ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
1.5935 ++rmdir conf$$.dir 2>/dev/null
1.5936 +
1.5937 + if mkdir -p . 2>/dev/null; then
1.5938 + as_mkdir_p=:
1.5939 +@@ -222,7 +518,28 @@
1.5940 + as_mkdir_p=false
1.5941 + fi
1.5942 +
1.5943 +-as_executable_p="test -f"
1.5944 ++if test -x / >/dev/null 2>&1; then
1.5945 ++ as_test_x='test -x'
1.5946 ++else
1.5947 ++ if ls -dL / >/dev/null 2>&1; then
1.5948 ++ as_ls_L_option=L
1.5949 ++ else
1.5950 ++ as_ls_L_option=
1.5951 ++ fi
1.5952 ++ as_test_x='
1.5953 ++ eval sh -c '\''
1.5954 ++ if test -d "$1"; then
1.5955 ++ test -d "$1/.";
1.5956 ++ else
1.5957 ++ case $1 in
1.5958 ++ -*)set "./$1";;
1.5959 ++ esac;
1.5960 ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
1.5961 ++ ???[sx]*):;;*)false;;esac;fi
1.5962 ++ '\'' sh
1.5963 ++ '
1.5964 ++fi
1.5965 ++as_executable_p=$as_test_x
1.5966 +
1.5967 + # Sed expression to map a string onto a valid CPP name.
1.5968 + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1.5969 +@@ -231,15 +548,6 @@
1.5970 + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1.5971 +
1.5972 +
1.5973 +-# IFS
1.5974 +-# We need space, tab and new line, in precisely that order.
1.5975 +-as_nl='
1.5976 +-'
1.5977 +-IFS=" $as_nl"
1.5978 +-
1.5979 +-# CDPATH.
1.5980 +-$as_unset CDPATH
1.5981 +-
1.5982 +
1.5983 +
1.5984 + # Check that we are running under the correct shell.
1.5985 +@@ -390,29 +698,26 @@
1.5986 +
1.5987 +
1.5988 +
1.5989 ++exec 7<&0 </dev/null 6>&1
1.5990 ++
1.5991 + # Name of the host.
1.5992 + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
1.5993 + # so uname gets run too.
1.5994 + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
1.5995 +
1.5996 +-exec 6>&1
1.5997 +-
1.5998 + #
1.5999 + # Initializations.
1.6000 + #
1.6001 + ac_default_prefix=/usr/local
1.6002 ++ac_clean_files=
1.6003 + ac_config_libobj_dir=.
1.6004 ++LIBOBJS=
1.6005 + cross_compiling=no
1.6006 + subdirs=
1.6007 + MFLAGS=
1.6008 + MAKEFLAGS=
1.6009 + SHELL=${CONFIG_SHELL-/bin/sh}
1.6010 +
1.6011 +-# Maximum number of lines to put in a shell here document.
1.6012 +-# This variable seems obsolete. It should probably be removed, and
1.6013 +-# only ac_max_sed_lines should be used.
1.6014 +-: ${ac_max_here_lines=38}
1.6015 +-
1.6016 + # Identity of this package.
1.6017 + PACKAGE_NAME='newlib'
1.6018 + PACKAGE_TARNAME='newlib'
1.6019 +@@ -424,81 +729,228 @@
1.6020 + # Factoring default headers for most tests.
1.6021 + ac_includes_default="\
1.6022 + #include <stdio.h>
1.6023 +-#if HAVE_SYS_TYPES_H
1.6024 ++#ifdef HAVE_SYS_TYPES_H
1.6025 + # include <sys/types.h>
1.6026 + #endif
1.6027 +-#if HAVE_SYS_STAT_H
1.6028 ++#ifdef HAVE_SYS_STAT_H
1.6029 + # include <sys/stat.h>
1.6030 + #endif
1.6031 +-#if STDC_HEADERS
1.6032 ++#ifdef STDC_HEADERS
1.6033 + # include <stdlib.h>
1.6034 + # include <stddef.h>
1.6035 + #else
1.6036 +-# if HAVE_STDLIB_H
1.6037 ++# ifdef HAVE_STDLIB_H
1.6038 + # include <stdlib.h>
1.6039 + # endif
1.6040 + #endif
1.6041 +-#if HAVE_STRING_H
1.6042 +-# if !STDC_HEADERS && HAVE_MEMORY_H
1.6043 ++#ifdef HAVE_STRING_H
1.6044 ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
1.6045 + # include <memory.h>
1.6046 + # endif
1.6047 + # include <string.h>
1.6048 + #endif
1.6049 +-#if HAVE_STRINGS_H
1.6050 ++#ifdef HAVE_STRINGS_H
1.6051 + # include <strings.h>
1.6052 + #endif
1.6053 +-#if HAVE_INTTYPES_H
1.6054 ++#ifdef HAVE_INTTYPES_H
1.6055 + # include <inttypes.h>
1.6056 +-#else
1.6057 +-# if HAVE_STDINT_H
1.6058 +-# include <stdint.h>
1.6059 +-# endif
1.6060 + #endif
1.6061 +-#if HAVE_UNISTD_H
1.6062 ++#ifdef HAVE_STDINT_H
1.6063 ++# include <stdint.h>
1.6064 ++#endif
1.6065 ++#ifdef HAVE_UNISTD_H
1.6066 + # include <unistd.h>
1.6067 + #endif"
1.6068 +
1.6069 +-ac_subdirs_all="$ac_subdirs_all a29k"
1.6070 +-ac_subdirs_all="$ac_subdirs_all arm"
1.6071 +-ac_subdirs_all="$ac_subdirs_all bfin"
1.6072 +-ac_subdirs_all="$ac_subdirs_all cris"
1.6073 +-ac_subdirs_all="$ac_subdirs_all crx"
1.6074 +-ac_subdirs_all="$ac_subdirs_all d10v"
1.6075 +-ac_subdirs_all="$ac_subdirs_all d30v"
1.6076 +-ac_subdirs_all="$ac_subdirs_all fr30"
1.6077 +-ac_subdirs_all="$ac_subdirs_all frv"
1.6078 +-ac_subdirs_all="$ac_subdirs_all h8300"
1.6079 +-ac_subdirs_all="$ac_subdirs_all h8500"
1.6080 +-ac_subdirs_all="$ac_subdirs_all hppa"
1.6081 +-ac_subdirs_all="$ac_subdirs_all i386"
1.6082 +-ac_subdirs_all="$ac_subdirs_all i960"
1.6083 +-ac_subdirs_all="$ac_subdirs_all iq2000"
1.6084 +-ac_subdirs_all="$ac_subdirs_all lm32"
1.6085 +-ac_subdirs_all="$ac_subdirs_all m32c"
1.6086 +-ac_subdirs_all="$ac_subdirs_all m32r"
1.6087 +-ac_subdirs_all="$ac_subdirs_all m68hc11"
1.6088 +-ac_subdirs_all="$ac_subdirs_all m68k"
1.6089 +-ac_subdirs_all="$ac_subdirs_all m88k"
1.6090 +-ac_subdirs_all="$ac_subdirs_all mep"
1.6091 +-ac_subdirs_all="$ac_subdirs_all mips"
1.6092 +-ac_subdirs_all="$ac_subdirs_all mn10200"
1.6093 +-ac_subdirs_all="$ac_subdirs_all mn10300"
1.6094 +-ac_subdirs_all="$ac_subdirs_all mt"
1.6095 +-ac_subdirs_all="$ac_subdirs_all necv70"
1.6096 +-ac_subdirs_all="$ac_subdirs_all powerpc"
1.6097 +-ac_subdirs_all="$ac_subdirs_all sh"
1.6098 +-ac_subdirs_all="$ac_subdirs_all sparc"
1.6099 +-ac_subdirs_all="$ac_subdirs_all spu"
1.6100 +-ac_subdirs_all="$ac_subdirs_all tic4x"
1.6101 +-ac_subdirs_all="$ac_subdirs_all tic80"
1.6102 +-ac_subdirs_all="$ac_subdirs_all v850"
1.6103 +-ac_subdirs_all="$ac_subdirs_all w65"
1.6104 +-ac_subdirs_all="$ac_subdirs_all x86_64"
1.6105 +-ac_subdirs_all="$ac_subdirs_all xscale"
1.6106 +-ac_subdirs_all="$ac_subdirs_all xstormy16"
1.6107 +-ac_subdirs_all="$ac_subdirs_all z8k"
1.6108 +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs HAVE_MACHINE_DIR_TRUE HAVE_MACHINE_DIR_FALSE LIBOBJS LTLIBOBJS'
1.6109 ++ac_subst_vars='SHELL
1.6110 ++PATH_SEPARATOR
1.6111 ++PACKAGE_NAME
1.6112 ++PACKAGE_TARNAME
1.6113 ++PACKAGE_VERSION
1.6114 ++PACKAGE_STRING
1.6115 ++PACKAGE_BUGREPORT
1.6116 ++exec_prefix
1.6117 ++prefix
1.6118 ++program_transform_name
1.6119 ++bindir
1.6120 ++sbindir
1.6121 ++libexecdir
1.6122 ++datarootdir
1.6123 ++datadir
1.6124 ++sysconfdir
1.6125 ++sharedstatedir
1.6126 ++localstatedir
1.6127 ++includedir
1.6128 ++oldincludedir
1.6129 ++docdir
1.6130 ++infodir
1.6131 ++htmldir
1.6132 ++dvidir
1.6133 ++pdfdir
1.6134 ++psdir
1.6135 ++libdir
1.6136 ++localedir
1.6137 ++mandir
1.6138 ++DEFS
1.6139 ++ECHO_C
1.6140 ++ECHO_N
1.6141 ++ECHO_T
1.6142 ++LIBS
1.6143 ++build_alias
1.6144 ++host_alias
1.6145 ++target_alias
1.6146 ++MAY_SUPPLY_SYSCALLS_TRUE
1.6147 ++MAY_SUPPLY_SYSCALLS_FALSE
1.6148 ++newlib_basedir
1.6149 ++build
1.6150 ++build_cpu
1.6151 ++build_vendor
1.6152 ++build_os
1.6153 ++host
1.6154 ++host_cpu
1.6155 ++host_vendor
1.6156 ++host_os
1.6157 ++INSTALL_PROGRAM
1.6158 ++INSTALL_SCRIPT
1.6159 ++INSTALL_DATA
1.6160 ++CYGPATH_W
1.6161 ++PACKAGE
1.6162 ++VERSION
1.6163 ++ACLOCAL
1.6164 ++AUTOCONF
1.6165 ++AUTOMAKE
1.6166 ++AUTOHEADER
1.6167 ++MAKEINFO
1.6168 ++install_sh
1.6169 ++STRIP
1.6170 ++INSTALL_STRIP_PROGRAM
1.6171 ++mkdir_p
1.6172 ++AWK
1.6173 ++SET_MAKE
1.6174 ++am__leading_dot
1.6175 ++AMTAR
1.6176 ++am__tar
1.6177 ++am__untar
1.6178 ++CC
1.6179 ++DEPDIR
1.6180 ++am__include
1.6181 ++am__quote
1.6182 ++AMDEP_TRUE
1.6183 ++AMDEP_FALSE
1.6184 ++AMDEPBACKSLASH
1.6185 ++CCDEPMODE
1.6186 ++am__fastdepCC_TRUE
1.6187 ++am__fastdepCC_FALSE
1.6188 ++AS
1.6189 ++AR
1.6190 ++RANLIB
1.6191 ++READELF
1.6192 ++MAINTAINER_MODE_TRUE
1.6193 ++MAINTAINER_MODE_FALSE
1.6194 ++MAINT
1.6195 ++CCAS
1.6196 ++CCASFLAGS
1.6197 ++NEWLIB_CFLAGS
1.6198 ++LDFLAGS
1.6199 ++ELIX_LEVEL_0_TRUE
1.6200 ++ELIX_LEVEL_0_FALSE
1.6201 ++ELIX_LEVEL_1_TRUE
1.6202 ++ELIX_LEVEL_1_FALSE
1.6203 ++ELIX_LEVEL_2_TRUE
1.6204 ++ELIX_LEVEL_2_FALSE
1.6205 ++ELIX_LEVEL_3_TRUE
1.6206 ++ELIX_LEVEL_3_FALSE
1.6207 ++ELIX_LEVEL_4_TRUE
1.6208 ++ELIX_LEVEL_4_FALSE
1.6209 ++USE_LIBTOOL_TRUE
1.6210 ++USE_LIBTOOL_FALSE
1.6211 ++OBJEXT
1.6212 ++oext
1.6213 ++aext
1.6214 ++lpfx
1.6215 ++libm_machine_dir
1.6216 ++machine_dir
1.6217 ++sys_dir
1.6218 ++SED
1.6219 ++DLLTOOL
1.6220 ++OBJDUMP
1.6221 ++LIBTOOL
1.6222 ++CFLAGS
1.6223 ++CPPFLAGS
1.6224 ++ac_ct_CC
1.6225 ++EXEEXT
1.6226 ++GREP
1.6227 ++EGREP
1.6228 ++FGREP
1.6229 ++LD
1.6230 ++DUMPBIN
1.6231 ++ac_ct_DUMPBIN
1.6232 ++NM
1.6233 ++LN_S
1.6234 ++lt_ECHO
1.6235 ++DSYMUTIL
1.6236 ++NMEDIT
1.6237 ++LIPO
1.6238 ++OTOOL
1.6239 ++OTOOL64
1.6240 ++CPP
1.6241 ++subdirs
1.6242 ++HAVE_MACHINE_DIR_TRUE
1.6243 ++HAVE_MACHINE_DIR_FALSE
1.6244 ++LIBOBJS
1.6245 ++LTLIBOBJS'
1.6246 + ac_subst_files=''
1.6247 ++ ac_precious_vars='build_alias
1.6248 ++host_alias
1.6249 ++target_alias
1.6250 ++CCAS
1.6251 ++CCASFLAGS
1.6252 ++CC
1.6253 ++CFLAGS
1.6254 ++LDFLAGS
1.6255 ++LIBS
1.6256 ++CPPFLAGS
1.6257 ++CPP'
1.6258 ++ac_subdirs_all='a29k
1.6259 ++arm
1.6260 ++avr32
1.6261 ++bfin
1.6262 ++cris
1.6263 ++crx
1.6264 ++d10v
1.6265 ++d30v
1.6266 ++fr30
1.6267 ++frv
1.6268 ++h8300
1.6269 ++h8500
1.6270 ++hppa
1.6271 ++i386
1.6272 ++i960
1.6273 ++iq2000
1.6274 ++lm32
1.6275 ++m32c
1.6276 ++m32r
1.6277 ++m68hc11
1.6278 ++m68k
1.6279 ++m88k
1.6280 ++mep
1.6281 ++mips
1.6282 ++mn10200
1.6283 ++mn10300
1.6284 ++mt
1.6285 ++necv70
1.6286 ++powerpc
1.6287 ++sh
1.6288 ++sparc
1.6289 ++spu
1.6290 ++tic4x
1.6291 ++tic80
1.6292 ++v850
1.6293 ++w65
1.6294 ++x86_64
1.6295 ++xscale
1.6296 ++xstormy16
1.6297 ++z8k'
1.6298 +
1.6299 + # Initialize some variables set by options.
1.6300 + ac_init_help=
1.6301 +@@ -525,34 +977,48 @@
1.6302 + # and all the variables that are supposed to be based on exec_prefix
1.6303 + # by default will actually change.
1.6304 + # Use braces instead of parens because sh, perl, etc. also accept them.
1.6305 ++# (The list follows the same order as the GNU Coding Standards.)
1.6306 + bindir='${exec_prefix}/bin'
1.6307 + sbindir='${exec_prefix}/sbin'
1.6308 + libexecdir='${exec_prefix}/libexec'
1.6309 +-datadir='${prefix}/share'
1.6310 ++datarootdir='${prefix}/share'
1.6311 ++datadir='${datarootdir}'
1.6312 + sysconfdir='${prefix}/etc'
1.6313 + sharedstatedir='${prefix}/com'
1.6314 + localstatedir='${prefix}/var'
1.6315 +-libdir='${exec_prefix}/lib'
1.6316 + includedir='${prefix}/include'
1.6317 + oldincludedir='/usr/include'
1.6318 +-infodir='${prefix}/info'
1.6319 +-mandir='${prefix}/man'
1.6320 ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
1.6321 ++infodir='${datarootdir}/info'
1.6322 ++htmldir='${docdir}'
1.6323 ++dvidir='${docdir}'
1.6324 ++pdfdir='${docdir}'
1.6325 ++psdir='${docdir}'
1.6326 ++libdir='${exec_prefix}/lib'
1.6327 ++localedir='${datarootdir}/locale'
1.6328 ++mandir='${datarootdir}/man'
1.6329 +
1.6330 + ac_prev=
1.6331 ++ac_dashdash=
1.6332 + for ac_option
1.6333 + do
1.6334 + # If the previous option needs an argument, assign it.
1.6335 + if test -n "$ac_prev"; then
1.6336 +- eval "$ac_prev=\$ac_option"
1.6337 ++ eval $ac_prev=\$ac_option
1.6338 + ac_prev=
1.6339 + continue
1.6340 + fi
1.6341 +
1.6342 +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
1.6343 ++ case $ac_option in
1.6344 ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
1.6345 ++ *) ac_optarg=yes ;;
1.6346 ++ esac
1.6347 +
1.6348 + # Accept the important Cygnus configure options, so we can diagnose typos.
1.6349 +
1.6350 +- case $ac_option in
1.6351 ++ case $ac_dashdash$ac_option in
1.6352 ++ --)
1.6353 ++ ac_dashdash=yes ;;
1.6354 +
1.6355 + -bindir | --bindir | --bindi | --bind | --bin | --bi)
1.6356 + ac_prev=bindir ;;
1.6357 +@@ -574,33 +1040,45 @@
1.6358 + --config-cache | -C)
1.6359 + cache_file=config.cache ;;
1.6360 +
1.6361 +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
1.6362 ++ -datadir | --datadir | --datadi | --datad)
1.6363 + ac_prev=datadir ;;
1.6364 +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
1.6365 +- | --da=*)
1.6366 ++ -datadir=* | --datadir=* | --datadi=* | --datad=*)
1.6367 + datadir=$ac_optarg ;;
1.6368 +
1.6369 ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
1.6370 ++ | --dataroo | --dataro | --datar)
1.6371 ++ ac_prev=datarootdir ;;
1.6372 ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
1.6373 ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
1.6374 ++ datarootdir=$ac_optarg ;;
1.6375 ++
1.6376 + -disable-* | --disable-*)
1.6377 + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
1.6378 + # Reject names that are not valid shell variable names.
1.6379 +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
1.6380 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.6381 + { echo "$as_me: error: invalid feature name: $ac_feature" >&2
1.6382 + { (exit 1); exit 1; }; }
1.6383 +- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
1.6384 +- eval "enable_$ac_feature=no" ;;
1.6385 ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
1.6386 ++ eval enable_$ac_feature=no ;;
1.6387 ++
1.6388 ++ -docdir | --docdir | --docdi | --doc | --do)
1.6389 ++ ac_prev=docdir ;;
1.6390 ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
1.6391 ++ docdir=$ac_optarg ;;
1.6392 ++
1.6393 ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
1.6394 ++ ac_prev=dvidir ;;
1.6395 ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
1.6396 ++ dvidir=$ac_optarg ;;
1.6397 +
1.6398 + -enable-* | --enable-*)
1.6399 + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
1.6400 + # Reject names that are not valid shell variable names.
1.6401 +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
1.6402 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.6403 + { echo "$as_me: error: invalid feature name: $ac_feature" >&2
1.6404 + { (exit 1); exit 1; }; }
1.6405 +- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
1.6406 +- case $ac_option in
1.6407 +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
1.6408 +- *) ac_optarg=yes ;;
1.6409 +- esac
1.6410 +- eval "enable_$ac_feature='$ac_optarg'" ;;
1.6411 ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
1.6412 ++ eval enable_$ac_feature=\$ac_optarg ;;
1.6413 +
1.6414 + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
1.6415 + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
1.6416 +@@ -627,6 +1105,12 @@
1.6417 + -host=* | --host=* | --hos=* | --ho=*)
1.6418 + host_alias=$ac_optarg ;;
1.6419 +
1.6420 ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
1.6421 ++ ac_prev=htmldir ;;
1.6422 ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
1.6423 ++ | --ht=*)
1.6424 ++ htmldir=$ac_optarg ;;
1.6425 ++
1.6426 + -includedir | --includedir | --includedi | --included | --include \
1.6427 + | --includ | --inclu | --incl | --inc)
1.6428 + ac_prev=includedir ;;
1.6429 +@@ -651,13 +1135,16 @@
1.6430 + | --libexe=* | --libex=* | --libe=*)
1.6431 + libexecdir=$ac_optarg ;;
1.6432 +
1.6433 ++ -localedir | --localedir | --localedi | --localed | --locale)
1.6434 ++ ac_prev=localedir ;;
1.6435 ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
1.6436 ++ localedir=$ac_optarg ;;
1.6437 ++
1.6438 + -localstatedir | --localstatedir | --localstatedi | --localstated \
1.6439 +- | --localstate | --localstat | --localsta | --localst \
1.6440 +- | --locals | --local | --loca | --loc | --lo)
1.6441 ++ | --localstate | --localstat | --localsta | --localst | --locals)
1.6442 + ac_prev=localstatedir ;;
1.6443 + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
1.6444 +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
1.6445 +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
1.6446 ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
1.6447 + localstatedir=$ac_optarg ;;
1.6448 +
1.6449 + -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
1.6450 +@@ -722,6 +1209,16 @@
1.6451 + | --progr-tra=* | --program-tr=* | --program-t=*)
1.6452 + program_transform_name=$ac_optarg ;;
1.6453 +
1.6454 ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
1.6455 ++ ac_prev=pdfdir ;;
1.6456 ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
1.6457 ++ pdfdir=$ac_optarg ;;
1.6458 ++
1.6459 ++ -psdir | --psdir | --psdi | --psd | --ps)
1.6460 ++ ac_prev=psdir ;;
1.6461 ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
1.6462 ++ psdir=$ac_optarg ;;
1.6463 ++
1.6464 + -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.6465 + | -silent | --silent | --silen | --sile | --sil)
1.6466 + silent=yes ;;
1.6467 +@@ -774,24 +1271,20 @@
1.6468 + -with-* | --with-*)
1.6469 + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
1.6470 + # Reject names that are not valid shell variable names.
1.6471 +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
1.6472 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.6473 + { echo "$as_me: error: invalid package name: $ac_package" >&2
1.6474 + { (exit 1); exit 1; }; }
1.6475 +- ac_package=`echo $ac_package| sed 's/-/_/g'`
1.6476 +- case $ac_option in
1.6477 +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
1.6478 +- *) ac_optarg=yes ;;
1.6479 +- esac
1.6480 +- eval "with_$ac_package='$ac_optarg'" ;;
1.6481 ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
1.6482 ++ eval with_$ac_package=\$ac_optarg ;;
1.6483 +
1.6484 + -without-* | --without-*)
1.6485 + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
1.6486 + # Reject names that are not valid shell variable names.
1.6487 +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
1.6488 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.6489 + { echo "$as_me: error: invalid package name: $ac_package" >&2
1.6490 + { (exit 1); exit 1; }; }
1.6491 +- ac_package=`echo $ac_package | sed 's/-/_/g'`
1.6492 +- eval "with_$ac_package=no" ;;
1.6493 ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
1.6494 ++ eval with_$ac_package=no ;;
1.6495 +
1.6496 + --x)
1.6497 + # Obsolete; use --with-x.
1.6498 +@@ -822,8 +1315,7 @@
1.6499 + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
1.6500 + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
1.6501 + { (exit 1); exit 1; }; }
1.6502 +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
1.6503 +- eval "$ac_envvar='$ac_optarg'"
1.6504 ++ eval $ac_envvar=\$ac_optarg
1.6505 + export $ac_envvar ;;
1.6506 +
1.6507 + *)
1.6508 +@@ -843,27 +1335,19 @@
1.6509 + { (exit 1); exit 1; }; }
1.6510 + fi
1.6511 +
1.6512 +-# Be sure to have absolute paths.
1.6513 +-for ac_var in exec_prefix prefix
1.6514 +-do
1.6515 +- eval ac_val=$`echo $ac_var`
1.6516 +- case $ac_val in
1.6517 +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
1.6518 +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
1.6519 +- { (exit 1); exit 1; }; };;
1.6520 +- esac
1.6521 +-done
1.6522 +-
1.6523 +-# Be sure to have absolute paths.
1.6524 +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
1.6525 +- localstatedir libdir includedir oldincludedir infodir mandir
1.6526 ++# Be sure to have absolute directory names.
1.6527 ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
1.6528 ++ datadir sysconfdir sharedstatedir localstatedir includedir \
1.6529 ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
1.6530 ++ libdir localedir mandir
1.6531 + do
1.6532 +- eval ac_val=$`echo $ac_var`
1.6533 ++ eval ac_val=\$$ac_var
1.6534 + case $ac_val in
1.6535 +- [\\/$]* | ?:[\\/]* ) ;;
1.6536 +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
1.6537 +- { (exit 1); exit 1; }; };;
1.6538 ++ [\\/$]* | ?:[\\/]* ) continue;;
1.6539 ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
1.6540 + esac
1.6541 ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
1.6542 ++ { (exit 1); exit 1; }; }
1.6543 + done
1.6544 +
1.6545 + # There might be people who depend on the old broken behavior: `$host'
1.6546 +@@ -890,82 +1374,76 @@
1.6547 + test "$silent" = yes && exec 6>/dev/null
1.6548 +
1.6549 +
1.6550 ++ac_pwd=`pwd` && test -n "$ac_pwd" &&
1.6551 ++ac_ls_di=`ls -di .` &&
1.6552 ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
1.6553 ++ { echo "$as_me: error: Working directory cannot be determined" >&2
1.6554 ++ { (exit 1); exit 1; }; }
1.6555 ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
1.6556 ++ { echo "$as_me: error: pwd does not report name of working directory" >&2
1.6557 ++ { (exit 1); exit 1; }; }
1.6558 ++
1.6559 ++
1.6560 + # Find the source files, if location was not specified.
1.6561 + if test -z "$srcdir"; then
1.6562 + ac_srcdir_defaulted=yes
1.6563 +- # Try the directory containing this script, then its parent.
1.6564 +- ac_confdir=`(dirname "$0") 2>/dev/null ||
1.6565 ++ # Try the directory containing this script, then the parent directory.
1.6566 ++ ac_confdir=`$as_dirname -- "$0" ||
1.6567 + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.6568 + X"$0" : 'X\(//\)[^/]' \| \
1.6569 + X"$0" : 'X\(//\)$' \| \
1.6570 +- X"$0" : 'X\(/\)' \| \
1.6571 +- . : '\(.\)' 2>/dev/null ||
1.6572 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.6573 + echo X"$0" |
1.6574 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.6575 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.6576 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.6577 +- /^X\(\/\).*/{ s//\1/; q; }
1.6578 +- s/.*/./; q'`
1.6579 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.6580 ++ s//\1/
1.6581 ++ q
1.6582 ++ }
1.6583 ++ /^X\(\/\/\)[^/].*/{
1.6584 ++ s//\1/
1.6585 ++ q
1.6586 ++ }
1.6587 ++ /^X\(\/\/\)$/{
1.6588 ++ s//\1/
1.6589 ++ q
1.6590 ++ }
1.6591 ++ /^X\(\/\).*/{
1.6592 ++ s//\1/
1.6593 ++ q
1.6594 ++ }
1.6595 ++ s/.*/./; q'`
1.6596 + srcdir=$ac_confdir
1.6597 +- if test ! -r $srcdir/$ac_unique_file; then
1.6598 ++ if test ! -r "$srcdir/$ac_unique_file"; then
1.6599 + srcdir=..
1.6600 + fi
1.6601 + else
1.6602 + ac_srcdir_defaulted=no
1.6603 + fi
1.6604 +-if test ! -r $srcdir/$ac_unique_file; then
1.6605 +- if test "$ac_srcdir_defaulted" = yes; then
1.6606 +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
1.6607 +- { (exit 1); exit 1; }; }
1.6608 +- else
1.6609 +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
1.6610 +- { (exit 1); exit 1; }; }
1.6611 +- fi
1.6612 +-fi
1.6613 +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
1.6614 +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
1.6615 +- { (exit 1); exit 1; }; }
1.6616 +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
1.6617 +-ac_env_build_alias_set=${build_alias+set}
1.6618 +-ac_env_build_alias_value=$build_alias
1.6619 +-ac_cv_env_build_alias_set=${build_alias+set}
1.6620 +-ac_cv_env_build_alias_value=$build_alias
1.6621 +-ac_env_host_alias_set=${host_alias+set}
1.6622 +-ac_env_host_alias_value=$host_alias
1.6623 +-ac_cv_env_host_alias_set=${host_alias+set}
1.6624 +-ac_cv_env_host_alias_value=$host_alias
1.6625 +-ac_env_target_alias_set=${target_alias+set}
1.6626 +-ac_env_target_alias_value=$target_alias
1.6627 +-ac_cv_env_target_alias_set=${target_alias+set}
1.6628 +-ac_cv_env_target_alias_value=$target_alias
1.6629 +-ac_env_CCAS_set=${CCAS+set}
1.6630 +-ac_env_CCAS_value=$CCAS
1.6631 +-ac_cv_env_CCAS_set=${CCAS+set}
1.6632 +-ac_cv_env_CCAS_value=$CCAS
1.6633 +-ac_env_CCASFLAGS_set=${CCASFLAGS+set}
1.6634 +-ac_env_CCASFLAGS_value=$CCASFLAGS
1.6635 +-ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set}
1.6636 +-ac_cv_env_CCASFLAGS_value=$CCASFLAGS
1.6637 +-ac_env_CC_set=${CC+set}
1.6638 +-ac_env_CC_value=$CC
1.6639 +-ac_cv_env_CC_set=${CC+set}
1.6640 +-ac_cv_env_CC_value=$CC
1.6641 +-ac_env_CFLAGS_set=${CFLAGS+set}
1.6642 +-ac_env_CFLAGS_value=$CFLAGS
1.6643 +-ac_cv_env_CFLAGS_set=${CFLAGS+set}
1.6644 +-ac_cv_env_CFLAGS_value=$CFLAGS
1.6645 +-ac_env_LDFLAGS_set=${LDFLAGS+set}
1.6646 +-ac_env_LDFLAGS_value=$LDFLAGS
1.6647 +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
1.6648 +-ac_cv_env_LDFLAGS_value=$LDFLAGS
1.6649 +-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
1.6650 +-ac_env_CPPFLAGS_value=$CPPFLAGS
1.6651 +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
1.6652 +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
1.6653 +-ac_env_CPP_set=${CPP+set}
1.6654 +-ac_env_CPP_value=$CPP
1.6655 +-ac_cv_env_CPP_set=${CPP+set}
1.6656 +-ac_cv_env_CPP_value=$CPP
1.6657 ++if test ! -r "$srcdir/$ac_unique_file"; then
1.6658 ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
1.6659 ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
1.6660 ++ { (exit 1); exit 1; }; }
1.6661 ++fi
1.6662 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
1.6663 ++ac_abs_confdir=`(
1.6664 ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
1.6665 ++ { (exit 1); exit 1; }; }
1.6666 ++ pwd)`
1.6667 ++# When building in place, set srcdir=.
1.6668 ++if test "$ac_abs_confdir" = "$ac_pwd"; then
1.6669 ++ srcdir=.
1.6670 ++fi
1.6671 ++# Remove unnecessary trailing slashes from srcdir.
1.6672 ++# Double slashes in file names in object file debugging info
1.6673 ++# mess up M-x gdb in Emacs.
1.6674 ++case $srcdir in
1.6675 ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
1.6676 ++esac
1.6677 ++for ac_var in $ac_precious_vars; do
1.6678 ++ eval ac_env_${ac_var}_set=\${${ac_var}+set}
1.6679 ++ eval ac_env_${ac_var}_value=\$${ac_var}
1.6680 ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
1.6681 ++ eval ac_cv_env_${ac_var}_value=\$${ac_var}
1.6682 ++done
1.6683 +
1.6684 + #
1.6685 + # Report the --help message.
1.6686 +@@ -994,9 +1472,6 @@
1.6687 + -n, --no-create do not create output files
1.6688 + --srcdir=DIR find the sources in DIR [configure dir or \`..']
1.6689 +
1.6690 +-_ACEOF
1.6691 +-
1.6692 +- cat <<_ACEOF
1.6693 + Installation directories:
1.6694 + --prefix=PREFIX install architecture-independent files in PREFIX
1.6695 + [$ac_default_prefix]
1.6696 +@@ -1014,15 +1489,22 @@
1.6697 + --bindir=DIR user executables [EPREFIX/bin]
1.6698 + --sbindir=DIR system admin executables [EPREFIX/sbin]
1.6699 + --libexecdir=DIR program executables [EPREFIX/libexec]
1.6700 +- --datadir=DIR read-only architecture-independent data [PREFIX/share]
1.6701 + --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
1.6702 + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
1.6703 + --localstatedir=DIR modifiable single-machine data [PREFIX/var]
1.6704 + --libdir=DIR object code libraries [EPREFIX/lib]
1.6705 + --includedir=DIR C header files [PREFIX/include]
1.6706 + --oldincludedir=DIR C header files for non-gcc [/usr/include]
1.6707 +- --infodir=DIR info documentation [PREFIX/info]
1.6708 +- --mandir=DIR man documentation [PREFIX/man]
1.6709 ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
1.6710 ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
1.6711 ++ --infodir=DIR info documentation [DATAROOTDIR/info]
1.6712 ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
1.6713 ++ --mandir=DIR man documentation [DATAROOTDIR/man]
1.6714 ++ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib]
1.6715 ++ --htmldir=DIR html documentation [DOCDIR]
1.6716 ++ --dvidir=DIR dvi documentation [DOCDIR]
1.6717 ++ --pdfdir=DIR pdf documentation [DOCDIR]
1.6718 ++ --psdir=DIR ps documentation [DOCDIR]
1.6719 + _ACEOF
1.6720 +
1.6721 + cat <<\_ACEOF
1.6722 +@@ -1059,10 +1541,8 @@
1.6723 + --enable-dependency-tracking do not reject slow dependency extractors
1.6724 + --enable-maintainer-mode enable make rules and dependencies not useful
1.6725 + (and sometimes confusing) to the casual installer
1.6726 +- --enable-shared[=PKGS]
1.6727 +- build shared libraries [default=yes]
1.6728 +- --enable-static[=PKGS]
1.6729 +- build static libraries [default=yes]
1.6730 ++ --enable-shared[=PKGS] build shared libraries [default=yes]
1.6731 ++ --enable-static[=PKGS] build static libraries [default=yes]
1.6732 + --enable-fast-install[=PKGS]
1.6733 + optimize for fast installation [default=yes]
1.6734 + --disable-libtool-lock avoid locking (might break parallel builds)
1.6735 +@@ -1081,128 +1561,95 @@
1.6736 + CFLAGS C compiler flags
1.6737 + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
1.6738 + nonstandard directory <lib dir>
1.6739 +- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
1.6740 +- headers in a nonstandard directory <include dir>
1.6741 ++ LIBS libraries to pass to the linker, e.g. -l<library>
1.6742 ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
1.6743 ++ you have headers in a nonstandard directory <include dir>
1.6744 + CPP C preprocessor
1.6745 +
1.6746 + Use these variables to override the choices made by `configure' or to help
1.6747 + it to find libraries and programs with nonstandard names/locations.
1.6748 +
1.6749 + _ACEOF
1.6750 ++ac_status=$?
1.6751 + fi
1.6752 +
1.6753 + if test "$ac_init_help" = "recursive"; then
1.6754 + # If there are subdirs, report their specific --help.
1.6755 +- ac_popdir=`pwd`
1.6756 + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
1.6757 +- test -d $ac_dir || continue
1.6758 ++ test -d "$ac_dir" || continue
1.6759 + ac_builddir=.
1.6760 +
1.6761 +-if test "$ac_dir" != .; then
1.6762 ++case "$ac_dir" in
1.6763 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.6764 ++*)
1.6765 + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.6766 +- # A "../" for each directory in $ac_dir_suffix.
1.6767 +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1.6768 +-else
1.6769 +- ac_dir_suffix= ac_top_builddir=
1.6770 +-fi
1.6771 ++ # A ".." for each directory in $ac_dir_suffix.
1.6772 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.6773 ++ case $ac_top_builddir_sub in
1.6774 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.6775 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.6776 ++ esac ;;
1.6777 ++esac
1.6778 ++ac_abs_top_builddir=$ac_pwd
1.6779 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.6780 ++# for backward compatibility:
1.6781 ++ac_top_builddir=$ac_top_build_prefix
1.6782 +
1.6783 + case $srcdir in
1.6784 +- .) # No --srcdir option. We are building in place.
1.6785 ++ .) # We are building in place.
1.6786 + ac_srcdir=.
1.6787 +- if test -z "$ac_top_builddir"; then
1.6788 +- ac_top_srcdir=.
1.6789 +- else
1.6790 +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1.6791 +- fi ;;
1.6792 +- [\\/]* | ?:[\\/]* ) # Absolute path.
1.6793 ++ ac_top_srcdir=$ac_top_builddir_sub
1.6794 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.6795 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.6796 + ac_srcdir=$srcdir$ac_dir_suffix;
1.6797 +- ac_top_srcdir=$srcdir ;;
1.6798 +- *) # Relative path.
1.6799 +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1.6800 +- ac_top_srcdir=$ac_top_builddir$srcdir ;;
1.6801 +-esac
1.6802 +-
1.6803 +-# Do not use `cd foo && pwd` to compute absolute paths, because
1.6804 +-# the directories may not exist.
1.6805 +-case `pwd` in
1.6806 +-.) ac_abs_builddir="$ac_dir";;
1.6807 +-*)
1.6808 +- case "$ac_dir" in
1.6809 +- .) ac_abs_builddir=`pwd`;;
1.6810 +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
1.6811 +- *) ac_abs_builddir=`pwd`/"$ac_dir";;
1.6812 +- esac;;
1.6813 +-esac
1.6814 +-case $ac_abs_builddir in
1.6815 +-.) ac_abs_top_builddir=${ac_top_builddir}.;;
1.6816 +-*)
1.6817 +- case ${ac_top_builddir}. in
1.6818 +- .) ac_abs_top_builddir=$ac_abs_builddir;;
1.6819 +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
1.6820 +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
1.6821 +- esac;;
1.6822 +-esac
1.6823 +-case $ac_abs_builddir in
1.6824 +-.) ac_abs_srcdir=$ac_srcdir;;
1.6825 +-*)
1.6826 +- case $ac_srcdir in
1.6827 +- .) ac_abs_srcdir=$ac_abs_builddir;;
1.6828 +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
1.6829 +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
1.6830 +- esac;;
1.6831 +-esac
1.6832 +-case $ac_abs_builddir in
1.6833 +-.) ac_abs_top_srcdir=$ac_top_srcdir;;
1.6834 +-*)
1.6835 +- case $ac_top_srcdir in
1.6836 +- .) ac_abs_top_srcdir=$ac_abs_builddir;;
1.6837 +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
1.6838 +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
1.6839 +- esac;;
1.6840 ++ ac_top_srcdir=$srcdir
1.6841 ++ ac_abs_top_srcdir=$srcdir ;;
1.6842 ++ *) # Relative name.
1.6843 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.6844 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.6845 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.6846 + esac
1.6847 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.6848 +
1.6849 +- cd $ac_dir
1.6850 +- # Check for guested configure; otherwise get Cygnus style configure.
1.6851 +- if test -f $ac_srcdir/configure.gnu; then
1.6852 +- echo
1.6853 +- $SHELL $ac_srcdir/configure.gnu --help=recursive
1.6854 +- elif test -f $ac_srcdir/configure; then
1.6855 +- echo
1.6856 +- $SHELL $ac_srcdir/configure --help=recursive
1.6857 +- elif test -f $ac_srcdir/configure.ac ||
1.6858 +- test -f $ac_srcdir/configure.in; then
1.6859 +- echo
1.6860 +- $ac_configure --help
1.6861 ++ cd "$ac_dir" || { ac_status=$?; continue; }
1.6862 ++ # Check for guested configure.
1.6863 ++ if test -f "$ac_srcdir/configure.gnu"; then
1.6864 ++ echo &&
1.6865 ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
1.6866 ++ elif test -f "$ac_srcdir/configure"; then
1.6867 ++ echo &&
1.6868 ++ $SHELL "$ac_srcdir/configure" --help=recursive
1.6869 + else
1.6870 + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
1.6871 +- fi
1.6872 +- cd $ac_popdir
1.6873 ++ fi || ac_status=$?
1.6874 ++ cd "$ac_pwd" || { ac_status=$?; break; }
1.6875 + done
1.6876 + fi
1.6877 +
1.6878 +-test -n "$ac_init_help" && exit 0
1.6879 ++test -n "$ac_init_help" && exit $ac_status
1.6880 + if $ac_init_version; then
1.6881 + cat <<\_ACEOF
1.6882 + newlib configure 1.17.0
1.6883 +-generated by GNU Autoconf 2.59
1.6884 ++generated by GNU Autoconf 2.61
1.6885 +
1.6886 +-Copyright (C) 2003 Free Software Foundation, Inc.
1.6887 ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
1.6888 ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.6889 + This configure script is free software; the Free Software Foundation
1.6890 + gives unlimited permission to copy, distribute and modify it.
1.6891 + _ACEOF
1.6892 +- exit 0
1.6893 ++ exit
1.6894 + fi
1.6895 +-exec 5>config.log
1.6896 +-cat >&5 <<_ACEOF
1.6897 ++cat >config.log <<_ACEOF
1.6898 + This file contains any messages produced by compilers while
1.6899 + running configure, to aid debugging if configure makes a mistake.
1.6900 +
1.6901 + It was created by newlib $as_me 1.17.0, which was
1.6902 +-generated by GNU Autoconf 2.59. Invocation command line was
1.6903 ++generated by GNU Autoconf 2.61. Invocation command line was
1.6904 +
1.6905 + $ $0 $@
1.6906 +
1.6907 + _ACEOF
1.6908 ++exec 5>>config.log
1.6909 + {
1.6910 + cat <<_ASUNAME
1.6911 + ## --------- ##
1.6912 +@@ -1221,7 +1668,7 @@
1.6913 + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
1.6914 + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
1.6915 + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
1.6916 +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
1.6917 ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
1.6918 + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
1.6919 + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
1.6920 + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
1.6921 +@@ -1235,6 +1682,7 @@
1.6922 + test -z "$as_dir" && as_dir=.
1.6923 + echo "PATH: $as_dir"
1.6924 + done
1.6925 ++IFS=$as_save_IFS
1.6926 +
1.6927 + } >&5
1.6928 +
1.6929 +@@ -1256,7 +1704,6 @@
1.6930 + ac_configure_args=
1.6931 + ac_configure_args0=
1.6932 + ac_configure_args1=
1.6933 +-ac_sep=
1.6934 + ac_must_keep_next=false
1.6935 + for ac_pass in 1 2
1.6936 + do
1.6937 +@@ -1267,7 +1714,7 @@
1.6938 + -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.6939 + | -silent | --silent | --silen | --sile | --sil)
1.6940 + continue ;;
1.6941 +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
1.6942 ++ *\'*)
1.6943 + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
1.6944 + esac
1.6945 + case $ac_pass in
1.6946 +@@ -1289,9 +1736,7 @@
1.6947 + -* ) ac_must_keep_next=true ;;
1.6948 + esac
1.6949 + fi
1.6950 +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
1.6951 +- # Get rid of the leading space.
1.6952 +- ac_sep=" "
1.6953 ++ ac_configure_args="$ac_configure_args '$ac_arg'"
1.6954 + ;;
1.6955 + esac
1.6956 + done
1.6957 +@@ -1302,8 +1747,8 @@
1.6958 + # When interrupted or exit'd, cleanup temporary files, and complete
1.6959 + # config.log. We remove comments because anyway the quotes in there
1.6960 + # would cause problems or look ugly.
1.6961 +-# WARNING: Be sure not to use single quotes in there, as some shells,
1.6962 +-# such as our DU 5.0 friend, will then `close' the trap.
1.6963 ++# WARNING: Use '\'' to represent an apostrophe within the trap.
1.6964 ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
1.6965 + trap 'exit_status=$?
1.6966 + # Save into config.log some information that might help in debugging.
1.6967 + {
1.6968 +@@ -1316,20 +1761,34 @@
1.6969 + _ASBOX
1.6970 + echo
1.6971 + # The following way of writing the cache mishandles newlines in values,
1.6972 +-{
1.6973 ++(
1.6974 ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
1.6975 ++ eval ac_val=\$$ac_var
1.6976 ++ case $ac_val in #(
1.6977 ++ *${as_nl}*)
1.6978 ++ case $ac_var in #(
1.6979 ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
1.6980 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
1.6981 ++ esac
1.6982 ++ case $ac_var in #(
1.6983 ++ _ | IFS | as_nl) ;; #(
1.6984 ++ *) $as_unset $ac_var ;;
1.6985 ++ esac ;;
1.6986 ++ esac
1.6987 ++ done
1.6988 + (set) 2>&1 |
1.6989 +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
1.6990 +- *ac_space=\ *)
1.6991 ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
1.6992 ++ *${as_nl}ac_space=\ *)
1.6993 + sed -n \
1.6994 +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
1.6995 +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
1.6996 +- ;;
1.6997 ++ "s/'\''/'\''\\\\'\'''\''/g;
1.6998 ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
1.6999 ++ ;; #(
1.7000 + *)
1.7001 +- sed -n \
1.7002 +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1.7003 ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
1.7004 + ;;
1.7005 +- esac;
1.7006 +-}
1.7007 ++ esac |
1.7008 ++ sort
1.7009 ++)
1.7010 + echo
1.7011 +
1.7012 + cat <<\_ASBOX
1.7013 +@@ -1340,22 +1799,28 @@
1.7014 + echo
1.7015 + for ac_var in $ac_subst_vars
1.7016 + do
1.7017 +- eval ac_val=$`echo $ac_var`
1.7018 +- echo "$ac_var='"'"'$ac_val'"'"'"
1.7019 ++ eval ac_val=\$$ac_var
1.7020 ++ case $ac_val in
1.7021 ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
1.7022 ++ esac
1.7023 ++ echo "$ac_var='\''$ac_val'\''"
1.7024 + done | sort
1.7025 + echo
1.7026 +
1.7027 + if test -n "$ac_subst_files"; then
1.7028 + cat <<\_ASBOX
1.7029 +-## ------------- ##
1.7030 +-## Output files. ##
1.7031 +-## ------------- ##
1.7032 ++## ------------------- ##
1.7033 ++## File substitutions. ##
1.7034 ++## ------------------- ##
1.7035 + _ASBOX
1.7036 + echo
1.7037 + for ac_var in $ac_subst_files
1.7038 + do
1.7039 +- eval ac_val=$`echo $ac_var`
1.7040 +- echo "$ac_var='"'"'$ac_val'"'"'"
1.7041 ++ eval ac_val=\$$ac_var
1.7042 ++ case $ac_val in
1.7043 ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
1.7044 ++ esac
1.7045 ++ echo "$ac_var='\''$ac_val'\''"
1.7046 + done | sort
1.7047 + echo
1.7048 + fi
1.7049 +@@ -1367,26 +1832,24 @@
1.7050 + ## ----------- ##
1.7051 + _ASBOX
1.7052 + echo
1.7053 +- sed "/^$/d" confdefs.h | sort
1.7054 ++ cat confdefs.h
1.7055 + echo
1.7056 + fi
1.7057 + test "$ac_signal" != 0 &&
1.7058 + echo "$as_me: caught signal $ac_signal"
1.7059 + echo "$as_me: exit $exit_status"
1.7060 + } >&5
1.7061 +- rm -f core *.core &&
1.7062 +- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
1.7063 ++ rm -f core *.core core.conftest.* &&
1.7064 ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
1.7065 + exit $exit_status
1.7066 +- ' 0
1.7067 ++' 0
1.7068 + for ac_signal in 1 2 13 15; do
1.7069 + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
1.7070 + done
1.7071 + ac_signal=0
1.7072 +
1.7073 + # confdefs.h avoids OS command line length limits that DEFS can exceed.
1.7074 +-rm -rf conftest* confdefs.h
1.7075 +-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
1.7076 +-echo >confdefs.h
1.7077 ++rm -f -r conftest* confdefs.h
1.7078 +
1.7079 + # Predefined preprocessor variables.
1.7080 +
1.7081 +@@ -1417,14 +1880,17 @@
1.7082 +
1.7083 + # Let the site file select an alternate cache file if it wants to.
1.7084 + # Prefer explicitly selected file to automatically selected ones.
1.7085 +-if test -z "$CONFIG_SITE"; then
1.7086 +- if test "x$prefix" != xNONE; then
1.7087 +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
1.7088 +- else
1.7089 +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
1.7090 +- fi
1.7091 ++if test -n "$CONFIG_SITE"; then
1.7092 ++ set x "$CONFIG_SITE"
1.7093 ++elif test "x$prefix" != xNONE; then
1.7094 ++ set x "$prefix/share/config.site" "$prefix/etc/config.site"
1.7095 ++else
1.7096 ++ set x "$ac_default_prefix/share/config.site" \
1.7097 ++ "$ac_default_prefix/etc/config.site"
1.7098 + fi
1.7099 +-for ac_site_file in $CONFIG_SITE; do
1.7100 ++shift
1.7101 ++for ac_site_file
1.7102 ++do
1.7103 + if test -r "$ac_site_file"; then
1.7104 + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
1.7105 + echo "$as_me: loading site script $ac_site_file" >&6;}
1.7106 +@@ -1440,8 +1906,8 @@
1.7107 + { echo "$as_me:$LINENO: loading cache $cache_file" >&5
1.7108 + echo "$as_me: loading cache $cache_file" >&6;}
1.7109 + case $cache_file in
1.7110 +- [\\/]* | ?:[\\/]* ) . $cache_file;;
1.7111 +- *) . ./$cache_file;;
1.7112 ++ [\\/]* | ?:[\\/]* ) . "$cache_file";;
1.7113 ++ *) . "./$cache_file";;
1.7114 + esac
1.7115 + fi
1.7116 + else
1.7117 +@@ -1453,12 +1919,11 @@
1.7118 + # Check that the precious variables saved in the cache have kept the same
1.7119 + # value.
1.7120 + ac_cache_corrupted=false
1.7121 +-for ac_var in `(set) 2>&1 |
1.7122 +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
1.7123 ++for ac_var in $ac_precious_vars; do
1.7124 + eval ac_old_set=\$ac_cv_env_${ac_var}_set
1.7125 + eval ac_new_set=\$ac_env_${ac_var}_set
1.7126 +- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
1.7127 +- eval ac_new_val="\$ac_env_${ac_var}_value"
1.7128 ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value
1.7129 ++ eval ac_new_val=\$ac_env_${ac_var}_value
1.7130 + case $ac_old_set,$ac_new_set in
1.7131 + set,)
1.7132 + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
1.7133 +@@ -1483,8 +1948,7 @@
1.7134 + # Pass precious variables to config.status.
1.7135 + if test "$ac_new_set" = set; then
1.7136 + case $ac_new_val in
1.7137 +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
1.7138 +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1.7139 ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1.7140 + *) ac_arg=$ac_var=$ac_new_val ;;
1.7141 + esac
1.7142 + case " $ac_configure_args " in
1.7143 +@@ -1501,12 +1965,6 @@
1.7144 + { (exit 1); exit 1; }; }
1.7145 + fi
1.7146 +
1.7147 +-ac_ext=c
1.7148 +-ac_cpp='$CPP $CPPFLAGS'
1.7149 +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.7150 +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1.7151 +-ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.7152 +-
1.7153 +
1.7154 +
1.7155 +
1.7156 +@@ -1531,67 +1989,92 @@
1.7157 +
1.7158 +
1.7159 +
1.7160 ++ac_ext=c
1.7161 ++ac_cpp='$CPP $CPPFLAGS'
1.7162 ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.7163 ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1.7164 ++ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.7165 +
1.7166 +
1.7167 +
1.7168 +
1.7169 + ac_aux_dir=
1.7170 +-for ac_dir in ../../.. $srcdir/../../..; do
1.7171 +- if test -f $ac_dir/install-sh; then
1.7172 ++for ac_dir in ../../.. "$srcdir"/../../..; do
1.7173 ++ if test -f "$ac_dir/install-sh"; then
1.7174 + ac_aux_dir=$ac_dir
1.7175 + ac_install_sh="$ac_aux_dir/install-sh -c"
1.7176 + break
1.7177 +- elif test -f $ac_dir/install.sh; then
1.7178 ++ elif test -f "$ac_dir/install.sh"; then
1.7179 + ac_aux_dir=$ac_dir
1.7180 + ac_install_sh="$ac_aux_dir/install.sh -c"
1.7181 + break
1.7182 +- elif test -f $ac_dir/shtool; then
1.7183 ++ elif test -f "$ac_dir/shtool"; then
1.7184 + ac_aux_dir=$ac_dir
1.7185 + ac_install_sh="$ac_aux_dir/shtool install -c"
1.7186 + break
1.7187 + fi
1.7188 + done
1.7189 + if test -z "$ac_aux_dir"; then
1.7190 +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5
1.7191 +-echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;}
1.7192 ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5
1.7193 ++echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;}
1.7194 + { (exit 1); exit 1; }; }
1.7195 + fi
1.7196 +-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
1.7197 +-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
1.7198 +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
1.7199 ++
1.7200 ++# These three variables are undocumented and unsupported,
1.7201 ++# and are intended to be withdrawn in a future Autoconf release.
1.7202 ++# They can cause serious problems if a builder's source tree is in a directory
1.7203 ++# whose full name contains unusual characters.
1.7204 ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
1.7205 ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
1.7206 ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
1.7207 ++
1.7208 +
1.7209 +
1.7210 +
1.7211 + # Make sure we can run config.sub.
1.7212 +-$ac_config_sub sun4 >/dev/null 2>&1 ||
1.7213 +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
1.7214 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
1.7215 ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
1.7216 ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
1.7217 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
1.7218 + { (exit 1); exit 1; }; }
1.7219 +
1.7220 +-echo "$as_me:$LINENO: checking build system type" >&5
1.7221 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6
1.7222 ++{ echo "$as_me:$LINENO: checking build system type" >&5
1.7223 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
1.7224 + if test "${ac_cv_build+set}" = set; then
1.7225 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7226 + else
1.7227 +- ac_cv_build_alias=$build_alias
1.7228 +-test -z "$ac_cv_build_alias" &&
1.7229 +- ac_cv_build_alias=`$ac_config_guess`
1.7230 +-test -z "$ac_cv_build_alias" &&
1.7231 ++ ac_build_alias=$build_alias
1.7232 ++test "x$ac_build_alias" = x &&
1.7233 ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
1.7234 ++test "x$ac_build_alias" = x &&
1.7235 + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
1.7236 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
1.7237 + { (exit 1); exit 1; }; }
1.7238 +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
1.7239 +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
1.7240 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
1.7241 ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
1.7242 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
1.7243 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
1.7244 + { (exit 1); exit 1; }; }
1.7245 +
1.7246 + fi
1.7247 +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1.7248 +-echo "${ECHO_T}$ac_cv_build" >&6
1.7249 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1.7250 ++echo "${ECHO_T}$ac_cv_build" >&6; }
1.7251 ++case $ac_cv_build in
1.7252 ++*-*-*) ;;
1.7253 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
1.7254 ++echo "$as_me: error: invalid value of canonical build" >&2;}
1.7255 ++ { (exit 1); exit 1; }; };;
1.7256 ++esac
1.7257 + build=$ac_cv_build
1.7258 +-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1.7259 +-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1.7260 +-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1.7261 ++ac_save_IFS=$IFS; IFS='-'
1.7262 ++set x $ac_cv_build
1.7263 ++shift
1.7264 ++build_cpu=$1
1.7265 ++build_vendor=$2
1.7266 ++shift; shift
1.7267 ++# Remember, the first character of IFS is used to create $*,
1.7268 ++# except with old shells:
1.7269 ++build_os=$*
1.7270 ++IFS=$ac_save_IFS
1.7271 ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
1.7272 +
1.7273 +
1.7274 + am__api_version="1.9"
1.7275 +@@ -1608,8 +2091,8 @@
1.7276 + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1.7277 + # OS/2's system install, which has a completely different semantic
1.7278 + # ./install, which can be erroneously created by make from ./install.sh.
1.7279 +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.7280 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
1.7281 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.7282 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
1.7283 + if test -z "$INSTALL"; then
1.7284 + if test "${ac_cv_path_install+set}" = set; then
1.7285 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7286 +@@ -1631,7 +2114,7 @@
1.7287 + # by default.
1.7288 + for ac_prog in ginstall scoinst install; do
1.7289 + for ac_exec_ext in '' $ac_executable_extensions; do
1.7290 +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
1.7291 ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
1.7292 + if test $ac_prog = install &&
1.7293 + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.7294 + # AIX install. It has an incompatible calling convention.
1.7295 +@@ -1650,21 +2133,22 @@
1.7296 + ;;
1.7297 + esac
1.7298 + done
1.7299 ++IFS=$as_save_IFS
1.7300 +
1.7301 +
1.7302 + fi
1.7303 + if test "${ac_cv_path_install+set}" = set; then
1.7304 + INSTALL=$ac_cv_path_install
1.7305 + else
1.7306 +- # As a last resort, use the slow shell script. We don't cache a
1.7307 +- # path for INSTALL within a source directory, because that will
1.7308 ++ # As a last resort, use the slow shell script. Don't cache a
1.7309 ++ # value for INSTALL within a source directory, because that will
1.7310 + # break other packages using the cache if that directory is
1.7311 +- # removed, or if the path is relative.
1.7312 ++ # removed, or if the value is a relative name.
1.7313 + INSTALL=$ac_install_sh
1.7314 + fi
1.7315 + fi
1.7316 +-echo "$as_me:$LINENO: result: $INSTALL" >&5
1.7317 +-echo "${ECHO_T}$INSTALL" >&6
1.7318 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
1.7319 ++echo "${ECHO_T}$INSTALL" >&6; }
1.7320 +
1.7321 + # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1.7322 + # It thinks the first close brace ends the variable substitution.
1.7323 +@@ -1674,8 +2158,8 @@
1.7324 +
1.7325 + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1.7326 +
1.7327 +-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
1.7328 +-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
1.7329 ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
1.7330 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
1.7331 + # Just in case
1.7332 + sleep 1
1.7333 + echo timestamp > conftest.file
1.7334 +@@ -1717,20 +2201,20 @@
1.7335 + Check your system clock" >&2;}
1.7336 + { (exit 1); exit 1; }; }
1.7337 + fi
1.7338 +-echo "$as_me:$LINENO: result: yes" >&5
1.7339 +-echo "${ECHO_T}yes" >&6
1.7340 ++{ echo "$as_me:$LINENO: result: yes" >&5
1.7341 ++echo "${ECHO_T}yes" >&6; }
1.7342 + test "$program_prefix" != NONE &&
1.7343 +- program_transform_name="s,^,$program_prefix,;$program_transform_name"
1.7344 ++ program_transform_name="s&^&$program_prefix&;$program_transform_name"
1.7345 + # Use a double $ so make ignores it.
1.7346 + test "$program_suffix" != NONE &&
1.7347 +- program_transform_name="s,\$,$program_suffix,;$program_transform_name"
1.7348 ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
1.7349 + # Double any \ or $. echo might interpret backslashes.
1.7350 + # By default was `s,x,x', remove it if useless.
1.7351 + cat <<\_ACEOF >conftest.sed
1.7352 + s/[\\$]/&&/g;s/;s,x,x,$//
1.7353 + _ACEOF
1.7354 + program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
1.7355 +-rm conftest.sed
1.7356 ++rm -f conftest.sed
1.7357 +
1.7358 + # expand $ac_aux_dir to an absolute path
1.7359 + am_aux_dir=`cd $ac_aux_dir && pwd`
1.7360 +@@ -1782,8 +2266,8 @@
1.7361 + do
1.7362 + # Extract the first word of "$ac_prog", so it can be a program name with args.
1.7363 + set dummy $ac_prog; ac_word=$2
1.7364 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7365 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.7366 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7367 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.7368 + if test "${ac_cv_prog_AWK+set}" = set; then
1.7369 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7370 + else
1.7371 +@@ -1796,54 +2280,57 @@
1.7372 + IFS=$as_save_IFS
1.7373 + test -z "$as_dir" && as_dir=.
1.7374 + for ac_exec_ext in '' $ac_executable_extensions; do
1.7375 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.7376 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.7377 + ac_cv_prog_AWK="$ac_prog"
1.7378 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.7379 + break 2
1.7380 + fi
1.7381 + done
1.7382 + done
1.7383 ++IFS=$as_save_IFS
1.7384 +
1.7385 + fi
1.7386 + fi
1.7387 + AWK=$ac_cv_prog_AWK
1.7388 + if test -n "$AWK"; then
1.7389 +- echo "$as_me:$LINENO: result: $AWK" >&5
1.7390 +-echo "${ECHO_T}$AWK" >&6
1.7391 ++ { echo "$as_me:$LINENO: result: $AWK" >&5
1.7392 ++echo "${ECHO_T}$AWK" >&6; }
1.7393 + else
1.7394 +- echo "$as_me:$LINENO: result: no" >&5
1.7395 +-echo "${ECHO_T}no" >&6
1.7396 ++ { echo "$as_me:$LINENO: result: no" >&5
1.7397 ++echo "${ECHO_T}no" >&6; }
1.7398 + fi
1.7399 +
1.7400 ++
1.7401 + test -n "$AWK" && break
1.7402 + done
1.7403 +
1.7404 +-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
1.7405 +-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
1.7406 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
1.7407 +-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
1.7408 ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
1.7409 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
1.7410 ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
1.7411 ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
1.7412 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7413 + else
1.7414 + cat >conftest.make <<\_ACEOF
1.7415 ++SHELL = /bin/sh
1.7416 + all:
1.7417 +- @echo 'ac_maketemp="$(MAKE)"'
1.7418 ++ @echo '@@@%%%=$(MAKE)=@@@%%%'
1.7419 + _ACEOF
1.7420 + # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
1.7421 +-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
1.7422 +-if test -n "$ac_maketemp"; then
1.7423 +- eval ac_cv_prog_make_${ac_make}_set=yes
1.7424 +-else
1.7425 +- eval ac_cv_prog_make_${ac_make}_set=no
1.7426 +-fi
1.7427 ++case `${MAKE-make} -f conftest.make 2>/dev/null` in
1.7428 ++ *@@@%%%=?*=@@@%%%*)
1.7429 ++ eval ac_cv_prog_make_${ac_make}_set=yes;;
1.7430 ++ *)
1.7431 ++ eval ac_cv_prog_make_${ac_make}_set=no;;
1.7432 ++esac
1.7433 + rm -f conftest.make
1.7434 + fi
1.7435 +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
1.7436 +- echo "$as_me:$LINENO: result: yes" >&5
1.7437 +-echo "${ECHO_T}yes" >&6
1.7438 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
1.7439 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.7440 ++echo "${ECHO_T}yes" >&6; }
1.7441 + SET_MAKE=
1.7442 + else
1.7443 +- echo "$as_me:$LINENO: result: no" >&5
1.7444 +-echo "${ECHO_T}no" >&6
1.7445 ++ { echo "$as_me:$LINENO: result: no" >&5
1.7446 ++echo "${ECHO_T}no" >&6; }
1.7447 + SET_MAKE="MAKE=${MAKE-make}"
1.7448 + fi
1.7449 +
1.7450 +@@ -1858,7 +2345,7 @@
1.7451 +
1.7452 + DEPDIR="${am__leading_dot}deps"
1.7453 +
1.7454 +- ac_config_commands="$ac_config_commands depfiles"
1.7455 ++ac_config_commands="$ac_config_commands depfiles"
1.7456 +
1.7457 +
1.7458 + am_make=${MAKE-make}
1.7459 +@@ -1868,8 +2355,8 @@
1.7460 + .PHONY: am__doit
1.7461 + END
1.7462 + # If we don't find an include directive, just comment out the code.
1.7463 +-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
1.7464 +-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
1.7465 ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
1.7466 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
1.7467 + am__include="#"
1.7468 + am__quote=
1.7469 + _am_result=none
1.7470 +@@ -1896,15 +2383,15 @@
1.7471 + fi
1.7472 +
1.7473 +
1.7474 +-echo "$as_me:$LINENO: result: $_am_result" >&5
1.7475 +-echo "${ECHO_T}$_am_result" >&6
1.7476 ++{ echo "$as_me:$LINENO: result: $_am_result" >&5
1.7477 ++echo "${ECHO_T}$_am_result" >&6; }
1.7478 + rm -f confinc confmf
1.7479 +
1.7480 +-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
1.7481 ++# Check whether --enable-dependency-tracking was given.
1.7482 + if test "${enable_dependency_tracking+set}" = set; then
1.7483 +- enableval="$enable_dependency_tracking"
1.7484 ++ enableval=$enable_dependency_tracking;
1.7485 ++fi
1.7486 +
1.7487 +-fi;
1.7488 + if test "x$enable_dependency_tracking" != xno; then
1.7489 + am_depcomp="$ac_aux_dir/depcomp"
1.7490 + AMDEPBACKSLASH='\'
1.7491 +@@ -1922,10 +2409,9 @@
1.7492 +
1.7493 +
1.7494 +
1.7495 +-# Check whether --enable-multilib or --disable-multilib was given.
1.7496 ++# Check whether --enable-multilib was given.
1.7497 + if test "${enable_multilib+set}" = set; then
1.7498 +- enableval="$enable_multilib"
1.7499 +- case "${enableval}" in
1.7500 ++ enableval=$enable_multilib; case "${enableval}" in
1.7501 + yes) multilib=yes ;;
1.7502 + no) multilib=no ;;
1.7503 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
1.7504 +@@ -1934,11 +2420,11 @@
1.7505 + esac
1.7506 + else
1.7507 + multilib=yes
1.7508 +-fi;
1.7509 +-# Check whether --enable-target-optspace or --disable-target-optspace was given.
1.7510 ++fi
1.7511 ++
1.7512 ++# Check whether --enable-target-optspace was given.
1.7513 + if test "${enable_target_optspace+set}" = set; then
1.7514 +- enableval="$enable_target_optspace"
1.7515 +- case "${enableval}" in
1.7516 ++ enableval=$enable_target_optspace; case "${enableval}" in
1.7517 + yes) target_optspace=yes ;;
1.7518 + no) target_optspace=no ;;
1.7519 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
1.7520 +@@ -1947,11 +2433,11 @@
1.7521 + esac
1.7522 + else
1.7523 + target_optspace=
1.7524 +-fi;
1.7525 +-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
1.7526 ++fi
1.7527 ++
1.7528 ++# Check whether --enable-malloc-debugging was given.
1.7529 + if test "${enable_malloc_debugging+set}" = set; then
1.7530 +- enableval="$enable_malloc_debugging"
1.7531 +- case "${enableval}" in
1.7532 ++ enableval=$enable_malloc_debugging; case "${enableval}" in
1.7533 + yes) malloc_debugging=yes ;;
1.7534 + no) malloc_debugging=no ;;
1.7535 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
1.7536 +@@ -1960,11 +2446,11 @@
1.7537 + esac
1.7538 + else
1.7539 + malloc_debugging=
1.7540 +-fi;
1.7541 +-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
1.7542 ++fi
1.7543 ++
1.7544 ++# Check whether --enable-newlib-multithread was given.
1.7545 + if test "${enable_newlib_multithread+set}" = set; then
1.7546 +- enableval="$enable_newlib_multithread"
1.7547 +- case "${enableval}" in
1.7548 ++ enableval=$enable_newlib_multithread; case "${enableval}" in
1.7549 + yes) newlib_multithread=yes ;;
1.7550 + no) newlib_multithread=no ;;
1.7551 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
1.7552 +@@ -1973,11 +2459,11 @@
1.7553 + esac
1.7554 + else
1.7555 + newlib_multithread=yes
1.7556 +-fi;
1.7557 +-# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given.
1.7558 ++fi
1.7559 ++
1.7560 ++# Check whether --enable-newlib-iconv was given.
1.7561 + if test "${enable_newlib_iconv+set}" = set; then
1.7562 +- enableval="$enable_newlib_iconv"
1.7563 +- if test "${newlib_iconv+set}" != set; then
1.7564 ++ enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
1.7565 + case "${enableval}" in
1.7566 + yes) newlib_iconv=yes ;;
1.7567 + no) newlib_iconv=no ;;
1.7568 +@@ -1988,11 +2474,11 @@
1.7569 + fi
1.7570 + else
1.7571 + newlib_iconv=${newlib_iconv}
1.7572 +-fi;
1.7573 +-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
1.7574 ++fi
1.7575 ++
1.7576 ++# Check whether --enable-newlib-elix-level was given.
1.7577 + if test "${enable_newlib_elix_level+set}" = set; then
1.7578 +- enableval="$enable_newlib_elix_level"
1.7579 +- case "${enableval}" in
1.7580 ++ enableval=$enable_newlib_elix_level; case "${enableval}" in
1.7581 + 0) newlib_elix_level=0 ;;
1.7582 + 1) newlib_elix_level=1 ;;
1.7583 + 2) newlib_elix_level=2 ;;
1.7584 +@@ -2004,11 +2490,11 @@
1.7585 + esac
1.7586 + else
1.7587 + newlib_elix_level=0
1.7588 +-fi;
1.7589 +-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
1.7590 ++fi
1.7591 ++
1.7592 ++# Check whether --enable-newlib-io-float was given.
1.7593 + if test "${enable_newlib_io_float+set}" = set; then
1.7594 +- enableval="$enable_newlib_io_float"
1.7595 +- case "${enableval}" in
1.7596 ++ enableval=$enable_newlib_io_float; case "${enableval}" in
1.7597 + yes) newlib_io_float=yes ;;
1.7598 + no) newlib_io_float=no ;;
1.7599 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
1.7600 +@@ -2017,11 +2503,11 @@
1.7601 + esac
1.7602 + else
1.7603 + newlib_io_float=yes
1.7604 +-fi;
1.7605 +-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
1.7606 ++fi
1.7607 ++
1.7608 ++# Check whether --enable-newlib-supplied-syscalls was given.
1.7609 + if test "${enable_newlib_supplied_syscalls+set}" = set; then
1.7610 +- enableval="$enable_newlib_supplied_syscalls"
1.7611 +- case "${enableval}" in
1.7612 ++ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
1.7613 + yes) newlib_may_supply_syscalls=yes ;;
1.7614 + no) newlib_may_supply_syscalls=no ;;
1.7615 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
1.7616 +@@ -2030,7 +2516,8 @@
1.7617 + esac
1.7618 + else
1.7619 + newlib_may_supply_syscalls=yes
1.7620 +-fi;
1.7621 ++fi
1.7622 ++
1.7623 +
1.7624 +
1.7625 + if test x${newlib_may_supply_syscalls} = xyes; then
1.7626 +@@ -2056,26 +2543,41 @@
1.7627 + fi
1.7628 +
1.7629 +
1.7630 +-echo "$as_me:$LINENO: checking host system type" >&5
1.7631 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6
1.7632 ++{ echo "$as_me:$LINENO: checking host system type" >&5
1.7633 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
1.7634 + if test "${ac_cv_host+set}" = set; then
1.7635 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7636 + else
1.7637 +- ac_cv_host_alias=$host_alias
1.7638 +-test -z "$ac_cv_host_alias" &&
1.7639 +- ac_cv_host_alias=$ac_cv_build_alias
1.7640 +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
1.7641 +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
1.7642 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
1.7643 ++ if test "x$host_alias" = x; then
1.7644 ++ ac_cv_host=$ac_cv_build
1.7645 ++else
1.7646 ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
1.7647 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
1.7648 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
1.7649 + { (exit 1); exit 1; }; }
1.7650 ++fi
1.7651 +
1.7652 + fi
1.7653 +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1.7654 +-echo "${ECHO_T}$ac_cv_host" >&6
1.7655 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1.7656 ++echo "${ECHO_T}$ac_cv_host" >&6; }
1.7657 ++case $ac_cv_host in
1.7658 ++*-*-*) ;;
1.7659 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
1.7660 ++echo "$as_me: error: invalid value of canonical host" >&2;}
1.7661 ++ { (exit 1); exit 1; }; };;
1.7662 ++esac
1.7663 + host=$ac_cv_host
1.7664 +-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1.7665 +-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1.7666 +-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1.7667 ++ac_save_IFS=$IFS; IFS='-'
1.7668 ++set x $ac_cv_host
1.7669 ++shift
1.7670 ++host_cpu=$1
1.7671 ++host_vendor=$2
1.7672 ++shift; shift
1.7673 ++# Remember, the first character of IFS is used to create $*,
1.7674 ++# except with old shells:
1.7675 ++host_os=$*
1.7676 ++IFS=$ac_save_IFS
1.7677 ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
1.7678 +
1.7679 +
1.7680 +
1.7681 +@@ -2128,8 +2630,8 @@
1.7682 + if test -n "$ac_tool_prefix"; then
1.7683 + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
1.7684 + set dummy ${ac_tool_prefix}strip; ac_word=$2
1.7685 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7686 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.7687 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7688 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.7689 + if test "${ac_cv_prog_STRIP+set}" = set; then
1.7690 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7691 + else
1.7692 +@@ -2142,32 +2644,34 @@
1.7693 + IFS=$as_save_IFS
1.7694 + test -z "$as_dir" && as_dir=.
1.7695 + for ac_exec_ext in '' $ac_executable_extensions; do
1.7696 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.7697 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.7698 + ac_cv_prog_STRIP="${ac_tool_prefix}strip"
1.7699 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.7700 + break 2
1.7701 + fi
1.7702 + done
1.7703 + done
1.7704 ++IFS=$as_save_IFS
1.7705 +
1.7706 + fi
1.7707 + fi
1.7708 + STRIP=$ac_cv_prog_STRIP
1.7709 + if test -n "$STRIP"; then
1.7710 +- echo "$as_me:$LINENO: result: $STRIP" >&5
1.7711 +-echo "${ECHO_T}$STRIP" >&6
1.7712 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5
1.7713 ++echo "${ECHO_T}$STRIP" >&6; }
1.7714 + else
1.7715 +- echo "$as_me:$LINENO: result: no" >&5
1.7716 +-echo "${ECHO_T}no" >&6
1.7717 ++ { echo "$as_me:$LINENO: result: no" >&5
1.7718 ++echo "${ECHO_T}no" >&6; }
1.7719 + fi
1.7720 +
1.7721 ++
1.7722 + fi
1.7723 + if test -z "$ac_cv_prog_STRIP"; then
1.7724 + ac_ct_STRIP=$STRIP
1.7725 + # Extract the first word of "strip", so it can be a program name with args.
1.7726 + set dummy strip; ac_word=$2
1.7727 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7728 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.7729 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7730 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.7731 + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
1.7732 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7733 + else
1.7734 +@@ -2180,27 +2684,41 @@
1.7735 + IFS=$as_save_IFS
1.7736 + test -z "$as_dir" && as_dir=.
1.7737 + for ac_exec_ext in '' $ac_executable_extensions; do
1.7738 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.7739 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.7740 + ac_cv_prog_ac_ct_STRIP="strip"
1.7741 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.7742 + break 2
1.7743 + fi
1.7744 + done
1.7745 + done
1.7746 ++IFS=$as_save_IFS
1.7747 +
1.7748 +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
1.7749 + fi
1.7750 + fi
1.7751 + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
1.7752 + if test -n "$ac_ct_STRIP"; then
1.7753 +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
1.7754 +-echo "${ECHO_T}$ac_ct_STRIP" >&6
1.7755 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
1.7756 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; }
1.7757 + else
1.7758 +- echo "$as_me:$LINENO: result: no" >&5
1.7759 +-echo "${ECHO_T}no" >&6
1.7760 ++ { echo "$as_me:$LINENO: result: no" >&5
1.7761 ++echo "${ECHO_T}no" >&6; }
1.7762 + fi
1.7763 +
1.7764 +- STRIP=$ac_ct_STRIP
1.7765 ++ if test "x$ac_ct_STRIP" = x; then
1.7766 ++ STRIP=":"
1.7767 ++ else
1.7768 ++ case $cross_compiling:$ac_tool_warned in
1.7769 ++yes:)
1.7770 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.7771 ++whose name does not start with the host triplet. If you think this
1.7772 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.7773 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.7774 ++whose name does not start with the host triplet. If you think this
1.7775 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.7776 ++ac_tool_warned=yes ;;
1.7777 ++esac
1.7778 ++ STRIP=$ac_ct_STRIP
1.7779 ++ fi
1.7780 + else
1.7781 + STRIP="$ac_cv_prog_STRIP"
1.7782 + fi
1.7783 +@@ -2235,8 +2753,8 @@
1.7784 +
1.7785 + # Extract the first word of "gcc", so it can be a program name with args.
1.7786 + set dummy gcc; ac_word=$2
1.7787 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7788 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.7789 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7790 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.7791 + if test "${ac_cv_prog_CC+set}" = set; then
1.7792 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7793 + else
1.7794 +@@ -2249,30 +2767,32 @@
1.7795 + IFS=$as_save_IFS
1.7796 + test -z "$as_dir" && as_dir=.
1.7797 + for ac_exec_ext in '' $ac_executable_extensions; do
1.7798 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.7799 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.7800 + ac_cv_prog_CC="gcc"
1.7801 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.7802 + break 2
1.7803 + fi
1.7804 + done
1.7805 + done
1.7806 ++IFS=$as_save_IFS
1.7807 +
1.7808 + fi
1.7809 + fi
1.7810 + CC=$ac_cv_prog_CC
1.7811 + if test -n "$CC"; then
1.7812 +- echo "$as_me:$LINENO: result: $CC" >&5
1.7813 +-echo "${ECHO_T}$CC" >&6
1.7814 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.7815 ++echo "${ECHO_T}$CC" >&6; }
1.7816 + else
1.7817 +- echo "$as_me:$LINENO: result: no" >&5
1.7818 +-echo "${ECHO_T}no" >&6
1.7819 ++ { echo "$as_me:$LINENO: result: no" >&5
1.7820 ++echo "${ECHO_T}no" >&6; }
1.7821 + fi
1.7822 +
1.7823 +
1.7824 ++
1.7825 + depcc="$CC" am_compiler_list=
1.7826 +
1.7827 +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
1.7828 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
1.7829 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
1.7830 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
1.7831 + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
1.7832 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7833 + else
1.7834 +@@ -2361,8 +2881,8 @@
1.7835 + fi
1.7836 +
1.7837 + fi
1.7838 +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
1.7839 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
1.7840 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
1.7841 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
1.7842 + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
1.7843 +
1.7844 +
1.7845 +@@ -2381,8 +2901,8 @@
1.7846 + if test -z "$CC"; then
1.7847 + # Extract the first word of "cc", so it can be a program name with args.
1.7848 + set dummy cc; ac_word=$2
1.7849 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7850 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.7851 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.7852 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.7853 + if test "${ac_cv_prog_CC+set}" = set; then
1.7854 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7855 + else
1.7856 +@@ -2396,7 +2916,7 @@
1.7857 + IFS=$as_save_IFS
1.7858 + test -z "$as_dir" && as_dir=.
1.7859 + for ac_exec_ext in '' $ac_executable_extensions; do
1.7860 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.7861 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.7862 + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
1.7863 + ac_prog_rejected=yes
1.7864 + continue
1.7865 +@@ -2407,6 +2927,7 @@
1.7866 + fi
1.7867 + done
1.7868 + done
1.7869 ++IFS=$as_save_IFS
1.7870 +
1.7871 + if test $ac_prog_rejected = yes; then
1.7872 + # We found a bogon in the path, so make sure we never use it.
1.7873 +@@ -2424,20 +2945,21 @@
1.7874 + fi
1.7875 + CC=$ac_cv_prog_CC
1.7876 + if test -n "$CC"; then
1.7877 +- echo "$as_me:$LINENO: result: $CC" >&5
1.7878 +-echo "${ECHO_T}$CC" >&6
1.7879 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.7880 ++echo "${ECHO_T}$CC" >&6; }
1.7881 + else
1.7882 +- echo "$as_me:$LINENO: result: no" >&5
1.7883 +-echo "${ECHO_T}no" >&6
1.7884 ++ { echo "$as_me:$LINENO: result: no" >&5
1.7885 ++echo "${ECHO_T}no" >&6; }
1.7886 + fi
1.7887 +
1.7888 ++
1.7889 + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
1.7890 + echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
1.7891 + { (exit 1); exit 1; }; }
1.7892 + fi
1.7893 +
1.7894 +-echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
1.7895 +-echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6
1.7896 ++{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
1.7897 ++echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; }
1.7898 + if test "${ac_cv_c_compiler_gnu+set}" = set; then
1.7899 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7900 + else
1.7901 +@@ -2457,8 +2979,8 @@
1.7902 + ac_cv_c_compiler_gnu=no
1.7903 + fi
1.7904 + fi
1.7905 +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
1.7906 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
1.7907 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
1.7908 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
1.7909 +
1.7910 + if test $ac_cv_c_compiler_gnu = yes; then
1.7911 + GCC=yes
1.7912 +@@ -2467,13 +2989,16 @@
1.7913 + CFLAGS=
1.7914 + ac_test_CFLAGS=${CFLAGS+set}
1.7915 + ac_save_CFLAGS=$CFLAGS
1.7916 +-CFLAGS="-g"
1.7917 +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
1.7918 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
1.7919 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
1.7920 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
1.7921 + if test "${ac_cv_prog_cc_g+set}" = set; then
1.7922 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.7923 + else
1.7924 +- cat >conftest.$ac_ext <<_ACEOF
1.7925 ++ ac_save_c_werror_flag=$ac_c_werror_flag
1.7926 ++ ac_c_werror_flag=yes
1.7927 ++ ac_cv_prog_cc_g=no
1.7928 ++ CFLAGS="-g"
1.7929 ++ cat >conftest.$ac_ext <<_ACEOF
1.7930 + /* confdefs.h. */
1.7931 + _ACEOF
1.7932 + cat confdefs.h >>conftest.$ac_ext
1.7933 +@@ -2489,38 +3014,118 @@
1.7934 + }
1.7935 + _ACEOF
1.7936 + rm -f conftest.$ac_objext
1.7937 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.7938 +- (eval $ac_compile) 2>conftest.er1
1.7939 ++if { (ac_try="$ac_compile"
1.7940 ++case "(($ac_try" in
1.7941 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.7942 ++ *) ac_try_echo=$ac_try;;
1.7943 ++esac
1.7944 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.7945 ++ (eval "$ac_compile") 2>conftest.er1
1.7946 + ac_status=$?
1.7947 + grep -v '^ *+' conftest.er1 >conftest.err
1.7948 + rm -f conftest.er1
1.7949 + cat conftest.err >&5
1.7950 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.7951 +- (exit $ac_status); } &&
1.7952 +- { ac_try='test -z "$ac_c_werror_flag"
1.7953 +- || test ! -s conftest.err'
1.7954 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.7955 +- (eval $ac_try) 2>&5
1.7956 ++ (exit $ac_status); } && {
1.7957 ++ test -z "$ac_c_werror_flag" ||
1.7958 ++ test ! -s conftest.err
1.7959 ++ } && test -s conftest.$ac_objext; then
1.7960 ++ ac_cv_prog_cc_g=yes
1.7961 ++else
1.7962 ++ echo "$as_me: failed program was:" >&5
1.7963 ++sed 's/^/| /' conftest.$ac_ext >&5
1.7964 ++
1.7965 ++ CFLAGS=""
1.7966 ++ cat >conftest.$ac_ext <<_ACEOF
1.7967 ++/* confdefs.h. */
1.7968 ++_ACEOF
1.7969 ++cat confdefs.h >>conftest.$ac_ext
1.7970 ++cat >>conftest.$ac_ext <<_ACEOF
1.7971 ++/* end confdefs.h. */
1.7972 ++
1.7973 ++int
1.7974 ++main ()
1.7975 ++{
1.7976 ++
1.7977 ++ ;
1.7978 ++ return 0;
1.7979 ++}
1.7980 ++_ACEOF
1.7981 ++rm -f conftest.$ac_objext
1.7982 ++if { (ac_try="$ac_compile"
1.7983 ++case "(($ac_try" in
1.7984 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.7985 ++ *) ac_try_echo=$ac_try;;
1.7986 ++esac
1.7987 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.7988 ++ (eval "$ac_compile") 2>conftest.er1
1.7989 + ac_status=$?
1.7990 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.7991 ++ rm -f conftest.er1
1.7992 ++ cat conftest.err >&5
1.7993 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.7994 +- (exit $ac_status); }; } &&
1.7995 +- { ac_try='test -s conftest.$ac_objext'
1.7996 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.7997 +- (eval $ac_try) 2>&5
1.7998 ++ (exit $ac_status); } && {
1.7999 ++ test -z "$ac_c_werror_flag" ||
1.8000 ++ test ! -s conftest.err
1.8001 ++ } && test -s conftest.$ac_objext; then
1.8002 ++ :
1.8003 ++else
1.8004 ++ echo "$as_me: failed program was:" >&5
1.8005 ++sed 's/^/| /' conftest.$ac_ext >&5
1.8006 ++
1.8007 ++ ac_c_werror_flag=$ac_save_c_werror_flag
1.8008 ++ CFLAGS="-g"
1.8009 ++ cat >conftest.$ac_ext <<_ACEOF
1.8010 ++/* confdefs.h. */
1.8011 ++_ACEOF
1.8012 ++cat confdefs.h >>conftest.$ac_ext
1.8013 ++cat >>conftest.$ac_ext <<_ACEOF
1.8014 ++/* end confdefs.h. */
1.8015 ++
1.8016 ++int
1.8017 ++main ()
1.8018 ++{
1.8019 ++
1.8020 ++ ;
1.8021 ++ return 0;
1.8022 ++}
1.8023 ++_ACEOF
1.8024 ++rm -f conftest.$ac_objext
1.8025 ++if { (ac_try="$ac_compile"
1.8026 ++case "(($ac_try" in
1.8027 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.8028 ++ *) ac_try_echo=$ac_try;;
1.8029 ++esac
1.8030 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.8031 ++ (eval "$ac_compile") 2>conftest.er1
1.8032 + ac_status=$?
1.8033 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.8034 ++ rm -f conftest.er1
1.8035 ++ cat conftest.err >&5
1.8036 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.8037 +- (exit $ac_status); }; }; then
1.8038 ++ (exit $ac_status); } && {
1.8039 ++ test -z "$ac_c_werror_flag" ||
1.8040 ++ test ! -s conftest.err
1.8041 ++ } && test -s conftest.$ac_objext; then
1.8042 + ac_cv_prog_cc_g=yes
1.8043 + else
1.8044 + echo "$as_me: failed program was:" >&5
1.8045 + sed 's/^/| /' conftest.$ac_ext >&5
1.8046 +
1.8047 +-ac_cv_prog_cc_g=no
1.8048 ++
1.8049 ++fi
1.8050 ++
1.8051 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.8052 ++fi
1.8053 ++
1.8054 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.8055 + fi
1.8056 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.8057 ++
1.8058 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.8059 ++ ac_c_werror_flag=$ac_save_c_werror_flag
1.8060 + fi
1.8061 +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
1.8062 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
1.8063 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
1.8064 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
1.8065 + if test "$ac_test_CFLAGS" = set; then
1.8066 + CFLAGS=$ac_save_CFLAGS
1.8067 + elif test $ac_cv_prog_cc_g = yes; then
1.8068 +@@ -2552,8 +3157,8 @@
1.8069 + if test -n "$ac_tool_prefix"; then
1.8070 + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
1.8071 + set dummy ${ac_tool_prefix}as; ac_word=$2
1.8072 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8073 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8074 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8075 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8076 + if test "${ac_cv_prog_AS+set}" = set; then
1.8077 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8078 + else
1.8079 +@@ -2566,32 +3171,34 @@
1.8080 + IFS=$as_save_IFS
1.8081 + test -z "$as_dir" && as_dir=.
1.8082 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8083 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8084 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8085 + ac_cv_prog_AS="${ac_tool_prefix}as"
1.8086 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8087 + break 2
1.8088 + fi
1.8089 + done
1.8090 + done
1.8091 ++IFS=$as_save_IFS
1.8092 +
1.8093 + fi
1.8094 + fi
1.8095 + AS=$ac_cv_prog_AS
1.8096 + if test -n "$AS"; then
1.8097 +- echo "$as_me:$LINENO: result: $AS" >&5
1.8098 +-echo "${ECHO_T}$AS" >&6
1.8099 ++ { echo "$as_me:$LINENO: result: $AS" >&5
1.8100 ++echo "${ECHO_T}$AS" >&6; }
1.8101 + else
1.8102 +- echo "$as_me:$LINENO: result: no" >&5
1.8103 +-echo "${ECHO_T}no" >&6
1.8104 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8105 ++echo "${ECHO_T}no" >&6; }
1.8106 + fi
1.8107 +
1.8108 ++
1.8109 + fi
1.8110 + if test -z "$ac_cv_prog_AS"; then
1.8111 + ac_ct_AS=$AS
1.8112 + # Extract the first word of "as", so it can be a program name with args.
1.8113 + set dummy as; ac_word=$2
1.8114 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8115 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8116 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8117 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8118 + if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
1.8119 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8120 + else
1.8121 +@@ -2604,26 +3211,41 @@
1.8122 + IFS=$as_save_IFS
1.8123 + test -z "$as_dir" && as_dir=.
1.8124 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8125 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8126 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8127 + ac_cv_prog_ac_ct_AS="as"
1.8128 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8129 + break 2
1.8130 + fi
1.8131 + done
1.8132 + done
1.8133 ++IFS=$as_save_IFS
1.8134 +
1.8135 + fi
1.8136 + fi
1.8137 + ac_ct_AS=$ac_cv_prog_ac_ct_AS
1.8138 + if test -n "$ac_ct_AS"; then
1.8139 +- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.8140 +-echo "${ECHO_T}$ac_ct_AS" >&6
1.8141 ++ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.8142 ++echo "${ECHO_T}$ac_ct_AS" >&6; }
1.8143 + else
1.8144 +- echo "$as_me:$LINENO: result: no" >&5
1.8145 +-echo "${ECHO_T}no" >&6
1.8146 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8147 ++echo "${ECHO_T}no" >&6; }
1.8148 + fi
1.8149 +
1.8150 +- AS=$ac_ct_AS
1.8151 ++ if test "x$ac_ct_AS" = x; then
1.8152 ++ AS=""
1.8153 ++ else
1.8154 ++ case $cross_compiling:$ac_tool_warned in
1.8155 ++yes:)
1.8156 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.8157 ++whose name does not start with the host triplet. If you think this
1.8158 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.8159 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.8160 ++whose name does not start with the host triplet. If you think this
1.8161 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.8162 ++ac_tool_warned=yes ;;
1.8163 ++esac
1.8164 ++ AS=$ac_ct_AS
1.8165 ++ fi
1.8166 + else
1.8167 + AS="$ac_cv_prog_AS"
1.8168 + fi
1.8169 +@@ -2631,8 +3253,8 @@
1.8170 + if test -n "$ac_tool_prefix"; then
1.8171 + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
1.8172 + set dummy ${ac_tool_prefix}ar; ac_word=$2
1.8173 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8174 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8175 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8176 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8177 + if test "${ac_cv_prog_AR+set}" = set; then
1.8178 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8179 + else
1.8180 +@@ -2645,32 +3267,34 @@
1.8181 + IFS=$as_save_IFS
1.8182 + test -z "$as_dir" && as_dir=.
1.8183 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8184 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8185 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8186 + ac_cv_prog_AR="${ac_tool_prefix}ar"
1.8187 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8188 + break 2
1.8189 + fi
1.8190 + done
1.8191 + done
1.8192 ++IFS=$as_save_IFS
1.8193 +
1.8194 + fi
1.8195 + fi
1.8196 + AR=$ac_cv_prog_AR
1.8197 + if test -n "$AR"; then
1.8198 +- echo "$as_me:$LINENO: result: $AR" >&5
1.8199 +-echo "${ECHO_T}$AR" >&6
1.8200 ++ { echo "$as_me:$LINENO: result: $AR" >&5
1.8201 ++echo "${ECHO_T}$AR" >&6; }
1.8202 + else
1.8203 +- echo "$as_me:$LINENO: result: no" >&5
1.8204 +-echo "${ECHO_T}no" >&6
1.8205 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8206 ++echo "${ECHO_T}no" >&6; }
1.8207 + fi
1.8208 +
1.8209 ++
1.8210 + fi
1.8211 + if test -z "$ac_cv_prog_AR"; then
1.8212 + ac_ct_AR=$AR
1.8213 + # Extract the first word of "ar", so it can be a program name with args.
1.8214 + set dummy ar; ac_word=$2
1.8215 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8216 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8217 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8218 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8219 + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
1.8220 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8221 + else
1.8222 +@@ -2683,26 +3307,41 @@
1.8223 + IFS=$as_save_IFS
1.8224 + test -z "$as_dir" && as_dir=.
1.8225 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8226 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8227 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8228 + ac_cv_prog_ac_ct_AR="ar"
1.8229 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8230 + break 2
1.8231 + fi
1.8232 + done
1.8233 + done
1.8234 ++IFS=$as_save_IFS
1.8235 +
1.8236 + fi
1.8237 + fi
1.8238 + ac_ct_AR=$ac_cv_prog_ac_ct_AR
1.8239 + if test -n "$ac_ct_AR"; then
1.8240 +- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.8241 +-echo "${ECHO_T}$ac_ct_AR" >&6
1.8242 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.8243 ++echo "${ECHO_T}$ac_ct_AR" >&6; }
1.8244 + else
1.8245 +- echo "$as_me:$LINENO: result: no" >&5
1.8246 +-echo "${ECHO_T}no" >&6
1.8247 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8248 ++echo "${ECHO_T}no" >&6; }
1.8249 + fi
1.8250 +
1.8251 +- AR=$ac_ct_AR
1.8252 ++ if test "x$ac_ct_AR" = x; then
1.8253 ++ AR=""
1.8254 ++ else
1.8255 ++ case $cross_compiling:$ac_tool_warned in
1.8256 ++yes:)
1.8257 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.8258 ++whose name does not start with the host triplet. If you think this
1.8259 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.8260 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.8261 ++whose name does not start with the host triplet. If you think this
1.8262 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.8263 ++ac_tool_warned=yes ;;
1.8264 ++esac
1.8265 ++ AR=$ac_ct_AR
1.8266 ++ fi
1.8267 + else
1.8268 + AR="$ac_cv_prog_AR"
1.8269 + fi
1.8270 +@@ -2710,8 +3349,8 @@
1.8271 + if test -n "$ac_tool_prefix"; then
1.8272 + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
1.8273 + set dummy ${ac_tool_prefix}ranlib; ac_word=$2
1.8274 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8275 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8276 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8277 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8278 + if test "${ac_cv_prog_RANLIB+set}" = set; then
1.8279 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8280 + else
1.8281 +@@ -2724,32 +3363,34 @@
1.8282 + IFS=$as_save_IFS
1.8283 + test -z "$as_dir" && as_dir=.
1.8284 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8285 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8286 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8287 + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
1.8288 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8289 + break 2
1.8290 + fi
1.8291 + done
1.8292 + done
1.8293 ++IFS=$as_save_IFS
1.8294 +
1.8295 + fi
1.8296 + fi
1.8297 + RANLIB=$ac_cv_prog_RANLIB
1.8298 + if test -n "$RANLIB"; then
1.8299 +- echo "$as_me:$LINENO: result: $RANLIB" >&5
1.8300 +-echo "${ECHO_T}$RANLIB" >&6
1.8301 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5
1.8302 ++echo "${ECHO_T}$RANLIB" >&6; }
1.8303 + else
1.8304 +- echo "$as_me:$LINENO: result: no" >&5
1.8305 +-echo "${ECHO_T}no" >&6
1.8306 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8307 ++echo "${ECHO_T}no" >&6; }
1.8308 + fi
1.8309 +
1.8310 ++
1.8311 + fi
1.8312 + if test -z "$ac_cv_prog_RANLIB"; then
1.8313 + ac_ct_RANLIB=$RANLIB
1.8314 + # Extract the first word of "ranlib", so it can be a program name with args.
1.8315 + set dummy ranlib; ac_word=$2
1.8316 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8317 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8318 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8319 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8320 + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
1.8321 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8322 + else
1.8323 +@@ -2762,27 +3403,41 @@
1.8324 + IFS=$as_save_IFS
1.8325 + test -z "$as_dir" && as_dir=.
1.8326 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8327 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8328 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8329 + ac_cv_prog_ac_ct_RANLIB="ranlib"
1.8330 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8331 + break 2
1.8332 + fi
1.8333 + done
1.8334 + done
1.8335 ++IFS=$as_save_IFS
1.8336 +
1.8337 +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
1.8338 + fi
1.8339 + fi
1.8340 + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
1.8341 + if test -n "$ac_ct_RANLIB"; then
1.8342 +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.8343 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6
1.8344 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.8345 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
1.8346 + else
1.8347 +- echo "$as_me:$LINENO: result: no" >&5
1.8348 +-echo "${ECHO_T}no" >&6
1.8349 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8350 ++echo "${ECHO_T}no" >&6; }
1.8351 + fi
1.8352 +
1.8353 +- RANLIB=$ac_ct_RANLIB
1.8354 ++ if test "x$ac_ct_RANLIB" = x; then
1.8355 ++ RANLIB=":"
1.8356 ++ else
1.8357 ++ case $cross_compiling:$ac_tool_warned in
1.8358 ++yes:)
1.8359 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.8360 ++whose name does not start with the host triplet. If you think this
1.8361 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.8362 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.8363 ++whose name does not start with the host triplet. If you think this
1.8364 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.8365 ++ac_tool_warned=yes ;;
1.8366 ++esac
1.8367 ++ RANLIB=$ac_ct_RANLIB
1.8368 ++ fi
1.8369 + else
1.8370 + RANLIB="$ac_cv_prog_RANLIB"
1.8371 + fi
1.8372 +@@ -2790,8 +3445,8 @@
1.8373 + if test -n "$ac_tool_prefix"; then
1.8374 + # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args.
1.8375 + set dummy ${ac_tool_prefix}readelf; ac_word=$2
1.8376 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8377 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8378 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8379 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8380 + if test "${ac_cv_prog_READELF+set}" = set; then
1.8381 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8382 + else
1.8383 +@@ -2804,32 +3459,34 @@
1.8384 + IFS=$as_save_IFS
1.8385 + test -z "$as_dir" && as_dir=.
1.8386 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8387 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8388 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8389 + ac_cv_prog_READELF="${ac_tool_prefix}readelf"
1.8390 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8391 + break 2
1.8392 + fi
1.8393 + done
1.8394 + done
1.8395 ++IFS=$as_save_IFS
1.8396 +
1.8397 + fi
1.8398 + fi
1.8399 + READELF=$ac_cv_prog_READELF
1.8400 + if test -n "$READELF"; then
1.8401 +- echo "$as_me:$LINENO: result: $READELF" >&5
1.8402 +-echo "${ECHO_T}$READELF" >&6
1.8403 ++ { echo "$as_me:$LINENO: result: $READELF" >&5
1.8404 ++echo "${ECHO_T}$READELF" >&6; }
1.8405 + else
1.8406 +- echo "$as_me:$LINENO: result: no" >&5
1.8407 +-echo "${ECHO_T}no" >&6
1.8408 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8409 ++echo "${ECHO_T}no" >&6; }
1.8410 + fi
1.8411 +
1.8412 ++
1.8413 + fi
1.8414 + if test -z "$ac_cv_prog_READELF"; then
1.8415 + ac_ct_READELF=$READELF
1.8416 + # Extract the first word of "readelf", so it can be a program name with args.
1.8417 + set dummy readelf; ac_word=$2
1.8418 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8419 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8420 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8421 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8422 + if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then
1.8423 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8424 + else
1.8425 +@@ -2842,27 +3499,41 @@
1.8426 + IFS=$as_save_IFS
1.8427 + test -z "$as_dir" && as_dir=.
1.8428 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8429 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8430 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8431 + ac_cv_prog_ac_ct_READELF="readelf"
1.8432 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8433 + break 2
1.8434 + fi
1.8435 + done
1.8436 + done
1.8437 ++IFS=$as_save_IFS
1.8438 +
1.8439 +- test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":"
1.8440 + fi
1.8441 + fi
1.8442 + ac_ct_READELF=$ac_cv_prog_ac_ct_READELF
1.8443 + if test -n "$ac_ct_READELF"; then
1.8444 +- echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
1.8445 +-echo "${ECHO_T}$ac_ct_READELF" >&6
1.8446 ++ { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
1.8447 ++echo "${ECHO_T}$ac_ct_READELF" >&6; }
1.8448 + else
1.8449 +- echo "$as_me:$LINENO: result: no" >&5
1.8450 +-echo "${ECHO_T}no" >&6
1.8451 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8452 ++echo "${ECHO_T}no" >&6; }
1.8453 + fi
1.8454 +
1.8455 +- READELF=$ac_ct_READELF
1.8456 ++ if test "x$ac_ct_READELF" = x; then
1.8457 ++ READELF=":"
1.8458 ++ else
1.8459 ++ case $cross_compiling:$ac_tool_warned in
1.8460 ++yes:)
1.8461 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.8462 ++whose name does not start with the host triplet. If you think this
1.8463 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.8464 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.8465 ++whose name does not start with the host triplet. If you think this
1.8466 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.8467 ++ac_tool_warned=yes ;;
1.8468 ++esac
1.8469 ++ READELF=$ac_ct_READELF
1.8470 ++ fi
1.8471 + else
1.8472 + READELF="$ac_cv_prog_READELF"
1.8473 + fi
1.8474 +@@ -2881,8 +3552,8 @@
1.8475 + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1.8476 + # OS/2's system install, which has a completely different semantic
1.8477 + # ./install, which can be erroneously created by make from ./install.sh.
1.8478 +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.8479 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
1.8480 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.8481 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
1.8482 + if test -z "$INSTALL"; then
1.8483 + if test "${ac_cv_path_install+set}" = set; then
1.8484 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8485 +@@ -2904,7 +3575,7 @@
1.8486 + # by default.
1.8487 + for ac_prog in ginstall scoinst install; do
1.8488 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8489 +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
1.8490 ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
1.8491 + if test $ac_prog = install &&
1.8492 + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.8493 + # AIX install. It has an incompatible calling convention.
1.8494 +@@ -2923,21 +3594,22 @@
1.8495 + ;;
1.8496 + esac
1.8497 + done
1.8498 ++IFS=$as_save_IFS
1.8499 +
1.8500 +
1.8501 + fi
1.8502 + if test "${ac_cv_path_install+set}" = set; then
1.8503 + INSTALL=$ac_cv_path_install
1.8504 + else
1.8505 +- # As a last resort, use the slow shell script. We don't cache a
1.8506 +- # path for INSTALL within a source directory, because that will
1.8507 ++ # As a last resort, use the slow shell script. Don't cache a
1.8508 ++ # value for INSTALL within a source directory, because that will
1.8509 + # break other packages using the cache if that directory is
1.8510 +- # removed, or if the path is relative.
1.8511 ++ # removed, or if the value is a relative name.
1.8512 + INSTALL=$ac_install_sh
1.8513 + fi
1.8514 + fi
1.8515 +-echo "$as_me:$LINENO: result: $INSTALL" >&5
1.8516 +-echo "${ECHO_T}$INSTALL" >&6
1.8517 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
1.8518 ++echo "${ECHO_T}$INSTALL" >&6; }
1.8519 +
1.8520 + # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1.8521 + # It thinks the first close brace ends the variable substitution.
1.8522 +@@ -2951,17 +3623,17 @@
1.8523 + # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */
1.8524 + ac_given_INSTALL=$INSTALL
1.8525 +
1.8526 +-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
1.8527 +-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
1.8528 +- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
1.8529 ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
1.8530 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
1.8531 ++ # Check whether --enable-maintainer-mode was given.
1.8532 + if test "${enable_maintainer_mode+set}" = set; then
1.8533 +- enableval="$enable_maintainer_mode"
1.8534 +- USE_MAINTAINER_MODE=$enableval
1.8535 ++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
1.8536 + else
1.8537 + USE_MAINTAINER_MODE=no
1.8538 +-fi;
1.8539 +- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
1.8540 +-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
1.8541 ++fi
1.8542 ++
1.8543 ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
1.8544 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
1.8545 +
1.8546 +
1.8547 + if test $USE_MAINTAINER_MODE = yes; then
1.8548 +@@ -3081,64 +3753,89 @@
1.8549 +
1.8550 +
1.8551 +
1.8552 +-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
1.8553 +-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
1.8554 +-if test "${lt_cv_path_SED+set}" = set; then
1.8555 ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
1.8556 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
1.8557 ++if test "${ac_cv_path_SED+set}" = set; then
1.8558 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.8559 ++else
1.8560 ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
1.8561 ++ for ac_i in 1 2 3 4 5 6 7; do
1.8562 ++ ac_script="$ac_script$as_nl$ac_script"
1.8563 ++ done
1.8564 ++ echo "$ac_script" | sed 99q >conftest.sed
1.8565 ++ $as_unset ac_script || ac_script=
1.8566 ++ # Extract the first word of "sed gsed" to use in msg output
1.8567 ++if test -z "$SED"; then
1.8568 ++set dummy sed gsed; ac_prog_name=$2
1.8569 ++if test "${ac_cv_path_SED+set}" = set; then
1.8570 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8571 + else
1.8572 +- # Loop through the user's path and test for sed and gsed.
1.8573 +-# Then use that list of sed's as ones to test for truncation.
1.8574 ++ ac_path_SED_found=false
1.8575 ++# Loop through the user's path and test for each of PROGNAME-LIST
1.8576 + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.8577 + for as_dir in $PATH
1.8578 + do
1.8579 + IFS=$as_save_IFS
1.8580 + test -z "$as_dir" && as_dir=.
1.8581 +- for lt_ac_prog in sed gsed; do
1.8582 +- for ac_exec_ext in '' $ac_executable_extensions; do
1.8583 +- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
1.8584 +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
1.8585 +- fi
1.8586 +- done
1.8587 +- done
1.8588 +-done
1.8589 +-IFS=$as_save_IFS
1.8590 +-lt_ac_max=0
1.8591 +-lt_ac_count=0
1.8592 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
1.8593 +-# along with /bin/sed that truncates output.
1.8594 +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
1.8595 +- test ! -f $lt_ac_sed && continue
1.8596 +- cat /dev/null > conftest.in
1.8597 +- lt_ac_count=0
1.8598 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
1.8599 +- # Check for GNU sed and select it if it is found.
1.8600 +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
1.8601 +- lt_cv_path_SED=$lt_ac_sed
1.8602 +- break
1.8603 +- fi
1.8604 +- while true; do
1.8605 +- cat conftest.in conftest.in >conftest.tmp
1.8606 +- mv conftest.tmp conftest.in
1.8607 +- cp conftest.in conftest.nl
1.8608 +- echo >>conftest.nl
1.8609 +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
1.8610 +- cmp -s conftest.out conftest.nl || break
1.8611 +- # 10000 chars as input seems more than enough
1.8612 +- test $lt_ac_count -gt 10 && break
1.8613 +- lt_ac_count=`expr $lt_ac_count + 1`
1.8614 +- if test $lt_ac_count -gt $lt_ac_max; then
1.8615 +- lt_ac_max=$lt_ac_count
1.8616 +- lt_cv_path_SED=$lt_ac_sed
1.8617 ++ for ac_prog in sed gsed; do
1.8618 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.8619 ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
1.8620 ++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
1.8621 ++ # Check for GNU ac_path_SED and select it if it is found.
1.8622 ++ # Check for GNU $ac_path_SED
1.8623 ++case `"$ac_path_SED" --version 2>&1` in
1.8624 ++*GNU*)
1.8625 ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
1.8626 ++*)
1.8627 ++ ac_count=0
1.8628 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
1.8629 ++ while :
1.8630 ++ do
1.8631 ++ cat "conftest.in" "conftest.in" >"conftest.tmp"
1.8632 ++ mv "conftest.tmp" "conftest.in"
1.8633 ++ cp "conftest.in" "conftest.nl"
1.8634 ++ echo '' >> "conftest.nl"
1.8635 ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
1.8636 ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
1.8637 ++ ac_count=`expr $ac_count + 1`
1.8638 ++ if test $ac_count -gt ${ac_path_SED_max-0}; then
1.8639 ++ # Best one so far, save it but keep looking for a better one
1.8640 ++ ac_cv_path_SED="$ac_path_SED"
1.8641 ++ ac_path_SED_max=$ac_count
1.8642 + fi
1.8643 ++ # 10*(2^10) chars as input seems more than enough
1.8644 ++ test $ac_count -gt 10 && break
1.8645 ++ done
1.8646 ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
1.8647 ++esac
1.8648 ++
1.8649 ++
1.8650 ++ $ac_path_SED_found && break 3
1.8651 + done
1.8652 + done
1.8653 +
1.8654 ++done
1.8655 ++IFS=$as_save_IFS
1.8656 ++
1.8657 ++
1.8658 ++fi
1.8659 ++
1.8660 ++SED="$ac_cv_path_SED"
1.8661 ++if test -z "$SED"; then
1.8662 ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
1.8663 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
1.8664 ++ { (exit 1); exit 1; }; }
1.8665 + fi
1.8666 +
1.8667 +-SED=$lt_cv_path_SED
1.8668 ++else
1.8669 ++ ac_cv_path_SED=$SED
1.8670 ++fi
1.8671 +
1.8672 +-echo "$as_me:$LINENO: result: $SED" >&5
1.8673 +-echo "${ECHO_T}$SED" >&6
1.8674 ++fi
1.8675 ++{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
1.8676 ++echo "${ECHO_T}$ac_cv_path_SED" >&6; }
1.8677 ++ SED="$ac_cv_path_SED"
1.8678 ++ rm -f conftest.sed
1.8679 +
1.8680 + test -z "$SED" && SED=sed
1.8681 + Xsed="$SED -e 1s/^X//"
1.8682 +@@ -3161,8 +3858,8 @@
1.8683 + if test -n "$ac_tool_prefix"; then
1.8684 + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
1.8685 + set dummy ${ac_tool_prefix}as; ac_word=$2
1.8686 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8687 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8688 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8689 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8690 + if test "${ac_cv_prog_AS+set}" = set; then
1.8691 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8692 + else
1.8693 +@@ -3175,32 +3872,34 @@
1.8694 + IFS=$as_save_IFS
1.8695 + test -z "$as_dir" && as_dir=.
1.8696 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8697 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8698 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8699 + ac_cv_prog_AS="${ac_tool_prefix}as"
1.8700 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8701 + break 2
1.8702 + fi
1.8703 + done
1.8704 + done
1.8705 ++IFS=$as_save_IFS
1.8706 +
1.8707 + fi
1.8708 + fi
1.8709 + AS=$ac_cv_prog_AS
1.8710 + if test -n "$AS"; then
1.8711 +- echo "$as_me:$LINENO: result: $AS" >&5
1.8712 +-echo "${ECHO_T}$AS" >&6
1.8713 ++ { echo "$as_me:$LINENO: result: $AS" >&5
1.8714 ++echo "${ECHO_T}$AS" >&6; }
1.8715 + else
1.8716 +- echo "$as_me:$LINENO: result: no" >&5
1.8717 +-echo "${ECHO_T}no" >&6
1.8718 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8719 ++echo "${ECHO_T}no" >&6; }
1.8720 + fi
1.8721 +
1.8722 ++
1.8723 + fi
1.8724 + if test -z "$ac_cv_prog_AS"; then
1.8725 + ac_ct_AS=$AS
1.8726 + # Extract the first word of "as", so it can be a program name with args.
1.8727 + set dummy as; ac_word=$2
1.8728 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8729 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8730 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8731 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8732 + if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
1.8733 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8734 + else
1.8735 +@@ -3213,27 +3912,41 @@
1.8736 + IFS=$as_save_IFS
1.8737 + test -z "$as_dir" && as_dir=.
1.8738 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8739 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8740 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8741 + ac_cv_prog_ac_ct_AS="as"
1.8742 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8743 + break 2
1.8744 + fi
1.8745 + done
1.8746 + done
1.8747 ++IFS=$as_save_IFS
1.8748 +
1.8749 +- test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false"
1.8750 + fi
1.8751 + fi
1.8752 + ac_ct_AS=$ac_cv_prog_ac_ct_AS
1.8753 + if test -n "$ac_ct_AS"; then
1.8754 +- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.8755 +-echo "${ECHO_T}$ac_ct_AS" >&6
1.8756 ++ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.8757 ++echo "${ECHO_T}$ac_ct_AS" >&6; }
1.8758 + else
1.8759 +- echo "$as_me:$LINENO: result: no" >&5
1.8760 +-echo "${ECHO_T}no" >&6
1.8761 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8762 ++echo "${ECHO_T}no" >&6; }
1.8763 + fi
1.8764 +
1.8765 +- AS=$ac_ct_AS
1.8766 ++ if test "x$ac_ct_AS" = x; then
1.8767 ++ AS="false"
1.8768 ++ else
1.8769 ++ case $cross_compiling:$ac_tool_warned in
1.8770 ++yes:)
1.8771 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.8772 ++whose name does not start with the host triplet. If you think this
1.8773 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.8774 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.8775 ++whose name does not start with the host triplet. If you think this
1.8776 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.8777 ++ac_tool_warned=yes ;;
1.8778 ++esac
1.8779 ++ AS=$ac_ct_AS
1.8780 ++ fi
1.8781 + else
1.8782 + AS="$ac_cv_prog_AS"
1.8783 + fi
1.8784 +@@ -3241,8 +3954,8 @@
1.8785 + if test -n "$ac_tool_prefix"; then
1.8786 + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
1.8787 + set dummy ${ac_tool_prefix}dlltool; ac_word=$2
1.8788 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8789 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8790 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8791 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8792 + if test "${ac_cv_prog_DLLTOOL+set}" = set; then
1.8793 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8794 + else
1.8795 +@@ -3255,32 +3968,34 @@
1.8796 + IFS=$as_save_IFS
1.8797 + test -z "$as_dir" && as_dir=.
1.8798 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8799 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8800 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8801 + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
1.8802 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8803 + break 2
1.8804 + fi
1.8805 + done
1.8806 + done
1.8807 ++IFS=$as_save_IFS
1.8808 +
1.8809 + fi
1.8810 + fi
1.8811 + DLLTOOL=$ac_cv_prog_DLLTOOL
1.8812 + if test -n "$DLLTOOL"; then
1.8813 +- echo "$as_me:$LINENO: result: $DLLTOOL" >&5
1.8814 +-echo "${ECHO_T}$DLLTOOL" >&6
1.8815 ++ { echo "$as_me:$LINENO: result: $DLLTOOL" >&5
1.8816 ++echo "${ECHO_T}$DLLTOOL" >&6; }
1.8817 + else
1.8818 +- echo "$as_me:$LINENO: result: no" >&5
1.8819 +-echo "${ECHO_T}no" >&6
1.8820 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8821 ++echo "${ECHO_T}no" >&6; }
1.8822 + fi
1.8823 +
1.8824 ++
1.8825 + fi
1.8826 + if test -z "$ac_cv_prog_DLLTOOL"; then
1.8827 + ac_ct_DLLTOOL=$DLLTOOL
1.8828 + # Extract the first word of "dlltool", so it can be a program name with args.
1.8829 + set dummy dlltool; ac_word=$2
1.8830 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8831 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8832 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8833 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8834 + if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
1.8835 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8836 + else
1.8837 +@@ -3293,27 +4008,41 @@
1.8838 + IFS=$as_save_IFS
1.8839 + test -z "$as_dir" && as_dir=.
1.8840 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8841 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8842 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8843 + ac_cv_prog_ac_ct_DLLTOOL="dlltool"
1.8844 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8845 + break 2
1.8846 + fi
1.8847 + done
1.8848 + done
1.8849 ++IFS=$as_save_IFS
1.8850 +
1.8851 +- test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false"
1.8852 + fi
1.8853 + fi
1.8854 + ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
1.8855 + if test -n "$ac_ct_DLLTOOL"; then
1.8856 +- echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
1.8857 +-echo "${ECHO_T}$ac_ct_DLLTOOL" >&6
1.8858 ++ { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
1.8859 ++echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; }
1.8860 + else
1.8861 +- echo "$as_me:$LINENO: result: no" >&5
1.8862 +-echo "${ECHO_T}no" >&6
1.8863 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8864 ++echo "${ECHO_T}no" >&6; }
1.8865 + fi
1.8866 +
1.8867 +- DLLTOOL=$ac_ct_DLLTOOL
1.8868 ++ if test "x$ac_ct_DLLTOOL" = x; then
1.8869 ++ DLLTOOL="false"
1.8870 ++ else
1.8871 ++ case $cross_compiling:$ac_tool_warned in
1.8872 ++yes:)
1.8873 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.8874 ++whose name does not start with the host triplet. If you think this
1.8875 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.8876 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.8877 ++whose name does not start with the host triplet. If you think this
1.8878 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.8879 ++ac_tool_warned=yes ;;
1.8880 ++esac
1.8881 ++ DLLTOOL=$ac_ct_DLLTOOL
1.8882 ++ fi
1.8883 + else
1.8884 + DLLTOOL="$ac_cv_prog_DLLTOOL"
1.8885 + fi
1.8886 +@@ -3321,8 +4050,8 @@
1.8887 + if test -n "$ac_tool_prefix"; then
1.8888 + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
1.8889 + set dummy ${ac_tool_prefix}objdump; ac_word=$2
1.8890 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8891 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8892 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8893 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8894 + if test "${ac_cv_prog_OBJDUMP+set}" = set; then
1.8895 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8896 + else
1.8897 +@@ -3335,32 +4064,34 @@
1.8898 + IFS=$as_save_IFS
1.8899 + test -z "$as_dir" && as_dir=.
1.8900 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8901 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8902 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8903 + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
1.8904 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8905 + break 2
1.8906 + fi
1.8907 + done
1.8908 + done
1.8909 ++IFS=$as_save_IFS
1.8910 +
1.8911 + fi
1.8912 + fi
1.8913 + OBJDUMP=$ac_cv_prog_OBJDUMP
1.8914 + if test -n "$OBJDUMP"; then
1.8915 +- echo "$as_me:$LINENO: result: $OBJDUMP" >&5
1.8916 +-echo "${ECHO_T}$OBJDUMP" >&6
1.8917 ++ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
1.8918 ++echo "${ECHO_T}$OBJDUMP" >&6; }
1.8919 + else
1.8920 +- echo "$as_me:$LINENO: result: no" >&5
1.8921 +-echo "${ECHO_T}no" >&6
1.8922 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8923 ++echo "${ECHO_T}no" >&6; }
1.8924 + fi
1.8925 +
1.8926 ++
1.8927 + fi
1.8928 + if test -z "$ac_cv_prog_OBJDUMP"; then
1.8929 + ac_ct_OBJDUMP=$OBJDUMP
1.8930 + # Extract the first word of "objdump", so it can be a program name with args.
1.8931 + set dummy objdump; ac_word=$2
1.8932 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8933 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8934 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8935 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8936 + if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
1.8937 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8938 + else
1.8939 +@@ -3373,27 +4104,41 @@
1.8940 + IFS=$as_save_IFS
1.8941 + test -z "$as_dir" && as_dir=.
1.8942 + for ac_exec_ext in '' $ac_executable_extensions; do
1.8943 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.8944 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.8945 + ac_cv_prog_ac_ct_OBJDUMP="objdump"
1.8946 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.8947 + break 2
1.8948 + fi
1.8949 + done
1.8950 + done
1.8951 ++IFS=$as_save_IFS
1.8952 +
1.8953 +- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
1.8954 + fi
1.8955 + fi
1.8956 + ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
1.8957 + if test -n "$ac_ct_OBJDUMP"; then
1.8958 +- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
1.8959 +-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
1.8960 ++ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
1.8961 ++echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
1.8962 + else
1.8963 +- echo "$as_me:$LINENO: result: no" >&5
1.8964 +-echo "${ECHO_T}no" >&6
1.8965 ++ { echo "$as_me:$LINENO: result: no" >&5
1.8966 ++echo "${ECHO_T}no" >&6; }
1.8967 + fi
1.8968 +
1.8969 +- OBJDUMP=$ac_ct_OBJDUMP
1.8970 ++ if test "x$ac_ct_OBJDUMP" = x; then
1.8971 ++ OBJDUMP="false"
1.8972 ++ else
1.8973 ++ case $cross_compiling:$ac_tool_warned in
1.8974 ++yes:)
1.8975 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.8976 ++whose name does not start with the host triplet. If you think this
1.8977 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.8978 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.8979 ++whose name does not start with the host triplet. If you think this
1.8980 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.8981 ++ac_tool_warned=yes ;;
1.8982 ++esac
1.8983 ++ OBJDUMP=$ac_ct_OBJDUMP
1.8984 ++ fi
1.8985 + else
1.8986 + OBJDUMP="$ac_cv_prog_OBJDUMP"
1.8987 + fi
1.8988 +@@ -3454,8 +4199,8 @@
1.8989 + if test -n "$ac_tool_prefix"; then
1.8990 + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
1.8991 + set dummy ${ac_tool_prefix}gcc; ac_word=$2
1.8992 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8993 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.8994 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.8995 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.8996 + if test "${ac_cv_prog_CC+set}" = set; then
1.8997 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.8998 + else
1.8999 +@@ -3468,32 +4213,34 @@
1.9000 + IFS=$as_save_IFS
1.9001 + test -z "$as_dir" && as_dir=.
1.9002 + for ac_exec_ext in '' $ac_executable_extensions; do
1.9003 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.9004 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.9005 + ac_cv_prog_CC="${ac_tool_prefix}gcc"
1.9006 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.9007 + break 2
1.9008 + fi
1.9009 + done
1.9010 + done
1.9011 ++IFS=$as_save_IFS
1.9012 +
1.9013 + fi
1.9014 + fi
1.9015 + CC=$ac_cv_prog_CC
1.9016 + if test -n "$CC"; then
1.9017 +- echo "$as_me:$LINENO: result: $CC" >&5
1.9018 +-echo "${ECHO_T}$CC" >&6
1.9019 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.9020 ++echo "${ECHO_T}$CC" >&6; }
1.9021 + else
1.9022 +- echo "$as_me:$LINENO: result: no" >&5
1.9023 +-echo "${ECHO_T}no" >&6
1.9024 ++ { echo "$as_me:$LINENO: result: no" >&5
1.9025 ++echo "${ECHO_T}no" >&6; }
1.9026 + fi
1.9027 +
1.9028 ++
1.9029 + fi
1.9030 + if test -z "$ac_cv_prog_CC"; then
1.9031 + ac_ct_CC=$CC
1.9032 + # Extract the first word of "gcc", so it can be a program name with args.
1.9033 + set dummy gcc; ac_word=$2
1.9034 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9035 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.9036 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9037 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.9038 + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
1.9039 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9040 + else
1.9041 +@@ -3506,36 +4253,51 @@
1.9042 + IFS=$as_save_IFS
1.9043 + test -z "$as_dir" && as_dir=.
1.9044 + for ac_exec_ext in '' $ac_executable_extensions; do
1.9045 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.9046 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.9047 + ac_cv_prog_ac_ct_CC="gcc"
1.9048 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.9049 + break 2
1.9050 + fi
1.9051 + done
1.9052 + done
1.9053 ++IFS=$as_save_IFS
1.9054 +
1.9055 + fi
1.9056 + fi
1.9057 + ac_ct_CC=$ac_cv_prog_ac_ct_CC
1.9058 + if test -n "$ac_ct_CC"; then
1.9059 +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.9060 +-echo "${ECHO_T}$ac_ct_CC" >&6
1.9061 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.9062 ++echo "${ECHO_T}$ac_ct_CC" >&6; }
1.9063 + else
1.9064 +- echo "$as_me:$LINENO: result: no" >&5
1.9065 +-echo "${ECHO_T}no" >&6
1.9066 ++ { echo "$as_me:$LINENO: result: no" >&5
1.9067 ++echo "${ECHO_T}no" >&6; }
1.9068 + fi
1.9069 +
1.9070 +- CC=$ac_ct_CC
1.9071 ++ if test "x$ac_ct_CC" = x; then
1.9072 ++ CC=""
1.9073 ++ else
1.9074 ++ case $cross_compiling:$ac_tool_warned in
1.9075 ++yes:)
1.9076 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.9077 ++whose name does not start with the host triplet. If you think this
1.9078 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.9079 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.9080 ++whose name does not start with the host triplet. If you think this
1.9081 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.9082 ++ac_tool_warned=yes ;;
1.9083 ++esac
1.9084 ++ CC=$ac_ct_CC
1.9085 ++ fi
1.9086 + else
1.9087 + CC="$ac_cv_prog_CC"
1.9088 + fi
1.9089 +
1.9090 + if test -z "$CC"; then
1.9091 +- if test -n "$ac_tool_prefix"; then
1.9092 +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
1.9093 ++ if test -n "$ac_tool_prefix"; then
1.9094 ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
1.9095 + set dummy ${ac_tool_prefix}cc; ac_word=$2
1.9096 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9097 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.9098 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9099 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.9100 + if test "${ac_cv_prog_CC+set}" = set; then
1.9101 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9102 + else
1.9103 +@@ -3548,98 +4310,59 @@
1.9104 + IFS=$as_save_IFS
1.9105 + test -z "$as_dir" && as_dir=.
1.9106 + for ac_exec_ext in '' $ac_executable_extensions; do
1.9107 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.9108 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.9109 + ac_cv_prog_CC="${ac_tool_prefix}cc"
1.9110 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.9111 + break 2
1.9112 + fi
1.9113 + done
1.9114 + done
1.9115 ++IFS=$as_save_IFS
1.9116 +
1.9117 + fi
1.9118 + fi
1.9119 + CC=$ac_cv_prog_CC
1.9120 + if test -n "$CC"; then
1.9121 +- echo "$as_me:$LINENO: result: $CC" >&5
1.9122 +-echo "${ECHO_T}$CC" >&6
1.9123 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.9124 ++echo "${ECHO_T}$CC" >&6; }
1.9125 + else
1.9126 +- echo "$as_me:$LINENO: result: no" >&5
1.9127 +-echo "${ECHO_T}no" >&6
1.9128 ++ { echo "$as_me:$LINENO: result: no" >&5
1.9129 ++echo "${ECHO_T}no" >&6; }
1.9130 + fi
1.9131 +
1.9132 ++
1.9133 ++ fi
1.9134 + fi
1.9135 +-if test -z "$ac_cv_prog_CC"; then
1.9136 +- ac_ct_CC=$CC
1.9137 ++if test -z "$CC"; then
1.9138 + # Extract the first word of "cc", so it can be a program name with args.
1.9139 + set dummy cc; ac_word=$2
1.9140 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9141 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.9142 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
1.9143 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9144 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.9145 ++if test "${ac_cv_prog_CC+set}" = set; then
1.9146 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9147 + else
1.9148 +- if test -n "$ac_ct_CC"; then
1.9149 +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
1.9150 ++ if test -n "$CC"; then
1.9151 ++ ac_cv_prog_CC="$CC" # Let the user override the test.
1.9152 + else
1.9153 ++ ac_prog_rejected=no
1.9154 + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.9155 + for as_dir in $PATH
1.9156 + do
1.9157 + IFS=$as_save_IFS
1.9158 + test -z "$as_dir" && as_dir=.
1.9159 + for ac_exec_ext in '' $ac_executable_extensions; do
1.9160 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.9161 +- ac_cv_prog_ac_ct_CC="cc"
1.9162 +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.9163 +- break 2
1.9164 +- fi
1.9165 +-done
1.9166 +-done
1.9167 +-
1.9168 +-fi
1.9169 +-fi
1.9170 +-ac_ct_CC=$ac_cv_prog_ac_ct_CC
1.9171 +-if test -n "$ac_ct_CC"; then
1.9172 +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.9173 +-echo "${ECHO_T}$ac_ct_CC" >&6
1.9174 +-else
1.9175 +- echo "$as_me:$LINENO: result: no" >&5
1.9176 +-echo "${ECHO_T}no" >&6
1.9177 +-fi
1.9178 +-
1.9179 +- CC=$ac_ct_CC
1.9180 +-else
1.9181 +- CC="$ac_cv_prog_CC"
1.9182 +-fi
1.9183 +-
1.9184 +-fi
1.9185 +-if test -z "$CC"; then
1.9186 +- # Extract the first word of "cc", so it can be a program name with args.
1.9187 +-set dummy cc; ac_word=$2
1.9188 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9189 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.9190 +-if test "${ac_cv_prog_CC+set}" = set; then
1.9191 +- echo $ECHO_N "(cached) $ECHO_C" >&6
1.9192 +-else
1.9193 +- if test -n "$CC"; then
1.9194 +- ac_cv_prog_CC="$CC" # Let the user override the test.
1.9195 +-else
1.9196 +- ac_prog_rejected=no
1.9197 +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.9198 +-for as_dir in $PATH
1.9199 +-do
1.9200 +- IFS=$as_save_IFS
1.9201 +- test -z "$as_dir" && as_dir=.
1.9202 +- for ac_exec_ext in '' $ac_executable_extensions; do
1.9203 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.9204 +- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
1.9205 +- ac_prog_rejected=yes
1.9206 +- continue
1.9207 +- fi
1.9208 +- ac_cv_prog_CC="cc"
1.9209 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.9210 ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
1.9211 ++ ac_prog_rejected=yes
1.9212 ++ continue
1.9213 ++ fi
1.9214 ++ ac_cv_prog_CC="cc"
1.9215 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.9216 + break 2
1.9217 + fi
1.9218 + done
1.9219 + done
1.9220 ++IFS=$as_save_IFS
1.9221 +
1.9222 + if test $ac_prog_rejected = yes; then
1.9223 + # We found a bogon in the path, so make sure we never use it.
1.9224 +@@ -3657,22 +4380,23 @@
1.9225 + fi
1.9226 + CC=$ac_cv_prog_CC
1.9227 + if test -n "$CC"; then
1.9228 +- echo "$as_me:$LINENO: result: $CC" >&5
1.9229 +-echo "${ECHO_T}$CC" >&6
1.9230 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.9231 ++echo "${ECHO_T}$CC" >&6; }
1.9232 + else
1.9233 +- echo "$as_me:$LINENO: result: no" >&5
1.9234 +-echo "${ECHO_T}no" >&6
1.9235 ++ { echo "$as_me:$LINENO: result: no" >&5
1.9236 ++echo "${ECHO_T}no" >&6; }
1.9237 + fi
1.9238 +
1.9239 ++
1.9240 + fi
1.9241 + if test -z "$CC"; then
1.9242 + if test -n "$ac_tool_prefix"; then
1.9243 +- for ac_prog in cl
1.9244 ++ for ac_prog in cl.exe
1.9245 + do
1.9246 + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
1.9247 + set dummy $ac_tool_prefix$ac_prog; ac_word=$2
1.9248 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9249 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.9250 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9251 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.9252 + if test "${ac_cv_prog_CC+set}" = set; then
1.9253 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9254 + else
1.9255 +@@ -3685,36 +4409,38 @@
1.9256 + IFS=$as_save_IFS
1.9257 + test -z "$as_dir" && as_dir=.
1.9258 + for ac_exec_ext in '' $ac_executable_extensions; do
1.9259 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.9260 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.9261 + ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
1.9262 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.9263 + break 2
1.9264 + fi
1.9265 + done
1.9266 + done
1.9267 ++IFS=$as_save_IFS
1.9268 +
1.9269 + fi
1.9270 + fi
1.9271 + CC=$ac_cv_prog_CC
1.9272 + if test -n "$CC"; then
1.9273 +- echo "$as_me:$LINENO: result: $CC" >&5
1.9274 +-echo "${ECHO_T}$CC" >&6
1.9275 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.9276 ++echo "${ECHO_T}$CC" >&6; }
1.9277 + else
1.9278 +- echo "$as_me:$LINENO: result: no" >&5
1.9279 +-echo "${ECHO_T}no" >&6
1.9280 ++ { echo "$as_me:$LINENO: result: no" >&5
1.9281 ++echo "${ECHO_T}no" >&6; }
1.9282 + fi
1.9283 +
1.9284 ++
1.9285 + test -n "$CC" && break
1.9286 + done
1.9287 + fi
1.9288 + if test -z "$CC"; then
1.9289 + ac_ct_CC=$CC
1.9290 +- for ac_prog in cl
1.9291 ++ for ac_prog in cl.exe
1.9292 + do
1.9293 + # Extract the first word of "$ac_prog", so it can be a program name with args.
1.9294 + set dummy $ac_prog; ac_word=$2
1.9295 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9296 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.9297 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.9298 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.9299 + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
1.9300 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9301 + else
1.9302 +@@ -3727,29 +4453,45 @@
1.9303 + IFS=$as_save_IFS
1.9304 + test -z "$as_dir" && as_dir=.
1.9305 + for ac_exec_ext in '' $ac_executable_extensions; do
1.9306 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.9307 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.9308 + ac_cv_prog_ac_ct_CC="$ac_prog"
1.9309 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.9310 + break 2
1.9311 + fi
1.9312 + done
1.9313 + done
1.9314 ++IFS=$as_save_IFS
1.9315 +
1.9316 + fi
1.9317 + fi
1.9318 + ac_ct_CC=$ac_cv_prog_ac_ct_CC
1.9319 + if test -n "$ac_ct_CC"; then
1.9320 +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.9321 +-echo "${ECHO_T}$ac_ct_CC" >&6
1.9322 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.9323 ++echo "${ECHO_T}$ac_ct_CC" >&6; }
1.9324 + else
1.9325 +- echo "$as_me:$LINENO: result: no" >&5
1.9326 +-echo "${ECHO_T}no" >&6
1.9327 ++ { echo "$as_me:$LINENO: result: no" >&5
1.9328 ++echo "${ECHO_T}no" >&6; }
1.9329 + fi
1.9330 +
1.9331 ++
1.9332 + test -n "$ac_ct_CC" && break
1.9333 + done
1.9334 +
1.9335 +- CC=$ac_ct_CC
1.9336 ++ if test "x$ac_ct_CC" = x; then
1.9337 ++ CC=""
1.9338 ++ else
1.9339 ++ case $cross_compiling:$ac_tool_warned in
1.9340 ++yes:)
1.9341 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.9342 ++whose name does not start with the host triplet. If you think this
1.9343 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.9344 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.9345 ++whose name does not start with the host triplet. If you think this
1.9346 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.9347 ++ac_tool_warned=yes ;;
1.9348 ++esac
1.9349 ++ CC=$ac_ct_CC
1.9350 ++ fi
1.9351 + fi
1.9352 +
1.9353 + fi
1.9354 +@@ -3762,21 +4504,35 @@
1.9355 + { (exit 1); exit 1; }; }
1.9356 +
1.9357 + # Provide some information about the compiler.
1.9358 +-echo "$as_me:$LINENO:" \
1.9359 +- "checking for C compiler version" >&5
1.9360 ++echo "$as_me:$LINENO: checking for C compiler version" >&5
1.9361 + ac_compiler=`set X $ac_compile; echo $2`
1.9362 +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
1.9363 +- (eval $ac_compiler --version </dev/null >&5) 2>&5
1.9364 ++{ (ac_try="$ac_compiler --version >&5"
1.9365 ++case "(($ac_try" in
1.9366 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9367 ++ *) ac_try_echo=$ac_try;;
1.9368 ++esac
1.9369 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9370 ++ (eval "$ac_compiler --version >&5") 2>&5
1.9371 + ac_status=$?
1.9372 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9373 + (exit $ac_status); }
1.9374 +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
1.9375 +- (eval $ac_compiler -v </dev/null >&5) 2>&5
1.9376 ++{ (ac_try="$ac_compiler -v >&5"
1.9377 ++case "(($ac_try" in
1.9378 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9379 ++ *) ac_try_echo=$ac_try;;
1.9380 ++esac
1.9381 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9382 ++ (eval "$ac_compiler -v >&5") 2>&5
1.9383 + ac_status=$?
1.9384 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9385 + (exit $ac_status); }
1.9386 +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
1.9387 +- (eval $ac_compiler -V </dev/null >&5) 2>&5
1.9388 ++{ (ac_try="$ac_compiler -V >&5"
1.9389 ++case "(($ac_try" in
1.9390 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9391 ++ *) ac_try_echo=$ac_try;;
1.9392 ++esac
1.9393 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9394 ++ (eval "$ac_compiler -V >&5") 2>&5
1.9395 + ac_status=$?
1.9396 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9397 + (exit $ac_status); }
1.9398 +@@ -3801,47 +4557,77 @@
1.9399 + # Try to create an executable without -o first, disregard a.out.
1.9400 + # It will help us diagnose broken compilers, and finding out an intuition
1.9401 + # of exeext.
1.9402 +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
1.9403 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
1.9404 ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
1.9405 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
1.9406 + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
1.9407 +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
1.9408 +- (eval $ac_link_default) 2>&5
1.9409 ++#
1.9410 ++# List of possible output files, starting from the most likely.
1.9411 ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
1.9412 ++# only as a last resort. b.out is created by i960 compilers.
1.9413 ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
1.9414 ++#
1.9415 ++# The IRIX 6 linker writes into existing files which may not be
1.9416 ++# executable, retaining their permissions. Remove them first so a
1.9417 ++# subsequent execution test works.
1.9418 ++ac_rmfiles=
1.9419 ++for ac_file in $ac_files
1.9420 ++do
1.9421 ++ case $ac_file in
1.9422 ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
1.9423 ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
1.9424 ++ esac
1.9425 ++done
1.9426 ++rm -f $ac_rmfiles
1.9427 ++
1.9428 ++if { (ac_try="$ac_link_default"
1.9429 ++case "(($ac_try" in
1.9430 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9431 ++ *) ac_try_echo=$ac_try;;
1.9432 ++esac
1.9433 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9434 ++ (eval "$ac_link_default") 2>&5
1.9435 + ac_status=$?
1.9436 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9437 + (exit $ac_status); }; then
1.9438 +- # Find the output, starting from the most likely. This scheme is
1.9439 +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
1.9440 +-# resort.
1.9441 +-
1.9442 +-# Be careful to initialize this variable, since it used to be cached.
1.9443 +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
1.9444 +-ac_cv_exeext=
1.9445 +-# b.out is created by i960 compilers.
1.9446 +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
1.9447 ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
1.9448 ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
1.9449 ++# in a Makefile. We should not override ac_cv_exeext if it was cached,
1.9450 ++# so that the user can short-circuit this test for compilers unknown to
1.9451 ++# Autoconf.
1.9452 ++for ac_file in $ac_files ''
1.9453 + do
1.9454 + test -f "$ac_file" || continue
1.9455 + case $ac_file in
1.9456 +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
1.9457 +- ;;
1.9458 +- conftest.$ac_ext )
1.9459 +- # This is the source file.
1.9460 ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
1.9461 + ;;
1.9462 + [ab].out )
1.9463 + # We found the default executable, but exeext='' is most
1.9464 + # certainly right.
1.9465 + break;;
1.9466 + *.* )
1.9467 +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
1.9468 +- # FIXME: I believe we export ac_cv_exeext for Libtool,
1.9469 +- # but it would be cool to find out if it's true. Does anybody
1.9470 +- # maintain Libtool? --akim.
1.9471 +- export ac_cv_exeext
1.9472 ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
1.9473 ++ then :; else
1.9474 ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
1.9475 ++ fi
1.9476 ++ # We set ac_cv_exeext here because the later test for it is not
1.9477 ++ # safe: cross compilers may not add the suffix if given an `-o'
1.9478 ++ # argument, so we may need to know it at that point already.
1.9479 ++ # Even if this section looks crufty: it has the advantage of
1.9480 ++ # actually working.
1.9481 + break;;
1.9482 + * )
1.9483 + break;;
1.9484 + esac
1.9485 + done
1.9486 ++test "$ac_cv_exeext" = no && ac_cv_exeext=
1.9487 ++
1.9488 + else
1.9489 ++ ac_file=''
1.9490 ++fi
1.9491 ++
1.9492 ++{ echo "$as_me:$LINENO: result: $ac_file" >&5
1.9493 ++echo "${ECHO_T}$ac_file" >&6; }
1.9494 ++if test -z "$ac_file"; then
1.9495 + echo "$as_me: failed program was:" >&5
1.9496 + sed 's/^/| /' conftest.$ac_ext >&5
1.9497 +
1.9498 +@@ -3853,19 +4639,21 @@
1.9499 + fi
1.9500 +
1.9501 + ac_exeext=$ac_cv_exeext
1.9502 +-echo "$as_me:$LINENO: result: $ac_file" >&5
1.9503 +-echo "${ECHO_T}$ac_file" >&6
1.9504 +
1.9505 +-# Check the compiler produces executables we can run. If not, either
1.9506 ++# Check that the compiler produces executables we can run. If not, either
1.9507 + # the compiler is broken, or we cross compile.
1.9508 +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
1.9509 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
1.9510 ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
1.9511 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
1.9512 + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
1.9513 + # If not cross compiling, check that we can run a simple program.
1.9514 + if test "$cross_compiling" != yes; then
1.9515 + if { ac_try='./$ac_file'
1.9516 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.9517 +- (eval $ac_try) 2>&5
1.9518 ++ { (case "(($ac_try" in
1.9519 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9520 ++ *) ac_try_echo=$ac_try;;
1.9521 ++esac
1.9522 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9523 ++ (eval "$ac_try") 2>&5
1.9524 + ac_status=$?
1.9525 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9526 + (exit $ac_status); }; }; then
1.9527 +@@ -3884,22 +4672,27 @@
1.9528 + fi
1.9529 + fi
1.9530 + fi
1.9531 +-echo "$as_me:$LINENO: result: yes" >&5
1.9532 +-echo "${ECHO_T}yes" >&6
1.9533 ++{ echo "$as_me:$LINENO: result: yes" >&5
1.9534 ++echo "${ECHO_T}yes" >&6; }
1.9535 +
1.9536 + rm -f a.out a.exe conftest$ac_cv_exeext b.out
1.9537 + ac_clean_files=$ac_clean_files_save
1.9538 +-# Check the compiler produces executables we can run. If not, either
1.9539 ++# Check that the compiler produces executables we can run. If not, either
1.9540 + # the compiler is broken, or we cross compile.
1.9541 +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
1.9542 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
1.9543 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5
1.9544 +-echo "${ECHO_T}$cross_compiling" >&6
1.9545 +-
1.9546 +-echo "$as_me:$LINENO: checking for suffix of executables" >&5
1.9547 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
1.9548 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.9549 +- (eval $ac_link) 2>&5
1.9550 ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
1.9551 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
1.9552 ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
1.9553 ++echo "${ECHO_T}$cross_compiling" >&6; }
1.9554 ++
1.9555 ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
1.9556 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
1.9557 ++if { (ac_try="$ac_link"
1.9558 ++case "(($ac_try" in
1.9559 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9560 ++ *) ac_try_echo=$ac_try;;
1.9561 ++esac
1.9562 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9563 ++ (eval "$ac_link") 2>&5
1.9564 + ac_status=$?
1.9565 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9566 + (exit $ac_status); }; then
1.9567 +@@ -3910,9 +4703,8 @@
1.9568 + for ac_file in conftest.exe conftest conftest.*; do
1.9569 + test -f "$ac_file" || continue
1.9570 + case $ac_file in
1.9571 +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
1.9572 ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
1.9573 + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
1.9574 +- export ac_cv_exeext
1.9575 + break;;
1.9576 + * ) break;;
1.9577 + esac
1.9578 +@@ -3926,14 +4718,14 @@
1.9579 + fi
1.9580 +
1.9581 + rm -f conftest$ac_cv_exeext
1.9582 +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
1.9583 +-echo "${ECHO_T}$ac_cv_exeext" >&6
1.9584 ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
1.9585 ++echo "${ECHO_T}$ac_cv_exeext" >&6; }
1.9586 +
1.9587 + rm -f conftest.$ac_ext
1.9588 + EXEEXT=$ac_cv_exeext
1.9589 + ac_exeext=$EXEEXT
1.9590 +-echo "$as_me:$LINENO: checking for suffix of object files" >&5
1.9591 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
1.9592 ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
1.9593 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
1.9594 + if test "${ac_cv_objext+set}" = set; then
1.9595 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9596 + else
1.9597 +@@ -3953,14 +4745,20 @@
1.9598 + }
1.9599 + _ACEOF
1.9600 + rm -f conftest.o conftest.obj
1.9601 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.9602 +- (eval $ac_compile) 2>&5
1.9603 ++if { (ac_try="$ac_compile"
1.9604 ++case "(($ac_try" in
1.9605 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9606 ++ *) ac_try_echo=$ac_try;;
1.9607 ++esac
1.9608 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9609 ++ (eval "$ac_compile") 2>&5
1.9610 + ac_status=$?
1.9611 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9612 + (exit $ac_status); }; then
1.9613 +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
1.9614 ++ for ac_file in conftest.o conftest.obj conftest.*; do
1.9615 ++ test -f "$ac_file" || continue;
1.9616 + case $ac_file in
1.9617 +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
1.9618 ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
1.9619 + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
1.9620 + break;;
1.9621 + esac
1.9622 +@@ -3978,12 +4776,12 @@
1.9623 +
1.9624 + rm -f conftest.$ac_cv_objext conftest.$ac_ext
1.9625 + fi
1.9626 +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
1.9627 +-echo "${ECHO_T}$ac_cv_objext" >&6
1.9628 ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
1.9629 ++echo "${ECHO_T}$ac_cv_objext" >&6; }
1.9630 + OBJEXT=$ac_cv_objext
1.9631 + ac_objext=$OBJEXT
1.9632 +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
1.9633 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
1.9634 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
1.9635 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
1.9636 + if test "${ac_cv_c_compiler_gnu+set}" = set; then
1.9637 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9638 + else
1.9639 +@@ -4006,50 +4804,49 @@
1.9640 + }
1.9641 + _ACEOF
1.9642 + rm -f conftest.$ac_objext
1.9643 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.9644 +- (eval $ac_compile) 2>conftest.er1
1.9645 ++if { (ac_try="$ac_compile"
1.9646 ++case "(($ac_try" in
1.9647 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9648 ++ *) ac_try_echo=$ac_try;;
1.9649 ++esac
1.9650 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9651 ++ (eval "$ac_compile") 2>conftest.er1
1.9652 + ac_status=$?
1.9653 + grep -v '^ *+' conftest.er1 >conftest.err
1.9654 + rm -f conftest.er1
1.9655 + cat conftest.err >&5
1.9656 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9657 +- (exit $ac_status); } &&
1.9658 +- { ac_try='test -z "$ac_c_werror_flag"
1.9659 +- || test ! -s conftest.err'
1.9660 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.9661 +- (eval $ac_try) 2>&5
1.9662 +- ac_status=$?
1.9663 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9664 +- (exit $ac_status); }; } &&
1.9665 +- { ac_try='test -s conftest.$ac_objext'
1.9666 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.9667 +- (eval $ac_try) 2>&5
1.9668 +- ac_status=$?
1.9669 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9670 +- (exit $ac_status); }; }; then
1.9671 ++ (exit $ac_status); } && {
1.9672 ++ test -z "$ac_c_werror_flag" ||
1.9673 ++ test ! -s conftest.err
1.9674 ++ } && test -s conftest.$ac_objext; then
1.9675 + ac_compiler_gnu=yes
1.9676 + else
1.9677 + echo "$as_me: failed program was:" >&5
1.9678 + sed 's/^/| /' conftest.$ac_ext >&5
1.9679 +
1.9680 +-ac_compiler_gnu=no
1.9681 ++ ac_compiler_gnu=no
1.9682 + fi
1.9683 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.9684 ++
1.9685 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.9686 + ac_cv_c_compiler_gnu=$ac_compiler_gnu
1.9687 +
1.9688 + fi
1.9689 +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
1.9690 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
1.9691 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
1.9692 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
1.9693 + GCC=`test $ac_compiler_gnu = yes && echo yes`
1.9694 + ac_test_CFLAGS=${CFLAGS+set}
1.9695 + ac_save_CFLAGS=$CFLAGS
1.9696 +-CFLAGS="-g"
1.9697 +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
1.9698 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
1.9699 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
1.9700 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
1.9701 + if test "${ac_cv_prog_cc_g+set}" = set; then
1.9702 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9703 + else
1.9704 +- cat >conftest.$ac_ext <<_ACEOF
1.9705 ++ ac_save_c_werror_flag=$ac_c_werror_flag
1.9706 ++ ac_c_werror_flag=yes
1.9707 ++ ac_cv_prog_cc_g=no
1.9708 ++ CFLAGS="-g"
1.9709 ++ cat >conftest.$ac_ext <<_ACEOF
1.9710 + /* confdefs.h. */
1.9711 + _ACEOF
1.9712 + cat confdefs.h >>conftest.$ac_ext
1.9713 +@@ -4065,38 +4862,118 @@
1.9714 + }
1.9715 + _ACEOF
1.9716 + rm -f conftest.$ac_objext
1.9717 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.9718 +- (eval $ac_compile) 2>conftest.er1
1.9719 ++if { (ac_try="$ac_compile"
1.9720 ++case "(($ac_try" in
1.9721 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9722 ++ *) ac_try_echo=$ac_try;;
1.9723 ++esac
1.9724 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9725 ++ (eval "$ac_compile") 2>conftest.er1
1.9726 + ac_status=$?
1.9727 + grep -v '^ *+' conftest.er1 >conftest.err
1.9728 + rm -f conftest.er1
1.9729 + cat conftest.err >&5
1.9730 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9731 +- (exit $ac_status); } &&
1.9732 +- { ac_try='test -z "$ac_c_werror_flag"
1.9733 +- || test ! -s conftest.err'
1.9734 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.9735 +- (eval $ac_try) 2>&5
1.9736 ++ (exit $ac_status); } && {
1.9737 ++ test -z "$ac_c_werror_flag" ||
1.9738 ++ test ! -s conftest.err
1.9739 ++ } && test -s conftest.$ac_objext; then
1.9740 ++ ac_cv_prog_cc_g=yes
1.9741 ++else
1.9742 ++ echo "$as_me: failed program was:" >&5
1.9743 ++sed 's/^/| /' conftest.$ac_ext >&5
1.9744 ++
1.9745 ++ CFLAGS=""
1.9746 ++ cat >conftest.$ac_ext <<_ACEOF
1.9747 ++/* confdefs.h. */
1.9748 ++_ACEOF
1.9749 ++cat confdefs.h >>conftest.$ac_ext
1.9750 ++cat >>conftest.$ac_ext <<_ACEOF
1.9751 ++/* end confdefs.h. */
1.9752 ++
1.9753 ++int
1.9754 ++main ()
1.9755 ++{
1.9756 ++
1.9757 ++ ;
1.9758 ++ return 0;
1.9759 ++}
1.9760 ++_ACEOF
1.9761 ++rm -f conftest.$ac_objext
1.9762 ++if { (ac_try="$ac_compile"
1.9763 ++case "(($ac_try" in
1.9764 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9765 ++ *) ac_try_echo=$ac_try;;
1.9766 ++esac
1.9767 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9768 ++ (eval "$ac_compile") 2>conftest.er1
1.9769 + ac_status=$?
1.9770 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.9771 ++ rm -f conftest.er1
1.9772 ++ cat conftest.err >&5
1.9773 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9774 +- (exit $ac_status); }; } &&
1.9775 +- { ac_try='test -s conftest.$ac_objext'
1.9776 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.9777 +- (eval $ac_try) 2>&5
1.9778 ++ (exit $ac_status); } && {
1.9779 ++ test -z "$ac_c_werror_flag" ||
1.9780 ++ test ! -s conftest.err
1.9781 ++ } && test -s conftest.$ac_objext; then
1.9782 ++ :
1.9783 ++else
1.9784 ++ echo "$as_me: failed program was:" >&5
1.9785 ++sed 's/^/| /' conftest.$ac_ext >&5
1.9786 ++
1.9787 ++ ac_c_werror_flag=$ac_save_c_werror_flag
1.9788 ++ CFLAGS="-g"
1.9789 ++ cat >conftest.$ac_ext <<_ACEOF
1.9790 ++/* confdefs.h. */
1.9791 ++_ACEOF
1.9792 ++cat confdefs.h >>conftest.$ac_ext
1.9793 ++cat >>conftest.$ac_ext <<_ACEOF
1.9794 ++/* end confdefs.h. */
1.9795 ++
1.9796 ++int
1.9797 ++main ()
1.9798 ++{
1.9799 ++
1.9800 ++ ;
1.9801 ++ return 0;
1.9802 ++}
1.9803 ++_ACEOF
1.9804 ++rm -f conftest.$ac_objext
1.9805 ++if { (ac_try="$ac_compile"
1.9806 ++case "(($ac_try" in
1.9807 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9808 ++ *) ac_try_echo=$ac_try;;
1.9809 ++esac
1.9810 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9811 ++ (eval "$ac_compile") 2>conftest.er1
1.9812 + ac_status=$?
1.9813 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.9814 ++ rm -f conftest.er1
1.9815 ++ cat conftest.err >&5
1.9816 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9817 +- (exit $ac_status); }; }; then
1.9818 ++ (exit $ac_status); } && {
1.9819 ++ test -z "$ac_c_werror_flag" ||
1.9820 ++ test ! -s conftest.err
1.9821 ++ } && test -s conftest.$ac_objext; then
1.9822 + ac_cv_prog_cc_g=yes
1.9823 + else
1.9824 + echo "$as_me: failed program was:" >&5
1.9825 + sed 's/^/| /' conftest.$ac_ext >&5
1.9826 +
1.9827 +-ac_cv_prog_cc_g=no
1.9828 ++
1.9829 + fi
1.9830 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.9831 ++
1.9832 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.9833 ++fi
1.9834 ++
1.9835 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.9836 ++fi
1.9837 ++
1.9838 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.9839 ++ ac_c_werror_flag=$ac_save_c_werror_flag
1.9840 + fi
1.9841 +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
1.9842 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
1.9843 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
1.9844 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
1.9845 + if test "$ac_test_CFLAGS" = set; then
1.9846 + CFLAGS=$ac_save_CFLAGS
1.9847 + elif test $ac_cv_prog_cc_g = yes; then
1.9848 +@@ -4112,12 +4989,12 @@
1.9849 + CFLAGS=
1.9850 + fi
1.9851 + fi
1.9852 +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
1.9853 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
1.9854 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then
1.9855 ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
1.9856 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
1.9857 ++if test "${ac_cv_prog_cc_c89+set}" = set; then
1.9858 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.9859 + else
1.9860 +- ac_cv_prog_cc_stdc=no
1.9861 ++ ac_cv_prog_cc_c89=no
1.9862 + ac_save_CC=$CC
1.9863 + cat >conftest.$ac_ext <<_ACEOF
1.9864 + /* confdefs.h. */
1.9865 +@@ -4151,12 +5028,17 @@
1.9866 + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
1.9867 + function prototypes and stuff, but not '\xHH' hex character constants.
1.9868 + These don't provoke an error unfortunately, instead are silently treated
1.9869 +- as 'x'. The following induces an error, until -std1 is added to get
1.9870 ++ as 'x'. The following induces an error, until -std is added to get
1.9871 + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
1.9872 + array size at least. It's necessary to write '\x00'==0 to get something
1.9873 +- that's true only with -std1. */
1.9874 ++ that's true only with -std. */
1.9875 + int osf4_cc_array ['\x00' == 0 ? 1 : -1];
1.9876 +
1.9877 ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
1.9878 ++ inside strings and character constants. */
1.9879 ++#define FOO(x) 'x'
1.9880 ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
1.9881 ++
1.9882 + int test (int i, double x);
1.9883 + struct s1 {int (*f) (int a);};
1.9884 + struct s2 {int (*f) (double a);};
1.9885 +@@ -4171,205 +5053,57 @@
1.9886 + return 0;
1.9887 + }
1.9888 + _ACEOF
1.9889 +-# Don't try gcc -ansi; that turns off useful extensions and
1.9890 +-# breaks some systems' header files.
1.9891 +-# AIX -qlanglvl=ansi
1.9892 +-# Ultrix and OSF/1 -std1
1.9893 +-# HP-UX 10.20 and later -Ae
1.9894 +-# HP-UX older versions -Aa -D_HPUX_SOURCE
1.9895 +-# SVR4 -Xc -D__EXTENSIONS__
1.9896 +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
1.9897 ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
1.9898 ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
1.9899 + do
1.9900 + CC="$ac_save_CC $ac_arg"
1.9901 + rm -f conftest.$ac_objext
1.9902 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.9903 +- (eval $ac_compile) 2>conftest.er1
1.9904 ++if { (ac_try="$ac_compile"
1.9905 ++case "(($ac_try" in
1.9906 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.9907 ++ *) ac_try_echo=$ac_try;;
1.9908 ++esac
1.9909 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.9910 ++ (eval "$ac_compile") 2>conftest.er1
1.9911 + ac_status=$?
1.9912 + grep -v '^ *+' conftest.er1 >conftest.err
1.9913 + rm -f conftest.er1
1.9914 + cat conftest.err >&5
1.9915 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9916 +- (exit $ac_status); } &&
1.9917 +- { ac_try='test -z "$ac_c_werror_flag"
1.9918 +- || test ! -s conftest.err'
1.9919 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.9920 +- (eval $ac_try) 2>&5
1.9921 +- ac_status=$?
1.9922 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9923 +- (exit $ac_status); }; } &&
1.9924 +- { ac_try='test -s conftest.$ac_objext'
1.9925 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.9926 +- (eval $ac_try) 2>&5
1.9927 +- ac_status=$?
1.9928 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9929 +- (exit $ac_status); }; }; then
1.9930 +- ac_cv_prog_cc_stdc=$ac_arg
1.9931 +-break
1.9932 ++ (exit $ac_status); } && {
1.9933 ++ test -z "$ac_c_werror_flag" ||
1.9934 ++ test ! -s conftest.err
1.9935 ++ } && test -s conftest.$ac_objext; then
1.9936 ++ ac_cv_prog_cc_c89=$ac_arg
1.9937 + else
1.9938 + echo "$as_me: failed program was:" >&5
1.9939 + sed 's/^/| /' conftest.$ac_ext >&5
1.9940 +
1.9941 ++
1.9942 + fi
1.9943 +-rm -f conftest.err conftest.$ac_objext
1.9944 ++
1.9945 ++rm -f core conftest.err conftest.$ac_objext
1.9946 ++ test "x$ac_cv_prog_cc_c89" != "xno" && break
1.9947 + done
1.9948 +-rm -f conftest.$ac_ext conftest.$ac_objext
1.9949 ++rm -f conftest.$ac_ext
1.9950 + CC=$ac_save_CC
1.9951 +
1.9952 + fi
1.9953 +-
1.9954 +-case "x$ac_cv_prog_cc_stdc" in
1.9955 +- x|xno)
1.9956 +- echo "$as_me:$LINENO: result: none needed" >&5
1.9957 +-echo "${ECHO_T}none needed" >&6 ;;
1.9958 ++# AC_CACHE_VAL
1.9959 ++case "x$ac_cv_prog_cc_c89" in
1.9960 ++ x)
1.9961 ++ { echo "$as_me:$LINENO: result: none needed" >&5
1.9962 ++echo "${ECHO_T}none needed" >&6; } ;;
1.9963 ++ xno)
1.9964 ++ { echo "$as_me:$LINENO: result: unsupported" >&5
1.9965 ++echo "${ECHO_T}unsupported" >&6; } ;;
1.9966 + *)
1.9967 +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
1.9968 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
1.9969 +- CC="$CC $ac_cv_prog_cc_stdc" ;;
1.9970 ++ CC="$CC $ac_cv_prog_cc_c89"
1.9971 ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
1.9972 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
1.9973 + esac
1.9974 +
1.9975 +-# Some people use a C++ compiler to compile C. Since we use `exit',
1.9976 +-# in C++ we need to declare it. In case someone uses the same compiler
1.9977 +-# for both compiling C and C++ we need to have the C++ compiler decide
1.9978 +-# the declaration of exit, since it's the most demanding environment.
1.9979 +-cat >conftest.$ac_ext <<_ACEOF
1.9980 +-#ifndef __cplusplus
1.9981 +- choke me
1.9982 +-#endif
1.9983 +-_ACEOF
1.9984 +-rm -f conftest.$ac_objext
1.9985 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.9986 +- (eval $ac_compile) 2>conftest.er1
1.9987 +- ac_status=$?
1.9988 +- grep -v '^ *+' conftest.er1 >conftest.err
1.9989 +- rm -f conftest.er1
1.9990 +- cat conftest.err >&5
1.9991 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9992 +- (exit $ac_status); } &&
1.9993 +- { ac_try='test -z "$ac_c_werror_flag"
1.9994 +- || test ! -s conftest.err'
1.9995 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.9996 +- (eval $ac_try) 2>&5
1.9997 +- ac_status=$?
1.9998 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.9999 +- (exit $ac_status); }; } &&
1.10000 +- { ac_try='test -s conftest.$ac_objext'
1.10001 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.10002 +- (eval $ac_try) 2>&5
1.10003 +- ac_status=$?
1.10004 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.10005 +- (exit $ac_status); }; }; then
1.10006 +- for ac_declaration in \
1.10007 +- '' \
1.10008 +- 'extern "C" void std::exit (int) throw (); using std::exit;' \
1.10009 +- 'extern "C" void std::exit (int); using std::exit;' \
1.10010 +- 'extern "C" void exit (int) throw ();' \
1.10011 +- 'extern "C" void exit (int);' \
1.10012 +- 'void exit (int);'
1.10013 +-do
1.10014 +- cat >conftest.$ac_ext <<_ACEOF
1.10015 +-/* confdefs.h. */
1.10016 +-_ACEOF
1.10017 +-cat confdefs.h >>conftest.$ac_ext
1.10018 +-cat >>conftest.$ac_ext <<_ACEOF
1.10019 +-/* end confdefs.h. */
1.10020 +-$ac_declaration
1.10021 +-#include <stdlib.h>
1.10022 +-int
1.10023 +-main ()
1.10024 +-{
1.10025 +-exit (42);
1.10026 +- ;
1.10027 +- return 0;
1.10028 +-}
1.10029 +-_ACEOF
1.10030 +-rm -f conftest.$ac_objext
1.10031 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.10032 +- (eval $ac_compile) 2>conftest.er1
1.10033 +- ac_status=$?
1.10034 +- grep -v '^ *+' conftest.er1 >conftest.err
1.10035 +- rm -f conftest.er1
1.10036 +- cat conftest.err >&5
1.10037 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.10038 +- (exit $ac_status); } &&
1.10039 +- { ac_try='test -z "$ac_c_werror_flag"
1.10040 +- || test ! -s conftest.err'
1.10041 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.10042 +- (eval $ac_try) 2>&5
1.10043 +- ac_status=$?
1.10044 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.10045 +- (exit $ac_status); }; } &&
1.10046 +- { ac_try='test -s conftest.$ac_objext'
1.10047 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.10048 +- (eval $ac_try) 2>&5
1.10049 +- ac_status=$?
1.10050 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.10051 +- (exit $ac_status); }; }; then
1.10052 +- :
1.10053 +-else
1.10054 +- echo "$as_me: failed program was:" >&5
1.10055 +-sed 's/^/| /' conftest.$ac_ext >&5
1.10056 +
1.10057 +-continue
1.10058 +-fi
1.10059 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.10060 +- cat >conftest.$ac_ext <<_ACEOF
1.10061 +-/* confdefs.h. */
1.10062 +-_ACEOF
1.10063 +-cat confdefs.h >>conftest.$ac_ext
1.10064 +-cat >>conftest.$ac_ext <<_ACEOF
1.10065 +-/* end confdefs.h. */
1.10066 +-$ac_declaration
1.10067 +-int
1.10068 +-main ()
1.10069 +-{
1.10070 +-exit (42);
1.10071 +- ;
1.10072 +- return 0;
1.10073 +-}
1.10074 +-_ACEOF
1.10075 +-rm -f conftest.$ac_objext
1.10076 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.10077 +- (eval $ac_compile) 2>conftest.er1
1.10078 +- ac_status=$?
1.10079 +- grep -v '^ *+' conftest.er1 >conftest.err
1.10080 +- rm -f conftest.er1
1.10081 +- cat conftest.err >&5
1.10082 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.10083 +- (exit $ac_status); } &&
1.10084 +- { ac_try='test -z "$ac_c_werror_flag"
1.10085 +- || test ! -s conftest.err'
1.10086 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.10087 +- (eval $ac_try) 2>&5
1.10088 +- ac_status=$?
1.10089 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.10090 +- (exit $ac_status); }; } &&
1.10091 +- { ac_try='test -s conftest.$ac_objext'
1.10092 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.10093 +- (eval $ac_try) 2>&5
1.10094 +- ac_status=$?
1.10095 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.10096 +- (exit $ac_status); }; }; then
1.10097 +- break
1.10098 +-else
1.10099 +- echo "$as_me: failed program was:" >&5
1.10100 +-sed 's/^/| /' conftest.$ac_ext >&5
1.10101 +-
1.10102 +-fi
1.10103 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.10104 +-done
1.10105 +-rm -f conftest*
1.10106 +-if test -n "$ac_declaration"; then
1.10107 +- echo '#ifdef __cplusplus' >>confdefs.h
1.10108 +- echo $ac_declaration >>confdefs.h
1.10109 +- echo '#endif' >>confdefs.h
1.10110 +-fi
1.10111 +-
1.10112 +-else
1.10113 +- echo "$as_me: failed program was:" >&5
1.10114 +-sed 's/^/| /' conftest.$ac_ext >&5
1.10115 +-
1.10116 +-fi
1.10117 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.10118 + ac_ext=c
1.10119 + ac_cpp='$CPP $CPPFLAGS'
1.10120 + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.10121 +@@ -4378,8 +5112,8 @@
1.10122 +
1.10123 + depcc="$CC" am_compiler_list=
1.10124 +
1.10125 +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
1.10126 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
1.10127 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
1.10128 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
1.10129 + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
1.10130 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10131 + else
1.10132 +@@ -4461,58 +5195,273 @@
1.10133 + fi
1.10134 + done
1.10135 +
1.10136 +- cd ..
1.10137 +- rm -rf conftest.dir
1.10138 +-else
1.10139 +- am_cv_CC_dependencies_compiler_type=none
1.10140 +-fi
1.10141 ++ cd ..
1.10142 ++ rm -rf conftest.dir
1.10143 ++else
1.10144 ++ am_cv_CC_dependencies_compiler_type=none
1.10145 ++fi
1.10146 ++
1.10147 ++fi
1.10148 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
1.10149 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
1.10150 ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
1.10151 ++
1.10152 ++
1.10153 ++
1.10154 ++if
1.10155 ++ test "x$enable_dependency_tracking" != xno \
1.10156 ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
1.10157 ++ am__fastdepCC_TRUE=
1.10158 ++ am__fastdepCC_FALSE='#'
1.10159 ++else
1.10160 ++ am__fastdepCC_TRUE='#'
1.10161 ++ am__fastdepCC_FALSE=
1.10162 ++fi
1.10163 ++
1.10164 ++
1.10165 ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
1.10166 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
1.10167 ++if test "${ac_cv_path_GREP+set}" = set; then
1.10168 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.10169 ++else
1.10170 ++ # Extract the first word of "grep ggrep" to use in msg output
1.10171 ++if test -z "$GREP"; then
1.10172 ++set dummy grep ggrep; ac_prog_name=$2
1.10173 ++if test "${ac_cv_path_GREP+set}" = set; then
1.10174 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.10175 ++else
1.10176 ++ ac_path_GREP_found=false
1.10177 ++# Loop through the user's path and test for each of PROGNAME-LIST
1.10178 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.10179 ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
1.10180 ++do
1.10181 ++ IFS=$as_save_IFS
1.10182 ++ test -z "$as_dir" && as_dir=.
1.10183 ++ for ac_prog in grep ggrep; do
1.10184 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.10185 ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
1.10186 ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
1.10187 ++ # Check for GNU ac_path_GREP and select it if it is found.
1.10188 ++ # Check for GNU $ac_path_GREP
1.10189 ++case `"$ac_path_GREP" --version 2>&1` in
1.10190 ++*GNU*)
1.10191 ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
1.10192 ++*)
1.10193 ++ ac_count=0
1.10194 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
1.10195 ++ while :
1.10196 ++ do
1.10197 ++ cat "conftest.in" "conftest.in" >"conftest.tmp"
1.10198 ++ mv "conftest.tmp" "conftest.in"
1.10199 ++ cp "conftest.in" "conftest.nl"
1.10200 ++ echo 'GREP' >> "conftest.nl"
1.10201 ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
1.10202 ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
1.10203 ++ ac_count=`expr $ac_count + 1`
1.10204 ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then
1.10205 ++ # Best one so far, save it but keep looking for a better one
1.10206 ++ ac_cv_path_GREP="$ac_path_GREP"
1.10207 ++ ac_path_GREP_max=$ac_count
1.10208 ++ fi
1.10209 ++ # 10*(2^10) chars as input seems more than enough
1.10210 ++ test $ac_count -gt 10 && break
1.10211 ++ done
1.10212 ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
1.10213 ++esac
1.10214 ++
1.10215 ++
1.10216 ++ $ac_path_GREP_found && break 3
1.10217 ++ done
1.10218 ++done
1.10219 ++
1.10220 ++done
1.10221 ++IFS=$as_save_IFS
1.10222 ++
1.10223 ++
1.10224 ++fi
1.10225 ++
1.10226 ++GREP="$ac_cv_path_GREP"
1.10227 ++if test -z "$GREP"; then
1.10228 ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
1.10229 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
1.10230 ++ { (exit 1); exit 1; }; }
1.10231 ++fi
1.10232 ++
1.10233 ++else
1.10234 ++ ac_cv_path_GREP=$GREP
1.10235 ++fi
1.10236 ++
1.10237 ++
1.10238 ++fi
1.10239 ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
1.10240 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
1.10241 ++ GREP="$ac_cv_path_GREP"
1.10242 ++
1.10243 ++
1.10244 ++{ echo "$as_me:$LINENO: checking for egrep" >&5
1.10245 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
1.10246 ++if test "${ac_cv_path_EGREP+set}" = set; then
1.10247 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.10248 ++else
1.10249 ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
1.10250 ++ then ac_cv_path_EGREP="$GREP -E"
1.10251 ++ else
1.10252 ++ # Extract the first word of "egrep" to use in msg output
1.10253 ++if test -z "$EGREP"; then
1.10254 ++set dummy egrep; ac_prog_name=$2
1.10255 ++if test "${ac_cv_path_EGREP+set}" = set; then
1.10256 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.10257 ++else
1.10258 ++ ac_path_EGREP_found=false
1.10259 ++# Loop through the user's path and test for each of PROGNAME-LIST
1.10260 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.10261 ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
1.10262 ++do
1.10263 ++ IFS=$as_save_IFS
1.10264 ++ test -z "$as_dir" && as_dir=.
1.10265 ++ for ac_prog in egrep; do
1.10266 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.10267 ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
1.10268 ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
1.10269 ++ # Check for GNU ac_path_EGREP and select it if it is found.
1.10270 ++ # Check for GNU $ac_path_EGREP
1.10271 ++case `"$ac_path_EGREP" --version 2>&1` in
1.10272 ++*GNU*)
1.10273 ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
1.10274 ++*)
1.10275 ++ ac_count=0
1.10276 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
1.10277 ++ while :
1.10278 ++ do
1.10279 ++ cat "conftest.in" "conftest.in" >"conftest.tmp"
1.10280 ++ mv "conftest.tmp" "conftest.in"
1.10281 ++ cp "conftest.in" "conftest.nl"
1.10282 ++ echo 'EGREP' >> "conftest.nl"
1.10283 ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
1.10284 ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
1.10285 ++ ac_count=`expr $ac_count + 1`
1.10286 ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
1.10287 ++ # Best one so far, save it but keep looking for a better one
1.10288 ++ ac_cv_path_EGREP="$ac_path_EGREP"
1.10289 ++ ac_path_EGREP_max=$ac_count
1.10290 ++ fi
1.10291 ++ # 10*(2^10) chars as input seems more than enough
1.10292 ++ test $ac_count -gt 10 && break
1.10293 ++ done
1.10294 ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
1.10295 ++esac
1.10296 ++
1.10297 ++
1.10298 ++ $ac_path_EGREP_found && break 3
1.10299 ++ done
1.10300 ++done
1.10301 ++
1.10302 ++done
1.10303 ++IFS=$as_save_IFS
1.10304 ++
1.10305 ++
1.10306 ++fi
1.10307 ++
1.10308 ++EGREP="$ac_cv_path_EGREP"
1.10309 ++if test -z "$EGREP"; then
1.10310 ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
1.10311 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
1.10312 ++ { (exit 1); exit 1; }; }
1.10313 ++fi
1.10314 ++
1.10315 ++else
1.10316 ++ ac_cv_path_EGREP=$EGREP
1.10317 ++fi
1.10318 ++
1.10319 ++
1.10320 ++ fi
1.10321 ++fi
1.10322 ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
1.10323 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
1.10324 ++ EGREP="$ac_cv_path_EGREP"
1.10325 ++
1.10326 ++
1.10327 ++{ echo "$as_me:$LINENO: checking for fgrep" >&5
1.10328 ++echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; }
1.10329 ++if test "${ac_cv_path_FGREP+set}" = set; then
1.10330 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.10331 ++else
1.10332 ++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
1.10333 ++ then ac_cv_path_FGREP="$GREP -F"
1.10334 ++ else
1.10335 ++ # Extract the first word of "fgrep" to use in msg output
1.10336 ++if test -z "$FGREP"; then
1.10337 ++set dummy fgrep; ac_prog_name=$2
1.10338 ++if test "${ac_cv_path_FGREP+set}" = set; then
1.10339 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.10340 ++else
1.10341 ++ ac_path_FGREP_found=false
1.10342 ++# Loop through the user's path and test for each of PROGNAME-LIST
1.10343 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.10344 ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
1.10345 ++do
1.10346 ++ IFS=$as_save_IFS
1.10347 ++ test -z "$as_dir" && as_dir=.
1.10348 ++ for ac_prog in fgrep; do
1.10349 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.10350 ++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
1.10351 ++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
1.10352 ++ # Check for GNU ac_path_FGREP and select it if it is found.
1.10353 ++ # Check for GNU $ac_path_FGREP
1.10354 ++case `"$ac_path_FGREP" --version 2>&1` in
1.10355 ++*GNU*)
1.10356 ++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
1.10357 ++*)
1.10358 ++ ac_count=0
1.10359 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
1.10360 ++ while :
1.10361 ++ do
1.10362 ++ cat "conftest.in" "conftest.in" >"conftest.tmp"
1.10363 ++ mv "conftest.tmp" "conftest.in"
1.10364 ++ cp "conftest.in" "conftest.nl"
1.10365 ++ echo 'FGREP' >> "conftest.nl"
1.10366 ++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
1.10367 ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
1.10368 ++ ac_count=`expr $ac_count + 1`
1.10369 ++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
1.10370 ++ # Best one so far, save it but keep looking for a better one
1.10371 ++ ac_cv_path_FGREP="$ac_path_FGREP"
1.10372 ++ ac_path_FGREP_max=$ac_count
1.10373 ++ fi
1.10374 ++ # 10*(2^10) chars as input seems more than enough
1.10375 ++ test $ac_count -gt 10 && break
1.10376 ++ done
1.10377 ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
1.10378 ++esac
1.10379 ++
1.10380 +
1.10381 +-fi
1.10382 +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
1.10383 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
1.10384 +-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
1.10385 ++ $ac_path_FGREP_found && break 3
1.10386 ++ done
1.10387 ++done
1.10388 +
1.10389 ++done
1.10390 ++IFS=$as_save_IFS
1.10391 +
1.10392 +
1.10393 +-if
1.10394 +- test "x$enable_dependency_tracking" != xno \
1.10395 +- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
1.10396 +- am__fastdepCC_TRUE=
1.10397 +- am__fastdepCC_FALSE='#'
1.10398 +-else
1.10399 +- am__fastdepCC_TRUE='#'
1.10400 +- am__fastdepCC_FALSE=
1.10401 + fi
1.10402 +
1.10403 ++FGREP="$ac_cv_path_FGREP"
1.10404 ++if test -z "$FGREP"; then
1.10405 ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
1.10406 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
1.10407 ++ { (exit 1); exit 1; }; }
1.10408 ++fi
1.10409 +
1.10410 +-echo "$as_me:$LINENO: checking for egrep" >&5
1.10411 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
1.10412 +-if test "${ac_cv_prog_egrep+set}" = set; then
1.10413 +- echo $ECHO_N "(cached) $ECHO_C" >&6
1.10414 + else
1.10415 +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
1.10416 +- then ac_cv_prog_egrep='grep -E'
1.10417 +- else ac_cv_prog_egrep='egrep'
1.10418 +- fi
1.10419 ++ ac_cv_path_FGREP=$FGREP
1.10420 + fi
1.10421 +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
1.10422 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
1.10423 +- EGREP=$ac_cv_prog_egrep
1.10424 +
1.10425 +
1.10426 +-echo "$as_me:$LINENO: checking for fgrep" >&5
1.10427 +-echo $ECHO_N "checking for fgrep... $ECHO_C" >&6
1.10428 +-if test "${ac_cv_prog_fgrep+set}" = set; then
1.10429 +- echo $ECHO_N "(cached) $ECHO_C" >&6
1.10430 +-else
1.10431 +- if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1
1.10432 +- then ac_cv_prog_fgrep='grep -F'
1.10433 +- else ac_cv_prog_fgrep='fgrep'
1.10434 +- fi
1.10435 ++ fi
1.10436 + fi
1.10437 +-echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5
1.10438 +-echo "${ECHO_T}$ac_cv_prog_fgrep" >&6
1.10439 +- FGREP=$ac_cv_prog_fgrep
1.10440 ++{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
1.10441 ++echo "${ECHO_T}$ac_cv_path_FGREP" >&6; }
1.10442 ++ FGREP="$ac_cv_path_FGREP"
1.10443 +
1.10444 +
1.10445 + test -z "$GREP" && GREP=grep
1.10446 +@@ -4535,18 +5484,18 @@
1.10447 +
1.10448 +
1.10449 +
1.10450 +-# Check whether --with-gnu-ld or --without-gnu-ld was given.
1.10451 ++# Check whether --with-gnu-ld was given.
1.10452 + if test "${with_gnu_ld+set}" = set; then
1.10453 +- withval="$with_gnu_ld"
1.10454 +- test "$withval" = no || with_gnu_ld=yes
1.10455 ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
1.10456 + else
1.10457 + with_gnu_ld=no
1.10458 +-fi;
1.10459 ++fi
1.10460 ++
1.10461 + ac_prog=ld
1.10462 + if test "$GCC" = yes; then
1.10463 + # Check if gcc -print-prog-name=ld gives a path.
1.10464 +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5
1.10465 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
1.10466 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
1.10467 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
1.10468 + case $host in
1.10469 + *-*-mingw*)
1.10470 + # gcc leaves a trailing carriage return which upsets mingw
1.10471 +@@ -4575,11 +5524,11 @@
1.10472 + ;;
1.10473 + esac
1.10474 + elif test "$with_gnu_ld" = yes; then
1.10475 +- echo "$as_me:$LINENO: checking for GNU ld" >&5
1.10476 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
1.10477 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5
1.10478 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
1.10479 + else
1.10480 +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5
1.10481 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
1.10482 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
1.10483 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
1.10484 + fi
1.10485 + if test "${lt_cv_path_LD+set}" = set; then
1.10486 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10487 +@@ -4612,17 +5561,17 @@
1.10488 +
1.10489 + LD="$lt_cv_path_LD"
1.10490 + if test -n "$LD"; then
1.10491 +- echo "$as_me:$LINENO: result: $LD" >&5
1.10492 +-echo "${ECHO_T}$LD" >&6
1.10493 ++ { echo "$as_me:$LINENO: result: $LD" >&5
1.10494 ++echo "${ECHO_T}$LD" >&6; }
1.10495 + else
1.10496 +- echo "$as_me:$LINENO: result: no" >&5
1.10497 +-echo "${ECHO_T}no" >&6
1.10498 ++ { echo "$as_me:$LINENO: result: no" >&5
1.10499 ++echo "${ECHO_T}no" >&6; }
1.10500 + fi
1.10501 + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
1.10502 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
1.10503 + { (exit 1); exit 1; }; }
1.10504 +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
1.10505 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
1.10506 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
1.10507 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
1.10508 + if test "${lt_cv_prog_gnu_ld+set}" = set; then
1.10509 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10510 + else
1.10511 +@@ -4636,8 +5585,8 @@
1.10512 + ;;
1.10513 + esac
1.10514 + fi
1.10515 +-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
1.10516 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
1.10517 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
1.10518 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
1.10519 + with_gnu_ld=$lt_cv_prog_gnu_ld
1.10520 +
1.10521 +
1.10522 +@@ -4648,8 +5597,8 @@
1.10523 +
1.10524 +
1.10525 +
1.10526 +-echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
1.10527 +-echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6
1.10528 ++{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
1.10529 ++echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; }
1.10530 + if test "${lt_cv_path_NM+set}" = set; then
1.10531 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10532 + else
1.10533 +@@ -4697,8 +5646,8 @@
1.10534 + : ${lt_cv_path_NM=no}
1.10535 + fi
1.10536 + fi
1.10537 +-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
1.10538 +-echo "${ECHO_T}$lt_cv_path_NM" >&6
1.10539 ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
1.10540 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; }
1.10541 + if test "$lt_cv_path_NM" != "no"; then
1.10542 + NM="$lt_cv_path_NM"
1.10543 + else
1.10544 +@@ -4708,8 +5657,8 @@
1.10545 + do
1.10546 + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
1.10547 + set dummy $ac_tool_prefix$ac_prog; ac_word=$2
1.10548 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10549 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.10550 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10551 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.10552 + if test "${ac_cv_prog_DUMPBIN+set}" = set; then
1.10553 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10554 + else
1.10555 +@@ -4722,25 +5671,27 @@
1.10556 + IFS=$as_save_IFS
1.10557 + test -z "$as_dir" && as_dir=.
1.10558 + for ac_exec_ext in '' $ac_executable_extensions; do
1.10559 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.10560 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.10561 + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
1.10562 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.10563 + break 2
1.10564 + fi
1.10565 + done
1.10566 + done
1.10567 ++IFS=$as_save_IFS
1.10568 +
1.10569 + fi
1.10570 + fi
1.10571 + DUMPBIN=$ac_cv_prog_DUMPBIN
1.10572 + if test -n "$DUMPBIN"; then
1.10573 +- echo "$as_me:$LINENO: result: $DUMPBIN" >&5
1.10574 +-echo "${ECHO_T}$DUMPBIN" >&6
1.10575 ++ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5
1.10576 ++echo "${ECHO_T}$DUMPBIN" >&6; }
1.10577 + else
1.10578 +- echo "$as_me:$LINENO: result: no" >&5
1.10579 +-echo "${ECHO_T}no" >&6
1.10580 ++ { echo "$as_me:$LINENO: result: no" >&5
1.10581 ++echo "${ECHO_T}no" >&6; }
1.10582 + fi
1.10583 +
1.10584 ++
1.10585 + test -n "$DUMPBIN" && break
1.10586 + done
1.10587 + fi
1.10588 +@@ -4750,8 +5701,8 @@
1.10589 + do
1.10590 + # Extract the first word of "$ac_prog", so it can be a program name with args.
1.10591 + set dummy $ac_prog; ac_word=$2
1.10592 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10593 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.10594 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10595 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.10596 + if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
1.10597 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10598 + else
1.10599 +@@ -4764,30 +5715,45 @@
1.10600 + IFS=$as_save_IFS
1.10601 + test -z "$as_dir" && as_dir=.
1.10602 + for ac_exec_ext in '' $ac_executable_extensions; do
1.10603 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.10604 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.10605 + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
1.10606 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.10607 + break 2
1.10608 + fi
1.10609 + done
1.10610 + done
1.10611 ++IFS=$as_save_IFS
1.10612 +
1.10613 + fi
1.10614 + fi
1.10615 + ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
1.10616 + if test -n "$ac_ct_DUMPBIN"; then
1.10617 +- echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
1.10618 +-echo "${ECHO_T}$ac_ct_DUMPBIN" >&6
1.10619 ++ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
1.10620 ++echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; }
1.10621 + else
1.10622 +- echo "$as_me:$LINENO: result: no" >&5
1.10623 +-echo "${ECHO_T}no" >&6
1.10624 ++ { echo "$as_me:$LINENO: result: no" >&5
1.10625 ++echo "${ECHO_T}no" >&6; }
1.10626 + fi
1.10627 +
1.10628 ++
1.10629 + test -n "$ac_ct_DUMPBIN" && break
1.10630 + done
1.10631 +-test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":"
1.10632 +
1.10633 +- DUMPBIN=$ac_ct_DUMPBIN
1.10634 ++ if test "x$ac_ct_DUMPBIN" = x; then
1.10635 ++ DUMPBIN=":"
1.10636 ++ else
1.10637 ++ case $cross_compiling:$ac_tool_warned in
1.10638 ++yes:)
1.10639 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.10640 ++whose name does not start with the host triplet. If you think this
1.10641 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.10642 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.10643 ++whose name does not start with the host triplet. If you think this
1.10644 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.10645 ++ac_tool_warned=yes ;;
1.10646 ++esac
1.10647 ++ DUMPBIN=$ac_ct_DUMPBIN
1.10648 ++ fi
1.10649 + fi
1.10650 +
1.10651 +
1.10652 +@@ -4802,43 +5768,43 @@
1.10653 +
1.10654 +
1.10655 +
1.10656 +-echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
1.10657 +-echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6
1.10658 ++{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
1.10659 ++echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; }
1.10660 + if test "${lt_cv_nm_interface+set}" = set; then
1.10661 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10662 + else
1.10663 + lt_cv_nm_interface="BSD nm"
1.10664 + echo "int some_variable = 0;" > conftest.$ac_ext
1.10665 +- (eval echo "\"\$as_me:4812: $ac_compile\"" >&5)
1.10666 ++ (eval echo "\"\$as_me:5778: $ac_compile\"" >&5)
1.10667 + (eval "$ac_compile" 2>conftest.err)
1.10668 + cat conftest.err >&5
1.10669 +- (eval echo "\"\$as_me:4815: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
1.10670 ++ (eval echo "\"\$as_me:5781: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
1.10671 + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
1.10672 + cat conftest.err >&5
1.10673 +- (eval echo "\"\$as_me:4818: output\"" >&5)
1.10674 ++ (eval echo "\"\$as_me:5784: output\"" >&5)
1.10675 + cat conftest.out >&5
1.10676 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then
1.10677 + lt_cv_nm_interface="MS dumpbin"
1.10678 + fi
1.10679 + rm -f conftest*
1.10680 + fi
1.10681 +-echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
1.10682 +-echo "${ECHO_T}$lt_cv_nm_interface" >&6
1.10683 ++{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
1.10684 ++echo "${ECHO_T}$lt_cv_nm_interface" >&6; }
1.10685 +
1.10686 +-echo "$as_me:$LINENO: checking whether ln -s works" >&5
1.10687 +-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
1.10688 ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
1.10689 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
1.10690 + LN_S=$as_ln_s
1.10691 + if test "$LN_S" = "ln -s"; then
1.10692 +- echo "$as_me:$LINENO: result: yes" >&5
1.10693 +-echo "${ECHO_T}yes" >&6
1.10694 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.10695 ++echo "${ECHO_T}yes" >&6; }
1.10696 + else
1.10697 +- echo "$as_me:$LINENO: result: no, using $LN_S" >&5
1.10698 +-echo "${ECHO_T}no, using $LN_S" >&6
1.10699 ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
1.10700 ++echo "${ECHO_T}no, using $LN_S" >&6; }
1.10701 + fi
1.10702 +
1.10703 + # find the maximum length of command line arguments
1.10704 +-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
1.10705 +-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
1.10706 ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
1.10707 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
1.10708 + if test "${lt_cv_sys_max_cmd_len+set}" = set; then
1.10709 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10710 + else
1.10711 +@@ -4957,11 +5923,11 @@
1.10712 + fi
1.10713 +
1.10714 + if test -n $lt_cv_sys_max_cmd_len ; then
1.10715 +- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
1.10716 +-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
1.10717 ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
1.10718 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
1.10719 + else
1.10720 +- echo "$as_me:$LINENO: result: none" >&5
1.10721 +-echo "${ECHO_T}none" >&6
1.10722 ++ { echo "$as_me:$LINENO: result: none" >&5
1.10723 ++echo "${ECHO_T}none" >&6; }
1.10724 + fi
1.10725 + max_cmd_len=$lt_cv_sys_max_cmd_len
1.10726 +
1.10727 +@@ -4974,8 +5940,8 @@
1.10728 + : ${MV="mv -f"}
1.10729 + : ${RM="rm -f"}
1.10730 +
1.10731 +-echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
1.10732 +-echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6
1.10733 ++{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
1.10734 ++echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; }
1.10735 + # Try some XSI features
1.10736 + xsi_shell=no
1.10737 + ( _lt_dummy="a/b/c"
1.10738 +@@ -4984,18 +5950,18 @@
1.10739 + && eval 'test $(( 1 + 1 )) -eq 2 \
1.10740 + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
1.10741 + && xsi_shell=yes
1.10742 +-echo "$as_me:$LINENO: result: $xsi_shell" >&5
1.10743 +-echo "${ECHO_T}$xsi_shell" >&6
1.10744 ++{ echo "$as_me:$LINENO: result: $xsi_shell" >&5
1.10745 ++echo "${ECHO_T}$xsi_shell" >&6; }
1.10746 +
1.10747 +
1.10748 +-echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
1.10749 +-echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6
1.10750 ++{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
1.10751 ++echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; }
1.10752 + lt_shell_append=no
1.10753 + ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
1.10754 + >/dev/null 2>&1 \
1.10755 + && lt_shell_append=yes
1.10756 +-echo "$as_me:$LINENO: result: $lt_shell_append" >&5
1.10757 +-echo "${ECHO_T}$lt_shell_append" >&6
1.10758 ++{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5
1.10759 ++echo "${ECHO_T}$lt_shell_append" >&6; }
1.10760 +
1.10761 +
1.10762 + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.10763 +@@ -5029,15 +5995,15 @@
1.10764 +
1.10765 +
1.10766 +
1.10767 +-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
1.10768 +-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
1.10769 ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
1.10770 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
1.10771 + if test "${lt_cv_ld_reload_flag+set}" = set; then
1.10772 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10773 + else
1.10774 + lt_cv_ld_reload_flag='-r'
1.10775 + fi
1.10776 +-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
1.10777 +-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
1.10778 ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
1.10779 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
1.10780 + reload_flag=$lt_cv_ld_reload_flag
1.10781 + case $reload_flag in
1.10782 + "" | " "*) ;;
1.10783 +@@ -5065,8 +6031,8 @@
1.10784 + if test -n "$ac_tool_prefix"; then
1.10785 + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
1.10786 + set dummy ${ac_tool_prefix}objdump; ac_word=$2
1.10787 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10788 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.10789 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10790 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.10791 + if test "${ac_cv_prog_OBJDUMP+set}" = set; then
1.10792 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10793 + else
1.10794 +@@ -5079,32 +6045,34 @@
1.10795 + IFS=$as_save_IFS
1.10796 + test -z "$as_dir" && as_dir=.
1.10797 + for ac_exec_ext in '' $ac_executable_extensions; do
1.10798 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.10799 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.10800 + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
1.10801 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.10802 + break 2
1.10803 + fi
1.10804 + done
1.10805 + done
1.10806 ++IFS=$as_save_IFS
1.10807 +
1.10808 + fi
1.10809 + fi
1.10810 + OBJDUMP=$ac_cv_prog_OBJDUMP
1.10811 + if test -n "$OBJDUMP"; then
1.10812 +- echo "$as_me:$LINENO: result: $OBJDUMP" >&5
1.10813 +-echo "${ECHO_T}$OBJDUMP" >&6
1.10814 ++ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
1.10815 ++echo "${ECHO_T}$OBJDUMP" >&6; }
1.10816 + else
1.10817 +- echo "$as_me:$LINENO: result: no" >&5
1.10818 +-echo "${ECHO_T}no" >&6
1.10819 ++ { echo "$as_me:$LINENO: result: no" >&5
1.10820 ++echo "${ECHO_T}no" >&6; }
1.10821 + fi
1.10822 +
1.10823 ++
1.10824 + fi
1.10825 + if test -z "$ac_cv_prog_OBJDUMP"; then
1.10826 + ac_ct_OBJDUMP=$OBJDUMP
1.10827 + # Extract the first word of "objdump", so it can be a program name with args.
1.10828 + set dummy objdump; ac_word=$2
1.10829 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10830 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.10831 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10832 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.10833 + if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
1.10834 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10835 + else
1.10836 +@@ -5117,27 +6085,41 @@
1.10837 + IFS=$as_save_IFS
1.10838 + test -z "$as_dir" && as_dir=.
1.10839 + for ac_exec_ext in '' $ac_executable_extensions; do
1.10840 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.10841 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.10842 + ac_cv_prog_ac_ct_OBJDUMP="objdump"
1.10843 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.10844 + break 2
1.10845 + fi
1.10846 + done
1.10847 + done
1.10848 ++IFS=$as_save_IFS
1.10849 +
1.10850 +- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
1.10851 + fi
1.10852 + fi
1.10853 + ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
1.10854 + if test -n "$ac_ct_OBJDUMP"; then
1.10855 +- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
1.10856 +-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
1.10857 ++ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
1.10858 ++echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
1.10859 + else
1.10860 +- echo "$as_me:$LINENO: result: no" >&5
1.10861 +-echo "${ECHO_T}no" >&6
1.10862 ++ { echo "$as_me:$LINENO: result: no" >&5
1.10863 ++echo "${ECHO_T}no" >&6; }
1.10864 + fi
1.10865 +
1.10866 +- OBJDUMP=$ac_ct_OBJDUMP
1.10867 ++ if test "x$ac_ct_OBJDUMP" = x; then
1.10868 ++ OBJDUMP="false"
1.10869 ++ else
1.10870 ++ case $cross_compiling:$ac_tool_warned in
1.10871 ++yes:)
1.10872 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.10873 ++whose name does not start with the host triplet. If you think this
1.10874 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.10875 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.10876 ++whose name does not start with the host triplet. If you think this
1.10877 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.10878 ++ac_tool_warned=yes ;;
1.10879 ++esac
1.10880 ++ OBJDUMP=$ac_ct_OBJDUMP
1.10881 ++ fi
1.10882 + else
1.10883 + OBJDUMP="$ac_cv_prog_OBJDUMP"
1.10884 + fi
1.10885 +@@ -5149,8 +6131,8 @@
1.10886 +
1.10887 +
1.10888 +
1.10889 +-echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
1.10890 +-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6
1.10891 ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
1.10892 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
1.10893 + if test "${lt_cv_deplibs_check_method+set}" = set; then
1.10894 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10895 + else
1.10896 +@@ -5345,8 +6327,8 @@
1.10897 + esac
1.10898 +
1.10899 + fi
1.10900 +-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
1.10901 +-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
1.10902 ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
1.10903 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
1.10904 + file_magic_cmd=$lt_cv_file_magic_cmd
1.10905 + deplibs_check_method=$lt_cv_deplibs_check_method
1.10906 + test -z "$deplibs_check_method" && deplibs_check_method=unknown
1.10907 +@@ -5365,8 +6347,8 @@
1.10908 + if test -n "$ac_tool_prefix"; then
1.10909 + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
1.10910 + set dummy ${ac_tool_prefix}ar; ac_word=$2
1.10911 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10912 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.10913 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10914 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.10915 + if test "${ac_cv_prog_AR+set}" = set; then
1.10916 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10917 + else
1.10918 +@@ -5379,32 +6361,34 @@
1.10919 + IFS=$as_save_IFS
1.10920 + test -z "$as_dir" && as_dir=.
1.10921 + for ac_exec_ext in '' $ac_executable_extensions; do
1.10922 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.10923 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.10924 + ac_cv_prog_AR="${ac_tool_prefix}ar"
1.10925 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.10926 + break 2
1.10927 + fi
1.10928 + done
1.10929 + done
1.10930 ++IFS=$as_save_IFS
1.10931 +
1.10932 + fi
1.10933 + fi
1.10934 + AR=$ac_cv_prog_AR
1.10935 + if test -n "$AR"; then
1.10936 +- echo "$as_me:$LINENO: result: $AR" >&5
1.10937 +-echo "${ECHO_T}$AR" >&6
1.10938 ++ { echo "$as_me:$LINENO: result: $AR" >&5
1.10939 ++echo "${ECHO_T}$AR" >&6; }
1.10940 + else
1.10941 +- echo "$as_me:$LINENO: result: no" >&5
1.10942 +-echo "${ECHO_T}no" >&6
1.10943 ++ { echo "$as_me:$LINENO: result: no" >&5
1.10944 ++echo "${ECHO_T}no" >&6; }
1.10945 + fi
1.10946 +
1.10947 ++
1.10948 + fi
1.10949 + if test -z "$ac_cv_prog_AR"; then
1.10950 + ac_ct_AR=$AR
1.10951 + # Extract the first word of "ar", so it can be a program name with args.
1.10952 + set dummy ar; ac_word=$2
1.10953 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10954 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.10955 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.10956 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.10957 + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
1.10958 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.10959 + else
1.10960 +@@ -5417,27 +6401,41 @@
1.10961 + IFS=$as_save_IFS
1.10962 + test -z "$as_dir" && as_dir=.
1.10963 + for ac_exec_ext in '' $ac_executable_extensions; do
1.10964 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.10965 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.10966 + ac_cv_prog_ac_ct_AR="ar"
1.10967 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.10968 + break 2
1.10969 + fi
1.10970 + done
1.10971 + done
1.10972 ++IFS=$as_save_IFS
1.10973 +
1.10974 +- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
1.10975 + fi
1.10976 + fi
1.10977 + ac_ct_AR=$ac_cv_prog_ac_ct_AR
1.10978 + if test -n "$ac_ct_AR"; then
1.10979 +- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.10980 +-echo "${ECHO_T}$ac_ct_AR" >&6
1.10981 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.10982 ++echo "${ECHO_T}$ac_ct_AR" >&6; }
1.10983 + else
1.10984 +- echo "$as_me:$LINENO: result: no" >&5
1.10985 +-echo "${ECHO_T}no" >&6
1.10986 ++ { echo "$as_me:$LINENO: result: no" >&5
1.10987 ++echo "${ECHO_T}no" >&6; }
1.10988 + fi
1.10989 +
1.10990 +- AR=$ac_ct_AR
1.10991 ++ if test "x$ac_ct_AR" = x; then
1.10992 ++ AR="false"
1.10993 ++ else
1.10994 ++ case $cross_compiling:$ac_tool_warned in
1.10995 ++yes:)
1.10996 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.10997 ++whose name does not start with the host triplet. If you think this
1.10998 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.10999 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.11000 ++whose name does not start with the host triplet. If you think this
1.11001 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.11002 ++ac_tool_warned=yes ;;
1.11003 ++esac
1.11004 ++ AR=$ac_ct_AR
1.11005 ++ fi
1.11006 + else
1.11007 + AR="$ac_cv_prog_AR"
1.11008 + fi
1.11009 +@@ -5458,8 +6456,8 @@
1.11010 + if test -n "$ac_tool_prefix"; then
1.11011 + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
1.11012 + set dummy ${ac_tool_prefix}strip; ac_word=$2
1.11013 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11014 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11015 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11016 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11017 + if test "${ac_cv_prog_STRIP+set}" = set; then
1.11018 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11019 + else
1.11020 +@@ -5472,32 +6470,34 @@
1.11021 + IFS=$as_save_IFS
1.11022 + test -z "$as_dir" && as_dir=.
1.11023 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11024 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11025 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11026 + ac_cv_prog_STRIP="${ac_tool_prefix}strip"
1.11027 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11028 + break 2
1.11029 + fi
1.11030 + done
1.11031 + done
1.11032 ++IFS=$as_save_IFS
1.11033 +
1.11034 + fi
1.11035 + fi
1.11036 + STRIP=$ac_cv_prog_STRIP
1.11037 + if test -n "$STRIP"; then
1.11038 +- echo "$as_me:$LINENO: result: $STRIP" >&5
1.11039 +-echo "${ECHO_T}$STRIP" >&6
1.11040 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5
1.11041 ++echo "${ECHO_T}$STRIP" >&6; }
1.11042 + else
1.11043 +- echo "$as_me:$LINENO: result: no" >&5
1.11044 +-echo "${ECHO_T}no" >&6
1.11045 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11046 ++echo "${ECHO_T}no" >&6; }
1.11047 + fi
1.11048 +
1.11049 ++
1.11050 + fi
1.11051 + if test -z "$ac_cv_prog_STRIP"; then
1.11052 + ac_ct_STRIP=$STRIP
1.11053 + # Extract the first word of "strip", so it can be a program name with args.
1.11054 + set dummy strip; ac_word=$2
1.11055 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11056 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11057 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11058 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11059 + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
1.11060 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11061 + else
1.11062 +@@ -5510,27 +6510,41 @@
1.11063 + IFS=$as_save_IFS
1.11064 + test -z "$as_dir" && as_dir=.
1.11065 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11066 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11067 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11068 + ac_cv_prog_ac_ct_STRIP="strip"
1.11069 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11070 + break 2
1.11071 + fi
1.11072 + done
1.11073 + done
1.11074 ++IFS=$as_save_IFS
1.11075 +
1.11076 +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
1.11077 + fi
1.11078 + fi
1.11079 + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
1.11080 + if test -n "$ac_ct_STRIP"; then
1.11081 +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
1.11082 +-echo "${ECHO_T}$ac_ct_STRIP" >&6
1.11083 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
1.11084 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; }
1.11085 + else
1.11086 +- echo "$as_me:$LINENO: result: no" >&5
1.11087 +-echo "${ECHO_T}no" >&6
1.11088 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11089 ++echo "${ECHO_T}no" >&6; }
1.11090 + fi
1.11091 +
1.11092 +- STRIP=$ac_ct_STRIP
1.11093 ++ if test "x$ac_ct_STRIP" = x; then
1.11094 ++ STRIP=":"
1.11095 ++ else
1.11096 ++ case $cross_compiling:$ac_tool_warned in
1.11097 ++yes:)
1.11098 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.11099 ++whose name does not start with the host triplet. If you think this
1.11100 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.11101 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.11102 ++whose name does not start with the host triplet. If you think this
1.11103 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.11104 ++ac_tool_warned=yes ;;
1.11105 ++esac
1.11106 ++ STRIP=$ac_ct_STRIP
1.11107 ++ fi
1.11108 + else
1.11109 + STRIP="$ac_cv_prog_STRIP"
1.11110 + fi
1.11111 +@@ -5545,8 +6559,8 @@
1.11112 + if test -n "$ac_tool_prefix"; then
1.11113 + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
1.11114 + set dummy ${ac_tool_prefix}ranlib; ac_word=$2
1.11115 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11116 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11117 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11118 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11119 + if test "${ac_cv_prog_RANLIB+set}" = set; then
1.11120 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11121 + else
1.11122 +@@ -5559,32 +6573,34 @@
1.11123 + IFS=$as_save_IFS
1.11124 + test -z "$as_dir" && as_dir=.
1.11125 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11126 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11127 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11128 + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
1.11129 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11130 + break 2
1.11131 + fi
1.11132 + done
1.11133 + done
1.11134 ++IFS=$as_save_IFS
1.11135 +
1.11136 + fi
1.11137 + fi
1.11138 + RANLIB=$ac_cv_prog_RANLIB
1.11139 + if test -n "$RANLIB"; then
1.11140 +- echo "$as_me:$LINENO: result: $RANLIB" >&5
1.11141 +-echo "${ECHO_T}$RANLIB" >&6
1.11142 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5
1.11143 ++echo "${ECHO_T}$RANLIB" >&6; }
1.11144 + else
1.11145 +- echo "$as_me:$LINENO: result: no" >&5
1.11146 +-echo "${ECHO_T}no" >&6
1.11147 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11148 ++echo "${ECHO_T}no" >&6; }
1.11149 + fi
1.11150 +
1.11151 ++
1.11152 + fi
1.11153 + if test -z "$ac_cv_prog_RANLIB"; then
1.11154 + ac_ct_RANLIB=$RANLIB
1.11155 + # Extract the first word of "ranlib", so it can be a program name with args.
1.11156 + set dummy ranlib; ac_word=$2
1.11157 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11158 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11159 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11160 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11161 + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
1.11162 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11163 + else
1.11164 +@@ -5597,27 +6613,41 @@
1.11165 + IFS=$as_save_IFS
1.11166 + test -z "$as_dir" && as_dir=.
1.11167 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11168 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11169 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11170 + ac_cv_prog_ac_ct_RANLIB="ranlib"
1.11171 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11172 + break 2
1.11173 + fi
1.11174 + done
1.11175 + done
1.11176 ++IFS=$as_save_IFS
1.11177 +
1.11178 +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
1.11179 + fi
1.11180 + fi
1.11181 + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
1.11182 + if test -n "$ac_ct_RANLIB"; then
1.11183 +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.11184 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6
1.11185 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.11186 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
1.11187 + else
1.11188 +- echo "$as_me:$LINENO: result: no" >&5
1.11189 +-echo "${ECHO_T}no" >&6
1.11190 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11191 ++echo "${ECHO_T}no" >&6; }
1.11192 + fi
1.11193 +
1.11194 +- RANLIB=$ac_ct_RANLIB
1.11195 ++ if test "x$ac_ct_RANLIB" = x; then
1.11196 ++ RANLIB=":"
1.11197 ++ else
1.11198 ++ case $cross_compiling:$ac_tool_warned in
1.11199 ++yes:)
1.11200 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.11201 ++whose name does not start with the host triplet. If you think this
1.11202 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.11203 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.11204 ++whose name does not start with the host triplet. If you think this
1.11205 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.11206 ++ac_tool_warned=yes ;;
1.11207 ++esac
1.11208 ++ RANLIB=$ac_ct_RANLIB
1.11209 ++ fi
1.11210 + else
1.11211 + RANLIB="$ac_cv_prog_RANLIB"
1.11212 + fi
1.11213 +@@ -5690,8 +6720,8 @@
1.11214 +
1.11215 +
1.11216 + # Check for command to grab the raw symbol name followed by C symbol from nm.
1.11217 +-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
1.11218 +-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
1.11219 ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
1.11220 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
1.11221 + if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
1.11222 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11223 + else
1.11224 +@@ -5910,11 +6940,11 @@
1.11225 + lt_cv_sys_global_symbol_to_cdecl=
1.11226 + fi
1.11227 + if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
1.11228 +- echo "$as_me:$LINENO: result: failed" >&5
1.11229 +-echo "${ECHO_T}failed" >&6
1.11230 ++ { echo "$as_me:$LINENO: result: failed" >&5
1.11231 ++echo "${ECHO_T}failed" >&6; }
1.11232 + else
1.11233 +- echo "$as_me:$LINENO: result: ok" >&5
1.11234 +-echo "${ECHO_T}ok" >&6
1.11235 ++ { echo "$as_me:$LINENO: result: ok" >&5
1.11236 ++echo "${ECHO_T}ok" >&6; }
1.11237 + fi
1.11238 +
1.11239 +
1.11240 +@@ -5939,11 +6969,11 @@
1.11241 +
1.11242 +
1.11243 +
1.11244 +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
1.11245 ++# Check whether --enable-libtool-lock was given.
1.11246 + if test "${enable_libtool_lock+set}" = set; then
1.11247 +- enableval="$enable_libtool_lock"
1.11248 ++ enableval=$enable_libtool_lock;
1.11249 ++fi
1.11250 +
1.11251 +-fi;
1.11252 + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
1.11253 +
1.11254 + # Some flags need to be propagated to the compiler or linker for good
1.11255 +@@ -5970,7 +7000,7 @@
1.11256 + ;;
1.11257 + *-*-irix6*)
1.11258 + # Find out which ABI we are using.
1.11259 +- echo '#line 5973 "configure"' > conftest.$ac_ext
1.11260 ++ echo '#line 7003 "configure"' > conftest.$ac_ext
1.11261 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.11262 + (eval $ac_compile) 2>&5
1.11263 + ac_status=$?
1.11264 +@@ -6062,8 +7092,8 @@
1.11265 + # On SCO OpenServer 5, we need -belf to get full-featured binaries.
1.11266 + SAVE_CFLAGS="$CFLAGS"
1.11267 + CFLAGS="$CFLAGS -belf"
1.11268 +- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
1.11269 +-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
1.11270 ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
1.11271 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
1.11272 + if test "${lt_cv_cc_needs_belf+set}" = set; then
1.11273 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11274 + else
1.11275 +@@ -6089,35 +7119,32 @@
1.11276 + }
1.11277 + _ACEOF
1.11278 + rm -f conftest.$ac_objext conftest$ac_exeext
1.11279 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.11280 +- (eval $ac_link) 2>conftest.er1
1.11281 ++if { (ac_try="$ac_link"
1.11282 ++case "(($ac_try" in
1.11283 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.11284 ++ *) ac_try_echo=$ac_try;;
1.11285 ++esac
1.11286 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.11287 ++ (eval "$ac_link") 2>conftest.er1
1.11288 + ac_status=$?
1.11289 + grep -v '^ *+' conftest.er1 >conftest.err
1.11290 + rm -f conftest.er1
1.11291 + cat conftest.err >&5
1.11292 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.11293 +- (exit $ac_status); } &&
1.11294 +- { ac_try='test -z "$ac_c_werror_flag"
1.11295 +- || test ! -s conftest.err'
1.11296 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.11297 +- (eval $ac_try) 2>&5
1.11298 +- ac_status=$?
1.11299 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.11300 +- (exit $ac_status); }; } &&
1.11301 +- { ac_try='test -s conftest$ac_exeext'
1.11302 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.11303 +- (eval $ac_try) 2>&5
1.11304 +- ac_status=$?
1.11305 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.11306 +- (exit $ac_status); }; }; then
1.11307 ++ (exit $ac_status); } && {
1.11308 ++ test -z "$ac_c_werror_flag" ||
1.11309 ++ test ! -s conftest.err
1.11310 ++ } && test -s conftest$ac_exeext &&
1.11311 ++ $as_test_x conftest$ac_exeext; then
1.11312 + lt_cv_cc_needs_belf=yes
1.11313 + else
1.11314 + echo "$as_me: failed program was:" >&5
1.11315 + sed 's/^/| /' conftest.$ac_ext >&5
1.11316 +
1.11317 +-lt_cv_cc_needs_belf=no
1.11318 ++ lt_cv_cc_needs_belf=no
1.11319 + fi
1.11320 +-rm -f conftest.err conftest.$ac_objext \
1.11321 ++
1.11322 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.11323 + conftest$ac_exeext conftest.$ac_ext
1.11324 + ac_ext=c
1.11325 + ac_cpp='$CPP $CPPFLAGS'
1.11326 +@@ -6126,8 +7153,8 @@
1.11327 + ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.11328 +
1.11329 + fi
1.11330 +-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
1.11331 +-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
1.11332 ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
1.11333 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
1.11334 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then
1.11335 + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
1.11336 + CFLAGS="$SAVE_CFLAGS"
1.11337 +@@ -6166,8 +7193,8 @@
1.11338 + if test -n "$ac_tool_prefix"; then
1.11339 + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
1.11340 + set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
1.11341 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11342 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11343 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11344 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11345 + if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
1.11346 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11347 + else
1.11348 +@@ -6180,32 +7207,34 @@
1.11349 + IFS=$as_save_IFS
1.11350 + test -z "$as_dir" && as_dir=.
1.11351 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11352 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11353 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11354 + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
1.11355 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11356 + break 2
1.11357 + fi
1.11358 + done
1.11359 + done
1.11360 ++IFS=$as_save_IFS
1.11361 +
1.11362 + fi
1.11363 + fi
1.11364 + DSYMUTIL=$ac_cv_prog_DSYMUTIL
1.11365 + if test -n "$DSYMUTIL"; then
1.11366 +- echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
1.11367 +-echo "${ECHO_T}$DSYMUTIL" >&6
1.11368 ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
1.11369 ++echo "${ECHO_T}$DSYMUTIL" >&6; }
1.11370 + else
1.11371 +- echo "$as_me:$LINENO: result: no" >&5
1.11372 +-echo "${ECHO_T}no" >&6
1.11373 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11374 ++echo "${ECHO_T}no" >&6; }
1.11375 + fi
1.11376 +
1.11377 ++
1.11378 + fi
1.11379 + if test -z "$ac_cv_prog_DSYMUTIL"; then
1.11380 + ac_ct_DSYMUTIL=$DSYMUTIL
1.11381 + # Extract the first word of "dsymutil", so it can be a program name with args.
1.11382 + set dummy dsymutil; ac_word=$2
1.11383 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11384 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11385 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11386 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11387 + if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
1.11388 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11389 + else
1.11390 +@@ -6218,27 +7247,41 @@
1.11391 + IFS=$as_save_IFS
1.11392 + test -z "$as_dir" && as_dir=.
1.11393 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11394 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11395 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11396 + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
1.11397 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11398 + break 2
1.11399 + fi
1.11400 + done
1.11401 + done
1.11402 ++IFS=$as_save_IFS
1.11403 +
1.11404 +- test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":"
1.11405 + fi
1.11406 + fi
1.11407 + ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
1.11408 + if test -n "$ac_ct_DSYMUTIL"; then
1.11409 +- echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
1.11410 +-echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6
1.11411 ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
1.11412 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
1.11413 + else
1.11414 +- echo "$as_me:$LINENO: result: no" >&5
1.11415 +-echo "${ECHO_T}no" >&6
1.11416 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11417 ++echo "${ECHO_T}no" >&6; }
1.11418 + fi
1.11419 +
1.11420 +- DSYMUTIL=$ac_ct_DSYMUTIL
1.11421 ++ if test "x$ac_ct_DSYMUTIL" = x; then
1.11422 ++ DSYMUTIL=":"
1.11423 ++ else
1.11424 ++ case $cross_compiling:$ac_tool_warned in
1.11425 ++yes:)
1.11426 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.11427 ++whose name does not start with the host triplet. If you think this
1.11428 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.11429 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.11430 ++whose name does not start with the host triplet. If you think this
1.11431 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.11432 ++ac_tool_warned=yes ;;
1.11433 ++esac
1.11434 ++ DSYMUTIL=$ac_ct_DSYMUTIL
1.11435 ++ fi
1.11436 + else
1.11437 + DSYMUTIL="$ac_cv_prog_DSYMUTIL"
1.11438 + fi
1.11439 +@@ -6246,8 +7289,8 @@
1.11440 + if test -n "$ac_tool_prefix"; then
1.11441 + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
1.11442 + set dummy ${ac_tool_prefix}nmedit; ac_word=$2
1.11443 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11444 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11445 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11446 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11447 + if test "${ac_cv_prog_NMEDIT+set}" = set; then
1.11448 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11449 + else
1.11450 +@@ -6260,32 +7303,34 @@
1.11451 + IFS=$as_save_IFS
1.11452 + test -z "$as_dir" && as_dir=.
1.11453 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11454 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11455 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11456 + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
1.11457 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11458 + break 2
1.11459 + fi
1.11460 + done
1.11461 + done
1.11462 ++IFS=$as_save_IFS
1.11463 +
1.11464 + fi
1.11465 + fi
1.11466 + NMEDIT=$ac_cv_prog_NMEDIT
1.11467 + if test -n "$NMEDIT"; then
1.11468 +- echo "$as_me:$LINENO: result: $NMEDIT" >&5
1.11469 +-echo "${ECHO_T}$NMEDIT" >&6
1.11470 ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5
1.11471 ++echo "${ECHO_T}$NMEDIT" >&6; }
1.11472 + else
1.11473 +- echo "$as_me:$LINENO: result: no" >&5
1.11474 +-echo "${ECHO_T}no" >&6
1.11475 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11476 ++echo "${ECHO_T}no" >&6; }
1.11477 + fi
1.11478 +
1.11479 ++
1.11480 + fi
1.11481 + if test -z "$ac_cv_prog_NMEDIT"; then
1.11482 + ac_ct_NMEDIT=$NMEDIT
1.11483 + # Extract the first word of "nmedit", so it can be a program name with args.
1.11484 + set dummy nmedit; ac_word=$2
1.11485 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11486 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11487 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11488 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11489 + if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
1.11490 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11491 + else
1.11492 +@@ -6298,27 +7343,41 @@
1.11493 + IFS=$as_save_IFS
1.11494 + test -z "$as_dir" && as_dir=.
1.11495 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11496 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11497 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11498 + ac_cv_prog_ac_ct_NMEDIT="nmedit"
1.11499 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11500 + break 2
1.11501 + fi
1.11502 + done
1.11503 + done
1.11504 ++IFS=$as_save_IFS
1.11505 +
1.11506 +- test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":"
1.11507 + fi
1.11508 + fi
1.11509 + ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
1.11510 + if test -n "$ac_ct_NMEDIT"; then
1.11511 +- echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
1.11512 +-echo "${ECHO_T}$ac_ct_NMEDIT" >&6
1.11513 ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
1.11514 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
1.11515 + else
1.11516 +- echo "$as_me:$LINENO: result: no" >&5
1.11517 +-echo "${ECHO_T}no" >&6
1.11518 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11519 ++echo "${ECHO_T}no" >&6; }
1.11520 + fi
1.11521 +
1.11522 +- NMEDIT=$ac_ct_NMEDIT
1.11523 ++ if test "x$ac_ct_NMEDIT" = x; then
1.11524 ++ NMEDIT=":"
1.11525 ++ else
1.11526 ++ case $cross_compiling:$ac_tool_warned in
1.11527 ++yes:)
1.11528 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.11529 ++whose name does not start with the host triplet. If you think this
1.11530 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.11531 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.11532 ++whose name does not start with the host triplet. If you think this
1.11533 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.11534 ++ac_tool_warned=yes ;;
1.11535 ++esac
1.11536 ++ NMEDIT=$ac_ct_NMEDIT
1.11537 ++ fi
1.11538 + else
1.11539 + NMEDIT="$ac_cv_prog_NMEDIT"
1.11540 + fi
1.11541 +@@ -6326,8 +7385,8 @@
1.11542 + if test -n "$ac_tool_prefix"; then
1.11543 + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
1.11544 + set dummy ${ac_tool_prefix}lipo; ac_word=$2
1.11545 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11546 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11547 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11548 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11549 + if test "${ac_cv_prog_LIPO+set}" = set; then
1.11550 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11551 + else
1.11552 +@@ -6340,32 +7399,34 @@
1.11553 + IFS=$as_save_IFS
1.11554 + test -z "$as_dir" && as_dir=.
1.11555 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11556 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11557 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11558 + ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
1.11559 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11560 + break 2
1.11561 + fi
1.11562 + done
1.11563 + done
1.11564 ++IFS=$as_save_IFS
1.11565 +
1.11566 + fi
1.11567 + fi
1.11568 + LIPO=$ac_cv_prog_LIPO
1.11569 + if test -n "$LIPO"; then
1.11570 +- echo "$as_me:$LINENO: result: $LIPO" >&5
1.11571 +-echo "${ECHO_T}$LIPO" >&6
1.11572 ++ { echo "$as_me:$LINENO: result: $LIPO" >&5
1.11573 ++echo "${ECHO_T}$LIPO" >&6; }
1.11574 + else
1.11575 +- echo "$as_me:$LINENO: result: no" >&5
1.11576 +-echo "${ECHO_T}no" >&6
1.11577 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11578 ++echo "${ECHO_T}no" >&6; }
1.11579 + fi
1.11580 +
1.11581 ++
1.11582 + fi
1.11583 + if test -z "$ac_cv_prog_LIPO"; then
1.11584 + ac_ct_LIPO=$LIPO
1.11585 + # Extract the first word of "lipo", so it can be a program name with args.
1.11586 + set dummy lipo; ac_word=$2
1.11587 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11588 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11589 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11590 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11591 + if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
1.11592 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11593 + else
1.11594 +@@ -6378,27 +7439,41 @@
1.11595 + IFS=$as_save_IFS
1.11596 + test -z "$as_dir" && as_dir=.
1.11597 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11598 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11599 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11600 + ac_cv_prog_ac_ct_LIPO="lipo"
1.11601 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11602 + break 2
1.11603 + fi
1.11604 + done
1.11605 + done
1.11606 ++IFS=$as_save_IFS
1.11607 +
1.11608 +- test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":"
1.11609 + fi
1.11610 + fi
1.11611 + ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
1.11612 + if test -n "$ac_ct_LIPO"; then
1.11613 +- echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
1.11614 +-echo "${ECHO_T}$ac_ct_LIPO" >&6
1.11615 ++ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
1.11616 ++echo "${ECHO_T}$ac_ct_LIPO" >&6; }
1.11617 + else
1.11618 +- echo "$as_me:$LINENO: result: no" >&5
1.11619 +-echo "${ECHO_T}no" >&6
1.11620 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11621 ++echo "${ECHO_T}no" >&6; }
1.11622 + fi
1.11623 +
1.11624 +- LIPO=$ac_ct_LIPO
1.11625 ++ if test "x$ac_ct_LIPO" = x; then
1.11626 ++ LIPO=":"
1.11627 ++ else
1.11628 ++ case $cross_compiling:$ac_tool_warned in
1.11629 ++yes:)
1.11630 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.11631 ++whose name does not start with the host triplet. If you think this
1.11632 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.11633 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.11634 ++whose name does not start with the host triplet. If you think this
1.11635 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.11636 ++ac_tool_warned=yes ;;
1.11637 ++esac
1.11638 ++ LIPO=$ac_ct_LIPO
1.11639 ++ fi
1.11640 + else
1.11641 + LIPO="$ac_cv_prog_LIPO"
1.11642 + fi
1.11643 +@@ -6406,8 +7481,8 @@
1.11644 + if test -n "$ac_tool_prefix"; then
1.11645 + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
1.11646 + set dummy ${ac_tool_prefix}otool; ac_word=$2
1.11647 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11648 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11649 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11650 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11651 + if test "${ac_cv_prog_OTOOL+set}" = set; then
1.11652 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11653 + else
1.11654 +@@ -6420,32 +7495,34 @@
1.11655 + IFS=$as_save_IFS
1.11656 + test -z "$as_dir" && as_dir=.
1.11657 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11658 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11659 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11660 + ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
1.11661 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11662 + break 2
1.11663 + fi
1.11664 + done
1.11665 + done
1.11666 ++IFS=$as_save_IFS
1.11667 +
1.11668 + fi
1.11669 + fi
1.11670 + OTOOL=$ac_cv_prog_OTOOL
1.11671 + if test -n "$OTOOL"; then
1.11672 +- echo "$as_me:$LINENO: result: $OTOOL" >&5
1.11673 +-echo "${ECHO_T}$OTOOL" >&6
1.11674 ++ { echo "$as_me:$LINENO: result: $OTOOL" >&5
1.11675 ++echo "${ECHO_T}$OTOOL" >&6; }
1.11676 + else
1.11677 +- echo "$as_me:$LINENO: result: no" >&5
1.11678 +-echo "${ECHO_T}no" >&6
1.11679 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11680 ++echo "${ECHO_T}no" >&6; }
1.11681 + fi
1.11682 +
1.11683 ++
1.11684 + fi
1.11685 + if test -z "$ac_cv_prog_OTOOL"; then
1.11686 + ac_ct_OTOOL=$OTOOL
1.11687 + # Extract the first word of "otool", so it can be a program name with args.
1.11688 + set dummy otool; ac_word=$2
1.11689 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11690 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11691 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11692 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11693 + if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
1.11694 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11695 + else
1.11696 +@@ -6458,27 +7535,41 @@
1.11697 + IFS=$as_save_IFS
1.11698 + test -z "$as_dir" && as_dir=.
1.11699 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11700 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11701 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11702 + ac_cv_prog_ac_ct_OTOOL="otool"
1.11703 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11704 + break 2
1.11705 + fi
1.11706 + done
1.11707 + done
1.11708 ++IFS=$as_save_IFS
1.11709 +
1.11710 +- test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":"
1.11711 + fi
1.11712 + fi
1.11713 + ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
1.11714 + if test -n "$ac_ct_OTOOL"; then
1.11715 +- echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
1.11716 +-echo "${ECHO_T}$ac_ct_OTOOL" >&6
1.11717 ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
1.11718 ++echo "${ECHO_T}$ac_ct_OTOOL" >&6; }
1.11719 + else
1.11720 +- echo "$as_me:$LINENO: result: no" >&5
1.11721 +-echo "${ECHO_T}no" >&6
1.11722 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11723 ++echo "${ECHO_T}no" >&6; }
1.11724 + fi
1.11725 +
1.11726 +- OTOOL=$ac_ct_OTOOL
1.11727 ++ if test "x$ac_ct_OTOOL" = x; then
1.11728 ++ OTOOL=":"
1.11729 ++ else
1.11730 ++ case $cross_compiling:$ac_tool_warned in
1.11731 ++yes:)
1.11732 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.11733 ++whose name does not start with the host triplet. If you think this
1.11734 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.11735 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.11736 ++whose name does not start with the host triplet. If you think this
1.11737 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.11738 ++ac_tool_warned=yes ;;
1.11739 ++esac
1.11740 ++ OTOOL=$ac_ct_OTOOL
1.11741 ++ fi
1.11742 + else
1.11743 + OTOOL="$ac_cv_prog_OTOOL"
1.11744 + fi
1.11745 +@@ -6486,8 +7577,8 @@
1.11746 + if test -n "$ac_tool_prefix"; then
1.11747 + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
1.11748 + set dummy ${ac_tool_prefix}otool64; ac_word=$2
1.11749 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11750 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11751 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11752 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11753 + if test "${ac_cv_prog_OTOOL64+set}" = set; then
1.11754 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11755 + else
1.11756 +@@ -6500,32 +7591,34 @@
1.11757 + IFS=$as_save_IFS
1.11758 + test -z "$as_dir" && as_dir=.
1.11759 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11760 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11761 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11762 + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
1.11763 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11764 + break 2
1.11765 + fi
1.11766 + done
1.11767 + done
1.11768 ++IFS=$as_save_IFS
1.11769 +
1.11770 + fi
1.11771 + fi
1.11772 + OTOOL64=$ac_cv_prog_OTOOL64
1.11773 + if test -n "$OTOOL64"; then
1.11774 +- echo "$as_me:$LINENO: result: $OTOOL64" >&5
1.11775 +-echo "${ECHO_T}$OTOOL64" >&6
1.11776 ++ { echo "$as_me:$LINENO: result: $OTOOL64" >&5
1.11777 ++echo "${ECHO_T}$OTOOL64" >&6; }
1.11778 + else
1.11779 +- echo "$as_me:$LINENO: result: no" >&5
1.11780 +-echo "${ECHO_T}no" >&6
1.11781 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11782 ++echo "${ECHO_T}no" >&6; }
1.11783 + fi
1.11784 +
1.11785 ++
1.11786 + fi
1.11787 + if test -z "$ac_cv_prog_OTOOL64"; then
1.11788 + ac_ct_OTOOL64=$OTOOL64
1.11789 + # Extract the first word of "otool64", so it can be a program name with args.
1.11790 + set dummy otool64; ac_word=$2
1.11791 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11792 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.11793 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.11794 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.11795 + if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
1.11796 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11797 + else
1.11798 +@@ -6538,27 +7631,41 @@
1.11799 + IFS=$as_save_IFS
1.11800 + test -z "$as_dir" && as_dir=.
1.11801 + for ac_exec_ext in '' $ac_executable_extensions; do
1.11802 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.11803 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.11804 + ac_cv_prog_ac_ct_OTOOL64="otool64"
1.11805 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.11806 + break 2
1.11807 + fi
1.11808 + done
1.11809 + done
1.11810 ++IFS=$as_save_IFS
1.11811 +
1.11812 +- test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":"
1.11813 + fi
1.11814 + fi
1.11815 + ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
1.11816 + if test -n "$ac_ct_OTOOL64"; then
1.11817 +- echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
1.11818 +-echo "${ECHO_T}$ac_ct_OTOOL64" >&6
1.11819 ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
1.11820 ++echo "${ECHO_T}$ac_ct_OTOOL64" >&6; }
1.11821 + else
1.11822 +- echo "$as_me:$LINENO: result: no" >&5
1.11823 +-echo "${ECHO_T}no" >&6
1.11824 ++ { echo "$as_me:$LINENO: result: no" >&5
1.11825 ++echo "${ECHO_T}no" >&6; }
1.11826 + fi
1.11827 +
1.11828 +- OTOOL64=$ac_ct_OTOOL64
1.11829 ++ if test "x$ac_ct_OTOOL64" = x; then
1.11830 ++ OTOOL64=":"
1.11831 ++ else
1.11832 ++ case $cross_compiling:$ac_tool_warned in
1.11833 ++yes:)
1.11834 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.11835 ++whose name does not start with the host triplet. If you think this
1.11836 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.11837 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.11838 ++whose name does not start with the host triplet. If you think this
1.11839 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.11840 ++ac_tool_warned=yes ;;
1.11841 ++esac
1.11842 ++ OTOOL64=$ac_ct_OTOOL64
1.11843 ++ fi
1.11844 + else
1.11845 + OTOOL64="$ac_cv_prog_OTOOL64"
1.11846 + fi
1.11847 +@@ -6589,8 +7696,8 @@
1.11848 +
1.11849 +
1.11850 +
1.11851 +- echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
1.11852 +-echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6
1.11853 ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
1.11854 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
1.11855 + if test "${lt_cv_apple_cc_single_mod+set}" = set; then
1.11856 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11857 + else
1.11858 +@@ -6616,10 +7723,10 @@
1.11859 + rm -f conftest.*
1.11860 + fi
1.11861 + fi
1.11862 +-echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
1.11863 +-echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6
1.11864 +- echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
1.11865 +-echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6
1.11866 ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
1.11867 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
1.11868 ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
1.11869 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
1.11870 + if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
1.11871 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.11872 + else
1.11873 +@@ -6643,41 +7750,38 @@
1.11874 + }
1.11875 + _ACEOF
1.11876 + rm -f conftest.$ac_objext conftest$ac_exeext
1.11877 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.11878 +- (eval $ac_link) 2>conftest.er1
1.11879 ++if { (ac_try="$ac_link"
1.11880 ++case "(($ac_try" in
1.11881 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.11882 ++ *) ac_try_echo=$ac_try;;
1.11883 ++esac
1.11884 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.11885 ++ (eval "$ac_link") 2>conftest.er1
1.11886 + ac_status=$?
1.11887 + grep -v '^ *+' conftest.er1 >conftest.err
1.11888 + rm -f conftest.er1
1.11889 + cat conftest.err >&5
1.11890 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.11891 +- (exit $ac_status); } &&
1.11892 +- { ac_try='test -z "$ac_c_werror_flag"
1.11893 +- || test ! -s conftest.err'
1.11894 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.11895 +- (eval $ac_try) 2>&5
1.11896 +- ac_status=$?
1.11897 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.11898 +- (exit $ac_status); }; } &&
1.11899 +- { ac_try='test -s conftest$ac_exeext'
1.11900 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.11901 +- (eval $ac_try) 2>&5
1.11902 +- ac_status=$?
1.11903 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.11904 +- (exit $ac_status); }; }; then
1.11905 ++ (exit $ac_status); } && {
1.11906 ++ test -z "$ac_c_werror_flag" ||
1.11907 ++ test ! -s conftest.err
1.11908 ++ } && test -s conftest$ac_exeext &&
1.11909 ++ $as_test_x conftest$ac_exeext; then
1.11910 + lt_cv_ld_exported_symbols_list=yes
1.11911 + else
1.11912 + echo "$as_me: failed program was:" >&5
1.11913 + sed 's/^/| /' conftest.$ac_ext >&5
1.11914 +
1.11915 +-lt_cv_ld_exported_symbols_list=no
1.11916 ++ lt_cv_ld_exported_symbols_list=no
1.11917 + fi
1.11918 +-rm -f conftest.err conftest.$ac_objext \
1.11919 ++
1.11920 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.11921 + conftest$ac_exeext conftest.$ac_ext
1.11922 + LDFLAGS="$save_LDFLAGS"
1.11923 +
1.11924 + fi
1.11925 +-echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
1.11926 +-echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6
1.11927 ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
1.11928 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
1.11929 + case $host_os in
1.11930 + rhapsody* | darwin1.[012])
1.11931 + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
1.11932 +@@ -6718,8 +7822,8 @@
1.11933 + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.11934 + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1.11935 + ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.11936 +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
1.11937 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
1.11938 ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
1.11939 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
1.11940 + # On Suns, sometimes $CPP names a directory.
1.11941 + if test -n "$CPP" && test -d "$CPP"; then
1.11942 + CPP=
1.11943 +@@ -6753,24 +7857,22 @@
1.11944 + #endif
1.11945 + Syntax error
1.11946 + _ACEOF
1.11947 +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
1.11948 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
1.11949 ++if { (ac_try="$ac_cpp conftest.$ac_ext"
1.11950 ++case "(($ac_try" in
1.11951 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.11952 ++ *) ac_try_echo=$ac_try;;
1.11953 ++esac
1.11954 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.11955 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
1.11956 + ac_status=$?
1.11957 + grep -v '^ *+' conftest.er1 >conftest.err
1.11958 + rm -f conftest.er1
1.11959 + cat conftest.err >&5
1.11960 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.11961 +- (exit $ac_status); } >/dev/null; then
1.11962 +- if test -s conftest.err; then
1.11963 +- ac_cpp_err=$ac_c_preproc_warn_flag
1.11964 +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
1.11965 +- else
1.11966 +- ac_cpp_err=
1.11967 +- fi
1.11968 +-else
1.11969 +- ac_cpp_err=yes
1.11970 +-fi
1.11971 +-if test -z "$ac_cpp_err"; then
1.11972 ++ (exit $ac_status); } >/dev/null && {
1.11973 ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
1.11974 ++ test ! -s conftest.err
1.11975 ++ }; then
1.11976 + :
1.11977 + else
1.11978 + echo "$as_me: failed program was:" >&5
1.11979 +@@ -6779,9 +7881,10 @@
1.11980 + # Broken: fails on valid input.
1.11981 + continue
1.11982 + fi
1.11983 ++
1.11984 + rm -f conftest.err conftest.$ac_ext
1.11985 +
1.11986 +- # OK, works on sane cases. Now check whether non-existent headers
1.11987 ++ # OK, works on sane cases. Now check whether nonexistent headers
1.11988 + # can be detected and how.
1.11989 + cat >conftest.$ac_ext <<_ACEOF
1.11990 + /* confdefs.h. */
1.11991 +@@ -6791,24 +7894,22 @@
1.11992 + /* end confdefs.h. */
1.11993 + #include <ac_nonexistent.h>
1.11994 + _ACEOF
1.11995 +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
1.11996 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
1.11997 ++if { (ac_try="$ac_cpp conftest.$ac_ext"
1.11998 ++case "(($ac_try" in
1.11999 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12000 ++ *) ac_try_echo=$ac_try;;
1.12001 ++esac
1.12002 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12003 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
1.12004 + ac_status=$?
1.12005 + grep -v '^ *+' conftest.er1 >conftest.err
1.12006 + rm -f conftest.er1
1.12007 + cat conftest.err >&5
1.12008 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12009 +- (exit $ac_status); } >/dev/null; then
1.12010 +- if test -s conftest.err; then
1.12011 +- ac_cpp_err=$ac_c_preproc_warn_flag
1.12012 +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
1.12013 +- else
1.12014 +- ac_cpp_err=
1.12015 +- fi
1.12016 +-else
1.12017 +- ac_cpp_err=yes
1.12018 +-fi
1.12019 +-if test -z "$ac_cpp_err"; then
1.12020 ++ (exit $ac_status); } >/dev/null && {
1.12021 ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
1.12022 ++ test ! -s conftest.err
1.12023 ++ }; then
1.12024 + # Broken: success on invalid input.
1.12025 + continue
1.12026 + else
1.12027 +@@ -6819,6 +7920,7 @@
1.12028 + ac_preproc_ok=:
1.12029 + break
1.12030 + fi
1.12031 ++
1.12032 + rm -f conftest.err conftest.$ac_ext
1.12033 +
1.12034 + done
1.12035 +@@ -6836,8 +7938,8 @@
1.12036 + else
1.12037 + ac_cv_prog_CPP=$CPP
1.12038 + fi
1.12039 +-echo "$as_me:$LINENO: result: $CPP" >&5
1.12040 +-echo "${ECHO_T}$CPP" >&6
1.12041 ++{ echo "$as_me:$LINENO: result: $CPP" >&5
1.12042 ++echo "${ECHO_T}$CPP" >&6; }
1.12043 + ac_preproc_ok=false
1.12044 + for ac_c_preproc_warn_flag in '' yes
1.12045 + do
1.12046 +@@ -6860,24 +7962,22 @@
1.12047 + #endif
1.12048 + Syntax error
1.12049 + _ACEOF
1.12050 +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
1.12051 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
1.12052 ++if { (ac_try="$ac_cpp conftest.$ac_ext"
1.12053 ++case "(($ac_try" in
1.12054 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12055 ++ *) ac_try_echo=$ac_try;;
1.12056 ++esac
1.12057 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12058 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
1.12059 + ac_status=$?
1.12060 + grep -v '^ *+' conftest.er1 >conftest.err
1.12061 + rm -f conftest.er1
1.12062 + cat conftest.err >&5
1.12063 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12064 +- (exit $ac_status); } >/dev/null; then
1.12065 +- if test -s conftest.err; then
1.12066 +- ac_cpp_err=$ac_c_preproc_warn_flag
1.12067 +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
1.12068 +- else
1.12069 +- ac_cpp_err=
1.12070 +- fi
1.12071 +-else
1.12072 +- ac_cpp_err=yes
1.12073 +-fi
1.12074 +-if test -z "$ac_cpp_err"; then
1.12075 ++ (exit $ac_status); } >/dev/null && {
1.12076 ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
1.12077 ++ test ! -s conftest.err
1.12078 ++ }; then
1.12079 + :
1.12080 + else
1.12081 + echo "$as_me: failed program was:" >&5
1.12082 +@@ -6886,9 +7986,10 @@
1.12083 + # Broken: fails on valid input.
1.12084 + continue
1.12085 + fi
1.12086 ++
1.12087 + rm -f conftest.err conftest.$ac_ext
1.12088 +
1.12089 +- # OK, works on sane cases. Now check whether non-existent headers
1.12090 ++ # OK, works on sane cases. Now check whether nonexistent headers
1.12091 + # can be detected and how.
1.12092 + cat >conftest.$ac_ext <<_ACEOF
1.12093 + /* confdefs.h. */
1.12094 +@@ -6898,24 +7999,22 @@
1.12095 + /* end confdefs.h. */
1.12096 + #include <ac_nonexistent.h>
1.12097 + _ACEOF
1.12098 +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
1.12099 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
1.12100 ++if { (ac_try="$ac_cpp conftest.$ac_ext"
1.12101 ++case "(($ac_try" in
1.12102 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12103 ++ *) ac_try_echo=$ac_try;;
1.12104 ++esac
1.12105 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12106 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
1.12107 + ac_status=$?
1.12108 + grep -v '^ *+' conftest.er1 >conftest.err
1.12109 + rm -f conftest.er1
1.12110 + cat conftest.err >&5
1.12111 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12112 +- (exit $ac_status); } >/dev/null; then
1.12113 +- if test -s conftest.err; then
1.12114 +- ac_cpp_err=$ac_c_preproc_warn_flag
1.12115 +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
1.12116 +- else
1.12117 +- ac_cpp_err=
1.12118 +- fi
1.12119 +-else
1.12120 +- ac_cpp_err=yes
1.12121 +-fi
1.12122 +-if test -z "$ac_cpp_err"; then
1.12123 ++ (exit $ac_status); } >/dev/null && {
1.12124 ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
1.12125 ++ test ! -s conftest.err
1.12126 ++ }; then
1.12127 + # Broken: success on invalid input.
1.12128 + continue
1.12129 + else
1.12130 +@@ -6926,6 +8025,7 @@
1.12131 + ac_preproc_ok=:
1.12132 + break
1.12133 + fi
1.12134 ++
1.12135 + rm -f conftest.err conftest.$ac_ext
1.12136 +
1.12137 + done
1.12138 +@@ -6948,8 +8048,8 @@
1.12139 + ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.12140 +
1.12141 +
1.12142 +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
1.12143 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
1.12144 ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
1.12145 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
1.12146 + if test "${ac_cv_header_stdc+set}" = set; then
1.12147 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12148 + else
1.12149 +@@ -6973,35 +8073,31 @@
1.12150 + }
1.12151 + _ACEOF
1.12152 + rm -f conftest.$ac_objext
1.12153 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.12154 +- (eval $ac_compile) 2>conftest.er1
1.12155 ++if { (ac_try="$ac_compile"
1.12156 ++case "(($ac_try" in
1.12157 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12158 ++ *) ac_try_echo=$ac_try;;
1.12159 ++esac
1.12160 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12161 ++ (eval "$ac_compile") 2>conftest.er1
1.12162 + ac_status=$?
1.12163 + grep -v '^ *+' conftest.er1 >conftest.err
1.12164 + rm -f conftest.er1
1.12165 + cat conftest.err >&5
1.12166 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12167 +- (exit $ac_status); } &&
1.12168 +- { ac_try='test -z "$ac_c_werror_flag"
1.12169 +- || test ! -s conftest.err'
1.12170 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12171 +- (eval $ac_try) 2>&5
1.12172 +- ac_status=$?
1.12173 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12174 +- (exit $ac_status); }; } &&
1.12175 +- { ac_try='test -s conftest.$ac_objext'
1.12176 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12177 +- (eval $ac_try) 2>&5
1.12178 +- ac_status=$?
1.12179 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12180 +- (exit $ac_status); }; }; then
1.12181 ++ (exit $ac_status); } && {
1.12182 ++ test -z "$ac_c_werror_flag" ||
1.12183 ++ test ! -s conftest.err
1.12184 ++ } && test -s conftest.$ac_objext; then
1.12185 + ac_cv_header_stdc=yes
1.12186 + else
1.12187 + echo "$as_me: failed program was:" >&5
1.12188 + sed 's/^/| /' conftest.$ac_ext >&5
1.12189 +
1.12190 +-ac_cv_header_stdc=no
1.12191 ++ ac_cv_header_stdc=no
1.12192 + fi
1.12193 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.12194 ++
1.12195 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.12196 +
1.12197 + if test $ac_cv_header_stdc = yes; then
1.12198 + # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
1.12199 +@@ -7057,6 +8153,7 @@
1.12200 + cat >>conftest.$ac_ext <<_ACEOF
1.12201 + /* end confdefs.h. */
1.12202 + #include <ctype.h>
1.12203 ++#include <stdlib.h>
1.12204 + #if ((' ' & 0x0FF) == 0x020)
1.12205 + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
1.12206 + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
1.12207 +@@ -7076,18 +8173,27 @@
1.12208 + for (i = 0; i < 256; i++)
1.12209 + if (XOR (islower (i), ISLOWER (i))
1.12210 + || toupper (i) != TOUPPER (i))
1.12211 +- exit(2);
1.12212 +- exit (0);
1.12213 ++ return 2;
1.12214 ++ return 0;
1.12215 + }
1.12216 + _ACEOF
1.12217 + rm -f conftest$ac_exeext
1.12218 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.12219 +- (eval $ac_link) 2>&5
1.12220 ++if { (ac_try="$ac_link"
1.12221 ++case "(($ac_try" in
1.12222 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12223 ++ *) ac_try_echo=$ac_try;;
1.12224 ++esac
1.12225 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12226 ++ (eval "$ac_link") 2>&5
1.12227 + ac_status=$?
1.12228 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12229 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
1.12230 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12231 +- (eval $ac_try) 2>&5
1.12232 ++ { (case "(($ac_try" in
1.12233 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12234 ++ *) ac_try_echo=$ac_try;;
1.12235 ++esac
1.12236 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12237 ++ (eval "$ac_try") 2>&5
1.12238 + ac_status=$?
1.12239 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12240 + (exit $ac_status); }; }; then
1.12241 +@@ -7100,12 +8206,14 @@
1.12242 + ( exit $ac_status )
1.12243 + ac_cv_header_stdc=no
1.12244 + fi
1.12245 +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
1.12246 ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
1.12247 + fi
1.12248 ++
1.12249 ++
1.12250 + fi
1.12251 + fi
1.12252 +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
1.12253 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6
1.12254 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
1.12255 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
1.12256 + if test $ac_cv_header_stdc = yes; then
1.12257 +
1.12258 + cat >>confdefs.h <<\_ACEOF
1.12259 +@@ -7128,9 +8236,9 @@
1.12260 + inttypes.h stdint.h unistd.h
1.12261 + do
1.12262 + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
1.12263 +-echo "$as_me:$LINENO: checking for $ac_header" >&5
1.12264 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
1.12265 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then
1.12266 ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5
1.12267 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
1.12268 ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
1.12269 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12270 + else
1.12271 + cat >conftest.$ac_ext <<_ACEOF
1.12272 +@@ -7144,38 +8252,35 @@
1.12273 + #include <$ac_header>
1.12274 + _ACEOF
1.12275 + rm -f conftest.$ac_objext
1.12276 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.12277 +- (eval $ac_compile) 2>conftest.er1
1.12278 ++if { (ac_try="$ac_compile"
1.12279 ++case "(($ac_try" in
1.12280 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12281 ++ *) ac_try_echo=$ac_try;;
1.12282 ++esac
1.12283 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12284 ++ (eval "$ac_compile") 2>conftest.er1
1.12285 + ac_status=$?
1.12286 + grep -v '^ *+' conftest.er1 >conftest.err
1.12287 + rm -f conftest.er1
1.12288 + cat conftest.err >&5
1.12289 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12290 +- (exit $ac_status); } &&
1.12291 +- { ac_try='test -z "$ac_c_werror_flag"
1.12292 +- || test ! -s conftest.err'
1.12293 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12294 +- (eval $ac_try) 2>&5
1.12295 +- ac_status=$?
1.12296 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12297 +- (exit $ac_status); }; } &&
1.12298 +- { ac_try='test -s conftest.$ac_objext'
1.12299 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12300 +- (eval $ac_try) 2>&5
1.12301 +- ac_status=$?
1.12302 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12303 +- (exit $ac_status); }; }; then
1.12304 ++ (exit $ac_status); } && {
1.12305 ++ test -z "$ac_c_werror_flag" ||
1.12306 ++ test ! -s conftest.err
1.12307 ++ } && test -s conftest.$ac_objext; then
1.12308 + eval "$as_ac_Header=yes"
1.12309 + else
1.12310 + echo "$as_me: failed program was:" >&5
1.12311 + sed 's/^/| /' conftest.$ac_ext >&5
1.12312 +
1.12313 +-eval "$as_ac_Header=no"
1.12314 ++ eval "$as_ac_Header=no"
1.12315 + fi
1.12316 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.12317 ++
1.12318 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.12319 + fi
1.12320 +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
1.12321 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
1.12322 ++ac_res=`eval echo '${'$as_ac_Header'}'`
1.12323 ++ { echo "$as_me:$LINENO: result: $ac_res" >&5
1.12324 ++echo "${ECHO_T}$ac_res" >&6; }
1.12325 + if test `eval echo '${'$as_ac_Header'}'` = yes; then
1.12326 + cat >>confdefs.h <<_ACEOF
1.12327 + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
1.12328 +@@ -7190,9 +8295,9 @@
1.12329 + for ac_header in dlfcn.h
1.12330 + do
1.12331 + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
1.12332 +-echo "$as_me:$LINENO: checking for $ac_header" >&5
1.12333 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
1.12334 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then
1.12335 ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5
1.12336 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
1.12337 ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
1.12338 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12339 + else
1.12340 + cat >conftest.$ac_ext <<_ACEOF
1.12341 +@@ -7206,38 +8311,35 @@
1.12342 + #include <$ac_header>
1.12343 + _ACEOF
1.12344 + rm -f conftest.$ac_objext
1.12345 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.12346 +- (eval $ac_compile) 2>conftest.er1
1.12347 ++if { (ac_try="$ac_compile"
1.12348 ++case "(($ac_try" in
1.12349 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12350 ++ *) ac_try_echo=$ac_try;;
1.12351 ++esac
1.12352 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12353 ++ (eval "$ac_compile") 2>conftest.er1
1.12354 + ac_status=$?
1.12355 + grep -v '^ *+' conftest.er1 >conftest.err
1.12356 + rm -f conftest.er1
1.12357 + cat conftest.err >&5
1.12358 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12359 +- (exit $ac_status); } &&
1.12360 +- { ac_try='test -z "$ac_c_werror_flag"
1.12361 +- || test ! -s conftest.err'
1.12362 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12363 +- (eval $ac_try) 2>&5
1.12364 +- ac_status=$?
1.12365 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12366 +- (exit $ac_status); }; } &&
1.12367 +- { ac_try='test -s conftest.$ac_objext'
1.12368 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12369 +- (eval $ac_try) 2>&5
1.12370 +- ac_status=$?
1.12371 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12372 +- (exit $ac_status); }; }; then
1.12373 ++ (exit $ac_status); } && {
1.12374 ++ test -z "$ac_c_werror_flag" ||
1.12375 ++ test ! -s conftest.err
1.12376 ++ } && test -s conftest.$ac_objext; then
1.12377 + eval "$as_ac_Header=yes"
1.12378 + else
1.12379 + echo "$as_me: failed program was:" >&5
1.12380 + sed 's/^/| /' conftest.$ac_ext >&5
1.12381 +
1.12382 +-eval "$as_ac_Header=no"
1.12383 ++ eval "$as_ac_Header=no"
1.12384 + fi
1.12385 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.12386 ++
1.12387 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.12388 + fi
1.12389 +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
1.12390 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
1.12391 ++ac_res=`eval echo '${'$as_ac_Header'}'`
1.12392 ++ { echo "$as_me:$LINENO: result: $ac_res" >&5
1.12393 ++echo "${ECHO_T}$ac_res" >&6; }
1.12394 + if test `eval echo '${'$as_ac_Header'}'` = yes; then
1.12395 + cat >>confdefs.h <<_ACEOF
1.12396 + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
1.12397 +@@ -7257,10 +8359,9 @@
1.12398 +
1.12399 +
1.12400 +
1.12401 +- # Check whether --enable-shared or --disable-shared was given.
1.12402 ++ # Check whether --enable-shared was given.
1.12403 + if test "${enable_shared+set}" = set; then
1.12404 +- enableval="$enable_shared"
1.12405 +- p=${PACKAGE-default}
1.12406 ++ enableval=$enable_shared; p=${PACKAGE-default}
1.12407 + case $enableval in
1.12408 + yes) enable_shared=yes ;;
1.12409 + no) enable_shared=no ;;
1.12410 +@@ -7279,7 +8380,8 @@
1.12411 + esac
1.12412 + else
1.12413 + enable_shared=yes
1.12414 +-fi;
1.12415 ++fi
1.12416 ++
1.12417 +
1.12418 +
1.12419 +
1.12420 +@@ -7288,10 +8390,9 @@
1.12421 +
1.12422 +
1.12423 +
1.12424 +- # Check whether --enable-static or --disable-static was given.
1.12425 ++ # Check whether --enable-static was given.
1.12426 + if test "${enable_static+set}" = set; then
1.12427 +- enableval="$enable_static"
1.12428 +- p=${PACKAGE-default}
1.12429 ++ enableval=$enable_static; p=${PACKAGE-default}
1.12430 + case $enableval in
1.12431 + yes) enable_static=yes ;;
1.12432 + no) enable_static=no ;;
1.12433 +@@ -7310,7 +8411,8 @@
1.12434 + esac
1.12435 + else
1.12436 + enable_static=yes
1.12437 +-fi;
1.12438 ++fi
1.12439 ++
1.12440 +
1.12441 +
1.12442 +
1.12443 +@@ -7320,13 +8422,13 @@
1.12444 +
1.12445 +
1.12446 +
1.12447 +-# Check whether --with-pic or --without-pic was given.
1.12448 ++# Check whether --with-pic was given.
1.12449 + if test "${with_pic+set}" = set; then
1.12450 +- withval="$with_pic"
1.12451 +- pic_mode="$withval"
1.12452 ++ withval=$with_pic; pic_mode="$withval"
1.12453 + else
1.12454 + pic_mode=default
1.12455 +-fi;
1.12456 ++fi
1.12457 ++
1.12458 +
1.12459 + test -z "$pic_mode" && pic_mode=default
1.12460 +
1.12461 +@@ -7336,10 +8438,9 @@
1.12462 +
1.12463 +
1.12464 +
1.12465 +- # Check whether --enable-fast-install or --disable-fast-install was given.
1.12466 ++ # Check whether --enable-fast-install was given.
1.12467 + if test "${enable_fast_install+set}" = set; then
1.12468 +- enableval="$enable_fast_install"
1.12469 +- p=${PACKAGE-default}
1.12470 ++ enableval=$enable_fast_install; p=${PACKAGE-default}
1.12471 + case $enableval in
1.12472 + yes) enable_fast_install=yes ;;
1.12473 + no) enable_fast_install=no ;;
1.12474 +@@ -7358,7 +8459,8 @@
1.12475 + esac
1.12476 + else
1.12477 + enable_fast_install=yes
1.12478 +-fi;
1.12479 ++fi
1.12480 ++
1.12481 +
1.12482 +
1.12483 +
1.12484 +@@ -7418,8 +8520,8 @@
1.12485 + setopt NO_GLOB_SUBST
1.12486 + fi
1.12487 +
1.12488 +-echo "$as_me:$LINENO: checking for objdir" >&5
1.12489 +-echo $ECHO_N "checking for objdir... $ECHO_C" >&6
1.12490 ++{ echo "$as_me:$LINENO: checking for objdir" >&5
1.12491 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
1.12492 + if test "${lt_cv_objdir+set}" = set; then
1.12493 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12494 + else
1.12495 +@@ -7433,8 +8535,8 @@
1.12496 + fi
1.12497 + rmdir .libs 2>/dev/null
1.12498 + fi
1.12499 +-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
1.12500 +-echo "${ECHO_T}$lt_cv_objdir" >&6
1.12501 ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
1.12502 ++echo "${ECHO_T}$lt_cv_objdir" >&6; }
1.12503 + objdir=$lt_cv_objdir
1.12504 +
1.12505 +
1.12506 +@@ -7526,8 +8628,8 @@
1.12507 + case $deplibs_check_method in
1.12508 + file_magic*)
1.12509 + if test "$file_magic_cmd" = '$MAGIC_CMD'; then
1.12510 +- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
1.12511 +-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
1.12512 ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
1.12513 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
1.12514 + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
1.12515 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12516 + else
1.12517 +@@ -7579,11 +8681,11 @@
1.12518 +
1.12519 + MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
1.12520 + if test -n "$MAGIC_CMD"; then
1.12521 +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
1.12522 +-echo "${ECHO_T}$MAGIC_CMD" >&6
1.12523 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
1.12524 ++echo "${ECHO_T}$MAGIC_CMD" >&6; }
1.12525 + else
1.12526 +- echo "$as_me:$LINENO: result: no" >&5
1.12527 +-echo "${ECHO_T}no" >&6
1.12528 ++ { echo "$as_me:$LINENO: result: no" >&5
1.12529 ++echo "${ECHO_T}no" >&6; }
1.12530 + fi
1.12531 +
1.12532 +
1.12533 +@@ -7592,8 +8694,8 @@
1.12534 +
1.12535 + if test -z "$lt_cv_path_MAGIC_CMD"; then
1.12536 + if test -n "$ac_tool_prefix"; then
1.12537 +- echo "$as_me:$LINENO: checking for file" >&5
1.12538 +-echo $ECHO_N "checking for file... $ECHO_C" >&6
1.12539 ++ { echo "$as_me:$LINENO: checking for file" >&5
1.12540 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; }
1.12541 + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
1.12542 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12543 + else
1.12544 +@@ -7645,11 +8747,11 @@
1.12545 +
1.12546 + MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
1.12547 + if test -n "$MAGIC_CMD"; then
1.12548 +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
1.12549 +-echo "${ECHO_T}$MAGIC_CMD" >&6
1.12550 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
1.12551 ++echo "${ECHO_T}$MAGIC_CMD" >&6; }
1.12552 + else
1.12553 +- echo "$as_me:$LINENO: result: no" >&5
1.12554 +-echo "${ECHO_T}no" >&6
1.12555 ++ { echo "$as_me:$LINENO: result: no" >&5
1.12556 ++echo "${ECHO_T}no" >&6; }
1.12557 + fi
1.12558 +
1.12559 +
1.12560 +@@ -7729,8 +8831,8 @@
1.12561 + if test "$GCC" = yes; then
1.12562 + lt_prog_compiler_no_builtin_flag=' -fno-builtin'
1.12563 +
1.12564 +- echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
1.12565 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
1.12566 ++ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
1.12567 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
1.12568 + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
1.12569 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12570 + else
1.12571 +@@ -7747,11 +8849,11 @@
1.12572 + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
1.12573 + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
1.12574 + -e 's:$: $lt_compiler_flag:'`
1.12575 +- (eval echo "\"\$as_me:7750: $lt_compile\"" >&5)
1.12576 ++ (eval echo "\"\$as_me:8852: $lt_compile\"" >&5)
1.12577 + (eval "$lt_compile" 2>conftest.err)
1.12578 + ac_status=$?
1.12579 + cat conftest.err >&5
1.12580 +- echo "$as_me:7754: \$? = $ac_status" >&5
1.12581 ++ echo "$as_me:8856: \$? = $ac_status" >&5
1.12582 + if (exit $ac_status) && test -s "$ac_outfile"; then
1.12583 + # The compiler can only warn and ignore the option if not recognized
1.12584 + # So say no if there are warnings other than the usual output.
1.12585 +@@ -7764,8 +8866,8 @@
1.12586 + $RM conftest*
1.12587 +
1.12588 + fi
1.12589 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
1.12590 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
1.12591 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
1.12592 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
1.12593 +
1.12594 + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
1.12595 + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
1.12596 +@@ -7784,8 +8886,8 @@
1.12597 + lt_prog_compiler_pic=
1.12598 + lt_prog_compiler_static=
1.12599 +
1.12600 +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
1.12601 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
1.12602 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
1.12603 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
1.12604 +
1.12605 + if test "$GCC" = yes; then
1.12606 + lt_prog_compiler_wl='-Wl,'
1.12607 +@@ -8056,8 +9158,8 @@
1.12608 + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
1.12609 + ;;
1.12610 + esac
1.12611 +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
1.12612 +-echo "${ECHO_T}$lt_prog_compiler_pic" >&6
1.12613 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
1.12614 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
1.12615 +
1.12616 +
1.12617 +
1.12618 +@@ -8068,8 +9170,8 @@
1.12619 + # Check to make sure the PIC flag actually works.
1.12620 + #
1.12621 + if test -n "$lt_prog_compiler_pic"; then
1.12622 +- echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
1.12623 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
1.12624 ++ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
1.12625 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
1.12626 + if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
1.12627 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12628 + else
1.12629 +@@ -8086,11 +9188,11 @@
1.12630 + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
1.12631 + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
1.12632 + -e 's:$: $lt_compiler_flag:'`
1.12633 +- (eval echo "\"\$as_me:8089: $lt_compile\"" >&5)
1.12634 ++ (eval echo "\"\$as_me:9191: $lt_compile\"" >&5)
1.12635 + (eval "$lt_compile" 2>conftest.err)
1.12636 + ac_status=$?
1.12637 + cat conftest.err >&5
1.12638 +- echo "$as_me:8093: \$? = $ac_status" >&5
1.12639 ++ echo "$as_me:9195: \$? = $ac_status" >&5
1.12640 + if (exit $ac_status) && test -s "$ac_outfile"; then
1.12641 + # The compiler can only warn and ignore the option if not recognized
1.12642 + # So say no if there are warnings other than the usual output.
1.12643 +@@ -8103,8 +9205,8 @@
1.12644 + $RM conftest*
1.12645 +
1.12646 + fi
1.12647 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
1.12648 +-echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6
1.12649 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
1.12650 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
1.12651 +
1.12652 + if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
1.12653 + case $lt_prog_compiler_pic in
1.12654 +@@ -8127,8 +9229,8 @@
1.12655 + # Check to make sure the static flag actually works.
1.12656 + #
1.12657 + wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
1.12658 +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
1.12659 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
1.12660 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
1.12661 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
1.12662 + if test "${lt_cv_prog_compiler_static_works+set}" = set; then
1.12663 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12664 + else
1.12665 +@@ -8155,8 +9257,8 @@
1.12666 + LDFLAGS="$save_LDFLAGS"
1.12667 +
1.12668 + fi
1.12669 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
1.12670 +-echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6
1.12671 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
1.12672 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
1.12673 +
1.12674 + if test x"$lt_cv_prog_compiler_static_works" = xyes; then
1.12675 + :
1.12676 +@@ -8170,8 +9272,8 @@
1.12677 +
1.12678 +
1.12679 +
1.12680 +- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
1.12681 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
1.12682 ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
1.12683 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
1.12684 + if test "${lt_cv_prog_compiler_c_o+set}" = set; then
1.12685 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12686 + else
1.12687 +@@ -8191,11 +9293,11 @@
1.12688 + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
1.12689 + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
1.12690 + -e 's:$: $lt_compiler_flag:'`
1.12691 +- (eval echo "\"\$as_me:8194: $lt_compile\"" >&5)
1.12692 ++ (eval echo "\"\$as_me:9296: $lt_compile\"" >&5)
1.12693 + (eval "$lt_compile" 2>out/conftest.err)
1.12694 + ac_status=$?
1.12695 + cat out/conftest.err >&5
1.12696 +- echo "$as_me:8198: \$? = $ac_status" >&5
1.12697 ++ echo "$as_me:9300: \$? = $ac_status" >&5
1.12698 + if (exit $ac_status) && test -s out/conftest2.$ac_objext
1.12699 + then
1.12700 + # The compiler can only warn and ignore the option if not recognized
1.12701 +@@ -8217,16 +9319,16 @@
1.12702 + $RM conftest*
1.12703 +
1.12704 + fi
1.12705 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
1.12706 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
1.12707 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
1.12708 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
1.12709 +
1.12710 +
1.12711 +
1.12712 +
1.12713 +
1.12714 +
1.12715 +- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
1.12716 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
1.12717 ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
1.12718 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
1.12719 + if test "${lt_cv_prog_compiler_c_o+set}" = set; then
1.12720 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.12721 + else
1.12722 +@@ -8246,11 +9348,11 @@
1.12723 + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
1.12724 + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
1.12725 + -e 's:$: $lt_compiler_flag:'`
1.12726 +- (eval echo "\"\$as_me:8249: $lt_compile\"" >&5)
1.12727 ++ (eval echo "\"\$as_me:9351: $lt_compile\"" >&5)
1.12728 + (eval "$lt_compile" 2>out/conftest.err)
1.12729 + ac_status=$?
1.12730 + cat out/conftest.err >&5
1.12731 +- echo "$as_me:8253: \$? = $ac_status" >&5
1.12732 ++ echo "$as_me:9355: \$? = $ac_status" >&5
1.12733 + if (exit $ac_status) && test -s out/conftest2.$ac_objext
1.12734 + then
1.12735 + # The compiler can only warn and ignore the option if not recognized
1.12736 +@@ -8272,8 +9374,8 @@
1.12737 + $RM conftest*
1.12738 +
1.12739 + fi
1.12740 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
1.12741 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
1.12742 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
1.12743 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
1.12744 +
1.12745 +
1.12746 +
1.12747 +@@ -8281,16 +9383,16 @@
1.12748 + hard_links="nottested"
1.12749 + if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
1.12750 + # do not overwrite the value of need_locks provided by the user
1.12751 +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
1.12752 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
1.12753 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
1.12754 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
1.12755 + hard_links=yes
1.12756 + $RM conftest*
1.12757 + ln conftest.a conftest.b 2>/dev/null && hard_links=no
1.12758 + touch conftest.a
1.12759 + ln conftest.a conftest.b 2>&5 || hard_links=no
1.12760 + ln conftest.a conftest.b 2>/dev/null && hard_links=no
1.12761 +- echo "$as_me:$LINENO: result: $hard_links" >&5
1.12762 +-echo "${ECHO_T}$hard_links" >&6
1.12763 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5
1.12764 ++echo "${ECHO_T}$hard_links" >&6; }
1.12765 + if test "$hard_links" = no; then
1.12766 + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
1.12767 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
1.12768 +@@ -8305,8 +9407,8 @@
1.12769 +
1.12770 +
1.12771 +
1.12772 +- echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
1.12773 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
1.12774 ++ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
1.12775 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
1.12776 +
1.12777 + runpath_var=
1.12778 + allow_undefined_flag=
1.12779 +@@ -8763,27 +9865,23 @@
1.12780 + }
1.12781 + _ACEOF
1.12782 + rm -f conftest.$ac_objext conftest$ac_exeext
1.12783 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.12784 +- (eval $ac_link) 2>conftest.er1
1.12785 ++if { (ac_try="$ac_link"
1.12786 ++case "(($ac_try" in
1.12787 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12788 ++ *) ac_try_echo=$ac_try;;
1.12789 ++esac
1.12790 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12791 ++ (eval "$ac_link") 2>conftest.er1
1.12792 + ac_status=$?
1.12793 + grep -v '^ *+' conftest.er1 >conftest.err
1.12794 + rm -f conftest.er1
1.12795 + cat conftest.err >&5
1.12796 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12797 +- (exit $ac_status); } &&
1.12798 +- { ac_try='test -z "$ac_c_werror_flag"
1.12799 +- || test ! -s conftest.err'
1.12800 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12801 +- (eval $ac_try) 2>&5
1.12802 +- ac_status=$?
1.12803 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12804 +- (exit $ac_status); }; } &&
1.12805 +- { ac_try='test -s conftest$ac_exeext'
1.12806 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12807 +- (eval $ac_try) 2>&5
1.12808 +- ac_status=$?
1.12809 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12810 +- (exit $ac_status); }; }; then
1.12811 ++ (exit $ac_status); } && {
1.12812 ++ test -z "$ac_c_werror_flag" ||
1.12813 ++ test ! -s conftest.err
1.12814 ++ } && test -s conftest$ac_exeext &&
1.12815 ++ $as_test_x conftest$ac_exeext; then
1.12816 +
1.12817 + lt_aix_libpath_sed='
1.12818 + /Import File Strings/,/^$/ {
1.12819 +@@ -8801,8 +9899,10 @@
1.12820 + echo "$as_me: failed program was:" >&5
1.12821 + sed 's/^/| /' conftest.$ac_ext >&5
1.12822 +
1.12823 ++
1.12824 + fi
1.12825 +-rm -f conftest.err conftest.$ac_objext \
1.12826 ++
1.12827 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.12828 + conftest$ac_exeext conftest.$ac_ext
1.12829 + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
1.12830 +
1.12831 +@@ -8832,27 +9932,23 @@
1.12832 + }
1.12833 + _ACEOF
1.12834 + rm -f conftest.$ac_objext conftest$ac_exeext
1.12835 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.12836 +- (eval $ac_link) 2>conftest.er1
1.12837 ++if { (ac_try="$ac_link"
1.12838 ++case "(($ac_try" in
1.12839 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12840 ++ *) ac_try_echo=$ac_try;;
1.12841 ++esac
1.12842 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12843 ++ (eval "$ac_link") 2>conftest.er1
1.12844 + ac_status=$?
1.12845 + grep -v '^ *+' conftest.er1 >conftest.err
1.12846 + rm -f conftest.er1
1.12847 + cat conftest.err >&5
1.12848 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12849 +- (exit $ac_status); } &&
1.12850 +- { ac_try='test -z "$ac_c_werror_flag"
1.12851 +- || test ! -s conftest.err'
1.12852 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12853 +- (eval $ac_try) 2>&5
1.12854 +- ac_status=$?
1.12855 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12856 +- (exit $ac_status); }; } &&
1.12857 +- { ac_try='test -s conftest$ac_exeext'
1.12858 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12859 +- (eval $ac_try) 2>&5
1.12860 +- ac_status=$?
1.12861 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12862 +- (exit $ac_status); }; }; then
1.12863 ++ (exit $ac_status); } && {
1.12864 ++ test -z "$ac_c_werror_flag" ||
1.12865 ++ test ! -s conftest.err
1.12866 ++ } && test -s conftest$ac_exeext &&
1.12867 ++ $as_test_x conftest$ac_exeext; then
1.12868 +
1.12869 + lt_aix_libpath_sed='
1.12870 + /Import File Strings/,/^$/ {
1.12871 +@@ -8870,8 +9966,10 @@
1.12872 + echo "$as_me: failed program was:" >&5
1.12873 + sed 's/^/| /' conftest.$ac_ext >&5
1.12874 +
1.12875 ++
1.12876 + fi
1.12877 +-rm -f conftest.err conftest.$ac_objext \
1.12878 ++
1.12879 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.12880 + conftest$ac_exeext conftest.$ac_ext
1.12881 + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
1.12882 +
1.12883 +@@ -9088,35 +10186,33 @@
1.12884 + int foo(void) {}
1.12885 + _ACEOF
1.12886 + rm -f conftest.$ac_objext conftest$ac_exeext
1.12887 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.12888 +- (eval $ac_link) 2>conftest.er1
1.12889 ++if { (ac_try="$ac_link"
1.12890 ++case "(($ac_try" in
1.12891 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.12892 ++ *) ac_try_echo=$ac_try;;
1.12893 ++esac
1.12894 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.12895 ++ (eval "$ac_link") 2>conftest.er1
1.12896 + ac_status=$?
1.12897 + grep -v '^ *+' conftest.er1 >conftest.err
1.12898 + rm -f conftest.er1
1.12899 + cat conftest.err >&5
1.12900 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12901 +- (exit $ac_status); } &&
1.12902 +- { ac_try='test -z "$ac_c_werror_flag"
1.12903 +- || test ! -s conftest.err'
1.12904 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12905 +- (eval $ac_try) 2>&5
1.12906 +- ac_status=$?
1.12907 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12908 +- (exit $ac_status); }; } &&
1.12909 +- { ac_try='test -s conftest$ac_exeext'
1.12910 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.12911 +- (eval $ac_try) 2>&5
1.12912 +- ac_status=$?
1.12913 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12914 +- (exit $ac_status); }; }; then
1.12915 ++ (exit $ac_status); } && {
1.12916 ++ test -z "$ac_c_werror_flag" ||
1.12917 ++ test ! -s conftest.err
1.12918 ++ } && test -s conftest$ac_exeext &&
1.12919 ++ $as_test_x conftest$ac_exeext; then
1.12920 + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
1.12921 +
1.12922 + else
1.12923 + echo "$as_me: failed program was:" >&5
1.12924 + sed 's/^/| /' conftest.$ac_ext >&5
1.12925 +
1.12926 ++
1.12927 + fi
1.12928 +-rm -f conftest.err conftest.$ac_objext \
1.12929 ++
1.12930 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.12931 + conftest$ac_exeext conftest.$ac_ext
1.12932 + LDFLAGS="$save_LDFLAGS"
1.12933 + else
1.12934 +@@ -9373,8 +10469,8 @@
1.12935 + fi
1.12936 + fi
1.12937 +
1.12938 +-echo "$as_me:$LINENO: result: $ld_shlibs" >&5
1.12939 +-echo "${ECHO_T}$ld_shlibs" >&6
1.12940 ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
1.12941 ++echo "${ECHO_T}$ld_shlibs" >&6; }
1.12942 + test "$ld_shlibs" = no && can_build_shared=no
1.12943 +
1.12944 + with_gnu_ld=$with_gnu_ld
1.12945 +@@ -9410,46 +10506,52 @@
1.12946 + # Test whether the compiler implicitly links with -lc since on some
1.12947 + # systems, -lgcc has to come before -lc. If gcc already passes -lc
1.12948 + # to ld, don't add -lc before -lgcc.
1.12949 +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
1.12950 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
1.12951 +- $RM conftest*
1.12952 +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
1.12953 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
1.12954 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
1.12955 ++if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
1.12956 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.12957 ++else
1.12958 ++ $RM conftest*
1.12959 ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
1.12960 +
1.12961 +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.12962 ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.12963 + (eval $ac_compile) 2>&5
1.12964 + ac_status=$?
1.12965 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12966 + (exit $ac_status); } 2>conftest.err; then
1.12967 +- soname=conftest
1.12968 +- lib=conftest
1.12969 +- libobjs=conftest.$ac_objext
1.12970 +- deplibs=
1.12971 +- wl=$lt_prog_compiler_wl
1.12972 +- pic_flag=$lt_prog_compiler_pic
1.12973 +- compiler_flags=-v
1.12974 +- linker_flags=-v
1.12975 +- verstring=
1.12976 +- output_objdir=.
1.12977 +- libname=conftest
1.12978 +- lt_save_allow_undefined_flag=$allow_undefined_flag
1.12979 +- allow_undefined_flag=
1.12980 +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
1.12981 ++ soname=conftest
1.12982 ++ lib=conftest
1.12983 ++ libobjs=conftest.$ac_objext
1.12984 ++ deplibs=
1.12985 ++ wl=$lt_prog_compiler_wl
1.12986 ++ pic_flag=$lt_prog_compiler_pic
1.12987 ++ compiler_flags=-v
1.12988 ++ linker_flags=-v
1.12989 ++ verstring=
1.12990 ++ output_objdir=.
1.12991 ++ libname=conftest
1.12992 ++ lt_save_allow_undefined_flag=$allow_undefined_flag
1.12993 ++ allow_undefined_flag=
1.12994 ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
1.12995 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
1.12996 + ac_status=$?
1.12997 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.12998 + (exit $ac_status); }
1.12999 +- then
1.13000 +- archive_cmds_need_lc=no
1.13001 +- else
1.13002 +- archive_cmds_need_lc=yes
1.13003 +- fi
1.13004 +- allow_undefined_flag=$lt_save_allow_undefined_flag
1.13005 +- else
1.13006 +- cat conftest.err 1>&5
1.13007 +- fi
1.13008 +- $RM conftest*
1.13009 +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
1.13010 +-echo "${ECHO_T}$archive_cmds_need_lc" >&6
1.13011 ++ then
1.13012 ++ lt_cv_archive_cmds_need_lc=no
1.13013 ++ else
1.13014 ++ lt_cv_archive_cmds_need_lc=yes
1.13015 ++ fi
1.13016 ++ allow_undefined_flag=$lt_save_allow_undefined_flag
1.13017 ++ else
1.13018 ++ cat conftest.err 1>&5
1.13019 ++ fi
1.13020 ++ $RM conftest*
1.13021 ++
1.13022 ++fi
1.13023 ++{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
1.13024 ++echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; }
1.13025 ++ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
1.13026 + ;;
1.13027 + esac
1.13028 + fi
1.13029 +@@ -9612,8 +10714,8 @@
1.13030 +
1.13031 +
1.13032 +
1.13033 +- echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
1.13034 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
1.13035 ++ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
1.13036 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
1.13037 +
1.13038 + if test "$GCC" = yes; then
1.13039 + case $host_os in
1.13040 +@@ -10029,12 +11131,17 @@
1.13041 + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
1.13042 + shlibpath_var=LD_LIBRARY_PATH
1.13043 + shlibpath_overrides_runpath=no
1.13044 ++
1.13045 + # Some binutils ld are patched to set DT_RUNPATH
1.13046 +- save_LDFLAGS=$LDFLAGS
1.13047 +- save_libdir=$libdir
1.13048 +- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
1.13049 +- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
1.13050 +- cat >conftest.$ac_ext <<_ACEOF
1.13051 ++ if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then
1.13052 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.13053 ++else
1.13054 ++ lt_cv_shlibpath_overrides_runpath=no
1.13055 ++ save_LDFLAGS=$LDFLAGS
1.13056 ++ save_libdir=$libdir
1.13057 ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
1.13058 ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
1.13059 ++ cat >conftest.$ac_ext <<_ACEOF
1.13060 + /* confdefs.h. */
1.13061 + _ACEOF
1.13062 + cat confdefs.h >>conftest.$ac_ext
1.13063 +@@ -10050,40 +11157,42 @@
1.13064 + }
1.13065 + _ACEOF
1.13066 + rm -f conftest.$ac_objext conftest$ac_exeext
1.13067 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.13068 +- (eval $ac_link) 2>conftest.er1
1.13069 +- ac_status=$?
1.13070 +- grep -v '^ *+' conftest.er1 >conftest.err
1.13071 +- rm -f conftest.er1
1.13072 +- cat conftest.err >&5
1.13073 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13074 +- (exit $ac_status); } &&
1.13075 +- { ac_try='test -z "$ac_c_werror_flag"
1.13076 +- || test ! -s conftest.err'
1.13077 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13078 +- (eval $ac_try) 2>&5
1.13079 +- ac_status=$?
1.13080 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13081 +- (exit $ac_status); }; } &&
1.13082 +- { ac_try='test -s conftest$ac_exeext'
1.13083 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13084 +- (eval $ac_try) 2>&5
1.13085 ++if { (ac_try="$ac_link"
1.13086 ++case "(($ac_try" in
1.13087 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.13088 ++ *) ac_try_echo=$ac_try;;
1.13089 ++esac
1.13090 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.13091 ++ (eval "$ac_link") 2>conftest.er1
1.13092 + ac_status=$?
1.13093 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.13094 ++ rm -f conftest.er1
1.13095 ++ cat conftest.err >&5
1.13096 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13097 +- (exit $ac_status); }; }; then
1.13098 ++ (exit $ac_status); } && {
1.13099 ++ test -z "$ac_c_werror_flag" ||
1.13100 ++ test ! -s conftest.err
1.13101 ++ } && test -s conftest$ac_exeext &&
1.13102 ++ $as_test_x conftest$ac_exeext; then
1.13103 + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
1.13104 +- shlibpath_overrides_runpath=yes
1.13105 ++ lt_cv_shlibpath_overrides_runpath=yes
1.13106 + fi
1.13107 +
1.13108 + else
1.13109 + echo "$as_me: failed program was:" >&5
1.13110 + sed 's/^/| /' conftest.$ac_ext >&5
1.13111 +
1.13112 ++
1.13113 + fi
1.13114 +-rm -f conftest.err conftest.$ac_objext \
1.13115 ++
1.13116 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.13117 + conftest$ac_exeext conftest.$ac_ext
1.13118 +- LDFLAGS=$save_LDFLAGS
1.13119 +- libdir=$save_libdir
1.13120 ++ LDFLAGS=$save_LDFLAGS
1.13121 ++ libdir=$save_libdir
1.13122 ++
1.13123 ++fi
1.13124 ++
1.13125 ++ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
1.13126 +
1.13127 + # This implies no fast_install, which is unacceptable.
1.13128 + # Some rework will be needed to allow for fast_install
1.13129 +@@ -10293,8 +11402,8 @@
1.13130 + dynamic_linker=no
1.13131 + ;;
1.13132 + esac
1.13133 +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
1.13134 +-echo "${ECHO_T}$dynamic_linker" >&6
1.13135 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
1.13136 ++echo "${ECHO_T}$dynamic_linker" >&6; }
1.13137 + test "$dynamic_linker" = no && can_build_shared=no
1.13138 +
1.13139 + variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
1.13140 +@@ -10395,8 +11504,8 @@
1.13141 +
1.13142 +
1.13143 +
1.13144 +- echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
1.13145 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
1.13146 ++ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
1.13147 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
1.13148 + hardcode_action=
1.13149 + if test -n "$hardcode_libdir_flag_spec" ||
1.13150 + test -n "$runpath_var" ||
1.13151 +@@ -10420,8 +11529,8 @@
1.13152 + # directories.
1.13153 + hardcode_action=unsupported
1.13154 + fi
1.13155 +-echo "$as_me:$LINENO: result: $hardcode_action" >&5
1.13156 +-echo "${ECHO_T}$hardcode_action" >&6
1.13157 ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
1.13158 ++echo "${ECHO_T}$hardcode_action" >&6; }
1.13159 +
1.13160 + if test "$hardcode_action" = relink ||
1.13161 + test "$inherit_rpath" = yes; then
1.13162 +@@ -10465,8 +11574,8 @@
1.13163 +
1.13164 + darwin*)
1.13165 + # if libdl is installed we need to link against it
1.13166 +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
1.13167 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
1.13168 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
1.13169 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
1.13170 + if test "${ac_cv_lib_dl_dlopen+set}" = set; then
1.13171 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13172 + else
1.13173 +@@ -10479,56 +11588,53 @@
1.13174 + cat >>conftest.$ac_ext <<_ACEOF
1.13175 + /* end confdefs.h. */
1.13176 +
1.13177 +-/* Override any gcc2 internal prototype to avoid an error. */
1.13178 ++/* Override any GCC internal prototype to avoid an error.
1.13179 ++ Use char because int might match the return type of a GCC
1.13180 ++ builtin and then its argument prototype would still apply. */
1.13181 + #ifdef __cplusplus
1.13182 + extern "C"
1.13183 + #endif
1.13184 +-/* We use char because int might match the return type of a gcc2
1.13185 +- builtin and then its argument prototype would still apply. */
1.13186 + char dlopen ();
1.13187 + int
1.13188 + main ()
1.13189 + {
1.13190 +-dlopen ();
1.13191 ++return dlopen ();
1.13192 + ;
1.13193 + return 0;
1.13194 + }
1.13195 + _ACEOF
1.13196 + rm -f conftest.$ac_objext conftest$ac_exeext
1.13197 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.13198 +- (eval $ac_link) 2>conftest.er1
1.13199 ++if { (ac_try="$ac_link"
1.13200 ++case "(($ac_try" in
1.13201 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.13202 ++ *) ac_try_echo=$ac_try;;
1.13203 ++esac
1.13204 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.13205 ++ (eval "$ac_link") 2>conftest.er1
1.13206 + ac_status=$?
1.13207 + grep -v '^ *+' conftest.er1 >conftest.err
1.13208 + rm -f conftest.er1
1.13209 + cat conftest.err >&5
1.13210 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13211 +- (exit $ac_status); } &&
1.13212 +- { ac_try='test -z "$ac_c_werror_flag"
1.13213 +- || test ! -s conftest.err'
1.13214 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13215 +- (eval $ac_try) 2>&5
1.13216 +- ac_status=$?
1.13217 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13218 +- (exit $ac_status); }; } &&
1.13219 +- { ac_try='test -s conftest$ac_exeext'
1.13220 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13221 +- (eval $ac_try) 2>&5
1.13222 +- ac_status=$?
1.13223 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13224 +- (exit $ac_status); }; }; then
1.13225 ++ (exit $ac_status); } && {
1.13226 ++ test -z "$ac_c_werror_flag" ||
1.13227 ++ test ! -s conftest.err
1.13228 ++ } && test -s conftest$ac_exeext &&
1.13229 ++ $as_test_x conftest$ac_exeext; then
1.13230 + ac_cv_lib_dl_dlopen=yes
1.13231 + else
1.13232 + echo "$as_me: failed program was:" >&5
1.13233 + sed 's/^/| /' conftest.$ac_ext >&5
1.13234 +
1.13235 +-ac_cv_lib_dl_dlopen=no
1.13236 ++ ac_cv_lib_dl_dlopen=no
1.13237 + fi
1.13238 +-rm -f conftest.err conftest.$ac_objext \
1.13239 ++
1.13240 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.13241 + conftest$ac_exeext conftest.$ac_ext
1.13242 + LIBS=$ac_check_lib_save_LIBS
1.13243 + fi
1.13244 +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
1.13245 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
1.13246 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
1.13247 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
1.13248 + if test $ac_cv_lib_dl_dlopen = yes; then
1.13249 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
1.13250 + else
1.13251 +@@ -10542,8 +11648,8 @@
1.13252 + ;;
1.13253 +
1.13254 + *)
1.13255 +- echo "$as_me:$LINENO: checking for shl_load" >&5
1.13256 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
1.13257 ++ { echo "$as_me:$LINENO: checking for shl_load" >&5
1.13258 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
1.13259 + if test "${ac_cv_func_shl_load+set}" = set; then
1.13260 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13261 + else
1.13262 +@@ -10570,73 +11676,64 @@
1.13263 +
1.13264 + #undef shl_load
1.13265 +
1.13266 +-/* Override any gcc2 internal prototype to avoid an error. */
1.13267 ++/* Override any GCC internal prototype to avoid an error.
1.13268 ++ Use char because int might match the return type of a GCC
1.13269 ++ builtin and then its argument prototype would still apply. */
1.13270 + #ifdef __cplusplus
1.13271 + extern "C"
1.13272 +-{
1.13273 + #endif
1.13274 +-/* We use char because int might match the return type of a gcc2
1.13275 +- builtin and then its argument prototype would still apply. */
1.13276 + char shl_load ();
1.13277 + /* The GNU C library defines this for functions which it implements
1.13278 + to always fail with ENOSYS. Some functions are actually named
1.13279 + something starting with __ and the normal name is an alias. */
1.13280 +-#if defined (__stub_shl_load) || defined (__stub___shl_load)
1.13281 ++#if defined __stub_shl_load || defined __stub___shl_load
1.13282 + choke me
1.13283 +-#else
1.13284 +-char (*f) () = shl_load;
1.13285 +-#endif
1.13286 +-#ifdef __cplusplus
1.13287 +-}
1.13288 + #endif
1.13289 +
1.13290 + int
1.13291 + main ()
1.13292 + {
1.13293 +-return f != shl_load;
1.13294 ++return shl_load ();
1.13295 + ;
1.13296 + return 0;
1.13297 + }
1.13298 + _ACEOF
1.13299 + rm -f conftest.$ac_objext conftest$ac_exeext
1.13300 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.13301 +- (eval $ac_link) 2>conftest.er1
1.13302 ++if { (ac_try="$ac_link"
1.13303 ++case "(($ac_try" in
1.13304 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.13305 ++ *) ac_try_echo=$ac_try;;
1.13306 ++esac
1.13307 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.13308 ++ (eval "$ac_link") 2>conftest.er1
1.13309 + ac_status=$?
1.13310 + grep -v '^ *+' conftest.er1 >conftest.err
1.13311 + rm -f conftest.er1
1.13312 + cat conftest.err >&5
1.13313 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13314 +- (exit $ac_status); } &&
1.13315 +- { ac_try='test -z "$ac_c_werror_flag"
1.13316 +- || test ! -s conftest.err'
1.13317 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13318 +- (eval $ac_try) 2>&5
1.13319 +- ac_status=$?
1.13320 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13321 +- (exit $ac_status); }; } &&
1.13322 +- { ac_try='test -s conftest$ac_exeext'
1.13323 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13324 +- (eval $ac_try) 2>&5
1.13325 +- ac_status=$?
1.13326 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13327 +- (exit $ac_status); }; }; then
1.13328 ++ (exit $ac_status); } && {
1.13329 ++ test -z "$ac_c_werror_flag" ||
1.13330 ++ test ! -s conftest.err
1.13331 ++ } && test -s conftest$ac_exeext &&
1.13332 ++ $as_test_x conftest$ac_exeext; then
1.13333 + ac_cv_func_shl_load=yes
1.13334 + else
1.13335 + echo "$as_me: failed program was:" >&5
1.13336 + sed 's/^/| /' conftest.$ac_ext >&5
1.13337 +
1.13338 +-ac_cv_func_shl_load=no
1.13339 ++ ac_cv_func_shl_load=no
1.13340 + fi
1.13341 +-rm -f conftest.err conftest.$ac_objext \
1.13342 ++
1.13343 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.13344 + conftest$ac_exeext conftest.$ac_ext
1.13345 + fi
1.13346 +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
1.13347 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
1.13348 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
1.13349 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
1.13350 + if test $ac_cv_func_shl_load = yes; then
1.13351 + lt_cv_dlopen="shl_load"
1.13352 + else
1.13353 +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
1.13354 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
1.13355 ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
1.13356 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
1.13357 + if test "${ac_cv_lib_dld_shl_load+set}" = set; then
1.13358 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13359 + else
1.13360 +@@ -10649,61 +11746,58 @@
1.13361 + cat >>conftest.$ac_ext <<_ACEOF
1.13362 + /* end confdefs.h. */
1.13363 +
1.13364 +-/* Override any gcc2 internal prototype to avoid an error. */
1.13365 ++/* Override any GCC internal prototype to avoid an error.
1.13366 ++ Use char because int might match the return type of a GCC
1.13367 ++ builtin and then its argument prototype would still apply. */
1.13368 + #ifdef __cplusplus
1.13369 + extern "C"
1.13370 + #endif
1.13371 +-/* We use char because int might match the return type of a gcc2
1.13372 +- builtin and then its argument prototype would still apply. */
1.13373 + char shl_load ();
1.13374 + int
1.13375 + main ()
1.13376 + {
1.13377 +-shl_load ();
1.13378 ++return shl_load ();
1.13379 + ;
1.13380 + return 0;
1.13381 + }
1.13382 + _ACEOF
1.13383 + rm -f conftest.$ac_objext conftest$ac_exeext
1.13384 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.13385 +- (eval $ac_link) 2>conftest.er1
1.13386 ++if { (ac_try="$ac_link"
1.13387 ++case "(($ac_try" in
1.13388 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.13389 ++ *) ac_try_echo=$ac_try;;
1.13390 ++esac
1.13391 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.13392 ++ (eval "$ac_link") 2>conftest.er1
1.13393 + ac_status=$?
1.13394 + grep -v '^ *+' conftest.er1 >conftest.err
1.13395 + rm -f conftest.er1
1.13396 + cat conftest.err >&5
1.13397 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13398 +- (exit $ac_status); } &&
1.13399 +- { ac_try='test -z "$ac_c_werror_flag"
1.13400 +- || test ! -s conftest.err'
1.13401 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13402 +- (eval $ac_try) 2>&5
1.13403 +- ac_status=$?
1.13404 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13405 +- (exit $ac_status); }; } &&
1.13406 +- { ac_try='test -s conftest$ac_exeext'
1.13407 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13408 +- (eval $ac_try) 2>&5
1.13409 +- ac_status=$?
1.13410 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13411 +- (exit $ac_status); }; }; then
1.13412 ++ (exit $ac_status); } && {
1.13413 ++ test -z "$ac_c_werror_flag" ||
1.13414 ++ test ! -s conftest.err
1.13415 ++ } && test -s conftest$ac_exeext &&
1.13416 ++ $as_test_x conftest$ac_exeext; then
1.13417 + ac_cv_lib_dld_shl_load=yes
1.13418 + else
1.13419 + echo "$as_me: failed program was:" >&5
1.13420 + sed 's/^/| /' conftest.$ac_ext >&5
1.13421 +
1.13422 +-ac_cv_lib_dld_shl_load=no
1.13423 ++ ac_cv_lib_dld_shl_load=no
1.13424 + fi
1.13425 +-rm -f conftest.err conftest.$ac_objext \
1.13426 ++
1.13427 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.13428 + conftest$ac_exeext conftest.$ac_ext
1.13429 + LIBS=$ac_check_lib_save_LIBS
1.13430 + fi
1.13431 +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
1.13432 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
1.13433 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
1.13434 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
1.13435 + if test $ac_cv_lib_dld_shl_load = yes; then
1.13436 + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
1.13437 + else
1.13438 +- echo "$as_me:$LINENO: checking for dlopen" >&5
1.13439 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
1.13440 ++ { echo "$as_me:$LINENO: checking for dlopen" >&5
1.13441 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
1.13442 + if test "${ac_cv_func_dlopen+set}" = set; then
1.13443 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13444 + else
1.13445 +@@ -10730,73 +11824,64 @@
1.13446 +
1.13447 + #undef dlopen
1.13448 +
1.13449 +-/* Override any gcc2 internal prototype to avoid an error. */
1.13450 ++/* Override any GCC internal prototype to avoid an error.
1.13451 ++ Use char because int might match the return type of a GCC
1.13452 ++ builtin and then its argument prototype would still apply. */
1.13453 + #ifdef __cplusplus
1.13454 + extern "C"
1.13455 +-{
1.13456 + #endif
1.13457 +-/* We use char because int might match the return type of a gcc2
1.13458 +- builtin and then its argument prototype would still apply. */
1.13459 + char dlopen ();
1.13460 + /* The GNU C library defines this for functions which it implements
1.13461 + to always fail with ENOSYS. Some functions are actually named
1.13462 + something starting with __ and the normal name is an alias. */
1.13463 +-#if defined (__stub_dlopen) || defined (__stub___dlopen)
1.13464 ++#if defined __stub_dlopen || defined __stub___dlopen
1.13465 + choke me
1.13466 +-#else
1.13467 +-char (*f) () = dlopen;
1.13468 +-#endif
1.13469 +-#ifdef __cplusplus
1.13470 +-}
1.13471 + #endif
1.13472 +
1.13473 + int
1.13474 + main ()
1.13475 + {
1.13476 +-return f != dlopen;
1.13477 ++return dlopen ();
1.13478 + ;
1.13479 + return 0;
1.13480 + }
1.13481 + _ACEOF
1.13482 + rm -f conftest.$ac_objext conftest$ac_exeext
1.13483 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.13484 +- (eval $ac_link) 2>conftest.er1
1.13485 ++if { (ac_try="$ac_link"
1.13486 ++case "(($ac_try" in
1.13487 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.13488 ++ *) ac_try_echo=$ac_try;;
1.13489 ++esac
1.13490 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.13491 ++ (eval "$ac_link") 2>conftest.er1
1.13492 + ac_status=$?
1.13493 + grep -v '^ *+' conftest.er1 >conftest.err
1.13494 + rm -f conftest.er1
1.13495 + cat conftest.err >&5
1.13496 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13497 +- (exit $ac_status); } &&
1.13498 +- { ac_try='test -z "$ac_c_werror_flag"
1.13499 +- || test ! -s conftest.err'
1.13500 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13501 +- (eval $ac_try) 2>&5
1.13502 +- ac_status=$?
1.13503 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13504 +- (exit $ac_status); }; } &&
1.13505 +- { ac_try='test -s conftest$ac_exeext'
1.13506 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13507 +- (eval $ac_try) 2>&5
1.13508 +- ac_status=$?
1.13509 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13510 +- (exit $ac_status); }; }; then
1.13511 ++ (exit $ac_status); } && {
1.13512 ++ test -z "$ac_c_werror_flag" ||
1.13513 ++ test ! -s conftest.err
1.13514 ++ } && test -s conftest$ac_exeext &&
1.13515 ++ $as_test_x conftest$ac_exeext; then
1.13516 + ac_cv_func_dlopen=yes
1.13517 + else
1.13518 + echo "$as_me: failed program was:" >&5
1.13519 + sed 's/^/| /' conftest.$ac_ext >&5
1.13520 +
1.13521 +-ac_cv_func_dlopen=no
1.13522 ++ ac_cv_func_dlopen=no
1.13523 + fi
1.13524 +-rm -f conftest.err conftest.$ac_objext \
1.13525 ++
1.13526 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.13527 + conftest$ac_exeext conftest.$ac_ext
1.13528 + fi
1.13529 +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
1.13530 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
1.13531 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
1.13532 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
1.13533 + if test $ac_cv_func_dlopen = yes; then
1.13534 + lt_cv_dlopen="dlopen"
1.13535 + else
1.13536 +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
1.13537 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
1.13538 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
1.13539 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
1.13540 + if test "${ac_cv_lib_dl_dlopen+set}" = set; then
1.13541 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13542 + else
1.13543 +@@ -10809,61 +11894,58 @@
1.13544 + cat >>conftest.$ac_ext <<_ACEOF
1.13545 + /* end confdefs.h. */
1.13546 +
1.13547 +-/* Override any gcc2 internal prototype to avoid an error. */
1.13548 ++/* Override any GCC internal prototype to avoid an error.
1.13549 ++ Use char because int might match the return type of a GCC
1.13550 ++ builtin and then its argument prototype would still apply. */
1.13551 + #ifdef __cplusplus
1.13552 + extern "C"
1.13553 + #endif
1.13554 +-/* We use char because int might match the return type of a gcc2
1.13555 +- builtin and then its argument prototype would still apply. */
1.13556 + char dlopen ();
1.13557 + int
1.13558 + main ()
1.13559 + {
1.13560 +-dlopen ();
1.13561 ++return dlopen ();
1.13562 + ;
1.13563 + return 0;
1.13564 + }
1.13565 + _ACEOF
1.13566 + rm -f conftest.$ac_objext conftest$ac_exeext
1.13567 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.13568 +- (eval $ac_link) 2>conftest.er1
1.13569 ++if { (ac_try="$ac_link"
1.13570 ++case "(($ac_try" in
1.13571 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.13572 ++ *) ac_try_echo=$ac_try;;
1.13573 ++esac
1.13574 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.13575 ++ (eval "$ac_link") 2>conftest.er1
1.13576 + ac_status=$?
1.13577 + grep -v '^ *+' conftest.er1 >conftest.err
1.13578 + rm -f conftest.er1
1.13579 + cat conftest.err >&5
1.13580 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13581 +- (exit $ac_status); } &&
1.13582 +- { ac_try='test -z "$ac_c_werror_flag"
1.13583 +- || test ! -s conftest.err'
1.13584 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13585 +- (eval $ac_try) 2>&5
1.13586 +- ac_status=$?
1.13587 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13588 +- (exit $ac_status); }; } &&
1.13589 +- { ac_try='test -s conftest$ac_exeext'
1.13590 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13591 +- (eval $ac_try) 2>&5
1.13592 +- ac_status=$?
1.13593 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13594 +- (exit $ac_status); }; }; then
1.13595 ++ (exit $ac_status); } && {
1.13596 ++ test -z "$ac_c_werror_flag" ||
1.13597 ++ test ! -s conftest.err
1.13598 ++ } && test -s conftest$ac_exeext &&
1.13599 ++ $as_test_x conftest$ac_exeext; then
1.13600 + ac_cv_lib_dl_dlopen=yes
1.13601 + else
1.13602 + echo "$as_me: failed program was:" >&5
1.13603 + sed 's/^/| /' conftest.$ac_ext >&5
1.13604 +
1.13605 +-ac_cv_lib_dl_dlopen=no
1.13606 ++ ac_cv_lib_dl_dlopen=no
1.13607 + fi
1.13608 +-rm -f conftest.err conftest.$ac_objext \
1.13609 ++
1.13610 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.13611 + conftest$ac_exeext conftest.$ac_ext
1.13612 + LIBS=$ac_check_lib_save_LIBS
1.13613 + fi
1.13614 +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
1.13615 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
1.13616 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
1.13617 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
1.13618 + if test $ac_cv_lib_dl_dlopen = yes; then
1.13619 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
1.13620 + else
1.13621 +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
1.13622 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
1.13623 ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
1.13624 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
1.13625 + if test "${ac_cv_lib_svld_dlopen+set}" = set; then
1.13626 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13627 + else
1.13628 +@@ -10876,61 +11958,58 @@
1.13629 + cat >>conftest.$ac_ext <<_ACEOF
1.13630 + /* end confdefs.h. */
1.13631 +
1.13632 +-/* Override any gcc2 internal prototype to avoid an error. */
1.13633 ++/* Override any GCC internal prototype to avoid an error.
1.13634 ++ Use char because int might match the return type of a GCC
1.13635 ++ builtin and then its argument prototype would still apply. */
1.13636 + #ifdef __cplusplus
1.13637 + extern "C"
1.13638 + #endif
1.13639 +-/* We use char because int might match the return type of a gcc2
1.13640 +- builtin and then its argument prototype would still apply. */
1.13641 + char dlopen ();
1.13642 + int
1.13643 + main ()
1.13644 + {
1.13645 +-dlopen ();
1.13646 ++return dlopen ();
1.13647 + ;
1.13648 + return 0;
1.13649 + }
1.13650 + _ACEOF
1.13651 + rm -f conftest.$ac_objext conftest$ac_exeext
1.13652 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.13653 +- (eval $ac_link) 2>conftest.er1
1.13654 ++if { (ac_try="$ac_link"
1.13655 ++case "(($ac_try" in
1.13656 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.13657 ++ *) ac_try_echo=$ac_try;;
1.13658 ++esac
1.13659 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.13660 ++ (eval "$ac_link") 2>conftest.er1
1.13661 + ac_status=$?
1.13662 + grep -v '^ *+' conftest.er1 >conftest.err
1.13663 + rm -f conftest.er1
1.13664 + cat conftest.err >&5
1.13665 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13666 +- (exit $ac_status); } &&
1.13667 +- { ac_try='test -z "$ac_c_werror_flag"
1.13668 +- || test ! -s conftest.err'
1.13669 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13670 +- (eval $ac_try) 2>&5
1.13671 +- ac_status=$?
1.13672 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13673 +- (exit $ac_status); }; } &&
1.13674 +- { ac_try='test -s conftest$ac_exeext'
1.13675 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13676 +- (eval $ac_try) 2>&5
1.13677 +- ac_status=$?
1.13678 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13679 +- (exit $ac_status); }; }; then
1.13680 ++ (exit $ac_status); } && {
1.13681 ++ test -z "$ac_c_werror_flag" ||
1.13682 ++ test ! -s conftest.err
1.13683 ++ } && test -s conftest$ac_exeext &&
1.13684 ++ $as_test_x conftest$ac_exeext; then
1.13685 + ac_cv_lib_svld_dlopen=yes
1.13686 + else
1.13687 + echo "$as_me: failed program was:" >&5
1.13688 + sed 's/^/| /' conftest.$ac_ext >&5
1.13689 +
1.13690 +-ac_cv_lib_svld_dlopen=no
1.13691 ++ ac_cv_lib_svld_dlopen=no
1.13692 + fi
1.13693 +-rm -f conftest.err conftest.$ac_objext \
1.13694 ++
1.13695 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.13696 + conftest$ac_exeext conftest.$ac_ext
1.13697 + LIBS=$ac_check_lib_save_LIBS
1.13698 + fi
1.13699 +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
1.13700 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
1.13701 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
1.13702 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
1.13703 + if test $ac_cv_lib_svld_dlopen = yes; then
1.13704 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
1.13705 + else
1.13706 +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
1.13707 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
1.13708 ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
1.13709 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
1.13710 + if test "${ac_cv_lib_dld_dld_link+set}" = set; then
1.13711 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13712 + else
1.13713 +@@ -10943,56 +12022,53 @@
1.13714 + cat >>conftest.$ac_ext <<_ACEOF
1.13715 + /* end confdefs.h. */
1.13716 +
1.13717 +-/* Override any gcc2 internal prototype to avoid an error. */
1.13718 ++/* Override any GCC internal prototype to avoid an error.
1.13719 ++ Use char because int might match the return type of a GCC
1.13720 ++ builtin and then its argument prototype would still apply. */
1.13721 + #ifdef __cplusplus
1.13722 + extern "C"
1.13723 + #endif
1.13724 +-/* We use char because int might match the return type of a gcc2
1.13725 +- builtin and then its argument prototype would still apply. */
1.13726 + char dld_link ();
1.13727 + int
1.13728 + main ()
1.13729 + {
1.13730 +-dld_link ();
1.13731 ++return dld_link ();
1.13732 + ;
1.13733 + return 0;
1.13734 + }
1.13735 + _ACEOF
1.13736 + rm -f conftest.$ac_objext conftest$ac_exeext
1.13737 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.13738 +- (eval $ac_link) 2>conftest.er1
1.13739 ++if { (ac_try="$ac_link"
1.13740 ++case "(($ac_try" in
1.13741 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.13742 ++ *) ac_try_echo=$ac_try;;
1.13743 ++esac
1.13744 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.13745 ++ (eval "$ac_link") 2>conftest.er1
1.13746 + ac_status=$?
1.13747 + grep -v '^ *+' conftest.er1 >conftest.err
1.13748 + rm -f conftest.er1
1.13749 + cat conftest.err >&5
1.13750 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13751 +- (exit $ac_status); } &&
1.13752 +- { ac_try='test -z "$ac_c_werror_flag"
1.13753 +- || test ! -s conftest.err'
1.13754 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13755 +- (eval $ac_try) 2>&5
1.13756 +- ac_status=$?
1.13757 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13758 +- (exit $ac_status); }; } &&
1.13759 +- { ac_try='test -s conftest$ac_exeext'
1.13760 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.13761 +- (eval $ac_try) 2>&5
1.13762 +- ac_status=$?
1.13763 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.13764 +- (exit $ac_status); }; }; then
1.13765 ++ (exit $ac_status); } && {
1.13766 ++ test -z "$ac_c_werror_flag" ||
1.13767 ++ test ! -s conftest.err
1.13768 ++ } && test -s conftest$ac_exeext &&
1.13769 ++ $as_test_x conftest$ac_exeext; then
1.13770 + ac_cv_lib_dld_dld_link=yes
1.13771 + else
1.13772 + echo "$as_me: failed program was:" >&5
1.13773 + sed 's/^/| /' conftest.$ac_ext >&5
1.13774 +
1.13775 +-ac_cv_lib_dld_dld_link=no
1.13776 ++ ac_cv_lib_dld_dld_link=no
1.13777 + fi
1.13778 +-rm -f conftest.err conftest.$ac_objext \
1.13779 ++
1.13780 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.13781 + conftest$ac_exeext conftest.$ac_ext
1.13782 + LIBS=$ac_check_lib_save_LIBS
1.13783 + fi
1.13784 +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
1.13785 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
1.13786 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
1.13787 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
1.13788 + if test $ac_cv_lib_dld_dld_link = yes; then
1.13789 + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
1.13790 + fi
1.13791 +@@ -11032,8 +12108,8 @@
1.13792 + save_LIBS="$LIBS"
1.13793 + LIBS="$lt_cv_dlopen_libs $LIBS"
1.13794 +
1.13795 +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
1.13796 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
1.13797 ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
1.13798 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
1.13799 + if test "${lt_cv_dlopen_self+set}" = set; then
1.13800 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13801 + else
1.13802 +@@ -11043,7 +12119,7 @@
1.13803 + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
1.13804 + lt_status=$lt_dlunknown
1.13805 + cat > conftest.$ac_ext <<_LT_EOF
1.13806 +-#line 11046 "configure"
1.13807 ++#line 12122 "configure"
1.13808 + #include "confdefs.h"
1.13809 +
1.13810 + #if HAVE_DLFCN_H
1.13811 +@@ -11123,13 +12199,13 @@
1.13812 +
1.13813 +
1.13814 + fi
1.13815 +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
1.13816 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
1.13817 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
1.13818 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
1.13819 +
1.13820 + if test "x$lt_cv_dlopen_self" = xyes; then
1.13821 + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
1.13822 +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
1.13823 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
1.13824 ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
1.13825 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
1.13826 + if test "${lt_cv_dlopen_self_static+set}" = set; then
1.13827 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.13828 + else
1.13829 +@@ -11139,7 +12215,7 @@
1.13830 + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
1.13831 + lt_status=$lt_dlunknown
1.13832 + cat > conftest.$ac_ext <<_LT_EOF
1.13833 +-#line 11142 "configure"
1.13834 ++#line 12218 "configure"
1.13835 + #include "confdefs.h"
1.13836 +
1.13837 + #if HAVE_DLFCN_H
1.13838 +@@ -11219,8 +12295,8 @@
1.13839 +
1.13840 +
1.13841 + fi
1.13842 +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
1.13843 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
1.13844 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
1.13845 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
1.13846 + fi
1.13847 +
1.13848 + CPPFLAGS="$save_CPPFLAGS"
1.13849 +@@ -11258,13 +12334,13 @@
1.13850 +
1.13851 + striplib=
1.13852 + old_striplib=
1.13853 +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
1.13854 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
1.13855 ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
1.13856 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
1.13857 + if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
1.13858 + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
1.13859 + test -z "$striplib" && striplib="$STRIP --strip-unneeded"
1.13860 +- echo "$as_me:$LINENO: result: yes" >&5
1.13861 +-echo "${ECHO_T}yes" >&6
1.13862 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.13863 ++echo "${ECHO_T}yes" >&6; }
1.13864 + else
1.13865 + # FIXME - insert some real tests, host_os isn't really good enough
1.13866 + case $host_os in
1.13867 +@@ -11272,16 +12348,16 @@
1.13868 + if test -n "$STRIP" ; then
1.13869 + striplib="$STRIP -x"
1.13870 + old_striplib="$STRIP -S"
1.13871 +- echo "$as_me:$LINENO: result: yes" >&5
1.13872 +-echo "${ECHO_T}yes" >&6
1.13873 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.13874 ++echo "${ECHO_T}yes" >&6; }
1.13875 + else
1.13876 +- echo "$as_me:$LINENO: result: no" >&5
1.13877 +-echo "${ECHO_T}no" >&6
1.13878 ++ { echo "$as_me:$LINENO: result: no" >&5
1.13879 ++echo "${ECHO_T}no" >&6; }
1.13880 + fi
1.13881 + ;;
1.13882 + *)
1.13883 +- echo "$as_me:$LINENO: result: no" >&5
1.13884 +-echo "${ECHO_T}no" >&6
1.13885 ++ { echo "$as_me:$LINENO: result: no" >&5
1.13886 ++echo "${ECHO_T}no" >&6; }
1.13887 + ;;
1.13888 + esac
1.13889 + fi
1.13890 +@@ -11298,13 +12374,13 @@
1.13891 +
1.13892 +
1.13893 + # Report which library types will actually be built
1.13894 +- echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
1.13895 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
1.13896 +- echo "$as_me:$LINENO: result: $can_build_shared" >&5
1.13897 +-echo "${ECHO_T}$can_build_shared" >&6
1.13898 ++ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
1.13899 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
1.13900 ++ { echo "$as_me:$LINENO: result: $can_build_shared" >&5
1.13901 ++echo "${ECHO_T}$can_build_shared" >&6; }
1.13902 +
1.13903 +- echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
1.13904 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
1.13905 ++ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
1.13906 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
1.13907 + test "$can_build_shared" = "no" && enable_shared=no
1.13908 +
1.13909 + # On AIX, shared libraries and static libraries use the same namespace, and
1.13910 +@@ -11324,15 +12400,15 @@
1.13911 + fi
1.13912 + ;;
1.13913 + esac
1.13914 +- echo "$as_me:$LINENO: result: $enable_shared" >&5
1.13915 +-echo "${ECHO_T}$enable_shared" >&6
1.13916 ++ { echo "$as_me:$LINENO: result: $enable_shared" >&5
1.13917 ++echo "${ECHO_T}$enable_shared" >&6; }
1.13918 +
1.13919 +- echo "$as_me:$LINENO: checking whether to build static libraries" >&5
1.13920 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
1.13921 ++ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5
1.13922 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
1.13923 + # Make sure either enable_shared or enable_static is yes.
1.13924 + test "$enable_shared" = yes || enable_static=yes
1.13925 +- echo "$as_me:$LINENO: result: $enable_static" >&5
1.13926 +-echo "${ECHO_T}$enable_static" >&6
1.13927 ++ { echo "$as_me:$LINENO: result: $enable_static" >&5
1.13928 ++echo "${ECHO_T}$enable_static" >&6; }
1.13929 +
1.13930 +
1.13931 +
1.13932 +@@ -11358,7 +12434,7 @@
1.13933 +
1.13934 +
1.13935 +
1.13936 +- ac_config_commands="$ac_config_commands libtool"
1.13937 ++ ac_config_commands="$ac_config_commands libtool"
1.13938 +
1.13939 +
1.13940 +
1.13941 +@@ -11370,161 +12446,85 @@
1.13942 +
1.13943 + if test -n "${machine_dir}"; then
1.13944 + case ${machine_dir} in
1.13945 +- a29k)
1.13946 +-
1.13947 +-subdirs="$subdirs a29k"
1.13948 ++ a29k) subdirs="$subdirs a29k"
1.13949 + ;;
1.13950 +- arm)
1.13951 +-
1.13952 +-subdirs="$subdirs arm"
1.13953 ++ arm) subdirs="$subdirs arm"
1.13954 + ;;
1.13955 +- bfin)
1.13956 +-
1.13957 +-subdirs="$subdirs bfin"
1.13958 ++ avr32) subdirs="$subdirs avr32"
1.13959 + ;;
1.13960 +- cris)
1.13961 +-
1.13962 +-subdirs="$subdirs cris"
1.13963 ++ bfin) subdirs="$subdirs bfin"
1.13964 + ;;
1.13965 +- crx)
1.13966 +-
1.13967 +-subdirs="$subdirs crx"
1.13968 ++ cris) subdirs="$subdirs cris"
1.13969 + ;;
1.13970 +- d10v)
1.13971 +-
1.13972 +-subdirs="$subdirs d10v"
1.13973 ++ crx) subdirs="$subdirs crx"
1.13974 + ;;
1.13975 +- d30v)
1.13976 +-
1.13977 +-subdirs="$subdirs d30v"
1.13978 ++ d10v) subdirs="$subdirs d10v"
1.13979 + ;;
1.13980 +- fr30)
1.13981 +-
1.13982 +-subdirs="$subdirs fr30"
1.13983 ++ d30v) subdirs="$subdirs d30v"
1.13984 + ;;
1.13985 +- frv)
1.13986 +-
1.13987 +-subdirs="$subdirs frv"
1.13988 ++ fr30) subdirs="$subdirs fr30"
1.13989 + ;;
1.13990 +- h8300)
1.13991 +-
1.13992 +-subdirs="$subdirs h8300"
1.13993 ++ frv) subdirs="$subdirs frv"
1.13994 + ;;
1.13995 +- h8500)
1.13996 +-
1.13997 +-subdirs="$subdirs h8500"
1.13998 ++ h8300) subdirs="$subdirs h8300"
1.13999 + ;;
1.14000 +- hppa)
1.14001 +-
1.14002 +-subdirs="$subdirs hppa"
1.14003 ++ h8500) subdirs="$subdirs h8500"
1.14004 + ;;
1.14005 +- i386)
1.14006 +-
1.14007 +-subdirs="$subdirs i386"
1.14008 ++ hppa) subdirs="$subdirs hppa"
1.14009 + ;;
1.14010 +- i960)
1.14011 +-
1.14012 +-subdirs="$subdirs i960"
1.14013 ++ i386) subdirs="$subdirs i386"
1.14014 + ;;
1.14015 +- iq2000)
1.14016 +-
1.14017 +-subdirs="$subdirs iq2000"
1.14018 ++ i960) subdirs="$subdirs i960"
1.14019 + ;;
1.14020 +- lm32)
1.14021 +-
1.14022 +-subdirs="$subdirs lm32"
1.14023 ++ iq2000) subdirs="$subdirs iq2000"
1.14024 + ;;
1.14025 +- m32c)
1.14026 +-
1.14027 +-subdirs="$subdirs m32c"
1.14028 ++ lm32) subdirs="$subdirs lm32"
1.14029 + ;;
1.14030 +- m32r)
1.14031 +-
1.14032 +-subdirs="$subdirs m32r"
1.14033 ++ m32c) subdirs="$subdirs m32c"
1.14034 + ;;
1.14035 +- m68hc11)
1.14036 +-
1.14037 +-subdirs="$subdirs m68hc11"
1.14038 ++ m32r) subdirs="$subdirs m32r"
1.14039 + ;;
1.14040 +- m68k)
1.14041 +-
1.14042 +-subdirs="$subdirs m68k"
1.14043 ++ m68hc11) subdirs="$subdirs m68hc11"
1.14044 + ;;
1.14045 +- m88k)
1.14046 +-
1.14047 +-subdirs="$subdirs m88k"
1.14048 ++ m68k) subdirs="$subdirs m68k"
1.14049 + ;;
1.14050 +- mep )
1.14051 +-
1.14052 +-subdirs="$subdirs mep"
1.14053 ++ m88k) subdirs="$subdirs m88k"
1.14054 + ;;
1.14055 +- mips)
1.14056 +-
1.14057 +-subdirs="$subdirs mips"
1.14058 ++ mep ) subdirs="$subdirs mep"
1.14059 + ;;
1.14060 +- mn10200)
1.14061 +-
1.14062 +-subdirs="$subdirs mn10200"
1.14063 ++ mips) subdirs="$subdirs mips"
1.14064 + ;;
1.14065 +- mn10300)
1.14066 +-
1.14067 +-subdirs="$subdirs mn10300"
1.14068 ++ mn10200) subdirs="$subdirs mn10200"
1.14069 + ;;
1.14070 +- mt)
1.14071 +-
1.14072 +-subdirs="$subdirs mt"
1.14073 ++ mn10300) subdirs="$subdirs mn10300"
1.14074 + ;;
1.14075 +- necv70)
1.14076 +-
1.14077 +-subdirs="$subdirs necv70"
1.14078 ++ mt) subdirs="$subdirs mt"
1.14079 + ;;
1.14080 +- powerpc)
1.14081 +-
1.14082 +-subdirs="$subdirs powerpc"
1.14083 ++ necv70) subdirs="$subdirs necv70"
1.14084 + ;;
1.14085 +- sh)
1.14086 +-
1.14087 +-subdirs="$subdirs sh"
1.14088 ++ powerpc) subdirs="$subdirs powerpc"
1.14089 + ;;
1.14090 +- sparc)
1.14091 +-
1.14092 +-subdirs="$subdirs sparc"
1.14093 ++ sh) subdirs="$subdirs sh"
1.14094 + ;;
1.14095 +- spu)
1.14096 +-
1.14097 +-subdirs="$subdirs spu"
1.14098 ++ sparc) subdirs="$subdirs sparc"
1.14099 + ;;
1.14100 +- tic4x)
1.14101 +-
1.14102 +-subdirs="$subdirs tic4x"
1.14103 ++ spu) subdirs="$subdirs spu"
1.14104 + ;;
1.14105 +- tic80)
1.14106 +-
1.14107 +-subdirs="$subdirs tic80"
1.14108 ++ tic4x) subdirs="$subdirs tic4x"
1.14109 + ;;
1.14110 +- v850)
1.14111 +-
1.14112 +-subdirs="$subdirs v850"
1.14113 ++ tic80) subdirs="$subdirs tic80"
1.14114 + ;;
1.14115 +- w65)
1.14116 +-
1.14117 +-subdirs="$subdirs w65"
1.14118 ++ v850) subdirs="$subdirs v850"
1.14119 + ;;
1.14120 +- x86_64)
1.14121 +-
1.14122 +-subdirs="$subdirs x86_64"
1.14123 ++ w65) subdirs="$subdirs w65"
1.14124 + ;;
1.14125 +- xscale)
1.14126 +-
1.14127 +-subdirs="$subdirs xscale"
1.14128 ++ x86_64) subdirs="$subdirs x86_64"
1.14129 + ;;
1.14130 +- xstormy16)
1.14131 +-
1.14132 +-subdirs="$subdirs xstormy16"
1.14133 ++ xscale) subdirs="$subdirs xscale"
1.14134 + ;;
1.14135 +- z8k)
1.14136 +-
1.14137 +-subdirs="$subdirs z8k"
1.14138 ++ xstormy16) subdirs="$subdirs xstormy16"
1.14139 ++ ;;
1.14140 ++ z8k) subdirs="$subdirs z8k"
1.14141 + ;;
1.14142 + esac;
1.14143 + fi
1.14144 +@@ -11540,7 +12540,7 @@
1.14145 + fi
1.14146 +
1.14147 +
1.14148 +- ac_config_files="$ac_config_files Makefile"
1.14149 ++ac_config_files="$ac_config_files Makefile"
1.14150 +
1.14151 + cat >confcache <<\_ACEOF
1.14152 + # This file is a shell script that caches the results of configure
1.14153 +@@ -11560,39 +12560,58 @@
1.14154 +
1.14155 + # The following way of writing the cache mishandles newlines in values,
1.14156 + # but we know of no workaround that is simple, portable, and efficient.
1.14157 +-# So, don't put newlines in cache variables' values.
1.14158 ++# So, we kill variables containing newlines.
1.14159 + # Ultrix sh set writes to stderr and can't be redirected directly,
1.14160 + # and sets the high bit in the cache file unless we assign to the vars.
1.14161 +-{
1.14162 ++(
1.14163 ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
1.14164 ++ eval ac_val=\$$ac_var
1.14165 ++ case $ac_val in #(
1.14166 ++ *${as_nl}*)
1.14167 ++ case $ac_var in #(
1.14168 ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
1.14169 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
1.14170 ++ esac
1.14171 ++ case $ac_var in #(
1.14172 ++ _ | IFS | as_nl) ;; #(
1.14173 ++ *) $as_unset $ac_var ;;
1.14174 ++ esac ;;
1.14175 ++ esac
1.14176 ++ done
1.14177 ++
1.14178 + (set) 2>&1 |
1.14179 +- case `(ac_space=' '; set | grep ac_space) 2>&1` in
1.14180 +- *ac_space=\ *)
1.14181 ++ case $as_nl`(ac_space=' '; set) 2>&1` in #(
1.14182 ++ *${as_nl}ac_space=\ *)
1.14183 + # `set' does not quote correctly, so add quotes (double-quote
1.14184 + # substitution turns \\\\ into \\, and sed turns \\ into \).
1.14185 + sed -n \
1.14186 + "s/'/'\\\\''/g;
1.14187 + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1.14188 +- ;;
1.14189 ++ ;; #(
1.14190 + *)
1.14191 + # `set' quotes correctly as required by POSIX, so do not add quotes.
1.14192 +- sed -n \
1.14193 +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1.14194 ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
1.14195 + ;;
1.14196 +- esac;
1.14197 +-} |
1.14198 ++ esac |
1.14199 ++ sort
1.14200 ++) |
1.14201 + sed '
1.14202 ++ /^ac_cv_env_/b end
1.14203 + t clear
1.14204 +- : clear
1.14205 ++ :clear
1.14206 + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1.14207 + t end
1.14208 +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1.14209 +- : end' >>confcache
1.14210 +-if diff $cache_file confcache >/dev/null 2>&1; then :; else
1.14211 +- if test -w $cache_file; then
1.14212 +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
1.14213 ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1.14214 ++ :end' >>confcache
1.14215 ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
1.14216 ++ if test -w "$cache_file"; then
1.14217 ++ test "x$cache_file" != "x/dev/null" &&
1.14218 ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
1.14219 ++echo "$as_me: updating cache $cache_file" >&6;}
1.14220 + cat confcache >$cache_file
1.14221 + else
1.14222 +- echo "not updating unwritable cache $cache_file"
1.14223 ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
1.14224 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;}
1.14225 + fi
1.14226 + fi
1.14227 + rm -f confcache
1.14228 +@@ -11601,63 +12620,48 @@
1.14229 + # Let make expand exec_prefix.
1.14230 + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1.14231 +
1.14232 +-# VPATH may cause trouble with some makes, so we remove $(srcdir),
1.14233 +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1.14234 +-# trailing colons and then remove the whole line if VPATH becomes empty
1.14235 +-# (actually we leave an empty line to preserve line numbers).
1.14236 +-if test "x$srcdir" = x.; then
1.14237 +- ac_vpsub='/^[ ]*VPATH[ ]*=/{
1.14238 +-s/:*\$(srcdir):*/:/;
1.14239 +-s/:*\${srcdir}:*/:/;
1.14240 +-s/:*@srcdir@:*/:/;
1.14241 +-s/^\([^=]*=[ ]*\):*/\1/;
1.14242 +-s/:*$//;
1.14243 +-s/^[^=]*=[ ]*$//;
1.14244 +-}'
1.14245 +-fi
1.14246 +-
1.14247 + # Transform confdefs.h into DEFS.
1.14248 + # Protect against shell expansion while executing Makefile rules.
1.14249 + # Protect against Makefile macro expansion.
1.14250 + #
1.14251 + # If the first sed substitution is executed (which looks for macros that
1.14252 +-# take arguments), then we branch to the quote section. Otherwise,
1.14253 ++# take arguments), then branch to the quote section. Otherwise,
1.14254 + # look for a macro that doesn't take arguments.
1.14255 +-cat >confdef2opt.sed <<\_ACEOF
1.14256 ++ac_script='
1.14257 + t clear
1.14258 +-: clear
1.14259 +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
1.14260 ++:clear
1.14261 ++s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
1.14262 + t quote
1.14263 +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
1.14264 ++s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
1.14265 + t quote
1.14266 +-d
1.14267 +-: quote
1.14268 +-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
1.14269 +-s,\[,\\&,g
1.14270 +-s,\],\\&,g
1.14271 +-s,\$,$$,g
1.14272 +-p
1.14273 +-_ACEOF
1.14274 +-# We use echo to avoid assuming a particular line-breaking character.
1.14275 +-# The extra dot is to prevent the shell from consuming trailing
1.14276 +-# line-breaks from the sub-command output. A line-break within
1.14277 +-# single-quotes doesn't work because, if this script is created in a
1.14278 +-# platform that uses two characters for line-breaks (e.g., DOS), tr
1.14279 +-# would break.
1.14280 +-ac_LF_and_DOT=`echo; echo .`
1.14281 +-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
1.14282 +-rm -f confdef2opt.sed
1.14283 ++b any
1.14284 ++:quote
1.14285 ++s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
1.14286 ++s/\[/\\&/g
1.14287 ++s/\]/\\&/g
1.14288 ++s/\$/$$/g
1.14289 ++H
1.14290 ++:any
1.14291 ++${
1.14292 ++ g
1.14293 ++ s/^\n//
1.14294 ++ s/\n/ /g
1.14295 ++ p
1.14296 ++}
1.14297 ++'
1.14298 ++DEFS=`sed -n "$ac_script" confdefs.h`
1.14299 +
1.14300 +
1.14301 + ac_libobjs=
1.14302 + ac_ltlibobjs=
1.14303 + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
1.14304 + # 1. Remove the extension, and $U if already installed.
1.14305 +- ac_i=`echo "$ac_i" |
1.14306 +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
1.14307 +- # 2. Add them.
1.14308 +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
1.14309 +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
1.14310 ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
1.14311 ++ ac_i=`echo "$ac_i" | sed "$ac_script"`
1.14312 ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
1.14313 ++ # will be set to the directory where LIBOBJS objects are built.
1.14314 ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
1.14315 ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
1.14316 + done
1.14317 + LIBOBJS=$ac_libobjs
1.14318 +
1.14319 +@@ -11772,17 +12776,45 @@
1.14320 + ## M4sh Initialization. ##
1.14321 + ## --------------------- ##
1.14322 +
1.14323 +-# Be Bourne compatible
1.14324 ++# Be more Bourne compatible
1.14325 ++DUALCASE=1; export DUALCASE # for MKS sh
1.14326 + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.14327 + emulate sh
1.14328 + NULLCMD=:
1.14329 + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.14330 + # is contrary to our usage. Disable this feature.
1.14331 + alias -g '${1+"$@"}'='"$@"'
1.14332 +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1.14333 +- set -o posix
1.14334 ++ setopt NO_GLOB_SUBST
1.14335 ++else
1.14336 ++ case `(set -o) 2>/dev/null` in
1.14337 ++ *posix*) set -o posix ;;
1.14338 ++esac
1.14339 ++
1.14340 ++fi
1.14341 ++
1.14342 ++
1.14343 ++
1.14344 ++
1.14345 ++# PATH needs CR
1.14346 ++# Avoid depending upon Character Ranges.
1.14347 ++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.14348 ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.14349 ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.14350 ++as_cr_digits='0123456789'
1.14351 ++as_cr_alnum=$as_cr_Letters$as_cr_digits
1.14352 ++
1.14353 ++# The user is always right.
1.14354 ++if test "${PATH_SEPARATOR+set}" != set; then
1.14355 ++ echo "#! /bin/sh" >conf$$.sh
1.14356 ++ echo "exit 0" >>conf$$.sh
1.14357 ++ chmod +x conf$$.sh
1.14358 ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.14359 ++ PATH_SEPARATOR=';'
1.14360 ++ else
1.14361 ++ PATH_SEPARATOR=:
1.14362 ++ fi
1.14363 ++ rm -f conf$$.sh
1.14364 + fi
1.14365 +-DUALCASE=1; export DUALCASE # for MKS sh
1.14366 +
1.14367 + # Support unset when possible.
1.14368 + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.14369 +@@ -11792,8 +12824,43 @@
1.14370 + fi
1.14371 +
1.14372 +
1.14373 ++# IFS
1.14374 ++# We need space, tab and new line, in precisely that order. Quoting is
1.14375 ++# there to prevent editors from complaining about space-tab.
1.14376 ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
1.14377 ++# splitting by setting IFS to empty value.)
1.14378 ++as_nl='
1.14379 ++'
1.14380 ++IFS=" "" $as_nl"
1.14381 ++
1.14382 ++# Find who we are. Look in the path if we contain no directory separator.
1.14383 ++case $0 in
1.14384 ++ *[\\/]* ) as_myself=$0 ;;
1.14385 ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.14386 ++for as_dir in $PATH
1.14387 ++do
1.14388 ++ IFS=$as_save_IFS
1.14389 ++ test -z "$as_dir" && as_dir=.
1.14390 ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.14391 ++done
1.14392 ++IFS=$as_save_IFS
1.14393 ++
1.14394 ++ ;;
1.14395 ++esac
1.14396 ++# We did not find ourselves, most probably we were run as `sh COMMAND'
1.14397 ++# in which case we are not to be found in the path.
1.14398 ++if test "x$as_myself" = x; then
1.14399 ++ as_myself=$0
1.14400 ++fi
1.14401 ++if test ! -f "$as_myself"; then
1.14402 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
1.14403 ++ { (exit 1); exit 1; }
1.14404 ++fi
1.14405 ++
1.14406 + # Work around bugs in pre-3.0 UWIN ksh.
1.14407 +-$as_unset ENV MAIL MAILPATH
1.14408 ++for as_var in ENV MAIL MAILPATH
1.14409 ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.14410 ++done
1.14411 + PS1='$ '
1.14412 + PS2='> '
1.14413 + PS4='+ '
1.14414 +@@ -11807,18 +12874,19 @@
1.14415 + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1.14416 + eval $as_var=C; export $as_var
1.14417 + else
1.14418 +- $as_unset $as_var
1.14419 ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.14420 + fi
1.14421 + done
1.14422 +
1.14423 + # Required to use basename.
1.14424 +-if expr a : '\(a\)' >/dev/null 2>&1; then
1.14425 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.14426 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.14427 + as_expr=expr
1.14428 + else
1.14429 + as_expr=false
1.14430 + fi
1.14431 +
1.14432 +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
1.14433 ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
1.14434 + as_basename=basename
1.14435 + else
1.14436 + as_basename=false
1.14437 +@@ -11826,159 +12894,120 @@
1.14438 +
1.14439 +
1.14440 + # Name of the executable.
1.14441 +-as_me=`$as_basename "$0" ||
1.14442 ++as_me=`$as_basename -- "$0" ||
1.14443 + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1.14444 + X"$0" : 'X\(//\)$' \| \
1.14445 +- X"$0" : 'X\(/\)$' \| \
1.14446 +- . : '\(.\)' 2>/dev/null ||
1.14447 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.14448 + echo X/"$0" |
1.14449 +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
1.14450 +- /^X\/\(\/\/\)$/{ s//\1/; q; }
1.14451 +- /^X\/\(\/\).*/{ s//\1/; q; }
1.14452 +- s/.*/./; q'`
1.14453 +-
1.14454 +-
1.14455 +-# PATH needs CR, and LINENO needs CR and PATH.
1.14456 +-# Avoid depending upon Character Ranges.
1.14457 +-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.14458 +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.14459 +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.14460 +-as_cr_digits='0123456789'
1.14461 +-as_cr_alnum=$as_cr_Letters$as_cr_digits
1.14462 +-
1.14463 +-# The user is always right.
1.14464 +-if test "${PATH_SEPARATOR+set}" != set; then
1.14465 +- echo "#! /bin/sh" >conf$$.sh
1.14466 +- echo "exit 0" >>conf$$.sh
1.14467 +- chmod +x conf$$.sh
1.14468 +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.14469 +- PATH_SEPARATOR=';'
1.14470 +- else
1.14471 +- PATH_SEPARATOR=:
1.14472 +- fi
1.14473 +- rm -f conf$$.sh
1.14474 +-fi
1.14475 ++ sed '/^.*\/\([^/][^/]*\)\/*$/{
1.14476 ++ s//\1/
1.14477 ++ q
1.14478 ++ }
1.14479 ++ /^X\/\(\/\/\)$/{
1.14480 ++ s//\1/
1.14481 ++ q
1.14482 ++ }
1.14483 ++ /^X\/\(\/\).*/{
1.14484 ++ s//\1/
1.14485 ++ q
1.14486 ++ }
1.14487 ++ s/.*/./; q'`
1.14488 ++
1.14489 ++# CDPATH.
1.14490 ++$as_unset CDPATH
1.14491 +
1.14492 +
1.14493 +- as_lineno_1=$LINENO
1.14494 +- as_lineno_2=$LINENO
1.14495 +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1.14496 +- test "x$as_lineno_1" != "x$as_lineno_2" &&
1.14497 +- test "x$as_lineno_3" = "x$as_lineno_2" || {
1.14498 +- # Find who we are. Look in the path if we contain no path at all
1.14499 +- # relative or not.
1.14500 +- case $0 in
1.14501 +- *[\\/]* ) as_myself=$0 ;;
1.14502 +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.14503 +-for as_dir in $PATH
1.14504 +-do
1.14505 +- IFS=$as_save_IFS
1.14506 +- test -z "$as_dir" && as_dir=.
1.14507 +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.14508 +-done
1.14509 +
1.14510 +- ;;
1.14511 +- esac
1.14512 +- # We did not find ourselves, most probably we were run as `sh COMMAND'
1.14513 +- # in which case we are not to be found in the path.
1.14514 +- if test "x$as_myself" = x; then
1.14515 +- as_myself=$0
1.14516 +- fi
1.14517 +- if test ! -f "$as_myself"; then
1.14518 +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
1.14519 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
1.14520 +- { (exit 1); exit 1; }; }
1.14521 +- fi
1.14522 +- case $CONFIG_SHELL in
1.14523 +- '')
1.14524 +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.14525 +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1.14526 +-do
1.14527 +- IFS=$as_save_IFS
1.14528 +- test -z "$as_dir" && as_dir=.
1.14529 +- for as_base in sh bash ksh sh5; do
1.14530 +- case $as_dir in
1.14531 +- /*)
1.14532 +- if ("$as_dir/$as_base" -c '
1.14533 + as_lineno_1=$LINENO
1.14534 + as_lineno_2=$LINENO
1.14535 +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1.14536 + test "x$as_lineno_1" != "x$as_lineno_2" &&
1.14537 +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
1.14538 +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
1.14539 +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
1.14540 +- CONFIG_SHELL=$as_dir/$as_base
1.14541 +- export CONFIG_SHELL
1.14542 +- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
1.14543 +- fi;;
1.14544 +- esac
1.14545 +- done
1.14546 +-done
1.14547 +-;;
1.14548 +- esac
1.14549 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
1.14550 +
1.14551 + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1.14552 + # uniformly replaced by the line number. The first 'sed' inserts a
1.14553 +- # line-number line before each line; the second 'sed' does the real
1.14554 +- # work. The second script uses 'N' to pair each line-number line
1.14555 +- # with the numbered line, and appends trailing '-' during
1.14556 +- # substitution so that $LINENO is not a special case at line end.
1.14557 ++ # line-number line after each line using $LINENO; the second 'sed'
1.14558 ++ # does the real work. The second script uses 'N' to pair each
1.14559 ++ # line-number line with the line containing $LINENO, and appends
1.14560 ++ # trailing '-' during substitution so that $LINENO is not a special
1.14561 ++ # case at line end.
1.14562 + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1.14563 +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
1.14564 +- sed '=' <$as_myself |
1.14565 ++ # scripts with optimization help from Paolo Bonzini. Blame Lee
1.14566 ++ # E. McMahon (1931-1989) for sed's syntax. :-)
1.14567 ++ sed -n '
1.14568 ++ p
1.14569 ++ /[$]LINENO/=
1.14570 ++ ' <$as_myself |
1.14571 + sed '
1.14572 ++ s/[$]LINENO.*/&-/
1.14573 ++ t lineno
1.14574 ++ b
1.14575 ++ :lineno
1.14576 + N
1.14577 +- s,$,-,
1.14578 +- : loop
1.14579 +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
1.14580 ++ :loop
1.14581 ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
1.14582 + t loop
1.14583 +- s,-$,,
1.14584 +- s,^['$as_cr_digits']*\n,,
1.14585 ++ s/-\n.*//
1.14586 + ' >$as_me.lineno &&
1.14587 +- chmod +x $as_me.lineno ||
1.14588 +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
1.14589 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
1.14590 ++ chmod +x "$as_me.lineno" ||
1.14591 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
1.14592 + { (exit 1); exit 1; }; }
1.14593 +
1.14594 + # Don't try to exec as it changes $[0], causing all sort of problems
1.14595 + # (the dirname of $[0] is not the place where we might find the
1.14596 +- # original and so on. Autoconf is especially sensible to this).
1.14597 +- . ./$as_me.lineno
1.14598 ++ # original and so on. Autoconf is especially sensitive to this).
1.14599 ++ . "./$as_me.lineno"
1.14600 + # Exit status is that of the last command.
1.14601 + exit
1.14602 + }
1.14603 +
1.14604 +
1.14605 +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1.14606 +- *c*,-n*) ECHO_N= ECHO_C='
1.14607 +-' ECHO_T=' ' ;;
1.14608 +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
1.14609 +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
1.14610 ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
1.14611 ++ as_dirname=dirname
1.14612 ++else
1.14613 ++ as_dirname=false
1.14614 ++fi
1.14615 ++
1.14616 ++ECHO_C= ECHO_N= ECHO_T=
1.14617 ++case `echo -n x` in
1.14618 ++-n*)
1.14619 ++ case `echo 'x\c'` in
1.14620 ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
1.14621 ++ *) ECHO_C='\c';;
1.14622 ++ esac;;
1.14623 ++*)
1.14624 ++ ECHO_N='-n';;
1.14625 + esac
1.14626 +
1.14627 +-if expr a : '\(a\)' >/dev/null 2>&1; then
1.14628 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.14629 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.14630 + as_expr=expr
1.14631 + else
1.14632 + as_expr=false
1.14633 + fi
1.14634 +
1.14635 + rm -f conf$$ conf$$.exe conf$$.file
1.14636 ++if test -d conf$$.dir; then
1.14637 ++ rm -f conf$$.dir/conf$$.file
1.14638 ++else
1.14639 ++ rm -f conf$$.dir
1.14640 ++ mkdir conf$$.dir
1.14641 ++fi
1.14642 + echo >conf$$.file
1.14643 + if ln -s conf$$.file conf$$ 2>/dev/null; then
1.14644 +- # We could just check for DJGPP; but this test a) works b) is more generic
1.14645 +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1.14646 +- if test -f conf$$.exe; then
1.14647 +- # Don't use ln at all; we don't have any links
1.14648 ++ as_ln_s='ln -s'
1.14649 ++ # ... but there are two gotchas:
1.14650 ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
1.14651 ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
1.14652 ++ # In both cases, we have to default to `cp -p'.
1.14653 ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
1.14654 + as_ln_s='cp -p'
1.14655 +- else
1.14656 +- as_ln_s='ln -s'
1.14657 +- fi
1.14658 + elif ln conf$$.file conf$$ 2>/dev/null; then
1.14659 + as_ln_s=ln
1.14660 + else
1.14661 + as_ln_s='cp -p'
1.14662 + fi
1.14663 +-rm -f conf$$ conf$$.exe conf$$.file
1.14664 ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
1.14665 ++rmdir conf$$.dir 2>/dev/null
1.14666 +
1.14667 + if mkdir -p . 2>/dev/null; then
1.14668 + as_mkdir_p=:
1.14669 +@@ -11987,7 +13016,28 @@
1.14670 + as_mkdir_p=false
1.14671 + fi
1.14672 +
1.14673 +-as_executable_p="test -f"
1.14674 ++if test -x / >/dev/null 2>&1; then
1.14675 ++ as_test_x='test -x'
1.14676 ++else
1.14677 ++ if ls -dL / >/dev/null 2>&1; then
1.14678 ++ as_ls_L_option=L
1.14679 ++ else
1.14680 ++ as_ls_L_option=
1.14681 ++ fi
1.14682 ++ as_test_x='
1.14683 ++ eval sh -c '\''
1.14684 ++ if test -d "$1"; then
1.14685 ++ test -d "$1/.";
1.14686 ++ else
1.14687 ++ case $1 in
1.14688 ++ -*)set "./$1";;
1.14689 ++ esac;
1.14690 ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
1.14691 ++ ???[sx]*):;;*)false;;esac;fi
1.14692 ++ '\'' sh
1.14693 ++ '
1.14694 ++fi
1.14695 ++as_executable_p=$as_test_x
1.14696 +
1.14697 + # Sed expression to map a string onto a valid CPP name.
1.14698 + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1.14699 +@@ -11996,31 +13046,14 @@
1.14700 + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1.14701 +
1.14702 +
1.14703 +-# IFS
1.14704 +-# We need space, tab and new line, in precisely that order.
1.14705 +-as_nl='
1.14706 +-'
1.14707 +-IFS=" $as_nl"
1.14708 +-
1.14709 +-# CDPATH.
1.14710 +-$as_unset CDPATH
1.14711 +-
1.14712 + exec 6>&1
1.14713 +
1.14714 +-# Open the log real soon, to keep \$[0] and so on meaningful, and to
1.14715 ++# Save the log message, to keep $[0] and so on meaningful, and to
1.14716 + # report actual input values of CONFIG_FILES etc. instead of their
1.14717 +-# values after options handling. Logging --version etc. is OK.
1.14718 +-exec 5>>config.log
1.14719 +-{
1.14720 +- echo
1.14721 +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1.14722 +-## Running $as_me. ##
1.14723 +-_ASBOX
1.14724 +-} >&5
1.14725 +-cat >&5 <<_CSEOF
1.14726 +-
1.14727 ++# values after options handling.
1.14728 ++ac_log="
1.14729 + This file was extended by newlib $as_me 1.17.0, which was
1.14730 +-generated by GNU Autoconf 2.59. Invocation command line was
1.14731 ++generated by GNU Autoconf 2.61. Invocation command line was
1.14732 +
1.14733 + CONFIG_FILES = $CONFIG_FILES
1.14734 + CONFIG_HEADERS = $CONFIG_HEADERS
1.14735 +@@ -12028,30 +13061,19 @@
1.14736 + CONFIG_COMMANDS = $CONFIG_COMMANDS
1.14737 + $ $0 $@
1.14738 +
1.14739 +-_CSEOF
1.14740 +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
1.14741 +-echo >&5
1.14742 ++on `(hostname || uname -n) 2>/dev/null | sed 1q`
1.14743 ++"
1.14744 ++
1.14745 + _ACEOF
1.14746 +
1.14747 ++cat >>$CONFIG_STATUS <<_ACEOF
1.14748 + # Files that config.status was made for.
1.14749 +-if test -n "$ac_config_files"; then
1.14750 +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
1.14751 +-fi
1.14752 +-
1.14753 +-if test -n "$ac_config_headers"; then
1.14754 +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
1.14755 +-fi
1.14756 +-
1.14757 +-if test -n "$ac_config_links"; then
1.14758 +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
1.14759 +-fi
1.14760 ++config_files="$ac_config_files"
1.14761 ++config_commands="$ac_config_commands"
1.14762 +
1.14763 +-if test -n "$ac_config_commands"; then
1.14764 +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
1.14765 +-fi
1.14766 ++_ACEOF
1.14767 +
1.14768 + cat >>$CONFIG_STATUS <<\_ACEOF
1.14769 +-
1.14770 + ac_cs_usage="\
1.14771 + \`$as_me' instantiates files from templates according to the
1.14772 + current configuration.
1.14773 +@@ -12059,7 +13081,7 @@
1.14774 + Usage: $0 [OPTIONS] [FILE]...
1.14775 +
1.14776 + -h, --help print this help, then exit
1.14777 +- -V, --version print version number, then exit
1.14778 ++ -V, --version print version number and configuration settings, then exit
1.14779 + -q, --quiet do not print progress messages
1.14780 + -d, --debug don't remove temporary files
1.14781 + --recheck update $as_me by reconfiguring in the same conditions
1.14782 +@@ -12073,19 +13095,21 @@
1.14783 + $config_commands
1.14784 +
1.14785 + Report bugs to <bug-autoconf@gnu.org>."
1.14786 +-_ACEOF
1.14787 +
1.14788 ++_ACEOF
1.14789 + cat >>$CONFIG_STATUS <<_ACEOF
1.14790 + ac_cs_version="\\
1.14791 + newlib config.status 1.17.0
1.14792 +-configured by $0, generated by GNU Autoconf 2.59,
1.14793 +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
1.14794 ++configured by $0, generated by GNU Autoconf 2.61,
1.14795 ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
1.14796 +
1.14797 +-Copyright (C) 2003 Free Software Foundation, Inc.
1.14798 ++Copyright (C) 2006 Free Software Foundation, Inc.
1.14799 + This config.status script is free software; the Free Software Foundation
1.14800 + gives unlimited permission to copy, distribute and modify it."
1.14801 +-srcdir=$srcdir
1.14802 +-INSTALL="$INSTALL"
1.14803 ++
1.14804 ++ac_pwd='$ac_pwd'
1.14805 ++srcdir='$srcdir'
1.14806 ++INSTALL='$INSTALL'
1.14807 + _ACEOF
1.14808 +
1.14809 + cat >>$CONFIG_STATUS <<\_ACEOF
1.14810 +@@ -12096,60 +13120,42 @@
1.14811 + do
1.14812 + case $1 in
1.14813 + --*=*)
1.14814 +- ac_option=`expr "x$1" : 'x\([^=]*\)='`
1.14815 +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
1.14816 ++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
1.14817 ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
1.14818 + ac_shift=:
1.14819 + ;;
1.14820 +- -*)
1.14821 ++ *)
1.14822 + ac_option=$1
1.14823 + ac_optarg=$2
1.14824 + ac_shift=shift
1.14825 + ;;
1.14826 +- *) # This is not an option, so the user has probably given explicit
1.14827 +- # arguments.
1.14828 +- ac_option=$1
1.14829 +- ac_need_defaults=false;;
1.14830 + esac
1.14831 +
1.14832 + case $ac_option in
1.14833 + # Handling of the options.
1.14834 +-_ACEOF
1.14835 +-cat >>$CONFIG_STATUS <<\_ACEOF
1.14836 + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
1.14837 + ac_cs_recheck=: ;;
1.14838 +- --version | --vers* | -V )
1.14839 +- echo "$ac_cs_version"; exit 0 ;;
1.14840 +- --he | --h)
1.14841 +- # Conflict between --help and --header
1.14842 +- { { echo "$as_me:$LINENO: error: ambiguous option: $1
1.14843 +-Try \`$0 --help' for more information." >&5
1.14844 +-echo "$as_me: error: ambiguous option: $1
1.14845 +-Try \`$0 --help' for more information." >&2;}
1.14846 +- { (exit 1); exit 1; }; };;
1.14847 +- --help | --hel | -h )
1.14848 +- echo "$ac_cs_usage"; exit 0 ;;
1.14849 +- --debug | --d* | -d )
1.14850 ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
1.14851 ++ echo "$ac_cs_version"; exit ;;
1.14852 ++ --debug | --debu | --deb | --de | --d | -d )
1.14853 + debug=: ;;
1.14854 + --file | --fil | --fi | --f )
1.14855 + $ac_shift
1.14856 + CONFIG_FILES="$CONFIG_FILES $ac_optarg"
1.14857 + ac_need_defaults=false;;
1.14858 +- --header | --heade | --head | --hea )
1.14859 +- $ac_shift
1.14860 +- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
1.14861 +- ac_need_defaults=false;;
1.14862 ++ --he | --h | --help | --hel | -h )
1.14863 ++ echo "$ac_cs_usage"; exit ;;
1.14864 + -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.14865 + | -silent | --silent | --silen | --sile | --sil | --si | --s)
1.14866 + ac_cs_silent=: ;;
1.14867 +
1.14868 + # This is an error.
1.14869 +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
1.14870 +-Try \`$0 --help' for more information." >&5
1.14871 +-echo "$as_me: error: unrecognized option: $1
1.14872 +-Try \`$0 --help' for more information." >&2;}
1.14873 ++ -*) { echo "$as_me: error: unrecognized option: $1
1.14874 ++Try \`$0 --help' for more information." >&2
1.14875 + { (exit 1); exit 1; }; } ;;
1.14876 +
1.14877 +- *) ac_config_targets="$ac_config_targets $1" ;;
1.14878 ++ *) ac_config_targets="$ac_config_targets $1"
1.14879 ++ ac_need_defaults=false ;;
1.14880 +
1.14881 + esac
1.14882 + shift
1.14883 +@@ -12165,17 +13171,28 @@
1.14884 + _ACEOF
1.14885 + cat >>$CONFIG_STATUS <<_ACEOF
1.14886 + if \$ac_cs_recheck; then
1.14887 +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
1.14888 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
1.14889 ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
1.14890 ++ CONFIG_SHELL=$SHELL
1.14891 ++ export CONFIG_SHELL
1.14892 ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
1.14893 + fi
1.14894 +
1.14895 + _ACEOF
1.14896 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.14897 ++exec 5>>config.log
1.14898 ++{
1.14899 ++ echo
1.14900 ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1.14901 ++## Running $as_me. ##
1.14902 ++_ASBOX
1.14903 ++ echo "$ac_log"
1.14904 ++} >&5
1.14905 +
1.14906 ++_ACEOF
1.14907 + cat >>$CONFIG_STATUS <<_ACEOF
1.14908 + #
1.14909 +-# INIT-COMMANDS section.
1.14910 ++# INIT-COMMANDS
1.14911 + #
1.14912 +-
1.14913 + AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
1.14914 +
1.14915 +
1.14916 +@@ -12436,22 +13453,23 @@
1.14917 +
1.14918 + _ACEOF
1.14919 +
1.14920 +-
1.14921 +-
1.14922 + cat >>$CONFIG_STATUS <<\_ACEOF
1.14923 ++
1.14924 ++# Handling of arguments.
1.14925 + for ac_config_target in $ac_config_targets
1.14926 + do
1.14927 +- case "$ac_config_target" in
1.14928 +- # Handling of arguments.
1.14929 +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
1.14930 +- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
1.14931 +- "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
1.14932 ++ case $ac_config_target in
1.14933 ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
1.14934 ++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
1.14935 ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
1.14936 ++
1.14937 + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
1.14938 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
1.14939 + { (exit 1); exit 1; }; };;
1.14940 + esac
1.14941 + done
1.14942 +
1.14943 ++
1.14944 + # If the user did not use the arguments to specify the items to instantiate,
1.14945 + # then the envvar interface is used. Set only those that are not.
1.14946 + # We use the long form for the default assignment because of an extremely
1.14947 +@@ -12462,396 +13480,492 @@
1.14948 + fi
1.14949 +
1.14950 + # Have a temporary directory for convenience. Make it in the build tree
1.14951 +-# simply because there is no reason to put it here, and in addition,
1.14952 ++# simply because there is no reason against having it here, and in addition,
1.14953 + # creating and moving files from /tmp can sometimes cause problems.
1.14954 +-# Create a temporary directory, and hook for its removal unless debugging.
1.14955 ++# Hook for its removal unless debugging.
1.14956 ++# Note that there is a small window in which the directory will not be cleaned:
1.14957 ++# after its creation but before its name has been assigned to `$tmp'.
1.14958 + $debug ||
1.14959 + {
1.14960 +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
1.14961 ++ tmp=
1.14962 ++ trap 'exit_status=$?
1.14963 ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
1.14964 ++' 0
1.14965 + trap '{ (exit 1); exit 1; }' 1 2 13 15
1.14966 + }
1.14967 +-
1.14968 + # Create a (secure) tmp directory for tmp files.
1.14969 +
1.14970 + {
1.14971 +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
1.14972 ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
1.14973 + test -n "$tmp" && test -d "$tmp"
1.14974 + } ||
1.14975 + {
1.14976 +- tmp=./confstat$$-$RANDOM
1.14977 +- (umask 077 && mkdir $tmp)
1.14978 ++ tmp=./conf$$-$RANDOM
1.14979 ++ (umask 077 && mkdir "$tmp")
1.14980 + } ||
1.14981 + {
1.14982 + echo "$me: cannot create a temporary directory in ." >&2
1.14983 + { (exit 1); exit 1; }
1.14984 + }
1.14985 +
1.14986 +-_ACEOF
1.14987 +-
1.14988 +-cat >>$CONFIG_STATUS <<_ACEOF
1.14989 +-
1.14990 + #
1.14991 +-# CONFIG_FILES section.
1.14992 ++# Set up the sed scripts for CONFIG_FILES section.
1.14993 + #
1.14994 +
1.14995 + # No need to generate the scripts if there are no CONFIG_FILES.
1.14996 + # This happens for instance when ./config.status config.h
1.14997 +-if test -n "\$CONFIG_FILES"; then
1.14998 +- # Protect against being on the right side of a sed subst in config.status.
1.14999 +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
1.15000 +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
1.15001 +-s,@SHELL@,$SHELL,;t t
1.15002 +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
1.15003 +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
1.15004 +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
1.15005 +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
1.15006 +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
1.15007 +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
1.15008 +-s,@exec_prefix@,$exec_prefix,;t t
1.15009 +-s,@prefix@,$prefix,;t t
1.15010 +-s,@program_transform_name@,$program_transform_name,;t t
1.15011 +-s,@bindir@,$bindir,;t t
1.15012 +-s,@sbindir@,$sbindir,;t t
1.15013 +-s,@libexecdir@,$libexecdir,;t t
1.15014 +-s,@datadir@,$datadir,;t t
1.15015 +-s,@sysconfdir@,$sysconfdir,;t t
1.15016 +-s,@sharedstatedir@,$sharedstatedir,;t t
1.15017 +-s,@localstatedir@,$localstatedir,;t t
1.15018 +-s,@libdir@,$libdir,;t t
1.15019 +-s,@includedir@,$includedir,;t t
1.15020 +-s,@oldincludedir@,$oldincludedir,;t t
1.15021 +-s,@infodir@,$infodir,;t t
1.15022 +-s,@mandir@,$mandir,;t t
1.15023 +-s,@build_alias@,$build_alias,;t t
1.15024 +-s,@host_alias@,$host_alias,;t t
1.15025 +-s,@target_alias@,$target_alias,;t t
1.15026 +-s,@DEFS@,$DEFS,;t t
1.15027 +-s,@ECHO_C@,$ECHO_C,;t t
1.15028 +-s,@ECHO_N@,$ECHO_N,;t t
1.15029 +-s,@ECHO_T@,$ECHO_T,;t t
1.15030 +-s,@LIBS@,$LIBS,;t t
1.15031 +-s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t
1.15032 +-s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t
1.15033 +-s,@newlib_basedir@,$newlib_basedir,;t t
1.15034 +-s,@build@,$build,;t t
1.15035 +-s,@build_cpu@,$build_cpu,;t t
1.15036 +-s,@build_vendor@,$build_vendor,;t t
1.15037 +-s,@build_os@,$build_os,;t t
1.15038 +-s,@host@,$host,;t t
1.15039 +-s,@host_cpu@,$host_cpu,;t t
1.15040 +-s,@host_vendor@,$host_vendor,;t t
1.15041 +-s,@host_os@,$host_os,;t t
1.15042 +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
1.15043 +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
1.15044 +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
1.15045 +-s,@CYGPATH_W@,$CYGPATH_W,;t t
1.15046 +-s,@PACKAGE@,$PACKAGE,;t t
1.15047 +-s,@VERSION@,$VERSION,;t t
1.15048 +-s,@ACLOCAL@,$ACLOCAL,;t t
1.15049 +-s,@AUTOCONF@,$AUTOCONF,;t t
1.15050 +-s,@AUTOMAKE@,$AUTOMAKE,;t t
1.15051 +-s,@AUTOHEADER@,$AUTOHEADER,;t t
1.15052 +-s,@MAKEINFO@,$MAKEINFO,;t t
1.15053 +-s,@install_sh@,$install_sh,;t t
1.15054 +-s,@STRIP@,$STRIP,;t t
1.15055 +-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
1.15056 +-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
1.15057 +-s,@mkdir_p@,$mkdir_p,;t t
1.15058 +-s,@AWK@,$AWK,;t t
1.15059 +-s,@SET_MAKE@,$SET_MAKE,;t t
1.15060 +-s,@am__leading_dot@,$am__leading_dot,;t t
1.15061 +-s,@AMTAR@,$AMTAR,;t t
1.15062 +-s,@am__tar@,$am__tar,;t t
1.15063 +-s,@am__untar@,$am__untar,;t t
1.15064 +-s,@CC@,$CC,;t t
1.15065 +-s,@DEPDIR@,$DEPDIR,;t t
1.15066 +-s,@am__include@,$am__include,;t t
1.15067 +-s,@am__quote@,$am__quote,;t t
1.15068 +-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
1.15069 +-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
1.15070 +-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
1.15071 +-s,@CCDEPMODE@,$CCDEPMODE,;t t
1.15072 +-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
1.15073 +-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
1.15074 +-s,@AS@,$AS,;t t
1.15075 +-s,@ac_ct_AS@,$ac_ct_AS,;t t
1.15076 +-s,@AR@,$AR,;t t
1.15077 +-s,@ac_ct_AR@,$ac_ct_AR,;t t
1.15078 +-s,@RANLIB@,$RANLIB,;t t
1.15079 +-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
1.15080 +-s,@READELF@,$READELF,;t t
1.15081 +-s,@ac_ct_READELF@,$ac_ct_READELF,;t t
1.15082 +-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
1.15083 +-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
1.15084 +-s,@MAINT@,$MAINT,;t t
1.15085 +-s,@CCAS@,$CCAS,;t t
1.15086 +-s,@CCASFLAGS@,$CCASFLAGS,;t t
1.15087 +-s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t
1.15088 +-s,@LDFLAGS@,$LDFLAGS,;t t
1.15089 +-s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t
1.15090 +-s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t
1.15091 +-s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t
1.15092 +-s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t
1.15093 +-s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t
1.15094 +-s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t
1.15095 +-s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t
1.15096 +-s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t
1.15097 +-s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t
1.15098 +-s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t
1.15099 +-s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t
1.15100 +-s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t
1.15101 +-s,@OBJEXT@,$OBJEXT,;t t
1.15102 +-s,@oext@,$oext,;t t
1.15103 +-s,@aext@,$aext,;t t
1.15104 +-s,@lpfx@,$lpfx,;t t
1.15105 +-s,@libm_machine_dir@,$libm_machine_dir,;t t
1.15106 +-s,@machine_dir@,$machine_dir,;t t
1.15107 +-s,@sys_dir@,$sys_dir,;t t
1.15108 +-s,@SED@,$SED,;t t
1.15109 +-s,@DLLTOOL@,$DLLTOOL,;t t
1.15110 +-s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t
1.15111 +-s,@OBJDUMP@,$OBJDUMP,;t t
1.15112 +-s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t
1.15113 +-s,@LIBTOOL@,$LIBTOOL,;t t
1.15114 +-s,@CFLAGS@,$CFLAGS,;t t
1.15115 +-s,@CPPFLAGS@,$CPPFLAGS,;t t
1.15116 +-s,@ac_ct_CC@,$ac_ct_CC,;t t
1.15117 +-s,@EXEEXT@,$EXEEXT,;t t
1.15118 +-s,@EGREP@,$EGREP,;t t
1.15119 +-s,@FGREP@,$FGREP,;t t
1.15120 +-s,@GREP@,$GREP,;t t
1.15121 +-s,@LD@,$LD,;t t
1.15122 +-s,@DUMPBIN@,$DUMPBIN,;t t
1.15123 +-s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t
1.15124 +-s,@NM@,$NM,;t t
1.15125 +-s,@LN_S@,$LN_S,;t t
1.15126 +-s,@lt_ECHO@,$lt_ECHO,;t t
1.15127 +-s,@DSYMUTIL@,$DSYMUTIL,;t t
1.15128 +-s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t
1.15129 +-s,@NMEDIT@,$NMEDIT,;t t
1.15130 +-s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t
1.15131 +-s,@LIPO@,$LIPO,;t t
1.15132 +-s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t
1.15133 +-s,@OTOOL@,$OTOOL,;t t
1.15134 +-s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t
1.15135 +-s,@OTOOL64@,$OTOOL64,;t t
1.15136 +-s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t
1.15137 +-s,@CPP@,$CPP,;t t
1.15138 +-s,@subdirs@,$subdirs,;t t
1.15139 +-s,@HAVE_MACHINE_DIR_TRUE@,$HAVE_MACHINE_DIR_TRUE,;t t
1.15140 +-s,@HAVE_MACHINE_DIR_FALSE@,$HAVE_MACHINE_DIR_FALSE,;t t
1.15141 +-s,@LIBOBJS@,$LIBOBJS,;t t
1.15142 +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
1.15143 +-CEOF
1.15144 +-
1.15145 +-_ACEOF
1.15146 +-
1.15147 +- cat >>$CONFIG_STATUS <<\_ACEOF
1.15148 +- # Split the substitutions into bite-sized pieces for seds with
1.15149 +- # small command number limits, like on Digital OSF/1 and HP-UX.
1.15150 +- ac_max_sed_lines=48
1.15151 +- ac_sed_frag=1 # Number of current file.
1.15152 +- ac_beg=1 # First line for current file.
1.15153 +- ac_end=$ac_max_sed_lines # Line after last line for current file.
1.15154 +- ac_more_lines=:
1.15155 +- ac_sed_cmds=
1.15156 +- while $ac_more_lines; do
1.15157 +- if test $ac_beg -gt 1; then
1.15158 +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
1.15159 +- else
1.15160 +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
1.15161 +- fi
1.15162 +- if test ! -s $tmp/subs.frag; then
1.15163 +- ac_more_lines=false
1.15164 +- else
1.15165 +- # The purpose of the label and of the branching condition is to
1.15166 +- # speed up the sed processing (if there are no `@' at all, there
1.15167 +- # is no need to browse any of the substitutions).
1.15168 +- # These are the two extra sed commands mentioned above.
1.15169 +- (echo ':t
1.15170 +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
1.15171 +- if test -z "$ac_sed_cmds"; then
1.15172 +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
1.15173 +- else
1.15174 +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
1.15175 +- fi
1.15176 +- ac_sed_frag=`expr $ac_sed_frag + 1`
1.15177 +- ac_beg=$ac_end
1.15178 +- ac_end=`expr $ac_end + $ac_max_sed_lines`
1.15179 +- fi
1.15180 +- done
1.15181 +- if test -z "$ac_sed_cmds"; then
1.15182 +- ac_sed_cmds=cat
1.15183 ++if test -n "$CONFIG_FILES"; then
1.15184 ++
1.15185 ++_ACEOF
1.15186 ++
1.15187 ++
1.15188 ++
1.15189 ++ac_delim='%!_!# '
1.15190 ++for ac_last_try in false false false false false :; do
1.15191 ++ cat >conf$$subs.sed <<_ACEOF
1.15192 ++SHELL!$SHELL$ac_delim
1.15193 ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
1.15194 ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim
1.15195 ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
1.15196 ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
1.15197 ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim
1.15198 ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
1.15199 ++exec_prefix!$exec_prefix$ac_delim
1.15200 ++prefix!$prefix$ac_delim
1.15201 ++program_transform_name!$program_transform_name$ac_delim
1.15202 ++bindir!$bindir$ac_delim
1.15203 ++sbindir!$sbindir$ac_delim
1.15204 ++libexecdir!$libexecdir$ac_delim
1.15205 ++datarootdir!$datarootdir$ac_delim
1.15206 ++datadir!$datadir$ac_delim
1.15207 ++sysconfdir!$sysconfdir$ac_delim
1.15208 ++sharedstatedir!$sharedstatedir$ac_delim
1.15209 ++localstatedir!$localstatedir$ac_delim
1.15210 ++includedir!$includedir$ac_delim
1.15211 ++oldincludedir!$oldincludedir$ac_delim
1.15212 ++docdir!$docdir$ac_delim
1.15213 ++infodir!$infodir$ac_delim
1.15214 ++htmldir!$htmldir$ac_delim
1.15215 ++dvidir!$dvidir$ac_delim
1.15216 ++pdfdir!$pdfdir$ac_delim
1.15217 ++psdir!$psdir$ac_delim
1.15218 ++libdir!$libdir$ac_delim
1.15219 ++localedir!$localedir$ac_delim
1.15220 ++mandir!$mandir$ac_delim
1.15221 ++DEFS!$DEFS$ac_delim
1.15222 ++ECHO_C!$ECHO_C$ac_delim
1.15223 ++ECHO_N!$ECHO_N$ac_delim
1.15224 ++ECHO_T!$ECHO_T$ac_delim
1.15225 ++LIBS!$LIBS$ac_delim
1.15226 ++build_alias!$build_alias$ac_delim
1.15227 ++host_alias!$host_alias$ac_delim
1.15228 ++target_alias!$target_alias$ac_delim
1.15229 ++MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim
1.15230 ++MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim
1.15231 ++newlib_basedir!$newlib_basedir$ac_delim
1.15232 ++build!$build$ac_delim
1.15233 ++build_cpu!$build_cpu$ac_delim
1.15234 ++build_vendor!$build_vendor$ac_delim
1.15235 ++build_os!$build_os$ac_delim
1.15236 ++host!$host$ac_delim
1.15237 ++host_cpu!$host_cpu$ac_delim
1.15238 ++host_vendor!$host_vendor$ac_delim
1.15239 ++host_os!$host_os$ac_delim
1.15240 ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
1.15241 ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
1.15242 ++INSTALL_DATA!$INSTALL_DATA$ac_delim
1.15243 ++CYGPATH_W!$CYGPATH_W$ac_delim
1.15244 ++PACKAGE!$PACKAGE$ac_delim
1.15245 ++VERSION!$VERSION$ac_delim
1.15246 ++ACLOCAL!$ACLOCAL$ac_delim
1.15247 ++AUTOCONF!$AUTOCONF$ac_delim
1.15248 ++AUTOMAKE!$AUTOMAKE$ac_delim
1.15249 ++AUTOHEADER!$AUTOHEADER$ac_delim
1.15250 ++MAKEINFO!$MAKEINFO$ac_delim
1.15251 ++install_sh!$install_sh$ac_delim
1.15252 ++STRIP!$STRIP$ac_delim
1.15253 ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
1.15254 ++mkdir_p!$mkdir_p$ac_delim
1.15255 ++AWK!$AWK$ac_delim
1.15256 ++SET_MAKE!$SET_MAKE$ac_delim
1.15257 ++am__leading_dot!$am__leading_dot$ac_delim
1.15258 ++AMTAR!$AMTAR$ac_delim
1.15259 ++am__tar!$am__tar$ac_delim
1.15260 ++am__untar!$am__untar$ac_delim
1.15261 ++CC!$CC$ac_delim
1.15262 ++DEPDIR!$DEPDIR$ac_delim
1.15263 ++am__include!$am__include$ac_delim
1.15264 ++am__quote!$am__quote$ac_delim
1.15265 ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim
1.15266 ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim
1.15267 ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
1.15268 ++CCDEPMODE!$CCDEPMODE$ac_delim
1.15269 ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
1.15270 ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
1.15271 ++AS!$AS$ac_delim
1.15272 ++AR!$AR$ac_delim
1.15273 ++RANLIB!$RANLIB$ac_delim
1.15274 ++READELF!$READELF$ac_delim
1.15275 ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
1.15276 ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
1.15277 ++MAINT!$MAINT$ac_delim
1.15278 ++CCAS!$CCAS$ac_delim
1.15279 ++CCASFLAGS!$CCASFLAGS$ac_delim
1.15280 ++NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim
1.15281 ++LDFLAGS!$LDFLAGS$ac_delim
1.15282 ++ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim
1.15283 ++ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim
1.15284 ++ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim
1.15285 ++ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim
1.15286 ++ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim
1.15287 ++ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim
1.15288 ++ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim
1.15289 ++_ACEOF
1.15290 ++
1.15291 ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
1.15292 ++ break
1.15293 ++ elif $ac_last_try; then
1.15294 ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
1.15295 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
1.15296 ++ { (exit 1); exit 1; }; }
1.15297 ++ else
1.15298 ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
1.15299 + fi
1.15300 +-fi # test -n "$CONFIG_FILES"
1.15301 ++done
1.15302 ++
1.15303 ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
1.15304 ++if test -n "$ac_eof"; then
1.15305 ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
1.15306 ++ ac_eof=`expr $ac_eof + 1`
1.15307 ++fi
1.15308 ++
1.15309 ++cat >>$CONFIG_STATUS <<_ACEOF
1.15310 ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
1.15311 ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
1.15312 ++_ACEOF
1.15313 ++sed '
1.15314 ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
1.15315 ++s/^/s,@/; s/!/@,|#_!!_#|/
1.15316 ++:n
1.15317 ++t n
1.15318 ++s/'"$ac_delim"'$/,g/; t
1.15319 ++s/$/\\/; p
1.15320 ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
1.15321 ++' >>$CONFIG_STATUS <conf$$subs.sed
1.15322 ++rm -f conf$$subs.sed
1.15323 ++cat >>$CONFIG_STATUS <<_ACEOF
1.15324 ++CEOF$ac_eof
1.15325 ++_ACEOF
1.15326 ++
1.15327 ++
1.15328 ++ac_delim='%!_!# '
1.15329 ++for ac_last_try in false false false false false :; do
1.15330 ++ cat >conf$$subs.sed <<_ACEOF
1.15331 ++ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim
1.15332 ++ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim
1.15333 ++ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim
1.15334 ++USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim
1.15335 ++USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim
1.15336 ++OBJEXT!$OBJEXT$ac_delim
1.15337 ++oext!$oext$ac_delim
1.15338 ++aext!$aext$ac_delim
1.15339 ++lpfx!$lpfx$ac_delim
1.15340 ++libm_machine_dir!$libm_machine_dir$ac_delim
1.15341 ++machine_dir!$machine_dir$ac_delim
1.15342 ++sys_dir!$sys_dir$ac_delim
1.15343 ++SED!$SED$ac_delim
1.15344 ++DLLTOOL!$DLLTOOL$ac_delim
1.15345 ++OBJDUMP!$OBJDUMP$ac_delim
1.15346 ++LIBTOOL!$LIBTOOL$ac_delim
1.15347 ++CFLAGS!$CFLAGS$ac_delim
1.15348 ++CPPFLAGS!$CPPFLAGS$ac_delim
1.15349 ++ac_ct_CC!$ac_ct_CC$ac_delim
1.15350 ++EXEEXT!$EXEEXT$ac_delim
1.15351 ++GREP!$GREP$ac_delim
1.15352 ++EGREP!$EGREP$ac_delim
1.15353 ++FGREP!$FGREP$ac_delim
1.15354 ++LD!$LD$ac_delim
1.15355 ++DUMPBIN!$DUMPBIN$ac_delim
1.15356 ++ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim
1.15357 ++NM!$NM$ac_delim
1.15358 ++LN_S!$LN_S$ac_delim
1.15359 ++lt_ECHO!$lt_ECHO$ac_delim
1.15360 ++DSYMUTIL!$DSYMUTIL$ac_delim
1.15361 ++NMEDIT!$NMEDIT$ac_delim
1.15362 ++LIPO!$LIPO$ac_delim
1.15363 ++OTOOL!$OTOOL$ac_delim
1.15364 ++OTOOL64!$OTOOL64$ac_delim
1.15365 ++CPP!$CPP$ac_delim
1.15366 ++subdirs!$subdirs$ac_delim
1.15367 ++HAVE_MACHINE_DIR_TRUE!$HAVE_MACHINE_DIR_TRUE$ac_delim
1.15368 ++HAVE_MACHINE_DIR_FALSE!$HAVE_MACHINE_DIR_FALSE$ac_delim
1.15369 ++LIBOBJS!$LIBOBJS$ac_delim
1.15370 ++LTLIBOBJS!$LTLIBOBJS$ac_delim
1.15371 ++_ACEOF
1.15372 ++
1.15373 ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 40; then
1.15374 ++ break
1.15375 ++ elif $ac_last_try; then
1.15376 ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
1.15377 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
1.15378 ++ { (exit 1); exit 1; }; }
1.15379 ++ else
1.15380 ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
1.15381 ++ fi
1.15382 ++done
1.15383 ++
1.15384 ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
1.15385 ++if test -n "$ac_eof"; then
1.15386 ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
1.15387 ++ ac_eof=`expr $ac_eof + 1`
1.15388 ++fi
1.15389 +
1.15390 ++cat >>$CONFIG_STATUS <<_ACEOF
1.15391 ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
1.15392 ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
1.15393 ++_ACEOF
1.15394 ++sed '
1.15395 ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
1.15396 ++s/^/s,@/; s/!/@,|#_!!_#|/
1.15397 ++:n
1.15398 ++t n
1.15399 ++s/'"$ac_delim"'$/,g/; t
1.15400 ++s/$/\\/; p
1.15401 ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
1.15402 ++' >>$CONFIG_STATUS <conf$$subs.sed
1.15403 ++rm -f conf$$subs.sed
1.15404 ++cat >>$CONFIG_STATUS <<_ACEOF
1.15405 ++:end
1.15406 ++s/|#_!!_#|//g
1.15407 ++CEOF$ac_eof
1.15408 + _ACEOF
1.15409 ++
1.15410 ++
1.15411 ++# VPATH may cause trouble with some makes, so we remove $(srcdir),
1.15412 ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1.15413 ++# trailing colons and then remove the whole line if VPATH becomes empty
1.15414 ++# (actually we leave an empty line to preserve line numbers).
1.15415 ++if test "x$srcdir" = x.; then
1.15416 ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
1.15417 ++s/:*\$(srcdir):*/:/
1.15418 ++s/:*\${srcdir}:*/:/
1.15419 ++s/:*@srcdir@:*/:/
1.15420 ++s/^\([^=]*=[ ]*\):*/\1/
1.15421 ++s/:*$//
1.15422 ++s/^[^=]*=[ ]*$//
1.15423 ++}'
1.15424 ++fi
1.15425 ++
1.15426 + cat >>$CONFIG_STATUS <<\_ACEOF
1.15427 +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
1.15428 +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
1.15429 +- case $ac_file in
1.15430 +- - | *:- | *:-:* ) # input from stdin
1.15431 +- cat >$tmp/stdin
1.15432 +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
1.15433 +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
1.15434 +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
1.15435 +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
1.15436 +- * ) ac_file_in=$ac_file.in ;;
1.15437 ++fi # test -n "$CONFIG_FILES"
1.15438 ++
1.15439 ++
1.15440 ++for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS
1.15441 ++do
1.15442 ++ case $ac_tag in
1.15443 ++ :[FHLC]) ac_mode=$ac_tag; continue;;
1.15444 ++ esac
1.15445 ++ case $ac_mode$ac_tag in
1.15446 ++ :[FHL]*:*);;
1.15447 ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
1.15448 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;}
1.15449 ++ { (exit 1); exit 1; }; };;
1.15450 ++ :[FH]-) ac_tag=-:-;;
1.15451 ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
1.15452 ++ esac
1.15453 ++ ac_save_IFS=$IFS
1.15454 ++ IFS=:
1.15455 ++ set x $ac_tag
1.15456 ++ IFS=$ac_save_IFS
1.15457 ++ shift
1.15458 ++ ac_file=$1
1.15459 ++ shift
1.15460 ++
1.15461 ++ case $ac_mode in
1.15462 ++ :L) ac_source=$1;;
1.15463 ++ :[FH])
1.15464 ++ ac_file_inputs=
1.15465 ++ for ac_f
1.15466 ++ do
1.15467 ++ case $ac_f in
1.15468 ++ -) ac_f="$tmp/stdin";;
1.15469 ++ *) # Look for the file first in the build tree, then in the source tree
1.15470 ++ # (if the path is not absolute). The absolute path cannot be DOS-style,
1.15471 ++ # because $ac_f cannot contain `:'.
1.15472 ++ test -f "$ac_f" ||
1.15473 ++ case $ac_f in
1.15474 ++ [\\/$]*) false;;
1.15475 ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
1.15476 ++ esac ||
1.15477 ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
1.15478 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;}
1.15479 ++ { (exit 1); exit 1; }; };;
1.15480 ++ esac
1.15481 ++ ac_file_inputs="$ac_file_inputs $ac_f"
1.15482 ++ done
1.15483 ++
1.15484 ++ # Let's still pretend it is `configure' which instantiates (i.e., don't
1.15485 ++ # use $as_me), people would be surprised to read:
1.15486 ++ # /* config.h. Generated by config.status. */
1.15487 ++ configure_input="Generated from "`IFS=:
1.15488 ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
1.15489 ++ if test x"$ac_file" != x-; then
1.15490 ++ configure_input="$ac_file. $configure_input"
1.15491 ++ { echo "$as_me:$LINENO: creating $ac_file" >&5
1.15492 ++echo "$as_me: creating $ac_file" >&6;}
1.15493 ++ fi
1.15494 ++
1.15495 ++ case $ac_tag in
1.15496 ++ *:-:* | *:-) cat >"$tmp/stdin";;
1.15497 ++ esac
1.15498 ++ ;;
1.15499 + esac
1.15500 +
1.15501 +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
1.15502 +- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
1.15503 ++ ac_dir=`$as_dirname -- "$ac_file" ||
1.15504 + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.15505 + X"$ac_file" : 'X\(//\)[^/]' \| \
1.15506 + X"$ac_file" : 'X\(//\)$' \| \
1.15507 +- X"$ac_file" : 'X\(/\)' \| \
1.15508 +- . : '\(.\)' 2>/dev/null ||
1.15509 ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
1.15510 + echo X"$ac_file" |
1.15511 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.15512 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.15513 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.15514 +- /^X\(\/\).*/{ s//\1/; q; }
1.15515 +- s/.*/./; q'`
1.15516 +- { if $as_mkdir_p; then
1.15517 +- mkdir -p "$ac_dir"
1.15518 +- else
1.15519 +- as_dir="$ac_dir"
1.15520 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.15521 ++ s//\1/
1.15522 ++ q
1.15523 ++ }
1.15524 ++ /^X\(\/\/\)[^/].*/{
1.15525 ++ s//\1/
1.15526 ++ q
1.15527 ++ }
1.15528 ++ /^X\(\/\/\)$/{
1.15529 ++ s//\1/
1.15530 ++ q
1.15531 ++ }
1.15532 ++ /^X\(\/\).*/{
1.15533 ++ s//\1/
1.15534 ++ q
1.15535 ++ }
1.15536 ++ s/.*/./; q'`
1.15537 ++ { as_dir="$ac_dir"
1.15538 ++ case $as_dir in #(
1.15539 ++ -*) as_dir=./$as_dir;;
1.15540 ++ esac
1.15541 ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
1.15542 + as_dirs=
1.15543 +- while test ! -d "$as_dir"; do
1.15544 +- as_dirs="$as_dir $as_dirs"
1.15545 +- as_dir=`(dirname "$as_dir") 2>/dev/null ||
1.15546 ++ while :; do
1.15547 ++ case $as_dir in #(
1.15548 ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
1.15549 ++ *) as_qdir=$as_dir;;
1.15550 ++ esac
1.15551 ++ as_dirs="'$as_qdir' $as_dirs"
1.15552 ++ as_dir=`$as_dirname -- "$as_dir" ||
1.15553 + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.15554 + X"$as_dir" : 'X\(//\)[^/]' \| \
1.15555 + X"$as_dir" : 'X\(//\)$' \| \
1.15556 +- X"$as_dir" : 'X\(/\)' \| \
1.15557 +- . : '\(.\)' 2>/dev/null ||
1.15558 ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
1.15559 + echo X"$as_dir" |
1.15560 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.15561 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.15562 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.15563 +- /^X\(\/\).*/{ s//\1/; q; }
1.15564 +- s/.*/./; q'`
1.15565 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.15566 ++ s//\1/
1.15567 ++ q
1.15568 ++ }
1.15569 ++ /^X\(\/\/\)[^/].*/{
1.15570 ++ s//\1/
1.15571 ++ q
1.15572 ++ }
1.15573 ++ /^X\(\/\/\)$/{
1.15574 ++ s//\1/
1.15575 ++ q
1.15576 ++ }
1.15577 ++ /^X\(\/\).*/{
1.15578 ++ s//\1/
1.15579 ++ q
1.15580 ++ }
1.15581 ++ s/.*/./; q'`
1.15582 ++ test -d "$as_dir" && break
1.15583 + done
1.15584 +- test ! -n "$as_dirs" || mkdir $as_dirs
1.15585 +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
1.15586 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
1.15587 ++ test -z "$as_dirs" || eval "mkdir $as_dirs"
1.15588 ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
1.15589 ++echo "$as_me: error: cannot create directory $as_dir" >&2;}
1.15590 + { (exit 1); exit 1; }; }; }
1.15591 +-
1.15592 + ac_builddir=.
1.15593 +
1.15594 +-if test "$ac_dir" != .; then
1.15595 ++case "$ac_dir" in
1.15596 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.15597 ++*)
1.15598 + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.15599 +- # A "../" for each directory in $ac_dir_suffix.
1.15600 +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1.15601 +-else
1.15602 +- ac_dir_suffix= ac_top_builddir=
1.15603 +-fi
1.15604 ++ # A ".." for each directory in $ac_dir_suffix.
1.15605 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.15606 ++ case $ac_top_builddir_sub in
1.15607 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.15608 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.15609 ++ esac ;;
1.15610 ++esac
1.15611 ++ac_abs_top_builddir=$ac_pwd
1.15612 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.15613 ++# for backward compatibility:
1.15614 ++ac_top_builddir=$ac_top_build_prefix
1.15615 +
1.15616 + case $srcdir in
1.15617 +- .) # No --srcdir option. We are building in place.
1.15618 ++ .) # We are building in place.
1.15619 + ac_srcdir=.
1.15620 +- if test -z "$ac_top_builddir"; then
1.15621 +- ac_top_srcdir=.
1.15622 +- else
1.15623 +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1.15624 +- fi ;;
1.15625 +- [\\/]* | ?:[\\/]* ) # Absolute path.
1.15626 ++ ac_top_srcdir=$ac_top_builddir_sub
1.15627 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.15628 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.15629 + ac_srcdir=$srcdir$ac_dir_suffix;
1.15630 +- ac_top_srcdir=$srcdir ;;
1.15631 +- *) # Relative path.
1.15632 +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1.15633 +- ac_top_srcdir=$ac_top_builddir$srcdir ;;
1.15634 +-esac
1.15635 ++ ac_top_srcdir=$srcdir
1.15636 ++ ac_abs_top_srcdir=$srcdir ;;
1.15637 ++ *) # Relative name.
1.15638 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.15639 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.15640 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.15641 ++esac
1.15642 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.15643 +
1.15644 +-# Do not use `cd foo && pwd` to compute absolute paths, because
1.15645 +-# the directories may not exist.
1.15646 +-case `pwd` in
1.15647 +-.) ac_abs_builddir="$ac_dir";;
1.15648 +-*)
1.15649 +- case "$ac_dir" in
1.15650 +- .) ac_abs_builddir=`pwd`;;
1.15651 +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
1.15652 +- *) ac_abs_builddir=`pwd`/"$ac_dir";;
1.15653 +- esac;;
1.15654 +-esac
1.15655 +-case $ac_abs_builddir in
1.15656 +-.) ac_abs_top_builddir=${ac_top_builddir}.;;
1.15657 +-*)
1.15658 +- case ${ac_top_builddir}. in
1.15659 +- .) ac_abs_top_builddir=$ac_abs_builddir;;
1.15660 +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
1.15661 +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
1.15662 +- esac;;
1.15663 +-esac
1.15664 +-case $ac_abs_builddir in
1.15665 +-.) ac_abs_srcdir=$ac_srcdir;;
1.15666 +-*)
1.15667 +- case $ac_srcdir in
1.15668 +- .) ac_abs_srcdir=$ac_abs_builddir;;
1.15669 +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
1.15670 +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
1.15671 +- esac;;
1.15672 +-esac
1.15673 +-case $ac_abs_builddir in
1.15674 +-.) ac_abs_top_srcdir=$ac_top_srcdir;;
1.15675 +-*)
1.15676 +- case $ac_top_srcdir in
1.15677 +- .) ac_abs_top_srcdir=$ac_abs_builddir;;
1.15678 +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
1.15679 +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
1.15680 +- esac;;
1.15681 +-esac
1.15682 +
1.15683 ++ case $ac_mode in
1.15684 ++ :F)
1.15685 ++ #
1.15686 ++ # CONFIG_FILE
1.15687 ++ #
1.15688 +
1.15689 + case $INSTALL in
1.15690 + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
1.15691 +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
1.15692 ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
1.15693 + esac
1.15694 ++_ACEOF
1.15695 +
1.15696 +- if test x"$ac_file" != x-; then
1.15697 +- { echo "$as_me:$LINENO: creating $ac_file" >&5
1.15698 +-echo "$as_me: creating $ac_file" >&6;}
1.15699 +- rm -f "$ac_file"
1.15700 +- fi
1.15701 +- # Let's still pretend it is `configure' which instantiates (i.e., don't
1.15702 +- # use $as_me), people would be surprised to read:
1.15703 +- # /* config.h. Generated by config.status. */
1.15704 +- if test x"$ac_file" = x-; then
1.15705 +- configure_input=
1.15706 +- else
1.15707 +- configure_input="$ac_file. "
1.15708 +- fi
1.15709 +- configure_input=$configure_input"Generated from `echo $ac_file_in |
1.15710 +- sed 's,.*/,,'` by configure."
1.15711 +-
1.15712 +- # First look for the input files in the build tree, otherwise in the
1.15713 +- # src tree.
1.15714 +- ac_file_inputs=`IFS=:
1.15715 +- for f in $ac_file_in; do
1.15716 +- case $f in
1.15717 +- -) echo $tmp/stdin ;;
1.15718 +- [\\/$]*)
1.15719 +- # Absolute (can't be DOS-style, as IFS=:)
1.15720 +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
1.15721 +-echo "$as_me: error: cannot find input file: $f" >&2;}
1.15722 +- { (exit 1); exit 1; }; }
1.15723 +- echo "$f";;
1.15724 +- *) # Relative
1.15725 +- if test -f "$f"; then
1.15726 +- # Build tree
1.15727 +- echo "$f"
1.15728 +- elif test -f "$srcdir/$f"; then
1.15729 +- # Source tree
1.15730 +- echo "$srcdir/$f"
1.15731 +- else
1.15732 +- # /dev/null tree
1.15733 +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
1.15734 +-echo "$as_me: error: cannot find input file: $f" >&2;}
1.15735 +- { (exit 1); exit 1; }; }
1.15736 +- fi;;
1.15737 +- esac
1.15738 +- done` || { (exit 1); exit 1; }
1.15739 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.15740 ++# If the template does not know about datarootdir, expand it.
1.15741 ++# FIXME: This hack should be removed a few years after 2.60.
1.15742 ++ac_datarootdir_hack=; ac_datarootdir_seen=
1.15743 ++
1.15744 ++case `sed -n '/datarootdir/ {
1.15745 ++ p
1.15746 ++ q
1.15747 ++}
1.15748 ++/@datadir@/p
1.15749 ++/@docdir@/p
1.15750 ++/@infodir@/p
1.15751 ++/@localedir@/p
1.15752 ++/@mandir@/p
1.15753 ++' $ac_file_inputs` in
1.15754 ++*datarootdir*) ac_datarootdir_seen=yes;;
1.15755 ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
1.15756 ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
1.15757 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
1.15758 ++_ACEOF
1.15759 ++cat >>$CONFIG_STATUS <<_ACEOF
1.15760 ++ ac_datarootdir_hack='
1.15761 ++ s&@datadir@&$datadir&g
1.15762 ++ s&@docdir@&$docdir&g
1.15763 ++ s&@infodir@&$infodir&g
1.15764 ++ s&@localedir@&$localedir&g
1.15765 ++ s&@mandir@&$mandir&g
1.15766 ++ s&\\\${datarootdir}&$datarootdir&g' ;;
1.15767 ++esac
1.15768 + _ACEOF
1.15769 ++
1.15770 ++# Neutralize VPATH when `$srcdir' = `.'.
1.15771 ++# Shell code in configure.ac might set extrasub.
1.15772 ++# FIXME: do we really want to maintain this feature?
1.15773 + cat >>$CONFIG_STATUS <<_ACEOF
1.15774 + sed "$ac_vpsub
1.15775 + $extrasub
1.15776 +@@ -12859,142 +13973,43 @@
1.15777 + cat >>$CONFIG_STATUS <<\_ACEOF
1.15778 + :t
1.15779 + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
1.15780 +-s,@configure_input@,$configure_input,;t t
1.15781 +-s,@srcdir@,$ac_srcdir,;t t
1.15782 +-s,@abs_srcdir@,$ac_abs_srcdir,;t t
1.15783 +-s,@top_srcdir@,$ac_top_srcdir,;t t
1.15784 +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
1.15785 +-s,@builddir@,$ac_builddir,;t t
1.15786 +-s,@abs_builddir@,$ac_abs_builddir,;t t
1.15787 +-s,@top_builddir@,$ac_top_builddir,;t t
1.15788 +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
1.15789 +-s,@INSTALL@,$ac_INSTALL,;t t
1.15790 +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
1.15791 +- rm -f $tmp/stdin
1.15792 +- if test x"$ac_file" != x-; then
1.15793 +- mv $tmp/out $ac_file
1.15794 +- else
1.15795 +- cat $tmp/out
1.15796 +- rm -f $tmp/out
1.15797 +- fi
1.15798 +-
1.15799 +-done
1.15800 +-_ACEOF
1.15801 +-cat >>$CONFIG_STATUS <<\_ACEOF
1.15802 +-
1.15803 +-#
1.15804 +-# CONFIG_COMMANDS section.
1.15805 +-#
1.15806 +-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
1.15807 +- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
1.15808 +- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
1.15809 +- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
1.15810 +-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.15811 +- X"$ac_dest" : 'X\(//\)[^/]' \| \
1.15812 +- X"$ac_dest" : 'X\(//\)$' \| \
1.15813 +- X"$ac_dest" : 'X\(/\)' \| \
1.15814 +- . : '\(.\)' 2>/dev/null ||
1.15815 +-echo X"$ac_dest" |
1.15816 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.15817 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.15818 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.15819 +- /^X\(\/\).*/{ s//\1/; q; }
1.15820 +- s/.*/./; q'`
1.15821 +- { if $as_mkdir_p; then
1.15822 +- mkdir -p "$ac_dir"
1.15823 +- else
1.15824 +- as_dir="$ac_dir"
1.15825 +- as_dirs=
1.15826 +- while test ! -d "$as_dir"; do
1.15827 +- as_dirs="$as_dir $as_dirs"
1.15828 +- as_dir=`(dirname "$as_dir") 2>/dev/null ||
1.15829 +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.15830 +- X"$as_dir" : 'X\(//\)[^/]' \| \
1.15831 +- X"$as_dir" : 'X\(//\)$' \| \
1.15832 +- X"$as_dir" : 'X\(/\)' \| \
1.15833 +- . : '\(.\)' 2>/dev/null ||
1.15834 +-echo X"$as_dir" |
1.15835 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.15836 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.15837 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.15838 +- /^X\(\/\).*/{ s//\1/; q; }
1.15839 +- s/.*/./; q'`
1.15840 +- done
1.15841 +- test ! -n "$as_dirs" || mkdir $as_dirs
1.15842 +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
1.15843 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
1.15844 +- { (exit 1); exit 1; }; }; }
1.15845 ++s&@configure_input@&$configure_input&;t t
1.15846 ++s&@top_builddir@&$ac_top_builddir_sub&;t t
1.15847 ++s&@srcdir@&$ac_srcdir&;t t
1.15848 ++s&@abs_srcdir@&$ac_abs_srcdir&;t t
1.15849 ++s&@top_srcdir@&$ac_top_srcdir&;t t
1.15850 ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
1.15851 ++s&@builddir@&$ac_builddir&;t t
1.15852 ++s&@abs_builddir@&$ac_abs_builddir&;t t
1.15853 ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
1.15854 ++s&@INSTALL@&$ac_INSTALL&;t t
1.15855 ++$ac_datarootdir_hack
1.15856 ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
1.15857 ++
1.15858 ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
1.15859 ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
1.15860 ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
1.15861 ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
1.15862 ++which seems to be undefined. Please make sure it is defined." >&5
1.15863 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
1.15864 ++which seems to be undefined. Please make sure it is defined." >&2;}
1.15865 +
1.15866 +- ac_builddir=.
1.15867 +-
1.15868 +-if test "$ac_dir" != .; then
1.15869 +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.15870 +- # A "../" for each directory in $ac_dir_suffix.
1.15871 +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1.15872 +-else
1.15873 +- ac_dir_suffix= ac_top_builddir=
1.15874 +-fi
1.15875 ++ rm -f "$tmp/stdin"
1.15876 ++ case $ac_file in
1.15877 ++ -) cat "$tmp/out"; rm -f "$tmp/out";;
1.15878 ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
1.15879 ++ esac
1.15880 ++ ;;
1.15881 +
1.15882 +-case $srcdir in
1.15883 +- .) # No --srcdir option. We are building in place.
1.15884 +- ac_srcdir=.
1.15885 +- if test -z "$ac_top_builddir"; then
1.15886 +- ac_top_srcdir=.
1.15887 +- else
1.15888 +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1.15889 +- fi ;;
1.15890 +- [\\/]* | ?:[\\/]* ) # Absolute path.
1.15891 +- ac_srcdir=$srcdir$ac_dir_suffix;
1.15892 +- ac_top_srcdir=$srcdir ;;
1.15893 +- *) # Relative path.
1.15894 +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1.15895 +- ac_top_srcdir=$ac_top_builddir$srcdir ;;
1.15896 +-esac
1.15897 +
1.15898 +-# Do not use `cd foo && pwd` to compute absolute paths, because
1.15899 +-# the directories may not exist.
1.15900 +-case `pwd` in
1.15901 +-.) ac_abs_builddir="$ac_dir";;
1.15902 +-*)
1.15903 +- case "$ac_dir" in
1.15904 +- .) ac_abs_builddir=`pwd`;;
1.15905 +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
1.15906 +- *) ac_abs_builddir=`pwd`/"$ac_dir";;
1.15907 +- esac;;
1.15908 +-esac
1.15909 +-case $ac_abs_builddir in
1.15910 +-.) ac_abs_top_builddir=${ac_top_builddir}.;;
1.15911 +-*)
1.15912 +- case ${ac_top_builddir}. in
1.15913 +- .) ac_abs_top_builddir=$ac_abs_builddir;;
1.15914 +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
1.15915 +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
1.15916 +- esac;;
1.15917 +-esac
1.15918 +-case $ac_abs_builddir in
1.15919 +-.) ac_abs_srcdir=$ac_srcdir;;
1.15920 +-*)
1.15921 +- case $ac_srcdir in
1.15922 +- .) ac_abs_srcdir=$ac_abs_builddir;;
1.15923 +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
1.15924 +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
1.15925 +- esac;;
1.15926 +-esac
1.15927 +-case $ac_abs_builddir in
1.15928 +-.) ac_abs_top_srcdir=$ac_top_srcdir;;
1.15929 +-*)
1.15930 +- case $ac_top_srcdir in
1.15931 +- .) ac_abs_top_srcdir=$ac_abs_builddir;;
1.15932 +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
1.15933 +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
1.15934 +- esac;;
1.15935 +-esac
1.15936 ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
1.15937 ++echo "$as_me: executing $ac_file commands" >&6;}
1.15938 ++ ;;
1.15939 ++ esac
1.15940 +
1.15941 +
1.15942 +- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
1.15943 +-echo "$as_me: executing $ac_dest commands" >&6;}
1.15944 +- case $ac_dest in
1.15945 +- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
1.15946 ++ case $ac_file$ac_mode in
1.15947 ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
1.15948 + # Strip MF so we end up with the name of the file.
1.15949 + mf=`echo "$mf" | sed -e 's/:.*$//'`
1.15950 + # Check whether this is an Automake generated Makefile or not.
1.15951 +@@ -13004,18 +14019,29 @@
1.15952 + # each Makefile.in and add a new line on top of each file to say so.
1.15953 + # So let's grep whole file.
1.15954 + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
1.15955 +- dirpart=`(dirname "$mf") 2>/dev/null ||
1.15956 ++ dirpart=`$as_dirname -- "$mf" ||
1.15957 + $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.15958 + X"$mf" : 'X\(//\)[^/]' \| \
1.15959 + X"$mf" : 'X\(//\)$' \| \
1.15960 +- X"$mf" : 'X\(/\)' \| \
1.15961 +- . : '\(.\)' 2>/dev/null ||
1.15962 ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
1.15963 + echo X"$mf" |
1.15964 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.15965 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.15966 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.15967 +- /^X\(\/\).*/{ s//\1/; q; }
1.15968 +- s/.*/./; q'`
1.15969 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.15970 ++ s//\1/
1.15971 ++ q
1.15972 ++ }
1.15973 ++ /^X\(\/\/\)[^/].*/{
1.15974 ++ s//\1/
1.15975 ++ q
1.15976 ++ }
1.15977 ++ /^X\(\/\/\)$/{
1.15978 ++ s//\1/
1.15979 ++ q
1.15980 ++ }
1.15981 ++ /^X\(\/\).*/{
1.15982 ++ s//\1/
1.15983 ++ q
1.15984 ++ }
1.15985 ++ s/.*/./; q'`
1.15986 + else
1.15987 + continue
1.15988 + fi
1.15989 +@@ -13037,49 +14063,76 @@
1.15990 + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
1.15991 + # Make sure the directory exists.
1.15992 + test -f "$dirpart/$file" && continue
1.15993 +- fdir=`(dirname "$file") 2>/dev/null ||
1.15994 ++ fdir=`$as_dirname -- "$file" ||
1.15995 + $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.15996 + X"$file" : 'X\(//\)[^/]' \| \
1.15997 + X"$file" : 'X\(//\)$' \| \
1.15998 +- X"$file" : 'X\(/\)' \| \
1.15999 +- . : '\(.\)' 2>/dev/null ||
1.16000 ++ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
1.16001 + echo X"$file" |
1.16002 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.16003 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.16004 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.16005 +- /^X\(\/\).*/{ s//\1/; q; }
1.16006 +- s/.*/./; q'`
1.16007 +- { if $as_mkdir_p; then
1.16008 +- mkdir -p $dirpart/$fdir
1.16009 +- else
1.16010 +- as_dir=$dirpart/$fdir
1.16011 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.16012 ++ s//\1/
1.16013 ++ q
1.16014 ++ }
1.16015 ++ /^X\(\/\/\)[^/].*/{
1.16016 ++ s//\1/
1.16017 ++ q
1.16018 ++ }
1.16019 ++ /^X\(\/\/\)$/{
1.16020 ++ s//\1/
1.16021 ++ q
1.16022 ++ }
1.16023 ++ /^X\(\/\).*/{
1.16024 ++ s//\1/
1.16025 ++ q
1.16026 ++ }
1.16027 ++ s/.*/./; q'`
1.16028 ++ { as_dir=$dirpart/$fdir
1.16029 ++ case $as_dir in #(
1.16030 ++ -*) as_dir=./$as_dir;;
1.16031 ++ esac
1.16032 ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
1.16033 + as_dirs=
1.16034 +- while test ! -d "$as_dir"; do
1.16035 +- as_dirs="$as_dir $as_dirs"
1.16036 +- as_dir=`(dirname "$as_dir") 2>/dev/null ||
1.16037 ++ while :; do
1.16038 ++ case $as_dir in #(
1.16039 ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
1.16040 ++ *) as_qdir=$as_dir;;
1.16041 ++ esac
1.16042 ++ as_dirs="'$as_qdir' $as_dirs"
1.16043 ++ as_dir=`$as_dirname -- "$as_dir" ||
1.16044 + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.16045 + X"$as_dir" : 'X\(//\)[^/]' \| \
1.16046 + X"$as_dir" : 'X\(//\)$' \| \
1.16047 +- X"$as_dir" : 'X\(/\)' \| \
1.16048 +- . : '\(.\)' 2>/dev/null ||
1.16049 ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
1.16050 + echo X"$as_dir" |
1.16051 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.16052 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.16053 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.16054 +- /^X\(\/\).*/{ s//\1/; q; }
1.16055 +- s/.*/./; q'`
1.16056 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.16057 ++ s//\1/
1.16058 ++ q
1.16059 ++ }
1.16060 ++ /^X\(\/\/\)[^/].*/{
1.16061 ++ s//\1/
1.16062 ++ q
1.16063 ++ }
1.16064 ++ /^X\(\/\/\)$/{
1.16065 ++ s//\1/
1.16066 ++ q
1.16067 ++ }
1.16068 ++ /^X\(\/\).*/{
1.16069 ++ s//\1/
1.16070 ++ q
1.16071 ++ }
1.16072 ++ s/.*/./; q'`
1.16073 ++ test -d "$as_dir" && break
1.16074 + done
1.16075 +- test ! -n "$as_dirs" || mkdir $as_dirs
1.16076 +- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
1.16077 +-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
1.16078 ++ test -z "$as_dirs" || eval "mkdir $as_dirs"
1.16079 ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
1.16080 ++echo "$as_me: error: cannot create directory $as_dir" >&2;}
1.16081 + { (exit 1); exit 1; }; }; }
1.16082 +-
1.16083 + # echo "creating $dirpart/$file"
1.16084 + echo '# dummy' > "$dirpart/$file"
1.16085 + done
1.16086 + done
1.16087 + ;;
1.16088 +- libtool )
1.16089 ++ "libtool":C)
1.16090 +
1.16091 + # See if we are running on zsh, and set the options which allow our
1.16092 + # commands through without removal of \ escapes.
1.16093 +@@ -13720,11 +14773,10 @@
1.16094 + chmod +x "$ofile"
1.16095 +
1.16096 + ;;
1.16097 ++
1.16098 + esac
1.16099 +-done
1.16100 +-_ACEOF
1.16101 ++done # for ac_tag
1.16102 +
1.16103 +-cat >>$CONFIG_STATUS <<\_ACEOF
1.16104 +
1.16105 + { (exit 0); exit 0; }
1.16106 + _ACEOF
1.16107 +@@ -13754,7 +14806,7 @@
1.16108 + fi
1.16109 +
1.16110 + #
1.16111 +-# CONFIG_SUBDIRS section, as fixed in confsubdir.m4.
1.16112 ++# CONFIG_SUBDIRS section.
1.16113 + #
1.16114 + if test "$no_recursion" != yes; then
1.16115 +
1.16116 +@@ -13801,7 +14853,12 @@
1.16117 + case $ac_arg in
1.16118 + *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
1.16119 + esac
1.16120 +- ac_sub_configure_args="$ac_arg $ac_sub_configure_args"
1.16121 ++ ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
1.16122 ++
1.16123 ++ # Pass --silent
1.16124 ++ if test "$silent" = yes; then
1.16125 ++ ac_sub_configure_args="--silent $ac_sub_configure_args"
1.16126 ++ fi
1.16127 +
1.16128 + ac_popdir=`pwd`
1.16129 + for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
1.16130 +@@ -13810,97 +14867,83 @@
1.16131 + # parts of a large source tree are present.
1.16132 + test -d "$srcdir/$ac_dir" || continue
1.16133 +
1.16134 +- { echo "$as_me:$LINENO: configuring in $ac_dir" >&5
1.16135 +-echo "$as_me: configuring in $ac_dir" >&6;}
1.16136 +- { if $as_mkdir_p; then
1.16137 +- mkdir -p "$ac_dir"
1.16138 +- else
1.16139 +- as_dir="$ac_dir"
1.16140 ++ ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
1.16141 ++ echo "$as_me:$LINENO: $ac_msg" >&5
1.16142 ++ echo "$ac_msg" >&6
1.16143 ++ { as_dir="$ac_dir"
1.16144 ++ case $as_dir in #(
1.16145 ++ -*) as_dir=./$as_dir;;
1.16146 ++ esac
1.16147 ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
1.16148 + as_dirs=
1.16149 +- while test ! -d "$as_dir"; do
1.16150 +- as_dirs="$as_dir $as_dirs"
1.16151 +- as_dir=`(dirname "$as_dir") 2>/dev/null ||
1.16152 ++ while :; do
1.16153 ++ case $as_dir in #(
1.16154 ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
1.16155 ++ *) as_qdir=$as_dir;;
1.16156 ++ esac
1.16157 ++ as_dirs="'$as_qdir' $as_dirs"
1.16158 ++ as_dir=`$as_dirname -- "$as_dir" ||
1.16159 + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.16160 + X"$as_dir" : 'X\(//\)[^/]' \| \
1.16161 + X"$as_dir" : 'X\(//\)$' \| \
1.16162 +- X"$as_dir" : 'X\(/\)' \| \
1.16163 +- . : '\(.\)' 2>/dev/null ||
1.16164 ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
1.16165 + echo X"$as_dir" |
1.16166 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.16167 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.16168 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.16169 +- /^X\(\/\).*/{ s//\1/; q; }
1.16170 +- s/.*/./; q'`
1.16171 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.16172 ++ s//\1/
1.16173 ++ q
1.16174 ++ }
1.16175 ++ /^X\(\/\/\)[^/].*/{
1.16176 ++ s//\1/
1.16177 ++ q
1.16178 ++ }
1.16179 ++ /^X\(\/\/\)$/{
1.16180 ++ s//\1/
1.16181 ++ q
1.16182 ++ }
1.16183 ++ /^X\(\/\).*/{
1.16184 ++ s//\1/
1.16185 ++ q
1.16186 ++ }
1.16187 ++ s/.*/./; q'`
1.16188 ++ test -d "$as_dir" && break
1.16189 + done
1.16190 +- test ! -n "$as_dirs" || mkdir $as_dirs
1.16191 +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
1.16192 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
1.16193 ++ test -z "$as_dirs" || eval "mkdir $as_dirs"
1.16194 ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
1.16195 ++echo "$as_me: error: cannot create directory $as_dir" >&2;}
1.16196 + { (exit 1); exit 1; }; }; }
1.16197 +-
1.16198 + ac_builddir=.
1.16199 +
1.16200 +-if test "$ac_dir" != .; then
1.16201 ++case "$ac_dir" in
1.16202 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.16203 ++*)
1.16204 + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.16205 +- # A "../" for each directory in $ac_dir_suffix.
1.16206 +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1.16207 +-else
1.16208 +- ac_dir_suffix= ac_top_builddir=
1.16209 +-fi
1.16210 ++ # A ".." for each directory in $ac_dir_suffix.
1.16211 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.16212 ++ case $ac_top_builddir_sub in
1.16213 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.16214 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.16215 ++ esac ;;
1.16216 ++esac
1.16217 ++ac_abs_top_builddir=$ac_pwd
1.16218 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.16219 ++# for backward compatibility:
1.16220 ++ac_top_builddir=$ac_top_build_prefix
1.16221 +
1.16222 + case $srcdir in
1.16223 +- .) # No --srcdir option. We are building in place.
1.16224 ++ .) # We are building in place.
1.16225 + ac_srcdir=.
1.16226 +- if test -z "$ac_top_builddir"; then
1.16227 +- ac_top_srcdir=.
1.16228 +- else
1.16229 +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1.16230 +- fi ;;
1.16231 +- [\\/]* | ?:[\\/]* ) # Absolute path.
1.16232 ++ ac_top_srcdir=$ac_top_builddir_sub
1.16233 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.16234 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.16235 + ac_srcdir=$srcdir$ac_dir_suffix;
1.16236 +- ac_top_srcdir=$srcdir ;;
1.16237 +- *) # Relative path.
1.16238 +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1.16239 +- ac_top_srcdir=$ac_top_builddir$srcdir ;;
1.16240 +-esac
1.16241 +-
1.16242 +-# Do not use `cd foo && pwd` to compute absolute paths, because
1.16243 +-# the directories may not exist.
1.16244 +-case `pwd` in
1.16245 +-.) ac_abs_builddir="$ac_dir";;
1.16246 +-*)
1.16247 +- case "$ac_dir" in
1.16248 +- .) ac_abs_builddir=`pwd`;;
1.16249 +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
1.16250 +- *) ac_abs_builddir=`pwd`/"$ac_dir";;
1.16251 +- esac;;
1.16252 +-esac
1.16253 +-case $ac_abs_builddir in
1.16254 +-.) ac_abs_top_builddir=${ac_top_builddir}.;;
1.16255 +-*)
1.16256 +- case ${ac_top_builddir}. in
1.16257 +- .) ac_abs_top_builddir=$ac_abs_builddir;;
1.16258 +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
1.16259 +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
1.16260 +- esac;;
1.16261 +-esac
1.16262 +-case $ac_abs_builddir in
1.16263 +-.) ac_abs_srcdir=$ac_srcdir;;
1.16264 +-*)
1.16265 +- case $ac_srcdir in
1.16266 +- .) ac_abs_srcdir=$ac_abs_builddir;;
1.16267 +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
1.16268 +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
1.16269 +- esac;;
1.16270 +-esac
1.16271 +-case $ac_abs_builddir in
1.16272 +-.) ac_abs_top_srcdir=$ac_top_srcdir;;
1.16273 +-*)
1.16274 +- case $ac_top_srcdir in
1.16275 +- .) ac_abs_top_srcdir=$ac_abs_builddir;;
1.16276 +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
1.16277 +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
1.16278 +- esac;;
1.16279 ++ ac_top_srcdir=$srcdir
1.16280 ++ ac_abs_top_srcdir=$srcdir ;;
1.16281 ++ *) # Relative name.
1.16282 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.16283 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.16284 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.16285 + esac
1.16286 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.16287 +
1.16288 +
1.16289 + cd "$ac_dir"
1.16290 +@@ -13924,8 +14967,8 @@
1.16291 + # Make the cache file name correct relative to the subdirectory.
1.16292 + case $cache_file in
1.16293 + [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
1.16294 +- *) # Relative path.
1.16295 +- ac_sub_cache_file=$ac_top_builddir$cache_file ;;
1.16296 ++ *) # Relative name.
1.16297 ++ ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
1.16298 + esac
1.16299 +
1.16300 + { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
1.16301 +diff -Naur newlib-1.17.0/newlib/libc/machine/configure.in newlib-1.17.0-new/newlib/libc/machine/configure.in
1.16302 +--- newlib-1.17.0/newlib/libc/machine/configure.in 2008-12-11 21:05:38.000000000 +0100
1.16303 ++++ newlib-1.17.0-new/newlib/libc/machine/configure.in 2009-05-22 09:57:50.000000000 +0200
1.16304 +@@ -24,6 +24,7 @@
1.16305 + case ${machine_dir} in
1.16306 + a29k) AC_CONFIG_SUBDIRS(a29k) ;;
1.16307 + arm) AC_CONFIG_SUBDIRS(arm) ;;
1.16308 ++ avr32) AC_CONFIG_SUBDIRS(avr32) ;;
1.16309 + bfin) AC_CONFIG_SUBDIRS(bfin) ;;
1.16310 + cris) AC_CONFIG_SUBDIRS(cris) ;;
1.16311 + crx) AC_CONFIG_SUBDIRS(crx) ;;
1.16312 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4
1.16313 +--- newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 1970-01-01 01:00:00.000000000 +0100
1.16314 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4 2009-05-22 09:57:50.000000000 +0200
1.16315 +@@ -0,0 +1,366 @@
1.16316 ++dnl aclocal.m4 generated automatically by aclocal 1.4-p6
1.16317 ++
1.16318 ++dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
1.16319 ++dnl This file is free software; the Free Software Foundation
1.16320 ++dnl gives unlimited permission to copy and/or distribute it,
1.16321 ++dnl with or without modifications, as long as this notice is preserved.
1.16322 ++
1.16323 ++dnl This program is distributed in the hope that it will be useful,
1.16324 ++dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
1.16325 ++dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
1.16326 ++dnl PARTICULAR PURPOSE.
1.16327 ++
1.16328 ++dnl This provides configure definitions used by all the newlib
1.16329 ++dnl configure.in files.
1.16330 ++
1.16331 ++dnl Basic newlib configury. This calls basic introductory stuff,
1.16332 ++dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs
1.16333 ++dnl configure.host. The only argument is the relative path to the top
1.16334 ++dnl newlib directory.
1.16335 ++
1.16336 ++AC_DEFUN(NEWLIB_CONFIGURE,
1.16337 ++[
1.16338 ++dnl Default to --enable-multilib
1.16339 ++AC_ARG_ENABLE(multilib,
1.16340 ++[ --enable-multilib build many library versions (default)],
1.16341 ++[case "${enableval}" in
1.16342 ++ yes) multilib=yes ;;
1.16343 ++ no) multilib=no ;;
1.16344 ++ *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
1.16345 ++ esac], [multilib=yes])dnl
1.16346 ++
1.16347 ++dnl Support --enable-target-optspace
1.16348 ++AC_ARG_ENABLE(target-optspace,
1.16349 ++[ --enable-target-optspace optimize for space],
1.16350 ++[case "${enableval}" in
1.16351 ++ yes) target_optspace=yes ;;
1.16352 ++ no) target_optspace=no ;;
1.16353 ++ *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
1.16354 ++ esac], [target_optspace=])dnl
1.16355 ++
1.16356 ++dnl Support --enable-malloc-debugging - currently only supported for Cygwin
1.16357 ++AC_ARG_ENABLE(malloc-debugging,
1.16358 ++[ --enable-malloc-debugging indicate malloc debugging requested],
1.16359 ++[case "${enableval}" in
1.16360 ++ yes) malloc_debugging=yes ;;
1.16361 ++ no) malloc_debugging=no ;;
1.16362 ++ *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
1.16363 ++ esac], [malloc_debugging=])dnl
1.16364 ++
1.16365 ++dnl Support --enable-newlib-multithread
1.16366 ++AC_ARG_ENABLE(newlib-multithread,
1.16367 ++[ --enable-newlib-multithread enable support for multiple threads],
1.16368 ++[case "${enableval}" in
1.16369 ++ yes) newlib_multithread=yes ;;
1.16370 ++ no) newlib_multithread=no ;;
1.16371 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
1.16372 ++ esac], [newlib_multithread=yes])dnl
1.16373 ++
1.16374 ++dnl Support --enable-newlib-iconv
1.16375 ++AC_ARG_ENABLE(newlib-iconv,
1.16376 ++[ --enable-newlib-iconv enable iconv library support],
1.16377 ++[if test "${newlib_iconv+set}" != set; then
1.16378 ++ case "${enableval}" in
1.16379 ++ yes) newlib_iconv=yes ;;
1.16380 ++ no) newlib_iconv=no ;;
1.16381 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;;
1.16382 ++ esac
1.16383 ++ fi], [newlib_iconv=${newlib_iconv}])dnl
1.16384 ++
1.16385 ++dnl Support --enable-newlib-elix-level
1.16386 ++AC_ARG_ENABLE(newlib-elix-level,
1.16387 ++[ --enable-newlib-elix-level supply desired elix library level (1-4)],
1.16388 ++[case "${enableval}" in
1.16389 ++ 0) newlib_elix_level=0 ;;
1.16390 ++ 1) newlib_elix_level=1 ;;
1.16391 ++ 2) newlib_elix_level=2 ;;
1.16392 ++ 3) newlib_elix_level=3 ;;
1.16393 ++ 4) newlib_elix_level=4 ;;
1.16394 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
1.16395 ++ esac], [newlib_elix_level=0])dnl
1.16396 ++
1.16397 ++dnl Support --disable-newlib-io-float
1.16398 ++AC_ARG_ENABLE(newlib-io-float,
1.16399 ++[ --disable-newlib-io-float disable printf/scanf family float support],
1.16400 ++[case "${enableval}" in
1.16401 ++ yes) newlib_io_float=yes ;;
1.16402 ++ no) newlib_io_float=no ;;
1.16403 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
1.16404 ++ esac], [newlib_io_float=yes])dnl
1.16405 ++
1.16406 ++dnl Support --disable-newlib-supplied-syscalls
1.16407 ++AC_ARG_ENABLE(newlib-supplied-syscalls,
1.16408 ++[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
1.16409 ++[case "${enableval}" in
1.16410 ++ yes) newlib_may_supply_syscalls=yes ;;
1.16411 ++ no) newlib_may_supply_syscalls=no ;;
1.16412 ++ *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
1.16413 ++ esac], [newlib_may_supply_syscalls=yes])dnl
1.16414 ++
1.16415 ++AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
1.16416 ++
1.16417 ++dnl We may get other options which we don't document:
1.16418 ++dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
1.16419 ++
1.16420 ++test -z "[$]{with_target_subdir}" && with_target_subdir=.
1.16421 ++
1.16422 ++if test "[$]{srcdir}" = "."; then
1.16423 ++ if test "[$]{with_target_subdir}" != "."; then
1.16424 ++ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
1.16425 ++ else
1.16426 ++ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
1.16427 ++ fi
1.16428 ++else
1.16429 ++ newlib_basedir="[$]{srcdir}/$1"
1.16430 ++fi
1.16431 ++AC_SUBST(newlib_basedir)
1.16432 ++
1.16433 ++AC_CANONICAL_SYSTEM
1.16434 ++
1.16435 ++AM_INIT_AUTOMAKE(newlib, 1.14.0.atmel.1.0.1)
1.16436 ++
1.16437 ++# FIXME: We temporarily define our own version of AC_PROG_CC. This is
1.16438 ++# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
1.16439 ++# are probably using a cross compiler, which will not be able to fully
1.16440 ++# link an executable. This should really be fixed in autoconf
1.16441 ++# itself.
1.16442 ++
1.16443 ++AC_DEFUN(LIB_AC_PROG_CC,
1.16444 ++[AC_BEFORE([$0], [AC_PROG_CPP])dnl
1.16445 ++AC_CHECK_PROG(CC, gcc, gcc)
1.16446 ++if test -z "$CC"; then
1.16447 ++ AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
1.16448 ++ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
1.16449 ++fi
1.16450 ++
1.16451 ++AC_PROG_CC_GNU
1.16452 ++
1.16453 ++if test $ac_cv_prog_gcc = yes; then
1.16454 ++ GCC=yes
1.16455 ++dnl Check whether -g works, even if CFLAGS is set, in case the package
1.16456 ++dnl plays around with CFLAGS (such as to build both debugging and
1.16457 ++dnl normal versions of a library), tasteless as that idea is.
1.16458 ++ ac_test_CFLAGS="${CFLAGS+set}"
1.16459 ++ ac_save_CFLAGS="$CFLAGS"
1.16460 ++ CFLAGS=
1.16461 ++ AC_PROG_CC_G
1.16462 ++ if test "$ac_test_CFLAGS" = set; then
1.16463 ++ CFLAGS="$ac_save_CFLAGS"
1.16464 ++ elif test $ac_cv_prog_cc_g = yes; then
1.16465 ++ CFLAGS="-g -O2"
1.16466 ++ else
1.16467 ++ CFLAGS="-O2"
1.16468 ++ fi
1.16469 ++else
1.16470 ++ GCC=
1.16471 ++ test "${CFLAGS+set}" = set || CFLAGS="-g"
1.16472 ++fi
1.16473 ++])
1.16474 ++
1.16475 ++LIB_AC_PROG_CC
1.16476 ++
1.16477 ++AC_CHECK_TOOL(AS, as)
1.16478 ++AC_CHECK_TOOL(AR, ar)
1.16479 ++AC_CHECK_TOOL(RANLIB, ranlib, :)
1.16480 ++
1.16481 ++AC_PROG_INSTALL
1.16482 ++
1.16483 ++AM_MAINTAINER_MODE
1.16484 ++
1.16485 ++# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
1.16486 ++# at least currently, we never actually build a program, so we never
1.16487 ++# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
1.16488 ++# fails, because we are probably configuring with a cross compiler
1.16489 ++# which can't create executables. So we include AC_EXEEXT to keep
1.16490 ++# automake happy, but we don't execute it, since we don't care about
1.16491 ++# the result.
1.16492 ++if false; then
1.16493 ++ AC_EXEEXT
1.16494 ++fi
1.16495 ++
1.16496 ++. [$]{newlib_basedir}/configure.host
1.16497 ++
1.16498 ++newlib_cflags="[$]{newlib_cflags} -fno-builtin"
1.16499 ++
1.16500 ++NEWLIB_CFLAGS=${newlib_cflags}
1.16501 ++AC_SUBST(NEWLIB_CFLAGS)
1.16502 ++
1.16503 ++LDFLAGS=${ldflags}
1.16504 ++AC_SUBST(LDFLAGS)
1.16505 ++
1.16506 ++AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
1.16507 ++AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
1.16508 ++AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
1.16509 ++AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
1.16510 ++AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
1.16511 ++
1.16512 ++AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
1.16513 ++
1.16514 ++# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we
1.16515 ++# use oext, which is set in configure.host based on the target platform.
1.16516 ++OBJEXT=${oext}
1.16517 ++
1.16518 ++AC_SUBST(OBJEXT)
1.16519 ++AC_SUBST(oext)
1.16520 ++AC_SUBST(aext)
1.16521 ++
1.16522 ++AC_SUBST(libm_machine_dir)
1.16523 ++AC_SUBST(machine_dir)
1.16524 ++AC_SUBST(sys_dir)
1.16525 ++])
1.16526 ++
1.16527 ++# Do all the work for Automake. This macro actually does too much --
1.16528 ++# some checks are only needed if your package does certain things.
1.16529 ++# But this isn't really a big deal.
1.16530 ++
1.16531 ++# serial 1
1.16532 ++
1.16533 ++dnl Usage:
1.16534 ++dnl AM_INIT_AUTOMAKE(package,version, [no-define])
1.16535 ++
1.16536 ++AC_DEFUN([AM_INIT_AUTOMAKE],
1.16537 ++[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
1.16538 ++AC_REQUIRE([AC_PROG_INSTALL])
1.16539 ++PACKAGE=[$1]
1.16540 ++AC_SUBST(PACKAGE)
1.16541 ++VERSION=[$2]
1.16542 ++AC_SUBST(VERSION)
1.16543 ++dnl test to see if srcdir already configured
1.16544 ++if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
1.16545 ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
1.16546 ++fi
1.16547 ++ifelse([$3],,
1.16548 ++AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
1.16549 ++AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
1.16550 ++AC_REQUIRE([AM_SANITY_CHECK])
1.16551 ++AC_REQUIRE([AC_ARG_PROGRAM])
1.16552 ++dnl FIXME This is truly gross.
1.16553 ++missing_dir=`cd $ac_aux_dir && pwd`
1.16554 ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
1.16555 ++AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
1.16556 ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
1.16557 ++AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
1.16558 ++AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
1.16559 ++AC_REQUIRE([AC_PROG_MAKE_SET])])
1.16560 ++
1.16561 ++# Copyright 2002 Free Software Foundation, Inc.
1.16562 ++
1.16563 ++# This program is free software; you can redistribute it and/or modify
1.16564 ++# it under the terms of the GNU General Public License as published by
1.16565 ++# the Free Software Foundation; either version 2, or (at your option)
1.16566 ++# any later version.
1.16567 ++
1.16568 ++# This program is distributed in the hope that it will be useful,
1.16569 ++# but WITHOUT ANY WARRANTY; without even the implied warranty of
1.16570 ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
1.16571 ++# GNU General Public License for more details.
1.16572 ++
1.16573 ++# You should have received a copy of the GNU General Public License
1.16574 ++# along with this program; if not, write to the Free Software
1.16575 ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
1.16576 ++
1.16577 ++# AM_AUTOMAKE_VERSION(VERSION)
1.16578 ++# ----------------------------
1.16579 ++# Automake X.Y traces this macro to ensure aclocal.m4 has been
1.16580 ++# generated from the m4 files accompanying Automake X.Y.
1.16581 ++AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
1.16582 ++
1.16583 ++# AM_SET_CURRENT_AUTOMAKE_VERSION
1.16584 ++# -------------------------------
1.16585 ++# Call AM_AUTOMAKE_VERSION so it can be traced.
1.16586 ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
1.16587 ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
1.16588 ++ [AM_AUTOMAKE_VERSION([1.4-p6])])
1.16589 ++
1.16590 ++#
1.16591 ++# Check to make sure that the build environment is sane.
1.16592 ++#
1.16593 ++
1.16594 ++AC_DEFUN([AM_SANITY_CHECK],
1.16595 ++[AC_MSG_CHECKING([whether build environment is sane])
1.16596 ++# Just in case
1.16597 ++sleep 1
1.16598 ++echo timestamp > conftestfile
1.16599 ++# Do `set' in a subshell so we don't clobber the current shell's
1.16600 ++# arguments. Must try -L first in case configure is actually a
1.16601 ++# symlink; some systems play weird games with the mod time of symlinks
1.16602 ++# (eg FreeBSD returns the mod time of the symlink's containing
1.16603 ++# directory).
1.16604 ++if (
1.16605 ++ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
1.16606 ++ if test "[$]*" = "X"; then
1.16607 ++ # -L didn't work.
1.16608 ++ set X `ls -t $srcdir/configure conftestfile`
1.16609 ++ fi
1.16610 ++ if test "[$]*" != "X $srcdir/configure conftestfile" \
1.16611 ++ && test "[$]*" != "X conftestfile $srcdir/configure"; then
1.16612 ++
1.16613 ++ # If neither matched, then we have a broken ls. This can happen
1.16614 ++ # if, for instance, CONFIG_SHELL is bash and it inherits a
1.16615 ++ # broken ls alias from the environment. This has actually
1.16616 ++ # happened. Such a system could not be considered "sane".
1.16617 ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
1.16618 ++alias in your environment])
1.16619 ++ fi
1.16620 ++
1.16621 ++ test "[$]2" = conftestfile
1.16622 ++ )
1.16623 ++then
1.16624 ++ # Ok.
1.16625 ++ :
1.16626 ++else
1.16627 ++ AC_MSG_ERROR([newly created file is older than distributed files!
1.16628 ++Check your system clock])
1.16629 ++fi
1.16630 ++rm -f conftest*
1.16631 ++AC_MSG_RESULT(yes)])
1.16632 ++
1.16633 ++dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
1.16634 ++dnl The program must properly implement --version.
1.16635 ++AC_DEFUN([AM_MISSING_PROG],
1.16636 ++[AC_MSG_CHECKING(for working $2)
1.16637 ++# Run test in a subshell; some versions of sh will print an error if
1.16638 ++# an executable is not found, even if stderr is redirected.
1.16639 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.16640 ++if ($2 --version) < /dev/null > /dev/null 2>&1; then
1.16641 ++ $1=$2
1.16642 ++ AC_MSG_RESULT(found)
1.16643 ++else
1.16644 ++ $1="$3/missing $2"
1.16645 ++ AC_MSG_RESULT(missing)
1.16646 ++fi
1.16647 ++AC_SUBST($1)])
1.16648 ++
1.16649 ++# Define a conditional.
1.16650 ++
1.16651 ++AC_DEFUN([AM_CONDITIONAL],
1.16652 ++[AC_SUBST($1_TRUE)
1.16653 ++AC_SUBST($1_FALSE)
1.16654 ++if $2; then
1.16655 ++ $1_TRUE=
1.16656 ++ $1_FALSE='#'
1.16657 ++else
1.16658 ++ $1_TRUE='#'
1.16659 ++ $1_FALSE=
1.16660 ++fi])
1.16661 ++
1.16662 ++# Add --enable-maintainer-mode option to configure.
1.16663 ++# From Jim Meyering
1.16664 ++
1.16665 ++# serial 1
1.16666 ++
1.16667 ++AC_DEFUN([AM_MAINTAINER_MODE],
1.16668 ++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
1.16669 ++ dnl maintainer-mode is disabled by default
1.16670 ++ AC_ARG_ENABLE(maintainer-mode,
1.16671 ++[ --enable-maintainer-mode enable make rules and dependencies not useful
1.16672 ++ (and sometimes confusing) to the casual installer],
1.16673 ++ USE_MAINTAINER_MODE=$enableval,
1.16674 ++ USE_MAINTAINER_MODE=no)
1.16675 ++ AC_MSG_RESULT($USE_MAINTAINER_MODE)
1.16676 ++ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
1.16677 ++ MAINT=$MAINTAINER_MODE_TRUE
1.16678 ++ AC_SUBST(MAINT)dnl
1.16679 ++]
1.16680 ++)
1.16681 ++
1.16682 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h
1.16683 +--- newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h 1970-01-01 01:00:00.000000000 +0100
1.16684 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h 2009-05-22 09:57:50.000000000 +0200
1.16685 +@@ -0,0 +1 @@
1.16686 ++
1.16687 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure newlib-1.17.0-new/newlib/libc/sys/avr32/configure
1.16688 +--- newlib-1.17.0/newlib/libc/sys/avr32/configure 1970-01-01 01:00:00.000000000 +0100
1.16689 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure 2009-05-22 09:57:50.000000000 +0200
1.16690 +@@ -0,0 +1,3922 @@
1.16691 ++#! /bin/sh
1.16692 ++# Guess values for system-dependent variables and create Makefiles.
1.16693 ++# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION.
1.16694 ++#
1.16695 ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
1.16696 ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.16697 ++# This configure script is free software; the Free Software Foundation
1.16698 ++# gives unlimited permission to copy, distribute and modify it.
1.16699 ++## --------------------- ##
1.16700 ++## M4sh Initialization. ##
1.16701 ++## --------------------- ##
1.16702 ++
1.16703 ++# Be more Bourne compatible
1.16704 ++DUALCASE=1; export DUALCASE # for MKS sh
1.16705 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.16706 ++ emulate sh
1.16707 ++ NULLCMD=:
1.16708 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.16709 ++ # is contrary to our usage. Disable this feature.
1.16710 ++ alias -g '${1+"$@"}'='"$@"'
1.16711 ++ setopt NO_GLOB_SUBST
1.16712 ++else
1.16713 ++ case `(set -o) 2>/dev/null` in
1.16714 ++ *posix*) set -o posix ;;
1.16715 ++esac
1.16716 ++
1.16717 ++fi
1.16718 ++
1.16719 ++
1.16720 ++
1.16721 ++
1.16722 ++# PATH needs CR
1.16723 ++# Avoid depending upon Character Ranges.
1.16724 ++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.16725 ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.16726 ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.16727 ++as_cr_digits='0123456789'
1.16728 ++as_cr_alnum=$as_cr_Letters$as_cr_digits
1.16729 ++
1.16730 ++# The user is always right.
1.16731 ++if test "${PATH_SEPARATOR+set}" != set; then
1.16732 ++ echo "#! /bin/sh" >conf$$.sh
1.16733 ++ echo "exit 0" >>conf$$.sh
1.16734 ++ chmod +x conf$$.sh
1.16735 ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.16736 ++ PATH_SEPARATOR=';'
1.16737 ++ else
1.16738 ++ PATH_SEPARATOR=:
1.16739 ++ fi
1.16740 ++ rm -f conf$$.sh
1.16741 ++fi
1.16742 ++
1.16743 ++# Support unset when possible.
1.16744 ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.16745 ++ as_unset=unset
1.16746 ++else
1.16747 ++ as_unset=false
1.16748 ++fi
1.16749 ++
1.16750 ++
1.16751 ++# IFS
1.16752 ++# We need space, tab and new line, in precisely that order. Quoting is
1.16753 ++# there to prevent editors from complaining about space-tab.
1.16754 ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
1.16755 ++# splitting by setting IFS to empty value.)
1.16756 ++as_nl='
1.16757 ++'
1.16758 ++IFS=" "" $as_nl"
1.16759 ++
1.16760 ++# Find who we are. Look in the path if we contain no directory separator.
1.16761 ++case $0 in
1.16762 ++ *[\\/]* ) as_myself=$0 ;;
1.16763 ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.16764 ++for as_dir in $PATH
1.16765 ++do
1.16766 ++ IFS=$as_save_IFS
1.16767 ++ test -z "$as_dir" && as_dir=.
1.16768 ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.16769 ++done
1.16770 ++IFS=$as_save_IFS
1.16771 ++
1.16772 ++ ;;
1.16773 ++esac
1.16774 ++# We did not find ourselves, most probably we were run as `sh COMMAND'
1.16775 ++# in which case we are not to be found in the path.
1.16776 ++if test "x$as_myself" = x; then
1.16777 ++ as_myself=$0
1.16778 ++fi
1.16779 ++if test ! -f "$as_myself"; then
1.16780 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
1.16781 ++ { (exit 1); exit 1; }
1.16782 ++fi
1.16783 ++
1.16784 ++# Work around bugs in pre-3.0 UWIN ksh.
1.16785 ++for as_var in ENV MAIL MAILPATH
1.16786 ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.16787 ++done
1.16788 ++PS1='$ '
1.16789 ++PS2='> '
1.16790 ++PS4='+ '
1.16791 ++
1.16792 ++# NLS nuisances.
1.16793 ++for as_var in \
1.16794 ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
1.16795 ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
1.16796 ++ LC_TELEPHONE LC_TIME
1.16797 ++do
1.16798 ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1.16799 ++ eval $as_var=C; export $as_var
1.16800 ++ else
1.16801 ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.16802 ++ fi
1.16803 ++done
1.16804 ++
1.16805 ++# Required to use basename.
1.16806 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.16807 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.16808 ++ as_expr=expr
1.16809 ++else
1.16810 ++ as_expr=false
1.16811 ++fi
1.16812 ++
1.16813 ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
1.16814 ++ as_basename=basename
1.16815 ++else
1.16816 ++ as_basename=false
1.16817 ++fi
1.16818 ++
1.16819 ++
1.16820 ++# Name of the executable.
1.16821 ++as_me=`$as_basename -- "$0" ||
1.16822 ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1.16823 ++ X"$0" : 'X\(//\)$' \| \
1.16824 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.16825 ++echo X/"$0" |
1.16826 ++ sed '/^.*\/\([^/][^/]*\)\/*$/{
1.16827 ++ s//\1/
1.16828 ++ q
1.16829 ++ }
1.16830 ++ /^X\/\(\/\/\)$/{
1.16831 ++ s//\1/
1.16832 ++ q
1.16833 ++ }
1.16834 ++ /^X\/\(\/\).*/{
1.16835 ++ s//\1/
1.16836 ++ q
1.16837 ++ }
1.16838 ++ s/.*/./; q'`
1.16839 ++
1.16840 ++# CDPATH.
1.16841 ++$as_unset CDPATH
1.16842 ++
1.16843 ++
1.16844 ++if test "x$CONFIG_SHELL" = x; then
1.16845 ++ if (eval ":") 2>/dev/null; then
1.16846 ++ as_have_required=yes
1.16847 ++else
1.16848 ++ as_have_required=no
1.16849 ++fi
1.16850 ++
1.16851 ++ if test $as_have_required = yes && (eval ":
1.16852 ++(as_func_return () {
1.16853 ++ (exit \$1)
1.16854 ++}
1.16855 ++as_func_success () {
1.16856 ++ as_func_return 0
1.16857 ++}
1.16858 ++as_func_failure () {
1.16859 ++ as_func_return 1
1.16860 ++}
1.16861 ++as_func_ret_success () {
1.16862 ++ return 0
1.16863 ++}
1.16864 ++as_func_ret_failure () {
1.16865 ++ return 1
1.16866 ++}
1.16867 ++
1.16868 ++exitcode=0
1.16869 ++if as_func_success; then
1.16870 ++ :
1.16871 ++else
1.16872 ++ exitcode=1
1.16873 ++ echo as_func_success failed.
1.16874 ++fi
1.16875 ++
1.16876 ++if as_func_failure; then
1.16877 ++ exitcode=1
1.16878 ++ echo as_func_failure succeeded.
1.16879 ++fi
1.16880 ++
1.16881 ++if as_func_ret_success; then
1.16882 ++ :
1.16883 ++else
1.16884 ++ exitcode=1
1.16885 ++ echo as_func_ret_success failed.
1.16886 ++fi
1.16887 ++
1.16888 ++if as_func_ret_failure; then
1.16889 ++ exitcode=1
1.16890 ++ echo as_func_ret_failure succeeded.
1.16891 ++fi
1.16892 ++
1.16893 ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
1.16894 ++ :
1.16895 ++else
1.16896 ++ exitcode=1
1.16897 ++ echo positional parameters were not saved.
1.16898 ++fi
1.16899 ++
1.16900 ++test \$exitcode = 0) || { (exit 1); exit 1; }
1.16901 ++
1.16902 ++(
1.16903 ++ as_lineno_1=\$LINENO
1.16904 ++ as_lineno_2=\$LINENO
1.16905 ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
1.16906 ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
1.16907 ++") 2> /dev/null; then
1.16908 ++ :
1.16909 ++else
1.16910 ++ as_candidate_shells=
1.16911 ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.16912 ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1.16913 ++do
1.16914 ++ IFS=$as_save_IFS
1.16915 ++ test -z "$as_dir" && as_dir=.
1.16916 ++ case $as_dir in
1.16917 ++ /*)
1.16918 ++ for as_base in sh bash ksh sh5; do
1.16919 ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
1.16920 ++ done;;
1.16921 ++ esac
1.16922 ++done
1.16923 ++IFS=$as_save_IFS
1.16924 ++
1.16925 ++
1.16926 ++ for as_shell in $as_candidate_shells $SHELL; do
1.16927 ++ # Try only shells that exist, to save several forks.
1.16928 ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
1.16929 ++ { ("$as_shell") 2> /dev/null <<\_ASEOF
1.16930 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.16931 ++ emulate sh
1.16932 ++ NULLCMD=:
1.16933 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.16934 ++ # is contrary to our usage. Disable this feature.
1.16935 ++ alias -g '${1+"$@"}'='"$@"'
1.16936 ++ setopt NO_GLOB_SUBST
1.16937 ++else
1.16938 ++ case `(set -o) 2>/dev/null` in
1.16939 ++ *posix*) set -o posix ;;
1.16940 ++esac
1.16941 ++
1.16942 ++fi
1.16943 ++
1.16944 ++
1.16945 ++:
1.16946 ++_ASEOF
1.16947 ++}; then
1.16948 ++ CONFIG_SHELL=$as_shell
1.16949 ++ as_have_required=yes
1.16950 ++ if { "$as_shell" 2> /dev/null <<\_ASEOF
1.16951 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.16952 ++ emulate sh
1.16953 ++ NULLCMD=:
1.16954 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.16955 ++ # is contrary to our usage. Disable this feature.
1.16956 ++ alias -g '${1+"$@"}'='"$@"'
1.16957 ++ setopt NO_GLOB_SUBST
1.16958 ++else
1.16959 ++ case `(set -o) 2>/dev/null` in
1.16960 ++ *posix*) set -o posix ;;
1.16961 ++esac
1.16962 ++
1.16963 ++fi
1.16964 ++
1.16965 ++
1.16966 ++:
1.16967 ++(as_func_return () {
1.16968 ++ (exit $1)
1.16969 ++}
1.16970 ++as_func_success () {
1.16971 ++ as_func_return 0
1.16972 ++}
1.16973 ++as_func_failure () {
1.16974 ++ as_func_return 1
1.16975 ++}
1.16976 ++as_func_ret_success () {
1.16977 ++ return 0
1.16978 ++}
1.16979 ++as_func_ret_failure () {
1.16980 ++ return 1
1.16981 ++}
1.16982 ++
1.16983 ++exitcode=0
1.16984 ++if as_func_success; then
1.16985 ++ :
1.16986 ++else
1.16987 ++ exitcode=1
1.16988 ++ echo as_func_success failed.
1.16989 ++fi
1.16990 ++
1.16991 ++if as_func_failure; then
1.16992 ++ exitcode=1
1.16993 ++ echo as_func_failure succeeded.
1.16994 ++fi
1.16995 ++
1.16996 ++if as_func_ret_success; then
1.16997 ++ :
1.16998 ++else
1.16999 ++ exitcode=1
1.17000 ++ echo as_func_ret_success failed.
1.17001 ++fi
1.17002 ++
1.17003 ++if as_func_ret_failure; then
1.17004 ++ exitcode=1
1.17005 ++ echo as_func_ret_failure succeeded.
1.17006 ++fi
1.17007 ++
1.17008 ++if ( set x; as_func_ret_success y && test x = "$1" ); then
1.17009 ++ :
1.17010 ++else
1.17011 ++ exitcode=1
1.17012 ++ echo positional parameters were not saved.
1.17013 ++fi
1.17014 ++
1.17015 ++test $exitcode = 0) || { (exit 1); exit 1; }
1.17016 ++
1.17017 ++(
1.17018 ++ as_lineno_1=$LINENO
1.17019 ++ as_lineno_2=$LINENO
1.17020 ++ test "x$as_lineno_1" != "x$as_lineno_2" &&
1.17021 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
1.17022 ++
1.17023 ++_ASEOF
1.17024 ++}; then
1.17025 ++ break
1.17026 ++fi
1.17027 ++
1.17028 ++fi
1.17029 ++
1.17030 ++ done
1.17031 ++
1.17032 ++ if test "x$CONFIG_SHELL" != x; then
1.17033 ++ for as_var in BASH_ENV ENV
1.17034 ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.17035 ++ done
1.17036 ++ export CONFIG_SHELL
1.17037 ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
1.17038 ++fi
1.17039 ++
1.17040 ++
1.17041 ++ if test $as_have_required = no; then
1.17042 ++ echo This script requires a shell more modern than all the
1.17043 ++ echo shells that I found on your system. Please install a
1.17044 ++ echo modern shell, or manually run the script under such a
1.17045 ++ echo shell if you do have one.
1.17046 ++ { (exit 1); exit 1; }
1.17047 ++fi
1.17048 ++
1.17049 ++
1.17050 ++fi
1.17051 ++
1.17052 ++fi
1.17053 ++
1.17054 ++
1.17055 ++
1.17056 ++(eval "as_func_return () {
1.17057 ++ (exit \$1)
1.17058 ++}
1.17059 ++as_func_success () {
1.17060 ++ as_func_return 0
1.17061 ++}
1.17062 ++as_func_failure () {
1.17063 ++ as_func_return 1
1.17064 ++}
1.17065 ++as_func_ret_success () {
1.17066 ++ return 0
1.17067 ++}
1.17068 ++as_func_ret_failure () {
1.17069 ++ return 1
1.17070 ++}
1.17071 ++
1.17072 ++exitcode=0
1.17073 ++if as_func_success; then
1.17074 ++ :
1.17075 ++else
1.17076 ++ exitcode=1
1.17077 ++ echo as_func_success failed.
1.17078 ++fi
1.17079 ++
1.17080 ++if as_func_failure; then
1.17081 ++ exitcode=1
1.17082 ++ echo as_func_failure succeeded.
1.17083 ++fi
1.17084 ++
1.17085 ++if as_func_ret_success; then
1.17086 ++ :
1.17087 ++else
1.17088 ++ exitcode=1
1.17089 ++ echo as_func_ret_success failed.
1.17090 ++fi
1.17091 ++
1.17092 ++if as_func_ret_failure; then
1.17093 ++ exitcode=1
1.17094 ++ echo as_func_ret_failure succeeded.
1.17095 ++fi
1.17096 ++
1.17097 ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
1.17098 ++ :
1.17099 ++else
1.17100 ++ exitcode=1
1.17101 ++ echo positional parameters were not saved.
1.17102 ++fi
1.17103 ++
1.17104 ++test \$exitcode = 0") || {
1.17105 ++ echo No shell found that supports shell functions.
1.17106 ++ echo Please tell autoconf@gnu.org about your system,
1.17107 ++ echo including any error possibly output before this
1.17108 ++ echo message
1.17109 ++}
1.17110 ++
1.17111 ++
1.17112 ++
1.17113 ++ as_lineno_1=$LINENO
1.17114 ++ as_lineno_2=$LINENO
1.17115 ++ test "x$as_lineno_1" != "x$as_lineno_2" &&
1.17116 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
1.17117 ++
1.17118 ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1.17119 ++ # uniformly replaced by the line number. The first 'sed' inserts a
1.17120 ++ # line-number line after each line using $LINENO; the second 'sed'
1.17121 ++ # does the real work. The second script uses 'N' to pair each
1.17122 ++ # line-number line with the line containing $LINENO, and appends
1.17123 ++ # trailing '-' during substitution so that $LINENO is not a special
1.17124 ++ # case at line end.
1.17125 ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1.17126 ++ # scripts with optimization help from Paolo Bonzini. Blame Lee
1.17127 ++ # E. McMahon (1931-1989) for sed's syntax. :-)
1.17128 ++ sed -n '
1.17129 ++ p
1.17130 ++ /[$]LINENO/=
1.17131 ++ ' <$as_myself |
1.17132 ++ sed '
1.17133 ++ s/[$]LINENO.*/&-/
1.17134 ++ t lineno
1.17135 ++ b
1.17136 ++ :lineno
1.17137 ++ N
1.17138 ++ :loop
1.17139 ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
1.17140 ++ t loop
1.17141 ++ s/-\n.*//
1.17142 ++ ' >$as_me.lineno &&
1.17143 ++ chmod +x "$as_me.lineno" ||
1.17144 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
1.17145 ++ { (exit 1); exit 1; }; }
1.17146 ++
1.17147 ++ # Don't try to exec as it changes $[0], causing all sort of problems
1.17148 ++ # (the dirname of $[0] is not the place where we might find the
1.17149 ++ # original and so on. Autoconf is especially sensitive to this).
1.17150 ++ . "./$as_me.lineno"
1.17151 ++ # Exit status is that of the last command.
1.17152 ++ exit
1.17153 ++}
1.17154 ++
1.17155 ++
1.17156 ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
1.17157 ++ as_dirname=dirname
1.17158 ++else
1.17159 ++ as_dirname=false
1.17160 ++fi
1.17161 ++
1.17162 ++ECHO_C= ECHO_N= ECHO_T=
1.17163 ++case `echo -n x` in
1.17164 ++-n*)
1.17165 ++ case `echo 'x\c'` in
1.17166 ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
1.17167 ++ *) ECHO_C='\c';;
1.17168 ++ esac;;
1.17169 ++*)
1.17170 ++ ECHO_N='-n';;
1.17171 ++esac
1.17172 ++
1.17173 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.17174 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.17175 ++ as_expr=expr
1.17176 ++else
1.17177 ++ as_expr=false
1.17178 ++fi
1.17179 ++
1.17180 ++rm -f conf$$ conf$$.exe conf$$.file
1.17181 ++if test -d conf$$.dir; then
1.17182 ++ rm -f conf$$.dir/conf$$.file
1.17183 ++else
1.17184 ++ rm -f conf$$.dir
1.17185 ++ mkdir conf$$.dir
1.17186 ++fi
1.17187 ++echo >conf$$.file
1.17188 ++if ln -s conf$$.file conf$$ 2>/dev/null; then
1.17189 ++ as_ln_s='ln -s'
1.17190 ++ # ... but there are two gotchas:
1.17191 ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
1.17192 ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
1.17193 ++ # In both cases, we have to default to `cp -p'.
1.17194 ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
1.17195 ++ as_ln_s='cp -p'
1.17196 ++elif ln conf$$.file conf$$ 2>/dev/null; then
1.17197 ++ as_ln_s=ln
1.17198 ++else
1.17199 ++ as_ln_s='cp -p'
1.17200 ++fi
1.17201 ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
1.17202 ++rmdir conf$$.dir 2>/dev/null
1.17203 ++
1.17204 ++if mkdir -p . 2>/dev/null; then
1.17205 ++ as_mkdir_p=:
1.17206 ++else
1.17207 ++ test -d ./-p && rmdir ./-p
1.17208 ++ as_mkdir_p=false
1.17209 ++fi
1.17210 ++
1.17211 ++if test -x / >/dev/null 2>&1; then
1.17212 ++ as_test_x='test -x'
1.17213 ++else
1.17214 ++ if ls -dL / >/dev/null 2>&1; then
1.17215 ++ as_ls_L_option=L
1.17216 ++ else
1.17217 ++ as_ls_L_option=
1.17218 ++ fi
1.17219 ++ as_test_x='
1.17220 ++ eval sh -c '\''
1.17221 ++ if test -d "$1"; then
1.17222 ++ test -d "$1/.";
1.17223 ++ else
1.17224 ++ case $1 in
1.17225 ++ -*)set "./$1";;
1.17226 ++ esac;
1.17227 ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
1.17228 ++ ???[sx]*):;;*)false;;esac;fi
1.17229 ++ '\'' sh
1.17230 ++ '
1.17231 ++fi
1.17232 ++as_executable_p=$as_test_x
1.17233 ++
1.17234 ++# Sed expression to map a string onto a valid CPP name.
1.17235 ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1.17236 ++
1.17237 ++# Sed expression to map a string onto a valid variable name.
1.17238 ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1.17239 ++
1.17240 ++
1.17241 ++
1.17242 ++exec 7<&0 </dev/null 6>&1
1.17243 ++
1.17244 ++# Name of the host.
1.17245 ++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
1.17246 ++# so uname gets run too.
1.17247 ++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
1.17248 ++
1.17249 ++#
1.17250 ++# Initializations.
1.17251 ++#
1.17252 ++ac_default_prefix=/usr/local
1.17253 ++ac_clean_files=
1.17254 ++ac_config_libobj_dir=.
1.17255 ++LIBOBJS=
1.17256 ++cross_compiling=no
1.17257 ++subdirs=
1.17258 ++MFLAGS=
1.17259 ++MAKEFLAGS=
1.17260 ++SHELL=${CONFIG_SHELL-/bin/sh}
1.17261 ++
1.17262 ++# Identity of this package.
1.17263 ++PACKAGE_NAME='newlib'
1.17264 ++PACKAGE_TARNAME='newlib'
1.17265 ++PACKAGE_VERSION='NEWLIB_VERSION'
1.17266 ++PACKAGE_STRING='newlib NEWLIB_VERSION'
1.17267 ++PACKAGE_BUGREPORT=''
1.17268 ++
1.17269 ++ac_subst_vars='SHELL
1.17270 ++PATH_SEPARATOR
1.17271 ++PACKAGE_NAME
1.17272 ++PACKAGE_TARNAME
1.17273 ++PACKAGE_VERSION
1.17274 ++PACKAGE_STRING
1.17275 ++PACKAGE_BUGREPORT
1.17276 ++exec_prefix
1.17277 ++prefix
1.17278 ++program_transform_name
1.17279 ++bindir
1.17280 ++sbindir
1.17281 ++libexecdir
1.17282 ++datarootdir
1.17283 ++datadir
1.17284 ++sysconfdir
1.17285 ++sharedstatedir
1.17286 ++localstatedir
1.17287 ++includedir
1.17288 ++oldincludedir
1.17289 ++docdir
1.17290 ++infodir
1.17291 ++htmldir
1.17292 ++dvidir
1.17293 ++pdfdir
1.17294 ++psdir
1.17295 ++libdir
1.17296 ++localedir
1.17297 ++mandir
1.17298 ++DEFS
1.17299 ++ECHO_C
1.17300 ++ECHO_N
1.17301 ++ECHO_T
1.17302 ++LIBS
1.17303 ++build_alias
1.17304 ++host_alias
1.17305 ++target_alias
1.17306 ++MAY_SUPPLY_SYSCALLS_TRUE
1.17307 ++MAY_SUPPLY_SYSCALLS_FALSE
1.17308 ++newlib_basedir
1.17309 ++build
1.17310 ++build_cpu
1.17311 ++build_vendor
1.17312 ++build_os
1.17313 ++host
1.17314 ++host_cpu
1.17315 ++host_vendor
1.17316 ++host_os
1.17317 ++target
1.17318 ++target_cpu
1.17319 ++target_vendor
1.17320 ++target_os
1.17321 ++INSTALL_PROGRAM
1.17322 ++INSTALL_SCRIPT
1.17323 ++INSTALL_DATA
1.17324 ++PACKAGE
1.17325 ++VERSION
1.17326 ++ACLOCAL
1.17327 ++AUTOCONF
1.17328 ++AUTOMAKE
1.17329 ++AUTOHEADER
1.17330 ++MAKEINFO
1.17331 ++SET_MAKE
1.17332 ++CC
1.17333 ++AS
1.17334 ++AR
1.17335 ++RANLIB
1.17336 ++MAINTAINER_MODE_TRUE
1.17337 ++MAINTAINER_MODE_FALSE
1.17338 ++MAINT
1.17339 ++NEWLIB_CFLAGS
1.17340 ++LDFLAGS
1.17341 ++ELIX_LEVEL_0_TRUE
1.17342 ++ELIX_LEVEL_0_FALSE
1.17343 ++ELIX_LEVEL_1_TRUE
1.17344 ++ELIX_LEVEL_1_FALSE
1.17345 ++ELIX_LEVEL_2_TRUE
1.17346 ++ELIX_LEVEL_2_FALSE
1.17347 ++ELIX_LEVEL_3_TRUE
1.17348 ++ELIX_LEVEL_3_FALSE
1.17349 ++ELIX_LEVEL_4_TRUE
1.17350 ++ELIX_LEVEL_4_FALSE
1.17351 ++USE_LIBTOOL_TRUE
1.17352 ++USE_LIBTOOL_FALSE
1.17353 ++OBJEXT
1.17354 ++oext
1.17355 ++aext
1.17356 ++libm_machine_dir
1.17357 ++machine_dir
1.17358 ++sys_dir
1.17359 ++LIBOBJS
1.17360 ++LTLIBOBJS'
1.17361 ++ac_subst_files=''
1.17362 ++ ac_precious_vars='build_alias
1.17363 ++host_alias
1.17364 ++target_alias'
1.17365 ++
1.17366 ++
1.17367 ++# Initialize some variables set by options.
1.17368 ++ac_init_help=
1.17369 ++ac_init_version=false
1.17370 ++# The variables have the same names as the options, with
1.17371 ++# dashes changed to underlines.
1.17372 ++cache_file=/dev/null
1.17373 ++exec_prefix=NONE
1.17374 ++no_create=
1.17375 ++no_recursion=
1.17376 ++prefix=NONE
1.17377 ++program_prefix=NONE
1.17378 ++program_suffix=NONE
1.17379 ++program_transform_name=s,x,x,
1.17380 ++silent=
1.17381 ++site=
1.17382 ++srcdir=
1.17383 ++verbose=
1.17384 ++x_includes=NONE
1.17385 ++x_libraries=NONE
1.17386 ++
1.17387 ++# Installation directory options.
1.17388 ++# These are left unexpanded so users can "make install exec_prefix=/foo"
1.17389 ++# and all the variables that are supposed to be based on exec_prefix
1.17390 ++# by default will actually change.
1.17391 ++# Use braces instead of parens because sh, perl, etc. also accept them.
1.17392 ++# (The list follows the same order as the GNU Coding Standards.)
1.17393 ++bindir='${exec_prefix}/bin'
1.17394 ++sbindir='${exec_prefix}/sbin'
1.17395 ++libexecdir='${exec_prefix}/libexec'
1.17396 ++datarootdir='${prefix}/share'
1.17397 ++datadir='${datarootdir}'
1.17398 ++sysconfdir='${prefix}/etc'
1.17399 ++sharedstatedir='${prefix}/com'
1.17400 ++localstatedir='${prefix}/var'
1.17401 ++includedir='${prefix}/include'
1.17402 ++oldincludedir='/usr/include'
1.17403 ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
1.17404 ++infodir='${datarootdir}/info'
1.17405 ++htmldir='${docdir}'
1.17406 ++dvidir='${docdir}'
1.17407 ++pdfdir='${docdir}'
1.17408 ++psdir='${docdir}'
1.17409 ++libdir='${exec_prefix}/lib'
1.17410 ++localedir='${datarootdir}/locale'
1.17411 ++mandir='${datarootdir}/man'
1.17412 ++
1.17413 ++ac_prev=
1.17414 ++ac_dashdash=
1.17415 ++for ac_option
1.17416 ++do
1.17417 ++ # If the previous option needs an argument, assign it.
1.17418 ++ if test -n "$ac_prev"; then
1.17419 ++ eval $ac_prev=\$ac_option
1.17420 ++ ac_prev=
1.17421 ++ continue
1.17422 ++ fi
1.17423 ++
1.17424 ++ case $ac_option in
1.17425 ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
1.17426 ++ *) ac_optarg=yes ;;
1.17427 ++ esac
1.17428 ++
1.17429 ++ # Accept the important Cygnus configure options, so we can diagnose typos.
1.17430 ++
1.17431 ++ case $ac_dashdash$ac_option in
1.17432 ++ --)
1.17433 ++ ac_dashdash=yes ;;
1.17434 ++
1.17435 ++ -bindir | --bindir | --bindi | --bind | --bin | --bi)
1.17436 ++ ac_prev=bindir ;;
1.17437 ++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
1.17438 ++ bindir=$ac_optarg ;;
1.17439 ++
1.17440 ++ -build | --build | --buil | --bui | --bu)
1.17441 ++ ac_prev=build_alias ;;
1.17442 ++ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
1.17443 ++ build_alias=$ac_optarg ;;
1.17444 ++
1.17445 ++ -cache-file | --cache-file | --cache-fil | --cache-fi \
1.17446 ++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
1.17447 ++ ac_prev=cache_file ;;
1.17448 ++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
1.17449 ++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
1.17450 ++ cache_file=$ac_optarg ;;
1.17451 ++
1.17452 ++ --config-cache | -C)
1.17453 ++ cache_file=config.cache ;;
1.17454 ++
1.17455 ++ -datadir | --datadir | --datadi | --datad)
1.17456 ++ ac_prev=datadir ;;
1.17457 ++ -datadir=* | --datadir=* | --datadi=* | --datad=*)
1.17458 ++ datadir=$ac_optarg ;;
1.17459 ++
1.17460 ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
1.17461 ++ | --dataroo | --dataro | --datar)
1.17462 ++ ac_prev=datarootdir ;;
1.17463 ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
1.17464 ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
1.17465 ++ datarootdir=$ac_optarg ;;
1.17466 ++
1.17467 ++ -disable-* | --disable-*)
1.17468 ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
1.17469 ++ # Reject names that are not valid shell variable names.
1.17470 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.17471 ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
1.17472 ++ { (exit 1); exit 1; }; }
1.17473 ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
1.17474 ++ eval enable_$ac_feature=no ;;
1.17475 ++
1.17476 ++ -docdir | --docdir | --docdi | --doc | --do)
1.17477 ++ ac_prev=docdir ;;
1.17478 ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
1.17479 ++ docdir=$ac_optarg ;;
1.17480 ++
1.17481 ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
1.17482 ++ ac_prev=dvidir ;;
1.17483 ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
1.17484 ++ dvidir=$ac_optarg ;;
1.17485 ++
1.17486 ++ -enable-* | --enable-*)
1.17487 ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
1.17488 ++ # Reject names that are not valid shell variable names.
1.17489 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.17490 ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
1.17491 ++ { (exit 1); exit 1; }; }
1.17492 ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
1.17493 ++ eval enable_$ac_feature=\$ac_optarg ;;
1.17494 ++
1.17495 ++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
1.17496 ++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
1.17497 ++ | --exec | --exe | --ex)
1.17498 ++ ac_prev=exec_prefix ;;
1.17499 ++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
1.17500 ++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
1.17501 ++ | --exec=* | --exe=* | --ex=*)
1.17502 ++ exec_prefix=$ac_optarg ;;
1.17503 ++
1.17504 ++ -gas | --gas | --ga | --g)
1.17505 ++ # Obsolete; use --with-gas.
1.17506 ++ with_gas=yes ;;
1.17507 ++
1.17508 ++ -help | --help | --hel | --he | -h)
1.17509 ++ ac_init_help=long ;;
1.17510 ++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
1.17511 ++ ac_init_help=recursive ;;
1.17512 ++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
1.17513 ++ ac_init_help=short ;;
1.17514 ++
1.17515 ++ -host | --host | --hos | --ho)
1.17516 ++ ac_prev=host_alias ;;
1.17517 ++ -host=* | --host=* | --hos=* | --ho=*)
1.17518 ++ host_alias=$ac_optarg ;;
1.17519 ++
1.17520 ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
1.17521 ++ ac_prev=htmldir ;;
1.17522 ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
1.17523 ++ | --ht=*)
1.17524 ++ htmldir=$ac_optarg ;;
1.17525 ++
1.17526 ++ -includedir | --includedir | --includedi | --included | --include \
1.17527 ++ | --includ | --inclu | --incl | --inc)
1.17528 ++ ac_prev=includedir ;;
1.17529 ++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
1.17530 ++ | --includ=* | --inclu=* | --incl=* | --inc=*)
1.17531 ++ includedir=$ac_optarg ;;
1.17532 ++
1.17533 ++ -infodir | --infodir | --infodi | --infod | --info | --inf)
1.17534 ++ ac_prev=infodir ;;
1.17535 ++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
1.17536 ++ infodir=$ac_optarg ;;
1.17537 ++
1.17538 ++ -libdir | --libdir | --libdi | --libd)
1.17539 ++ ac_prev=libdir ;;
1.17540 ++ -libdir=* | --libdir=* | --libdi=* | --libd=*)
1.17541 ++ libdir=$ac_optarg ;;
1.17542 ++
1.17543 ++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
1.17544 ++ | --libexe | --libex | --libe)
1.17545 ++ ac_prev=libexecdir ;;
1.17546 ++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
1.17547 ++ | --libexe=* | --libex=* | --libe=*)
1.17548 ++ libexecdir=$ac_optarg ;;
1.17549 ++
1.17550 ++ -localedir | --localedir | --localedi | --localed | --locale)
1.17551 ++ ac_prev=localedir ;;
1.17552 ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
1.17553 ++ localedir=$ac_optarg ;;
1.17554 ++
1.17555 ++ -localstatedir | --localstatedir | --localstatedi | --localstated \
1.17556 ++ | --localstate | --localstat | --localsta | --localst | --locals)
1.17557 ++ ac_prev=localstatedir ;;
1.17558 ++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
1.17559 ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
1.17560 ++ localstatedir=$ac_optarg ;;
1.17561 ++
1.17562 ++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
1.17563 ++ ac_prev=mandir ;;
1.17564 ++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
1.17565 ++ mandir=$ac_optarg ;;
1.17566 ++
1.17567 ++ -nfp | --nfp | --nf)
1.17568 ++ # Obsolete; use --without-fp.
1.17569 ++ with_fp=no ;;
1.17570 ++
1.17571 ++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
1.17572 ++ | --no-cr | --no-c | -n)
1.17573 ++ no_create=yes ;;
1.17574 ++
1.17575 ++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
1.17576 ++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
1.17577 ++ no_recursion=yes ;;
1.17578 ++
1.17579 ++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
1.17580 ++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
1.17581 ++ | --oldin | --oldi | --old | --ol | --o)
1.17582 ++ ac_prev=oldincludedir ;;
1.17583 ++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
1.17584 ++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
1.17585 ++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
1.17586 ++ oldincludedir=$ac_optarg ;;
1.17587 ++
1.17588 ++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
1.17589 ++ ac_prev=prefix ;;
1.17590 ++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
1.17591 ++ prefix=$ac_optarg ;;
1.17592 ++
1.17593 ++ -program-prefix | --program-prefix | --program-prefi | --program-pref \
1.17594 ++ | --program-pre | --program-pr | --program-p)
1.17595 ++ ac_prev=program_prefix ;;
1.17596 ++ -program-prefix=* | --program-prefix=* | --program-prefi=* \
1.17597 ++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
1.17598 ++ program_prefix=$ac_optarg ;;
1.17599 ++
1.17600 ++ -program-suffix | --program-suffix | --program-suffi | --program-suff \
1.17601 ++ | --program-suf | --program-su | --program-s)
1.17602 ++ ac_prev=program_suffix ;;
1.17603 ++ -program-suffix=* | --program-suffix=* | --program-suffi=* \
1.17604 ++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
1.17605 ++ program_suffix=$ac_optarg ;;
1.17606 ++
1.17607 ++ -program-transform-name | --program-transform-name \
1.17608 ++ | --program-transform-nam | --program-transform-na \
1.17609 ++ | --program-transform-n | --program-transform- \
1.17610 ++ | --program-transform | --program-transfor \
1.17611 ++ | --program-transfo | --program-transf \
1.17612 ++ | --program-trans | --program-tran \
1.17613 ++ | --progr-tra | --program-tr | --program-t)
1.17614 ++ ac_prev=program_transform_name ;;
1.17615 ++ -program-transform-name=* | --program-transform-name=* \
1.17616 ++ | --program-transform-nam=* | --program-transform-na=* \
1.17617 ++ | --program-transform-n=* | --program-transform-=* \
1.17618 ++ | --program-transform=* | --program-transfor=* \
1.17619 ++ | --program-transfo=* | --program-transf=* \
1.17620 ++ | --program-trans=* | --program-tran=* \
1.17621 ++ | --progr-tra=* | --program-tr=* | --program-t=*)
1.17622 ++ program_transform_name=$ac_optarg ;;
1.17623 ++
1.17624 ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
1.17625 ++ ac_prev=pdfdir ;;
1.17626 ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
1.17627 ++ pdfdir=$ac_optarg ;;
1.17628 ++
1.17629 ++ -psdir | --psdir | --psdi | --psd | --ps)
1.17630 ++ ac_prev=psdir ;;
1.17631 ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
1.17632 ++ psdir=$ac_optarg ;;
1.17633 ++
1.17634 ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.17635 ++ | -silent | --silent | --silen | --sile | --sil)
1.17636 ++ silent=yes ;;
1.17637 ++
1.17638 ++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
1.17639 ++ ac_prev=sbindir ;;
1.17640 ++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
1.17641 ++ | --sbi=* | --sb=*)
1.17642 ++ sbindir=$ac_optarg ;;
1.17643 ++
1.17644 ++ -sharedstatedir | --sharedstatedir | --sharedstatedi \
1.17645 ++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
1.17646 ++ | --sharedst | --shareds | --shared | --share | --shar \
1.17647 ++ | --sha | --sh)
1.17648 ++ ac_prev=sharedstatedir ;;
1.17649 ++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
1.17650 ++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
1.17651 ++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
1.17652 ++ | --sha=* | --sh=*)
1.17653 ++ sharedstatedir=$ac_optarg ;;
1.17654 ++
1.17655 ++ -site | --site | --sit)
1.17656 ++ ac_prev=site ;;
1.17657 ++ -site=* | --site=* | --sit=*)
1.17658 ++ site=$ac_optarg ;;
1.17659 ++
1.17660 ++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
1.17661 ++ ac_prev=srcdir ;;
1.17662 ++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
1.17663 ++ srcdir=$ac_optarg ;;
1.17664 ++
1.17665 ++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
1.17666 ++ | --syscon | --sysco | --sysc | --sys | --sy)
1.17667 ++ ac_prev=sysconfdir ;;
1.17668 ++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
1.17669 ++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
1.17670 ++ sysconfdir=$ac_optarg ;;
1.17671 ++
1.17672 ++ -target | --target | --targe | --targ | --tar | --ta | --t)
1.17673 ++ ac_prev=target_alias ;;
1.17674 ++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
1.17675 ++ target_alias=$ac_optarg ;;
1.17676 ++
1.17677 ++ -v | -verbose | --verbose | --verbos | --verbo | --verb)
1.17678 ++ verbose=yes ;;
1.17679 ++
1.17680 ++ -version | --version | --versio | --versi | --vers | -V)
1.17681 ++ ac_init_version=: ;;
1.17682 ++
1.17683 ++ -with-* | --with-*)
1.17684 ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
1.17685 ++ # Reject names that are not valid shell variable names.
1.17686 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.17687 ++ { echo "$as_me: error: invalid package name: $ac_package" >&2
1.17688 ++ { (exit 1); exit 1; }; }
1.17689 ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
1.17690 ++ eval with_$ac_package=\$ac_optarg ;;
1.17691 ++
1.17692 ++ -without-* | --without-*)
1.17693 ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
1.17694 ++ # Reject names that are not valid shell variable names.
1.17695 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.17696 ++ { echo "$as_me: error: invalid package name: $ac_package" >&2
1.17697 ++ { (exit 1); exit 1; }; }
1.17698 ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
1.17699 ++ eval with_$ac_package=no ;;
1.17700 ++
1.17701 ++ --x)
1.17702 ++ # Obsolete; use --with-x.
1.17703 ++ with_x=yes ;;
1.17704 ++
1.17705 ++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
1.17706 ++ | --x-incl | --x-inc | --x-in | --x-i)
1.17707 ++ ac_prev=x_includes ;;
1.17708 ++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
1.17709 ++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
1.17710 ++ x_includes=$ac_optarg ;;
1.17711 ++
1.17712 ++ -x-libraries | --x-libraries | --x-librarie | --x-librari \
1.17713 ++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
1.17714 ++ ac_prev=x_libraries ;;
1.17715 ++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
1.17716 ++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
1.17717 ++ x_libraries=$ac_optarg ;;
1.17718 ++
1.17719 ++ -*) { echo "$as_me: error: unrecognized option: $ac_option
1.17720 ++Try \`$0 --help' for more information." >&2
1.17721 ++ { (exit 1); exit 1; }; }
1.17722 ++ ;;
1.17723 ++
1.17724 ++ *=*)
1.17725 ++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
1.17726 ++ # Reject names that are not valid shell variable names.
1.17727 ++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
1.17728 ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
1.17729 ++ { (exit 1); exit 1; }; }
1.17730 ++ eval $ac_envvar=\$ac_optarg
1.17731 ++ export $ac_envvar ;;
1.17732 ++
1.17733 ++ *)
1.17734 ++ # FIXME: should be removed in autoconf 3.0.
1.17735 ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
1.17736 ++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.17737 ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
1.17738 ++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
1.17739 ++ ;;
1.17740 ++
1.17741 ++ esac
1.17742 ++done
1.17743 ++
1.17744 ++if test -n "$ac_prev"; then
1.17745 ++ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
1.17746 ++ { echo "$as_me: error: missing argument to $ac_option" >&2
1.17747 ++ { (exit 1); exit 1; }; }
1.17748 ++fi
1.17749 ++
1.17750 ++# Be sure to have absolute directory names.
1.17751 ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
1.17752 ++ datadir sysconfdir sharedstatedir localstatedir includedir \
1.17753 ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
1.17754 ++ libdir localedir mandir
1.17755 ++do
1.17756 ++ eval ac_val=\$$ac_var
1.17757 ++ case $ac_val in
1.17758 ++ [\\/$]* | ?:[\\/]* ) continue;;
1.17759 ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
1.17760 ++ esac
1.17761 ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
1.17762 ++ { (exit 1); exit 1; }; }
1.17763 ++done
1.17764 ++
1.17765 ++# There might be people who depend on the old broken behavior: `$host'
1.17766 ++# used to hold the argument of --host etc.
1.17767 ++# FIXME: To remove some day.
1.17768 ++build=$build_alias
1.17769 ++host=$host_alias
1.17770 ++target=$target_alias
1.17771 ++
1.17772 ++# FIXME: To remove some day.
1.17773 ++if test "x$host_alias" != x; then
1.17774 ++ if test "x$build_alias" = x; then
1.17775 ++ cross_compiling=maybe
1.17776 ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
1.17777 ++ If a cross compiler is detected then cross compile mode will be used." >&2
1.17778 ++ elif test "x$build_alias" != "x$host_alias"; then
1.17779 ++ cross_compiling=yes
1.17780 ++ fi
1.17781 ++fi
1.17782 ++
1.17783 ++ac_tool_prefix=
1.17784 ++test -n "$host_alias" && ac_tool_prefix=$host_alias-
1.17785 ++
1.17786 ++test "$silent" = yes && exec 6>/dev/null
1.17787 ++
1.17788 ++
1.17789 ++ac_pwd=`pwd` && test -n "$ac_pwd" &&
1.17790 ++ac_ls_di=`ls -di .` &&
1.17791 ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
1.17792 ++ { echo "$as_me: error: Working directory cannot be determined" >&2
1.17793 ++ { (exit 1); exit 1; }; }
1.17794 ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
1.17795 ++ { echo "$as_me: error: pwd does not report name of working directory" >&2
1.17796 ++ { (exit 1); exit 1; }; }
1.17797 ++
1.17798 ++
1.17799 ++# Find the source files, if location was not specified.
1.17800 ++if test -z "$srcdir"; then
1.17801 ++ ac_srcdir_defaulted=yes
1.17802 ++ # Try the directory containing this script, then the parent directory.
1.17803 ++ ac_confdir=`$as_dirname -- "$0" ||
1.17804 ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.17805 ++ X"$0" : 'X\(//\)[^/]' \| \
1.17806 ++ X"$0" : 'X\(//\)$' \| \
1.17807 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.17808 ++echo X"$0" |
1.17809 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.17810 ++ s//\1/
1.17811 ++ q
1.17812 ++ }
1.17813 ++ /^X\(\/\/\)[^/].*/{
1.17814 ++ s//\1/
1.17815 ++ q
1.17816 ++ }
1.17817 ++ /^X\(\/\/\)$/{
1.17818 ++ s//\1/
1.17819 ++ q
1.17820 ++ }
1.17821 ++ /^X\(\/\).*/{
1.17822 ++ s//\1/
1.17823 ++ q
1.17824 ++ }
1.17825 ++ s/.*/./; q'`
1.17826 ++ srcdir=$ac_confdir
1.17827 ++ if test ! -r "$srcdir/$ac_unique_file"; then
1.17828 ++ srcdir=..
1.17829 ++ fi
1.17830 ++else
1.17831 ++ ac_srcdir_defaulted=no
1.17832 ++fi
1.17833 ++if test ! -r "$srcdir/$ac_unique_file"; then
1.17834 ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
1.17835 ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
1.17836 ++ { (exit 1); exit 1; }; }
1.17837 ++fi
1.17838 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
1.17839 ++ac_abs_confdir=`(
1.17840 ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
1.17841 ++ { (exit 1); exit 1; }; }
1.17842 ++ pwd)`
1.17843 ++# When building in place, set srcdir=.
1.17844 ++if test "$ac_abs_confdir" = "$ac_pwd"; then
1.17845 ++ srcdir=.
1.17846 ++fi
1.17847 ++# Remove unnecessary trailing slashes from srcdir.
1.17848 ++# Double slashes in file names in object file debugging info
1.17849 ++# mess up M-x gdb in Emacs.
1.17850 ++case $srcdir in
1.17851 ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
1.17852 ++esac
1.17853 ++for ac_var in $ac_precious_vars; do
1.17854 ++ eval ac_env_${ac_var}_set=\${${ac_var}+set}
1.17855 ++ eval ac_env_${ac_var}_value=\$${ac_var}
1.17856 ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
1.17857 ++ eval ac_cv_env_${ac_var}_value=\$${ac_var}
1.17858 ++done
1.17859 ++
1.17860 ++#
1.17861 ++# Report the --help message.
1.17862 ++#
1.17863 ++if test "$ac_init_help" = "long"; then
1.17864 ++ # Omit some internal or obsolete options to make the list less imposing.
1.17865 ++ # This message is too long to be a string in the A/UX 3.1 sh.
1.17866 ++ cat <<_ACEOF
1.17867 ++\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems.
1.17868 ++
1.17869 ++Usage: $0 [OPTION]... [VAR=VALUE]...
1.17870 ++
1.17871 ++To assign environment variables (e.g., CC, CFLAGS...), specify them as
1.17872 ++VAR=VALUE. See below for descriptions of some of the useful variables.
1.17873 ++
1.17874 ++Defaults for the options are specified in brackets.
1.17875 ++
1.17876 ++Configuration:
1.17877 ++ -h, --help display this help and exit
1.17878 ++ --help=short display options specific to this package
1.17879 ++ --help=recursive display the short help of all the included packages
1.17880 ++ -V, --version display version information and exit
1.17881 ++ -q, --quiet, --silent do not print \`checking...' messages
1.17882 ++ --cache-file=FILE cache test results in FILE [disabled]
1.17883 ++ -C, --config-cache alias for \`--cache-file=config.cache'
1.17884 ++ -n, --no-create do not create output files
1.17885 ++ --srcdir=DIR find the sources in DIR [configure dir or \`..']
1.17886 ++
1.17887 ++Installation directories:
1.17888 ++ --prefix=PREFIX install architecture-independent files in PREFIX
1.17889 ++ [$ac_default_prefix]
1.17890 ++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
1.17891 ++ [PREFIX]
1.17892 ++
1.17893 ++By default, \`make install' will install all the files in
1.17894 ++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
1.17895 ++an installation prefix other than \`$ac_default_prefix' using \`--prefix',
1.17896 ++for instance \`--prefix=\$HOME'.
1.17897 ++
1.17898 ++For better control, use the options below.
1.17899 ++
1.17900 ++Fine tuning of the installation directories:
1.17901 ++ --bindir=DIR user executables [EPREFIX/bin]
1.17902 ++ --sbindir=DIR system admin executables [EPREFIX/sbin]
1.17903 ++ --libexecdir=DIR program executables [EPREFIX/libexec]
1.17904 ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
1.17905 ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
1.17906 ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
1.17907 ++ --libdir=DIR object code libraries [EPREFIX/lib]
1.17908 ++ --includedir=DIR C header files [PREFIX/include]
1.17909 ++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
1.17910 ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
1.17911 ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
1.17912 ++ --infodir=DIR info documentation [DATAROOTDIR/info]
1.17913 ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
1.17914 ++ --mandir=DIR man documentation [DATAROOTDIR/man]
1.17915 ++ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib]
1.17916 ++ --htmldir=DIR html documentation [DOCDIR]
1.17917 ++ --dvidir=DIR dvi documentation [DOCDIR]
1.17918 ++ --pdfdir=DIR pdf documentation [DOCDIR]
1.17919 ++ --psdir=DIR ps documentation [DOCDIR]
1.17920 ++_ACEOF
1.17921 ++
1.17922 ++ cat <<\_ACEOF
1.17923 ++
1.17924 ++Program names:
1.17925 ++ --program-prefix=PREFIX prepend PREFIX to installed program names
1.17926 ++ --program-suffix=SUFFIX append SUFFIX to installed program names
1.17927 ++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
1.17928 ++
1.17929 ++System types:
1.17930 ++ --build=BUILD configure for building on BUILD [guessed]
1.17931 ++ --host=HOST cross-compile to build programs to run on HOST [BUILD]
1.17932 ++ --target=TARGET configure for building compilers for TARGET [HOST]
1.17933 ++_ACEOF
1.17934 ++fi
1.17935 ++
1.17936 ++if test -n "$ac_init_help"; then
1.17937 ++ case $ac_init_help in
1.17938 ++ short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";;
1.17939 ++ esac
1.17940 ++ cat <<\_ACEOF
1.17941 ++
1.17942 ++Optional Features:
1.17943 ++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
1.17944 ++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
1.17945 ++ --enable-multilib build many library versions (default)
1.17946 ++ --enable-target-optspace optimize for space
1.17947 ++ --enable-malloc-debugging indicate malloc debugging requested
1.17948 ++ --enable-newlib-multithread enable support for multiple threads
1.17949 ++ --enable-newlib-iconv enable iconv library support
1.17950 ++ --enable-newlib-elix-level supply desired elix library level (1-4)
1.17951 ++ --disable-newlib-io-float disable printf/scanf family float support
1.17952 ++ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls
1.17953 ++ --enable-maintainer-mode enable make rules and dependencies not useful
1.17954 ++ (and sometimes confusing) to the casual installer
1.17955 ++
1.17956 ++_ACEOF
1.17957 ++ac_status=$?
1.17958 ++fi
1.17959 ++
1.17960 ++if test "$ac_init_help" = "recursive"; then
1.17961 ++ # If there are subdirs, report their specific --help.
1.17962 ++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
1.17963 ++ test -d "$ac_dir" || continue
1.17964 ++ ac_builddir=.
1.17965 ++
1.17966 ++case "$ac_dir" in
1.17967 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.17968 ++*)
1.17969 ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.17970 ++ # A ".." for each directory in $ac_dir_suffix.
1.17971 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.17972 ++ case $ac_top_builddir_sub in
1.17973 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.17974 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.17975 ++ esac ;;
1.17976 ++esac
1.17977 ++ac_abs_top_builddir=$ac_pwd
1.17978 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.17979 ++# for backward compatibility:
1.17980 ++ac_top_builddir=$ac_top_build_prefix
1.17981 ++
1.17982 ++case $srcdir in
1.17983 ++ .) # We are building in place.
1.17984 ++ ac_srcdir=.
1.17985 ++ ac_top_srcdir=$ac_top_builddir_sub
1.17986 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.17987 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.17988 ++ ac_srcdir=$srcdir$ac_dir_suffix;
1.17989 ++ ac_top_srcdir=$srcdir
1.17990 ++ ac_abs_top_srcdir=$srcdir ;;
1.17991 ++ *) # Relative name.
1.17992 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.17993 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.17994 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.17995 ++esac
1.17996 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.17997 ++
1.17998 ++ cd "$ac_dir" || { ac_status=$?; continue; }
1.17999 ++ # Check for guested configure.
1.18000 ++ if test -f "$ac_srcdir/configure.gnu"; then
1.18001 ++ echo &&
1.18002 ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
1.18003 ++ elif test -f "$ac_srcdir/configure"; then
1.18004 ++ echo &&
1.18005 ++ $SHELL "$ac_srcdir/configure" --help=recursive
1.18006 ++ else
1.18007 ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
1.18008 ++ fi || ac_status=$?
1.18009 ++ cd "$ac_pwd" || { ac_status=$?; break; }
1.18010 ++ done
1.18011 ++fi
1.18012 ++
1.18013 ++test -n "$ac_init_help" && exit $ac_status
1.18014 ++if $ac_init_version; then
1.18015 ++ cat <<\_ACEOF
1.18016 ++newlib configure NEWLIB_VERSION
1.18017 ++generated by GNU Autoconf 2.61
1.18018 ++
1.18019 ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
1.18020 ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.18021 ++This configure script is free software; the Free Software Foundation
1.18022 ++gives unlimited permission to copy, distribute and modify it.
1.18023 ++_ACEOF
1.18024 ++ exit
1.18025 ++fi
1.18026 ++cat >config.log <<_ACEOF
1.18027 ++This file contains any messages produced by compilers while
1.18028 ++running configure, to aid debugging if configure makes a mistake.
1.18029 ++
1.18030 ++It was created by newlib $as_me NEWLIB_VERSION, which was
1.18031 ++generated by GNU Autoconf 2.61. Invocation command line was
1.18032 ++
1.18033 ++ $ $0 $@
1.18034 ++
1.18035 ++_ACEOF
1.18036 ++exec 5>>config.log
1.18037 ++{
1.18038 ++cat <<_ASUNAME
1.18039 ++## --------- ##
1.18040 ++## Platform. ##
1.18041 ++## --------- ##
1.18042 ++
1.18043 ++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
1.18044 ++uname -m = `(uname -m) 2>/dev/null || echo unknown`
1.18045 ++uname -r = `(uname -r) 2>/dev/null || echo unknown`
1.18046 ++uname -s = `(uname -s) 2>/dev/null || echo unknown`
1.18047 ++uname -v = `(uname -v) 2>/dev/null || echo unknown`
1.18048 ++
1.18049 ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
1.18050 ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
1.18051 ++
1.18052 ++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
1.18053 ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
1.18054 ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
1.18055 ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
1.18056 ++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
1.18057 ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
1.18058 ++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
1.18059 ++
1.18060 ++_ASUNAME
1.18061 ++
1.18062 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.18063 ++for as_dir in $PATH
1.18064 ++do
1.18065 ++ IFS=$as_save_IFS
1.18066 ++ test -z "$as_dir" && as_dir=.
1.18067 ++ echo "PATH: $as_dir"
1.18068 ++done
1.18069 ++IFS=$as_save_IFS
1.18070 ++
1.18071 ++} >&5
1.18072 ++
1.18073 ++cat >&5 <<_ACEOF
1.18074 ++
1.18075 ++
1.18076 ++## ----------- ##
1.18077 ++## Core tests. ##
1.18078 ++## ----------- ##
1.18079 ++
1.18080 ++_ACEOF
1.18081 ++
1.18082 ++
1.18083 ++# Keep a trace of the command line.
1.18084 ++# Strip out --no-create and --no-recursion so they do not pile up.
1.18085 ++# Strip out --silent because we don't want to record it for future runs.
1.18086 ++# Also quote any args containing shell meta-characters.
1.18087 ++# Make two passes to allow for proper duplicate-argument suppression.
1.18088 ++ac_configure_args=
1.18089 ++ac_configure_args0=
1.18090 ++ac_configure_args1=
1.18091 ++ac_must_keep_next=false
1.18092 ++for ac_pass in 1 2
1.18093 ++do
1.18094 ++ for ac_arg
1.18095 ++ do
1.18096 ++ case $ac_arg in
1.18097 ++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
1.18098 ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.18099 ++ | -silent | --silent | --silen | --sile | --sil)
1.18100 ++ continue ;;
1.18101 ++ *\'*)
1.18102 ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
1.18103 ++ esac
1.18104 ++ case $ac_pass in
1.18105 ++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
1.18106 ++ 2)
1.18107 ++ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
1.18108 ++ if test $ac_must_keep_next = true; then
1.18109 ++ ac_must_keep_next=false # Got value, back to normal.
1.18110 ++ else
1.18111 ++ case $ac_arg in
1.18112 ++ *=* | --config-cache | -C | -disable-* | --disable-* \
1.18113 ++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
1.18114 ++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
1.18115 ++ | -with-* | --with-* | -without-* | --without-* | --x)
1.18116 ++ case "$ac_configure_args0 " in
1.18117 ++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
1.18118 ++ esac
1.18119 ++ ;;
1.18120 ++ -* ) ac_must_keep_next=true ;;
1.18121 ++ esac
1.18122 ++ fi
1.18123 ++ ac_configure_args="$ac_configure_args '$ac_arg'"
1.18124 ++ ;;
1.18125 ++ esac
1.18126 ++ done
1.18127 ++done
1.18128 ++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
1.18129 ++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
1.18130 ++
1.18131 ++# When interrupted or exit'd, cleanup temporary files, and complete
1.18132 ++# config.log. We remove comments because anyway the quotes in there
1.18133 ++# would cause problems or look ugly.
1.18134 ++# WARNING: Use '\'' to represent an apostrophe within the trap.
1.18135 ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
1.18136 ++trap 'exit_status=$?
1.18137 ++ # Save into config.log some information that might help in debugging.
1.18138 ++ {
1.18139 ++ echo
1.18140 ++
1.18141 ++ cat <<\_ASBOX
1.18142 ++## ---------------- ##
1.18143 ++## Cache variables. ##
1.18144 ++## ---------------- ##
1.18145 ++_ASBOX
1.18146 ++ echo
1.18147 ++ # The following way of writing the cache mishandles newlines in values,
1.18148 ++(
1.18149 ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
1.18150 ++ eval ac_val=\$$ac_var
1.18151 ++ case $ac_val in #(
1.18152 ++ *${as_nl}*)
1.18153 ++ case $ac_var in #(
1.18154 ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
1.18155 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
1.18156 ++ esac
1.18157 ++ case $ac_var in #(
1.18158 ++ _ | IFS | as_nl) ;; #(
1.18159 ++ *) $as_unset $ac_var ;;
1.18160 ++ esac ;;
1.18161 ++ esac
1.18162 ++ done
1.18163 ++ (set) 2>&1 |
1.18164 ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
1.18165 ++ *${as_nl}ac_space=\ *)
1.18166 ++ sed -n \
1.18167 ++ "s/'\''/'\''\\\\'\'''\''/g;
1.18168 ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
1.18169 ++ ;; #(
1.18170 ++ *)
1.18171 ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
1.18172 ++ ;;
1.18173 ++ esac |
1.18174 ++ sort
1.18175 ++)
1.18176 ++ echo
1.18177 ++
1.18178 ++ cat <<\_ASBOX
1.18179 ++## ----------------- ##
1.18180 ++## Output variables. ##
1.18181 ++## ----------------- ##
1.18182 ++_ASBOX
1.18183 ++ echo
1.18184 ++ for ac_var in $ac_subst_vars
1.18185 ++ do
1.18186 ++ eval ac_val=\$$ac_var
1.18187 ++ case $ac_val in
1.18188 ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
1.18189 ++ esac
1.18190 ++ echo "$ac_var='\''$ac_val'\''"
1.18191 ++ done | sort
1.18192 ++ echo
1.18193 ++
1.18194 ++ if test -n "$ac_subst_files"; then
1.18195 ++ cat <<\_ASBOX
1.18196 ++## ------------------- ##
1.18197 ++## File substitutions. ##
1.18198 ++## ------------------- ##
1.18199 ++_ASBOX
1.18200 ++ echo
1.18201 ++ for ac_var in $ac_subst_files
1.18202 ++ do
1.18203 ++ eval ac_val=\$$ac_var
1.18204 ++ case $ac_val in
1.18205 ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
1.18206 ++ esac
1.18207 ++ echo "$ac_var='\''$ac_val'\''"
1.18208 ++ done | sort
1.18209 ++ echo
1.18210 ++ fi
1.18211 ++
1.18212 ++ if test -s confdefs.h; then
1.18213 ++ cat <<\_ASBOX
1.18214 ++## ----------- ##
1.18215 ++## confdefs.h. ##
1.18216 ++## ----------- ##
1.18217 ++_ASBOX
1.18218 ++ echo
1.18219 ++ cat confdefs.h
1.18220 ++ echo
1.18221 ++ fi
1.18222 ++ test "$ac_signal" != 0 &&
1.18223 ++ echo "$as_me: caught signal $ac_signal"
1.18224 ++ echo "$as_me: exit $exit_status"
1.18225 ++ } >&5
1.18226 ++ rm -f core *.core core.conftest.* &&
1.18227 ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
1.18228 ++ exit $exit_status
1.18229 ++' 0
1.18230 ++for ac_signal in 1 2 13 15; do
1.18231 ++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
1.18232 ++done
1.18233 ++ac_signal=0
1.18234 ++
1.18235 ++# confdefs.h avoids OS command line length limits that DEFS can exceed.
1.18236 ++rm -f -r conftest* confdefs.h
1.18237 ++
1.18238 ++# Predefined preprocessor variables.
1.18239 ++
1.18240 ++cat >>confdefs.h <<_ACEOF
1.18241 ++#define PACKAGE_NAME "$PACKAGE_NAME"
1.18242 ++_ACEOF
1.18243 ++
1.18244 ++
1.18245 ++cat >>confdefs.h <<_ACEOF
1.18246 ++#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
1.18247 ++_ACEOF
1.18248 ++
1.18249 ++
1.18250 ++cat >>confdefs.h <<_ACEOF
1.18251 ++#define PACKAGE_VERSION "$PACKAGE_VERSION"
1.18252 ++_ACEOF
1.18253 ++
1.18254 ++
1.18255 ++cat >>confdefs.h <<_ACEOF
1.18256 ++#define PACKAGE_STRING "$PACKAGE_STRING"
1.18257 ++_ACEOF
1.18258 ++
1.18259 ++
1.18260 ++cat >>confdefs.h <<_ACEOF
1.18261 ++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
1.18262 ++_ACEOF
1.18263 ++
1.18264 ++
1.18265 ++# Let the site file select an alternate cache file if it wants to.
1.18266 ++# Prefer explicitly selected file to automatically selected ones.
1.18267 ++if test -n "$CONFIG_SITE"; then
1.18268 ++ set x "$CONFIG_SITE"
1.18269 ++elif test "x$prefix" != xNONE; then
1.18270 ++ set x "$prefix/share/config.site" "$prefix/etc/config.site"
1.18271 ++else
1.18272 ++ set x "$ac_default_prefix/share/config.site" \
1.18273 ++ "$ac_default_prefix/etc/config.site"
1.18274 ++fi
1.18275 ++shift
1.18276 ++for ac_site_file
1.18277 ++do
1.18278 ++ if test -r "$ac_site_file"; then
1.18279 ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
1.18280 ++echo "$as_me: loading site script $ac_site_file" >&6;}
1.18281 ++ sed 's/^/| /' "$ac_site_file" >&5
1.18282 ++ . "$ac_site_file"
1.18283 ++ fi
1.18284 ++done
1.18285 ++
1.18286 ++if test -r "$cache_file"; then
1.18287 ++ # Some versions of bash will fail to source /dev/null (special
1.18288 ++ # files actually), so we avoid doing that.
1.18289 ++ if test -f "$cache_file"; then
1.18290 ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
1.18291 ++echo "$as_me: loading cache $cache_file" >&6;}
1.18292 ++ case $cache_file in
1.18293 ++ [\\/]* | ?:[\\/]* ) . "$cache_file";;
1.18294 ++ *) . "./$cache_file";;
1.18295 ++ esac
1.18296 ++ fi
1.18297 ++else
1.18298 ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
1.18299 ++echo "$as_me: creating cache $cache_file" >&6;}
1.18300 ++ >$cache_file
1.18301 ++fi
1.18302 ++
1.18303 ++# Check that the precious variables saved in the cache have kept the same
1.18304 ++# value.
1.18305 ++ac_cache_corrupted=false
1.18306 ++for ac_var in $ac_precious_vars; do
1.18307 ++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
1.18308 ++ eval ac_new_set=\$ac_env_${ac_var}_set
1.18309 ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value
1.18310 ++ eval ac_new_val=\$ac_env_${ac_var}_value
1.18311 ++ case $ac_old_set,$ac_new_set in
1.18312 ++ set,)
1.18313 ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
1.18314 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
1.18315 ++ ac_cache_corrupted=: ;;
1.18316 ++ ,set)
1.18317 ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
1.18318 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
1.18319 ++ ac_cache_corrupted=: ;;
1.18320 ++ ,);;
1.18321 ++ *)
1.18322 ++ if test "x$ac_old_val" != "x$ac_new_val"; then
1.18323 ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
1.18324 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
1.18325 ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
1.18326 ++echo "$as_me: former value: $ac_old_val" >&2;}
1.18327 ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
1.18328 ++echo "$as_me: current value: $ac_new_val" >&2;}
1.18329 ++ ac_cache_corrupted=:
1.18330 ++ fi;;
1.18331 ++ esac
1.18332 ++ # Pass precious variables to config.status.
1.18333 ++ if test "$ac_new_set" = set; then
1.18334 ++ case $ac_new_val in
1.18335 ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1.18336 ++ *) ac_arg=$ac_var=$ac_new_val ;;
1.18337 ++ esac
1.18338 ++ case " $ac_configure_args " in
1.18339 ++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
1.18340 ++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
1.18341 ++ esac
1.18342 ++ fi
1.18343 ++done
1.18344 ++if $ac_cache_corrupted; then
1.18345 ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
1.18346 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;}
1.18347 ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
1.18348 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
1.18349 ++ { (exit 1); exit 1; }; }
1.18350 ++fi
1.18351 ++
1.18352 ++
1.18353 ++
1.18354 ++
1.18355 ++
1.18356 ++
1.18357 ++
1.18358 ++
1.18359 ++
1.18360 ++
1.18361 ++
1.18362 ++
1.18363 ++
1.18364 ++
1.18365 ++
1.18366 ++
1.18367 ++
1.18368 ++
1.18369 ++
1.18370 ++
1.18371 ++
1.18372 ++
1.18373 ++
1.18374 ++
1.18375 ++
1.18376 ++ac_ext=c
1.18377 ++ac_cpp='$CPP $CPPFLAGS'
1.18378 ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.18379 ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1.18380 ++ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.18381 ++
1.18382 ++
1.18383 ++
1.18384 ++ac_aux_dir=
1.18385 ++for ac_dir in ../../../.. "$srcdir"/../../../..; do
1.18386 ++ if test -f "$ac_dir/install-sh"; then
1.18387 ++ ac_aux_dir=$ac_dir
1.18388 ++ ac_install_sh="$ac_aux_dir/install-sh -c"
1.18389 ++ break
1.18390 ++ elif test -f "$ac_dir/install.sh"; then
1.18391 ++ ac_aux_dir=$ac_dir
1.18392 ++ ac_install_sh="$ac_aux_dir/install.sh -c"
1.18393 ++ break
1.18394 ++ elif test -f "$ac_dir/shtool"; then
1.18395 ++ ac_aux_dir=$ac_dir
1.18396 ++ ac_install_sh="$ac_aux_dir/shtool install -c"
1.18397 ++ break
1.18398 ++ fi
1.18399 ++done
1.18400 ++if test -z "$ac_aux_dir"; then
1.18401 ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5
1.18402 ++echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;}
1.18403 ++ { (exit 1); exit 1; }; }
1.18404 ++fi
1.18405 ++
1.18406 ++# These three variables are undocumented and unsupported,
1.18407 ++# and are intended to be withdrawn in a future Autoconf release.
1.18408 ++# They can cause serious problems if a builder's source tree is in a directory
1.18409 ++# whose full name contains unusual characters.
1.18410 ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
1.18411 ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
1.18412 ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
1.18413 ++
1.18414 ++
1.18415 ++
1.18416 ++# Make sure we can run config.sub.
1.18417 ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
1.18418 ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
1.18419 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
1.18420 ++ { (exit 1); exit 1; }; }
1.18421 ++
1.18422 ++{ echo "$as_me:$LINENO: checking build system type" >&5
1.18423 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
1.18424 ++if test "${ac_cv_build+set}" = set; then
1.18425 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.18426 ++else
1.18427 ++ ac_build_alias=$build_alias
1.18428 ++test "x$ac_build_alias" = x &&
1.18429 ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
1.18430 ++test "x$ac_build_alias" = x &&
1.18431 ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
1.18432 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
1.18433 ++ { (exit 1); exit 1; }; }
1.18434 ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
1.18435 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
1.18436 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
1.18437 ++ { (exit 1); exit 1; }; }
1.18438 ++
1.18439 ++fi
1.18440 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1.18441 ++echo "${ECHO_T}$ac_cv_build" >&6; }
1.18442 ++case $ac_cv_build in
1.18443 ++*-*-*) ;;
1.18444 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
1.18445 ++echo "$as_me: error: invalid value of canonical build" >&2;}
1.18446 ++ { (exit 1); exit 1; }; };;
1.18447 ++esac
1.18448 ++build=$ac_cv_build
1.18449 ++ac_save_IFS=$IFS; IFS='-'
1.18450 ++set x $ac_cv_build
1.18451 ++shift
1.18452 ++build_cpu=$1
1.18453 ++build_vendor=$2
1.18454 ++shift; shift
1.18455 ++# Remember, the first character of IFS is used to create $*,
1.18456 ++# except with old shells:
1.18457 ++build_os=$*
1.18458 ++IFS=$ac_save_IFS
1.18459 ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
1.18460 ++
1.18461 ++
1.18462 ++{ echo "$as_me:$LINENO: checking host system type" >&5
1.18463 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
1.18464 ++if test "${ac_cv_host+set}" = set; then
1.18465 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.18466 ++else
1.18467 ++ if test "x$host_alias" = x; then
1.18468 ++ ac_cv_host=$ac_cv_build
1.18469 ++else
1.18470 ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
1.18471 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
1.18472 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
1.18473 ++ { (exit 1); exit 1; }; }
1.18474 ++fi
1.18475 ++
1.18476 ++fi
1.18477 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1.18478 ++echo "${ECHO_T}$ac_cv_host" >&6; }
1.18479 ++case $ac_cv_host in
1.18480 ++*-*-*) ;;
1.18481 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
1.18482 ++echo "$as_me: error: invalid value of canonical host" >&2;}
1.18483 ++ { (exit 1); exit 1; }; };;
1.18484 ++esac
1.18485 ++host=$ac_cv_host
1.18486 ++ac_save_IFS=$IFS; IFS='-'
1.18487 ++set x $ac_cv_host
1.18488 ++shift
1.18489 ++host_cpu=$1
1.18490 ++host_vendor=$2
1.18491 ++shift; shift
1.18492 ++# Remember, the first character of IFS is used to create $*,
1.18493 ++# except with old shells:
1.18494 ++host_os=$*
1.18495 ++IFS=$ac_save_IFS
1.18496 ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
1.18497 ++
1.18498 ++
1.18499 ++am__api_version="1.4"
1.18500 ++# Find a good install program. We prefer a C program (faster),
1.18501 ++# so one script is as good as another. But avoid the broken or
1.18502 ++# incompatible versions:
1.18503 ++# SysV /etc/install, /usr/sbin/install
1.18504 ++# SunOS /usr/etc/install
1.18505 ++# IRIX /sbin/install
1.18506 ++# AIX /bin/install
1.18507 ++# AmigaOS /C/install, which installs bootblocks on floppy discs
1.18508 ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
1.18509 ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
1.18510 ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1.18511 ++# OS/2's system install, which has a completely different semantic
1.18512 ++# ./install, which can be erroneously created by make from ./install.sh.
1.18513 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.18514 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
1.18515 ++if test -z "$INSTALL"; then
1.18516 ++if test "${ac_cv_path_install+set}" = set; then
1.18517 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.18518 ++else
1.18519 ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.18520 ++for as_dir in $PATH
1.18521 ++do
1.18522 ++ IFS=$as_save_IFS
1.18523 ++ test -z "$as_dir" && as_dir=.
1.18524 ++ # Account for people who put trailing slashes in PATH elements.
1.18525 ++case $as_dir/ in
1.18526 ++ ./ | .// | /cC/* | \
1.18527 ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
1.18528 ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
1.18529 ++ /usr/ucb/* ) ;;
1.18530 ++ *)
1.18531 ++ # OSF1 and SCO ODT 3.0 have their own names for install.
1.18532 ++ # Don't use installbsd from OSF since it installs stuff as root
1.18533 ++ # by default.
1.18534 ++ for ac_prog in ginstall scoinst install; do
1.18535 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.18536 ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
1.18537 ++ if test $ac_prog = install &&
1.18538 ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.18539 ++ # AIX install. It has an incompatible calling convention.
1.18540 ++ :
1.18541 ++ elif test $ac_prog = install &&
1.18542 ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.18543 ++ # program-specific install script used by HP pwplus--don't use.
1.18544 ++ :
1.18545 ++ else
1.18546 ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
1.18547 ++ break 3
1.18548 ++ fi
1.18549 ++ fi
1.18550 ++ done
1.18551 ++ done
1.18552 ++ ;;
1.18553 ++esac
1.18554 ++done
1.18555 ++IFS=$as_save_IFS
1.18556 ++
1.18557 ++
1.18558 ++fi
1.18559 ++ if test "${ac_cv_path_install+set}" = set; then
1.18560 ++ INSTALL=$ac_cv_path_install
1.18561 ++ else
1.18562 ++ # As a last resort, use the slow shell script. Don't cache a
1.18563 ++ # value for INSTALL within a source directory, because that will
1.18564 ++ # break other packages using the cache if that directory is
1.18565 ++ # removed, or if the value is a relative name.
1.18566 ++ INSTALL=$ac_install_sh
1.18567 ++ fi
1.18568 ++fi
1.18569 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
1.18570 ++echo "${ECHO_T}$INSTALL" >&6; }
1.18571 ++
1.18572 ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1.18573 ++# It thinks the first close brace ends the variable substitution.
1.18574 ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
1.18575 ++
1.18576 ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
1.18577 ++
1.18578 ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1.18579 ++
1.18580 ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
1.18581 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
1.18582 ++# Just in case
1.18583 ++sleep 1
1.18584 ++echo timestamp > conftestfile
1.18585 ++# Do `set' in a subshell so we don't clobber the current shell's
1.18586 ++# arguments. Must try -L first in case configure is actually a
1.18587 ++# symlink; some systems play weird games with the mod time of symlinks
1.18588 ++# (eg FreeBSD returns the mod time of the symlink's containing
1.18589 ++# directory).
1.18590 ++if (
1.18591 ++ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
1.18592 ++ if test "$*" = "X"; then
1.18593 ++ # -L didn't work.
1.18594 ++ set X `ls -t $srcdir/configure conftestfile`
1.18595 ++ fi
1.18596 ++ if test "$*" != "X $srcdir/configure conftestfile" \
1.18597 ++ && test "$*" != "X conftestfile $srcdir/configure"; then
1.18598 ++
1.18599 ++ # If neither matched, then we have a broken ls. This can happen
1.18600 ++ # if, for instance, CONFIG_SHELL is bash and it inherits a
1.18601 ++ # broken ls alias from the environment. This has actually
1.18602 ++ # happened. Such a system could not be considered "sane".
1.18603 ++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
1.18604 ++alias in your environment" >&5
1.18605 ++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
1.18606 ++alias in your environment" >&2;}
1.18607 ++ { (exit 1); exit 1; }; }
1.18608 ++ fi
1.18609 ++
1.18610 ++ test "$2" = conftestfile
1.18611 ++ )
1.18612 ++then
1.18613 ++ # Ok.
1.18614 ++ :
1.18615 ++else
1.18616 ++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
1.18617 ++Check your system clock" >&5
1.18618 ++echo "$as_me: error: newly created file is older than distributed files!
1.18619 ++Check your system clock" >&2;}
1.18620 ++ { (exit 1); exit 1; }; }
1.18621 ++fi
1.18622 ++rm -f conftest*
1.18623 ++{ echo "$as_me:$LINENO: result: yes" >&5
1.18624 ++echo "${ECHO_T}yes" >&6; }
1.18625 ++test "$program_prefix" != NONE &&
1.18626 ++ program_transform_name="s&^&$program_prefix&;$program_transform_name"
1.18627 ++# Use a double $ so make ignores it.
1.18628 ++test "$program_suffix" != NONE &&
1.18629 ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
1.18630 ++# Double any \ or $. echo might interpret backslashes.
1.18631 ++# By default was `s,x,x', remove it if useless.
1.18632 ++cat <<\_ACEOF >conftest.sed
1.18633 ++s/[\\$]/&&/g;s/;s,x,x,$//
1.18634 ++_ACEOF
1.18635 ++program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
1.18636 ++rm -f conftest.sed
1.18637 ++
1.18638 ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
1.18639 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
1.18640 ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
1.18641 ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
1.18642 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.18643 ++else
1.18644 ++ cat >conftest.make <<\_ACEOF
1.18645 ++SHELL = /bin/sh
1.18646 ++all:
1.18647 ++ @echo '@@@%%%=$(MAKE)=@@@%%%'
1.18648 ++_ACEOF
1.18649 ++# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
1.18650 ++case `${MAKE-make} -f conftest.make 2>/dev/null` in
1.18651 ++ *@@@%%%=?*=@@@%%%*)
1.18652 ++ eval ac_cv_prog_make_${ac_make}_set=yes;;
1.18653 ++ *)
1.18654 ++ eval ac_cv_prog_make_${ac_make}_set=no;;
1.18655 ++esac
1.18656 ++rm -f conftest.make
1.18657 ++fi
1.18658 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
1.18659 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.18660 ++echo "${ECHO_T}yes" >&6; }
1.18661 ++ SET_MAKE=
1.18662 ++else
1.18663 ++ { echo "$as_me:$LINENO: result: no" >&5
1.18664 ++echo "${ECHO_T}no" >&6; }
1.18665 ++ SET_MAKE="MAKE=${MAKE-make}"
1.18666 ++fi
1.18667 ++
1.18668 ++
1.18669 ++# Check whether --enable-multilib was given.
1.18670 ++if test "${enable_multilib+set}" = set; then
1.18671 ++ enableval=$enable_multilib; case "${enableval}" in
1.18672 ++ yes) multilib=yes ;;
1.18673 ++ no) multilib=no ;;
1.18674 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
1.18675 ++echo "$as_me: error: bad value ${enableval} for multilib option" >&2;}
1.18676 ++ { (exit 1); exit 1; }; } ;;
1.18677 ++ esac
1.18678 ++else
1.18679 ++ multilib=yes
1.18680 ++fi
1.18681 ++
1.18682 ++# Check whether --enable-target-optspace was given.
1.18683 ++if test "${enable_target_optspace+set}" = set; then
1.18684 ++ enableval=$enable_target_optspace; case "${enableval}" in
1.18685 ++ yes) target_optspace=yes ;;
1.18686 ++ no) target_optspace=no ;;
1.18687 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
1.18688 ++echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;}
1.18689 ++ { (exit 1); exit 1; }; } ;;
1.18690 ++ esac
1.18691 ++else
1.18692 ++ target_optspace=
1.18693 ++fi
1.18694 ++
1.18695 ++# Check whether --enable-malloc-debugging was given.
1.18696 ++if test "${enable_malloc_debugging+set}" = set; then
1.18697 ++ enableval=$enable_malloc_debugging; case "${enableval}" in
1.18698 ++ yes) malloc_debugging=yes ;;
1.18699 ++ no) malloc_debugging=no ;;
1.18700 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
1.18701 ++echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;}
1.18702 ++ { (exit 1); exit 1; }; } ;;
1.18703 ++ esac
1.18704 ++else
1.18705 ++ malloc_debugging=
1.18706 ++fi
1.18707 ++
1.18708 ++# Check whether --enable-newlib-multithread was given.
1.18709 ++if test "${enable_newlib_multithread+set}" = set; then
1.18710 ++ enableval=$enable_newlib_multithread; case "${enableval}" in
1.18711 ++ yes) newlib_multithread=yes ;;
1.18712 ++ no) newlib_multithread=no ;;
1.18713 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
1.18714 ++echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;}
1.18715 ++ { (exit 1); exit 1; }; } ;;
1.18716 ++ esac
1.18717 ++else
1.18718 ++ newlib_multithread=yes
1.18719 ++fi
1.18720 ++
1.18721 ++# Check whether --enable-newlib-iconv was given.
1.18722 ++if test "${enable_newlib_iconv+set}" = set; then
1.18723 ++ enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
1.18724 ++ case "${enableval}" in
1.18725 ++ yes) newlib_iconv=yes ;;
1.18726 ++ no) newlib_iconv=no ;;
1.18727 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5
1.18728 ++echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;}
1.18729 ++ { (exit 1); exit 1; }; } ;;
1.18730 ++ esac
1.18731 ++ fi
1.18732 ++else
1.18733 ++ newlib_iconv=${newlib_iconv}
1.18734 ++fi
1.18735 ++
1.18736 ++# Check whether --enable-newlib-elix-level was given.
1.18737 ++if test "${enable_newlib_elix_level+set}" = set; then
1.18738 ++ enableval=$enable_newlib_elix_level; case "${enableval}" in
1.18739 ++ 0) newlib_elix_level=0 ;;
1.18740 ++ 1) newlib_elix_level=1 ;;
1.18741 ++ 2) newlib_elix_level=2 ;;
1.18742 ++ 3) newlib_elix_level=3 ;;
1.18743 ++ 4) newlib_elix_level=4 ;;
1.18744 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5
1.18745 ++echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;}
1.18746 ++ { (exit 1); exit 1; }; } ;;
1.18747 ++ esac
1.18748 ++else
1.18749 ++ newlib_elix_level=0
1.18750 ++fi
1.18751 ++
1.18752 ++# Check whether --enable-newlib-io-float was given.
1.18753 ++if test "${enable_newlib_io_float+set}" = set; then
1.18754 ++ enableval=$enable_newlib_io_float; case "${enableval}" in
1.18755 ++ yes) newlib_io_float=yes ;;
1.18756 ++ no) newlib_io_float=no ;;
1.18757 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
1.18758 ++echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;}
1.18759 ++ { (exit 1); exit 1; }; } ;;
1.18760 ++ esac
1.18761 ++else
1.18762 ++ newlib_io_float=yes
1.18763 ++fi
1.18764 ++
1.18765 ++# Check whether --enable-newlib-supplied-syscalls was given.
1.18766 ++if test "${enable_newlib_supplied_syscalls+set}" = set; then
1.18767 ++ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
1.18768 ++ yes) newlib_may_supply_syscalls=yes ;;
1.18769 ++ no) newlib_may_supply_syscalls=no ;;
1.18770 ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
1.18771 ++echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;}
1.18772 ++ { (exit 1); exit 1; }; } ;;
1.18773 ++ esac
1.18774 ++else
1.18775 ++ newlib_may_supply_syscalls=yes
1.18776 ++fi
1.18777 ++
1.18778 ++
1.18779 ++
1.18780 ++if test x${newlib_may_supply_syscalls} = xyes; then
1.18781 ++ MAY_SUPPLY_SYSCALLS_TRUE=
1.18782 ++ MAY_SUPPLY_SYSCALLS_FALSE='#'
1.18783 ++else
1.18784 ++ MAY_SUPPLY_SYSCALLS_TRUE='#'
1.18785 ++ MAY_SUPPLY_SYSCALLS_FALSE=
1.18786 ++fi
1.18787 ++
1.18788 ++
1.18789 ++test -z "${with_target_subdir}" && with_target_subdir=.
1.18790 ++
1.18791 ++if test "${srcdir}" = "."; then
1.18792 ++ if test "${with_target_subdir}" != "."; then
1.18793 ++ newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
1.18794 ++ else
1.18795 ++ newlib_basedir="${srcdir}/${with_multisrctop}../../.."
1.18796 ++ fi
1.18797 ++else
1.18798 ++ newlib_basedir="${srcdir}/../../.."
1.18799 ++fi
1.18800 ++
1.18801 ++
1.18802 ++{ echo "$as_me:$LINENO: checking target system type" >&5
1.18803 ++echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
1.18804 ++if test "${ac_cv_target+set}" = set; then
1.18805 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.18806 ++else
1.18807 ++ if test "x$target_alias" = x; then
1.18808 ++ ac_cv_target=$ac_cv_host
1.18809 ++else
1.18810 ++ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
1.18811 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
1.18812 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
1.18813 ++ { (exit 1); exit 1; }; }
1.18814 ++fi
1.18815 ++
1.18816 ++fi
1.18817 ++{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
1.18818 ++echo "${ECHO_T}$ac_cv_target" >&6; }
1.18819 ++case $ac_cv_target in
1.18820 ++*-*-*) ;;
1.18821 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
1.18822 ++echo "$as_me: error: invalid value of canonical target" >&2;}
1.18823 ++ { (exit 1); exit 1; }; };;
1.18824 ++esac
1.18825 ++target=$ac_cv_target
1.18826 ++ac_save_IFS=$IFS; IFS='-'
1.18827 ++set x $ac_cv_target
1.18828 ++shift
1.18829 ++target_cpu=$1
1.18830 ++target_vendor=$2
1.18831 ++shift; shift
1.18832 ++# Remember, the first character of IFS is used to create $*,
1.18833 ++# except with old shells:
1.18834 ++target_os=$*
1.18835 ++IFS=$ac_save_IFS
1.18836 ++case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
1.18837 ++
1.18838 ++
1.18839 ++# The aliases save the names the user supplied, while $host etc.
1.18840 ++# will get canonicalized.
1.18841 ++test -n "$target_alias" &&
1.18842 ++ test "$program_prefix$program_suffix$program_transform_name" = \
1.18843 ++ NONENONEs,x,x, &&
1.18844 ++ program_prefix=${target_alias}-
1.18845 ++
1.18846 ++
1.18847 ++PACKAGE=newlib
1.18848 ++
1.18849 ++VERSION=1.14.0.atmel.1.0.1
1.18850 ++
1.18851 ++if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
1.18852 ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
1.18853 ++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
1.18854 ++ { (exit 1); exit 1; }; }
1.18855 ++fi
1.18856 ++
1.18857 ++cat >>confdefs.h <<_ACEOF
1.18858 ++#define PACKAGE "$PACKAGE"
1.18859 ++_ACEOF
1.18860 ++
1.18861 ++
1.18862 ++cat >>confdefs.h <<_ACEOF
1.18863 ++#define VERSION "$VERSION"
1.18864 ++_ACEOF
1.18865 ++
1.18866 ++
1.18867 ++
1.18868 ++missing_dir=`cd $ac_aux_dir && pwd`
1.18869 ++{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
1.18870 ++echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; }
1.18871 ++# Run test in a subshell; some versions of sh will print an error if
1.18872 ++# an executable is not found, even if stderr is redirected.
1.18873 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.18874 ++if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
1.18875 ++ ACLOCAL=aclocal-${am__api_version}
1.18876 ++ { echo "$as_me:$LINENO: result: found" >&5
1.18877 ++echo "${ECHO_T}found" >&6; }
1.18878 ++else
1.18879 ++ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
1.18880 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.18881 ++echo "${ECHO_T}missing" >&6; }
1.18882 ++fi
1.18883 ++
1.18884 ++{ echo "$as_me:$LINENO: checking for working autoconf" >&5
1.18885 ++echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; }
1.18886 ++# Run test in a subshell; some versions of sh will print an error if
1.18887 ++# an executable is not found, even if stderr is redirected.
1.18888 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.18889 ++if (autoconf --version) < /dev/null > /dev/null 2>&1; then
1.18890 ++ AUTOCONF=autoconf
1.18891 ++ { echo "$as_me:$LINENO: result: found" >&5
1.18892 ++echo "${ECHO_T}found" >&6; }
1.18893 ++else
1.18894 ++ AUTOCONF="$missing_dir/missing autoconf"
1.18895 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.18896 ++echo "${ECHO_T}missing" >&6; }
1.18897 ++fi
1.18898 ++
1.18899 ++{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
1.18900 ++echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; }
1.18901 ++# Run test in a subshell; some versions of sh will print an error if
1.18902 ++# an executable is not found, even if stderr is redirected.
1.18903 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.18904 ++if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
1.18905 ++ AUTOMAKE=automake-${am__api_version}
1.18906 ++ { echo "$as_me:$LINENO: result: found" >&5
1.18907 ++echo "${ECHO_T}found" >&6; }
1.18908 ++else
1.18909 ++ AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
1.18910 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.18911 ++echo "${ECHO_T}missing" >&6; }
1.18912 ++fi
1.18913 ++
1.18914 ++{ echo "$as_me:$LINENO: checking for working autoheader" >&5
1.18915 ++echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; }
1.18916 ++# Run test in a subshell; some versions of sh will print an error if
1.18917 ++# an executable is not found, even if stderr is redirected.
1.18918 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.18919 ++if (autoheader --version) < /dev/null > /dev/null 2>&1; then
1.18920 ++ AUTOHEADER=autoheader
1.18921 ++ { echo "$as_me:$LINENO: result: found" >&5
1.18922 ++echo "${ECHO_T}found" >&6; }
1.18923 ++else
1.18924 ++ AUTOHEADER="$missing_dir/missing autoheader"
1.18925 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.18926 ++echo "${ECHO_T}missing" >&6; }
1.18927 ++fi
1.18928 ++
1.18929 ++{ echo "$as_me:$LINENO: checking for working makeinfo" >&5
1.18930 ++echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; }
1.18931 ++# Run test in a subshell; some versions of sh will print an error if
1.18932 ++# an executable is not found, even if stderr is redirected.
1.18933 ++# Redirect stdin to placate older versions of autoconf. Sigh.
1.18934 ++if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
1.18935 ++ MAKEINFO=makeinfo
1.18936 ++ { echo "$as_me:$LINENO: result: found" >&5
1.18937 ++echo "${ECHO_T}found" >&6; }
1.18938 ++else
1.18939 ++ MAKEINFO="$missing_dir/missing makeinfo"
1.18940 ++ { echo "$as_me:$LINENO: result: missing" >&5
1.18941 ++echo "${ECHO_T}missing" >&6; }
1.18942 ++fi
1.18943 ++
1.18944 ++
1.18945 ++
1.18946 ++# FIXME: We temporarily define our own version of AC_PROG_CC. This is
1.18947 ++# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
1.18948 ++# are probably using a cross compiler, which will not be able to fully
1.18949 ++# link an executable. This should really be fixed in autoconf
1.18950 ++# itself.
1.18951 ++
1.18952 ++
1.18953 ++
1.18954 ++# Extract the first word of "gcc", so it can be a program name with args.
1.18955 ++set dummy gcc; ac_word=$2
1.18956 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.18957 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.18958 ++if test "${ac_cv_prog_CC+set}" = set; then
1.18959 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.18960 ++else
1.18961 ++ if test -n "$CC"; then
1.18962 ++ ac_cv_prog_CC="$CC" # Let the user override the test.
1.18963 ++else
1.18964 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.18965 ++for as_dir in $PATH
1.18966 ++do
1.18967 ++ IFS=$as_save_IFS
1.18968 ++ test -z "$as_dir" && as_dir=.
1.18969 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.18970 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.18971 ++ ac_cv_prog_CC="gcc"
1.18972 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.18973 ++ break 2
1.18974 ++ fi
1.18975 ++done
1.18976 ++done
1.18977 ++IFS=$as_save_IFS
1.18978 ++
1.18979 ++fi
1.18980 ++fi
1.18981 ++CC=$ac_cv_prog_CC
1.18982 ++if test -n "$CC"; then
1.18983 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.18984 ++echo "${ECHO_T}$CC" >&6; }
1.18985 ++else
1.18986 ++ { echo "$as_me:$LINENO: result: no" >&5
1.18987 ++echo "${ECHO_T}no" >&6; }
1.18988 ++fi
1.18989 ++
1.18990 ++
1.18991 ++if test -z "$CC"; then
1.18992 ++ # Extract the first word of "cc", so it can be a program name with args.
1.18993 ++set dummy cc; ac_word=$2
1.18994 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.18995 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.18996 ++if test "${ac_cv_prog_CC+set}" = set; then
1.18997 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.18998 ++else
1.18999 ++ if test -n "$CC"; then
1.19000 ++ ac_cv_prog_CC="$CC" # Let the user override the test.
1.19001 ++else
1.19002 ++ ac_prog_rejected=no
1.19003 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19004 ++for as_dir in $PATH
1.19005 ++do
1.19006 ++ IFS=$as_save_IFS
1.19007 ++ test -z "$as_dir" && as_dir=.
1.19008 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.19009 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.19010 ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
1.19011 ++ ac_prog_rejected=yes
1.19012 ++ continue
1.19013 ++ fi
1.19014 ++ ac_cv_prog_CC="cc"
1.19015 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.19016 ++ break 2
1.19017 ++ fi
1.19018 ++done
1.19019 ++done
1.19020 ++IFS=$as_save_IFS
1.19021 ++
1.19022 ++if test $ac_prog_rejected = yes; then
1.19023 ++ # We found a bogon in the path, so make sure we never use it.
1.19024 ++ set dummy $ac_cv_prog_CC
1.19025 ++ shift
1.19026 ++ if test $# != 0; then
1.19027 ++ # We chose a different compiler from the bogus one.
1.19028 ++ # However, it has the same basename, so the bogon will be chosen
1.19029 ++ # first if we set CC to just the basename; use the full file name.
1.19030 ++ shift
1.19031 ++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
1.19032 ++ fi
1.19033 ++fi
1.19034 ++fi
1.19035 ++fi
1.19036 ++CC=$ac_cv_prog_CC
1.19037 ++if test -n "$CC"; then
1.19038 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.19039 ++echo "${ECHO_T}$CC" >&6; }
1.19040 ++else
1.19041 ++ { echo "$as_me:$LINENO: result: no" >&5
1.19042 ++echo "${ECHO_T}no" >&6; }
1.19043 ++fi
1.19044 ++
1.19045 ++
1.19046 ++ test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
1.19047 ++echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
1.19048 ++ { (exit 1); exit 1; }; }
1.19049 ++fi
1.19050 ++
1.19051 ++#AC_PROG_CC_GNU
1.19052 ++
1.19053 ++if test $ac_cv_c_compiler_gnu = yes; then
1.19054 ++ GCC=yes
1.19055 ++ ac_test_CFLAGS="${CFLAGS+set}"
1.19056 ++ ac_save_CFLAGS="$CFLAGS"
1.19057 ++ CFLAGS=
1.19058 ++# AC_PROG_CC_G
1.19059 ++ if test "$ac_test_CFLAGS" = set; then
1.19060 ++ CFLAGS="$ac_save_CFLAGS"
1.19061 ++ elif test $ac_cv_prog_cc_g = yes; then
1.19062 ++ CFLAGS="-g -O2"
1.19063 ++ else
1.19064 ++ CFLAGS="-O2"
1.19065 ++ fi
1.19066 ++else
1.19067 ++ GCC=
1.19068 ++ test "${CFLAGS+set}" = set || CFLAGS="-g"
1.19069 ++fi
1.19070 ++
1.19071 ++
1.19072 ++if test -n "$ac_tool_prefix"; then
1.19073 ++ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
1.19074 ++set dummy ${ac_tool_prefix}as; ac_word=$2
1.19075 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.19076 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.19077 ++if test "${ac_cv_prog_AS+set}" = set; then
1.19078 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.19079 ++else
1.19080 ++ if test -n "$AS"; then
1.19081 ++ ac_cv_prog_AS="$AS" # Let the user override the test.
1.19082 ++else
1.19083 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19084 ++for as_dir in $PATH
1.19085 ++do
1.19086 ++ IFS=$as_save_IFS
1.19087 ++ test -z "$as_dir" && as_dir=.
1.19088 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.19089 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.19090 ++ ac_cv_prog_AS="${ac_tool_prefix}as"
1.19091 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.19092 ++ break 2
1.19093 ++ fi
1.19094 ++done
1.19095 ++done
1.19096 ++IFS=$as_save_IFS
1.19097 ++
1.19098 ++fi
1.19099 ++fi
1.19100 ++AS=$ac_cv_prog_AS
1.19101 ++if test -n "$AS"; then
1.19102 ++ { echo "$as_me:$LINENO: result: $AS" >&5
1.19103 ++echo "${ECHO_T}$AS" >&6; }
1.19104 ++else
1.19105 ++ { echo "$as_me:$LINENO: result: no" >&5
1.19106 ++echo "${ECHO_T}no" >&6; }
1.19107 ++fi
1.19108 ++
1.19109 ++
1.19110 ++fi
1.19111 ++if test -z "$ac_cv_prog_AS"; then
1.19112 ++ ac_ct_AS=$AS
1.19113 ++ # Extract the first word of "as", so it can be a program name with args.
1.19114 ++set dummy as; ac_word=$2
1.19115 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.19116 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.19117 ++if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
1.19118 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.19119 ++else
1.19120 ++ if test -n "$ac_ct_AS"; then
1.19121 ++ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
1.19122 ++else
1.19123 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19124 ++for as_dir in $PATH
1.19125 ++do
1.19126 ++ IFS=$as_save_IFS
1.19127 ++ test -z "$as_dir" && as_dir=.
1.19128 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.19129 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.19130 ++ ac_cv_prog_ac_ct_AS="as"
1.19131 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.19132 ++ break 2
1.19133 ++ fi
1.19134 ++done
1.19135 ++done
1.19136 ++IFS=$as_save_IFS
1.19137 ++
1.19138 ++fi
1.19139 ++fi
1.19140 ++ac_ct_AS=$ac_cv_prog_ac_ct_AS
1.19141 ++if test -n "$ac_ct_AS"; then
1.19142 ++ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.19143 ++echo "${ECHO_T}$ac_ct_AS" >&6; }
1.19144 ++else
1.19145 ++ { echo "$as_me:$LINENO: result: no" >&5
1.19146 ++echo "${ECHO_T}no" >&6; }
1.19147 ++fi
1.19148 ++
1.19149 ++ if test "x$ac_ct_AS" = x; then
1.19150 ++ AS=""
1.19151 ++ else
1.19152 ++ case $cross_compiling:$ac_tool_warned in
1.19153 ++yes:)
1.19154 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.19155 ++whose name does not start with the host triplet. If you think this
1.19156 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.19157 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.19158 ++whose name does not start with the host triplet. If you think this
1.19159 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.19160 ++ac_tool_warned=yes ;;
1.19161 ++esac
1.19162 ++ AS=$ac_ct_AS
1.19163 ++ fi
1.19164 ++else
1.19165 ++ AS="$ac_cv_prog_AS"
1.19166 ++fi
1.19167 ++
1.19168 ++if test -n "$ac_tool_prefix"; then
1.19169 ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
1.19170 ++set dummy ${ac_tool_prefix}ar; ac_word=$2
1.19171 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.19172 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.19173 ++if test "${ac_cv_prog_AR+set}" = set; then
1.19174 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.19175 ++else
1.19176 ++ if test -n "$AR"; then
1.19177 ++ ac_cv_prog_AR="$AR" # Let the user override the test.
1.19178 ++else
1.19179 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19180 ++for as_dir in $PATH
1.19181 ++do
1.19182 ++ IFS=$as_save_IFS
1.19183 ++ test -z "$as_dir" && as_dir=.
1.19184 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.19185 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.19186 ++ ac_cv_prog_AR="${ac_tool_prefix}ar"
1.19187 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.19188 ++ break 2
1.19189 ++ fi
1.19190 ++done
1.19191 ++done
1.19192 ++IFS=$as_save_IFS
1.19193 ++
1.19194 ++fi
1.19195 ++fi
1.19196 ++AR=$ac_cv_prog_AR
1.19197 ++if test -n "$AR"; then
1.19198 ++ { echo "$as_me:$LINENO: result: $AR" >&5
1.19199 ++echo "${ECHO_T}$AR" >&6; }
1.19200 ++else
1.19201 ++ { echo "$as_me:$LINENO: result: no" >&5
1.19202 ++echo "${ECHO_T}no" >&6; }
1.19203 ++fi
1.19204 ++
1.19205 ++
1.19206 ++fi
1.19207 ++if test -z "$ac_cv_prog_AR"; then
1.19208 ++ ac_ct_AR=$AR
1.19209 ++ # Extract the first word of "ar", so it can be a program name with args.
1.19210 ++set dummy ar; ac_word=$2
1.19211 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.19212 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.19213 ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
1.19214 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.19215 ++else
1.19216 ++ if test -n "$ac_ct_AR"; then
1.19217 ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
1.19218 ++else
1.19219 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19220 ++for as_dir in $PATH
1.19221 ++do
1.19222 ++ IFS=$as_save_IFS
1.19223 ++ test -z "$as_dir" && as_dir=.
1.19224 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.19225 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.19226 ++ ac_cv_prog_ac_ct_AR="ar"
1.19227 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.19228 ++ break 2
1.19229 ++ fi
1.19230 ++done
1.19231 ++done
1.19232 ++IFS=$as_save_IFS
1.19233 ++
1.19234 ++fi
1.19235 ++fi
1.19236 ++ac_ct_AR=$ac_cv_prog_ac_ct_AR
1.19237 ++if test -n "$ac_ct_AR"; then
1.19238 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.19239 ++echo "${ECHO_T}$ac_ct_AR" >&6; }
1.19240 ++else
1.19241 ++ { echo "$as_me:$LINENO: result: no" >&5
1.19242 ++echo "${ECHO_T}no" >&6; }
1.19243 ++fi
1.19244 ++
1.19245 ++ if test "x$ac_ct_AR" = x; then
1.19246 ++ AR=""
1.19247 ++ else
1.19248 ++ case $cross_compiling:$ac_tool_warned in
1.19249 ++yes:)
1.19250 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.19251 ++whose name does not start with the host triplet. If you think this
1.19252 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.19253 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.19254 ++whose name does not start with the host triplet. If you think this
1.19255 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.19256 ++ac_tool_warned=yes ;;
1.19257 ++esac
1.19258 ++ AR=$ac_ct_AR
1.19259 ++ fi
1.19260 ++else
1.19261 ++ AR="$ac_cv_prog_AR"
1.19262 ++fi
1.19263 ++
1.19264 ++if test -n "$ac_tool_prefix"; then
1.19265 ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
1.19266 ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2
1.19267 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.19268 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.19269 ++if test "${ac_cv_prog_RANLIB+set}" = set; then
1.19270 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.19271 ++else
1.19272 ++ if test -n "$RANLIB"; then
1.19273 ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
1.19274 ++else
1.19275 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19276 ++for as_dir in $PATH
1.19277 ++do
1.19278 ++ IFS=$as_save_IFS
1.19279 ++ test -z "$as_dir" && as_dir=.
1.19280 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.19281 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.19282 ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
1.19283 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.19284 ++ break 2
1.19285 ++ fi
1.19286 ++done
1.19287 ++done
1.19288 ++IFS=$as_save_IFS
1.19289 ++
1.19290 ++fi
1.19291 ++fi
1.19292 ++RANLIB=$ac_cv_prog_RANLIB
1.19293 ++if test -n "$RANLIB"; then
1.19294 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5
1.19295 ++echo "${ECHO_T}$RANLIB" >&6; }
1.19296 ++else
1.19297 ++ { echo "$as_me:$LINENO: result: no" >&5
1.19298 ++echo "${ECHO_T}no" >&6; }
1.19299 ++fi
1.19300 ++
1.19301 ++
1.19302 ++fi
1.19303 ++if test -z "$ac_cv_prog_RANLIB"; then
1.19304 ++ ac_ct_RANLIB=$RANLIB
1.19305 ++ # Extract the first word of "ranlib", so it can be a program name with args.
1.19306 ++set dummy ranlib; ac_word=$2
1.19307 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.19308 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.19309 ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
1.19310 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.19311 ++else
1.19312 ++ if test -n "$ac_ct_RANLIB"; then
1.19313 ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
1.19314 ++else
1.19315 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19316 ++for as_dir in $PATH
1.19317 ++do
1.19318 ++ IFS=$as_save_IFS
1.19319 ++ test -z "$as_dir" && as_dir=.
1.19320 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.19321 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.19322 ++ ac_cv_prog_ac_ct_RANLIB="ranlib"
1.19323 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.19324 ++ break 2
1.19325 ++ fi
1.19326 ++done
1.19327 ++done
1.19328 ++IFS=$as_save_IFS
1.19329 ++
1.19330 ++fi
1.19331 ++fi
1.19332 ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
1.19333 ++if test -n "$ac_ct_RANLIB"; then
1.19334 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.19335 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
1.19336 ++else
1.19337 ++ { echo "$as_me:$LINENO: result: no" >&5
1.19338 ++echo "${ECHO_T}no" >&6; }
1.19339 ++fi
1.19340 ++
1.19341 ++ if test "x$ac_ct_RANLIB" = x; then
1.19342 ++ RANLIB=":"
1.19343 ++ else
1.19344 ++ case $cross_compiling:$ac_tool_warned in
1.19345 ++yes:)
1.19346 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.19347 ++whose name does not start with the host triplet. If you think this
1.19348 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.19349 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.19350 ++whose name does not start with the host triplet. If you think this
1.19351 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.19352 ++ac_tool_warned=yes ;;
1.19353 ++esac
1.19354 ++ RANLIB=$ac_ct_RANLIB
1.19355 ++ fi
1.19356 ++else
1.19357 ++ RANLIB="$ac_cv_prog_RANLIB"
1.19358 ++fi
1.19359 ++
1.19360 ++
1.19361 ++# Find a good install program. We prefer a C program (faster),
1.19362 ++# so one script is as good as another. But avoid the broken or
1.19363 ++# incompatible versions:
1.19364 ++# SysV /etc/install, /usr/sbin/install
1.19365 ++# SunOS /usr/etc/install
1.19366 ++# IRIX /sbin/install
1.19367 ++# AIX /bin/install
1.19368 ++# AmigaOS /C/install, which installs bootblocks on floppy discs
1.19369 ++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
1.19370 ++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
1.19371 ++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1.19372 ++# OS/2's system install, which has a completely different semantic
1.19373 ++# ./install, which can be erroneously created by make from ./install.sh.
1.19374 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.19375 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
1.19376 ++if test -z "$INSTALL"; then
1.19377 ++if test "${ac_cv_path_install+set}" = set; then
1.19378 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.19379 ++else
1.19380 ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19381 ++for as_dir in $PATH
1.19382 ++do
1.19383 ++ IFS=$as_save_IFS
1.19384 ++ test -z "$as_dir" && as_dir=.
1.19385 ++ # Account for people who put trailing slashes in PATH elements.
1.19386 ++case $as_dir/ in
1.19387 ++ ./ | .// | /cC/* | \
1.19388 ++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
1.19389 ++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
1.19390 ++ /usr/ucb/* ) ;;
1.19391 ++ *)
1.19392 ++ # OSF1 and SCO ODT 3.0 have their own names for install.
1.19393 ++ # Don't use installbsd from OSF since it installs stuff as root
1.19394 ++ # by default.
1.19395 ++ for ac_prog in ginstall scoinst install; do
1.19396 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.19397 ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
1.19398 ++ if test $ac_prog = install &&
1.19399 ++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.19400 ++ # AIX install. It has an incompatible calling convention.
1.19401 ++ :
1.19402 ++ elif test $ac_prog = install &&
1.19403 ++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.19404 ++ # program-specific install script used by HP pwplus--don't use.
1.19405 ++ :
1.19406 ++ else
1.19407 ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
1.19408 ++ break 3
1.19409 ++ fi
1.19410 ++ fi
1.19411 ++ done
1.19412 ++ done
1.19413 ++ ;;
1.19414 ++esac
1.19415 ++done
1.19416 ++IFS=$as_save_IFS
1.19417 ++
1.19418 ++
1.19419 ++fi
1.19420 ++ if test "${ac_cv_path_install+set}" = set; then
1.19421 ++ INSTALL=$ac_cv_path_install
1.19422 ++ else
1.19423 ++ # As a last resort, use the slow shell script. Don't cache a
1.19424 ++ # value for INSTALL within a source directory, because that will
1.19425 ++ # break other packages using the cache if that directory is
1.19426 ++ # removed, or if the value is a relative name.
1.19427 ++ INSTALL=$ac_install_sh
1.19428 ++ fi
1.19429 ++fi
1.19430 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
1.19431 ++echo "${ECHO_T}$INSTALL" >&6; }
1.19432 ++
1.19433 ++# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1.19434 ++# It thinks the first close brace ends the variable substitution.
1.19435 ++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
1.19436 ++
1.19437 ++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
1.19438 ++
1.19439 ++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1.19440 ++
1.19441 ++
1.19442 ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
1.19443 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
1.19444 ++ # Check whether --enable-maintainer-mode was given.
1.19445 ++if test "${enable_maintainer_mode+set}" = set; then
1.19446 ++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
1.19447 ++else
1.19448 ++ USE_MAINTAINER_MODE=no
1.19449 ++fi
1.19450 ++
1.19451 ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
1.19452 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
1.19453 ++
1.19454 ++
1.19455 ++if test $USE_MAINTAINER_MODE = yes; then
1.19456 ++ MAINTAINER_MODE_TRUE=
1.19457 ++ MAINTAINER_MODE_FALSE='#'
1.19458 ++else
1.19459 ++ MAINTAINER_MODE_TRUE='#'
1.19460 ++ MAINTAINER_MODE_FALSE=
1.19461 ++fi
1.19462 ++ MAINT=$MAINTAINER_MODE_TRUE
1.19463 ++
1.19464 ++
1.19465 ++
1.19466 ++# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
1.19467 ++# at least currently, we never actually build a program, so we never
1.19468 ++# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
1.19469 ++# fails, because we are probably configuring with a cross compiler
1.19470 ++# which can't create executables. So we include AC_EXEEXT to keep
1.19471 ++# automake happy, but we don't execute it, since we don't care about
1.19472 ++# the result.
1.19473 ++#if false; then
1.19474 ++#
1.19475 ++#fi
1.19476 ++
1.19477 ++. ${newlib_basedir}/configure.host
1.19478 ++
1.19479 ++newlib_cflags="${newlib_cflags} -fno-builtin"
1.19480 ++
1.19481 ++NEWLIB_CFLAGS=${newlib_cflags}
1.19482 ++
1.19483 ++
1.19484 ++LDFLAGS=${ldflags}
1.19485 ++
1.19486 ++
1.19487 ++
1.19488 ++
1.19489 ++if test x${newlib_elix_level} = x0; then
1.19490 ++ ELIX_LEVEL_0_TRUE=
1.19491 ++ ELIX_LEVEL_0_FALSE='#'
1.19492 ++else
1.19493 ++ ELIX_LEVEL_0_TRUE='#'
1.19494 ++ ELIX_LEVEL_0_FALSE=
1.19495 ++fi
1.19496 ++
1.19497 ++
1.19498 ++if test x${newlib_elix_level} = x1; then
1.19499 ++ ELIX_LEVEL_1_TRUE=
1.19500 ++ ELIX_LEVEL_1_FALSE='#'
1.19501 ++else
1.19502 ++ ELIX_LEVEL_1_TRUE='#'
1.19503 ++ ELIX_LEVEL_1_FALSE=
1.19504 ++fi
1.19505 ++
1.19506 ++
1.19507 ++if test x${newlib_elix_level} = x2; then
1.19508 ++ ELIX_LEVEL_2_TRUE=
1.19509 ++ ELIX_LEVEL_2_FALSE='#'
1.19510 ++else
1.19511 ++ ELIX_LEVEL_2_TRUE='#'
1.19512 ++ ELIX_LEVEL_2_FALSE=
1.19513 ++fi
1.19514 ++
1.19515 ++
1.19516 ++if test x${newlib_elix_level} = x3; then
1.19517 ++ ELIX_LEVEL_3_TRUE=
1.19518 ++ ELIX_LEVEL_3_FALSE='#'
1.19519 ++else
1.19520 ++ ELIX_LEVEL_3_TRUE='#'
1.19521 ++ ELIX_LEVEL_3_FALSE=
1.19522 ++fi
1.19523 ++
1.19524 ++
1.19525 ++if test x${newlib_elix_level} = x4; then
1.19526 ++ ELIX_LEVEL_4_TRUE=
1.19527 ++ ELIX_LEVEL_4_FALSE='#'
1.19528 ++else
1.19529 ++ ELIX_LEVEL_4_TRUE='#'
1.19530 ++ ELIX_LEVEL_4_FALSE=
1.19531 ++fi
1.19532 ++
1.19533 ++
1.19534 ++
1.19535 ++if test x${use_libtool} = xyes; then
1.19536 ++ USE_LIBTOOL_TRUE=
1.19537 ++ USE_LIBTOOL_FALSE='#'
1.19538 ++else
1.19539 ++ USE_LIBTOOL_TRUE='#'
1.19540 ++ USE_LIBTOOL_FALSE=
1.19541 ++fi
1.19542 ++
1.19543 ++# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we
1.19544 ++# use oext, which is set in configure.host based on the target platform.
1.19545 ++OBJEXT=${oext}
1.19546 ++
1.19547 ++
1.19548 ++
1.19549 ++
1.19550 ++
1.19551 ++
1.19552 ++
1.19553 ++
1.19554 ++
1.19555 ++
1.19556 ++ac_config_files="$ac_config_files Makefile"
1.19557 ++
1.19558 ++cat >confcache <<\_ACEOF
1.19559 ++# This file is a shell script that caches the results of configure
1.19560 ++# tests run on this system so they can be shared between configure
1.19561 ++# scripts and configure runs, see configure's option --config-cache.
1.19562 ++# It is not useful on other systems. If it contains results you don't
1.19563 ++# want to keep, you may remove or edit it.
1.19564 ++#
1.19565 ++# config.status only pays attention to the cache file if you give it
1.19566 ++# the --recheck option to rerun configure.
1.19567 ++#
1.19568 ++# `ac_cv_env_foo' variables (set or unset) will be overridden when
1.19569 ++# loading this file, other *unset* `ac_cv_foo' will be assigned the
1.19570 ++# following values.
1.19571 ++
1.19572 ++_ACEOF
1.19573 ++
1.19574 ++# The following way of writing the cache mishandles newlines in values,
1.19575 ++# but we know of no workaround that is simple, portable, and efficient.
1.19576 ++# So, we kill variables containing newlines.
1.19577 ++# Ultrix sh set writes to stderr and can't be redirected directly,
1.19578 ++# and sets the high bit in the cache file unless we assign to the vars.
1.19579 ++(
1.19580 ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
1.19581 ++ eval ac_val=\$$ac_var
1.19582 ++ case $ac_val in #(
1.19583 ++ *${as_nl}*)
1.19584 ++ case $ac_var in #(
1.19585 ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
1.19586 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
1.19587 ++ esac
1.19588 ++ case $ac_var in #(
1.19589 ++ _ | IFS | as_nl) ;; #(
1.19590 ++ *) $as_unset $ac_var ;;
1.19591 ++ esac ;;
1.19592 ++ esac
1.19593 ++ done
1.19594 ++
1.19595 ++ (set) 2>&1 |
1.19596 ++ case $as_nl`(ac_space=' '; set) 2>&1` in #(
1.19597 ++ *${as_nl}ac_space=\ *)
1.19598 ++ # `set' does not quote correctly, so add quotes (double-quote
1.19599 ++ # substitution turns \\\\ into \\, and sed turns \\ into \).
1.19600 ++ sed -n \
1.19601 ++ "s/'/'\\\\''/g;
1.19602 ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1.19603 ++ ;; #(
1.19604 ++ *)
1.19605 ++ # `set' quotes correctly as required by POSIX, so do not add quotes.
1.19606 ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
1.19607 ++ ;;
1.19608 ++ esac |
1.19609 ++ sort
1.19610 ++) |
1.19611 ++ sed '
1.19612 ++ /^ac_cv_env_/b end
1.19613 ++ t clear
1.19614 ++ :clear
1.19615 ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1.19616 ++ t end
1.19617 ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1.19618 ++ :end' >>confcache
1.19619 ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
1.19620 ++ if test -w "$cache_file"; then
1.19621 ++ test "x$cache_file" != "x/dev/null" &&
1.19622 ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
1.19623 ++echo "$as_me: updating cache $cache_file" >&6;}
1.19624 ++ cat confcache >$cache_file
1.19625 ++ else
1.19626 ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
1.19627 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;}
1.19628 ++ fi
1.19629 ++fi
1.19630 ++rm -f confcache
1.19631 ++
1.19632 ++test "x$prefix" = xNONE && prefix=$ac_default_prefix
1.19633 ++# Let make expand exec_prefix.
1.19634 ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1.19635 ++
1.19636 ++# Transform confdefs.h into DEFS.
1.19637 ++# Protect against shell expansion while executing Makefile rules.
1.19638 ++# Protect against Makefile macro expansion.
1.19639 ++#
1.19640 ++# If the first sed substitution is executed (which looks for macros that
1.19641 ++# take arguments), then branch to the quote section. Otherwise,
1.19642 ++# look for a macro that doesn't take arguments.
1.19643 ++ac_script='
1.19644 ++t clear
1.19645 ++:clear
1.19646 ++s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
1.19647 ++t quote
1.19648 ++s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
1.19649 ++t quote
1.19650 ++b any
1.19651 ++:quote
1.19652 ++s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
1.19653 ++s/\[/\\&/g
1.19654 ++s/\]/\\&/g
1.19655 ++s/\$/$$/g
1.19656 ++H
1.19657 ++:any
1.19658 ++${
1.19659 ++ g
1.19660 ++ s/^\n//
1.19661 ++ s/\n/ /g
1.19662 ++ p
1.19663 ++}
1.19664 ++'
1.19665 ++DEFS=`sed -n "$ac_script" confdefs.h`
1.19666 ++
1.19667 ++
1.19668 ++ac_libobjs=
1.19669 ++ac_ltlibobjs=
1.19670 ++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
1.19671 ++ # 1. Remove the extension, and $U if already installed.
1.19672 ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
1.19673 ++ ac_i=`echo "$ac_i" | sed "$ac_script"`
1.19674 ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
1.19675 ++ # will be set to the directory where LIBOBJS objects are built.
1.19676 ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
1.19677 ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
1.19678 ++done
1.19679 ++LIBOBJS=$ac_libobjs
1.19680 ++
1.19681 ++LTLIBOBJS=$ac_ltlibobjs
1.19682 ++
1.19683 ++
1.19684 ++
1.19685 ++: ${CONFIG_STATUS=./config.status}
1.19686 ++ac_clean_files_save=$ac_clean_files
1.19687 ++ac_clean_files="$ac_clean_files $CONFIG_STATUS"
1.19688 ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
1.19689 ++echo "$as_me: creating $CONFIG_STATUS" >&6;}
1.19690 ++cat >$CONFIG_STATUS <<_ACEOF
1.19691 ++#! $SHELL
1.19692 ++# Generated by $as_me.
1.19693 ++# Run this file to recreate the current configuration.
1.19694 ++# Compiler output produced by configure, useful for debugging
1.19695 ++# configure, is in config.log if it exists.
1.19696 ++
1.19697 ++debug=false
1.19698 ++ac_cs_recheck=false
1.19699 ++ac_cs_silent=false
1.19700 ++SHELL=\${CONFIG_SHELL-$SHELL}
1.19701 ++_ACEOF
1.19702 ++
1.19703 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.19704 ++## --------------------- ##
1.19705 ++## M4sh Initialization. ##
1.19706 ++## --------------------- ##
1.19707 ++
1.19708 ++# Be more Bourne compatible
1.19709 ++DUALCASE=1; export DUALCASE # for MKS sh
1.19710 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.19711 ++ emulate sh
1.19712 ++ NULLCMD=:
1.19713 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.19714 ++ # is contrary to our usage. Disable this feature.
1.19715 ++ alias -g '${1+"$@"}'='"$@"'
1.19716 ++ setopt NO_GLOB_SUBST
1.19717 ++else
1.19718 ++ case `(set -o) 2>/dev/null` in
1.19719 ++ *posix*) set -o posix ;;
1.19720 ++esac
1.19721 ++
1.19722 ++fi
1.19723 ++
1.19724 ++
1.19725 ++
1.19726 ++
1.19727 ++# PATH needs CR
1.19728 ++# Avoid depending upon Character Ranges.
1.19729 ++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.19730 ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.19731 ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.19732 ++as_cr_digits='0123456789'
1.19733 ++as_cr_alnum=$as_cr_Letters$as_cr_digits
1.19734 ++
1.19735 ++# The user is always right.
1.19736 ++if test "${PATH_SEPARATOR+set}" != set; then
1.19737 ++ echo "#! /bin/sh" >conf$$.sh
1.19738 ++ echo "exit 0" >>conf$$.sh
1.19739 ++ chmod +x conf$$.sh
1.19740 ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.19741 ++ PATH_SEPARATOR=';'
1.19742 ++ else
1.19743 ++ PATH_SEPARATOR=:
1.19744 ++ fi
1.19745 ++ rm -f conf$$.sh
1.19746 ++fi
1.19747 ++
1.19748 ++# Support unset when possible.
1.19749 ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.19750 ++ as_unset=unset
1.19751 ++else
1.19752 ++ as_unset=false
1.19753 ++fi
1.19754 ++
1.19755 ++
1.19756 ++# IFS
1.19757 ++# We need space, tab and new line, in precisely that order. Quoting is
1.19758 ++# there to prevent editors from complaining about space-tab.
1.19759 ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
1.19760 ++# splitting by setting IFS to empty value.)
1.19761 ++as_nl='
1.19762 ++'
1.19763 ++IFS=" "" $as_nl"
1.19764 ++
1.19765 ++# Find who we are. Look in the path if we contain no directory separator.
1.19766 ++case $0 in
1.19767 ++ *[\\/]* ) as_myself=$0 ;;
1.19768 ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.19769 ++for as_dir in $PATH
1.19770 ++do
1.19771 ++ IFS=$as_save_IFS
1.19772 ++ test -z "$as_dir" && as_dir=.
1.19773 ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.19774 ++done
1.19775 ++IFS=$as_save_IFS
1.19776 ++
1.19777 ++ ;;
1.19778 ++esac
1.19779 ++# We did not find ourselves, most probably we were run as `sh COMMAND'
1.19780 ++# in which case we are not to be found in the path.
1.19781 ++if test "x$as_myself" = x; then
1.19782 ++ as_myself=$0
1.19783 ++fi
1.19784 ++if test ! -f "$as_myself"; then
1.19785 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
1.19786 ++ { (exit 1); exit 1; }
1.19787 ++fi
1.19788 ++
1.19789 ++# Work around bugs in pre-3.0 UWIN ksh.
1.19790 ++for as_var in ENV MAIL MAILPATH
1.19791 ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.19792 ++done
1.19793 ++PS1='$ '
1.19794 ++PS2='> '
1.19795 ++PS4='+ '
1.19796 ++
1.19797 ++# NLS nuisances.
1.19798 ++for as_var in \
1.19799 ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
1.19800 ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
1.19801 ++ LC_TELEPHONE LC_TIME
1.19802 ++do
1.19803 ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1.19804 ++ eval $as_var=C; export $as_var
1.19805 ++ else
1.19806 ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.19807 ++ fi
1.19808 ++done
1.19809 ++
1.19810 ++# Required to use basename.
1.19811 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.19812 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.19813 ++ as_expr=expr
1.19814 ++else
1.19815 ++ as_expr=false
1.19816 ++fi
1.19817 ++
1.19818 ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
1.19819 ++ as_basename=basename
1.19820 ++else
1.19821 ++ as_basename=false
1.19822 ++fi
1.19823 ++
1.19824 ++
1.19825 ++# Name of the executable.
1.19826 ++as_me=`$as_basename -- "$0" ||
1.19827 ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1.19828 ++ X"$0" : 'X\(//\)$' \| \
1.19829 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.19830 ++echo X/"$0" |
1.19831 ++ sed '/^.*\/\([^/][^/]*\)\/*$/{
1.19832 ++ s//\1/
1.19833 ++ q
1.19834 ++ }
1.19835 ++ /^X\/\(\/\/\)$/{
1.19836 ++ s//\1/
1.19837 ++ q
1.19838 ++ }
1.19839 ++ /^X\/\(\/\).*/{
1.19840 ++ s//\1/
1.19841 ++ q
1.19842 ++ }
1.19843 ++ s/.*/./; q'`
1.19844 ++
1.19845 ++# CDPATH.
1.19846 ++$as_unset CDPATH
1.19847 ++
1.19848 ++
1.19849 ++
1.19850 ++ as_lineno_1=$LINENO
1.19851 ++ as_lineno_2=$LINENO
1.19852 ++ test "x$as_lineno_1" != "x$as_lineno_2" &&
1.19853 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
1.19854 ++
1.19855 ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1.19856 ++ # uniformly replaced by the line number. The first 'sed' inserts a
1.19857 ++ # line-number line after each line using $LINENO; the second 'sed'
1.19858 ++ # does the real work. The second script uses 'N' to pair each
1.19859 ++ # line-number line with the line containing $LINENO, and appends
1.19860 ++ # trailing '-' during substitution so that $LINENO is not a special
1.19861 ++ # case at line end.
1.19862 ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1.19863 ++ # scripts with optimization help from Paolo Bonzini. Blame Lee
1.19864 ++ # E. McMahon (1931-1989) for sed's syntax. :-)
1.19865 ++ sed -n '
1.19866 ++ p
1.19867 ++ /[$]LINENO/=
1.19868 ++ ' <$as_myself |
1.19869 ++ sed '
1.19870 ++ s/[$]LINENO.*/&-/
1.19871 ++ t lineno
1.19872 ++ b
1.19873 ++ :lineno
1.19874 ++ N
1.19875 ++ :loop
1.19876 ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
1.19877 ++ t loop
1.19878 ++ s/-\n.*//
1.19879 ++ ' >$as_me.lineno &&
1.19880 ++ chmod +x "$as_me.lineno" ||
1.19881 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
1.19882 ++ { (exit 1); exit 1; }; }
1.19883 ++
1.19884 ++ # Don't try to exec as it changes $[0], causing all sort of problems
1.19885 ++ # (the dirname of $[0] is not the place where we might find the
1.19886 ++ # original and so on. Autoconf is especially sensitive to this).
1.19887 ++ . "./$as_me.lineno"
1.19888 ++ # Exit status is that of the last command.
1.19889 ++ exit
1.19890 ++}
1.19891 ++
1.19892 ++
1.19893 ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
1.19894 ++ as_dirname=dirname
1.19895 ++else
1.19896 ++ as_dirname=false
1.19897 ++fi
1.19898 ++
1.19899 ++ECHO_C= ECHO_N= ECHO_T=
1.19900 ++case `echo -n x` in
1.19901 ++-n*)
1.19902 ++ case `echo 'x\c'` in
1.19903 ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
1.19904 ++ *) ECHO_C='\c';;
1.19905 ++ esac;;
1.19906 ++*)
1.19907 ++ ECHO_N='-n';;
1.19908 ++esac
1.19909 ++
1.19910 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.19911 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.19912 ++ as_expr=expr
1.19913 ++else
1.19914 ++ as_expr=false
1.19915 ++fi
1.19916 ++
1.19917 ++rm -f conf$$ conf$$.exe conf$$.file
1.19918 ++if test -d conf$$.dir; then
1.19919 ++ rm -f conf$$.dir/conf$$.file
1.19920 ++else
1.19921 ++ rm -f conf$$.dir
1.19922 ++ mkdir conf$$.dir
1.19923 ++fi
1.19924 ++echo >conf$$.file
1.19925 ++if ln -s conf$$.file conf$$ 2>/dev/null; then
1.19926 ++ as_ln_s='ln -s'
1.19927 ++ # ... but there are two gotchas:
1.19928 ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
1.19929 ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
1.19930 ++ # In both cases, we have to default to `cp -p'.
1.19931 ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
1.19932 ++ as_ln_s='cp -p'
1.19933 ++elif ln conf$$.file conf$$ 2>/dev/null; then
1.19934 ++ as_ln_s=ln
1.19935 ++else
1.19936 ++ as_ln_s='cp -p'
1.19937 ++fi
1.19938 ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
1.19939 ++rmdir conf$$.dir 2>/dev/null
1.19940 ++
1.19941 ++if mkdir -p . 2>/dev/null; then
1.19942 ++ as_mkdir_p=:
1.19943 ++else
1.19944 ++ test -d ./-p && rmdir ./-p
1.19945 ++ as_mkdir_p=false
1.19946 ++fi
1.19947 ++
1.19948 ++if test -x / >/dev/null 2>&1; then
1.19949 ++ as_test_x='test -x'
1.19950 ++else
1.19951 ++ if ls -dL / >/dev/null 2>&1; then
1.19952 ++ as_ls_L_option=L
1.19953 ++ else
1.19954 ++ as_ls_L_option=
1.19955 ++ fi
1.19956 ++ as_test_x='
1.19957 ++ eval sh -c '\''
1.19958 ++ if test -d "$1"; then
1.19959 ++ test -d "$1/.";
1.19960 ++ else
1.19961 ++ case $1 in
1.19962 ++ -*)set "./$1";;
1.19963 ++ esac;
1.19964 ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
1.19965 ++ ???[sx]*):;;*)false;;esac;fi
1.19966 ++ '\'' sh
1.19967 ++ '
1.19968 ++fi
1.19969 ++as_executable_p=$as_test_x
1.19970 ++
1.19971 ++# Sed expression to map a string onto a valid CPP name.
1.19972 ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1.19973 ++
1.19974 ++# Sed expression to map a string onto a valid variable name.
1.19975 ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1.19976 ++
1.19977 ++
1.19978 ++exec 6>&1
1.19979 ++
1.19980 ++# Save the log message, to keep $[0] and so on meaningful, and to
1.19981 ++# report actual input values of CONFIG_FILES etc. instead of their
1.19982 ++# values after options handling.
1.19983 ++ac_log="
1.19984 ++This file was extended by newlib $as_me NEWLIB_VERSION, which was
1.19985 ++generated by GNU Autoconf 2.61. Invocation command line was
1.19986 ++
1.19987 ++ CONFIG_FILES = $CONFIG_FILES
1.19988 ++ CONFIG_HEADERS = $CONFIG_HEADERS
1.19989 ++ CONFIG_LINKS = $CONFIG_LINKS
1.19990 ++ CONFIG_COMMANDS = $CONFIG_COMMANDS
1.19991 ++ $ $0 $@
1.19992 ++
1.19993 ++on `(hostname || uname -n) 2>/dev/null | sed 1q`
1.19994 ++"
1.19995 ++
1.19996 ++_ACEOF
1.19997 ++
1.19998 ++cat >>$CONFIG_STATUS <<_ACEOF
1.19999 ++# Files that config.status was made for.
1.20000 ++config_files="$ac_config_files"
1.20001 ++
1.20002 ++_ACEOF
1.20003 ++
1.20004 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.20005 ++ac_cs_usage="\
1.20006 ++\`$as_me' instantiates files from templates according to the
1.20007 ++current configuration.
1.20008 ++
1.20009 ++Usage: $0 [OPTIONS] [FILE]...
1.20010 ++
1.20011 ++ -h, --help print this help, then exit
1.20012 ++ -V, --version print version number and configuration settings, then exit
1.20013 ++ -q, --quiet do not print progress messages
1.20014 ++ -d, --debug don't remove temporary files
1.20015 ++ --recheck update $as_me by reconfiguring in the same conditions
1.20016 ++ --file=FILE[:TEMPLATE]
1.20017 ++ instantiate the configuration file FILE
1.20018 ++
1.20019 ++Configuration files:
1.20020 ++$config_files
1.20021 ++
1.20022 ++Report bugs to <bug-autoconf@gnu.org>."
1.20023 ++
1.20024 ++_ACEOF
1.20025 ++cat >>$CONFIG_STATUS <<_ACEOF
1.20026 ++ac_cs_version="\\
1.20027 ++newlib config.status NEWLIB_VERSION
1.20028 ++configured by $0, generated by GNU Autoconf 2.61,
1.20029 ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
1.20030 ++
1.20031 ++Copyright (C) 2006 Free Software Foundation, Inc.
1.20032 ++This config.status script is free software; the Free Software Foundation
1.20033 ++gives unlimited permission to copy, distribute and modify it."
1.20034 ++
1.20035 ++ac_pwd='$ac_pwd'
1.20036 ++srcdir='$srcdir'
1.20037 ++INSTALL='$INSTALL'
1.20038 ++_ACEOF
1.20039 ++
1.20040 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.20041 ++# If no file are specified by the user, then we need to provide default
1.20042 ++# value. By we need to know if files were specified by the user.
1.20043 ++ac_need_defaults=:
1.20044 ++while test $# != 0
1.20045 ++do
1.20046 ++ case $1 in
1.20047 ++ --*=*)
1.20048 ++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
1.20049 ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
1.20050 ++ ac_shift=:
1.20051 ++ ;;
1.20052 ++ *)
1.20053 ++ ac_option=$1
1.20054 ++ ac_optarg=$2
1.20055 ++ ac_shift=shift
1.20056 ++ ;;
1.20057 ++ esac
1.20058 ++
1.20059 ++ case $ac_option in
1.20060 ++ # Handling of the options.
1.20061 ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
1.20062 ++ ac_cs_recheck=: ;;
1.20063 ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
1.20064 ++ echo "$ac_cs_version"; exit ;;
1.20065 ++ --debug | --debu | --deb | --de | --d | -d )
1.20066 ++ debug=: ;;
1.20067 ++ --file | --fil | --fi | --f )
1.20068 ++ $ac_shift
1.20069 ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
1.20070 ++ ac_need_defaults=false;;
1.20071 ++ --he | --h | --help | --hel | -h )
1.20072 ++ echo "$ac_cs_usage"; exit ;;
1.20073 ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.20074 ++ | -silent | --silent | --silen | --sile | --sil | --si | --s)
1.20075 ++ ac_cs_silent=: ;;
1.20076 ++
1.20077 ++ # This is an error.
1.20078 ++ -*) { echo "$as_me: error: unrecognized option: $1
1.20079 ++Try \`$0 --help' for more information." >&2
1.20080 ++ { (exit 1); exit 1; }; } ;;
1.20081 ++
1.20082 ++ *) ac_config_targets="$ac_config_targets $1"
1.20083 ++ ac_need_defaults=false ;;
1.20084 ++
1.20085 ++ esac
1.20086 ++ shift
1.20087 ++done
1.20088 ++
1.20089 ++ac_configure_extra_args=
1.20090 ++
1.20091 ++if $ac_cs_silent; then
1.20092 ++ exec 6>/dev/null
1.20093 ++ ac_configure_extra_args="$ac_configure_extra_args --silent"
1.20094 ++fi
1.20095 ++
1.20096 ++_ACEOF
1.20097 ++cat >>$CONFIG_STATUS <<_ACEOF
1.20098 ++if \$ac_cs_recheck; then
1.20099 ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
1.20100 ++ CONFIG_SHELL=$SHELL
1.20101 ++ export CONFIG_SHELL
1.20102 ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
1.20103 ++fi
1.20104 ++
1.20105 ++_ACEOF
1.20106 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.20107 ++exec 5>>config.log
1.20108 ++{
1.20109 ++ echo
1.20110 ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1.20111 ++## Running $as_me. ##
1.20112 ++_ASBOX
1.20113 ++ echo "$ac_log"
1.20114 ++} >&5
1.20115 ++
1.20116 ++_ACEOF
1.20117 ++cat >>$CONFIG_STATUS <<_ACEOF
1.20118 ++_ACEOF
1.20119 ++
1.20120 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.20121 ++
1.20122 ++# Handling of arguments.
1.20123 ++for ac_config_target in $ac_config_targets
1.20124 ++do
1.20125 ++ case $ac_config_target in
1.20126 ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
1.20127 ++
1.20128 ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
1.20129 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
1.20130 ++ { (exit 1); exit 1; }; };;
1.20131 ++ esac
1.20132 ++done
1.20133 ++
1.20134 ++
1.20135 ++# If the user did not use the arguments to specify the items to instantiate,
1.20136 ++# then the envvar interface is used. Set only those that are not.
1.20137 ++# We use the long form for the default assignment because of an extremely
1.20138 ++# bizarre bug on SunOS 4.1.3.
1.20139 ++if $ac_need_defaults; then
1.20140 ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
1.20141 ++fi
1.20142 ++
1.20143 ++# Have a temporary directory for convenience. Make it in the build tree
1.20144 ++# simply because there is no reason against having it here, and in addition,
1.20145 ++# creating and moving files from /tmp can sometimes cause problems.
1.20146 ++# Hook for its removal unless debugging.
1.20147 ++# Note that there is a small window in which the directory will not be cleaned:
1.20148 ++# after its creation but before its name has been assigned to `$tmp'.
1.20149 ++$debug ||
1.20150 ++{
1.20151 ++ tmp=
1.20152 ++ trap 'exit_status=$?
1.20153 ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
1.20154 ++' 0
1.20155 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15
1.20156 ++}
1.20157 ++# Create a (secure) tmp directory for tmp files.
1.20158 ++
1.20159 ++{
1.20160 ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
1.20161 ++ test -n "$tmp" && test -d "$tmp"
1.20162 ++} ||
1.20163 ++{
1.20164 ++ tmp=./conf$$-$RANDOM
1.20165 ++ (umask 077 && mkdir "$tmp")
1.20166 ++} ||
1.20167 ++{
1.20168 ++ echo "$me: cannot create a temporary directory in ." >&2
1.20169 ++ { (exit 1); exit 1; }
1.20170 ++}
1.20171 ++
1.20172 ++#
1.20173 ++# Set up the sed scripts for CONFIG_FILES section.
1.20174 ++#
1.20175 ++
1.20176 ++# No need to generate the scripts if there are no CONFIG_FILES.
1.20177 ++# This happens for instance when ./config.status config.h
1.20178 ++if test -n "$CONFIG_FILES"; then
1.20179 ++
1.20180 ++_ACEOF
1.20181 ++
1.20182 ++
1.20183 ++
1.20184 ++ac_delim='%!_!# '
1.20185 ++for ac_last_try in false false false false false :; do
1.20186 ++ cat >conf$$subs.sed <<_ACEOF
1.20187 ++SHELL!$SHELL$ac_delim
1.20188 ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
1.20189 ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim
1.20190 ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
1.20191 ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
1.20192 ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim
1.20193 ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
1.20194 ++exec_prefix!$exec_prefix$ac_delim
1.20195 ++prefix!$prefix$ac_delim
1.20196 ++program_transform_name!$program_transform_name$ac_delim
1.20197 ++bindir!$bindir$ac_delim
1.20198 ++sbindir!$sbindir$ac_delim
1.20199 ++libexecdir!$libexecdir$ac_delim
1.20200 ++datarootdir!$datarootdir$ac_delim
1.20201 ++datadir!$datadir$ac_delim
1.20202 ++sysconfdir!$sysconfdir$ac_delim
1.20203 ++sharedstatedir!$sharedstatedir$ac_delim
1.20204 ++localstatedir!$localstatedir$ac_delim
1.20205 ++includedir!$includedir$ac_delim
1.20206 ++oldincludedir!$oldincludedir$ac_delim
1.20207 ++docdir!$docdir$ac_delim
1.20208 ++infodir!$infodir$ac_delim
1.20209 ++htmldir!$htmldir$ac_delim
1.20210 ++dvidir!$dvidir$ac_delim
1.20211 ++pdfdir!$pdfdir$ac_delim
1.20212 ++psdir!$psdir$ac_delim
1.20213 ++libdir!$libdir$ac_delim
1.20214 ++localedir!$localedir$ac_delim
1.20215 ++mandir!$mandir$ac_delim
1.20216 ++DEFS!$DEFS$ac_delim
1.20217 ++ECHO_C!$ECHO_C$ac_delim
1.20218 ++ECHO_N!$ECHO_N$ac_delim
1.20219 ++ECHO_T!$ECHO_T$ac_delim
1.20220 ++LIBS!$LIBS$ac_delim
1.20221 ++build_alias!$build_alias$ac_delim
1.20222 ++host_alias!$host_alias$ac_delim
1.20223 ++target_alias!$target_alias$ac_delim
1.20224 ++MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim
1.20225 ++MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim
1.20226 ++newlib_basedir!$newlib_basedir$ac_delim
1.20227 ++build!$build$ac_delim
1.20228 ++build_cpu!$build_cpu$ac_delim
1.20229 ++build_vendor!$build_vendor$ac_delim
1.20230 ++build_os!$build_os$ac_delim
1.20231 ++host!$host$ac_delim
1.20232 ++host_cpu!$host_cpu$ac_delim
1.20233 ++host_vendor!$host_vendor$ac_delim
1.20234 ++host_os!$host_os$ac_delim
1.20235 ++target!$target$ac_delim
1.20236 ++target_cpu!$target_cpu$ac_delim
1.20237 ++target_vendor!$target_vendor$ac_delim
1.20238 ++target_os!$target_os$ac_delim
1.20239 ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
1.20240 ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
1.20241 ++INSTALL_DATA!$INSTALL_DATA$ac_delim
1.20242 ++PACKAGE!$PACKAGE$ac_delim
1.20243 ++VERSION!$VERSION$ac_delim
1.20244 ++ACLOCAL!$ACLOCAL$ac_delim
1.20245 ++AUTOCONF!$AUTOCONF$ac_delim
1.20246 ++AUTOMAKE!$AUTOMAKE$ac_delim
1.20247 ++AUTOHEADER!$AUTOHEADER$ac_delim
1.20248 ++MAKEINFO!$MAKEINFO$ac_delim
1.20249 ++SET_MAKE!$SET_MAKE$ac_delim
1.20250 ++CC!$CC$ac_delim
1.20251 ++AS!$AS$ac_delim
1.20252 ++AR!$AR$ac_delim
1.20253 ++RANLIB!$RANLIB$ac_delim
1.20254 ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
1.20255 ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
1.20256 ++MAINT!$MAINT$ac_delim
1.20257 ++NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim
1.20258 ++LDFLAGS!$LDFLAGS$ac_delim
1.20259 ++ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim
1.20260 ++ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim
1.20261 ++ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim
1.20262 ++ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim
1.20263 ++ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim
1.20264 ++ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim
1.20265 ++ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim
1.20266 ++ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim
1.20267 ++ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim
1.20268 ++ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim
1.20269 ++USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim
1.20270 ++USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim
1.20271 ++OBJEXT!$OBJEXT$ac_delim
1.20272 ++oext!$oext$ac_delim
1.20273 ++aext!$aext$ac_delim
1.20274 ++libm_machine_dir!$libm_machine_dir$ac_delim
1.20275 ++machine_dir!$machine_dir$ac_delim
1.20276 ++sys_dir!$sys_dir$ac_delim
1.20277 ++LIBOBJS!$LIBOBJS$ac_delim
1.20278 ++LTLIBOBJS!$LTLIBOBJS$ac_delim
1.20279 ++_ACEOF
1.20280 ++
1.20281 ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then
1.20282 ++ break
1.20283 ++ elif $ac_last_try; then
1.20284 ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
1.20285 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
1.20286 ++ { (exit 1); exit 1; }; }
1.20287 ++ else
1.20288 ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
1.20289 ++ fi
1.20290 ++done
1.20291 ++
1.20292 ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
1.20293 ++if test -n "$ac_eof"; then
1.20294 ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
1.20295 ++ ac_eof=`expr $ac_eof + 1`
1.20296 ++fi
1.20297 ++
1.20298 ++cat >>$CONFIG_STATUS <<_ACEOF
1.20299 ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
1.20300 ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
1.20301 ++_ACEOF
1.20302 ++sed '
1.20303 ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
1.20304 ++s/^/s,@/; s/!/@,|#_!!_#|/
1.20305 ++:n
1.20306 ++t n
1.20307 ++s/'"$ac_delim"'$/,g/; t
1.20308 ++s/$/\\/; p
1.20309 ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
1.20310 ++' >>$CONFIG_STATUS <conf$$subs.sed
1.20311 ++rm -f conf$$subs.sed
1.20312 ++cat >>$CONFIG_STATUS <<_ACEOF
1.20313 ++:end
1.20314 ++s/|#_!!_#|//g
1.20315 ++CEOF$ac_eof
1.20316 ++_ACEOF
1.20317 ++
1.20318 ++
1.20319 ++# VPATH may cause trouble with some makes, so we remove $(srcdir),
1.20320 ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1.20321 ++# trailing colons and then remove the whole line if VPATH becomes empty
1.20322 ++# (actually we leave an empty line to preserve line numbers).
1.20323 ++if test "x$srcdir" = x.; then
1.20324 ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
1.20325 ++s/:*\$(srcdir):*/:/
1.20326 ++s/:*\${srcdir}:*/:/
1.20327 ++s/:*@srcdir@:*/:/
1.20328 ++s/^\([^=]*=[ ]*\):*/\1/
1.20329 ++s/:*$//
1.20330 ++s/^[^=]*=[ ]*$//
1.20331 ++}'
1.20332 ++fi
1.20333 ++
1.20334 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.20335 ++fi # test -n "$CONFIG_FILES"
1.20336 ++
1.20337 ++
1.20338 ++for ac_tag in :F $CONFIG_FILES
1.20339 ++do
1.20340 ++ case $ac_tag in
1.20341 ++ :[FHLC]) ac_mode=$ac_tag; continue;;
1.20342 ++ esac
1.20343 ++ case $ac_mode$ac_tag in
1.20344 ++ :[FHL]*:*);;
1.20345 ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
1.20346 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;}
1.20347 ++ { (exit 1); exit 1; }; };;
1.20348 ++ :[FH]-) ac_tag=-:-;;
1.20349 ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
1.20350 ++ esac
1.20351 ++ ac_save_IFS=$IFS
1.20352 ++ IFS=:
1.20353 ++ set x $ac_tag
1.20354 ++ IFS=$ac_save_IFS
1.20355 ++ shift
1.20356 ++ ac_file=$1
1.20357 ++ shift
1.20358 ++
1.20359 ++ case $ac_mode in
1.20360 ++ :L) ac_source=$1;;
1.20361 ++ :[FH])
1.20362 ++ ac_file_inputs=
1.20363 ++ for ac_f
1.20364 ++ do
1.20365 ++ case $ac_f in
1.20366 ++ -) ac_f="$tmp/stdin";;
1.20367 ++ *) # Look for the file first in the build tree, then in the source tree
1.20368 ++ # (if the path is not absolute). The absolute path cannot be DOS-style,
1.20369 ++ # because $ac_f cannot contain `:'.
1.20370 ++ test -f "$ac_f" ||
1.20371 ++ case $ac_f in
1.20372 ++ [\\/$]*) false;;
1.20373 ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
1.20374 ++ esac ||
1.20375 ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
1.20376 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;}
1.20377 ++ { (exit 1); exit 1; }; };;
1.20378 ++ esac
1.20379 ++ ac_file_inputs="$ac_file_inputs $ac_f"
1.20380 ++ done
1.20381 ++
1.20382 ++ # Let's still pretend it is `configure' which instantiates (i.e., don't
1.20383 ++ # use $as_me), people would be surprised to read:
1.20384 ++ # /* config.h. Generated by config.status. */
1.20385 ++ configure_input="Generated from "`IFS=:
1.20386 ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
1.20387 ++ if test x"$ac_file" != x-; then
1.20388 ++ configure_input="$ac_file. $configure_input"
1.20389 ++ { echo "$as_me:$LINENO: creating $ac_file" >&5
1.20390 ++echo "$as_me: creating $ac_file" >&6;}
1.20391 ++ fi
1.20392 ++
1.20393 ++ case $ac_tag in
1.20394 ++ *:-:* | *:-) cat >"$tmp/stdin";;
1.20395 ++ esac
1.20396 ++ ;;
1.20397 ++ esac
1.20398 ++
1.20399 ++ ac_dir=`$as_dirname -- "$ac_file" ||
1.20400 ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.20401 ++ X"$ac_file" : 'X\(//\)[^/]' \| \
1.20402 ++ X"$ac_file" : 'X\(//\)$' \| \
1.20403 ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
1.20404 ++echo X"$ac_file" |
1.20405 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.20406 ++ s//\1/
1.20407 ++ q
1.20408 ++ }
1.20409 ++ /^X\(\/\/\)[^/].*/{
1.20410 ++ s//\1/
1.20411 ++ q
1.20412 ++ }
1.20413 ++ /^X\(\/\/\)$/{
1.20414 ++ s//\1/
1.20415 ++ q
1.20416 ++ }
1.20417 ++ /^X\(\/\).*/{
1.20418 ++ s//\1/
1.20419 ++ q
1.20420 ++ }
1.20421 ++ s/.*/./; q'`
1.20422 ++ { as_dir="$ac_dir"
1.20423 ++ case $as_dir in #(
1.20424 ++ -*) as_dir=./$as_dir;;
1.20425 ++ esac
1.20426 ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
1.20427 ++ as_dirs=
1.20428 ++ while :; do
1.20429 ++ case $as_dir in #(
1.20430 ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
1.20431 ++ *) as_qdir=$as_dir;;
1.20432 ++ esac
1.20433 ++ as_dirs="'$as_qdir' $as_dirs"
1.20434 ++ as_dir=`$as_dirname -- "$as_dir" ||
1.20435 ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.20436 ++ X"$as_dir" : 'X\(//\)[^/]' \| \
1.20437 ++ X"$as_dir" : 'X\(//\)$' \| \
1.20438 ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
1.20439 ++echo X"$as_dir" |
1.20440 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.20441 ++ s//\1/
1.20442 ++ q
1.20443 ++ }
1.20444 ++ /^X\(\/\/\)[^/].*/{
1.20445 ++ s//\1/
1.20446 ++ q
1.20447 ++ }
1.20448 ++ /^X\(\/\/\)$/{
1.20449 ++ s//\1/
1.20450 ++ q
1.20451 ++ }
1.20452 ++ /^X\(\/\).*/{
1.20453 ++ s//\1/
1.20454 ++ q
1.20455 ++ }
1.20456 ++ s/.*/./; q'`
1.20457 ++ test -d "$as_dir" && break
1.20458 ++ done
1.20459 ++ test -z "$as_dirs" || eval "mkdir $as_dirs"
1.20460 ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
1.20461 ++echo "$as_me: error: cannot create directory $as_dir" >&2;}
1.20462 ++ { (exit 1); exit 1; }; }; }
1.20463 ++ ac_builddir=.
1.20464 ++
1.20465 ++case "$ac_dir" in
1.20466 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.20467 ++*)
1.20468 ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.20469 ++ # A ".." for each directory in $ac_dir_suffix.
1.20470 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.20471 ++ case $ac_top_builddir_sub in
1.20472 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.20473 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.20474 ++ esac ;;
1.20475 ++esac
1.20476 ++ac_abs_top_builddir=$ac_pwd
1.20477 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.20478 ++# for backward compatibility:
1.20479 ++ac_top_builddir=$ac_top_build_prefix
1.20480 ++
1.20481 ++case $srcdir in
1.20482 ++ .) # We are building in place.
1.20483 ++ ac_srcdir=.
1.20484 ++ ac_top_srcdir=$ac_top_builddir_sub
1.20485 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.20486 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.20487 ++ ac_srcdir=$srcdir$ac_dir_suffix;
1.20488 ++ ac_top_srcdir=$srcdir
1.20489 ++ ac_abs_top_srcdir=$srcdir ;;
1.20490 ++ *) # Relative name.
1.20491 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.20492 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.20493 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.20494 ++esac
1.20495 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.20496 ++
1.20497 ++
1.20498 ++ case $ac_mode in
1.20499 ++ :F)
1.20500 ++ #
1.20501 ++ # CONFIG_FILE
1.20502 ++ #
1.20503 ++
1.20504 ++ case $INSTALL in
1.20505 ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
1.20506 ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
1.20507 ++ esac
1.20508 ++_ACEOF
1.20509 ++
1.20510 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.20511 ++# If the template does not know about datarootdir, expand it.
1.20512 ++# FIXME: This hack should be removed a few years after 2.60.
1.20513 ++ac_datarootdir_hack=; ac_datarootdir_seen=
1.20514 ++
1.20515 ++case `sed -n '/datarootdir/ {
1.20516 ++ p
1.20517 ++ q
1.20518 ++}
1.20519 ++/@datadir@/p
1.20520 ++/@docdir@/p
1.20521 ++/@infodir@/p
1.20522 ++/@localedir@/p
1.20523 ++/@mandir@/p
1.20524 ++' $ac_file_inputs` in
1.20525 ++*datarootdir*) ac_datarootdir_seen=yes;;
1.20526 ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
1.20527 ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
1.20528 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
1.20529 ++_ACEOF
1.20530 ++cat >>$CONFIG_STATUS <<_ACEOF
1.20531 ++ ac_datarootdir_hack='
1.20532 ++ s&@datadir@&$datadir&g
1.20533 ++ s&@docdir@&$docdir&g
1.20534 ++ s&@infodir@&$infodir&g
1.20535 ++ s&@localedir@&$localedir&g
1.20536 ++ s&@mandir@&$mandir&g
1.20537 ++ s&\\\${datarootdir}&$datarootdir&g' ;;
1.20538 ++esac
1.20539 ++_ACEOF
1.20540 ++
1.20541 ++# Neutralize VPATH when `$srcdir' = `.'.
1.20542 ++# Shell code in configure.ac might set extrasub.
1.20543 ++# FIXME: do we really want to maintain this feature?
1.20544 ++cat >>$CONFIG_STATUS <<_ACEOF
1.20545 ++ sed "$ac_vpsub
1.20546 ++$extrasub
1.20547 ++_ACEOF
1.20548 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.20549 ++:t
1.20550 ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
1.20551 ++s&@configure_input@&$configure_input&;t t
1.20552 ++s&@top_builddir@&$ac_top_builddir_sub&;t t
1.20553 ++s&@srcdir@&$ac_srcdir&;t t
1.20554 ++s&@abs_srcdir@&$ac_abs_srcdir&;t t
1.20555 ++s&@top_srcdir@&$ac_top_srcdir&;t t
1.20556 ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
1.20557 ++s&@builddir@&$ac_builddir&;t t
1.20558 ++s&@abs_builddir@&$ac_abs_builddir&;t t
1.20559 ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
1.20560 ++s&@INSTALL@&$ac_INSTALL&;t t
1.20561 ++$ac_datarootdir_hack
1.20562 ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
1.20563 ++
1.20564 ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
1.20565 ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
1.20566 ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
1.20567 ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
1.20568 ++which seems to be undefined. Please make sure it is defined." >&5
1.20569 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
1.20570 ++which seems to be undefined. Please make sure it is defined." >&2;}
1.20571 ++
1.20572 ++ rm -f "$tmp/stdin"
1.20573 ++ case $ac_file in
1.20574 ++ -) cat "$tmp/out"; rm -f "$tmp/out";;
1.20575 ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
1.20576 ++ esac
1.20577 ++ ;;
1.20578 ++
1.20579 ++
1.20580 ++
1.20581 ++ esac
1.20582 ++
1.20583 ++done # for ac_tag
1.20584 ++
1.20585 ++
1.20586 ++{ (exit 0); exit 0; }
1.20587 ++_ACEOF
1.20588 ++chmod +x $CONFIG_STATUS
1.20589 ++ac_clean_files=$ac_clean_files_save
1.20590 ++
1.20591 ++
1.20592 ++# configure is writing to config.log, and then calls config.status.
1.20593 ++# config.status does its own redirection, appending to config.log.
1.20594 ++# Unfortunately, on DOS this fails, as config.log is still kept open
1.20595 ++# by configure, so config.status won't be able to write to it; its
1.20596 ++# output is simply discarded. So we exec the FD to /dev/null,
1.20597 ++# effectively closing config.log, so it can be properly (re)opened and
1.20598 ++# appended to by config.status. When coming back to configure, we
1.20599 ++# need to make the FD available again.
1.20600 ++if test "$no_create" != yes; then
1.20601 ++ ac_cs_success=:
1.20602 ++ ac_config_status_args=
1.20603 ++ test "$silent" = yes &&
1.20604 ++ ac_config_status_args="$ac_config_status_args --quiet"
1.20605 ++ exec 5>/dev/null
1.20606 ++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
1.20607 ++ exec 5>>config.log
1.20608 ++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
1.20609 ++ # would make configure fail if this is the last instruction.
1.20610 ++ $ac_cs_success || { (exit 1); exit 1; }
1.20611 ++fi
1.20612 ++
1.20613 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure.in newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in
1.20614 +--- newlib-1.17.0/newlib/libc/sys/avr32/configure.in 1970-01-01 01:00:00.000000000 +0100
1.20615 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in 2009-05-22 09:57:50.000000000 +0200
1.20616 +@@ -0,0 +1,13 @@
1.20617 ++dnl This is the newlib/libc/sys/avr32 configure.in file.
1.20618 ++dnl Process this file with autoconf to produce a configure script.
1.20619 ++
1.20620 ++AC_PREREQ(2.59)
1.20621 ++AC_INIT([newlib],[NEWLIB_VERSION])
1.20622 ++
1.20623 ++dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake.
1.20624 ++AC_CONFIG_AUX_DIR(../../../..)
1.20625 ++
1.20626 ++NEWLIB_CONFIGURE(../../..)
1.20627 ++
1.20628 ++AC_CONFIG_FILES([Makefile])
1.20629 ++AC_OUTPUT
1.20630 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/crt0.S newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S
1.20631 +--- newlib-1.17.0/newlib/libc/sys/avr32/crt0.S 1970-01-01 01:00:00.000000000 +0100
1.20632 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S 2009-05-22 09:57:50.000000000 +0200
1.20633 +@@ -0,0 +1,83 @@
1.20634 ++
1.20635 ++ .section .reset,"ax"
1.20636 ++
1.20637 ++ .global _start
1.20638 ++ .type _start,@function
1.20639 ++_start:
1.20640 ++ /* Jump to wherever the linker thinks we are... */
1.20641 ++ lddpc pc, .Ltext_vaddr
1.20642 ++
1.20643 ++ .align 2
1.20644 ++.Ltext_vaddr:
1.20645 ++ .word _stext
1.20646 ++
1.20647 ++ .text
1.20648 ++ .global _stext
1.20649 ++_stext:
1.20650 ++ /* Zero marks the end of the outermost frame. */
1.20651 ++ mov r7, 0
1.20652 ++
1.20653 ++ /* Set up the stack pointer to a fixed value */
1.20654 ++ lda.w r10, _estack
1.20655 ++
1.20656 ++ /* If _stack is -1 don't set sp, the stack is then probably
1.20657 ++ set by some other means i.e. by a bootloader. */
1.20658 ++ cp r10, -1
1.20659 ++ movne sp, r10
1.20660 ++
1.20661 ++ /* Copy the data segment into RAM if necessary. If data_lma
1.20662 ++ is equal to data then VMA==LMA and no copying is necessary.
1.20663 ++ The linker script must make sure that the data segment is at
1.20664 ++ least dword-aligned. */
1.20665 ++ lda.w r11, _data_lma
1.20666 ++ lda.w r12, _data
1.20667 ++ cp.w r11, r12
1.20668 ++ breq 1f
1.20669 ++ lda.w r10, _edata
1.20670 ++2: ld.d r8, r11++
1.20671 ++ st.d r12++, r8
1.20672 ++ cp.w r12, r10
1.20673 ++ brlt 2b
1.20674 ++
1.20675 ++ /* Zero the memory in the .bss section. */
1.20676 ++1: lda.w r10, _end
1.20677 ++ lda.w r12, _edata
1.20678 ++
1.20679 ++ mov r8, 0
1.20680 ++ mov r9, 0
1.20681 ++2: st.d r12++, r8
1.20682 ++ cp.w r12, r10
1.20683 ++ brlt 2b
1.20684 ++
1.20685 ++ /* User dependent initialization */
1.20686 ++ call _init_startup
1.20687 ++
1.20688 ++ /* Register _fini function with atexit
1.20689 ++ The _fini function is responsible for calling destructiors */
1.20690 ++ lda.w r12, _fini
1.20691 ++ call atexit
1.20692 ++
1.20693 ++ /* Call _init in order to initialize constructors etc */
1.20694 ++ call _init
1.20695 ++
1.20696 ++ /*Initialize argv, use stack for keeping arguments.
1.20697 ++ _init_argv() returns argc in r12 and argv in r11
1.20698 ++ and the total size used for the arguments in r10.*/
1.20699 ++ mov r12, sp
1.20700 ++ /* Signal that we are storing the arguments in a stackwise
1.20701 ++ top down approach. */
1.20702 ++ mov r11, 0
1.20703 ++ call _init_argv
1.20704 ++ /* If initialization if argv is not handled then _init_argv
1.20705 ++ returns -1 so set argc to 0 and make sure no space is
1.20706 ++ allocated on the stack. */
1.20707 ++ cp.w r12, -1
1.20708 ++ moveq r12, 0
1.20709 ++ moveq r10, 0
1.20710 ++ sub sp, r10
1.20711 ++
1.20712 ++ /* Call main and call exit when it returns */
1.20713 ++ call main
1.20714 ++ call exit
1.20715 ++
1.20716 ++ .weak _data_lma
1.20717 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am
1.20718 +--- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am 1970-01-01 01:00:00.000000000 +0100
1.20719 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am 2009-05-22 09:57:50.000000000 +0200
1.20720 +@@ -0,0 +1,18 @@
1.20721 ++## Process this file with automake to generate Makefile.in
1.20722 ++
1.20723 ++AUTOMAKE_OPTIONS = cygnus
1.20724 ++
1.20725 ++INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
1.20726 ++
1.20727 ++AM_CCASFLAGS = $(INCLUDES)
1.20728 ++
1.20729 ++noinst_LIBRARIES = lib.a
1.20730 ++
1.20731 ++lib_a_SOURCES = syscalls.c setjmp.S
1.20732 ++lib_a_CCASFLAGS = $(AM_CCASFLAGS)
1.20733 ++lib_a_CFLAGS = $(AM_CFLAGS)
1.20734 ++
1.20735 ++all: crt0.o
1.20736 ++
1.20737 ++ACLOCAL_AMFLAGS = -I ../../..
1.20738 ++CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
1.20739 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in
1.20740 +--- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in 1970-01-01 01:00:00.000000000 +0100
1.20741 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in 2009-05-22 09:57:50.000000000 +0200
1.20742 +@@ -0,0 +1,329 @@
1.20743 ++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
1.20744 ++
1.20745 ++# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
1.20746 ++# This Makefile.in is free software; the Free Software Foundation
1.20747 ++# gives unlimited permission to copy and/or distribute it,
1.20748 ++# with or without modifications, as long as this notice is preserved.
1.20749 ++
1.20750 ++# This program is distributed in the hope that it will be useful,
1.20751 ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
1.20752 ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
1.20753 ++# PARTICULAR PURPOSE.
1.20754 ++
1.20755 ++
1.20756 ++SHELL = @SHELL@
1.20757 ++
1.20758 ++srcdir = @srcdir@
1.20759 ++top_srcdir = @top_srcdir@
1.20760 ++VPATH = @srcdir@
1.20761 ++prefix = @prefix@
1.20762 ++exec_prefix = @exec_prefix@
1.20763 ++
1.20764 ++bindir = @bindir@
1.20765 ++sbindir = @sbindir@
1.20766 ++libexecdir = @libexecdir@
1.20767 ++datadir = @datadir@
1.20768 ++sysconfdir = @sysconfdir@
1.20769 ++sharedstatedir = @sharedstatedir@
1.20770 ++localstatedir = @localstatedir@
1.20771 ++libdir = @libdir@
1.20772 ++infodir = @infodir@
1.20773 ++mandir = @mandir@
1.20774 ++includedir = @includedir@
1.20775 ++oldincludedir = /usr/include
1.20776 ++
1.20777 ++DESTDIR =
1.20778 ++
1.20779 ++pkgdatadir = $(datadir)/@PACKAGE@
1.20780 ++pkglibdir = $(libdir)/@PACKAGE@
1.20781 ++pkgincludedir = $(includedir)/@PACKAGE@
1.20782 ++
1.20783 ++top_builddir = .
1.20784 ++
1.20785 ++ACLOCAL = @ACLOCAL@
1.20786 ++AUTOCONF = @AUTOCONF@
1.20787 ++AUTOMAKE = @AUTOMAKE@
1.20788 ++AUTOHEADER = @AUTOHEADER@
1.20789 ++
1.20790 ++INSTALL = @INSTALL@
1.20791 ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
1.20792 ++INSTALL_DATA = @INSTALL_DATA@
1.20793 ++INSTALL_SCRIPT = @INSTALL_SCRIPT@
1.20794 ++transform = @program_transform_name@
1.20795 ++
1.20796 ++NORMAL_INSTALL = :
1.20797 ++PRE_INSTALL = :
1.20798 ++POST_INSTALL = :
1.20799 ++NORMAL_UNINSTALL = :
1.20800 ++PRE_UNINSTALL = :
1.20801 ++POST_UNINSTALL = :
1.20802 ++build_alias = @build_alias@
1.20803 ++build_triplet = @build@
1.20804 ++host_alias = @host_alias@
1.20805 ++host_triplet = @host@
1.20806 ++target_alias = @target_alias@
1.20807 ++target_triplet = @target@
1.20808 ++AR = @AR@
1.20809 ++AS = @AS@
1.20810 ++CC = @CC@
1.20811 ++CPP = @CPP@
1.20812 ++EXEEXT = @EXEEXT@
1.20813 ++LDFLAGS = @LDFLAGS@
1.20814 ++MAINT = @MAINT@
1.20815 ++MAKEINFO = @MAKEINFO@
1.20816 ++NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
1.20817 ++OBJEXT = @OBJEXT@
1.20818 ++PACKAGE = @PACKAGE@
1.20819 ++RANLIB = @RANLIB@
1.20820 ++VERSION = @VERSION@
1.20821 ++aext = @aext@
1.20822 ++libm_machine_dir = @libm_machine_dir@
1.20823 ++machine_dir = @machine_dir@
1.20824 ++newlib_basedir = @newlib_basedir@
1.20825 ++oext = @oext@
1.20826 ++sys_dir = @sys_dir@
1.20827 ++
1.20828 ++AUTOMAKE_OPTIONS = cygnus
1.20829 ++
1.20830 ++INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
1.20831 ++
1.20832 ++noinst_LIBRARIES = lib.a
1.20833 ++
1.20834 ++lib_a_SOURCES = syscalls.c setjmp.S
1.20835 ++
1.20836 ++ACLOCAL_AMFLAGS = -I ../../..
1.20837 ++CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
1.20838 ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
1.20839 ++mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
1.20840 ++CONFIG_CLEAN_FILES =
1.20841 ++LIBRARIES = $(noinst_LIBRARIES)
1.20842 ++
1.20843 ++
1.20844 ++DEFS = @DEFS@ -I. -I$(srcdir)
1.20845 ++CPPFLAGS =
1.20846 ++LIBS = @LIBS@
1.20847 ++lib_a_LIBADD =
1.20848 ++lib_a_OBJECTS = syscalls.o setjmp.o
1.20849 ++CFLAGS = @CFLAGS@
1.20850 ++COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
1.20851 ++CCLD = $(CC)
1.20852 ++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
1.20853 ++DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in
1.20854 ++
1.20855 ++
1.20856 ++DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
1.20857 ++
1.20858 ++TAR = gtar
1.20859 ++GZIP_ENV = --best
1.20860 ++SOURCES = $(lib_a_SOURCES)
1.20861 ++OBJECTS = $(lib_a_OBJECTS)
1.20862 ++
1.20863 ++all: all-redirect
1.20864 ++.SUFFIXES:
1.20865 ++.SUFFIXES: .S .c .o .s
1.20866 ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
1.20867 ++ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
1.20868 ++
1.20869 ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
1.20870 ++ cd $(top_builddir) \
1.20871 ++ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
1.20872 ++
1.20873 ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \
1.20874 ++ ../../../acinclude.m4 ../../../aclocal.m4 \
1.20875 ++ ../../../libtool.m4
1.20876 ++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
1.20877 ++
1.20878 ++config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
1.20879 ++ $(SHELL) ./config.status --recheck
1.20880 ++$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
1.20881 ++ cd $(srcdir) && $(AUTOCONF)
1.20882 ++
1.20883 ++mostlyclean-noinstLIBRARIES:
1.20884 ++
1.20885 ++clean-noinstLIBRARIES:
1.20886 ++ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
1.20887 ++
1.20888 ++distclean-noinstLIBRARIES:
1.20889 ++
1.20890 ++maintainer-clean-noinstLIBRARIES:
1.20891 ++
1.20892 ++.c.o:
1.20893 ++ $(COMPILE) -c $<
1.20894 ++
1.20895 ++.s.o:
1.20896 ++ $(COMPILE) -c $<
1.20897 ++
1.20898 ++.S.o:
1.20899 ++ $(COMPILE) -c $<
1.20900 ++
1.20901 ++mostlyclean-compile:
1.20902 ++ -rm -f *.o core *.core
1.20903 ++
1.20904 ++clean-compile:
1.20905 ++
1.20906 ++distclean-compile:
1.20907 ++ -rm -f *.tab.c
1.20908 ++
1.20909 ++maintainer-clean-compile:
1.20910 ++
1.20911 ++lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
1.20912 ++ -rm -f lib.a
1.20913 ++ $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
1.20914 ++ $(RANLIB) lib.a
1.20915 ++
1.20916 ++tags: TAGS
1.20917 ++
1.20918 ++ID: $(HEADERS) $(SOURCES) $(LISP)
1.20919 ++ list='$(SOURCES) $(HEADERS)'; \
1.20920 ++ unique=`for i in $$list; do echo $$i; done | \
1.20921 ++ awk ' { files[$$0] = 1; } \
1.20922 ++ END { for (i in files) print i; }'`; \
1.20923 ++ here=`pwd` && cd $(srcdir) \
1.20924 ++ && mkid -f$$here/ID $$unique $(LISP)
1.20925 ++
1.20926 ++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
1.20927 ++ tags=; \
1.20928 ++ here=`pwd`; \
1.20929 ++ list='$(SOURCES) $(HEADERS)'; \
1.20930 ++ unique=`for i in $$list; do echo $$i; done | \
1.20931 ++ awk ' { files[$$0] = 1; } \
1.20932 ++ END { for (i in files) print i; }'`; \
1.20933 ++ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
1.20934 ++ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
1.20935 ++
1.20936 ++mostlyclean-tags:
1.20937 ++
1.20938 ++clean-tags:
1.20939 ++
1.20940 ++distclean-tags:
1.20941 ++ -rm -f TAGS ID
1.20942 ++
1.20943 ++maintainer-clean-tags:
1.20944 ++
1.20945 ++distdir = $(PACKAGE)-$(VERSION)
1.20946 ++top_distdir = $(distdir)
1.20947 ++
1.20948 ++# This target untars the dist file and tries a VPATH configuration. Then
1.20949 ++# it guarantees that the distribution is self-contained by making another
1.20950 ++# tarfile.
1.20951 ++distcheck: dist
1.20952 ++ -rm -rf $(distdir)
1.20953 ++ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
1.20954 ++ mkdir $(distdir)/=build
1.20955 ++ mkdir $(distdir)/=inst
1.20956 ++ dc_install_base=`cd $(distdir)/=inst && pwd`; \
1.20957 ++ cd $(distdir)/=build \
1.20958 ++ && ../configure --srcdir=.. --prefix=$$dc_install_base \
1.20959 ++ && $(MAKE) $(AM_MAKEFLAGS) \
1.20960 ++ && $(MAKE) $(AM_MAKEFLAGS) dvi \
1.20961 ++ && $(MAKE) $(AM_MAKEFLAGS) check \
1.20962 ++ && $(MAKE) $(AM_MAKEFLAGS) install \
1.20963 ++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1.20964 ++ && $(MAKE) $(AM_MAKEFLAGS) dist
1.20965 ++ -rm -rf $(distdir)
1.20966 ++ @banner="$(distdir).tar.gz is ready for distribution"; \
1.20967 ++ dashes=`echo "$$banner" | sed s/./=/g`; \
1.20968 ++ echo "$$dashes"; \
1.20969 ++ echo "$$banner"; \
1.20970 ++ echo "$$dashes"
1.20971 ++dist: distdir
1.20972 ++ -chmod -R a+r $(distdir)
1.20973 ++ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
1.20974 ++ -rm -rf $(distdir)
1.20975 ++dist-all: distdir
1.20976 ++ -chmod -R a+r $(distdir)
1.20977 ++ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
1.20978 ++ -rm -rf $(distdir)
1.20979 ++distdir: $(DISTFILES)
1.20980 ++ -rm -rf $(distdir)
1.20981 ++ mkdir $(distdir)
1.20982 ++ -chmod 777 $(distdir)
1.20983 ++ @for file in $(DISTFILES); do \
1.20984 ++ if test -f $$file; then d=.; else d=$(srcdir); fi; \
1.20985 ++ if test -d $$d/$$file; then \
1.20986 ++ cp -pr $$d/$$file $(distdir)/$$file; \
1.20987 ++ else \
1.20988 ++ test -f $(distdir)/$$file \
1.20989 ++ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
1.20990 ++ || cp -p $$d/$$file $(distdir)/$$file || :; \
1.20991 ++ fi; \
1.20992 ++ done
1.20993 ++info-am:
1.20994 ++info: info-am
1.20995 ++dvi-am:
1.20996 ++dvi: dvi-am
1.20997 ++check-am:
1.20998 ++check: check-am
1.20999 ++installcheck-am:
1.21000 ++installcheck: installcheck-am
1.21001 ++install-info-am:
1.21002 ++install-info: install-info-am
1.21003 ++install-exec-am:
1.21004 ++install-exec: install-exec-am
1.21005 ++
1.21006 ++install-data-am:
1.21007 ++install-data: install-data-am
1.21008 ++
1.21009 ++install-am: all-am
1.21010 ++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1.21011 ++install: install-am
1.21012 ++uninstall-am:
1.21013 ++uninstall: uninstall-am
1.21014 ++all-am: Makefile $(LIBRARIES)
1.21015 ++all-redirect: all-am
1.21016 ++install-strip:
1.21017 ++ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
1.21018 ++installdirs:
1.21019 ++
1.21020 ++
1.21021 ++mostlyclean-generic:
1.21022 ++
1.21023 ++clean-generic:
1.21024 ++
1.21025 ++distclean-generic:
1.21026 ++ -rm -f Makefile $(CONFIG_CLEAN_FILES)
1.21027 ++ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
1.21028 ++
1.21029 ++maintainer-clean-generic:
1.21030 ++mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
1.21031 ++ mostlyclean-tags mostlyclean-generic
1.21032 ++
1.21033 ++mostlyclean: mostlyclean-am
1.21034 ++
1.21035 ++clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
1.21036 ++ mostlyclean-am
1.21037 ++
1.21038 ++clean: clean-am
1.21039 ++
1.21040 ++distclean-am: distclean-noinstLIBRARIES distclean-compile \
1.21041 ++ distclean-tags distclean-generic clean-am
1.21042 ++
1.21043 ++distclean: distclean-am
1.21044 ++ -rm -f config.status
1.21045 ++
1.21046 ++maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
1.21047 ++ maintainer-clean-compile maintainer-clean-tags \
1.21048 ++ maintainer-clean-generic distclean-am
1.21049 ++ @echo "This command is intended for maintainers to use;"
1.21050 ++ @echo "it deletes files that may require special tools to rebuild."
1.21051 ++
1.21052 ++maintainer-clean: maintainer-clean-am
1.21053 ++ -rm -f config.status
1.21054 ++
1.21055 ++.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
1.21056 ++clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
1.21057 ++mostlyclean-compile distclean-compile clean-compile \
1.21058 ++maintainer-clean-compile tags mostlyclean-tags distclean-tags \
1.21059 ++clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
1.21060 ++check-am installcheck-am installcheck install-info-am install-info \
1.21061 ++install-exec-am install-exec install-data-am install-data install-am \
1.21062 ++install uninstall-am uninstall all-redirect all-am all installdirs \
1.21063 ++mostlyclean-generic distclean-generic clean-generic \
1.21064 ++maintainer-clean-generic clean mostlyclean distclean maintainer-clean
1.21065 ++
1.21066 ++
1.21067 ++all: crt0.o
1.21068 ++
1.21069 ++# Tell versions [3.59,3.63) of GNU make to not export all variables.
1.21070 ++# Otherwise a system limit (for SysV at least) may be exceeded.
1.21071 ++.NOEXPORT:
1.21072 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S
1.21073 +--- newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S 1970-01-01 01:00:00.000000000 +0100
1.21074 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S 2009-05-22 09:57:50.000000000 +0200
1.21075 +@@ -0,0 +1,20 @@
1.21076 ++ .text
1.21077 ++ .globl setjmp
1.21078 ++setjmp:
1.21079 ++ stm r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr
1.21080 ++ retal 0
1.21081 ++
1.21082 ++ .globl longjmp
1.21083 ++longjmp:
1.21084 ++ ldm r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr
1.21085 ++ /* Put the return value into the integer result register.
1.21086 ++ But if it is zero then return 1 instead. */
1.21087 ++ cp r11, 0
1.21088 ++ reteq 1
1.21089 ++ retal r11
1.21090 ++
1.21091 ++
1.21092 ++
1.21093 ++
1.21094 ++
1.21095 ++
1.21096 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h
1.21097 +--- newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h 1970-01-01 01:00:00.000000000 +0100
1.21098 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h 2009-05-22 09:57:50.000000000 +0200
1.21099 +@@ -0,0 +1,158 @@
1.21100 ++#ifndef __ASM_AVR32_SYSREGS_H
1.21101 ++#define __ASM_AVR32_SYSREGS_H
1.21102 ++
1.21103 ++#define SYSREG_SR 0
1.21104 ++#define SYSREG_EVBA 4
1.21105 ++#define SYSREG_ACBA 8
1.21106 ++#define SYSREG_CPUCR 12
1.21107 ++#define SYSREG_ECR 16
1.21108 ++#define SYSREG_RSR_SUP 20
1.21109 ++#define SYSREG_RSR_INT0 24
1.21110 ++#define SYSREG_RSR_INT1 28
1.21111 ++#define SYSREG_RSR_INT2 32
1.21112 ++#define SYSREG_RSR_INT3 36
1.21113 ++#define SYSREG_RSR_EX 40
1.21114 ++#define SYSREG_RSR_NMI 44
1.21115 ++#define SYSREG_RSR_DBG 48
1.21116 ++#define SYSREG_RAR_SUP 52
1.21117 ++#define SYSREG_RAR_INT0 56
1.21118 ++#define SYSREG_RAR_INT1 60
1.21119 ++#define SYSREG_RAR_INT2 64
1.21120 ++#define SYSREG_RAR_INT3 68
1.21121 ++#define SYSREG_RAR_EX 72
1.21122 ++#define SYSREG_RAR_NMI 76
1.21123 ++#define SYSREG_RAR_DBG 80
1.21124 ++#define SYSREG_JECR 84
1.21125 ++#define SYSREG_JOSP 88
1.21126 ++#define SYSREG_JAVA_LV0 92
1.21127 ++#define SYSREG_JAVA_LV1 96
1.21128 ++#define SYSREG_JAVA_LV2 100
1.21129 ++#define SYSREG_JAVA_LV3 104
1.21130 ++#define SYSREG_JAVA_LV4 108
1.21131 ++#define SYSREG_JAVA_LV5 112
1.21132 ++#define SYSREG_JAVA_LV6 116
1.21133 ++#define SYSREG_JAVA_LV7 120
1.21134 ++#define SYSREG_JTBA 124
1.21135 ++#define SYSREG_JBCR 128
1.21136 ++
1.21137 ++#define SYSREG_CONFIG0 256
1.21138 ++#define SYSREG_CONFIG1 260
1.21139 ++#define SYSREG_COUNT 264
1.21140 ++#define SYSREG_COMPARE 268
1.21141 ++
1.21142 ++#define SYSREG_BEAR 316
1.21143 ++
1.21144 ++/* MMU interface registers */
1.21145 ++#define SYSREG_TLBEHI 272
1.21146 ++#define SYSREG_TLBELO 276
1.21147 ++#define SYSREG_PTBR 280
1.21148 ++#define SYSREG_TLBEAR 284
1.21149 ++#define SYSREG_MMUCR 288
1.21150 ++#define SYSREG_TLBARLO 292
1.21151 ++#define SYSREG_TLBDRLO 296
1.21152 ++#define SYSREG_TLBARHI 300
1.21153 ++#define SYSREG_TLBDRHI 304
1.21154 ++
1.21155 ++/* Performance counter */
1.21156 ++#define SYSREG_PCCR 320
1.21157 ++
1.21158 ++ // Status register bits
1.21159 ++#define SR_C_OFFSET 0
1.21160 ++#define SR_Z_OFFSET 1
1.21161 ++#define SR_N_OFFSET 2
1.21162 ++#define SR_V_OFFSET 3
1.21163 ++#define SR_Q_OFFSET 4
1.21164 ++#define SR_T_OFFSET 14
1.21165 ++#define SR_R_OFFSET 15
1.21166 ++#define SR_GM_OFFSET 16
1.21167 ++#define SR_I0M_OFFSET 17
1.21168 ++#define SR_I1M_OFFSET 18
1.21169 ++#define SR_I2M_OFFSET 19
1.21170 ++#define SR_I3M_OFFSET 20
1.21171 ++#define SR_EM_OFFSET 21
1.21172 ++#define SR_M0_OFFSET 22
1.21173 ++#define SR_M1_OFFSET 23
1.21174 ++#define SR_M2_OFFSET 24
1.21175 ++#define SR_D_OFFSET 26
1.21176 ++#define SR_DM_OFFSET 27
1.21177 ++#define SR_J_OFFSET 28
1.21178 ++
1.21179 ++#define SR_C (1 << 0)
1.21180 ++#define SR_Z (1 << 1)
1.21181 ++#define SR_N (1 << 2)
1.21182 ++#define SR_V (1 << 3)
1.21183 ++#define SR_Q (1 << 4)
1.21184 ++#define SR_T (1 << 14)
1.21185 ++#define SR_R (1 << 15)
1.21186 ++#define SR_GM (1 << 16)
1.21187 ++#define SR_I0M (1 << 17)
1.21188 ++#define SR_I1M (1 << 18)
1.21189 ++#define SR_I2M (1 << 19)
1.21190 ++#define SR_I3M (1 << 20)
1.21191 ++#define SR_EM (1 << 21)
1.21192 ++#define SR_M0 (1 << 22)
1.21193 ++#define SR_M1 (1 << 23)
1.21194 ++#define SR_M2 (1 << 24)
1.21195 ++#define SR_D (1 << 26)
1.21196 ++#define SR_DM (1 << 27)
1.21197 ++#define SR_J (1 << 28)
1.21198 ++
1.21199 ++//PCCR bits
1.21200 ++#define PCCRS (1<<3)
1.21201 ++#define PCCRC (1<<2)
1.21202 ++#define PCCRR (1<<1)
1.21203 ++#define PCCRE (1<<0)
1.21204 ++#define PCCNT_PRESCALE 64
1.21205 ++
1.21206 ++//TLBEHI bits
1.21207 ++#define TLBEHIVPN (1<<10)
1.21208 ++#define TLBEHIV (1<<9)
1.21209 ++#define TLBEHII (1<<0)
1.21210 ++
1.21211 ++//TLBELO = bits
1.21212 ++#define TLBELOPFN (1<<10)
1.21213 ++#define TLBELOC (1<<9)
1.21214 ++#define TLBELOG (1<<8)
1.21215 ++#define TLBELOB (1<<7)
1.21216 ++#define TLBELOAP (1<<5)
1.21217 ++#define TLBELOSZ (1<<2)
1.21218 ++#define TLBELOD (1<<1)
1.21219 ++#define TLBELOW (1<<0)
1.21220 ++
1.21221 ++//MMUCR bits
1.21222 ++#define MMUIRP (1<<26)
1.21223 ++#define MMUILA (1<<20)
1.21224 ++#define MMUDRP (1<<14)
1.21225 ++#define MMUDLA (1<<8)
1.21226 ++#define MMUS (1<<4)
1.21227 ++#define MMUN (1<<3)
1.21228 ++#define MMUI (1<<2)
1.21229 ++#define MMUM (1<<1)
1.21230 ++#define MMUE (1<<0)
1.21231 ++
1.21232 ++// Relative offsets to EVBA
1.21233 ++#define H_UNREC_EX 0x000
1.21234 ++#define H_TLB_MH 0x004
1.21235 ++#define H_BUS_ERR_D 0x008
1.21236 ++#define H_BUS_ERR_I 0x00C
1.21237 ++#define H_NMI 0x010
1.21238 ++#define H_INST_ADDR 0x014
1.21239 ++#define H_ITLB_MISS 0x050
1.21240 ++#define H_ITLB_PROT 0x018
1.21241 ++#define H_DEBUG 0x01C
1.21242 ++#define H_ILL_OPC 0x020
1.21243 ++#define H_UNIMPL_INST 0x024
1.21244 ++#define H_PRIV_VIOL 0x028
1.21245 ++#define H_FLOAT_PT 0x02C
1.21246 ++#define H_COPROC_ABS 0x030
1.21247 ++#define H_SCALL 0x100
1.21248 ++#define H_DATA_ADDR_R 0x034
1.21249 ++#define H_DATA_ADDR_W 0x038
1.21250 ++#define H_DTLB_MISS_R 0x060
1.21251 ++#define H_DTLB_MISS_W 0x070
1.21252 ++#define H_DTLB_PROT_R 0x03C
1.21253 ++#define H_DTLB_PROT_W 0x040
1.21254 ++#define H_DTLB_MOD 0x044
1.21255 ++
1.21256 ++
1.21257 ++#endif /* __ASM_AVR32_SYSREGS_H */
1.21258 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c
1.21259 +--- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c 1970-01-01 01:00:00.000000000 +0100
1.21260 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c 2009-05-22 09:57:50.000000000 +0200
1.21261 +@@ -0,0 +1,234 @@
1.21262 ++#include "syscalls.h"
1.21263 ++#include "sys/sysregs.h"
1.21264 ++#include <sys/times.h>
1.21265 ++#include <sys/time.h>
1.21266 ++#include <stdio.h>
1.21267 ++#include <errno.h>
1.21268 ++
1.21269 ++int __attribute__((weak))
1.21270 ++ _init_startup ()
1.21271 ++{
1.21272 ++ return 0;
1.21273 ++}
1.21274 ++
1.21275 ++
1.21276 ++clock_t __attribute__((weak))
1.21277 ++ _times( struct tms *tms )
1.21278 ++{
1.21279 ++ int tick;
1.21280 ++ tick = __builtin_mfsr(SYSREG_COUNT);
1.21281 ++ tms->tms_utime = 0;
1.21282 ++ tms->tms_stime = tick;
1.21283 ++ tms->tms_cutime = 0;
1.21284 ++ tms->tms_cstime = 0;
1.21285 ++ return tick;
1.21286 ++}
1.21287 ++
1.21288 ++extern void __heap_start__, __heap_end__;
1.21289 ++
1.21290 ++void * __attribute__((weak))
1.21291 ++ _sbrk(int increment)
1.21292 ++{
1.21293 ++ static void *cur_heap_pos = 0;
1.21294 ++
1.21295 ++ //Initialize cur_heap_pos
1.21296 ++ if ( cur_heap_pos == 0 )
1.21297 ++ cur_heap_pos = &__heap_start__;
1.21298 ++
1.21299 ++ if ( (cur_heap_pos + increment) <= &__heap_end__ ){
1.21300 ++ void *heap_pos = cur_heap_pos;
1.21301 ++ cur_heap_pos += increment;
1.21302 ++ return heap_pos;
1.21303 ++ } else {
1.21304 ++#ifdef DEBUG_MSG_ON
1.21305 ++ fprintf(stderr, "Warning: Heap is running full trying to allocate %i bytes!!!!\n", increment);
1.21306 ++ fprintf(stderr, "\tHeap start address\t= 0x%x\n", &__heap_start__);
1.21307 ++ fprintf(stderr, "\tHeap end address\t= 0x%x\n", &__heap_end__);
1.21308 ++ fprintf(stderr, "\tCurrent heap address\t= 0x%x\n", cur_heap_pos);
1.21309 ++ fflush(stderr);
1.21310 ++#endif
1.21311 ++ errno = ENOMEM;
1.21312 ++ return (void *)-1;
1.21313 ++ }
1.21314 ++ return (void *)-1;
1.21315 ++}
1.21316 ++
1.21317 ++void __attribute__((weak,naked))
1.21318 ++ _init_argv (void *arg_mem_top)
1.21319 ++{
1.21320 ++ T2H_SYSCALL(T2H_SYSCALL_INIT_ARGV);
1.21321 ++ T2H_SYSCALL_RETURN();
1.21322 ++}
1.21323 ++
1.21324 ++void __attribute__((weak,naked))
1.21325 ++ _exit( int code )
1.21326 ++{
1.21327 ++ T2H_SYSCALL(T2H_SYSCALL_EXIT);
1.21328 ++ while (1);
1.21329 ++}
1.21330 ++
1.21331 ++int __attribute__((weak,naked))
1.21332 ++ _open (char *pathname, int flags, int mode)
1.21333 ++{
1.21334 ++ T2H_SYSCALL(T2H_SYSCALL_OPEN);
1.21335 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21336 ++}
1.21337 ++
1.21338 ++int __attribute__((weak,naked))
1.21339 ++ _close (int file)
1.21340 ++{
1.21341 ++ T2H_SYSCALL(T2H_SYSCALL_CLOSE);
1.21342 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21343 ++}
1.21344 ++
1.21345 ++int __attribute__((weak,naked))
1.21346 ++ _lseek( int filedes, int offset, int whence )
1.21347 ++{
1.21348 ++ T2H_SYSCALL(T2H_SYSCALL_LSEEK);
1.21349 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21350 ++}
1.21351 ++
1.21352 ++
1.21353 ++int __attribute__((weak,naked))
1.21354 ++ _read (int file,
1.21355 ++ char * ptr,
1.21356 ++ int len){
1.21357 ++ T2H_SYSCALL(T2H_SYSCALL_READ);
1.21358 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21359 ++}
1.21360 ++
1.21361 ++int __attribute__((weak,naked))
1.21362 ++ _write (int file,
1.21363 ++ char * ptr,
1.21364 ++ int len){
1.21365 ++ T2H_SYSCALL(T2H_SYSCALL_WRITE);
1.21366 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21367 ++}
1.21368 ++
1.21369 ++int __attribute__((weak,naked))
1.21370 ++ isatty (int desc){
1.21371 ++ T2H_SYSCALL(T2H_SYSCALL_ISATTY);
1.21372 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21373 ++}
1.21374 ++
1.21375 ++static void _convert_host2target_stat(struct stat *target_stat, struct host_stat *host_stat)
1.21376 ++{
1.21377 ++ target_stat->st_dev = (dev_t)host_stat->st_dev;
1.21378 ++ target_stat->st_ino = (ino_t)host_stat->st_ino;
1.21379 ++ target_stat->st_mode = (mode_t)host_stat->st_mode;
1.21380 ++ target_stat->st_nlink = (nlink_t)host_stat->st_nlink;
1.21381 ++ target_stat->st_uid = (uid_t)host_stat->st_uid;
1.21382 ++ target_stat->st_gid = (gid_t)host_stat->st_gid;
1.21383 ++ target_stat->st_rdev = (dev_t)host_stat->st_rdev;
1.21384 ++ target_stat->st_size = (off_t)host_stat->st_size;
1.21385 ++ target_stat->st_blksize = (long)host_stat->st_blksize;
1.21386 ++ target_stat->st_blocks = (long)host_stat->st_blocks;
1.21387 ++ target_stat->st_atime = (time_t)host_stat->st_atime;
1.21388 ++ target_stat->st_mtime = (time_t)host_stat->st_mtime;
1.21389 ++ target_stat->st_ctime = (time_t)host_stat->st_ctime;
1.21390 ++}
1.21391 ++
1.21392 ++int __attribute__((naked))
1.21393 ++ _fstat_host (int filedes, struct host_stat *ptr){
1.21394 ++ T2H_SYSCALL(T2H_SYSCALL_FSTAT);
1.21395 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21396 ++}
1.21397 ++
1.21398 ++int __attribute__((naked))
1.21399 ++ _stat_host (const char *filename, struct host_stat *ptr){
1.21400 ++ T2H_SYSCALL(T2H_SYSCALL_STAT);
1.21401 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21402 ++}
1.21403 ++
1.21404 ++int __attribute__((weak))
1.21405 ++ _fstat (int filedes, struct stat *stat){
1.21406 ++ struct host_stat host_stat;
1.21407 ++ if ( _fstat_host (filedes, &host_stat) < 0 )
1.21408 ++ return -1;
1.21409 ++ _convert_host2target_stat (stat, &host_stat);
1.21410 ++ return 0;
1.21411 ++}
1.21412 ++
1.21413 ++int __attribute__((weak))
1.21414 ++ _stat (const char *filename, struct stat *stat){
1.21415 ++ struct host_stat host_stat;
1.21416 ++ if ( _stat_host (filename, &host_stat) < 0)
1.21417 ++ return -1;
1.21418 ++ _convert_host2target_stat (stat, &host_stat);
1.21419 ++ return 0;
1.21420 ++}
1.21421 ++
1.21422 ++
1.21423 ++int __attribute__((naked))
1.21424 ++ _gettimeofday_host (struct host_timeval *tv, struct timezone *tz){
1.21425 ++ T2H_SYSCALL(T2H_SYSCALL_GETTIMEOFDAY);
1.21426 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21427 ++}
1.21428 ++
1.21429 ++int __attribute__((weak))
1.21430 ++ _gettimeofday (struct timeval *tv, struct timezone *tz){
1.21431 ++ struct host_timeval host_tv;
1.21432 ++ if ( _gettimeofday_host (&host_tv, tz) < 0 )
1.21433 ++ return -1;
1.21434 ++ tv->tv_sec = (long)host_tv.tv_sec;
1.21435 ++ tv->tv_usec = (long)host_tv.tv_usec;
1.21436 ++ return 0;
1.21437 ++}
1.21438 ++
1.21439 ++int __attribute__((weak,naked))
1.21440 ++ _unlink (const char *path){
1.21441 ++ T2H_SYSCALL(T2H_SYSCALL_UNLINK);
1.21442 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21443 ++}
1.21444 ++
1.21445 ++int __attribute__((weak,naked))
1.21446 ++ _system (const char *command){
1.21447 ++ T2H_SYSCALL(T2H_SYSCALL_SYSTEM);
1.21448 ++ T2H_SYSCALL_CHECK_ERROR_AND_RETURN();
1.21449 ++}
1.21450 ++
1.21451 ++int __attribute__((weak))
1.21452 ++ _execve (){
1.21453 ++ return -1;
1.21454 ++}
1.21455 ++
1.21456 ++
1.21457 ++int __attribute__((weak))
1.21458 ++ _fork (){
1.21459 ++ return -1;
1.21460 ++}
1.21461 ++
1.21462 ++int __attribute__((weak))
1.21463 ++ _wait (){
1.21464 ++ return -1;
1.21465 ++}
1.21466 ++
1.21467 ++int __attribute__((weak))
1.21468 ++ sigfillset (){
1.21469 ++ return -1;
1.21470 ++}
1.21471 ++
1.21472 ++int __attribute__((weak))
1.21473 ++ sigprocmask (){
1.21474 ++ return -1;
1.21475 ++}
1.21476 ++
1.21477 ++int __attribute__((weak))
1.21478 ++ _fcntl (){
1.21479 ++ return -1;
1.21480 ++}
1.21481 ++
1.21482 ++int __attribute__((weak))
1.21483 ++ _link (){
1.21484 ++ return -1;
1.21485 ++}
1.21486 ++
1.21487 ++int __attribute__((weak))
1.21488 ++ _kill (){
1.21489 ++ return -1;
1.21490 ++}
1.21491 ++
1.21492 ++int __attribute__((weak))
1.21493 ++ _getpid (){
1.21494 ++ return -1;
1.21495 ++}
1.21496 +diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h
1.21497 +--- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h 1970-01-01 01:00:00.000000000 +0100
1.21498 ++++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h 2009-05-22 09:57:50.000000000 +0200
1.21499 +@@ -0,0 +1,72 @@
1.21500 ++#ifndef __SYSCALLS_H__
1.21501 ++#define __SYSCALLS_H__
1.21502 ++
1.21503 ++#include <sys/stat.h>
1.21504 ++#include <errno.h>
1.21505 ++
1.21506 ++struct host_stat {
1.21507 ++ unsigned int st_dev; /* device */
1.21508 ++ unsigned int st_ino; /* inode */
1.21509 ++ mode_t st_mode; /* protection */
1.21510 ++ unsigned int st_nlink; /* number of hard links */
1.21511 ++ unsigned int st_uid; /* user ID of owner */
1.21512 ++ unsigned int st_gid; /* group ID of owner */
1.21513 ++ unsigned int st_rdev; /* device type (if inode device) */
1.21514 ++ unsigned long long st_size; /* total size, in bytes */
1.21515 ++ unsigned long long st_blksize; /* blocksize for filesystem I/O */
1.21516 ++ unsigned long long st_blocks; /* number of blocks allocated */
1.21517 ++ time_t st_atime; /* time of last access */
1.21518 ++ time_t st_mtime; /* time of last modification */
1.21519 ++ time_t st_ctime; /* time of last change */
1.21520 ++};
1.21521 ++
1.21522 ++struct host_timeval {
1.21523 ++ time_t tv_sec;
1.21524 ++ long long tv_usec;
1.21525 ++};
1.21526 ++
1.21527 ++
1.21528 ++#define T2H_SYSCALL_OPEN 1
1.21529 ++#define T2H_SYSCALL_CLOSE 2
1.21530 ++#define T2H_SYSCALL_READ 3
1.21531 ++#define T2H_SYSCALL_WRITE 4
1.21532 ++#define T2H_SYSCALL_LSEEK 5
1.21533 ++#define T2H_SYSCALL_RENAME 6
1.21534 ++#define T2H_SYSCALL_UNLINK 7
1.21535 ++#define T2H_SYSCALL_STAT 8
1.21536 ++#define T2H_SYSCALL_FSTAT 9
1.21537 ++#define T2H_SYSCALL_GETTIMEOFDAY 10
1.21538 ++#define T2H_SYSCALL_ISATTY 11
1.21539 ++#define T2H_SYSCALL_SYSTEM 12
1.21540 ++#define T2H_SYSCALL_EXIT 13
1.21541 ++#define T2H_SYSCALL_INIT_ARGV 14
1.21542 ++
1.21543 ++
1.21544 ++/* The breakpoint/mov r12,-1/mov r11,... pattern causes
1.21545 ++ the debugger to be able to recognize the system call.
1.21546 ++ If the debug system is not enabled then the breakpoint
1.21547 ++ is executed as a nop and r12 set to -1 and errno to
1.21548 ++ ENOSYS. The debugger is responsible for setting r12
1.21549 ++ and r11 and skipping the instructions after the breakpoint
1.21550 ++ which would otherwise set these registers.
1.21551 ++*/
1.21552 ++#define T2H_SYSCALL(syscall_code) \
1.21553 ++ asm ("mov r8, %0\n" \
1.21554 ++ "breakpoint\n" \
1.21555 ++ "mov r12, -1\n" \
1.21556 ++ "mov r11, %1\n" \
1.21557 ++ :: "i" (syscall_code), "i" (ENOSYS) );
1.21558 ++
1.21559 ++#define T2H_SYSCALL_CHECK_ERROR_AND_RETURN() \
1.21560 ++ asm ("cp.w r12, 0\n" \
1.21561 ++ "retge r12\n" \
1.21562 ++ "lda.w r10, errno\n" \
1.21563 ++ "st.w r10[0], r11\n" \
1.21564 ++ "ret r12\n" \
1.21565 ++ ".align 2\n" \
1.21566 ++ ".cpool\n");
1.21567 ++
1.21568 ++#define T2H_SYSCALL_RETURN() \
1.21569 ++ asm ("ret r12\n");
1.21570 ++
1.21571 ++#endif
1.21572 +diff -Naur newlib-1.17.0/newlib/libc/sys/configure newlib-1.17.0-new/newlib/libc/sys/configure
1.21573 +--- newlib-1.17.0/newlib/libc/sys/configure 2008-12-22 20:45:49.000000000 +0100
1.21574 ++++ newlib-1.17.0-new/newlib/libc/sys/configure 2009-05-22 09:57:50.000000000 +0200
1.21575 +@@ -1,25 +1,54 @@
1.21576 + #! /bin/sh
1.21577 + # Guess values for system-dependent variables and create Makefiles.
1.21578 +-# Generated by GNU Autoconf 2.59 for newlib 1.17.0.
1.21579 ++# Generated by GNU Autoconf 2.61 for newlib 1.17.0.
1.21580 + #
1.21581 +-# Copyright (C) 2003 Free Software Foundation, Inc.
1.21582 ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
1.21583 ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.21584 + # This configure script is free software; the Free Software Foundation
1.21585 + # gives unlimited permission to copy, distribute and modify it.
1.21586 + ## --------------------- ##
1.21587 + ## M4sh Initialization. ##
1.21588 + ## --------------------- ##
1.21589 +
1.21590 +-# Be Bourne compatible
1.21591 ++# Be more Bourne compatible
1.21592 ++DUALCASE=1; export DUALCASE # for MKS sh
1.21593 + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.21594 + emulate sh
1.21595 + NULLCMD=:
1.21596 + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.21597 + # is contrary to our usage. Disable this feature.
1.21598 + alias -g '${1+"$@"}'='"$@"'
1.21599 +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1.21600 +- set -o posix
1.21601 ++ setopt NO_GLOB_SUBST
1.21602 ++else
1.21603 ++ case `(set -o) 2>/dev/null` in
1.21604 ++ *posix*) set -o posix ;;
1.21605 ++esac
1.21606 ++
1.21607 ++fi
1.21608 ++
1.21609 ++
1.21610 ++
1.21611 ++
1.21612 ++# PATH needs CR
1.21613 ++# Avoid depending upon Character Ranges.
1.21614 ++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.21615 ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.21616 ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.21617 ++as_cr_digits='0123456789'
1.21618 ++as_cr_alnum=$as_cr_Letters$as_cr_digits
1.21619 ++
1.21620 ++# The user is always right.
1.21621 ++if test "${PATH_SEPARATOR+set}" != set; then
1.21622 ++ echo "#! /bin/sh" >conf$$.sh
1.21623 ++ echo "exit 0" >>conf$$.sh
1.21624 ++ chmod +x conf$$.sh
1.21625 ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.21626 ++ PATH_SEPARATOR=';'
1.21627 ++ else
1.21628 ++ PATH_SEPARATOR=:
1.21629 ++ fi
1.21630 ++ rm -f conf$$.sh
1.21631 + fi
1.21632 +-DUALCASE=1; export DUALCASE # for MKS sh
1.21633 +
1.21634 + # Support unset when possible.
1.21635 + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.21636 +@@ -29,8 +58,43 @@
1.21637 + fi
1.21638 +
1.21639 +
1.21640 ++# IFS
1.21641 ++# We need space, tab and new line, in precisely that order. Quoting is
1.21642 ++# there to prevent editors from complaining about space-tab.
1.21643 ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
1.21644 ++# splitting by setting IFS to empty value.)
1.21645 ++as_nl='
1.21646 ++'
1.21647 ++IFS=" "" $as_nl"
1.21648 ++
1.21649 ++# Find who we are. Look in the path if we contain no directory separator.
1.21650 ++case $0 in
1.21651 ++ *[\\/]* ) as_myself=$0 ;;
1.21652 ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.21653 ++for as_dir in $PATH
1.21654 ++do
1.21655 ++ IFS=$as_save_IFS
1.21656 ++ test -z "$as_dir" && as_dir=.
1.21657 ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.21658 ++done
1.21659 ++IFS=$as_save_IFS
1.21660 ++
1.21661 ++ ;;
1.21662 ++esac
1.21663 ++# We did not find ourselves, most probably we were run as `sh COMMAND'
1.21664 ++# in which case we are not to be found in the path.
1.21665 ++if test "x$as_myself" = x; then
1.21666 ++ as_myself=$0
1.21667 ++fi
1.21668 ++if test ! -f "$as_myself"; then
1.21669 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
1.21670 ++ { (exit 1); exit 1; }
1.21671 ++fi
1.21672 ++
1.21673 + # Work around bugs in pre-3.0 UWIN ksh.
1.21674 +-$as_unset ENV MAIL MAILPATH
1.21675 ++for as_var in ENV MAIL MAILPATH
1.21676 ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.21677 ++done
1.21678 + PS1='$ '
1.21679 + PS2='> '
1.21680 + PS4='+ '
1.21681 +@@ -44,18 +108,19 @@
1.21682 + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1.21683 + eval $as_var=C; export $as_var
1.21684 + else
1.21685 +- $as_unset $as_var
1.21686 ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.21687 + fi
1.21688 + done
1.21689 +
1.21690 + # Required to use basename.
1.21691 +-if expr a : '\(a\)' >/dev/null 2>&1; then
1.21692 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.21693 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.21694 + as_expr=expr
1.21695 + else
1.21696 + as_expr=false
1.21697 + fi
1.21698 +
1.21699 +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
1.21700 ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
1.21701 + as_basename=basename
1.21702 + else
1.21703 + as_basename=false
1.21704 +@@ -63,157 +128,388 @@
1.21705 +
1.21706 +
1.21707 + # Name of the executable.
1.21708 +-as_me=`$as_basename "$0" ||
1.21709 ++as_me=`$as_basename -- "$0" ||
1.21710 + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1.21711 + X"$0" : 'X\(//\)$' \| \
1.21712 +- X"$0" : 'X\(/\)$' \| \
1.21713 +- . : '\(.\)' 2>/dev/null ||
1.21714 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.21715 + echo X/"$0" |
1.21716 +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
1.21717 +- /^X\/\(\/\/\)$/{ s//\1/; q; }
1.21718 +- /^X\/\(\/\).*/{ s//\1/; q; }
1.21719 +- s/.*/./; q'`
1.21720 ++ sed '/^.*\/\([^/][^/]*\)\/*$/{
1.21721 ++ s//\1/
1.21722 ++ q
1.21723 ++ }
1.21724 ++ /^X\/\(\/\/\)$/{
1.21725 ++ s//\1/
1.21726 ++ q
1.21727 ++ }
1.21728 ++ /^X\/\(\/\).*/{
1.21729 ++ s//\1/
1.21730 ++ q
1.21731 ++ }
1.21732 ++ s/.*/./; q'`
1.21733 +
1.21734 ++# CDPATH.
1.21735 ++$as_unset CDPATH
1.21736 +
1.21737 +-# PATH needs CR, and LINENO needs CR and PATH.
1.21738 +-# Avoid depending upon Character Ranges.
1.21739 +-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.21740 +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.21741 +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.21742 +-as_cr_digits='0123456789'
1.21743 +-as_cr_alnum=$as_cr_Letters$as_cr_digits
1.21744 +
1.21745 +-# The user is always right.
1.21746 +-if test "${PATH_SEPARATOR+set}" != set; then
1.21747 +- echo "#! /bin/sh" >conf$$.sh
1.21748 +- echo "exit 0" >>conf$$.sh
1.21749 +- chmod +x conf$$.sh
1.21750 +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.21751 +- PATH_SEPARATOR=';'
1.21752 +- else
1.21753 +- PATH_SEPARATOR=:
1.21754 +- fi
1.21755 +- rm -f conf$$.sh
1.21756 ++if test "x$CONFIG_SHELL" = x; then
1.21757 ++ if (eval ":") 2>/dev/null; then
1.21758 ++ as_have_required=yes
1.21759 ++else
1.21760 ++ as_have_required=no
1.21761 + fi
1.21762 +
1.21763 ++ if test $as_have_required = yes && (eval ":
1.21764 ++(as_func_return () {
1.21765 ++ (exit \$1)
1.21766 ++}
1.21767 ++as_func_success () {
1.21768 ++ as_func_return 0
1.21769 ++}
1.21770 ++as_func_failure () {
1.21771 ++ as_func_return 1
1.21772 ++}
1.21773 ++as_func_ret_success () {
1.21774 ++ return 0
1.21775 ++}
1.21776 ++as_func_ret_failure () {
1.21777 ++ return 1
1.21778 ++}
1.21779 +
1.21780 +- as_lineno_1=$LINENO
1.21781 +- as_lineno_2=$LINENO
1.21782 +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1.21783 +- test "x$as_lineno_1" != "x$as_lineno_2" &&
1.21784 +- test "x$as_lineno_3" = "x$as_lineno_2" || {
1.21785 +- # Find who we are. Look in the path if we contain no path at all
1.21786 +- # relative or not.
1.21787 +- case $0 in
1.21788 +- *[\\/]* ) as_myself=$0 ;;
1.21789 +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.21790 +-for as_dir in $PATH
1.21791 +-do
1.21792 +- IFS=$as_save_IFS
1.21793 +- test -z "$as_dir" && as_dir=.
1.21794 +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.21795 +-done
1.21796 ++exitcode=0
1.21797 ++if as_func_success; then
1.21798 ++ :
1.21799 ++else
1.21800 ++ exitcode=1
1.21801 ++ echo as_func_success failed.
1.21802 ++fi
1.21803 +
1.21804 +- ;;
1.21805 +- esac
1.21806 +- # We did not find ourselves, most probably we were run as `sh COMMAND'
1.21807 +- # in which case we are not to be found in the path.
1.21808 +- if test "x$as_myself" = x; then
1.21809 +- as_myself=$0
1.21810 +- fi
1.21811 +- if test ! -f "$as_myself"; then
1.21812 +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
1.21813 +- { (exit 1); exit 1; }; }
1.21814 +- fi
1.21815 +- case $CONFIG_SHELL in
1.21816 +- '')
1.21817 ++if as_func_failure; then
1.21818 ++ exitcode=1
1.21819 ++ echo as_func_failure succeeded.
1.21820 ++fi
1.21821 ++
1.21822 ++if as_func_ret_success; then
1.21823 ++ :
1.21824 ++else
1.21825 ++ exitcode=1
1.21826 ++ echo as_func_ret_success failed.
1.21827 ++fi
1.21828 ++
1.21829 ++if as_func_ret_failure; then
1.21830 ++ exitcode=1
1.21831 ++ echo as_func_ret_failure succeeded.
1.21832 ++fi
1.21833 ++
1.21834 ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
1.21835 ++ :
1.21836 ++else
1.21837 ++ exitcode=1
1.21838 ++ echo positional parameters were not saved.
1.21839 ++fi
1.21840 ++
1.21841 ++test \$exitcode = 0) || { (exit 1); exit 1; }
1.21842 ++
1.21843 ++(
1.21844 ++ as_lineno_1=\$LINENO
1.21845 ++ as_lineno_2=\$LINENO
1.21846 ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
1.21847 ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
1.21848 ++") 2> /dev/null; then
1.21849 ++ :
1.21850 ++else
1.21851 ++ as_candidate_shells=
1.21852 + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.21853 + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1.21854 + do
1.21855 + IFS=$as_save_IFS
1.21856 + test -z "$as_dir" && as_dir=.
1.21857 +- for as_base in sh bash ksh sh5; do
1.21858 +- case $as_dir in
1.21859 ++ case $as_dir in
1.21860 + /*)
1.21861 +- if ("$as_dir/$as_base" -c '
1.21862 ++ for as_base in sh bash ksh sh5; do
1.21863 ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
1.21864 ++ done;;
1.21865 ++ esac
1.21866 ++done
1.21867 ++IFS=$as_save_IFS
1.21868 ++
1.21869 ++
1.21870 ++ for as_shell in $as_candidate_shells $SHELL; do
1.21871 ++ # Try only shells that exist, to save several forks.
1.21872 ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
1.21873 ++ { ("$as_shell") 2> /dev/null <<\_ASEOF
1.21874 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.21875 ++ emulate sh
1.21876 ++ NULLCMD=:
1.21877 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.21878 ++ # is contrary to our usage. Disable this feature.
1.21879 ++ alias -g '${1+"$@"}'='"$@"'
1.21880 ++ setopt NO_GLOB_SUBST
1.21881 ++else
1.21882 ++ case `(set -o) 2>/dev/null` in
1.21883 ++ *posix*) set -o posix ;;
1.21884 ++esac
1.21885 ++
1.21886 ++fi
1.21887 ++
1.21888 ++
1.21889 ++:
1.21890 ++_ASEOF
1.21891 ++}; then
1.21892 ++ CONFIG_SHELL=$as_shell
1.21893 ++ as_have_required=yes
1.21894 ++ if { "$as_shell" 2> /dev/null <<\_ASEOF
1.21895 ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.21896 ++ emulate sh
1.21897 ++ NULLCMD=:
1.21898 ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.21899 ++ # is contrary to our usage. Disable this feature.
1.21900 ++ alias -g '${1+"$@"}'='"$@"'
1.21901 ++ setopt NO_GLOB_SUBST
1.21902 ++else
1.21903 ++ case `(set -o) 2>/dev/null` in
1.21904 ++ *posix*) set -o posix ;;
1.21905 ++esac
1.21906 ++
1.21907 ++fi
1.21908 ++
1.21909 ++
1.21910 ++:
1.21911 ++(as_func_return () {
1.21912 ++ (exit $1)
1.21913 ++}
1.21914 ++as_func_success () {
1.21915 ++ as_func_return 0
1.21916 ++}
1.21917 ++as_func_failure () {
1.21918 ++ as_func_return 1
1.21919 ++}
1.21920 ++as_func_ret_success () {
1.21921 ++ return 0
1.21922 ++}
1.21923 ++as_func_ret_failure () {
1.21924 ++ return 1
1.21925 ++}
1.21926 ++
1.21927 ++exitcode=0
1.21928 ++if as_func_success; then
1.21929 ++ :
1.21930 ++else
1.21931 ++ exitcode=1
1.21932 ++ echo as_func_success failed.
1.21933 ++fi
1.21934 ++
1.21935 ++if as_func_failure; then
1.21936 ++ exitcode=1
1.21937 ++ echo as_func_failure succeeded.
1.21938 ++fi
1.21939 ++
1.21940 ++if as_func_ret_success; then
1.21941 ++ :
1.21942 ++else
1.21943 ++ exitcode=1
1.21944 ++ echo as_func_ret_success failed.
1.21945 ++fi
1.21946 ++
1.21947 ++if as_func_ret_failure; then
1.21948 ++ exitcode=1
1.21949 ++ echo as_func_ret_failure succeeded.
1.21950 ++fi
1.21951 ++
1.21952 ++if ( set x; as_func_ret_success y && test x = "$1" ); then
1.21953 ++ :
1.21954 ++else
1.21955 ++ exitcode=1
1.21956 ++ echo positional parameters were not saved.
1.21957 ++fi
1.21958 ++
1.21959 ++test $exitcode = 0) || { (exit 1); exit 1; }
1.21960 ++
1.21961 ++(
1.21962 + as_lineno_1=$LINENO
1.21963 + as_lineno_2=$LINENO
1.21964 +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1.21965 + test "x$as_lineno_1" != "x$as_lineno_2" &&
1.21966 +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
1.21967 +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
1.21968 +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
1.21969 +- CONFIG_SHELL=$as_dir/$as_base
1.21970 +- export CONFIG_SHELL
1.21971 +- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
1.21972 +- fi;;
1.21973 +- esac
1.21974 +- done
1.21975 +-done
1.21976 +-;;
1.21977 +- esac
1.21978 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
1.21979 ++
1.21980 ++_ASEOF
1.21981 ++}; then
1.21982 ++ break
1.21983 ++fi
1.21984 ++
1.21985 ++fi
1.21986 ++
1.21987 ++ done
1.21988 ++
1.21989 ++ if test "x$CONFIG_SHELL" != x; then
1.21990 ++ for as_var in BASH_ENV ENV
1.21991 ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.21992 ++ done
1.21993 ++ export CONFIG_SHELL
1.21994 ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
1.21995 ++fi
1.21996 ++
1.21997 ++
1.21998 ++ if test $as_have_required = no; then
1.21999 ++ echo This script requires a shell more modern than all the
1.22000 ++ echo shells that I found on your system. Please install a
1.22001 ++ echo modern shell, or manually run the script under such a
1.22002 ++ echo shell if you do have one.
1.22003 ++ { (exit 1); exit 1; }
1.22004 ++fi
1.22005 ++
1.22006 ++
1.22007 ++fi
1.22008 ++
1.22009 ++fi
1.22010 ++
1.22011 ++
1.22012 ++
1.22013 ++(eval "as_func_return () {
1.22014 ++ (exit \$1)
1.22015 ++}
1.22016 ++as_func_success () {
1.22017 ++ as_func_return 0
1.22018 ++}
1.22019 ++as_func_failure () {
1.22020 ++ as_func_return 1
1.22021 ++}
1.22022 ++as_func_ret_success () {
1.22023 ++ return 0
1.22024 ++}
1.22025 ++as_func_ret_failure () {
1.22026 ++ return 1
1.22027 ++}
1.22028 ++
1.22029 ++exitcode=0
1.22030 ++if as_func_success; then
1.22031 ++ :
1.22032 ++else
1.22033 ++ exitcode=1
1.22034 ++ echo as_func_success failed.
1.22035 ++fi
1.22036 ++
1.22037 ++if as_func_failure; then
1.22038 ++ exitcode=1
1.22039 ++ echo as_func_failure succeeded.
1.22040 ++fi
1.22041 ++
1.22042 ++if as_func_ret_success; then
1.22043 ++ :
1.22044 ++else
1.22045 ++ exitcode=1
1.22046 ++ echo as_func_ret_success failed.
1.22047 ++fi
1.22048 ++
1.22049 ++if as_func_ret_failure; then
1.22050 ++ exitcode=1
1.22051 ++ echo as_func_ret_failure succeeded.
1.22052 ++fi
1.22053 ++
1.22054 ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
1.22055 ++ :
1.22056 ++else
1.22057 ++ exitcode=1
1.22058 ++ echo positional parameters were not saved.
1.22059 ++fi
1.22060 ++
1.22061 ++test \$exitcode = 0") || {
1.22062 ++ echo No shell found that supports shell functions.
1.22063 ++ echo Please tell autoconf@gnu.org about your system,
1.22064 ++ echo including any error possibly output before this
1.22065 ++ echo message
1.22066 ++}
1.22067 ++
1.22068 ++
1.22069 ++
1.22070 ++ as_lineno_1=$LINENO
1.22071 ++ as_lineno_2=$LINENO
1.22072 ++ test "x$as_lineno_1" != "x$as_lineno_2" &&
1.22073 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
1.22074 +
1.22075 + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1.22076 + # uniformly replaced by the line number. The first 'sed' inserts a
1.22077 +- # line-number line before each line; the second 'sed' does the real
1.22078 +- # work. The second script uses 'N' to pair each line-number line
1.22079 +- # with the numbered line, and appends trailing '-' during
1.22080 +- # substitution so that $LINENO is not a special case at line end.
1.22081 ++ # line-number line after each line using $LINENO; the second 'sed'
1.22082 ++ # does the real work. The second script uses 'N' to pair each
1.22083 ++ # line-number line with the line containing $LINENO, and appends
1.22084 ++ # trailing '-' during substitution so that $LINENO is not a special
1.22085 ++ # case at line end.
1.22086 + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1.22087 +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
1.22088 +- sed '=' <$as_myself |
1.22089 ++ # scripts with optimization help from Paolo Bonzini. Blame Lee
1.22090 ++ # E. McMahon (1931-1989) for sed's syntax. :-)
1.22091 ++ sed -n '
1.22092 ++ p
1.22093 ++ /[$]LINENO/=
1.22094 ++ ' <$as_myself |
1.22095 + sed '
1.22096 ++ s/[$]LINENO.*/&-/
1.22097 ++ t lineno
1.22098 ++ b
1.22099 ++ :lineno
1.22100 + N
1.22101 +- s,$,-,
1.22102 +- : loop
1.22103 +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
1.22104 ++ :loop
1.22105 ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
1.22106 + t loop
1.22107 +- s,-$,,
1.22108 +- s,^['$as_cr_digits']*\n,,
1.22109 ++ s/-\n.*//
1.22110 + ' >$as_me.lineno &&
1.22111 +- chmod +x $as_me.lineno ||
1.22112 ++ chmod +x "$as_me.lineno" ||
1.22113 + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
1.22114 + { (exit 1); exit 1; }; }
1.22115 +
1.22116 + # Don't try to exec as it changes $[0], causing all sort of problems
1.22117 + # (the dirname of $[0] is not the place where we might find the
1.22118 +- # original and so on. Autoconf is especially sensible to this).
1.22119 +- . ./$as_me.lineno
1.22120 ++ # original and so on. Autoconf is especially sensitive to this).
1.22121 ++ . "./$as_me.lineno"
1.22122 + # Exit status is that of the last command.
1.22123 + exit
1.22124 + }
1.22125 +
1.22126 +
1.22127 +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1.22128 +- *c*,-n*) ECHO_N= ECHO_C='
1.22129 +-' ECHO_T=' ' ;;
1.22130 +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
1.22131 +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
1.22132 ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
1.22133 ++ as_dirname=dirname
1.22134 ++else
1.22135 ++ as_dirname=false
1.22136 ++fi
1.22137 ++
1.22138 ++ECHO_C= ECHO_N= ECHO_T=
1.22139 ++case `echo -n x` in
1.22140 ++-n*)
1.22141 ++ case `echo 'x\c'` in
1.22142 ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
1.22143 ++ *) ECHO_C='\c';;
1.22144 ++ esac;;
1.22145 ++*)
1.22146 ++ ECHO_N='-n';;
1.22147 + esac
1.22148 +
1.22149 +-if expr a : '\(a\)' >/dev/null 2>&1; then
1.22150 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.22151 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.22152 + as_expr=expr
1.22153 + else
1.22154 + as_expr=false
1.22155 + fi
1.22156 +
1.22157 + rm -f conf$$ conf$$.exe conf$$.file
1.22158 ++if test -d conf$$.dir; then
1.22159 ++ rm -f conf$$.dir/conf$$.file
1.22160 ++else
1.22161 ++ rm -f conf$$.dir
1.22162 ++ mkdir conf$$.dir
1.22163 ++fi
1.22164 + echo >conf$$.file
1.22165 + if ln -s conf$$.file conf$$ 2>/dev/null; then
1.22166 +- # We could just check for DJGPP; but this test a) works b) is more generic
1.22167 +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1.22168 +- if test -f conf$$.exe; then
1.22169 +- # Don't use ln at all; we don't have any links
1.22170 ++ as_ln_s='ln -s'
1.22171 ++ # ... but there are two gotchas:
1.22172 ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
1.22173 ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
1.22174 ++ # In both cases, we have to default to `cp -p'.
1.22175 ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
1.22176 + as_ln_s='cp -p'
1.22177 +- else
1.22178 +- as_ln_s='ln -s'
1.22179 +- fi
1.22180 + elif ln conf$$.file conf$$ 2>/dev/null; then
1.22181 + as_ln_s=ln
1.22182 + else
1.22183 + as_ln_s='cp -p'
1.22184 + fi
1.22185 +-rm -f conf$$ conf$$.exe conf$$.file
1.22186 ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
1.22187 ++rmdir conf$$.dir 2>/dev/null
1.22188 +
1.22189 + if mkdir -p . 2>/dev/null; then
1.22190 + as_mkdir_p=:
1.22191 +@@ -222,7 +518,28 @@
1.22192 + as_mkdir_p=false
1.22193 + fi
1.22194 +
1.22195 +-as_executable_p="test -f"
1.22196 ++if test -x / >/dev/null 2>&1; then
1.22197 ++ as_test_x='test -x'
1.22198 ++else
1.22199 ++ if ls -dL / >/dev/null 2>&1; then
1.22200 ++ as_ls_L_option=L
1.22201 ++ else
1.22202 ++ as_ls_L_option=
1.22203 ++ fi
1.22204 ++ as_test_x='
1.22205 ++ eval sh -c '\''
1.22206 ++ if test -d "$1"; then
1.22207 ++ test -d "$1/.";
1.22208 ++ else
1.22209 ++ case $1 in
1.22210 ++ -*)set "./$1";;
1.22211 ++ esac;
1.22212 ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
1.22213 ++ ???[sx]*):;;*)false;;esac;fi
1.22214 ++ '\'' sh
1.22215 ++ '
1.22216 ++fi
1.22217 ++as_executable_p=$as_test_x
1.22218 +
1.22219 + # Sed expression to map a string onto a valid CPP name.
1.22220 + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1.22221 +@@ -231,15 +548,6 @@
1.22222 + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1.22223 +
1.22224 +
1.22225 +-# IFS
1.22226 +-# We need space, tab and new line, in precisely that order.
1.22227 +-as_nl='
1.22228 +-'
1.22229 +-IFS=" $as_nl"
1.22230 +-
1.22231 +-# CDPATH.
1.22232 +-$as_unset CDPATH
1.22233 +-
1.22234 +
1.22235 +
1.22236 + # Check that we are running under the correct shell.
1.22237 +@@ -390,29 +698,26 @@
1.22238 +
1.22239 +
1.22240 +
1.22241 ++exec 7<&0 </dev/null 6>&1
1.22242 ++
1.22243 + # Name of the host.
1.22244 + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
1.22245 + # so uname gets run too.
1.22246 + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
1.22247 +
1.22248 +-exec 6>&1
1.22249 +-
1.22250 + #
1.22251 + # Initializations.
1.22252 + #
1.22253 + ac_default_prefix=/usr/local
1.22254 ++ac_clean_files=
1.22255 + ac_config_libobj_dir=.
1.22256 ++LIBOBJS=
1.22257 + cross_compiling=no
1.22258 + subdirs=
1.22259 + MFLAGS=
1.22260 + MAKEFLAGS=
1.22261 + SHELL=${CONFIG_SHELL-/bin/sh}
1.22262 +
1.22263 +-# Maximum number of lines to put in a shell here document.
1.22264 +-# This variable seems obsolete. It should probably be removed, and
1.22265 +-# only ac_max_sed_lines should be used.
1.22266 +-: ${ac_max_here_lines=38}
1.22267 +-
1.22268 + # Identity of this package.
1.22269 + PACKAGE_NAME='newlib'
1.22270 + PACKAGE_TARNAME='newlib'
1.22271 +@@ -424,66 +729,214 @@
1.22272 + # Factoring default headers for most tests.
1.22273 + ac_includes_default="\
1.22274 + #include <stdio.h>
1.22275 +-#if HAVE_SYS_TYPES_H
1.22276 ++#ifdef HAVE_SYS_TYPES_H
1.22277 + # include <sys/types.h>
1.22278 + #endif
1.22279 +-#if HAVE_SYS_STAT_H
1.22280 ++#ifdef HAVE_SYS_STAT_H
1.22281 + # include <sys/stat.h>
1.22282 + #endif
1.22283 +-#if STDC_HEADERS
1.22284 ++#ifdef STDC_HEADERS
1.22285 + # include <stdlib.h>
1.22286 + # include <stddef.h>
1.22287 + #else
1.22288 +-# if HAVE_STDLIB_H
1.22289 ++# ifdef HAVE_STDLIB_H
1.22290 + # include <stdlib.h>
1.22291 + # endif
1.22292 + #endif
1.22293 +-#if HAVE_STRING_H
1.22294 +-# if !STDC_HEADERS && HAVE_MEMORY_H
1.22295 ++#ifdef HAVE_STRING_H
1.22296 ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
1.22297 + # include <memory.h>
1.22298 + # endif
1.22299 + # include <string.h>
1.22300 + #endif
1.22301 +-#if HAVE_STRINGS_H
1.22302 ++#ifdef HAVE_STRINGS_H
1.22303 + # include <strings.h>
1.22304 + #endif
1.22305 +-#if HAVE_INTTYPES_H
1.22306 ++#ifdef HAVE_INTTYPES_H
1.22307 + # include <inttypes.h>
1.22308 +-#else
1.22309 +-# if HAVE_STDINT_H
1.22310 +-# include <stdint.h>
1.22311 +-# endif
1.22312 + #endif
1.22313 +-#if HAVE_UNISTD_H
1.22314 ++#ifdef HAVE_STDINT_H
1.22315 ++# include <stdint.h>
1.22316 ++#endif
1.22317 ++#ifdef HAVE_UNISTD_H
1.22318 + # include <unistd.h>
1.22319 + #endif"
1.22320 +
1.22321 +-ac_subdirs_all="$ac_subdirs_all a29khif"
1.22322 +-ac_subdirs_all="$ac_subdirs_all arc"
1.22323 +-ac_subdirs_all="$ac_subdirs_all arm"
1.22324 +-ac_subdirs_all="$ac_subdirs_all d10v"
1.22325 +-ac_subdirs_all="$ac_subdirs_all decstation"
1.22326 +-ac_subdirs_all="$ac_subdirs_all h8300hms"
1.22327 +-ac_subdirs_all="$ac_subdirs_all h8500hms"
1.22328 +-ac_subdirs_all="$ac_subdirs_all linux"
1.22329 +-ac_subdirs_all="$ac_subdirs_all m88kbug"
1.22330 +-ac_subdirs_all="$ac_subdirs_all mmixware"
1.22331 +-ac_subdirs_all="$ac_subdirs_all netware"
1.22332 +-ac_subdirs_all="$ac_subdirs_all rdos"
1.22333 +-ac_subdirs_all="$ac_subdirs_all rtems"
1.22334 +-ac_subdirs_all="$ac_subdirs_all sh"
1.22335 +-ac_subdirs_all="$ac_subdirs_all sparc64"
1.22336 +-ac_subdirs_all="$ac_subdirs_all sun4"
1.22337 +-ac_subdirs_all="$ac_subdirs_all sysmec"
1.22338 +-ac_subdirs_all="$ac_subdirs_all sysnec810"
1.22339 +-ac_subdirs_all="$ac_subdirs_all sysnecv850"
1.22340 +-ac_subdirs_all="$ac_subdirs_all sysvi386"
1.22341 +-ac_subdirs_all="$ac_subdirs_all sysvnecv70"
1.22342 +-ac_subdirs_all="$ac_subdirs_all tic80"
1.22343 +-ac_subdirs_all="$ac_subdirs_all w65"
1.22344 +-ac_subdirs_all="$ac_subdirs_all z8ksim"
1.22345 +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs CRT0 HAVE_SYS_DIR_TRUE HAVE_SYS_DIR_FALSE LIBOBJS LTLIBOBJS'
1.22346 ++ac_subst_vars='SHELL
1.22347 ++PATH_SEPARATOR
1.22348 ++PACKAGE_NAME
1.22349 ++PACKAGE_TARNAME
1.22350 ++PACKAGE_VERSION
1.22351 ++PACKAGE_STRING
1.22352 ++PACKAGE_BUGREPORT
1.22353 ++exec_prefix
1.22354 ++prefix
1.22355 ++program_transform_name
1.22356 ++bindir
1.22357 ++sbindir
1.22358 ++libexecdir
1.22359 ++datarootdir
1.22360 ++datadir
1.22361 ++sysconfdir
1.22362 ++sharedstatedir
1.22363 ++localstatedir
1.22364 ++includedir
1.22365 ++oldincludedir
1.22366 ++docdir
1.22367 ++infodir
1.22368 ++htmldir
1.22369 ++dvidir
1.22370 ++pdfdir
1.22371 ++psdir
1.22372 ++libdir
1.22373 ++localedir
1.22374 ++mandir
1.22375 ++DEFS
1.22376 ++ECHO_C
1.22377 ++ECHO_N
1.22378 ++ECHO_T
1.22379 ++LIBS
1.22380 ++build_alias
1.22381 ++host_alias
1.22382 ++target_alias
1.22383 ++MAY_SUPPLY_SYSCALLS_TRUE
1.22384 ++MAY_SUPPLY_SYSCALLS_FALSE
1.22385 ++newlib_basedir
1.22386 ++build
1.22387 ++build_cpu
1.22388 ++build_vendor
1.22389 ++build_os
1.22390 ++host
1.22391 ++host_cpu
1.22392 ++host_vendor
1.22393 ++host_os
1.22394 ++INSTALL_PROGRAM
1.22395 ++INSTALL_SCRIPT
1.22396 ++INSTALL_DATA
1.22397 ++CYGPATH_W
1.22398 ++PACKAGE
1.22399 ++VERSION
1.22400 ++ACLOCAL
1.22401 ++AUTOCONF
1.22402 ++AUTOMAKE
1.22403 ++AUTOHEADER
1.22404 ++MAKEINFO
1.22405 ++install_sh
1.22406 ++STRIP
1.22407 ++INSTALL_STRIP_PROGRAM
1.22408 ++mkdir_p
1.22409 ++AWK
1.22410 ++SET_MAKE
1.22411 ++am__leading_dot
1.22412 ++AMTAR
1.22413 ++am__tar
1.22414 ++am__untar
1.22415 ++CC
1.22416 ++DEPDIR
1.22417 ++am__include
1.22418 ++am__quote
1.22419 ++AMDEP_TRUE
1.22420 ++AMDEP_FALSE
1.22421 ++AMDEPBACKSLASH
1.22422 ++CCDEPMODE
1.22423 ++am__fastdepCC_TRUE
1.22424 ++am__fastdepCC_FALSE
1.22425 ++AS
1.22426 ++AR
1.22427 ++RANLIB
1.22428 ++READELF
1.22429 ++MAINTAINER_MODE_TRUE
1.22430 ++MAINTAINER_MODE_FALSE
1.22431 ++MAINT
1.22432 ++CCAS
1.22433 ++CCASFLAGS
1.22434 ++NEWLIB_CFLAGS
1.22435 ++LDFLAGS
1.22436 ++ELIX_LEVEL_0_TRUE
1.22437 ++ELIX_LEVEL_0_FALSE
1.22438 ++ELIX_LEVEL_1_TRUE
1.22439 ++ELIX_LEVEL_1_FALSE
1.22440 ++ELIX_LEVEL_2_TRUE
1.22441 ++ELIX_LEVEL_2_FALSE
1.22442 ++ELIX_LEVEL_3_TRUE
1.22443 ++ELIX_LEVEL_3_FALSE
1.22444 ++ELIX_LEVEL_4_TRUE
1.22445 ++ELIX_LEVEL_4_FALSE
1.22446 ++USE_LIBTOOL_TRUE
1.22447 ++USE_LIBTOOL_FALSE
1.22448 ++OBJEXT
1.22449 ++oext
1.22450 ++aext
1.22451 ++lpfx
1.22452 ++libm_machine_dir
1.22453 ++machine_dir
1.22454 ++sys_dir
1.22455 ++SED
1.22456 ++DLLTOOL
1.22457 ++OBJDUMP
1.22458 ++LIBTOOL
1.22459 ++CFLAGS
1.22460 ++CPPFLAGS
1.22461 ++ac_ct_CC
1.22462 ++EXEEXT
1.22463 ++GREP
1.22464 ++EGREP
1.22465 ++FGREP
1.22466 ++LD
1.22467 ++DUMPBIN
1.22468 ++ac_ct_DUMPBIN
1.22469 ++NM
1.22470 ++LN_S
1.22471 ++lt_ECHO
1.22472 ++DSYMUTIL
1.22473 ++NMEDIT
1.22474 ++LIPO
1.22475 ++OTOOL
1.22476 ++OTOOL64
1.22477 ++CPP
1.22478 ++subdirs
1.22479 ++CRT0
1.22480 ++HAVE_SYS_DIR_TRUE
1.22481 ++HAVE_SYS_DIR_FALSE
1.22482 ++LIBOBJS
1.22483 ++LTLIBOBJS'
1.22484 + ac_subst_files=''
1.22485 ++ ac_precious_vars='build_alias
1.22486 ++host_alias
1.22487 ++target_alias
1.22488 ++CCAS
1.22489 ++CCASFLAGS
1.22490 ++CC
1.22491 ++CFLAGS
1.22492 ++LDFLAGS
1.22493 ++LIBS
1.22494 ++CPPFLAGS
1.22495 ++CPP'
1.22496 ++ac_subdirs_all='a29khif
1.22497 ++arc
1.22498 ++arm
1.22499 ++avr32
1.22500 ++d10v
1.22501 ++decstation
1.22502 ++h8300hms
1.22503 ++h8500hms
1.22504 ++linux
1.22505 ++m88kbug
1.22506 ++mmixware
1.22507 ++netware
1.22508 ++rdos
1.22509 ++rtems
1.22510 ++sh
1.22511 ++sparc64
1.22512 ++sun4
1.22513 ++sysmec
1.22514 ++sysnec810
1.22515 ++sysnecv850
1.22516 ++sysvi386
1.22517 ++sysvnecv70
1.22518 ++tic80
1.22519 ++w65
1.22520 ++z8ksim'
1.22521 +
1.22522 + # Initialize some variables set by options.
1.22523 + ac_init_help=
1.22524 +@@ -510,34 +963,48 @@
1.22525 + # and all the variables that are supposed to be based on exec_prefix
1.22526 + # by default will actually change.
1.22527 + # Use braces instead of parens because sh, perl, etc. also accept them.
1.22528 ++# (The list follows the same order as the GNU Coding Standards.)
1.22529 + bindir='${exec_prefix}/bin'
1.22530 + sbindir='${exec_prefix}/sbin'
1.22531 + libexecdir='${exec_prefix}/libexec'
1.22532 +-datadir='${prefix}/share'
1.22533 ++datarootdir='${prefix}/share'
1.22534 ++datadir='${datarootdir}'
1.22535 + sysconfdir='${prefix}/etc'
1.22536 + sharedstatedir='${prefix}/com'
1.22537 + localstatedir='${prefix}/var'
1.22538 +-libdir='${exec_prefix}/lib'
1.22539 + includedir='${prefix}/include'
1.22540 + oldincludedir='/usr/include'
1.22541 +-infodir='${prefix}/info'
1.22542 +-mandir='${prefix}/man'
1.22543 ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
1.22544 ++infodir='${datarootdir}/info'
1.22545 ++htmldir='${docdir}'
1.22546 ++dvidir='${docdir}'
1.22547 ++pdfdir='${docdir}'
1.22548 ++psdir='${docdir}'
1.22549 ++libdir='${exec_prefix}/lib'
1.22550 ++localedir='${datarootdir}/locale'
1.22551 ++mandir='${datarootdir}/man'
1.22552 +
1.22553 + ac_prev=
1.22554 ++ac_dashdash=
1.22555 + for ac_option
1.22556 + do
1.22557 + # If the previous option needs an argument, assign it.
1.22558 + if test -n "$ac_prev"; then
1.22559 +- eval "$ac_prev=\$ac_option"
1.22560 ++ eval $ac_prev=\$ac_option
1.22561 + ac_prev=
1.22562 + continue
1.22563 + fi
1.22564 +
1.22565 +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
1.22566 ++ case $ac_option in
1.22567 ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
1.22568 ++ *) ac_optarg=yes ;;
1.22569 ++ esac
1.22570 +
1.22571 + # Accept the important Cygnus configure options, so we can diagnose typos.
1.22572 +
1.22573 +- case $ac_option in
1.22574 ++ case $ac_dashdash$ac_option in
1.22575 ++ --)
1.22576 ++ ac_dashdash=yes ;;
1.22577 +
1.22578 + -bindir | --bindir | --bindi | --bind | --bin | --bi)
1.22579 + ac_prev=bindir ;;
1.22580 +@@ -559,33 +1026,45 @@
1.22581 + --config-cache | -C)
1.22582 + cache_file=config.cache ;;
1.22583 +
1.22584 +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
1.22585 ++ -datadir | --datadir | --datadi | --datad)
1.22586 + ac_prev=datadir ;;
1.22587 +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
1.22588 +- | --da=*)
1.22589 ++ -datadir=* | --datadir=* | --datadi=* | --datad=*)
1.22590 + datadir=$ac_optarg ;;
1.22591 +
1.22592 ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
1.22593 ++ | --dataroo | --dataro | --datar)
1.22594 ++ ac_prev=datarootdir ;;
1.22595 ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
1.22596 ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
1.22597 ++ datarootdir=$ac_optarg ;;
1.22598 ++
1.22599 + -disable-* | --disable-*)
1.22600 + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
1.22601 + # Reject names that are not valid shell variable names.
1.22602 +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
1.22603 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.22604 + { echo "$as_me: error: invalid feature name: $ac_feature" >&2
1.22605 + { (exit 1); exit 1; }; }
1.22606 +- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
1.22607 +- eval "enable_$ac_feature=no" ;;
1.22608 ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
1.22609 ++ eval enable_$ac_feature=no ;;
1.22610 ++
1.22611 ++ -docdir | --docdir | --docdi | --doc | --do)
1.22612 ++ ac_prev=docdir ;;
1.22613 ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
1.22614 ++ docdir=$ac_optarg ;;
1.22615 ++
1.22616 ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
1.22617 ++ ac_prev=dvidir ;;
1.22618 ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
1.22619 ++ dvidir=$ac_optarg ;;
1.22620 +
1.22621 + -enable-* | --enable-*)
1.22622 + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
1.22623 + # Reject names that are not valid shell variable names.
1.22624 +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
1.22625 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.22626 + { echo "$as_me: error: invalid feature name: $ac_feature" >&2
1.22627 + { (exit 1); exit 1; }; }
1.22628 +- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
1.22629 +- case $ac_option in
1.22630 +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
1.22631 +- *) ac_optarg=yes ;;
1.22632 +- esac
1.22633 +- eval "enable_$ac_feature='$ac_optarg'" ;;
1.22634 ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
1.22635 ++ eval enable_$ac_feature=\$ac_optarg ;;
1.22636 +
1.22637 + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
1.22638 + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
1.22639 +@@ -612,6 +1091,12 @@
1.22640 + -host=* | --host=* | --hos=* | --ho=*)
1.22641 + host_alias=$ac_optarg ;;
1.22642 +
1.22643 ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
1.22644 ++ ac_prev=htmldir ;;
1.22645 ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
1.22646 ++ | --ht=*)
1.22647 ++ htmldir=$ac_optarg ;;
1.22648 ++
1.22649 + -includedir | --includedir | --includedi | --included | --include \
1.22650 + | --includ | --inclu | --incl | --inc)
1.22651 + ac_prev=includedir ;;
1.22652 +@@ -636,13 +1121,16 @@
1.22653 + | --libexe=* | --libex=* | --libe=*)
1.22654 + libexecdir=$ac_optarg ;;
1.22655 +
1.22656 ++ -localedir | --localedir | --localedi | --localed | --locale)
1.22657 ++ ac_prev=localedir ;;
1.22658 ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
1.22659 ++ localedir=$ac_optarg ;;
1.22660 ++
1.22661 + -localstatedir | --localstatedir | --localstatedi | --localstated \
1.22662 +- | --localstate | --localstat | --localsta | --localst \
1.22663 +- | --locals | --local | --loca | --loc | --lo)
1.22664 ++ | --localstate | --localstat | --localsta | --localst | --locals)
1.22665 + ac_prev=localstatedir ;;
1.22666 + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
1.22667 +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
1.22668 +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
1.22669 ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
1.22670 + localstatedir=$ac_optarg ;;
1.22671 +
1.22672 + -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
1.22673 +@@ -707,6 +1195,16 @@
1.22674 + | --progr-tra=* | --program-tr=* | --program-t=*)
1.22675 + program_transform_name=$ac_optarg ;;
1.22676 +
1.22677 ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
1.22678 ++ ac_prev=pdfdir ;;
1.22679 ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
1.22680 ++ pdfdir=$ac_optarg ;;
1.22681 ++
1.22682 ++ -psdir | --psdir | --psdi | --psd | --ps)
1.22683 ++ ac_prev=psdir ;;
1.22684 ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
1.22685 ++ psdir=$ac_optarg ;;
1.22686 ++
1.22687 + -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.22688 + | -silent | --silent | --silen | --sile | --sil)
1.22689 + silent=yes ;;
1.22690 +@@ -759,24 +1257,20 @@
1.22691 + -with-* | --with-*)
1.22692 + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
1.22693 + # Reject names that are not valid shell variable names.
1.22694 +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
1.22695 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.22696 + { echo "$as_me: error: invalid package name: $ac_package" >&2
1.22697 + { (exit 1); exit 1; }; }
1.22698 +- ac_package=`echo $ac_package| sed 's/-/_/g'`
1.22699 +- case $ac_option in
1.22700 +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
1.22701 +- *) ac_optarg=yes ;;
1.22702 +- esac
1.22703 +- eval "with_$ac_package='$ac_optarg'" ;;
1.22704 ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
1.22705 ++ eval with_$ac_package=\$ac_optarg ;;
1.22706 +
1.22707 + -without-* | --without-*)
1.22708 + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
1.22709 + # Reject names that are not valid shell variable names.
1.22710 +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
1.22711 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
1.22712 + { echo "$as_me: error: invalid package name: $ac_package" >&2
1.22713 + { (exit 1); exit 1; }; }
1.22714 +- ac_package=`echo $ac_package | sed 's/-/_/g'`
1.22715 +- eval "with_$ac_package=no" ;;
1.22716 ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
1.22717 ++ eval with_$ac_package=no ;;
1.22718 +
1.22719 + --x)
1.22720 + # Obsolete; use --with-x.
1.22721 +@@ -807,8 +1301,7 @@
1.22722 + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
1.22723 + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
1.22724 + { (exit 1); exit 1; }; }
1.22725 +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
1.22726 +- eval "$ac_envvar='$ac_optarg'"
1.22727 ++ eval $ac_envvar=\$ac_optarg
1.22728 + export $ac_envvar ;;
1.22729 +
1.22730 + *)
1.22731 +@@ -828,27 +1321,19 @@
1.22732 + { (exit 1); exit 1; }; }
1.22733 + fi
1.22734 +
1.22735 +-# Be sure to have absolute paths.
1.22736 +-for ac_var in exec_prefix prefix
1.22737 +-do
1.22738 +- eval ac_val=$`echo $ac_var`
1.22739 +- case $ac_val in
1.22740 +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
1.22741 +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
1.22742 +- { (exit 1); exit 1; }; };;
1.22743 +- esac
1.22744 +-done
1.22745 +-
1.22746 +-# Be sure to have absolute paths.
1.22747 +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
1.22748 +- localstatedir libdir includedir oldincludedir infodir mandir
1.22749 ++# Be sure to have absolute directory names.
1.22750 ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
1.22751 ++ datadir sysconfdir sharedstatedir localstatedir includedir \
1.22752 ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
1.22753 ++ libdir localedir mandir
1.22754 + do
1.22755 +- eval ac_val=$`echo $ac_var`
1.22756 ++ eval ac_val=\$$ac_var
1.22757 + case $ac_val in
1.22758 +- [\\/$]* | ?:[\\/]* ) ;;
1.22759 +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
1.22760 +- { (exit 1); exit 1; }; };;
1.22761 ++ [\\/$]* | ?:[\\/]* ) continue;;
1.22762 ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
1.22763 + esac
1.22764 ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
1.22765 ++ { (exit 1); exit 1; }; }
1.22766 + done
1.22767 +
1.22768 + # There might be people who depend on the old broken behavior: `$host'
1.22769 +@@ -875,82 +1360,76 @@
1.22770 + test "$silent" = yes && exec 6>/dev/null
1.22771 +
1.22772 +
1.22773 ++ac_pwd=`pwd` && test -n "$ac_pwd" &&
1.22774 ++ac_ls_di=`ls -di .` &&
1.22775 ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
1.22776 ++ { echo "$as_me: error: Working directory cannot be determined" >&2
1.22777 ++ { (exit 1); exit 1; }; }
1.22778 ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
1.22779 ++ { echo "$as_me: error: pwd does not report name of working directory" >&2
1.22780 ++ { (exit 1); exit 1; }; }
1.22781 ++
1.22782 ++
1.22783 + # Find the source files, if location was not specified.
1.22784 + if test -z "$srcdir"; then
1.22785 + ac_srcdir_defaulted=yes
1.22786 +- # Try the directory containing this script, then its parent.
1.22787 +- ac_confdir=`(dirname "$0") 2>/dev/null ||
1.22788 ++ # Try the directory containing this script, then the parent directory.
1.22789 ++ ac_confdir=`$as_dirname -- "$0" ||
1.22790 + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.22791 + X"$0" : 'X\(//\)[^/]' \| \
1.22792 + X"$0" : 'X\(//\)$' \| \
1.22793 +- X"$0" : 'X\(/\)' \| \
1.22794 +- . : '\(.\)' 2>/dev/null ||
1.22795 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.22796 + echo X"$0" |
1.22797 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.22798 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.22799 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.22800 +- /^X\(\/\).*/{ s//\1/; q; }
1.22801 +- s/.*/./; q'`
1.22802 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.22803 ++ s//\1/
1.22804 ++ q
1.22805 ++ }
1.22806 ++ /^X\(\/\/\)[^/].*/{
1.22807 ++ s//\1/
1.22808 ++ q
1.22809 ++ }
1.22810 ++ /^X\(\/\/\)$/{
1.22811 ++ s//\1/
1.22812 ++ q
1.22813 ++ }
1.22814 ++ /^X\(\/\).*/{
1.22815 ++ s//\1/
1.22816 ++ q
1.22817 ++ }
1.22818 ++ s/.*/./; q'`
1.22819 + srcdir=$ac_confdir
1.22820 +- if test ! -r $srcdir/$ac_unique_file; then
1.22821 ++ if test ! -r "$srcdir/$ac_unique_file"; then
1.22822 + srcdir=..
1.22823 + fi
1.22824 + else
1.22825 + ac_srcdir_defaulted=no
1.22826 + fi
1.22827 +-if test ! -r $srcdir/$ac_unique_file; then
1.22828 +- if test "$ac_srcdir_defaulted" = yes; then
1.22829 +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
1.22830 +- { (exit 1); exit 1; }; }
1.22831 +- else
1.22832 +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
1.22833 +- { (exit 1); exit 1; }; }
1.22834 +- fi
1.22835 +-fi
1.22836 +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
1.22837 +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
1.22838 +- { (exit 1); exit 1; }; }
1.22839 +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
1.22840 +-ac_env_build_alias_set=${build_alias+set}
1.22841 +-ac_env_build_alias_value=$build_alias
1.22842 +-ac_cv_env_build_alias_set=${build_alias+set}
1.22843 +-ac_cv_env_build_alias_value=$build_alias
1.22844 +-ac_env_host_alias_set=${host_alias+set}
1.22845 +-ac_env_host_alias_value=$host_alias
1.22846 +-ac_cv_env_host_alias_set=${host_alias+set}
1.22847 +-ac_cv_env_host_alias_value=$host_alias
1.22848 +-ac_env_target_alias_set=${target_alias+set}
1.22849 +-ac_env_target_alias_value=$target_alias
1.22850 +-ac_cv_env_target_alias_set=${target_alias+set}
1.22851 +-ac_cv_env_target_alias_value=$target_alias
1.22852 +-ac_env_CCAS_set=${CCAS+set}
1.22853 +-ac_env_CCAS_value=$CCAS
1.22854 +-ac_cv_env_CCAS_set=${CCAS+set}
1.22855 +-ac_cv_env_CCAS_value=$CCAS
1.22856 +-ac_env_CCASFLAGS_set=${CCASFLAGS+set}
1.22857 +-ac_env_CCASFLAGS_value=$CCASFLAGS
1.22858 +-ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set}
1.22859 +-ac_cv_env_CCASFLAGS_value=$CCASFLAGS
1.22860 +-ac_env_CC_set=${CC+set}
1.22861 +-ac_env_CC_value=$CC
1.22862 +-ac_cv_env_CC_set=${CC+set}
1.22863 +-ac_cv_env_CC_value=$CC
1.22864 +-ac_env_CFLAGS_set=${CFLAGS+set}
1.22865 +-ac_env_CFLAGS_value=$CFLAGS
1.22866 +-ac_cv_env_CFLAGS_set=${CFLAGS+set}
1.22867 +-ac_cv_env_CFLAGS_value=$CFLAGS
1.22868 +-ac_env_LDFLAGS_set=${LDFLAGS+set}
1.22869 +-ac_env_LDFLAGS_value=$LDFLAGS
1.22870 +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
1.22871 +-ac_cv_env_LDFLAGS_value=$LDFLAGS
1.22872 +-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
1.22873 +-ac_env_CPPFLAGS_value=$CPPFLAGS
1.22874 +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
1.22875 +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
1.22876 +-ac_env_CPP_set=${CPP+set}
1.22877 +-ac_env_CPP_value=$CPP
1.22878 +-ac_cv_env_CPP_set=${CPP+set}
1.22879 +-ac_cv_env_CPP_value=$CPP
1.22880 ++if test ! -r "$srcdir/$ac_unique_file"; then
1.22881 ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
1.22882 ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
1.22883 ++ { (exit 1); exit 1; }; }
1.22884 ++fi
1.22885 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
1.22886 ++ac_abs_confdir=`(
1.22887 ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
1.22888 ++ { (exit 1); exit 1; }; }
1.22889 ++ pwd)`
1.22890 ++# When building in place, set srcdir=.
1.22891 ++if test "$ac_abs_confdir" = "$ac_pwd"; then
1.22892 ++ srcdir=.
1.22893 ++fi
1.22894 ++# Remove unnecessary trailing slashes from srcdir.
1.22895 ++# Double slashes in file names in object file debugging info
1.22896 ++# mess up M-x gdb in Emacs.
1.22897 ++case $srcdir in
1.22898 ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
1.22899 ++esac
1.22900 ++for ac_var in $ac_precious_vars; do
1.22901 ++ eval ac_env_${ac_var}_set=\${${ac_var}+set}
1.22902 ++ eval ac_env_${ac_var}_value=\$${ac_var}
1.22903 ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
1.22904 ++ eval ac_cv_env_${ac_var}_value=\$${ac_var}
1.22905 ++done
1.22906 +
1.22907 + #
1.22908 + # Report the --help message.
1.22909 +@@ -979,9 +1458,6 @@
1.22910 + -n, --no-create do not create output files
1.22911 + --srcdir=DIR find the sources in DIR [configure dir or \`..']
1.22912 +
1.22913 +-_ACEOF
1.22914 +-
1.22915 +- cat <<_ACEOF
1.22916 + Installation directories:
1.22917 + --prefix=PREFIX install architecture-independent files in PREFIX
1.22918 + [$ac_default_prefix]
1.22919 +@@ -999,15 +1475,22 @@
1.22920 + --bindir=DIR user executables [EPREFIX/bin]
1.22921 + --sbindir=DIR system admin executables [EPREFIX/sbin]
1.22922 + --libexecdir=DIR program executables [EPREFIX/libexec]
1.22923 +- --datadir=DIR read-only architecture-independent data [PREFIX/share]
1.22924 + --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
1.22925 + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
1.22926 + --localstatedir=DIR modifiable single-machine data [PREFIX/var]
1.22927 + --libdir=DIR object code libraries [EPREFIX/lib]
1.22928 + --includedir=DIR C header files [PREFIX/include]
1.22929 + --oldincludedir=DIR C header files for non-gcc [/usr/include]
1.22930 +- --infodir=DIR info documentation [PREFIX/info]
1.22931 +- --mandir=DIR man documentation [PREFIX/man]
1.22932 ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
1.22933 ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
1.22934 ++ --infodir=DIR info documentation [DATAROOTDIR/info]
1.22935 ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
1.22936 ++ --mandir=DIR man documentation [DATAROOTDIR/man]
1.22937 ++ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib]
1.22938 ++ --htmldir=DIR html documentation [DOCDIR]
1.22939 ++ --dvidir=DIR dvi documentation [DOCDIR]
1.22940 ++ --pdfdir=DIR pdf documentation [DOCDIR]
1.22941 ++ --psdir=DIR ps documentation [DOCDIR]
1.22942 + _ACEOF
1.22943 +
1.22944 + cat <<\_ACEOF
1.22945 +@@ -1044,10 +1527,8 @@
1.22946 + --enable-dependency-tracking do not reject slow dependency extractors
1.22947 + --enable-maintainer-mode enable make rules and dependencies not useful
1.22948 + (and sometimes confusing) to the casual installer
1.22949 +- --enable-shared[=PKGS]
1.22950 +- build shared libraries [default=yes]
1.22951 +- --enable-static[=PKGS]
1.22952 +- build static libraries [default=yes]
1.22953 ++ --enable-shared[=PKGS] build shared libraries [default=yes]
1.22954 ++ --enable-static[=PKGS] build static libraries [default=yes]
1.22955 + --enable-fast-install[=PKGS]
1.22956 + optimize for fast installation [default=yes]
1.22957 + --disable-libtool-lock avoid locking (might break parallel builds)
1.22958 +@@ -1066,128 +1547,95 @@
1.22959 + CFLAGS C compiler flags
1.22960 + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
1.22961 + nonstandard directory <lib dir>
1.22962 +- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
1.22963 +- headers in a nonstandard directory <include dir>
1.22964 ++ LIBS libraries to pass to the linker, e.g. -l<library>
1.22965 ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
1.22966 ++ you have headers in a nonstandard directory <include dir>
1.22967 + CPP C preprocessor
1.22968 +
1.22969 + Use these variables to override the choices made by `configure' or to help
1.22970 + it to find libraries and programs with nonstandard names/locations.
1.22971 +
1.22972 + _ACEOF
1.22973 ++ac_status=$?
1.22974 + fi
1.22975 +
1.22976 + if test "$ac_init_help" = "recursive"; then
1.22977 + # If there are subdirs, report their specific --help.
1.22978 +- ac_popdir=`pwd`
1.22979 + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
1.22980 +- test -d $ac_dir || continue
1.22981 ++ test -d "$ac_dir" || continue
1.22982 + ac_builddir=.
1.22983 +
1.22984 +-if test "$ac_dir" != .; then
1.22985 ++case "$ac_dir" in
1.22986 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.22987 ++*)
1.22988 + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.22989 +- # A "../" for each directory in $ac_dir_suffix.
1.22990 +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1.22991 +-else
1.22992 +- ac_dir_suffix= ac_top_builddir=
1.22993 +-fi
1.22994 ++ # A ".." for each directory in $ac_dir_suffix.
1.22995 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.22996 ++ case $ac_top_builddir_sub in
1.22997 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.22998 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.22999 ++ esac ;;
1.23000 ++esac
1.23001 ++ac_abs_top_builddir=$ac_pwd
1.23002 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.23003 ++# for backward compatibility:
1.23004 ++ac_top_builddir=$ac_top_build_prefix
1.23005 +
1.23006 + case $srcdir in
1.23007 +- .) # No --srcdir option. We are building in place.
1.23008 ++ .) # We are building in place.
1.23009 + ac_srcdir=.
1.23010 +- if test -z "$ac_top_builddir"; then
1.23011 +- ac_top_srcdir=.
1.23012 +- else
1.23013 +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1.23014 +- fi ;;
1.23015 +- [\\/]* | ?:[\\/]* ) # Absolute path.
1.23016 ++ ac_top_srcdir=$ac_top_builddir_sub
1.23017 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.23018 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.23019 + ac_srcdir=$srcdir$ac_dir_suffix;
1.23020 +- ac_top_srcdir=$srcdir ;;
1.23021 +- *) # Relative path.
1.23022 +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1.23023 +- ac_top_srcdir=$ac_top_builddir$srcdir ;;
1.23024 +-esac
1.23025 +-
1.23026 +-# Do not use `cd foo && pwd` to compute absolute paths, because
1.23027 +-# the directories may not exist.
1.23028 +-case `pwd` in
1.23029 +-.) ac_abs_builddir="$ac_dir";;
1.23030 +-*)
1.23031 +- case "$ac_dir" in
1.23032 +- .) ac_abs_builddir=`pwd`;;
1.23033 +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
1.23034 +- *) ac_abs_builddir=`pwd`/"$ac_dir";;
1.23035 +- esac;;
1.23036 +-esac
1.23037 +-case $ac_abs_builddir in
1.23038 +-.) ac_abs_top_builddir=${ac_top_builddir}.;;
1.23039 +-*)
1.23040 +- case ${ac_top_builddir}. in
1.23041 +- .) ac_abs_top_builddir=$ac_abs_builddir;;
1.23042 +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
1.23043 +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
1.23044 +- esac;;
1.23045 +-esac
1.23046 +-case $ac_abs_builddir in
1.23047 +-.) ac_abs_srcdir=$ac_srcdir;;
1.23048 +-*)
1.23049 +- case $ac_srcdir in
1.23050 +- .) ac_abs_srcdir=$ac_abs_builddir;;
1.23051 +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
1.23052 +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
1.23053 +- esac;;
1.23054 +-esac
1.23055 +-case $ac_abs_builddir in
1.23056 +-.) ac_abs_top_srcdir=$ac_top_srcdir;;
1.23057 +-*)
1.23058 +- case $ac_top_srcdir in
1.23059 +- .) ac_abs_top_srcdir=$ac_abs_builddir;;
1.23060 +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
1.23061 +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
1.23062 +- esac;;
1.23063 ++ ac_top_srcdir=$srcdir
1.23064 ++ ac_abs_top_srcdir=$srcdir ;;
1.23065 ++ *) # Relative name.
1.23066 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.23067 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.23068 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.23069 + esac
1.23070 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.23071 +
1.23072 +- cd $ac_dir
1.23073 +- # Check for guested configure; otherwise get Cygnus style configure.
1.23074 +- if test -f $ac_srcdir/configure.gnu; then
1.23075 +- echo
1.23076 +- $SHELL $ac_srcdir/configure.gnu --help=recursive
1.23077 +- elif test -f $ac_srcdir/configure; then
1.23078 +- echo
1.23079 +- $SHELL $ac_srcdir/configure --help=recursive
1.23080 +- elif test -f $ac_srcdir/configure.ac ||
1.23081 +- test -f $ac_srcdir/configure.in; then
1.23082 +- echo
1.23083 +- $ac_configure --help
1.23084 ++ cd "$ac_dir" || { ac_status=$?; continue; }
1.23085 ++ # Check for guested configure.
1.23086 ++ if test -f "$ac_srcdir/configure.gnu"; then
1.23087 ++ echo &&
1.23088 ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
1.23089 ++ elif test -f "$ac_srcdir/configure"; then
1.23090 ++ echo &&
1.23091 ++ $SHELL "$ac_srcdir/configure" --help=recursive
1.23092 + else
1.23093 + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
1.23094 +- fi
1.23095 +- cd $ac_popdir
1.23096 ++ fi || ac_status=$?
1.23097 ++ cd "$ac_pwd" || { ac_status=$?; break; }
1.23098 + done
1.23099 + fi
1.23100 +
1.23101 +-test -n "$ac_init_help" && exit 0
1.23102 ++test -n "$ac_init_help" && exit $ac_status
1.23103 + if $ac_init_version; then
1.23104 + cat <<\_ACEOF
1.23105 + newlib configure 1.17.0
1.23106 +-generated by GNU Autoconf 2.59
1.23107 ++generated by GNU Autoconf 2.61
1.23108 +
1.23109 +-Copyright (C) 2003 Free Software Foundation, Inc.
1.23110 ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
1.23111 ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.23112 + This configure script is free software; the Free Software Foundation
1.23113 + gives unlimited permission to copy, distribute and modify it.
1.23114 + _ACEOF
1.23115 +- exit 0
1.23116 ++ exit
1.23117 + fi
1.23118 +-exec 5>config.log
1.23119 +-cat >&5 <<_ACEOF
1.23120 ++cat >config.log <<_ACEOF
1.23121 + This file contains any messages produced by compilers while
1.23122 + running configure, to aid debugging if configure makes a mistake.
1.23123 +
1.23124 + It was created by newlib $as_me 1.17.0, which was
1.23125 +-generated by GNU Autoconf 2.59. Invocation command line was
1.23126 ++generated by GNU Autoconf 2.61. Invocation command line was
1.23127 +
1.23128 + $ $0 $@
1.23129 +
1.23130 + _ACEOF
1.23131 ++exec 5>>config.log
1.23132 + {
1.23133 + cat <<_ASUNAME
1.23134 + ## --------- ##
1.23135 +@@ -1206,7 +1654,7 @@
1.23136 + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
1.23137 + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
1.23138 + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
1.23139 +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
1.23140 ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
1.23141 + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
1.23142 + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
1.23143 + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
1.23144 +@@ -1220,6 +1668,7 @@
1.23145 + test -z "$as_dir" && as_dir=.
1.23146 + echo "PATH: $as_dir"
1.23147 + done
1.23148 ++IFS=$as_save_IFS
1.23149 +
1.23150 + } >&5
1.23151 +
1.23152 +@@ -1241,7 +1690,6 @@
1.23153 + ac_configure_args=
1.23154 + ac_configure_args0=
1.23155 + ac_configure_args1=
1.23156 +-ac_sep=
1.23157 + ac_must_keep_next=false
1.23158 + for ac_pass in 1 2
1.23159 + do
1.23160 +@@ -1252,7 +1700,7 @@
1.23161 + -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.23162 + | -silent | --silent | --silen | --sile | --sil)
1.23163 + continue ;;
1.23164 +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
1.23165 ++ *\'*)
1.23166 + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
1.23167 + esac
1.23168 + case $ac_pass in
1.23169 +@@ -1274,9 +1722,7 @@
1.23170 + -* ) ac_must_keep_next=true ;;
1.23171 + esac
1.23172 + fi
1.23173 +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
1.23174 +- # Get rid of the leading space.
1.23175 +- ac_sep=" "
1.23176 ++ ac_configure_args="$ac_configure_args '$ac_arg'"
1.23177 + ;;
1.23178 + esac
1.23179 + done
1.23180 +@@ -1287,8 +1733,8 @@
1.23181 + # When interrupted or exit'd, cleanup temporary files, and complete
1.23182 + # config.log. We remove comments because anyway the quotes in there
1.23183 + # would cause problems or look ugly.
1.23184 +-# WARNING: Be sure not to use single quotes in there, as some shells,
1.23185 +-# such as our DU 5.0 friend, will then `close' the trap.
1.23186 ++# WARNING: Use '\'' to represent an apostrophe within the trap.
1.23187 ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
1.23188 + trap 'exit_status=$?
1.23189 + # Save into config.log some information that might help in debugging.
1.23190 + {
1.23191 +@@ -1301,20 +1747,34 @@
1.23192 + _ASBOX
1.23193 + echo
1.23194 + # The following way of writing the cache mishandles newlines in values,
1.23195 +-{
1.23196 ++(
1.23197 ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
1.23198 ++ eval ac_val=\$$ac_var
1.23199 ++ case $ac_val in #(
1.23200 ++ *${as_nl}*)
1.23201 ++ case $ac_var in #(
1.23202 ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
1.23203 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
1.23204 ++ esac
1.23205 ++ case $ac_var in #(
1.23206 ++ _ | IFS | as_nl) ;; #(
1.23207 ++ *) $as_unset $ac_var ;;
1.23208 ++ esac ;;
1.23209 ++ esac
1.23210 ++ done
1.23211 + (set) 2>&1 |
1.23212 +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
1.23213 +- *ac_space=\ *)
1.23214 ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
1.23215 ++ *${as_nl}ac_space=\ *)
1.23216 + sed -n \
1.23217 +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
1.23218 +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
1.23219 +- ;;
1.23220 ++ "s/'\''/'\''\\\\'\'''\''/g;
1.23221 ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
1.23222 ++ ;; #(
1.23223 + *)
1.23224 +- sed -n \
1.23225 +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1.23226 ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
1.23227 + ;;
1.23228 +- esac;
1.23229 +-}
1.23230 ++ esac |
1.23231 ++ sort
1.23232 ++)
1.23233 + echo
1.23234 +
1.23235 + cat <<\_ASBOX
1.23236 +@@ -1325,22 +1785,28 @@
1.23237 + echo
1.23238 + for ac_var in $ac_subst_vars
1.23239 + do
1.23240 +- eval ac_val=$`echo $ac_var`
1.23241 +- echo "$ac_var='"'"'$ac_val'"'"'"
1.23242 ++ eval ac_val=\$$ac_var
1.23243 ++ case $ac_val in
1.23244 ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
1.23245 ++ esac
1.23246 ++ echo "$ac_var='\''$ac_val'\''"
1.23247 + done | sort
1.23248 + echo
1.23249 +
1.23250 + if test -n "$ac_subst_files"; then
1.23251 + cat <<\_ASBOX
1.23252 +-## ------------- ##
1.23253 +-## Output files. ##
1.23254 +-## ------------- ##
1.23255 ++## ------------------- ##
1.23256 ++## File substitutions. ##
1.23257 ++## ------------------- ##
1.23258 + _ASBOX
1.23259 + echo
1.23260 + for ac_var in $ac_subst_files
1.23261 + do
1.23262 +- eval ac_val=$`echo $ac_var`
1.23263 +- echo "$ac_var='"'"'$ac_val'"'"'"
1.23264 ++ eval ac_val=\$$ac_var
1.23265 ++ case $ac_val in
1.23266 ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
1.23267 ++ esac
1.23268 ++ echo "$ac_var='\''$ac_val'\''"
1.23269 + done | sort
1.23270 + echo
1.23271 + fi
1.23272 +@@ -1352,26 +1818,24 @@
1.23273 + ## ----------- ##
1.23274 + _ASBOX
1.23275 + echo
1.23276 +- sed "/^$/d" confdefs.h | sort
1.23277 ++ cat confdefs.h
1.23278 + echo
1.23279 + fi
1.23280 + test "$ac_signal" != 0 &&
1.23281 + echo "$as_me: caught signal $ac_signal"
1.23282 + echo "$as_me: exit $exit_status"
1.23283 + } >&5
1.23284 +- rm -f core *.core &&
1.23285 +- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
1.23286 ++ rm -f core *.core core.conftest.* &&
1.23287 ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
1.23288 + exit $exit_status
1.23289 +- ' 0
1.23290 ++' 0
1.23291 + for ac_signal in 1 2 13 15; do
1.23292 + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
1.23293 + done
1.23294 + ac_signal=0
1.23295 +
1.23296 + # confdefs.h avoids OS command line length limits that DEFS can exceed.
1.23297 +-rm -rf conftest* confdefs.h
1.23298 +-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
1.23299 +-echo >confdefs.h
1.23300 ++rm -f -r conftest* confdefs.h
1.23301 +
1.23302 + # Predefined preprocessor variables.
1.23303 +
1.23304 +@@ -1402,14 +1866,17 @@
1.23305 +
1.23306 + # Let the site file select an alternate cache file if it wants to.
1.23307 + # Prefer explicitly selected file to automatically selected ones.
1.23308 +-if test -z "$CONFIG_SITE"; then
1.23309 +- if test "x$prefix" != xNONE; then
1.23310 +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
1.23311 +- else
1.23312 +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
1.23313 +- fi
1.23314 ++if test -n "$CONFIG_SITE"; then
1.23315 ++ set x "$CONFIG_SITE"
1.23316 ++elif test "x$prefix" != xNONE; then
1.23317 ++ set x "$prefix/share/config.site" "$prefix/etc/config.site"
1.23318 ++else
1.23319 ++ set x "$ac_default_prefix/share/config.site" \
1.23320 ++ "$ac_default_prefix/etc/config.site"
1.23321 + fi
1.23322 +-for ac_site_file in $CONFIG_SITE; do
1.23323 ++shift
1.23324 ++for ac_site_file
1.23325 ++do
1.23326 + if test -r "$ac_site_file"; then
1.23327 + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
1.23328 + echo "$as_me: loading site script $ac_site_file" >&6;}
1.23329 +@@ -1425,8 +1892,8 @@
1.23330 + { echo "$as_me:$LINENO: loading cache $cache_file" >&5
1.23331 + echo "$as_me: loading cache $cache_file" >&6;}
1.23332 + case $cache_file in
1.23333 +- [\\/]* | ?:[\\/]* ) . $cache_file;;
1.23334 +- *) . ./$cache_file;;
1.23335 ++ [\\/]* | ?:[\\/]* ) . "$cache_file";;
1.23336 ++ *) . "./$cache_file";;
1.23337 + esac
1.23338 + fi
1.23339 + else
1.23340 +@@ -1438,12 +1905,11 @@
1.23341 + # Check that the precious variables saved in the cache have kept the same
1.23342 + # value.
1.23343 + ac_cache_corrupted=false
1.23344 +-for ac_var in `(set) 2>&1 |
1.23345 +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
1.23346 ++for ac_var in $ac_precious_vars; do
1.23347 + eval ac_old_set=\$ac_cv_env_${ac_var}_set
1.23348 + eval ac_new_set=\$ac_env_${ac_var}_set
1.23349 +- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
1.23350 +- eval ac_new_val="\$ac_env_${ac_var}_value"
1.23351 ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value
1.23352 ++ eval ac_new_val=\$ac_env_${ac_var}_value
1.23353 + case $ac_old_set,$ac_new_set in
1.23354 + set,)
1.23355 + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
1.23356 +@@ -1468,8 +1934,7 @@
1.23357 + # Pass precious variables to config.status.
1.23358 + if test "$ac_new_set" = set; then
1.23359 + case $ac_new_val in
1.23360 +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
1.23361 +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1.23362 ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1.23363 + *) ac_arg=$ac_var=$ac_new_val ;;
1.23364 + esac
1.23365 + case " $ac_configure_args " in
1.23366 +@@ -1486,12 +1951,6 @@
1.23367 + { (exit 1); exit 1; }; }
1.23368 + fi
1.23369 +
1.23370 +-ac_ext=c
1.23371 +-ac_cpp='$CPP $CPPFLAGS'
1.23372 +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.23373 +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1.23374 +-ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.23375 +-
1.23376 +
1.23377 +
1.23378 +
1.23379 +@@ -1516,67 +1975,92 @@
1.23380 +
1.23381 +
1.23382 +
1.23383 ++ac_ext=c
1.23384 ++ac_cpp='$CPP $CPPFLAGS'
1.23385 ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.23386 ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1.23387 ++ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.23388 +
1.23389 +
1.23390 +
1.23391 +
1.23392 + ac_aux_dir=
1.23393 +-for ac_dir in ../../.. $srcdir/../../..; do
1.23394 +- if test -f $ac_dir/install-sh; then
1.23395 ++for ac_dir in ../../.. "$srcdir"/../../..; do
1.23396 ++ if test -f "$ac_dir/install-sh"; then
1.23397 + ac_aux_dir=$ac_dir
1.23398 + ac_install_sh="$ac_aux_dir/install-sh -c"
1.23399 + break
1.23400 +- elif test -f $ac_dir/install.sh; then
1.23401 ++ elif test -f "$ac_dir/install.sh"; then
1.23402 + ac_aux_dir=$ac_dir
1.23403 + ac_install_sh="$ac_aux_dir/install.sh -c"
1.23404 + break
1.23405 +- elif test -f $ac_dir/shtool; then
1.23406 ++ elif test -f "$ac_dir/shtool"; then
1.23407 + ac_aux_dir=$ac_dir
1.23408 + ac_install_sh="$ac_aux_dir/shtool install -c"
1.23409 + break
1.23410 + fi
1.23411 + done
1.23412 + if test -z "$ac_aux_dir"; then
1.23413 +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5
1.23414 +-echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;}
1.23415 ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5
1.23416 ++echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;}
1.23417 + { (exit 1); exit 1; }; }
1.23418 + fi
1.23419 +-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
1.23420 +-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
1.23421 +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
1.23422 ++
1.23423 ++# These three variables are undocumented and unsupported,
1.23424 ++# and are intended to be withdrawn in a future Autoconf release.
1.23425 ++# They can cause serious problems if a builder's source tree is in a directory
1.23426 ++# whose full name contains unusual characters.
1.23427 ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
1.23428 ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
1.23429 ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
1.23430 ++
1.23431 +
1.23432 +
1.23433 +
1.23434 + # Make sure we can run config.sub.
1.23435 +-$ac_config_sub sun4 >/dev/null 2>&1 ||
1.23436 +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
1.23437 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
1.23438 ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
1.23439 ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
1.23440 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
1.23441 + { (exit 1); exit 1; }; }
1.23442 +
1.23443 +-echo "$as_me:$LINENO: checking build system type" >&5
1.23444 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6
1.23445 ++{ echo "$as_me:$LINENO: checking build system type" >&5
1.23446 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
1.23447 + if test "${ac_cv_build+set}" = set; then
1.23448 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.23449 + else
1.23450 +- ac_cv_build_alias=$build_alias
1.23451 +-test -z "$ac_cv_build_alias" &&
1.23452 +- ac_cv_build_alias=`$ac_config_guess`
1.23453 +-test -z "$ac_cv_build_alias" &&
1.23454 ++ ac_build_alias=$build_alias
1.23455 ++test "x$ac_build_alias" = x &&
1.23456 ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
1.23457 ++test "x$ac_build_alias" = x &&
1.23458 + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
1.23459 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
1.23460 + { (exit 1); exit 1; }; }
1.23461 +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
1.23462 +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
1.23463 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
1.23464 ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
1.23465 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
1.23466 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
1.23467 + { (exit 1); exit 1; }; }
1.23468 +
1.23469 + fi
1.23470 +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1.23471 +-echo "${ECHO_T}$ac_cv_build" >&6
1.23472 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1.23473 ++echo "${ECHO_T}$ac_cv_build" >&6; }
1.23474 ++case $ac_cv_build in
1.23475 ++*-*-*) ;;
1.23476 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
1.23477 ++echo "$as_me: error: invalid value of canonical build" >&2;}
1.23478 ++ { (exit 1); exit 1; }; };;
1.23479 ++esac
1.23480 + build=$ac_cv_build
1.23481 +-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1.23482 +-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1.23483 +-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1.23484 ++ac_save_IFS=$IFS; IFS='-'
1.23485 ++set x $ac_cv_build
1.23486 ++shift
1.23487 ++build_cpu=$1
1.23488 ++build_vendor=$2
1.23489 ++shift; shift
1.23490 ++# Remember, the first character of IFS is used to create $*,
1.23491 ++# except with old shells:
1.23492 ++build_os=$*
1.23493 ++IFS=$ac_save_IFS
1.23494 ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
1.23495 +
1.23496 +
1.23497 + am__api_version="1.9"
1.23498 +@@ -1593,8 +2077,8 @@
1.23499 + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1.23500 + # OS/2's system install, which has a completely different semantic
1.23501 + # ./install, which can be erroneously created by make from ./install.sh.
1.23502 +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.23503 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
1.23504 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.23505 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
1.23506 + if test -z "$INSTALL"; then
1.23507 + if test "${ac_cv_path_install+set}" = set; then
1.23508 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.23509 +@@ -1616,7 +2100,7 @@
1.23510 + # by default.
1.23511 + for ac_prog in ginstall scoinst install; do
1.23512 + for ac_exec_ext in '' $ac_executable_extensions; do
1.23513 +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
1.23514 ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
1.23515 + if test $ac_prog = install &&
1.23516 + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.23517 + # AIX install. It has an incompatible calling convention.
1.23518 +@@ -1635,21 +2119,22 @@
1.23519 + ;;
1.23520 + esac
1.23521 + done
1.23522 ++IFS=$as_save_IFS
1.23523 +
1.23524 +
1.23525 + fi
1.23526 + if test "${ac_cv_path_install+set}" = set; then
1.23527 + INSTALL=$ac_cv_path_install
1.23528 + else
1.23529 +- # As a last resort, use the slow shell script. We don't cache a
1.23530 +- # path for INSTALL within a source directory, because that will
1.23531 ++ # As a last resort, use the slow shell script. Don't cache a
1.23532 ++ # value for INSTALL within a source directory, because that will
1.23533 + # break other packages using the cache if that directory is
1.23534 +- # removed, or if the path is relative.
1.23535 ++ # removed, or if the value is a relative name.
1.23536 + INSTALL=$ac_install_sh
1.23537 + fi
1.23538 + fi
1.23539 +-echo "$as_me:$LINENO: result: $INSTALL" >&5
1.23540 +-echo "${ECHO_T}$INSTALL" >&6
1.23541 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
1.23542 ++echo "${ECHO_T}$INSTALL" >&6; }
1.23543 +
1.23544 + # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1.23545 + # It thinks the first close brace ends the variable substitution.
1.23546 +@@ -1659,8 +2144,8 @@
1.23547 +
1.23548 + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1.23549 +
1.23550 +-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
1.23551 +-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
1.23552 ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
1.23553 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
1.23554 + # Just in case
1.23555 + sleep 1
1.23556 + echo timestamp > conftest.file
1.23557 +@@ -1702,20 +2187,20 @@
1.23558 + Check your system clock" >&2;}
1.23559 + { (exit 1); exit 1; }; }
1.23560 + fi
1.23561 +-echo "$as_me:$LINENO: result: yes" >&5
1.23562 +-echo "${ECHO_T}yes" >&6
1.23563 ++{ echo "$as_me:$LINENO: result: yes" >&5
1.23564 ++echo "${ECHO_T}yes" >&6; }
1.23565 + test "$program_prefix" != NONE &&
1.23566 +- program_transform_name="s,^,$program_prefix,;$program_transform_name"
1.23567 ++ program_transform_name="s&^&$program_prefix&;$program_transform_name"
1.23568 + # Use a double $ so make ignores it.
1.23569 + test "$program_suffix" != NONE &&
1.23570 +- program_transform_name="s,\$,$program_suffix,;$program_transform_name"
1.23571 ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
1.23572 + # Double any \ or $. echo might interpret backslashes.
1.23573 + # By default was `s,x,x', remove it if useless.
1.23574 + cat <<\_ACEOF >conftest.sed
1.23575 + s/[\\$]/&&/g;s/;s,x,x,$//
1.23576 + _ACEOF
1.23577 + program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
1.23578 +-rm conftest.sed
1.23579 ++rm -f conftest.sed
1.23580 +
1.23581 + # expand $ac_aux_dir to an absolute path
1.23582 + am_aux_dir=`cd $ac_aux_dir && pwd`
1.23583 +@@ -1767,8 +2252,8 @@
1.23584 + do
1.23585 + # Extract the first word of "$ac_prog", so it can be a program name with args.
1.23586 + set dummy $ac_prog; ac_word=$2
1.23587 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.23588 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.23589 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.23590 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.23591 + if test "${ac_cv_prog_AWK+set}" = set; then
1.23592 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.23593 + else
1.23594 +@@ -1781,54 +2266,57 @@
1.23595 + IFS=$as_save_IFS
1.23596 + test -z "$as_dir" && as_dir=.
1.23597 + for ac_exec_ext in '' $ac_executable_extensions; do
1.23598 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.23599 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.23600 + ac_cv_prog_AWK="$ac_prog"
1.23601 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.23602 + break 2
1.23603 + fi
1.23604 + done
1.23605 + done
1.23606 ++IFS=$as_save_IFS
1.23607 +
1.23608 + fi
1.23609 + fi
1.23610 + AWK=$ac_cv_prog_AWK
1.23611 + if test -n "$AWK"; then
1.23612 +- echo "$as_me:$LINENO: result: $AWK" >&5
1.23613 +-echo "${ECHO_T}$AWK" >&6
1.23614 ++ { echo "$as_me:$LINENO: result: $AWK" >&5
1.23615 ++echo "${ECHO_T}$AWK" >&6; }
1.23616 + else
1.23617 +- echo "$as_me:$LINENO: result: no" >&5
1.23618 +-echo "${ECHO_T}no" >&6
1.23619 ++ { echo "$as_me:$LINENO: result: no" >&5
1.23620 ++echo "${ECHO_T}no" >&6; }
1.23621 + fi
1.23622 +
1.23623 ++
1.23624 + test -n "$AWK" && break
1.23625 + done
1.23626 +
1.23627 +-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
1.23628 +-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
1.23629 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
1.23630 +-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
1.23631 ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
1.23632 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
1.23633 ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
1.23634 ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
1.23635 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.23636 + else
1.23637 + cat >conftest.make <<\_ACEOF
1.23638 ++SHELL = /bin/sh
1.23639 + all:
1.23640 +- @echo 'ac_maketemp="$(MAKE)"'
1.23641 ++ @echo '@@@%%%=$(MAKE)=@@@%%%'
1.23642 + _ACEOF
1.23643 + # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
1.23644 +-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
1.23645 +-if test -n "$ac_maketemp"; then
1.23646 +- eval ac_cv_prog_make_${ac_make}_set=yes
1.23647 +-else
1.23648 +- eval ac_cv_prog_make_${ac_make}_set=no
1.23649 +-fi
1.23650 ++case `${MAKE-make} -f conftest.make 2>/dev/null` in
1.23651 ++ *@@@%%%=?*=@@@%%%*)
1.23652 ++ eval ac_cv_prog_make_${ac_make}_set=yes;;
1.23653 ++ *)
1.23654 ++ eval ac_cv_prog_make_${ac_make}_set=no;;
1.23655 ++esac
1.23656 + rm -f conftest.make
1.23657 + fi
1.23658 +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
1.23659 +- echo "$as_me:$LINENO: result: yes" >&5
1.23660 +-echo "${ECHO_T}yes" >&6
1.23661 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
1.23662 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.23663 ++echo "${ECHO_T}yes" >&6; }
1.23664 + SET_MAKE=
1.23665 + else
1.23666 +- echo "$as_me:$LINENO: result: no" >&5
1.23667 +-echo "${ECHO_T}no" >&6
1.23668 ++ { echo "$as_me:$LINENO: result: no" >&5
1.23669 ++echo "${ECHO_T}no" >&6; }
1.23670 + SET_MAKE="MAKE=${MAKE-make}"
1.23671 + fi
1.23672 +
1.23673 +@@ -1843,7 +2331,7 @@
1.23674 +
1.23675 + DEPDIR="${am__leading_dot}deps"
1.23676 +
1.23677 +- ac_config_commands="$ac_config_commands depfiles"
1.23678 ++ac_config_commands="$ac_config_commands depfiles"
1.23679 +
1.23680 +
1.23681 + am_make=${MAKE-make}
1.23682 +@@ -1853,8 +2341,8 @@
1.23683 + .PHONY: am__doit
1.23684 + END
1.23685 + # If we don't find an include directive, just comment out the code.
1.23686 +-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
1.23687 +-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
1.23688 ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
1.23689 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
1.23690 + am__include="#"
1.23691 + am__quote=
1.23692 + _am_result=none
1.23693 +@@ -1881,15 +2369,15 @@
1.23694 + fi
1.23695 +
1.23696 +
1.23697 +-echo "$as_me:$LINENO: result: $_am_result" >&5
1.23698 +-echo "${ECHO_T}$_am_result" >&6
1.23699 ++{ echo "$as_me:$LINENO: result: $_am_result" >&5
1.23700 ++echo "${ECHO_T}$_am_result" >&6; }
1.23701 + rm -f confinc confmf
1.23702 +
1.23703 +-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
1.23704 ++# Check whether --enable-dependency-tracking was given.
1.23705 + if test "${enable_dependency_tracking+set}" = set; then
1.23706 +- enableval="$enable_dependency_tracking"
1.23707 ++ enableval=$enable_dependency_tracking;
1.23708 ++fi
1.23709 +
1.23710 +-fi;
1.23711 + if test "x$enable_dependency_tracking" != xno; then
1.23712 + am_depcomp="$ac_aux_dir/depcomp"
1.23713 + AMDEPBACKSLASH='\'
1.23714 +@@ -1907,10 +2395,9 @@
1.23715 +
1.23716 +
1.23717 +
1.23718 +-# Check whether --enable-multilib or --disable-multilib was given.
1.23719 ++# Check whether --enable-multilib was given.
1.23720 + if test "${enable_multilib+set}" = set; then
1.23721 +- enableval="$enable_multilib"
1.23722 +- case "${enableval}" in
1.23723 ++ enableval=$enable_multilib; case "${enableval}" in
1.23724 + yes) multilib=yes ;;
1.23725 + no) multilib=no ;;
1.23726 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
1.23727 +@@ -1919,11 +2406,11 @@
1.23728 + esac
1.23729 + else
1.23730 + multilib=yes
1.23731 +-fi;
1.23732 +-# Check whether --enable-target-optspace or --disable-target-optspace was given.
1.23733 ++fi
1.23734 ++
1.23735 ++# Check whether --enable-target-optspace was given.
1.23736 + if test "${enable_target_optspace+set}" = set; then
1.23737 +- enableval="$enable_target_optspace"
1.23738 +- case "${enableval}" in
1.23739 ++ enableval=$enable_target_optspace; case "${enableval}" in
1.23740 + yes) target_optspace=yes ;;
1.23741 + no) target_optspace=no ;;
1.23742 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
1.23743 +@@ -1932,11 +2419,11 @@
1.23744 + esac
1.23745 + else
1.23746 + target_optspace=
1.23747 +-fi;
1.23748 +-# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
1.23749 ++fi
1.23750 ++
1.23751 ++# Check whether --enable-malloc-debugging was given.
1.23752 + if test "${enable_malloc_debugging+set}" = set; then
1.23753 +- enableval="$enable_malloc_debugging"
1.23754 +- case "${enableval}" in
1.23755 ++ enableval=$enable_malloc_debugging; case "${enableval}" in
1.23756 + yes) malloc_debugging=yes ;;
1.23757 + no) malloc_debugging=no ;;
1.23758 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
1.23759 +@@ -1945,11 +2432,11 @@
1.23760 + esac
1.23761 + else
1.23762 + malloc_debugging=
1.23763 +-fi;
1.23764 +-# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
1.23765 ++fi
1.23766 ++
1.23767 ++# Check whether --enable-newlib-multithread was given.
1.23768 + if test "${enable_newlib_multithread+set}" = set; then
1.23769 +- enableval="$enable_newlib_multithread"
1.23770 +- case "${enableval}" in
1.23771 ++ enableval=$enable_newlib_multithread; case "${enableval}" in
1.23772 + yes) newlib_multithread=yes ;;
1.23773 + no) newlib_multithread=no ;;
1.23774 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
1.23775 +@@ -1958,11 +2445,11 @@
1.23776 + esac
1.23777 + else
1.23778 + newlib_multithread=yes
1.23779 +-fi;
1.23780 +-# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given.
1.23781 ++fi
1.23782 ++
1.23783 ++# Check whether --enable-newlib-iconv was given.
1.23784 + if test "${enable_newlib_iconv+set}" = set; then
1.23785 +- enableval="$enable_newlib_iconv"
1.23786 +- if test "${newlib_iconv+set}" != set; then
1.23787 ++ enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
1.23788 + case "${enableval}" in
1.23789 + yes) newlib_iconv=yes ;;
1.23790 + no) newlib_iconv=no ;;
1.23791 +@@ -1973,11 +2460,11 @@
1.23792 + fi
1.23793 + else
1.23794 + newlib_iconv=${newlib_iconv}
1.23795 +-fi;
1.23796 +-# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
1.23797 ++fi
1.23798 ++
1.23799 ++# Check whether --enable-newlib-elix-level was given.
1.23800 + if test "${enable_newlib_elix_level+set}" = set; then
1.23801 +- enableval="$enable_newlib_elix_level"
1.23802 +- case "${enableval}" in
1.23803 ++ enableval=$enable_newlib_elix_level; case "${enableval}" in
1.23804 + 0) newlib_elix_level=0 ;;
1.23805 + 1) newlib_elix_level=1 ;;
1.23806 + 2) newlib_elix_level=2 ;;
1.23807 +@@ -1989,11 +2476,11 @@
1.23808 + esac
1.23809 + else
1.23810 + newlib_elix_level=0
1.23811 +-fi;
1.23812 +-# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
1.23813 ++fi
1.23814 ++
1.23815 ++# Check whether --enable-newlib-io-float was given.
1.23816 + if test "${enable_newlib_io_float+set}" = set; then
1.23817 +- enableval="$enable_newlib_io_float"
1.23818 +- case "${enableval}" in
1.23819 ++ enableval=$enable_newlib_io_float; case "${enableval}" in
1.23820 + yes) newlib_io_float=yes ;;
1.23821 + no) newlib_io_float=no ;;
1.23822 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
1.23823 +@@ -2002,11 +2489,11 @@
1.23824 + esac
1.23825 + else
1.23826 + newlib_io_float=yes
1.23827 +-fi;
1.23828 +-# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
1.23829 ++fi
1.23830 ++
1.23831 ++# Check whether --enable-newlib-supplied-syscalls was given.
1.23832 + if test "${enable_newlib_supplied_syscalls+set}" = set; then
1.23833 +- enableval="$enable_newlib_supplied_syscalls"
1.23834 +- case "${enableval}" in
1.23835 ++ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
1.23836 + yes) newlib_may_supply_syscalls=yes ;;
1.23837 + no) newlib_may_supply_syscalls=no ;;
1.23838 + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
1.23839 +@@ -2015,7 +2502,8 @@
1.23840 + esac
1.23841 + else
1.23842 + newlib_may_supply_syscalls=yes
1.23843 +-fi;
1.23844 ++fi
1.23845 ++
1.23846 +
1.23847 +
1.23848 + if test x${newlib_may_supply_syscalls} = xyes; then
1.23849 +@@ -2041,26 +2529,41 @@
1.23850 + fi
1.23851 +
1.23852 +
1.23853 +-echo "$as_me:$LINENO: checking host system type" >&5
1.23854 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6
1.23855 ++{ echo "$as_me:$LINENO: checking host system type" >&5
1.23856 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
1.23857 + if test "${ac_cv_host+set}" = set; then
1.23858 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.23859 + else
1.23860 +- ac_cv_host_alias=$host_alias
1.23861 +-test -z "$ac_cv_host_alias" &&
1.23862 +- ac_cv_host_alias=$ac_cv_build_alias
1.23863 +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
1.23864 +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
1.23865 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
1.23866 ++ if test "x$host_alias" = x; then
1.23867 ++ ac_cv_host=$ac_cv_build
1.23868 ++else
1.23869 ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
1.23870 ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
1.23871 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
1.23872 + { (exit 1); exit 1; }; }
1.23873 ++fi
1.23874 +
1.23875 + fi
1.23876 +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1.23877 +-echo "${ECHO_T}$ac_cv_host" >&6
1.23878 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1.23879 ++echo "${ECHO_T}$ac_cv_host" >&6; }
1.23880 ++case $ac_cv_host in
1.23881 ++*-*-*) ;;
1.23882 ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
1.23883 ++echo "$as_me: error: invalid value of canonical host" >&2;}
1.23884 ++ { (exit 1); exit 1; }; };;
1.23885 ++esac
1.23886 + host=$ac_cv_host
1.23887 +-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1.23888 +-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1.23889 +-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1.23890 ++ac_save_IFS=$IFS; IFS='-'
1.23891 ++set x $ac_cv_host
1.23892 ++shift
1.23893 ++host_cpu=$1
1.23894 ++host_vendor=$2
1.23895 ++shift; shift
1.23896 ++# Remember, the first character of IFS is used to create $*,
1.23897 ++# except with old shells:
1.23898 ++host_os=$*
1.23899 ++IFS=$ac_save_IFS
1.23900 ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
1.23901 +
1.23902 +
1.23903 +
1.23904 +@@ -2113,8 +2616,8 @@
1.23905 + if test -n "$ac_tool_prefix"; then
1.23906 + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
1.23907 + set dummy ${ac_tool_prefix}strip; ac_word=$2
1.23908 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.23909 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.23910 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.23911 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.23912 + if test "${ac_cv_prog_STRIP+set}" = set; then
1.23913 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.23914 + else
1.23915 +@@ -2127,32 +2630,34 @@
1.23916 + IFS=$as_save_IFS
1.23917 + test -z "$as_dir" && as_dir=.
1.23918 + for ac_exec_ext in '' $ac_executable_extensions; do
1.23919 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.23920 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.23921 + ac_cv_prog_STRIP="${ac_tool_prefix}strip"
1.23922 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.23923 + break 2
1.23924 + fi
1.23925 + done
1.23926 + done
1.23927 ++IFS=$as_save_IFS
1.23928 +
1.23929 + fi
1.23930 + fi
1.23931 + STRIP=$ac_cv_prog_STRIP
1.23932 + if test -n "$STRIP"; then
1.23933 +- echo "$as_me:$LINENO: result: $STRIP" >&5
1.23934 +-echo "${ECHO_T}$STRIP" >&6
1.23935 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5
1.23936 ++echo "${ECHO_T}$STRIP" >&6; }
1.23937 + else
1.23938 +- echo "$as_me:$LINENO: result: no" >&5
1.23939 +-echo "${ECHO_T}no" >&6
1.23940 ++ { echo "$as_me:$LINENO: result: no" >&5
1.23941 ++echo "${ECHO_T}no" >&6; }
1.23942 + fi
1.23943 +
1.23944 ++
1.23945 + fi
1.23946 + if test -z "$ac_cv_prog_STRIP"; then
1.23947 + ac_ct_STRIP=$STRIP
1.23948 + # Extract the first word of "strip", so it can be a program name with args.
1.23949 + set dummy strip; ac_word=$2
1.23950 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.23951 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.23952 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.23953 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.23954 + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
1.23955 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.23956 + else
1.23957 +@@ -2165,27 +2670,41 @@
1.23958 + IFS=$as_save_IFS
1.23959 + test -z "$as_dir" && as_dir=.
1.23960 + for ac_exec_ext in '' $ac_executable_extensions; do
1.23961 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.23962 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.23963 + ac_cv_prog_ac_ct_STRIP="strip"
1.23964 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.23965 + break 2
1.23966 + fi
1.23967 + done
1.23968 + done
1.23969 ++IFS=$as_save_IFS
1.23970 +
1.23971 +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
1.23972 + fi
1.23973 + fi
1.23974 + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
1.23975 + if test -n "$ac_ct_STRIP"; then
1.23976 +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
1.23977 +-echo "${ECHO_T}$ac_ct_STRIP" >&6
1.23978 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
1.23979 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; }
1.23980 + else
1.23981 +- echo "$as_me:$LINENO: result: no" >&5
1.23982 +-echo "${ECHO_T}no" >&6
1.23983 ++ { echo "$as_me:$LINENO: result: no" >&5
1.23984 ++echo "${ECHO_T}no" >&6; }
1.23985 + fi
1.23986 +
1.23987 +- STRIP=$ac_ct_STRIP
1.23988 ++ if test "x$ac_ct_STRIP" = x; then
1.23989 ++ STRIP=":"
1.23990 ++ else
1.23991 ++ case $cross_compiling:$ac_tool_warned in
1.23992 ++yes:)
1.23993 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.23994 ++whose name does not start with the host triplet. If you think this
1.23995 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.23996 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.23997 ++whose name does not start with the host triplet. If you think this
1.23998 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.23999 ++ac_tool_warned=yes ;;
1.24000 ++esac
1.24001 ++ STRIP=$ac_ct_STRIP
1.24002 ++ fi
1.24003 + else
1.24004 + STRIP="$ac_cv_prog_STRIP"
1.24005 + fi
1.24006 +@@ -2220,8 +2739,8 @@
1.24007 +
1.24008 + # Extract the first word of "gcc", so it can be a program name with args.
1.24009 + set dummy gcc; ac_word=$2
1.24010 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24011 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24012 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24013 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24014 + if test "${ac_cv_prog_CC+set}" = set; then
1.24015 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24016 + else
1.24017 +@@ -2234,30 +2753,32 @@
1.24018 + IFS=$as_save_IFS
1.24019 + test -z "$as_dir" && as_dir=.
1.24020 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24021 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24022 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24023 + ac_cv_prog_CC="gcc"
1.24024 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24025 + break 2
1.24026 + fi
1.24027 + done
1.24028 + done
1.24029 ++IFS=$as_save_IFS
1.24030 +
1.24031 + fi
1.24032 + fi
1.24033 + CC=$ac_cv_prog_CC
1.24034 + if test -n "$CC"; then
1.24035 +- echo "$as_me:$LINENO: result: $CC" >&5
1.24036 +-echo "${ECHO_T}$CC" >&6
1.24037 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.24038 ++echo "${ECHO_T}$CC" >&6; }
1.24039 + else
1.24040 +- echo "$as_me:$LINENO: result: no" >&5
1.24041 +-echo "${ECHO_T}no" >&6
1.24042 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24043 ++echo "${ECHO_T}no" >&6; }
1.24044 + fi
1.24045 +
1.24046 +
1.24047 ++
1.24048 + depcc="$CC" am_compiler_list=
1.24049 +
1.24050 +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
1.24051 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
1.24052 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
1.24053 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
1.24054 + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
1.24055 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24056 + else
1.24057 +@@ -2346,8 +2867,8 @@
1.24058 + fi
1.24059 +
1.24060 + fi
1.24061 +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
1.24062 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
1.24063 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
1.24064 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
1.24065 + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
1.24066 +
1.24067 +
1.24068 +@@ -2366,8 +2887,8 @@
1.24069 + if test -z "$CC"; then
1.24070 + # Extract the first word of "cc", so it can be a program name with args.
1.24071 + set dummy cc; ac_word=$2
1.24072 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24073 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24074 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24075 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24076 + if test "${ac_cv_prog_CC+set}" = set; then
1.24077 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24078 + else
1.24079 +@@ -2381,7 +2902,7 @@
1.24080 + IFS=$as_save_IFS
1.24081 + test -z "$as_dir" && as_dir=.
1.24082 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24083 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24084 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24085 + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
1.24086 + ac_prog_rejected=yes
1.24087 + continue
1.24088 +@@ -2392,6 +2913,7 @@
1.24089 + fi
1.24090 + done
1.24091 + done
1.24092 ++IFS=$as_save_IFS
1.24093 +
1.24094 + if test $ac_prog_rejected = yes; then
1.24095 + # We found a bogon in the path, so make sure we never use it.
1.24096 +@@ -2409,20 +2931,21 @@
1.24097 + fi
1.24098 + CC=$ac_cv_prog_CC
1.24099 + if test -n "$CC"; then
1.24100 +- echo "$as_me:$LINENO: result: $CC" >&5
1.24101 +-echo "${ECHO_T}$CC" >&6
1.24102 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.24103 ++echo "${ECHO_T}$CC" >&6; }
1.24104 + else
1.24105 +- echo "$as_me:$LINENO: result: no" >&5
1.24106 +-echo "${ECHO_T}no" >&6
1.24107 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24108 ++echo "${ECHO_T}no" >&6; }
1.24109 + fi
1.24110 +
1.24111 ++
1.24112 + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
1.24113 + echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
1.24114 + { (exit 1); exit 1; }; }
1.24115 + fi
1.24116 +
1.24117 +-echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
1.24118 +-echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6
1.24119 ++{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
1.24120 ++echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; }
1.24121 + if test "${ac_cv_c_compiler_gnu+set}" = set; then
1.24122 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24123 + else
1.24124 +@@ -2442,8 +2965,8 @@
1.24125 + ac_cv_c_compiler_gnu=no
1.24126 + fi
1.24127 + fi
1.24128 +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
1.24129 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
1.24130 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
1.24131 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
1.24132 +
1.24133 + if test $ac_cv_c_compiler_gnu = yes; then
1.24134 + GCC=yes
1.24135 +@@ -2452,13 +2975,16 @@
1.24136 + CFLAGS=
1.24137 + ac_test_CFLAGS=${CFLAGS+set}
1.24138 + ac_save_CFLAGS=$CFLAGS
1.24139 +-CFLAGS="-g"
1.24140 +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
1.24141 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
1.24142 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
1.24143 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
1.24144 + if test "${ac_cv_prog_cc_g+set}" = set; then
1.24145 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24146 + else
1.24147 +- cat >conftest.$ac_ext <<_ACEOF
1.24148 ++ ac_save_c_werror_flag=$ac_c_werror_flag
1.24149 ++ ac_c_werror_flag=yes
1.24150 ++ ac_cv_prog_cc_g=no
1.24151 ++ CFLAGS="-g"
1.24152 ++ cat >conftest.$ac_ext <<_ACEOF
1.24153 + /* confdefs.h. */
1.24154 + _ACEOF
1.24155 + cat confdefs.h >>conftest.$ac_ext
1.24156 +@@ -2474,38 +3000,118 @@
1.24157 + }
1.24158 + _ACEOF
1.24159 + rm -f conftest.$ac_objext
1.24160 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.24161 +- (eval $ac_compile) 2>conftest.er1
1.24162 ++if { (ac_try="$ac_compile"
1.24163 ++case "(($ac_try" in
1.24164 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.24165 ++ *) ac_try_echo=$ac_try;;
1.24166 ++esac
1.24167 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.24168 ++ (eval "$ac_compile") 2>conftest.er1
1.24169 + ac_status=$?
1.24170 + grep -v '^ *+' conftest.er1 >conftest.err
1.24171 + rm -f conftest.er1
1.24172 + cat conftest.err >&5
1.24173 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.24174 +- (exit $ac_status); } &&
1.24175 +- { ac_try='test -z "$ac_c_werror_flag"
1.24176 +- || test ! -s conftest.err'
1.24177 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.24178 +- (eval $ac_try) 2>&5
1.24179 ++ (exit $ac_status); } && {
1.24180 ++ test -z "$ac_c_werror_flag" ||
1.24181 ++ test ! -s conftest.err
1.24182 ++ } && test -s conftest.$ac_objext; then
1.24183 ++ ac_cv_prog_cc_g=yes
1.24184 ++else
1.24185 ++ echo "$as_me: failed program was:" >&5
1.24186 ++sed 's/^/| /' conftest.$ac_ext >&5
1.24187 ++
1.24188 ++ CFLAGS=""
1.24189 ++ cat >conftest.$ac_ext <<_ACEOF
1.24190 ++/* confdefs.h. */
1.24191 ++_ACEOF
1.24192 ++cat confdefs.h >>conftest.$ac_ext
1.24193 ++cat >>conftest.$ac_ext <<_ACEOF
1.24194 ++/* end confdefs.h. */
1.24195 ++
1.24196 ++int
1.24197 ++main ()
1.24198 ++{
1.24199 ++
1.24200 ++ ;
1.24201 ++ return 0;
1.24202 ++}
1.24203 ++_ACEOF
1.24204 ++rm -f conftest.$ac_objext
1.24205 ++if { (ac_try="$ac_compile"
1.24206 ++case "(($ac_try" in
1.24207 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.24208 ++ *) ac_try_echo=$ac_try;;
1.24209 ++esac
1.24210 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.24211 ++ (eval "$ac_compile") 2>conftest.er1
1.24212 + ac_status=$?
1.24213 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.24214 ++ rm -f conftest.er1
1.24215 ++ cat conftest.err >&5
1.24216 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.24217 +- (exit $ac_status); }; } &&
1.24218 +- { ac_try='test -s conftest.$ac_objext'
1.24219 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.24220 +- (eval $ac_try) 2>&5
1.24221 ++ (exit $ac_status); } && {
1.24222 ++ test -z "$ac_c_werror_flag" ||
1.24223 ++ test ! -s conftest.err
1.24224 ++ } && test -s conftest.$ac_objext; then
1.24225 ++ :
1.24226 ++else
1.24227 ++ echo "$as_me: failed program was:" >&5
1.24228 ++sed 's/^/| /' conftest.$ac_ext >&5
1.24229 ++
1.24230 ++ ac_c_werror_flag=$ac_save_c_werror_flag
1.24231 ++ CFLAGS="-g"
1.24232 ++ cat >conftest.$ac_ext <<_ACEOF
1.24233 ++/* confdefs.h. */
1.24234 ++_ACEOF
1.24235 ++cat confdefs.h >>conftest.$ac_ext
1.24236 ++cat >>conftest.$ac_ext <<_ACEOF
1.24237 ++/* end confdefs.h. */
1.24238 ++
1.24239 ++int
1.24240 ++main ()
1.24241 ++{
1.24242 ++
1.24243 ++ ;
1.24244 ++ return 0;
1.24245 ++}
1.24246 ++_ACEOF
1.24247 ++rm -f conftest.$ac_objext
1.24248 ++if { (ac_try="$ac_compile"
1.24249 ++case "(($ac_try" in
1.24250 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.24251 ++ *) ac_try_echo=$ac_try;;
1.24252 ++esac
1.24253 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.24254 ++ (eval "$ac_compile") 2>conftest.er1
1.24255 + ac_status=$?
1.24256 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.24257 ++ rm -f conftest.er1
1.24258 ++ cat conftest.err >&5
1.24259 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.24260 +- (exit $ac_status); }; }; then
1.24261 ++ (exit $ac_status); } && {
1.24262 ++ test -z "$ac_c_werror_flag" ||
1.24263 ++ test ! -s conftest.err
1.24264 ++ } && test -s conftest.$ac_objext; then
1.24265 + ac_cv_prog_cc_g=yes
1.24266 + else
1.24267 + echo "$as_me: failed program was:" >&5
1.24268 + sed 's/^/| /' conftest.$ac_ext >&5
1.24269 +
1.24270 +-ac_cv_prog_cc_g=no
1.24271 ++
1.24272 ++fi
1.24273 ++
1.24274 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.24275 ++fi
1.24276 ++
1.24277 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.24278 + fi
1.24279 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.24280 ++
1.24281 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.24282 ++ ac_c_werror_flag=$ac_save_c_werror_flag
1.24283 + fi
1.24284 +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
1.24285 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
1.24286 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
1.24287 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
1.24288 + if test "$ac_test_CFLAGS" = set; then
1.24289 + CFLAGS=$ac_save_CFLAGS
1.24290 + elif test $ac_cv_prog_cc_g = yes; then
1.24291 +@@ -2537,8 +3143,8 @@
1.24292 + if test -n "$ac_tool_prefix"; then
1.24293 + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
1.24294 + set dummy ${ac_tool_prefix}as; ac_word=$2
1.24295 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24296 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24297 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24298 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24299 + if test "${ac_cv_prog_AS+set}" = set; then
1.24300 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24301 + else
1.24302 +@@ -2551,32 +3157,34 @@
1.24303 + IFS=$as_save_IFS
1.24304 + test -z "$as_dir" && as_dir=.
1.24305 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24306 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24307 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24308 + ac_cv_prog_AS="${ac_tool_prefix}as"
1.24309 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24310 + break 2
1.24311 + fi
1.24312 + done
1.24313 + done
1.24314 ++IFS=$as_save_IFS
1.24315 +
1.24316 + fi
1.24317 + fi
1.24318 + AS=$ac_cv_prog_AS
1.24319 + if test -n "$AS"; then
1.24320 +- echo "$as_me:$LINENO: result: $AS" >&5
1.24321 +-echo "${ECHO_T}$AS" >&6
1.24322 ++ { echo "$as_me:$LINENO: result: $AS" >&5
1.24323 ++echo "${ECHO_T}$AS" >&6; }
1.24324 + else
1.24325 +- echo "$as_me:$LINENO: result: no" >&5
1.24326 +-echo "${ECHO_T}no" >&6
1.24327 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24328 ++echo "${ECHO_T}no" >&6; }
1.24329 + fi
1.24330 +
1.24331 ++
1.24332 + fi
1.24333 + if test -z "$ac_cv_prog_AS"; then
1.24334 + ac_ct_AS=$AS
1.24335 + # Extract the first word of "as", so it can be a program name with args.
1.24336 + set dummy as; ac_word=$2
1.24337 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24338 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24339 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24340 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24341 + if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
1.24342 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24343 + else
1.24344 +@@ -2589,26 +3197,41 @@
1.24345 + IFS=$as_save_IFS
1.24346 + test -z "$as_dir" && as_dir=.
1.24347 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24348 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24349 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24350 + ac_cv_prog_ac_ct_AS="as"
1.24351 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24352 + break 2
1.24353 + fi
1.24354 + done
1.24355 + done
1.24356 ++IFS=$as_save_IFS
1.24357 +
1.24358 + fi
1.24359 + fi
1.24360 + ac_ct_AS=$ac_cv_prog_ac_ct_AS
1.24361 + if test -n "$ac_ct_AS"; then
1.24362 +- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.24363 +-echo "${ECHO_T}$ac_ct_AS" >&6
1.24364 ++ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.24365 ++echo "${ECHO_T}$ac_ct_AS" >&6; }
1.24366 + else
1.24367 +- echo "$as_me:$LINENO: result: no" >&5
1.24368 +-echo "${ECHO_T}no" >&6
1.24369 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24370 ++echo "${ECHO_T}no" >&6; }
1.24371 + fi
1.24372 +
1.24373 +- AS=$ac_ct_AS
1.24374 ++ if test "x$ac_ct_AS" = x; then
1.24375 ++ AS=""
1.24376 ++ else
1.24377 ++ case $cross_compiling:$ac_tool_warned in
1.24378 ++yes:)
1.24379 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.24380 ++whose name does not start with the host triplet. If you think this
1.24381 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.24382 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.24383 ++whose name does not start with the host triplet. If you think this
1.24384 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.24385 ++ac_tool_warned=yes ;;
1.24386 ++esac
1.24387 ++ AS=$ac_ct_AS
1.24388 ++ fi
1.24389 + else
1.24390 + AS="$ac_cv_prog_AS"
1.24391 + fi
1.24392 +@@ -2616,8 +3239,8 @@
1.24393 + if test -n "$ac_tool_prefix"; then
1.24394 + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
1.24395 + set dummy ${ac_tool_prefix}ar; ac_word=$2
1.24396 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24397 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24398 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24399 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24400 + if test "${ac_cv_prog_AR+set}" = set; then
1.24401 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24402 + else
1.24403 +@@ -2630,32 +3253,34 @@
1.24404 + IFS=$as_save_IFS
1.24405 + test -z "$as_dir" && as_dir=.
1.24406 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24407 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24408 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24409 + ac_cv_prog_AR="${ac_tool_prefix}ar"
1.24410 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24411 + break 2
1.24412 + fi
1.24413 + done
1.24414 + done
1.24415 ++IFS=$as_save_IFS
1.24416 +
1.24417 + fi
1.24418 + fi
1.24419 + AR=$ac_cv_prog_AR
1.24420 + if test -n "$AR"; then
1.24421 +- echo "$as_me:$LINENO: result: $AR" >&5
1.24422 +-echo "${ECHO_T}$AR" >&6
1.24423 ++ { echo "$as_me:$LINENO: result: $AR" >&5
1.24424 ++echo "${ECHO_T}$AR" >&6; }
1.24425 + else
1.24426 +- echo "$as_me:$LINENO: result: no" >&5
1.24427 +-echo "${ECHO_T}no" >&6
1.24428 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24429 ++echo "${ECHO_T}no" >&6; }
1.24430 + fi
1.24431 +
1.24432 ++
1.24433 + fi
1.24434 + if test -z "$ac_cv_prog_AR"; then
1.24435 + ac_ct_AR=$AR
1.24436 + # Extract the first word of "ar", so it can be a program name with args.
1.24437 + set dummy ar; ac_word=$2
1.24438 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24439 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24440 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24441 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24442 + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
1.24443 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24444 + else
1.24445 +@@ -2668,26 +3293,41 @@
1.24446 + IFS=$as_save_IFS
1.24447 + test -z "$as_dir" && as_dir=.
1.24448 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24449 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24450 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24451 + ac_cv_prog_ac_ct_AR="ar"
1.24452 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24453 + break 2
1.24454 + fi
1.24455 + done
1.24456 + done
1.24457 ++IFS=$as_save_IFS
1.24458 +
1.24459 + fi
1.24460 + fi
1.24461 + ac_ct_AR=$ac_cv_prog_ac_ct_AR
1.24462 + if test -n "$ac_ct_AR"; then
1.24463 +- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.24464 +-echo "${ECHO_T}$ac_ct_AR" >&6
1.24465 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.24466 ++echo "${ECHO_T}$ac_ct_AR" >&6; }
1.24467 + else
1.24468 +- echo "$as_me:$LINENO: result: no" >&5
1.24469 +-echo "${ECHO_T}no" >&6
1.24470 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24471 ++echo "${ECHO_T}no" >&6; }
1.24472 + fi
1.24473 +
1.24474 +- AR=$ac_ct_AR
1.24475 ++ if test "x$ac_ct_AR" = x; then
1.24476 ++ AR=""
1.24477 ++ else
1.24478 ++ case $cross_compiling:$ac_tool_warned in
1.24479 ++yes:)
1.24480 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.24481 ++whose name does not start with the host triplet. If you think this
1.24482 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.24483 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.24484 ++whose name does not start with the host triplet. If you think this
1.24485 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.24486 ++ac_tool_warned=yes ;;
1.24487 ++esac
1.24488 ++ AR=$ac_ct_AR
1.24489 ++ fi
1.24490 + else
1.24491 + AR="$ac_cv_prog_AR"
1.24492 + fi
1.24493 +@@ -2695,8 +3335,8 @@
1.24494 + if test -n "$ac_tool_prefix"; then
1.24495 + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
1.24496 + set dummy ${ac_tool_prefix}ranlib; ac_word=$2
1.24497 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24498 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24499 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24500 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24501 + if test "${ac_cv_prog_RANLIB+set}" = set; then
1.24502 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24503 + else
1.24504 +@@ -2709,32 +3349,34 @@
1.24505 + IFS=$as_save_IFS
1.24506 + test -z "$as_dir" && as_dir=.
1.24507 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24508 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24509 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24510 + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
1.24511 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24512 + break 2
1.24513 + fi
1.24514 + done
1.24515 + done
1.24516 ++IFS=$as_save_IFS
1.24517 +
1.24518 + fi
1.24519 + fi
1.24520 + RANLIB=$ac_cv_prog_RANLIB
1.24521 + if test -n "$RANLIB"; then
1.24522 +- echo "$as_me:$LINENO: result: $RANLIB" >&5
1.24523 +-echo "${ECHO_T}$RANLIB" >&6
1.24524 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5
1.24525 ++echo "${ECHO_T}$RANLIB" >&6; }
1.24526 + else
1.24527 +- echo "$as_me:$LINENO: result: no" >&5
1.24528 +-echo "${ECHO_T}no" >&6
1.24529 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24530 ++echo "${ECHO_T}no" >&6; }
1.24531 + fi
1.24532 +
1.24533 ++
1.24534 + fi
1.24535 + if test -z "$ac_cv_prog_RANLIB"; then
1.24536 + ac_ct_RANLIB=$RANLIB
1.24537 + # Extract the first word of "ranlib", so it can be a program name with args.
1.24538 + set dummy ranlib; ac_word=$2
1.24539 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24540 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24541 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24542 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24543 + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
1.24544 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24545 + else
1.24546 +@@ -2747,27 +3389,41 @@
1.24547 + IFS=$as_save_IFS
1.24548 + test -z "$as_dir" && as_dir=.
1.24549 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24550 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24551 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24552 + ac_cv_prog_ac_ct_RANLIB="ranlib"
1.24553 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24554 + break 2
1.24555 + fi
1.24556 + done
1.24557 + done
1.24558 ++IFS=$as_save_IFS
1.24559 +
1.24560 +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
1.24561 + fi
1.24562 + fi
1.24563 + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
1.24564 + if test -n "$ac_ct_RANLIB"; then
1.24565 +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.24566 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6
1.24567 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.24568 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
1.24569 + else
1.24570 +- echo "$as_me:$LINENO: result: no" >&5
1.24571 +-echo "${ECHO_T}no" >&6
1.24572 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24573 ++echo "${ECHO_T}no" >&6; }
1.24574 + fi
1.24575 +
1.24576 +- RANLIB=$ac_ct_RANLIB
1.24577 ++ if test "x$ac_ct_RANLIB" = x; then
1.24578 ++ RANLIB=":"
1.24579 ++ else
1.24580 ++ case $cross_compiling:$ac_tool_warned in
1.24581 ++yes:)
1.24582 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.24583 ++whose name does not start with the host triplet. If you think this
1.24584 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.24585 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.24586 ++whose name does not start with the host triplet. If you think this
1.24587 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.24588 ++ac_tool_warned=yes ;;
1.24589 ++esac
1.24590 ++ RANLIB=$ac_ct_RANLIB
1.24591 ++ fi
1.24592 + else
1.24593 + RANLIB="$ac_cv_prog_RANLIB"
1.24594 + fi
1.24595 +@@ -2775,8 +3431,8 @@
1.24596 + if test -n "$ac_tool_prefix"; then
1.24597 + # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args.
1.24598 + set dummy ${ac_tool_prefix}readelf; ac_word=$2
1.24599 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24600 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24601 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24602 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24603 + if test "${ac_cv_prog_READELF+set}" = set; then
1.24604 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24605 + else
1.24606 +@@ -2789,32 +3445,34 @@
1.24607 + IFS=$as_save_IFS
1.24608 + test -z "$as_dir" && as_dir=.
1.24609 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24610 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24611 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24612 + ac_cv_prog_READELF="${ac_tool_prefix}readelf"
1.24613 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24614 + break 2
1.24615 + fi
1.24616 + done
1.24617 + done
1.24618 ++IFS=$as_save_IFS
1.24619 +
1.24620 + fi
1.24621 + fi
1.24622 + READELF=$ac_cv_prog_READELF
1.24623 + if test -n "$READELF"; then
1.24624 +- echo "$as_me:$LINENO: result: $READELF" >&5
1.24625 +-echo "${ECHO_T}$READELF" >&6
1.24626 ++ { echo "$as_me:$LINENO: result: $READELF" >&5
1.24627 ++echo "${ECHO_T}$READELF" >&6; }
1.24628 + else
1.24629 +- echo "$as_me:$LINENO: result: no" >&5
1.24630 +-echo "${ECHO_T}no" >&6
1.24631 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24632 ++echo "${ECHO_T}no" >&6; }
1.24633 + fi
1.24634 +
1.24635 ++
1.24636 + fi
1.24637 + if test -z "$ac_cv_prog_READELF"; then
1.24638 + ac_ct_READELF=$READELF
1.24639 + # Extract the first word of "readelf", so it can be a program name with args.
1.24640 + set dummy readelf; ac_word=$2
1.24641 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24642 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24643 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24644 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24645 + if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then
1.24646 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24647 + else
1.24648 +@@ -2827,27 +3485,41 @@
1.24649 + IFS=$as_save_IFS
1.24650 + test -z "$as_dir" && as_dir=.
1.24651 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24652 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24653 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24654 + ac_cv_prog_ac_ct_READELF="readelf"
1.24655 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24656 + break 2
1.24657 + fi
1.24658 + done
1.24659 + done
1.24660 ++IFS=$as_save_IFS
1.24661 +
1.24662 +- test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":"
1.24663 + fi
1.24664 + fi
1.24665 + ac_ct_READELF=$ac_cv_prog_ac_ct_READELF
1.24666 + if test -n "$ac_ct_READELF"; then
1.24667 +- echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
1.24668 +-echo "${ECHO_T}$ac_ct_READELF" >&6
1.24669 ++ { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5
1.24670 ++echo "${ECHO_T}$ac_ct_READELF" >&6; }
1.24671 + else
1.24672 +- echo "$as_me:$LINENO: result: no" >&5
1.24673 +-echo "${ECHO_T}no" >&6
1.24674 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24675 ++echo "${ECHO_T}no" >&6; }
1.24676 + fi
1.24677 +
1.24678 +- READELF=$ac_ct_READELF
1.24679 ++ if test "x$ac_ct_READELF" = x; then
1.24680 ++ READELF=":"
1.24681 ++ else
1.24682 ++ case $cross_compiling:$ac_tool_warned in
1.24683 ++yes:)
1.24684 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.24685 ++whose name does not start with the host triplet. If you think this
1.24686 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.24687 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.24688 ++whose name does not start with the host triplet. If you think this
1.24689 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.24690 ++ac_tool_warned=yes ;;
1.24691 ++esac
1.24692 ++ READELF=$ac_ct_READELF
1.24693 ++ fi
1.24694 + else
1.24695 + READELF="$ac_cv_prog_READELF"
1.24696 + fi
1.24697 +@@ -2866,8 +3538,8 @@
1.24698 + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1.24699 + # OS/2's system install, which has a completely different semantic
1.24700 + # ./install, which can be erroneously created by make from ./install.sh.
1.24701 +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.24702 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
1.24703 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1.24704 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
1.24705 + if test -z "$INSTALL"; then
1.24706 + if test "${ac_cv_path_install+set}" = set; then
1.24707 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24708 +@@ -2889,7 +3561,7 @@
1.24709 + # by default.
1.24710 + for ac_prog in ginstall scoinst install; do
1.24711 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24712 +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
1.24713 ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
1.24714 + if test $ac_prog = install &&
1.24715 + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1.24716 + # AIX install. It has an incompatible calling convention.
1.24717 +@@ -2908,21 +3580,22 @@
1.24718 + ;;
1.24719 + esac
1.24720 + done
1.24721 ++IFS=$as_save_IFS
1.24722 +
1.24723 +
1.24724 + fi
1.24725 + if test "${ac_cv_path_install+set}" = set; then
1.24726 + INSTALL=$ac_cv_path_install
1.24727 + else
1.24728 +- # As a last resort, use the slow shell script. We don't cache a
1.24729 +- # path for INSTALL within a source directory, because that will
1.24730 ++ # As a last resort, use the slow shell script. Don't cache a
1.24731 ++ # value for INSTALL within a source directory, because that will
1.24732 + # break other packages using the cache if that directory is
1.24733 +- # removed, or if the path is relative.
1.24734 ++ # removed, or if the value is a relative name.
1.24735 + INSTALL=$ac_install_sh
1.24736 + fi
1.24737 + fi
1.24738 +-echo "$as_me:$LINENO: result: $INSTALL" >&5
1.24739 +-echo "${ECHO_T}$INSTALL" >&6
1.24740 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5
1.24741 ++echo "${ECHO_T}$INSTALL" >&6; }
1.24742 +
1.24743 + # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1.24744 + # It thinks the first close brace ends the variable substitution.
1.24745 +@@ -2936,17 +3609,17 @@
1.24746 + # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */
1.24747 + ac_given_INSTALL=$INSTALL
1.24748 +
1.24749 +-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
1.24750 +-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
1.24751 +- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
1.24752 ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
1.24753 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
1.24754 ++ # Check whether --enable-maintainer-mode was given.
1.24755 + if test "${enable_maintainer_mode+set}" = set; then
1.24756 +- enableval="$enable_maintainer_mode"
1.24757 +- USE_MAINTAINER_MODE=$enableval
1.24758 ++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
1.24759 + else
1.24760 + USE_MAINTAINER_MODE=no
1.24761 +-fi;
1.24762 +- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
1.24763 +-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
1.24764 ++fi
1.24765 ++
1.24766 ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
1.24767 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
1.24768 +
1.24769 +
1.24770 + if test $USE_MAINTAINER_MODE = yes; then
1.24771 +@@ -3066,64 +3739,89 @@
1.24772 +
1.24773 +
1.24774 +
1.24775 +-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
1.24776 +-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
1.24777 +-if test "${lt_cv_path_SED+set}" = set; then
1.24778 ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
1.24779 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
1.24780 ++if test "${ac_cv_path_SED+set}" = set; then
1.24781 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.24782 ++else
1.24783 ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
1.24784 ++ for ac_i in 1 2 3 4 5 6 7; do
1.24785 ++ ac_script="$ac_script$as_nl$ac_script"
1.24786 ++ done
1.24787 ++ echo "$ac_script" | sed 99q >conftest.sed
1.24788 ++ $as_unset ac_script || ac_script=
1.24789 ++ # Extract the first word of "sed gsed" to use in msg output
1.24790 ++if test -z "$SED"; then
1.24791 ++set dummy sed gsed; ac_prog_name=$2
1.24792 ++if test "${ac_cv_path_SED+set}" = set; then
1.24793 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24794 + else
1.24795 +- # Loop through the user's path and test for sed and gsed.
1.24796 +-# Then use that list of sed's as ones to test for truncation.
1.24797 ++ ac_path_SED_found=false
1.24798 ++# Loop through the user's path and test for each of PROGNAME-LIST
1.24799 + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.24800 + for as_dir in $PATH
1.24801 + do
1.24802 + IFS=$as_save_IFS
1.24803 + test -z "$as_dir" && as_dir=.
1.24804 +- for lt_ac_prog in sed gsed; do
1.24805 +- for ac_exec_ext in '' $ac_executable_extensions; do
1.24806 +- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
1.24807 +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
1.24808 +- fi
1.24809 +- done
1.24810 +- done
1.24811 +-done
1.24812 +-IFS=$as_save_IFS
1.24813 +-lt_ac_max=0
1.24814 +-lt_ac_count=0
1.24815 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
1.24816 +-# along with /bin/sed that truncates output.
1.24817 +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
1.24818 +- test ! -f $lt_ac_sed && continue
1.24819 +- cat /dev/null > conftest.in
1.24820 +- lt_ac_count=0
1.24821 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
1.24822 +- # Check for GNU sed and select it if it is found.
1.24823 +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
1.24824 +- lt_cv_path_SED=$lt_ac_sed
1.24825 +- break
1.24826 +- fi
1.24827 +- while true; do
1.24828 +- cat conftest.in conftest.in >conftest.tmp
1.24829 +- mv conftest.tmp conftest.in
1.24830 +- cp conftest.in conftest.nl
1.24831 +- echo >>conftest.nl
1.24832 +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
1.24833 +- cmp -s conftest.out conftest.nl || break
1.24834 +- # 10000 chars as input seems more than enough
1.24835 +- test $lt_ac_count -gt 10 && break
1.24836 +- lt_ac_count=`expr $lt_ac_count + 1`
1.24837 +- if test $lt_ac_count -gt $lt_ac_max; then
1.24838 +- lt_ac_max=$lt_ac_count
1.24839 +- lt_cv_path_SED=$lt_ac_sed
1.24840 ++ for ac_prog in sed gsed; do
1.24841 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.24842 ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
1.24843 ++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
1.24844 ++ # Check for GNU ac_path_SED and select it if it is found.
1.24845 ++ # Check for GNU $ac_path_SED
1.24846 ++case `"$ac_path_SED" --version 2>&1` in
1.24847 ++*GNU*)
1.24848 ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
1.24849 ++*)
1.24850 ++ ac_count=0
1.24851 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
1.24852 ++ while :
1.24853 ++ do
1.24854 ++ cat "conftest.in" "conftest.in" >"conftest.tmp"
1.24855 ++ mv "conftest.tmp" "conftest.in"
1.24856 ++ cp "conftest.in" "conftest.nl"
1.24857 ++ echo '' >> "conftest.nl"
1.24858 ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
1.24859 ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
1.24860 ++ ac_count=`expr $ac_count + 1`
1.24861 ++ if test $ac_count -gt ${ac_path_SED_max-0}; then
1.24862 ++ # Best one so far, save it but keep looking for a better one
1.24863 ++ ac_cv_path_SED="$ac_path_SED"
1.24864 ++ ac_path_SED_max=$ac_count
1.24865 + fi
1.24866 ++ # 10*(2^10) chars as input seems more than enough
1.24867 ++ test $ac_count -gt 10 && break
1.24868 ++ done
1.24869 ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
1.24870 ++esac
1.24871 ++
1.24872 ++
1.24873 ++ $ac_path_SED_found && break 3
1.24874 + done
1.24875 + done
1.24876 +
1.24877 ++done
1.24878 ++IFS=$as_save_IFS
1.24879 ++
1.24880 ++
1.24881 ++fi
1.24882 ++
1.24883 ++SED="$ac_cv_path_SED"
1.24884 ++if test -z "$SED"; then
1.24885 ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
1.24886 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
1.24887 ++ { (exit 1); exit 1; }; }
1.24888 + fi
1.24889 +
1.24890 +-SED=$lt_cv_path_SED
1.24891 ++else
1.24892 ++ ac_cv_path_SED=$SED
1.24893 ++fi
1.24894 +
1.24895 +-echo "$as_me:$LINENO: result: $SED" >&5
1.24896 +-echo "${ECHO_T}$SED" >&6
1.24897 ++fi
1.24898 ++{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
1.24899 ++echo "${ECHO_T}$ac_cv_path_SED" >&6; }
1.24900 ++ SED="$ac_cv_path_SED"
1.24901 ++ rm -f conftest.sed
1.24902 +
1.24903 + test -z "$SED" && SED=sed
1.24904 + Xsed="$SED -e 1s/^X//"
1.24905 +@@ -3146,8 +3844,8 @@
1.24906 + if test -n "$ac_tool_prefix"; then
1.24907 + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
1.24908 + set dummy ${ac_tool_prefix}as; ac_word=$2
1.24909 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24910 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24911 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24912 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24913 + if test "${ac_cv_prog_AS+set}" = set; then
1.24914 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24915 + else
1.24916 +@@ -3160,32 +3858,34 @@
1.24917 + IFS=$as_save_IFS
1.24918 + test -z "$as_dir" && as_dir=.
1.24919 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24920 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24921 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24922 + ac_cv_prog_AS="${ac_tool_prefix}as"
1.24923 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24924 + break 2
1.24925 + fi
1.24926 + done
1.24927 + done
1.24928 ++IFS=$as_save_IFS
1.24929 +
1.24930 + fi
1.24931 + fi
1.24932 + AS=$ac_cv_prog_AS
1.24933 + if test -n "$AS"; then
1.24934 +- echo "$as_me:$LINENO: result: $AS" >&5
1.24935 +-echo "${ECHO_T}$AS" >&6
1.24936 ++ { echo "$as_me:$LINENO: result: $AS" >&5
1.24937 ++echo "${ECHO_T}$AS" >&6; }
1.24938 + else
1.24939 +- echo "$as_me:$LINENO: result: no" >&5
1.24940 +-echo "${ECHO_T}no" >&6
1.24941 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24942 ++echo "${ECHO_T}no" >&6; }
1.24943 + fi
1.24944 +
1.24945 ++
1.24946 + fi
1.24947 + if test -z "$ac_cv_prog_AS"; then
1.24948 + ac_ct_AS=$AS
1.24949 + # Extract the first word of "as", so it can be a program name with args.
1.24950 + set dummy as; ac_word=$2
1.24951 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24952 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.24953 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.24954 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.24955 + if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
1.24956 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.24957 + else
1.24958 +@@ -3198,27 +3898,41 @@
1.24959 + IFS=$as_save_IFS
1.24960 + test -z "$as_dir" && as_dir=.
1.24961 + for ac_exec_ext in '' $ac_executable_extensions; do
1.24962 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.24963 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.24964 + ac_cv_prog_ac_ct_AS="as"
1.24965 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.24966 + break 2
1.24967 + fi
1.24968 + done
1.24969 + done
1.24970 ++IFS=$as_save_IFS
1.24971 +
1.24972 +- test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false"
1.24973 + fi
1.24974 + fi
1.24975 + ac_ct_AS=$ac_cv_prog_ac_ct_AS
1.24976 + if test -n "$ac_ct_AS"; then
1.24977 +- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.24978 +-echo "${ECHO_T}$ac_ct_AS" >&6
1.24979 ++ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
1.24980 ++echo "${ECHO_T}$ac_ct_AS" >&6; }
1.24981 + else
1.24982 +- echo "$as_me:$LINENO: result: no" >&5
1.24983 +-echo "${ECHO_T}no" >&6
1.24984 ++ { echo "$as_me:$LINENO: result: no" >&5
1.24985 ++echo "${ECHO_T}no" >&6; }
1.24986 + fi
1.24987 +
1.24988 +- AS=$ac_ct_AS
1.24989 ++ if test "x$ac_ct_AS" = x; then
1.24990 ++ AS="false"
1.24991 ++ else
1.24992 ++ case $cross_compiling:$ac_tool_warned in
1.24993 ++yes:)
1.24994 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.24995 ++whose name does not start with the host triplet. If you think this
1.24996 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.24997 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.24998 ++whose name does not start with the host triplet. If you think this
1.24999 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.25000 ++ac_tool_warned=yes ;;
1.25001 ++esac
1.25002 ++ AS=$ac_ct_AS
1.25003 ++ fi
1.25004 + else
1.25005 + AS="$ac_cv_prog_AS"
1.25006 + fi
1.25007 +@@ -3226,8 +3940,8 @@
1.25008 + if test -n "$ac_tool_prefix"; then
1.25009 + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
1.25010 + set dummy ${ac_tool_prefix}dlltool; ac_word=$2
1.25011 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25012 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25013 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25014 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25015 + if test "${ac_cv_prog_DLLTOOL+set}" = set; then
1.25016 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25017 + else
1.25018 +@@ -3240,32 +3954,34 @@
1.25019 + IFS=$as_save_IFS
1.25020 + test -z "$as_dir" && as_dir=.
1.25021 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25022 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25023 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25024 + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
1.25025 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25026 + break 2
1.25027 + fi
1.25028 + done
1.25029 + done
1.25030 ++IFS=$as_save_IFS
1.25031 +
1.25032 + fi
1.25033 + fi
1.25034 + DLLTOOL=$ac_cv_prog_DLLTOOL
1.25035 + if test -n "$DLLTOOL"; then
1.25036 +- echo "$as_me:$LINENO: result: $DLLTOOL" >&5
1.25037 +-echo "${ECHO_T}$DLLTOOL" >&6
1.25038 ++ { echo "$as_me:$LINENO: result: $DLLTOOL" >&5
1.25039 ++echo "${ECHO_T}$DLLTOOL" >&6; }
1.25040 + else
1.25041 +- echo "$as_me:$LINENO: result: no" >&5
1.25042 +-echo "${ECHO_T}no" >&6
1.25043 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25044 ++echo "${ECHO_T}no" >&6; }
1.25045 + fi
1.25046 +
1.25047 ++
1.25048 + fi
1.25049 + if test -z "$ac_cv_prog_DLLTOOL"; then
1.25050 + ac_ct_DLLTOOL=$DLLTOOL
1.25051 + # Extract the first word of "dlltool", so it can be a program name with args.
1.25052 + set dummy dlltool; ac_word=$2
1.25053 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25054 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25055 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25056 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25057 + if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
1.25058 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25059 + else
1.25060 +@@ -3278,27 +3994,41 @@
1.25061 + IFS=$as_save_IFS
1.25062 + test -z "$as_dir" && as_dir=.
1.25063 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25064 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25065 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25066 + ac_cv_prog_ac_ct_DLLTOOL="dlltool"
1.25067 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25068 + break 2
1.25069 + fi
1.25070 + done
1.25071 + done
1.25072 ++IFS=$as_save_IFS
1.25073 +
1.25074 +- test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false"
1.25075 + fi
1.25076 + fi
1.25077 + ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
1.25078 + if test -n "$ac_ct_DLLTOOL"; then
1.25079 +- echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
1.25080 +-echo "${ECHO_T}$ac_ct_DLLTOOL" >&6
1.25081 ++ { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
1.25082 ++echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; }
1.25083 + else
1.25084 +- echo "$as_me:$LINENO: result: no" >&5
1.25085 +-echo "${ECHO_T}no" >&6
1.25086 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25087 ++echo "${ECHO_T}no" >&6; }
1.25088 + fi
1.25089 +
1.25090 +- DLLTOOL=$ac_ct_DLLTOOL
1.25091 ++ if test "x$ac_ct_DLLTOOL" = x; then
1.25092 ++ DLLTOOL="false"
1.25093 ++ else
1.25094 ++ case $cross_compiling:$ac_tool_warned in
1.25095 ++yes:)
1.25096 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.25097 ++whose name does not start with the host triplet. If you think this
1.25098 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.25099 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.25100 ++whose name does not start with the host triplet. If you think this
1.25101 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.25102 ++ac_tool_warned=yes ;;
1.25103 ++esac
1.25104 ++ DLLTOOL=$ac_ct_DLLTOOL
1.25105 ++ fi
1.25106 + else
1.25107 + DLLTOOL="$ac_cv_prog_DLLTOOL"
1.25108 + fi
1.25109 +@@ -3306,8 +4036,8 @@
1.25110 + if test -n "$ac_tool_prefix"; then
1.25111 + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
1.25112 + set dummy ${ac_tool_prefix}objdump; ac_word=$2
1.25113 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25114 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25115 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25116 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25117 + if test "${ac_cv_prog_OBJDUMP+set}" = set; then
1.25118 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25119 + else
1.25120 +@@ -3320,32 +4050,34 @@
1.25121 + IFS=$as_save_IFS
1.25122 + test -z "$as_dir" && as_dir=.
1.25123 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25124 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25125 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25126 + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
1.25127 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25128 + break 2
1.25129 + fi
1.25130 + done
1.25131 + done
1.25132 ++IFS=$as_save_IFS
1.25133 +
1.25134 + fi
1.25135 + fi
1.25136 + OBJDUMP=$ac_cv_prog_OBJDUMP
1.25137 + if test -n "$OBJDUMP"; then
1.25138 +- echo "$as_me:$LINENO: result: $OBJDUMP" >&5
1.25139 +-echo "${ECHO_T}$OBJDUMP" >&6
1.25140 ++ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
1.25141 ++echo "${ECHO_T}$OBJDUMP" >&6; }
1.25142 + else
1.25143 +- echo "$as_me:$LINENO: result: no" >&5
1.25144 +-echo "${ECHO_T}no" >&6
1.25145 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25146 ++echo "${ECHO_T}no" >&6; }
1.25147 + fi
1.25148 +
1.25149 ++
1.25150 + fi
1.25151 + if test -z "$ac_cv_prog_OBJDUMP"; then
1.25152 + ac_ct_OBJDUMP=$OBJDUMP
1.25153 + # Extract the first word of "objdump", so it can be a program name with args.
1.25154 + set dummy objdump; ac_word=$2
1.25155 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25156 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25157 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25158 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25159 + if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
1.25160 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25161 + else
1.25162 +@@ -3358,27 +4090,41 @@
1.25163 + IFS=$as_save_IFS
1.25164 + test -z "$as_dir" && as_dir=.
1.25165 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25166 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25167 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25168 + ac_cv_prog_ac_ct_OBJDUMP="objdump"
1.25169 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25170 + break 2
1.25171 + fi
1.25172 + done
1.25173 + done
1.25174 ++IFS=$as_save_IFS
1.25175 +
1.25176 +- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
1.25177 + fi
1.25178 + fi
1.25179 + ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
1.25180 + if test -n "$ac_ct_OBJDUMP"; then
1.25181 +- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
1.25182 +-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
1.25183 ++ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
1.25184 ++echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
1.25185 + else
1.25186 +- echo "$as_me:$LINENO: result: no" >&5
1.25187 +-echo "${ECHO_T}no" >&6
1.25188 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25189 ++echo "${ECHO_T}no" >&6; }
1.25190 + fi
1.25191 +
1.25192 +- OBJDUMP=$ac_ct_OBJDUMP
1.25193 ++ if test "x$ac_ct_OBJDUMP" = x; then
1.25194 ++ OBJDUMP="false"
1.25195 ++ else
1.25196 ++ case $cross_compiling:$ac_tool_warned in
1.25197 ++yes:)
1.25198 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.25199 ++whose name does not start with the host triplet. If you think this
1.25200 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.25201 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.25202 ++whose name does not start with the host triplet. If you think this
1.25203 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.25204 ++ac_tool_warned=yes ;;
1.25205 ++esac
1.25206 ++ OBJDUMP=$ac_ct_OBJDUMP
1.25207 ++ fi
1.25208 + else
1.25209 + OBJDUMP="$ac_cv_prog_OBJDUMP"
1.25210 + fi
1.25211 +@@ -3439,8 +4185,8 @@
1.25212 + if test -n "$ac_tool_prefix"; then
1.25213 + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
1.25214 + set dummy ${ac_tool_prefix}gcc; ac_word=$2
1.25215 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25216 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25217 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25218 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25219 + if test "${ac_cv_prog_CC+set}" = set; then
1.25220 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25221 + else
1.25222 +@@ -3453,32 +4199,34 @@
1.25223 + IFS=$as_save_IFS
1.25224 + test -z "$as_dir" && as_dir=.
1.25225 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25226 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25227 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25228 + ac_cv_prog_CC="${ac_tool_prefix}gcc"
1.25229 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25230 + break 2
1.25231 + fi
1.25232 + done
1.25233 + done
1.25234 ++IFS=$as_save_IFS
1.25235 +
1.25236 + fi
1.25237 + fi
1.25238 + CC=$ac_cv_prog_CC
1.25239 + if test -n "$CC"; then
1.25240 +- echo "$as_me:$LINENO: result: $CC" >&5
1.25241 +-echo "${ECHO_T}$CC" >&6
1.25242 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.25243 ++echo "${ECHO_T}$CC" >&6; }
1.25244 + else
1.25245 +- echo "$as_me:$LINENO: result: no" >&5
1.25246 +-echo "${ECHO_T}no" >&6
1.25247 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25248 ++echo "${ECHO_T}no" >&6; }
1.25249 + fi
1.25250 +
1.25251 ++
1.25252 + fi
1.25253 + if test -z "$ac_cv_prog_CC"; then
1.25254 + ac_ct_CC=$CC
1.25255 + # Extract the first word of "gcc", so it can be a program name with args.
1.25256 + set dummy gcc; ac_word=$2
1.25257 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25258 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25259 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25260 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25261 + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
1.25262 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25263 + else
1.25264 +@@ -3491,36 +4239,51 @@
1.25265 + IFS=$as_save_IFS
1.25266 + test -z "$as_dir" && as_dir=.
1.25267 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25268 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25269 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25270 + ac_cv_prog_ac_ct_CC="gcc"
1.25271 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25272 + break 2
1.25273 + fi
1.25274 + done
1.25275 + done
1.25276 ++IFS=$as_save_IFS
1.25277 +
1.25278 + fi
1.25279 + fi
1.25280 + ac_ct_CC=$ac_cv_prog_ac_ct_CC
1.25281 + if test -n "$ac_ct_CC"; then
1.25282 +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.25283 +-echo "${ECHO_T}$ac_ct_CC" >&6
1.25284 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.25285 ++echo "${ECHO_T}$ac_ct_CC" >&6; }
1.25286 + else
1.25287 +- echo "$as_me:$LINENO: result: no" >&5
1.25288 +-echo "${ECHO_T}no" >&6
1.25289 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25290 ++echo "${ECHO_T}no" >&6; }
1.25291 + fi
1.25292 +
1.25293 +- CC=$ac_ct_CC
1.25294 ++ if test "x$ac_ct_CC" = x; then
1.25295 ++ CC=""
1.25296 ++ else
1.25297 ++ case $cross_compiling:$ac_tool_warned in
1.25298 ++yes:)
1.25299 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.25300 ++whose name does not start with the host triplet. If you think this
1.25301 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.25302 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.25303 ++whose name does not start with the host triplet. If you think this
1.25304 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.25305 ++ac_tool_warned=yes ;;
1.25306 ++esac
1.25307 ++ CC=$ac_ct_CC
1.25308 ++ fi
1.25309 + else
1.25310 + CC="$ac_cv_prog_CC"
1.25311 + fi
1.25312 +
1.25313 + if test -z "$CC"; then
1.25314 +- if test -n "$ac_tool_prefix"; then
1.25315 +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
1.25316 ++ if test -n "$ac_tool_prefix"; then
1.25317 ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
1.25318 + set dummy ${ac_tool_prefix}cc; ac_word=$2
1.25319 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25320 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25321 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25322 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25323 + if test "${ac_cv_prog_CC+set}" = set; then
1.25324 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25325 + else
1.25326 +@@ -3533,98 +4296,59 @@
1.25327 + IFS=$as_save_IFS
1.25328 + test -z "$as_dir" && as_dir=.
1.25329 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25330 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25331 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25332 + ac_cv_prog_CC="${ac_tool_prefix}cc"
1.25333 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25334 + break 2
1.25335 + fi
1.25336 + done
1.25337 + done
1.25338 ++IFS=$as_save_IFS
1.25339 +
1.25340 + fi
1.25341 + fi
1.25342 + CC=$ac_cv_prog_CC
1.25343 + if test -n "$CC"; then
1.25344 +- echo "$as_me:$LINENO: result: $CC" >&5
1.25345 +-echo "${ECHO_T}$CC" >&6
1.25346 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.25347 ++echo "${ECHO_T}$CC" >&6; }
1.25348 + else
1.25349 +- echo "$as_me:$LINENO: result: no" >&5
1.25350 +-echo "${ECHO_T}no" >&6
1.25351 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25352 ++echo "${ECHO_T}no" >&6; }
1.25353 + fi
1.25354 +
1.25355 ++
1.25356 ++ fi
1.25357 + fi
1.25358 +-if test -z "$ac_cv_prog_CC"; then
1.25359 +- ac_ct_CC=$CC
1.25360 ++if test -z "$CC"; then
1.25361 + # Extract the first word of "cc", so it can be a program name with args.
1.25362 + set dummy cc; ac_word=$2
1.25363 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25364 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25365 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
1.25366 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25367 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25368 ++if test "${ac_cv_prog_CC+set}" = set; then
1.25369 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25370 + else
1.25371 +- if test -n "$ac_ct_CC"; then
1.25372 +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
1.25373 ++ if test -n "$CC"; then
1.25374 ++ ac_cv_prog_CC="$CC" # Let the user override the test.
1.25375 + else
1.25376 ++ ac_prog_rejected=no
1.25377 + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.25378 + for as_dir in $PATH
1.25379 + do
1.25380 + IFS=$as_save_IFS
1.25381 + test -z "$as_dir" && as_dir=.
1.25382 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25383 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25384 +- ac_cv_prog_ac_ct_CC="cc"
1.25385 +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25386 +- break 2
1.25387 +- fi
1.25388 +-done
1.25389 +-done
1.25390 +-
1.25391 +-fi
1.25392 +-fi
1.25393 +-ac_ct_CC=$ac_cv_prog_ac_ct_CC
1.25394 +-if test -n "$ac_ct_CC"; then
1.25395 +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.25396 +-echo "${ECHO_T}$ac_ct_CC" >&6
1.25397 +-else
1.25398 +- echo "$as_me:$LINENO: result: no" >&5
1.25399 +-echo "${ECHO_T}no" >&6
1.25400 +-fi
1.25401 +-
1.25402 +- CC=$ac_ct_CC
1.25403 +-else
1.25404 +- CC="$ac_cv_prog_CC"
1.25405 +-fi
1.25406 +-
1.25407 +-fi
1.25408 +-if test -z "$CC"; then
1.25409 +- # Extract the first word of "cc", so it can be a program name with args.
1.25410 +-set dummy cc; ac_word=$2
1.25411 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25412 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25413 +-if test "${ac_cv_prog_CC+set}" = set; then
1.25414 +- echo $ECHO_N "(cached) $ECHO_C" >&6
1.25415 +-else
1.25416 +- if test -n "$CC"; then
1.25417 +- ac_cv_prog_CC="$CC" # Let the user override the test.
1.25418 +-else
1.25419 +- ac_prog_rejected=no
1.25420 +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.25421 +-for as_dir in $PATH
1.25422 +-do
1.25423 +- IFS=$as_save_IFS
1.25424 +- test -z "$as_dir" && as_dir=.
1.25425 +- for ac_exec_ext in '' $ac_executable_extensions; do
1.25426 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25427 +- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
1.25428 +- ac_prog_rejected=yes
1.25429 +- continue
1.25430 +- fi
1.25431 +- ac_cv_prog_CC="cc"
1.25432 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25433 ++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
1.25434 ++ ac_prog_rejected=yes
1.25435 ++ continue
1.25436 ++ fi
1.25437 ++ ac_cv_prog_CC="cc"
1.25438 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25439 + break 2
1.25440 + fi
1.25441 + done
1.25442 + done
1.25443 ++IFS=$as_save_IFS
1.25444 +
1.25445 + if test $ac_prog_rejected = yes; then
1.25446 + # We found a bogon in the path, so make sure we never use it.
1.25447 +@@ -3642,22 +4366,23 @@
1.25448 + fi
1.25449 + CC=$ac_cv_prog_CC
1.25450 + if test -n "$CC"; then
1.25451 +- echo "$as_me:$LINENO: result: $CC" >&5
1.25452 +-echo "${ECHO_T}$CC" >&6
1.25453 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.25454 ++echo "${ECHO_T}$CC" >&6; }
1.25455 + else
1.25456 +- echo "$as_me:$LINENO: result: no" >&5
1.25457 +-echo "${ECHO_T}no" >&6
1.25458 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25459 ++echo "${ECHO_T}no" >&6; }
1.25460 + fi
1.25461 +
1.25462 ++
1.25463 + fi
1.25464 + if test -z "$CC"; then
1.25465 + if test -n "$ac_tool_prefix"; then
1.25466 +- for ac_prog in cl
1.25467 ++ for ac_prog in cl.exe
1.25468 + do
1.25469 + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
1.25470 + set dummy $ac_tool_prefix$ac_prog; ac_word=$2
1.25471 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25472 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25473 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25474 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25475 + if test "${ac_cv_prog_CC+set}" = set; then
1.25476 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25477 + else
1.25478 +@@ -3670,36 +4395,38 @@
1.25479 + IFS=$as_save_IFS
1.25480 + test -z "$as_dir" && as_dir=.
1.25481 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25482 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25483 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25484 + ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
1.25485 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25486 + break 2
1.25487 + fi
1.25488 + done
1.25489 + done
1.25490 ++IFS=$as_save_IFS
1.25491 +
1.25492 + fi
1.25493 + fi
1.25494 + CC=$ac_cv_prog_CC
1.25495 + if test -n "$CC"; then
1.25496 +- echo "$as_me:$LINENO: result: $CC" >&5
1.25497 +-echo "${ECHO_T}$CC" >&6
1.25498 ++ { echo "$as_me:$LINENO: result: $CC" >&5
1.25499 ++echo "${ECHO_T}$CC" >&6; }
1.25500 + else
1.25501 +- echo "$as_me:$LINENO: result: no" >&5
1.25502 +-echo "${ECHO_T}no" >&6
1.25503 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25504 ++echo "${ECHO_T}no" >&6; }
1.25505 + fi
1.25506 +
1.25507 ++
1.25508 + test -n "$CC" && break
1.25509 + done
1.25510 + fi
1.25511 + if test -z "$CC"; then
1.25512 + ac_ct_CC=$CC
1.25513 +- for ac_prog in cl
1.25514 ++ for ac_prog in cl.exe
1.25515 + do
1.25516 + # Extract the first word of "$ac_prog", so it can be a program name with args.
1.25517 + set dummy $ac_prog; ac_word=$2
1.25518 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25519 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.25520 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.25521 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.25522 + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
1.25523 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25524 + else
1.25525 +@@ -3712,29 +4439,45 @@
1.25526 + IFS=$as_save_IFS
1.25527 + test -z "$as_dir" && as_dir=.
1.25528 + for ac_exec_ext in '' $ac_executable_extensions; do
1.25529 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.25530 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.25531 + ac_cv_prog_ac_ct_CC="$ac_prog"
1.25532 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.25533 + break 2
1.25534 + fi
1.25535 + done
1.25536 + done
1.25537 ++IFS=$as_save_IFS
1.25538 +
1.25539 + fi
1.25540 + fi
1.25541 + ac_ct_CC=$ac_cv_prog_ac_ct_CC
1.25542 + if test -n "$ac_ct_CC"; then
1.25543 +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.25544 +-echo "${ECHO_T}$ac_ct_CC" >&6
1.25545 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
1.25546 ++echo "${ECHO_T}$ac_ct_CC" >&6; }
1.25547 + else
1.25548 +- echo "$as_me:$LINENO: result: no" >&5
1.25549 +-echo "${ECHO_T}no" >&6
1.25550 ++ { echo "$as_me:$LINENO: result: no" >&5
1.25551 ++echo "${ECHO_T}no" >&6; }
1.25552 + fi
1.25553 +
1.25554 ++
1.25555 + test -n "$ac_ct_CC" && break
1.25556 + done
1.25557 +
1.25558 +- CC=$ac_ct_CC
1.25559 ++ if test "x$ac_ct_CC" = x; then
1.25560 ++ CC=""
1.25561 ++ else
1.25562 ++ case $cross_compiling:$ac_tool_warned in
1.25563 ++yes:)
1.25564 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.25565 ++whose name does not start with the host triplet. If you think this
1.25566 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.25567 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.25568 ++whose name does not start with the host triplet. If you think this
1.25569 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.25570 ++ac_tool_warned=yes ;;
1.25571 ++esac
1.25572 ++ CC=$ac_ct_CC
1.25573 ++ fi
1.25574 + fi
1.25575 +
1.25576 + fi
1.25577 +@@ -3747,21 +4490,35 @@
1.25578 + { (exit 1); exit 1; }; }
1.25579 +
1.25580 + # Provide some information about the compiler.
1.25581 +-echo "$as_me:$LINENO:" \
1.25582 +- "checking for C compiler version" >&5
1.25583 ++echo "$as_me:$LINENO: checking for C compiler version" >&5
1.25584 + ac_compiler=`set X $ac_compile; echo $2`
1.25585 +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
1.25586 +- (eval $ac_compiler --version </dev/null >&5) 2>&5
1.25587 ++{ (ac_try="$ac_compiler --version >&5"
1.25588 ++case "(($ac_try" in
1.25589 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25590 ++ *) ac_try_echo=$ac_try;;
1.25591 ++esac
1.25592 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25593 ++ (eval "$ac_compiler --version >&5") 2>&5
1.25594 + ac_status=$?
1.25595 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25596 + (exit $ac_status); }
1.25597 +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
1.25598 +- (eval $ac_compiler -v </dev/null >&5) 2>&5
1.25599 ++{ (ac_try="$ac_compiler -v >&5"
1.25600 ++case "(($ac_try" in
1.25601 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25602 ++ *) ac_try_echo=$ac_try;;
1.25603 ++esac
1.25604 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25605 ++ (eval "$ac_compiler -v >&5") 2>&5
1.25606 + ac_status=$?
1.25607 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25608 + (exit $ac_status); }
1.25609 +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
1.25610 +- (eval $ac_compiler -V </dev/null >&5) 2>&5
1.25611 ++{ (ac_try="$ac_compiler -V >&5"
1.25612 ++case "(($ac_try" in
1.25613 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25614 ++ *) ac_try_echo=$ac_try;;
1.25615 ++esac
1.25616 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25617 ++ (eval "$ac_compiler -V >&5") 2>&5
1.25618 + ac_status=$?
1.25619 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25620 + (exit $ac_status); }
1.25621 +@@ -3786,47 +4543,77 @@
1.25622 + # Try to create an executable without -o first, disregard a.out.
1.25623 + # It will help us diagnose broken compilers, and finding out an intuition
1.25624 + # of exeext.
1.25625 +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
1.25626 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
1.25627 ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
1.25628 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
1.25629 + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
1.25630 +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
1.25631 +- (eval $ac_link_default) 2>&5
1.25632 ++#
1.25633 ++# List of possible output files, starting from the most likely.
1.25634 ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
1.25635 ++# only as a last resort. b.out is created by i960 compilers.
1.25636 ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
1.25637 ++#
1.25638 ++# The IRIX 6 linker writes into existing files which may not be
1.25639 ++# executable, retaining their permissions. Remove them first so a
1.25640 ++# subsequent execution test works.
1.25641 ++ac_rmfiles=
1.25642 ++for ac_file in $ac_files
1.25643 ++do
1.25644 ++ case $ac_file in
1.25645 ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
1.25646 ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
1.25647 ++ esac
1.25648 ++done
1.25649 ++rm -f $ac_rmfiles
1.25650 ++
1.25651 ++if { (ac_try="$ac_link_default"
1.25652 ++case "(($ac_try" in
1.25653 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25654 ++ *) ac_try_echo=$ac_try;;
1.25655 ++esac
1.25656 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25657 ++ (eval "$ac_link_default") 2>&5
1.25658 + ac_status=$?
1.25659 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25660 + (exit $ac_status); }; then
1.25661 +- # Find the output, starting from the most likely. This scheme is
1.25662 +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
1.25663 +-# resort.
1.25664 +-
1.25665 +-# Be careful to initialize this variable, since it used to be cached.
1.25666 +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
1.25667 +-ac_cv_exeext=
1.25668 +-# b.out is created by i960 compilers.
1.25669 +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
1.25670 ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
1.25671 ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
1.25672 ++# in a Makefile. We should not override ac_cv_exeext if it was cached,
1.25673 ++# so that the user can short-circuit this test for compilers unknown to
1.25674 ++# Autoconf.
1.25675 ++for ac_file in $ac_files ''
1.25676 + do
1.25677 + test -f "$ac_file" || continue
1.25678 + case $ac_file in
1.25679 +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
1.25680 +- ;;
1.25681 +- conftest.$ac_ext )
1.25682 +- # This is the source file.
1.25683 ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
1.25684 + ;;
1.25685 + [ab].out )
1.25686 + # We found the default executable, but exeext='' is most
1.25687 + # certainly right.
1.25688 + break;;
1.25689 + *.* )
1.25690 +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
1.25691 +- # FIXME: I believe we export ac_cv_exeext for Libtool,
1.25692 +- # but it would be cool to find out if it's true. Does anybody
1.25693 +- # maintain Libtool? --akim.
1.25694 +- export ac_cv_exeext
1.25695 ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
1.25696 ++ then :; else
1.25697 ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
1.25698 ++ fi
1.25699 ++ # We set ac_cv_exeext here because the later test for it is not
1.25700 ++ # safe: cross compilers may not add the suffix if given an `-o'
1.25701 ++ # argument, so we may need to know it at that point already.
1.25702 ++ # Even if this section looks crufty: it has the advantage of
1.25703 ++ # actually working.
1.25704 + break;;
1.25705 + * )
1.25706 + break;;
1.25707 + esac
1.25708 + done
1.25709 ++test "$ac_cv_exeext" = no && ac_cv_exeext=
1.25710 ++
1.25711 + else
1.25712 ++ ac_file=''
1.25713 ++fi
1.25714 ++
1.25715 ++{ echo "$as_me:$LINENO: result: $ac_file" >&5
1.25716 ++echo "${ECHO_T}$ac_file" >&6; }
1.25717 ++if test -z "$ac_file"; then
1.25718 + echo "$as_me: failed program was:" >&5
1.25719 + sed 's/^/| /' conftest.$ac_ext >&5
1.25720 +
1.25721 +@@ -3838,19 +4625,21 @@
1.25722 + fi
1.25723 +
1.25724 + ac_exeext=$ac_cv_exeext
1.25725 +-echo "$as_me:$LINENO: result: $ac_file" >&5
1.25726 +-echo "${ECHO_T}$ac_file" >&6
1.25727 +
1.25728 +-# Check the compiler produces executables we can run. If not, either
1.25729 ++# Check that the compiler produces executables we can run. If not, either
1.25730 + # the compiler is broken, or we cross compile.
1.25731 +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
1.25732 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
1.25733 ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
1.25734 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
1.25735 + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
1.25736 + # If not cross compiling, check that we can run a simple program.
1.25737 + if test "$cross_compiling" != yes; then
1.25738 + if { ac_try='./$ac_file'
1.25739 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.25740 +- (eval $ac_try) 2>&5
1.25741 ++ { (case "(($ac_try" in
1.25742 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25743 ++ *) ac_try_echo=$ac_try;;
1.25744 ++esac
1.25745 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25746 ++ (eval "$ac_try") 2>&5
1.25747 + ac_status=$?
1.25748 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25749 + (exit $ac_status); }; }; then
1.25750 +@@ -3869,22 +4658,27 @@
1.25751 + fi
1.25752 + fi
1.25753 + fi
1.25754 +-echo "$as_me:$LINENO: result: yes" >&5
1.25755 +-echo "${ECHO_T}yes" >&6
1.25756 ++{ echo "$as_me:$LINENO: result: yes" >&5
1.25757 ++echo "${ECHO_T}yes" >&6; }
1.25758 +
1.25759 + rm -f a.out a.exe conftest$ac_cv_exeext b.out
1.25760 + ac_clean_files=$ac_clean_files_save
1.25761 +-# Check the compiler produces executables we can run. If not, either
1.25762 ++# Check that the compiler produces executables we can run. If not, either
1.25763 + # the compiler is broken, or we cross compile.
1.25764 +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
1.25765 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
1.25766 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5
1.25767 +-echo "${ECHO_T}$cross_compiling" >&6
1.25768 +-
1.25769 +-echo "$as_me:$LINENO: checking for suffix of executables" >&5
1.25770 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
1.25771 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.25772 +- (eval $ac_link) 2>&5
1.25773 ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
1.25774 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
1.25775 ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
1.25776 ++echo "${ECHO_T}$cross_compiling" >&6; }
1.25777 ++
1.25778 ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
1.25779 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
1.25780 ++if { (ac_try="$ac_link"
1.25781 ++case "(($ac_try" in
1.25782 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25783 ++ *) ac_try_echo=$ac_try;;
1.25784 ++esac
1.25785 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25786 ++ (eval "$ac_link") 2>&5
1.25787 + ac_status=$?
1.25788 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25789 + (exit $ac_status); }; then
1.25790 +@@ -3895,9 +4689,8 @@
1.25791 + for ac_file in conftest.exe conftest conftest.*; do
1.25792 + test -f "$ac_file" || continue
1.25793 + case $ac_file in
1.25794 +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
1.25795 ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
1.25796 + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
1.25797 +- export ac_cv_exeext
1.25798 + break;;
1.25799 + * ) break;;
1.25800 + esac
1.25801 +@@ -3911,14 +4704,14 @@
1.25802 + fi
1.25803 +
1.25804 + rm -f conftest$ac_cv_exeext
1.25805 +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
1.25806 +-echo "${ECHO_T}$ac_cv_exeext" >&6
1.25807 ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
1.25808 ++echo "${ECHO_T}$ac_cv_exeext" >&6; }
1.25809 +
1.25810 + rm -f conftest.$ac_ext
1.25811 + EXEEXT=$ac_cv_exeext
1.25812 + ac_exeext=$EXEEXT
1.25813 +-echo "$as_me:$LINENO: checking for suffix of object files" >&5
1.25814 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
1.25815 ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
1.25816 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
1.25817 + if test "${ac_cv_objext+set}" = set; then
1.25818 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25819 + else
1.25820 +@@ -3938,14 +4731,20 @@
1.25821 + }
1.25822 + _ACEOF
1.25823 + rm -f conftest.o conftest.obj
1.25824 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.25825 +- (eval $ac_compile) 2>&5
1.25826 ++if { (ac_try="$ac_compile"
1.25827 ++case "(($ac_try" in
1.25828 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25829 ++ *) ac_try_echo=$ac_try;;
1.25830 ++esac
1.25831 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25832 ++ (eval "$ac_compile") 2>&5
1.25833 + ac_status=$?
1.25834 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25835 + (exit $ac_status); }; then
1.25836 +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
1.25837 ++ for ac_file in conftest.o conftest.obj conftest.*; do
1.25838 ++ test -f "$ac_file" || continue;
1.25839 + case $ac_file in
1.25840 +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
1.25841 ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
1.25842 + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
1.25843 + break;;
1.25844 + esac
1.25845 +@@ -3963,12 +4762,12 @@
1.25846 +
1.25847 + rm -f conftest.$ac_cv_objext conftest.$ac_ext
1.25848 + fi
1.25849 +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
1.25850 +-echo "${ECHO_T}$ac_cv_objext" >&6
1.25851 ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
1.25852 ++echo "${ECHO_T}$ac_cv_objext" >&6; }
1.25853 + OBJEXT=$ac_cv_objext
1.25854 + ac_objext=$OBJEXT
1.25855 +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
1.25856 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
1.25857 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
1.25858 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
1.25859 + if test "${ac_cv_c_compiler_gnu+set}" = set; then
1.25860 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25861 + else
1.25862 +@@ -3991,50 +4790,49 @@
1.25863 + }
1.25864 + _ACEOF
1.25865 + rm -f conftest.$ac_objext
1.25866 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.25867 +- (eval $ac_compile) 2>conftest.er1
1.25868 ++if { (ac_try="$ac_compile"
1.25869 ++case "(($ac_try" in
1.25870 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25871 ++ *) ac_try_echo=$ac_try;;
1.25872 ++esac
1.25873 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25874 ++ (eval "$ac_compile") 2>conftest.er1
1.25875 + ac_status=$?
1.25876 + grep -v '^ *+' conftest.er1 >conftest.err
1.25877 + rm -f conftest.er1
1.25878 + cat conftest.err >&5
1.25879 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25880 +- (exit $ac_status); } &&
1.25881 +- { ac_try='test -z "$ac_c_werror_flag"
1.25882 +- || test ! -s conftest.err'
1.25883 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.25884 +- (eval $ac_try) 2>&5
1.25885 +- ac_status=$?
1.25886 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25887 +- (exit $ac_status); }; } &&
1.25888 +- { ac_try='test -s conftest.$ac_objext'
1.25889 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.25890 +- (eval $ac_try) 2>&5
1.25891 +- ac_status=$?
1.25892 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25893 +- (exit $ac_status); }; }; then
1.25894 ++ (exit $ac_status); } && {
1.25895 ++ test -z "$ac_c_werror_flag" ||
1.25896 ++ test ! -s conftest.err
1.25897 ++ } && test -s conftest.$ac_objext; then
1.25898 + ac_compiler_gnu=yes
1.25899 + else
1.25900 + echo "$as_me: failed program was:" >&5
1.25901 + sed 's/^/| /' conftest.$ac_ext >&5
1.25902 +
1.25903 +-ac_compiler_gnu=no
1.25904 ++ ac_compiler_gnu=no
1.25905 + fi
1.25906 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.25907 ++
1.25908 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.25909 + ac_cv_c_compiler_gnu=$ac_compiler_gnu
1.25910 +
1.25911 + fi
1.25912 +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
1.25913 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
1.25914 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
1.25915 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
1.25916 + GCC=`test $ac_compiler_gnu = yes && echo yes`
1.25917 + ac_test_CFLAGS=${CFLAGS+set}
1.25918 + ac_save_CFLAGS=$CFLAGS
1.25919 +-CFLAGS="-g"
1.25920 +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
1.25921 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
1.25922 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
1.25923 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
1.25924 + if test "${ac_cv_prog_cc_g+set}" = set; then
1.25925 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.25926 + else
1.25927 +- cat >conftest.$ac_ext <<_ACEOF
1.25928 ++ ac_save_c_werror_flag=$ac_c_werror_flag
1.25929 ++ ac_c_werror_flag=yes
1.25930 ++ ac_cv_prog_cc_g=no
1.25931 ++ CFLAGS="-g"
1.25932 ++ cat >conftest.$ac_ext <<_ACEOF
1.25933 + /* confdefs.h. */
1.25934 + _ACEOF
1.25935 + cat confdefs.h >>conftest.$ac_ext
1.25936 +@@ -4050,38 +4848,118 @@
1.25937 + }
1.25938 + _ACEOF
1.25939 + rm -f conftest.$ac_objext
1.25940 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.25941 +- (eval $ac_compile) 2>conftest.er1
1.25942 ++if { (ac_try="$ac_compile"
1.25943 ++case "(($ac_try" in
1.25944 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25945 ++ *) ac_try_echo=$ac_try;;
1.25946 ++esac
1.25947 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25948 ++ (eval "$ac_compile") 2>conftest.er1
1.25949 + ac_status=$?
1.25950 + grep -v '^ *+' conftest.er1 >conftest.err
1.25951 + rm -f conftest.er1
1.25952 + cat conftest.err >&5
1.25953 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25954 +- (exit $ac_status); } &&
1.25955 +- { ac_try='test -z "$ac_c_werror_flag"
1.25956 +- || test ! -s conftest.err'
1.25957 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.25958 +- (eval $ac_try) 2>&5
1.25959 ++ (exit $ac_status); } && {
1.25960 ++ test -z "$ac_c_werror_flag" ||
1.25961 ++ test ! -s conftest.err
1.25962 ++ } && test -s conftest.$ac_objext; then
1.25963 ++ ac_cv_prog_cc_g=yes
1.25964 ++else
1.25965 ++ echo "$as_me: failed program was:" >&5
1.25966 ++sed 's/^/| /' conftest.$ac_ext >&5
1.25967 ++
1.25968 ++ CFLAGS=""
1.25969 ++ cat >conftest.$ac_ext <<_ACEOF
1.25970 ++/* confdefs.h. */
1.25971 ++_ACEOF
1.25972 ++cat confdefs.h >>conftest.$ac_ext
1.25973 ++cat >>conftest.$ac_ext <<_ACEOF
1.25974 ++/* end confdefs.h. */
1.25975 ++
1.25976 ++int
1.25977 ++main ()
1.25978 ++{
1.25979 ++
1.25980 ++ ;
1.25981 ++ return 0;
1.25982 ++}
1.25983 ++_ACEOF
1.25984 ++rm -f conftest.$ac_objext
1.25985 ++if { (ac_try="$ac_compile"
1.25986 ++case "(($ac_try" in
1.25987 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.25988 ++ *) ac_try_echo=$ac_try;;
1.25989 ++esac
1.25990 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.25991 ++ (eval "$ac_compile") 2>conftest.er1
1.25992 + ac_status=$?
1.25993 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.25994 ++ rm -f conftest.er1
1.25995 ++ cat conftest.err >&5
1.25996 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.25997 +- (exit $ac_status); }; } &&
1.25998 +- { ac_try='test -s conftest.$ac_objext'
1.25999 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26000 +- (eval $ac_try) 2>&5
1.26001 ++ (exit $ac_status); } && {
1.26002 ++ test -z "$ac_c_werror_flag" ||
1.26003 ++ test ! -s conftest.err
1.26004 ++ } && test -s conftest.$ac_objext; then
1.26005 ++ :
1.26006 ++else
1.26007 ++ echo "$as_me: failed program was:" >&5
1.26008 ++sed 's/^/| /' conftest.$ac_ext >&5
1.26009 ++
1.26010 ++ ac_c_werror_flag=$ac_save_c_werror_flag
1.26011 ++ CFLAGS="-g"
1.26012 ++ cat >conftest.$ac_ext <<_ACEOF
1.26013 ++/* confdefs.h. */
1.26014 ++_ACEOF
1.26015 ++cat confdefs.h >>conftest.$ac_ext
1.26016 ++cat >>conftest.$ac_ext <<_ACEOF
1.26017 ++/* end confdefs.h. */
1.26018 ++
1.26019 ++int
1.26020 ++main ()
1.26021 ++{
1.26022 ++
1.26023 ++ ;
1.26024 ++ return 0;
1.26025 ++}
1.26026 ++_ACEOF
1.26027 ++rm -f conftest.$ac_objext
1.26028 ++if { (ac_try="$ac_compile"
1.26029 ++case "(($ac_try" in
1.26030 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.26031 ++ *) ac_try_echo=$ac_try;;
1.26032 ++esac
1.26033 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.26034 ++ (eval "$ac_compile") 2>conftest.er1
1.26035 + ac_status=$?
1.26036 ++ grep -v '^ *+' conftest.er1 >conftest.err
1.26037 ++ rm -f conftest.er1
1.26038 ++ cat conftest.err >&5
1.26039 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26040 +- (exit $ac_status); }; }; then
1.26041 ++ (exit $ac_status); } && {
1.26042 ++ test -z "$ac_c_werror_flag" ||
1.26043 ++ test ! -s conftest.err
1.26044 ++ } && test -s conftest.$ac_objext; then
1.26045 + ac_cv_prog_cc_g=yes
1.26046 + else
1.26047 + echo "$as_me: failed program was:" >&5
1.26048 + sed 's/^/| /' conftest.$ac_ext >&5
1.26049 +
1.26050 +-ac_cv_prog_cc_g=no
1.26051 ++
1.26052 ++fi
1.26053 ++
1.26054 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.26055 + fi
1.26056 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.26057 ++
1.26058 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.26059 ++fi
1.26060 ++
1.26061 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.26062 ++ ac_c_werror_flag=$ac_save_c_werror_flag
1.26063 + fi
1.26064 +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
1.26065 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
1.26066 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
1.26067 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
1.26068 + if test "$ac_test_CFLAGS" = set; then
1.26069 + CFLAGS=$ac_save_CFLAGS
1.26070 + elif test $ac_cv_prog_cc_g = yes; then
1.26071 +@@ -4097,12 +4975,12 @@
1.26072 + CFLAGS=
1.26073 + fi
1.26074 + fi
1.26075 +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
1.26076 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
1.26077 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then
1.26078 ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
1.26079 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
1.26080 ++if test "${ac_cv_prog_cc_c89+set}" = set; then
1.26081 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26082 + else
1.26083 +- ac_cv_prog_cc_stdc=no
1.26084 ++ ac_cv_prog_cc_c89=no
1.26085 + ac_save_CC=$CC
1.26086 + cat >conftest.$ac_ext <<_ACEOF
1.26087 + /* confdefs.h. */
1.26088 +@@ -4136,12 +5014,17 @@
1.26089 + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
1.26090 + function prototypes and stuff, but not '\xHH' hex character constants.
1.26091 + These don't provoke an error unfortunately, instead are silently treated
1.26092 +- as 'x'. The following induces an error, until -std1 is added to get
1.26093 ++ as 'x'. The following induces an error, until -std is added to get
1.26094 + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
1.26095 + array size at least. It's necessary to write '\x00'==0 to get something
1.26096 +- that's true only with -std1. */
1.26097 ++ that's true only with -std. */
1.26098 + int osf4_cc_array ['\x00' == 0 ? 1 : -1];
1.26099 +
1.26100 ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
1.26101 ++ inside strings and character constants. */
1.26102 ++#define FOO(x) 'x'
1.26103 ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
1.26104 ++
1.26105 + int test (int i, double x);
1.26106 + struct s1 {int (*f) (int a);};
1.26107 + struct s2 {int (*f) (double a);};
1.26108 +@@ -4156,205 +5039,57 @@
1.26109 + return 0;
1.26110 + }
1.26111 + _ACEOF
1.26112 +-# Don't try gcc -ansi; that turns off useful extensions and
1.26113 +-# breaks some systems' header files.
1.26114 +-# AIX -qlanglvl=ansi
1.26115 +-# Ultrix and OSF/1 -std1
1.26116 +-# HP-UX 10.20 and later -Ae
1.26117 +-# HP-UX older versions -Aa -D_HPUX_SOURCE
1.26118 +-# SVR4 -Xc -D__EXTENSIONS__
1.26119 +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
1.26120 ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
1.26121 ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
1.26122 + do
1.26123 + CC="$ac_save_CC $ac_arg"
1.26124 + rm -f conftest.$ac_objext
1.26125 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.26126 +- (eval $ac_compile) 2>conftest.er1
1.26127 ++if { (ac_try="$ac_compile"
1.26128 ++case "(($ac_try" in
1.26129 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.26130 ++ *) ac_try_echo=$ac_try;;
1.26131 ++esac
1.26132 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.26133 ++ (eval "$ac_compile") 2>conftest.er1
1.26134 + ac_status=$?
1.26135 + grep -v '^ *+' conftest.er1 >conftest.err
1.26136 + rm -f conftest.er1
1.26137 + cat conftest.err >&5
1.26138 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26139 +- (exit $ac_status); } &&
1.26140 +- { ac_try='test -z "$ac_c_werror_flag"
1.26141 +- || test ! -s conftest.err'
1.26142 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26143 +- (eval $ac_try) 2>&5
1.26144 +- ac_status=$?
1.26145 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26146 +- (exit $ac_status); }; } &&
1.26147 +- { ac_try='test -s conftest.$ac_objext'
1.26148 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26149 +- (eval $ac_try) 2>&5
1.26150 +- ac_status=$?
1.26151 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26152 +- (exit $ac_status); }; }; then
1.26153 +- ac_cv_prog_cc_stdc=$ac_arg
1.26154 +-break
1.26155 ++ (exit $ac_status); } && {
1.26156 ++ test -z "$ac_c_werror_flag" ||
1.26157 ++ test ! -s conftest.err
1.26158 ++ } && test -s conftest.$ac_objext; then
1.26159 ++ ac_cv_prog_cc_c89=$ac_arg
1.26160 + else
1.26161 + echo "$as_me: failed program was:" >&5
1.26162 + sed 's/^/| /' conftest.$ac_ext >&5
1.26163 +
1.26164 ++
1.26165 + fi
1.26166 +-rm -f conftest.err conftest.$ac_objext
1.26167 ++
1.26168 ++rm -f core conftest.err conftest.$ac_objext
1.26169 ++ test "x$ac_cv_prog_cc_c89" != "xno" && break
1.26170 + done
1.26171 +-rm -f conftest.$ac_ext conftest.$ac_objext
1.26172 ++rm -f conftest.$ac_ext
1.26173 + CC=$ac_save_CC
1.26174 +
1.26175 + fi
1.26176 +-
1.26177 +-case "x$ac_cv_prog_cc_stdc" in
1.26178 +- x|xno)
1.26179 +- echo "$as_me:$LINENO: result: none needed" >&5
1.26180 +-echo "${ECHO_T}none needed" >&6 ;;
1.26181 ++# AC_CACHE_VAL
1.26182 ++case "x$ac_cv_prog_cc_c89" in
1.26183 ++ x)
1.26184 ++ { echo "$as_me:$LINENO: result: none needed" >&5
1.26185 ++echo "${ECHO_T}none needed" >&6; } ;;
1.26186 ++ xno)
1.26187 ++ { echo "$as_me:$LINENO: result: unsupported" >&5
1.26188 ++echo "${ECHO_T}unsupported" >&6; } ;;
1.26189 + *)
1.26190 +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
1.26191 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
1.26192 +- CC="$CC $ac_cv_prog_cc_stdc" ;;
1.26193 ++ CC="$CC $ac_cv_prog_cc_c89"
1.26194 ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
1.26195 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
1.26196 + esac
1.26197 +
1.26198 +-# Some people use a C++ compiler to compile C. Since we use `exit',
1.26199 +-# in C++ we need to declare it. In case someone uses the same compiler
1.26200 +-# for both compiling C and C++ we need to have the C++ compiler decide
1.26201 +-# the declaration of exit, since it's the most demanding environment.
1.26202 +-cat >conftest.$ac_ext <<_ACEOF
1.26203 +-#ifndef __cplusplus
1.26204 +- choke me
1.26205 +-#endif
1.26206 +-_ACEOF
1.26207 +-rm -f conftest.$ac_objext
1.26208 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.26209 +- (eval $ac_compile) 2>conftest.er1
1.26210 +- ac_status=$?
1.26211 +- grep -v '^ *+' conftest.er1 >conftest.err
1.26212 +- rm -f conftest.er1
1.26213 +- cat conftest.err >&5
1.26214 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26215 +- (exit $ac_status); } &&
1.26216 +- { ac_try='test -z "$ac_c_werror_flag"
1.26217 +- || test ! -s conftest.err'
1.26218 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26219 +- (eval $ac_try) 2>&5
1.26220 +- ac_status=$?
1.26221 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26222 +- (exit $ac_status); }; } &&
1.26223 +- { ac_try='test -s conftest.$ac_objext'
1.26224 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26225 +- (eval $ac_try) 2>&5
1.26226 +- ac_status=$?
1.26227 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26228 +- (exit $ac_status); }; }; then
1.26229 +- for ac_declaration in \
1.26230 +- '' \
1.26231 +- 'extern "C" void std::exit (int) throw (); using std::exit;' \
1.26232 +- 'extern "C" void std::exit (int); using std::exit;' \
1.26233 +- 'extern "C" void exit (int) throw ();' \
1.26234 +- 'extern "C" void exit (int);' \
1.26235 +- 'void exit (int);'
1.26236 +-do
1.26237 +- cat >conftest.$ac_ext <<_ACEOF
1.26238 +-/* confdefs.h. */
1.26239 +-_ACEOF
1.26240 +-cat confdefs.h >>conftest.$ac_ext
1.26241 +-cat >>conftest.$ac_ext <<_ACEOF
1.26242 +-/* end confdefs.h. */
1.26243 +-$ac_declaration
1.26244 +-#include <stdlib.h>
1.26245 +-int
1.26246 +-main ()
1.26247 +-{
1.26248 +-exit (42);
1.26249 +- ;
1.26250 +- return 0;
1.26251 +-}
1.26252 +-_ACEOF
1.26253 +-rm -f conftest.$ac_objext
1.26254 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.26255 +- (eval $ac_compile) 2>conftest.er1
1.26256 +- ac_status=$?
1.26257 +- grep -v '^ *+' conftest.er1 >conftest.err
1.26258 +- rm -f conftest.er1
1.26259 +- cat conftest.err >&5
1.26260 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26261 +- (exit $ac_status); } &&
1.26262 +- { ac_try='test -z "$ac_c_werror_flag"
1.26263 +- || test ! -s conftest.err'
1.26264 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26265 +- (eval $ac_try) 2>&5
1.26266 +- ac_status=$?
1.26267 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26268 +- (exit $ac_status); }; } &&
1.26269 +- { ac_try='test -s conftest.$ac_objext'
1.26270 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26271 +- (eval $ac_try) 2>&5
1.26272 +- ac_status=$?
1.26273 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26274 +- (exit $ac_status); }; }; then
1.26275 +- :
1.26276 +-else
1.26277 +- echo "$as_me: failed program was:" >&5
1.26278 +-sed 's/^/| /' conftest.$ac_ext >&5
1.26279 +-
1.26280 +-continue
1.26281 +-fi
1.26282 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.26283 +- cat >conftest.$ac_ext <<_ACEOF
1.26284 +-/* confdefs.h. */
1.26285 +-_ACEOF
1.26286 +-cat confdefs.h >>conftest.$ac_ext
1.26287 +-cat >>conftest.$ac_ext <<_ACEOF
1.26288 +-/* end confdefs.h. */
1.26289 +-$ac_declaration
1.26290 +-int
1.26291 +-main ()
1.26292 +-{
1.26293 +-exit (42);
1.26294 +- ;
1.26295 +- return 0;
1.26296 +-}
1.26297 +-_ACEOF
1.26298 +-rm -f conftest.$ac_objext
1.26299 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.26300 +- (eval $ac_compile) 2>conftest.er1
1.26301 +- ac_status=$?
1.26302 +- grep -v '^ *+' conftest.er1 >conftest.err
1.26303 +- rm -f conftest.er1
1.26304 +- cat conftest.err >&5
1.26305 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26306 +- (exit $ac_status); } &&
1.26307 +- { ac_try='test -z "$ac_c_werror_flag"
1.26308 +- || test ! -s conftest.err'
1.26309 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26310 +- (eval $ac_try) 2>&5
1.26311 +- ac_status=$?
1.26312 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26313 +- (exit $ac_status); }; } &&
1.26314 +- { ac_try='test -s conftest.$ac_objext'
1.26315 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.26316 +- (eval $ac_try) 2>&5
1.26317 +- ac_status=$?
1.26318 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.26319 +- (exit $ac_status); }; }; then
1.26320 +- break
1.26321 +-else
1.26322 +- echo "$as_me: failed program was:" >&5
1.26323 +-sed 's/^/| /' conftest.$ac_ext >&5
1.26324 +-
1.26325 +-fi
1.26326 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.26327 +-done
1.26328 +-rm -f conftest*
1.26329 +-if test -n "$ac_declaration"; then
1.26330 +- echo '#ifdef __cplusplus' >>confdefs.h
1.26331 +- echo $ac_declaration >>confdefs.h
1.26332 +- echo '#endif' >>confdefs.h
1.26333 +-fi
1.26334 +
1.26335 +-else
1.26336 +- echo "$as_me: failed program was:" >&5
1.26337 +-sed 's/^/| /' conftest.$ac_ext >&5
1.26338 +-
1.26339 +-fi
1.26340 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.26341 + ac_ext=c
1.26342 + ac_cpp='$CPP $CPPFLAGS'
1.26343 + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.26344 +@@ -4363,8 +5098,8 @@
1.26345 +
1.26346 + depcc="$CC" am_compiler_list=
1.26347 +
1.26348 +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
1.26349 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
1.26350 ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
1.26351 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
1.26352 + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
1.26353 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26354 + else
1.26355 +@@ -4446,58 +5181,273 @@
1.26356 + fi
1.26357 + done
1.26358 +
1.26359 +- cd ..
1.26360 +- rm -rf conftest.dir
1.26361 +-else
1.26362 +- am_cv_CC_dependencies_compiler_type=none
1.26363 ++ cd ..
1.26364 ++ rm -rf conftest.dir
1.26365 ++else
1.26366 ++ am_cv_CC_dependencies_compiler_type=none
1.26367 ++fi
1.26368 ++
1.26369 ++fi
1.26370 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
1.26371 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
1.26372 ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
1.26373 ++
1.26374 ++
1.26375 ++
1.26376 ++if
1.26377 ++ test "x$enable_dependency_tracking" != xno \
1.26378 ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
1.26379 ++ am__fastdepCC_TRUE=
1.26380 ++ am__fastdepCC_FALSE='#'
1.26381 ++else
1.26382 ++ am__fastdepCC_TRUE='#'
1.26383 ++ am__fastdepCC_FALSE=
1.26384 ++fi
1.26385 ++
1.26386 ++
1.26387 ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
1.26388 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
1.26389 ++if test "${ac_cv_path_GREP+set}" = set; then
1.26390 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.26391 ++else
1.26392 ++ # Extract the first word of "grep ggrep" to use in msg output
1.26393 ++if test -z "$GREP"; then
1.26394 ++set dummy grep ggrep; ac_prog_name=$2
1.26395 ++if test "${ac_cv_path_GREP+set}" = set; then
1.26396 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.26397 ++else
1.26398 ++ ac_path_GREP_found=false
1.26399 ++# Loop through the user's path and test for each of PROGNAME-LIST
1.26400 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.26401 ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
1.26402 ++do
1.26403 ++ IFS=$as_save_IFS
1.26404 ++ test -z "$as_dir" && as_dir=.
1.26405 ++ for ac_prog in grep ggrep; do
1.26406 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.26407 ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
1.26408 ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
1.26409 ++ # Check for GNU ac_path_GREP and select it if it is found.
1.26410 ++ # Check for GNU $ac_path_GREP
1.26411 ++case `"$ac_path_GREP" --version 2>&1` in
1.26412 ++*GNU*)
1.26413 ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
1.26414 ++*)
1.26415 ++ ac_count=0
1.26416 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
1.26417 ++ while :
1.26418 ++ do
1.26419 ++ cat "conftest.in" "conftest.in" >"conftest.tmp"
1.26420 ++ mv "conftest.tmp" "conftest.in"
1.26421 ++ cp "conftest.in" "conftest.nl"
1.26422 ++ echo 'GREP' >> "conftest.nl"
1.26423 ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
1.26424 ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
1.26425 ++ ac_count=`expr $ac_count + 1`
1.26426 ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then
1.26427 ++ # Best one so far, save it but keep looking for a better one
1.26428 ++ ac_cv_path_GREP="$ac_path_GREP"
1.26429 ++ ac_path_GREP_max=$ac_count
1.26430 ++ fi
1.26431 ++ # 10*(2^10) chars as input seems more than enough
1.26432 ++ test $ac_count -gt 10 && break
1.26433 ++ done
1.26434 ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
1.26435 ++esac
1.26436 ++
1.26437 ++
1.26438 ++ $ac_path_GREP_found && break 3
1.26439 ++ done
1.26440 ++done
1.26441 ++
1.26442 ++done
1.26443 ++IFS=$as_save_IFS
1.26444 ++
1.26445 ++
1.26446 ++fi
1.26447 ++
1.26448 ++GREP="$ac_cv_path_GREP"
1.26449 ++if test -z "$GREP"; then
1.26450 ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
1.26451 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
1.26452 ++ { (exit 1); exit 1; }; }
1.26453 ++fi
1.26454 ++
1.26455 ++else
1.26456 ++ ac_cv_path_GREP=$GREP
1.26457 ++fi
1.26458 ++
1.26459 ++
1.26460 ++fi
1.26461 ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
1.26462 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
1.26463 ++ GREP="$ac_cv_path_GREP"
1.26464 ++
1.26465 ++
1.26466 ++{ echo "$as_me:$LINENO: checking for egrep" >&5
1.26467 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
1.26468 ++if test "${ac_cv_path_EGREP+set}" = set; then
1.26469 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.26470 ++else
1.26471 ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
1.26472 ++ then ac_cv_path_EGREP="$GREP -E"
1.26473 ++ else
1.26474 ++ # Extract the first word of "egrep" to use in msg output
1.26475 ++if test -z "$EGREP"; then
1.26476 ++set dummy egrep; ac_prog_name=$2
1.26477 ++if test "${ac_cv_path_EGREP+set}" = set; then
1.26478 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.26479 ++else
1.26480 ++ ac_path_EGREP_found=false
1.26481 ++# Loop through the user's path and test for each of PROGNAME-LIST
1.26482 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.26483 ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
1.26484 ++do
1.26485 ++ IFS=$as_save_IFS
1.26486 ++ test -z "$as_dir" && as_dir=.
1.26487 ++ for ac_prog in egrep; do
1.26488 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.26489 ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
1.26490 ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
1.26491 ++ # Check for GNU ac_path_EGREP and select it if it is found.
1.26492 ++ # Check for GNU $ac_path_EGREP
1.26493 ++case `"$ac_path_EGREP" --version 2>&1` in
1.26494 ++*GNU*)
1.26495 ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
1.26496 ++*)
1.26497 ++ ac_count=0
1.26498 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
1.26499 ++ while :
1.26500 ++ do
1.26501 ++ cat "conftest.in" "conftest.in" >"conftest.tmp"
1.26502 ++ mv "conftest.tmp" "conftest.in"
1.26503 ++ cp "conftest.in" "conftest.nl"
1.26504 ++ echo 'EGREP' >> "conftest.nl"
1.26505 ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
1.26506 ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
1.26507 ++ ac_count=`expr $ac_count + 1`
1.26508 ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
1.26509 ++ # Best one so far, save it but keep looking for a better one
1.26510 ++ ac_cv_path_EGREP="$ac_path_EGREP"
1.26511 ++ ac_path_EGREP_max=$ac_count
1.26512 ++ fi
1.26513 ++ # 10*(2^10) chars as input seems more than enough
1.26514 ++ test $ac_count -gt 10 && break
1.26515 ++ done
1.26516 ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
1.26517 ++esac
1.26518 ++
1.26519 ++
1.26520 ++ $ac_path_EGREP_found && break 3
1.26521 ++ done
1.26522 ++done
1.26523 ++
1.26524 ++done
1.26525 ++IFS=$as_save_IFS
1.26526 ++
1.26527 ++
1.26528 + fi
1.26529 +
1.26530 ++EGREP="$ac_cv_path_EGREP"
1.26531 ++if test -z "$EGREP"; then
1.26532 ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
1.26533 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
1.26534 ++ { (exit 1); exit 1; }; }
1.26535 + fi
1.26536 +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
1.26537 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
1.26538 +-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
1.26539 +
1.26540 ++else
1.26541 ++ ac_cv_path_EGREP=$EGREP
1.26542 ++fi
1.26543 +
1.26544 +
1.26545 +-if
1.26546 +- test "x$enable_dependency_tracking" != xno \
1.26547 +- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
1.26548 +- am__fastdepCC_TRUE=
1.26549 +- am__fastdepCC_FALSE='#'
1.26550 +-else
1.26551 +- am__fastdepCC_TRUE='#'
1.26552 +- am__fastdepCC_FALSE=
1.26553 ++ fi
1.26554 + fi
1.26555 ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
1.26556 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
1.26557 ++ EGREP="$ac_cv_path_EGREP"
1.26558 +
1.26559 +
1.26560 +-echo "$as_me:$LINENO: checking for egrep" >&5
1.26561 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
1.26562 +-if test "${ac_cv_prog_egrep+set}" = set; then
1.26563 ++{ echo "$as_me:$LINENO: checking for fgrep" >&5
1.26564 ++echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; }
1.26565 ++if test "${ac_cv_path_FGREP+set}" = set; then
1.26566 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.26567 ++else
1.26568 ++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
1.26569 ++ then ac_cv_path_FGREP="$GREP -F"
1.26570 ++ else
1.26571 ++ # Extract the first word of "fgrep" to use in msg output
1.26572 ++if test -z "$FGREP"; then
1.26573 ++set dummy fgrep; ac_prog_name=$2
1.26574 ++if test "${ac_cv_path_FGREP+set}" = set; then
1.26575 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26576 + else
1.26577 +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
1.26578 +- then ac_cv_prog_egrep='grep -E'
1.26579 +- else ac_cv_prog_egrep='egrep'
1.26580 ++ ac_path_FGREP_found=false
1.26581 ++# Loop through the user's path and test for each of PROGNAME-LIST
1.26582 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.26583 ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
1.26584 ++do
1.26585 ++ IFS=$as_save_IFS
1.26586 ++ test -z "$as_dir" && as_dir=.
1.26587 ++ for ac_prog in fgrep; do
1.26588 ++ for ac_exec_ext in '' $ac_executable_extensions; do
1.26589 ++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
1.26590 ++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
1.26591 ++ # Check for GNU ac_path_FGREP and select it if it is found.
1.26592 ++ # Check for GNU $ac_path_FGREP
1.26593 ++case `"$ac_path_FGREP" --version 2>&1` in
1.26594 ++*GNU*)
1.26595 ++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
1.26596 ++*)
1.26597 ++ ac_count=0
1.26598 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
1.26599 ++ while :
1.26600 ++ do
1.26601 ++ cat "conftest.in" "conftest.in" >"conftest.tmp"
1.26602 ++ mv "conftest.tmp" "conftest.in"
1.26603 ++ cp "conftest.in" "conftest.nl"
1.26604 ++ echo 'FGREP' >> "conftest.nl"
1.26605 ++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
1.26606 ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
1.26607 ++ ac_count=`expr $ac_count + 1`
1.26608 ++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
1.26609 ++ # Best one so far, save it but keep looking for a better one
1.26610 ++ ac_cv_path_FGREP="$ac_path_FGREP"
1.26611 ++ ac_path_FGREP_max=$ac_count
1.26612 + fi
1.26613 ++ # 10*(2^10) chars as input seems more than enough
1.26614 ++ test $ac_count -gt 10 && break
1.26615 ++ done
1.26616 ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
1.26617 ++esac
1.26618 ++
1.26619 ++
1.26620 ++ $ac_path_FGREP_found && break 3
1.26621 ++ done
1.26622 ++done
1.26623 ++
1.26624 ++done
1.26625 ++IFS=$as_save_IFS
1.26626 ++
1.26627 ++
1.26628 + fi
1.26629 +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
1.26630 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
1.26631 +- EGREP=$ac_cv_prog_egrep
1.26632 +
1.26633 ++FGREP="$ac_cv_path_FGREP"
1.26634 ++if test -z "$FGREP"; then
1.26635 ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
1.26636 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
1.26637 ++ { (exit 1); exit 1; }; }
1.26638 ++fi
1.26639 +
1.26640 +-echo "$as_me:$LINENO: checking for fgrep" >&5
1.26641 +-echo $ECHO_N "checking for fgrep... $ECHO_C" >&6
1.26642 +-if test "${ac_cv_prog_fgrep+set}" = set; then
1.26643 +- echo $ECHO_N "(cached) $ECHO_C" >&6
1.26644 + else
1.26645 +- if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1
1.26646 +- then ac_cv_prog_fgrep='grep -F'
1.26647 +- else ac_cv_prog_fgrep='fgrep'
1.26648 +- fi
1.26649 ++ ac_cv_path_FGREP=$FGREP
1.26650 ++fi
1.26651 ++
1.26652 ++
1.26653 ++ fi
1.26654 + fi
1.26655 +-echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5
1.26656 +-echo "${ECHO_T}$ac_cv_prog_fgrep" >&6
1.26657 +- FGREP=$ac_cv_prog_fgrep
1.26658 ++{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
1.26659 ++echo "${ECHO_T}$ac_cv_path_FGREP" >&6; }
1.26660 ++ FGREP="$ac_cv_path_FGREP"
1.26661 +
1.26662 +
1.26663 + test -z "$GREP" && GREP=grep
1.26664 +@@ -4520,18 +5470,18 @@
1.26665 +
1.26666 +
1.26667 +
1.26668 +-# Check whether --with-gnu-ld or --without-gnu-ld was given.
1.26669 ++# Check whether --with-gnu-ld was given.
1.26670 + if test "${with_gnu_ld+set}" = set; then
1.26671 +- withval="$with_gnu_ld"
1.26672 +- test "$withval" = no || with_gnu_ld=yes
1.26673 ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
1.26674 + else
1.26675 + with_gnu_ld=no
1.26676 +-fi;
1.26677 ++fi
1.26678 ++
1.26679 + ac_prog=ld
1.26680 + if test "$GCC" = yes; then
1.26681 + # Check if gcc -print-prog-name=ld gives a path.
1.26682 +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5
1.26683 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
1.26684 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
1.26685 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
1.26686 + case $host in
1.26687 + *-*-mingw*)
1.26688 + # gcc leaves a trailing carriage return which upsets mingw
1.26689 +@@ -4560,11 +5510,11 @@
1.26690 + ;;
1.26691 + esac
1.26692 + elif test "$with_gnu_ld" = yes; then
1.26693 +- echo "$as_me:$LINENO: checking for GNU ld" >&5
1.26694 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
1.26695 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5
1.26696 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
1.26697 + else
1.26698 +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5
1.26699 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
1.26700 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
1.26701 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
1.26702 + fi
1.26703 + if test "${lt_cv_path_LD+set}" = set; then
1.26704 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26705 +@@ -4597,17 +5547,17 @@
1.26706 +
1.26707 + LD="$lt_cv_path_LD"
1.26708 + if test -n "$LD"; then
1.26709 +- echo "$as_me:$LINENO: result: $LD" >&5
1.26710 +-echo "${ECHO_T}$LD" >&6
1.26711 ++ { echo "$as_me:$LINENO: result: $LD" >&5
1.26712 ++echo "${ECHO_T}$LD" >&6; }
1.26713 + else
1.26714 +- echo "$as_me:$LINENO: result: no" >&5
1.26715 +-echo "${ECHO_T}no" >&6
1.26716 ++ { echo "$as_me:$LINENO: result: no" >&5
1.26717 ++echo "${ECHO_T}no" >&6; }
1.26718 + fi
1.26719 + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
1.26720 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
1.26721 + { (exit 1); exit 1; }; }
1.26722 +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
1.26723 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
1.26724 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
1.26725 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
1.26726 + if test "${lt_cv_prog_gnu_ld+set}" = set; then
1.26727 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26728 + else
1.26729 +@@ -4621,8 +5571,8 @@
1.26730 + ;;
1.26731 + esac
1.26732 + fi
1.26733 +-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
1.26734 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
1.26735 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
1.26736 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
1.26737 + with_gnu_ld=$lt_cv_prog_gnu_ld
1.26738 +
1.26739 +
1.26740 +@@ -4633,8 +5583,8 @@
1.26741 +
1.26742 +
1.26743 +
1.26744 +-echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
1.26745 +-echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6
1.26746 ++{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
1.26747 ++echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; }
1.26748 + if test "${lt_cv_path_NM+set}" = set; then
1.26749 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26750 + else
1.26751 +@@ -4682,8 +5632,8 @@
1.26752 + : ${lt_cv_path_NM=no}
1.26753 + fi
1.26754 + fi
1.26755 +-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
1.26756 +-echo "${ECHO_T}$lt_cv_path_NM" >&6
1.26757 ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
1.26758 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; }
1.26759 + if test "$lt_cv_path_NM" != "no"; then
1.26760 + NM="$lt_cv_path_NM"
1.26761 + else
1.26762 +@@ -4693,8 +5643,8 @@
1.26763 + do
1.26764 + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
1.26765 + set dummy $ac_tool_prefix$ac_prog; ac_word=$2
1.26766 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.26767 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.26768 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.26769 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.26770 + if test "${ac_cv_prog_DUMPBIN+set}" = set; then
1.26771 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26772 + else
1.26773 +@@ -4707,25 +5657,27 @@
1.26774 + IFS=$as_save_IFS
1.26775 + test -z "$as_dir" && as_dir=.
1.26776 + for ac_exec_ext in '' $ac_executable_extensions; do
1.26777 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.26778 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.26779 + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
1.26780 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.26781 + break 2
1.26782 + fi
1.26783 + done
1.26784 + done
1.26785 ++IFS=$as_save_IFS
1.26786 +
1.26787 + fi
1.26788 + fi
1.26789 + DUMPBIN=$ac_cv_prog_DUMPBIN
1.26790 + if test -n "$DUMPBIN"; then
1.26791 +- echo "$as_me:$LINENO: result: $DUMPBIN" >&5
1.26792 +-echo "${ECHO_T}$DUMPBIN" >&6
1.26793 ++ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5
1.26794 ++echo "${ECHO_T}$DUMPBIN" >&6; }
1.26795 + else
1.26796 +- echo "$as_me:$LINENO: result: no" >&5
1.26797 +-echo "${ECHO_T}no" >&6
1.26798 ++ { echo "$as_me:$LINENO: result: no" >&5
1.26799 ++echo "${ECHO_T}no" >&6; }
1.26800 + fi
1.26801 +
1.26802 ++
1.26803 + test -n "$DUMPBIN" && break
1.26804 + done
1.26805 + fi
1.26806 +@@ -4735,8 +5687,8 @@
1.26807 + do
1.26808 + # Extract the first word of "$ac_prog", so it can be a program name with args.
1.26809 + set dummy $ac_prog; ac_word=$2
1.26810 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.26811 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.26812 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.26813 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.26814 + if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
1.26815 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26816 + else
1.26817 +@@ -4749,30 +5701,45 @@
1.26818 + IFS=$as_save_IFS
1.26819 + test -z "$as_dir" && as_dir=.
1.26820 + for ac_exec_ext in '' $ac_executable_extensions; do
1.26821 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.26822 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.26823 + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
1.26824 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.26825 + break 2
1.26826 + fi
1.26827 + done
1.26828 + done
1.26829 ++IFS=$as_save_IFS
1.26830 +
1.26831 + fi
1.26832 + fi
1.26833 + ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
1.26834 + if test -n "$ac_ct_DUMPBIN"; then
1.26835 +- echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
1.26836 +-echo "${ECHO_T}$ac_ct_DUMPBIN" >&6
1.26837 ++ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
1.26838 ++echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; }
1.26839 + else
1.26840 +- echo "$as_me:$LINENO: result: no" >&5
1.26841 +-echo "${ECHO_T}no" >&6
1.26842 ++ { echo "$as_me:$LINENO: result: no" >&5
1.26843 ++echo "${ECHO_T}no" >&6; }
1.26844 + fi
1.26845 +
1.26846 ++
1.26847 + test -n "$ac_ct_DUMPBIN" && break
1.26848 + done
1.26849 +-test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":"
1.26850 +
1.26851 +- DUMPBIN=$ac_ct_DUMPBIN
1.26852 ++ if test "x$ac_ct_DUMPBIN" = x; then
1.26853 ++ DUMPBIN=":"
1.26854 ++ else
1.26855 ++ case $cross_compiling:$ac_tool_warned in
1.26856 ++yes:)
1.26857 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.26858 ++whose name does not start with the host triplet. If you think this
1.26859 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.26860 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.26861 ++whose name does not start with the host triplet. If you think this
1.26862 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.26863 ++ac_tool_warned=yes ;;
1.26864 ++esac
1.26865 ++ DUMPBIN=$ac_ct_DUMPBIN
1.26866 ++ fi
1.26867 + fi
1.26868 +
1.26869 +
1.26870 +@@ -4787,43 +5754,43 @@
1.26871 +
1.26872 +
1.26873 +
1.26874 +-echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
1.26875 +-echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6
1.26876 ++{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
1.26877 ++echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; }
1.26878 + if test "${lt_cv_nm_interface+set}" = set; then
1.26879 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26880 + else
1.26881 + lt_cv_nm_interface="BSD nm"
1.26882 + echo "int some_variable = 0;" > conftest.$ac_ext
1.26883 +- (eval echo "\"\$as_me:4797: $ac_compile\"" >&5)
1.26884 ++ (eval echo "\"\$as_me:5764: $ac_compile\"" >&5)
1.26885 + (eval "$ac_compile" 2>conftest.err)
1.26886 + cat conftest.err >&5
1.26887 +- (eval echo "\"\$as_me:4800: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
1.26888 ++ (eval echo "\"\$as_me:5767: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
1.26889 + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
1.26890 + cat conftest.err >&5
1.26891 +- (eval echo "\"\$as_me:4803: output\"" >&5)
1.26892 ++ (eval echo "\"\$as_me:5770: output\"" >&5)
1.26893 + cat conftest.out >&5
1.26894 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then
1.26895 + lt_cv_nm_interface="MS dumpbin"
1.26896 + fi
1.26897 + rm -f conftest*
1.26898 + fi
1.26899 +-echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
1.26900 +-echo "${ECHO_T}$lt_cv_nm_interface" >&6
1.26901 ++{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
1.26902 ++echo "${ECHO_T}$lt_cv_nm_interface" >&6; }
1.26903 +
1.26904 +-echo "$as_me:$LINENO: checking whether ln -s works" >&5
1.26905 +-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
1.26906 ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
1.26907 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
1.26908 + LN_S=$as_ln_s
1.26909 + if test "$LN_S" = "ln -s"; then
1.26910 +- echo "$as_me:$LINENO: result: yes" >&5
1.26911 +-echo "${ECHO_T}yes" >&6
1.26912 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.26913 ++echo "${ECHO_T}yes" >&6; }
1.26914 + else
1.26915 +- echo "$as_me:$LINENO: result: no, using $LN_S" >&5
1.26916 +-echo "${ECHO_T}no, using $LN_S" >&6
1.26917 ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
1.26918 ++echo "${ECHO_T}no, using $LN_S" >&6; }
1.26919 + fi
1.26920 +
1.26921 + # find the maximum length of command line arguments
1.26922 +-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
1.26923 +-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
1.26924 ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
1.26925 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
1.26926 + if test "${lt_cv_sys_max_cmd_len+set}" = set; then
1.26927 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26928 + else
1.26929 +@@ -4942,11 +5909,11 @@
1.26930 + fi
1.26931 +
1.26932 + if test -n $lt_cv_sys_max_cmd_len ; then
1.26933 +- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
1.26934 +-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
1.26935 ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
1.26936 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
1.26937 + else
1.26938 +- echo "$as_me:$LINENO: result: none" >&5
1.26939 +-echo "${ECHO_T}none" >&6
1.26940 ++ { echo "$as_me:$LINENO: result: none" >&5
1.26941 ++echo "${ECHO_T}none" >&6; }
1.26942 + fi
1.26943 + max_cmd_len=$lt_cv_sys_max_cmd_len
1.26944 +
1.26945 +@@ -4959,8 +5926,8 @@
1.26946 + : ${MV="mv -f"}
1.26947 + : ${RM="rm -f"}
1.26948 +
1.26949 +-echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
1.26950 +-echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6
1.26951 ++{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
1.26952 ++echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; }
1.26953 + # Try some XSI features
1.26954 + xsi_shell=no
1.26955 + ( _lt_dummy="a/b/c"
1.26956 +@@ -4969,18 +5936,18 @@
1.26957 + && eval 'test $(( 1 + 1 )) -eq 2 \
1.26958 + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
1.26959 + && xsi_shell=yes
1.26960 +-echo "$as_me:$LINENO: result: $xsi_shell" >&5
1.26961 +-echo "${ECHO_T}$xsi_shell" >&6
1.26962 ++{ echo "$as_me:$LINENO: result: $xsi_shell" >&5
1.26963 ++echo "${ECHO_T}$xsi_shell" >&6; }
1.26964 +
1.26965 +
1.26966 +-echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
1.26967 +-echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6
1.26968 ++{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
1.26969 ++echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; }
1.26970 + lt_shell_append=no
1.26971 + ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
1.26972 + >/dev/null 2>&1 \
1.26973 + && lt_shell_append=yes
1.26974 +-echo "$as_me:$LINENO: result: $lt_shell_append" >&5
1.26975 +-echo "${ECHO_T}$lt_shell_append" >&6
1.26976 ++{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5
1.26977 ++echo "${ECHO_T}$lt_shell_append" >&6; }
1.26978 +
1.26979 +
1.26980 + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.26981 +@@ -5014,15 +5981,15 @@
1.26982 +
1.26983 +
1.26984 +
1.26985 +-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
1.26986 +-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
1.26987 ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
1.26988 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
1.26989 + if test "${lt_cv_ld_reload_flag+set}" = set; then
1.26990 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.26991 + else
1.26992 + lt_cv_ld_reload_flag='-r'
1.26993 + fi
1.26994 +-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
1.26995 +-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
1.26996 ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
1.26997 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
1.26998 + reload_flag=$lt_cv_ld_reload_flag
1.26999 + case $reload_flag in
1.27000 + "" | " "*) ;;
1.27001 +@@ -5050,8 +6017,8 @@
1.27002 + if test -n "$ac_tool_prefix"; then
1.27003 + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
1.27004 + set dummy ${ac_tool_prefix}objdump; ac_word=$2
1.27005 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27006 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27007 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27008 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27009 + if test "${ac_cv_prog_OBJDUMP+set}" = set; then
1.27010 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27011 + else
1.27012 +@@ -5064,32 +6031,34 @@
1.27013 + IFS=$as_save_IFS
1.27014 + test -z "$as_dir" && as_dir=.
1.27015 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27016 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27017 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27018 + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
1.27019 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27020 + break 2
1.27021 + fi
1.27022 + done
1.27023 + done
1.27024 ++IFS=$as_save_IFS
1.27025 +
1.27026 + fi
1.27027 + fi
1.27028 + OBJDUMP=$ac_cv_prog_OBJDUMP
1.27029 + if test -n "$OBJDUMP"; then
1.27030 +- echo "$as_me:$LINENO: result: $OBJDUMP" >&5
1.27031 +-echo "${ECHO_T}$OBJDUMP" >&6
1.27032 ++ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
1.27033 ++echo "${ECHO_T}$OBJDUMP" >&6; }
1.27034 + else
1.27035 +- echo "$as_me:$LINENO: result: no" >&5
1.27036 +-echo "${ECHO_T}no" >&6
1.27037 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27038 ++echo "${ECHO_T}no" >&6; }
1.27039 + fi
1.27040 +
1.27041 ++
1.27042 + fi
1.27043 + if test -z "$ac_cv_prog_OBJDUMP"; then
1.27044 + ac_ct_OBJDUMP=$OBJDUMP
1.27045 + # Extract the first word of "objdump", so it can be a program name with args.
1.27046 + set dummy objdump; ac_word=$2
1.27047 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27048 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27049 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27050 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27051 + if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
1.27052 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27053 + else
1.27054 +@@ -5102,27 +6071,41 @@
1.27055 + IFS=$as_save_IFS
1.27056 + test -z "$as_dir" && as_dir=.
1.27057 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27058 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27059 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27060 + ac_cv_prog_ac_ct_OBJDUMP="objdump"
1.27061 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27062 + break 2
1.27063 + fi
1.27064 + done
1.27065 + done
1.27066 ++IFS=$as_save_IFS
1.27067 +
1.27068 +- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
1.27069 + fi
1.27070 + fi
1.27071 + ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
1.27072 + if test -n "$ac_ct_OBJDUMP"; then
1.27073 +- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
1.27074 +-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
1.27075 ++ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
1.27076 ++echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
1.27077 + else
1.27078 +- echo "$as_me:$LINENO: result: no" >&5
1.27079 +-echo "${ECHO_T}no" >&6
1.27080 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27081 ++echo "${ECHO_T}no" >&6; }
1.27082 + fi
1.27083 +
1.27084 +- OBJDUMP=$ac_ct_OBJDUMP
1.27085 ++ if test "x$ac_ct_OBJDUMP" = x; then
1.27086 ++ OBJDUMP="false"
1.27087 ++ else
1.27088 ++ case $cross_compiling:$ac_tool_warned in
1.27089 ++yes:)
1.27090 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.27091 ++whose name does not start with the host triplet. If you think this
1.27092 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.27093 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.27094 ++whose name does not start with the host triplet. If you think this
1.27095 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.27096 ++ac_tool_warned=yes ;;
1.27097 ++esac
1.27098 ++ OBJDUMP=$ac_ct_OBJDUMP
1.27099 ++ fi
1.27100 + else
1.27101 + OBJDUMP="$ac_cv_prog_OBJDUMP"
1.27102 + fi
1.27103 +@@ -5134,8 +6117,8 @@
1.27104 +
1.27105 +
1.27106 +
1.27107 +-echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
1.27108 +-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6
1.27109 ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
1.27110 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
1.27111 + if test "${lt_cv_deplibs_check_method+set}" = set; then
1.27112 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27113 + else
1.27114 +@@ -5330,8 +6313,8 @@
1.27115 + esac
1.27116 +
1.27117 + fi
1.27118 +-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
1.27119 +-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
1.27120 ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
1.27121 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
1.27122 + file_magic_cmd=$lt_cv_file_magic_cmd
1.27123 + deplibs_check_method=$lt_cv_deplibs_check_method
1.27124 + test -z "$deplibs_check_method" && deplibs_check_method=unknown
1.27125 +@@ -5350,8 +6333,8 @@
1.27126 + if test -n "$ac_tool_prefix"; then
1.27127 + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
1.27128 + set dummy ${ac_tool_prefix}ar; ac_word=$2
1.27129 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27130 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27131 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27132 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27133 + if test "${ac_cv_prog_AR+set}" = set; then
1.27134 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27135 + else
1.27136 +@@ -5364,32 +6347,34 @@
1.27137 + IFS=$as_save_IFS
1.27138 + test -z "$as_dir" && as_dir=.
1.27139 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27140 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27141 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27142 + ac_cv_prog_AR="${ac_tool_prefix}ar"
1.27143 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27144 + break 2
1.27145 + fi
1.27146 + done
1.27147 + done
1.27148 ++IFS=$as_save_IFS
1.27149 +
1.27150 + fi
1.27151 + fi
1.27152 + AR=$ac_cv_prog_AR
1.27153 + if test -n "$AR"; then
1.27154 +- echo "$as_me:$LINENO: result: $AR" >&5
1.27155 +-echo "${ECHO_T}$AR" >&6
1.27156 ++ { echo "$as_me:$LINENO: result: $AR" >&5
1.27157 ++echo "${ECHO_T}$AR" >&6; }
1.27158 + else
1.27159 +- echo "$as_me:$LINENO: result: no" >&5
1.27160 +-echo "${ECHO_T}no" >&6
1.27161 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27162 ++echo "${ECHO_T}no" >&6; }
1.27163 + fi
1.27164 +
1.27165 ++
1.27166 + fi
1.27167 + if test -z "$ac_cv_prog_AR"; then
1.27168 + ac_ct_AR=$AR
1.27169 + # Extract the first word of "ar", so it can be a program name with args.
1.27170 + set dummy ar; ac_word=$2
1.27171 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27172 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27173 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27174 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27175 + if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
1.27176 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27177 + else
1.27178 +@@ -5402,27 +6387,41 @@
1.27179 + IFS=$as_save_IFS
1.27180 + test -z "$as_dir" && as_dir=.
1.27181 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27182 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27183 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27184 + ac_cv_prog_ac_ct_AR="ar"
1.27185 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27186 + break 2
1.27187 + fi
1.27188 + done
1.27189 + done
1.27190 ++IFS=$as_save_IFS
1.27191 +
1.27192 +- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
1.27193 + fi
1.27194 + fi
1.27195 + ac_ct_AR=$ac_cv_prog_ac_ct_AR
1.27196 + if test -n "$ac_ct_AR"; then
1.27197 +- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.27198 +-echo "${ECHO_T}$ac_ct_AR" >&6
1.27199 ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
1.27200 ++echo "${ECHO_T}$ac_ct_AR" >&6; }
1.27201 + else
1.27202 +- echo "$as_me:$LINENO: result: no" >&5
1.27203 +-echo "${ECHO_T}no" >&6
1.27204 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27205 ++echo "${ECHO_T}no" >&6; }
1.27206 + fi
1.27207 +
1.27208 +- AR=$ac_ct_AR
1.27209 ++ if test "x$ac_ct_AR" = x; then
1.27210 ++ AR="false"
1.27211 ++ else
1.27212 ++ case $cross_compiling:$ac_tool_warned in
1.27213 ++yes:)
1.27214 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.27215 ++whose name does not start with the host triplet. If you think this
1.27216 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.27217 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.27218 ++whose name does not start with the host triplet. If you think this
1.27219 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.27220 ++ac_tool_warned=yes ;;
1.27221 ++esac
1.27222 ++ AR=$ac_ct_AR
1.27223 ++ fi
1.27224 + else
1.27225 + AR="$ac_cv_prog_AR"
1.27226 + fi
1.27227 +@@ -5443,8 +6442,8 @@
1.27228 + if test -n "$ac_tool_prefix"; then
1.27229 + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
1.27230 + set dummy ${ac_tool_prefix}strip; ac_word=$2
1.27231 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27232 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27233 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27234 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27235 + if test "${ac_cv_prog_STRIP+set}" = set; then
1.27236 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27237 + else
1.27238 +@@ -5457,32 +6456,34 @@
1.27239 + IFS=$as_save_IFS
1.27240 + test -z "$as_dir" && as_dir=.
1.27241 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27242 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27243 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27244 + ac_cv_prog_STRIP="${ac_tool_prefix}strip"
1.27245 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27246 + break 2
1.27247 + fi
1.27248 + done
1.27249 + done
1.27250 ++IFS=$as_save_IFS
1.27251 +
1.27252 + fi
1.27253 + fi
1.27254 + STRIP=$ac_cv_prog_STRIP
1.27255 + if test -n "$STRIP"; then
1.27256 +- echo "$as_me:$LINENO: result: $STRIP" >&5
1.27257 +-echo "${ECHO_T}$STRIP" >&6
1.27258 ++ { echo "$as_me:$LINENO: result: $STRIP" >&5
1.27259 ++echo "${ECHO_T}$STRIP" >&6; }
1.27260 + else
1.27261 +- echo "$as_me:$LINENO: result: no" >&5
1.27262 +-echo "${ECHO_T}no" >&6
1.27263 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27264 ++echo "${ECHO_T}no" >&6; }
1.27265 + fi
1.27266 +
1.27267 ++
1.27268 + fi
1.27269 + if test -z "$ac_cv_prog_STRIP"; then
1.27270 + ac_ct_STRIP=$STRIP
1.27271 + # Extract the first word of "strip", so it can be a program name with args.
1.27272 + set dummy strip; ac_word=$2
1.27273 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27274 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27275 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27276 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27277 + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
1.27278 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27279 + else
1.27280 +@@ -5495,27 +6496,41 @@
1.27281 + IFS=$as_save_IFS
1.27282 + test -z "$as_dir" && as_dir=.
1.27283 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27284 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27285 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27286 + ac_cv_prog_ac_ct_STRIP="strip"
1.27287 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27288 + break 2
1.27289 + fi
1.27290 + done
1.27291 + done
1.27292 ++IFS=$as_save_IFS
1.27293 +
1.27294 +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
1.27295 + fi
1.27296 + fi
1.27297 + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
1.27298 + if test -n "$ac_ct_STRIP"; then
1.27299 +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
1.27300 +-echo "${ECHO_T}$ac_ct_STRIP" >&6
1.27301 ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
1.27302 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; }
1.27303 + else
1.27304 +- echo "$as_me:$LINENO: result: no" >&5
1.27305 +-echo "${ECHO_T}no" >&6
1.27306 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27307 ++echo "${ECHO_T}no" >&6; }
1.27308 + fi
1.27309 +
1.27310 +- STRIP=$ac_ct_STRIP
1.27311 ++ if test "x$ac_ct_STRIP" = x; then
1.27312 ++ STRIP=":"
1.27313 ++ else
1.27314 ++ case $cross_compiling:$ac_tool_warned in
1.27315 ++yes:)
1.27316 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.27317 ++whose name does not start with the host triplet. If you think this
1.27318 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.27319 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.27320 ++whose name does not start with the host triplet. If you think this
1.27321 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.27322 ++ac_tool_warned=yes ;;
1.27323 ++esac
1.27324 ++ STRIP=$ac_ct_STRIP
1.27325 ++ fi
1.27326 + else
1.27327 + STRIP="$ac_cv_prog_STRIP"
1.27328 + fi
1.27329 +@@ -5530,8 +6545,8 @@
1.27330 + if test -n "$ac_tool_prefix"; then
1.27331 + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
1.27332 + set dummy ${ac_tool_prefix}ranlib; ac_word=$2
1.27333 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27334 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27335 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27336 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27337 + if test "${ac_cv_prog_RANLIB+set}" = set; then
1.27338 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27339 + else
1.27340 +@@ -5544,32 +6559,34 @@
1.27341 + IFS=$as_save_IFS
1.27342 + test -z "$as_dir" && as_dir=.
1.27343 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27344 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27345 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27346 + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
1.27347 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27348 + break 2
1.27349 + fi
1.27350 + done
1.27351 + done
1.27352 ++IFS=$as_save_IFS
1.27353 +
1.27354 + fi
1.27355 + fi
1.27356 + RANLIB=$ac_cv_prog_RANLIB
1.27357 + if test -n "$RANLIB"; then
1.27358 +- echo "$as_me:$LINENO: result: $RANLIB" >&5
1.27359 +-echo "${ECHO_T}$RANLIB" >&6
1.27360 ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5
1.27361 ++echo "${ECHO_T}$RANLIB" >&6; }
1.27362 + else
1.27363 +- echo "$as_me:$LINENO: result: no" >&5
1.27364 +-echo "${ECHO_T}no" >&6
1.27365 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27366 ++echo "${ECHO_T}no" >&6; }
1.27367 + fi
1.27368 +
1.27369 ++
1.27370 + fi
1.27371 + if test -z "$ac_cv_prog_RANLIB"; then
1.27372 + ac_ct_RANLIB=$RANLIB
1.27373 + # Extract the first word of "ranlib", so it can be a program name with args.
1.27374 + set dummy ranlib; ac_word=$2
1.27375 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27376 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27377 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27378 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27379 + if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
1.27380 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27381 + else
1.27382 +@@ -5582,27 +6599,41 @@
1.27383 + IFS=$as_save_IFS
1.27384 + test -z "$as_dir" && as_dir=.
1.27385 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27386 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27387 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27388 + ac_cv_prog_ac_ct_RANLIB="ranlib"
1.27389 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27390 + break 2
1.27391 + fi
1.27392 + done
1.27393 + done
1.27394 ++IFS=$as_save_IFS
1.27395 +
1.27396 +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
1.27397 + fi
1.27398 + fi
1.27399 + ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
1.27400 + if test -n "$ac_ct_RANLIB"; then
1.27401 +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.27402 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6
1.27403 ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
1.27404 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
1.27405 + else
1.27406 +- echo "$as_me:$LINENO: result: no" >&5
1.27407 +-echo "${ECHO_T}no" >&6
1.27408 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27409 ++echo "${ECHO_T}no" >&6; }
1.27410 + fi
1.27411 +
1.27412 +- RANLIB=$ac_ct_RANLIB
1.27413 ++ if test "x$ac_ct_RANLIB" = x; then
1.27414 ++ RANLIB=":"
1.27415 ++ else
1.27416 ++ case $cross_compiling:$ac_tool_warned in
1.27417 ++yes:)
1.27418 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.27419 ++whose name does not start with the host triplet. If you think this
1.27420 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.27421 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.27422 ++whose name does not start with the host triplet. If you think this
1.27423 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.27424 ++ac_tool_warned=yes ;;
1.27425 ++esac
1.27426 ++ RANLIB=$ac_ct_RANLIB
1.27427 ++ fi
1.27428 + else
1.27429 + RANLIB="$ac_cv_prog_RANLIB"
1.27430 + fi
1.27431 +@@ -5675,8 +6706,8 @@
1.27432 +
1.27433 +
1.27434 + # Check for command to grab the raw symbol name followed by C symbol from nm.
1.27435 +-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
1.27436 +-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
1.27437 ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
1.27438 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
1.27439 + if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
1.27440 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27441 + else
1.27442 +@@ -5895,11 +6926,11 @@
1.27443 + lt_cv_sys_global_symbol_to_cdecl=
1.27444 + fi
1.27445 + if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
1.27446 +- echo "$as_me:$LINENO: result: failed" >&5
1.27447 +-echo "${ECHO_T}failed" >&6
1.27448 ++ { echo "$as_me:$LINENO: result: failed" >&5
1.27449 ++echo "${ECHO_T}failed" >&6; }
1.27450 + else
1.27451 +- echo "$as_me:$LINENO: result: ok" >&5
1.27452 +-echo "${ECHO_T}ok" >&6
1.27453 ++ { echo "$as_me:$LINENO: result: ok" >&5
1.27454 ++echo "${ECHO_T}ok" >&6; }
1.27455 + fi
1.27456 +
1.27457 +
1.27458 +@@ -5924,11 +6955,11 @@
1.27459 +
1.27460 +
1.27461 +
1.27462 +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
1.27463 ++# Check whether --enable-libtool-lock was given.
1.27464 + if test "${enable_libtool_lock+set}" = set; then
1.27465 +- enableval="$enable_libtool_lock"
1.27466 ++ enableval=$enable_libtool_lock;
1.27467 ++fi
1.27468 +
1.27469 +-fi;
1.27470 + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
1.27471 +
1.27472 + # Some flags need to be propagated to the compiler or linker for good
1.27473 +@@ -5955,7 +6986,7 @@
1.27474 + ;;
1.27475 + *-*-irix6*)
1.27476 + # Find out which ABI we are using.
1.27477 +- echo '#line 5958 "configure"' > conftest.$ac_ext
1.27478 ++ echo '#line 6989 "configure"' > conftest.$ac_ext
1.27479 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.27480 + (eval $ac_compile) 2>&5
1.27481 + ac_status=$?
1.27482 +@@ -6047,8 +7078,8 @@
1.27483 + # On SCO OpenServer 5, we need -belf to get full-featured binaries.
1.27484 + SAVE_CFLAGS="$CFLAGS"
1.27485 + CFLAGS="$CFLAGS -belf"
1.27486 +- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
1.27487 +-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
1.27488 ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
1.27489 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
1.27490 + if test "${lt_cv_cc_needs_belf+set}" = set; then
1.27491 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27492 + else
1.27493 +@@ -6074,35 +7105,32 @@
1.27494 + }
1.27495 + _ACEOF
1.27496 + rm -f conftest.$ac_objext conftest$ac_exeext
1.27497 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.27498 +- (eval $ac_link) 2>conftest.er1
1.27499 ++if { (ac_try="$ac_link"
1.27500 ++case "(($ac_try" in
1.27501 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.27502 ++ *) ac_try_echo=$ac_try;;
1.27503 ++esac
1.27504 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.27505 ++ (eval "$ac_link") 2>conftest.er1
1.27506 + ac_status=$?
1.27507 + grep -v '^ *+' conftest.er1 >conftest.err
1.27508 + rm -f conftest.er1
1.27509 + cat conftest.err >&5
1.27510 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.27511 +- (exit $ac_status); } &&
1.27512 +- { ac_try='test -z "$ac_c_werror_flag"
1.27513 +- || test ! -s conftest.err'
1.27514 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.27515 +- (eval $ac_try) 2>&5
1.27516 +- ac_status=$?
1.27517 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.27518 +- (exit $ac_status); }; } &&
1.27519 +- { ac_try='test -s conftest$ac_exeext'
1.27520 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.27521 +- (eval $ac_try) 2>&5
1.27522 +- ac_status=$?
1.27523 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.27524 +- (exit $ac_status); }; }; then
1.27525 ++ (exit $ac_status); } && {
1.27526 ++ test -z "$ac_c_werror_flag" ||
1.27527 ++ test ! -s conftest.err
1.27528 ++ } && test -s conftest$ac_exeext &&
1.27529 ++ $as_test_x conftest$ac_exeext; then
1.27530 + lt_cv_cc_needs_belf=yes
1.27531 + else
1.27532 + echo "$as_me: failed program was:" >&5
1.27533 + sed 's/^/| /' conftest.$ac_ext >&5
1.27534 +
1.27535 +-lt_cv_cc_needs_belf=no
1.27536 ++ lt_cv_cc_needs_belf=no
1.27537 + fi
1.27538 +-rm -f conftest.err conftest.$ac_objext \
1.27539 ++
1.27540 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.27541 + conftest$ac_exeext conftest.$ac_ext
1.27542 + ac_ext=c
1.27543 + ac_cpp='$CPP $CPPFLAGS'
1.27544 +@@ -6111,8 +7139,8 @@
1.27545 + ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.27546 +
1.27547 + fi
1.27548 +-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
1.27549 +-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
1.27550 ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
1.27551 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
1.27552 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then
1.27553 + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
1.27554 + CFLAGS="$SAVE_CFLAGS"
1.27555 +@@ -6151,8 +7179,8 @@
1.27556 + if test -n "$ac_tool_prefix"; then
1.27557 + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
1.27558 + set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
1.27559 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27560 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27561 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27562 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27563 + if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
1.27564 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27565 + else
1.27566 +@@ -6165,32 +7193,34 @@
1.27567 + IFS=$as_save_IFS
1.27568 + test -z "$as_dir" && as_dir=.
1.27569 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27570 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27571 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27572 + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
1.27573 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27574 + break 2
1.27575 + fi
1.27576 + done
1.27577 + done
1.27578 ++IFS=$as_save_IFS
1.27579 +
1.27580 + fi
1.27581 + fi
1.27582 + DSYMUTIL=$ac_cv_prog_DSYMUTIL
1.27583 + if test -n "$DSYMUTIL"; then
1.27584 +- echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
1.27585 +-echo "${ECHO_T}$DSYMUTIL" >&6
1.27586 ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
1.27587 ++echo "${ECHO_T}$DSYMUTIL" >&6; }
1.27588 + else
1.27589 +- echo "$as_me:$LINENO: result: no" >&5
1.27590 +-echo "${ECHO_T}no" >&6
1.27591 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27592 ++echo "${ECHO_T}no" >&6; }
1.27593 + fi
1.27594 +
1.27595 ++
1.27596 + fi
1.27597 + if test -z "$ac_cv_prog_DSYMUTIL"; then
1.27598 + ac_ct_DSYMUTIL=$DSYMUTIL
1.27599 + # Extract the first word of "dsymutil", so it can be a program name with args.
1.27600 + set dummy dsymutil; ac_word=$2
1.27601 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27602 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27603 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27604 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27605 + if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
1.27606 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27607 + else
1.27608 +@@ -6203,27 +7233,41 @@
1.27609 + IFS=$as_save_IFS
1.27610 + test -z "$as_dir" && as_dir=.
1.27611 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27612 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27613 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27614 + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
1.27615 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27616 + break 2
1.27617 + fi
1.27618 + done
1.27619 + done
1.27620 ++IFS=$as_save_IFS
1.27621 +
1.27622 +- test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":"
1.27623 + fi
1.27624 + fi
1.27625 + ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
1.27626 + if test -n "$ac_ct_DSYMUTIL"; then
1.27627 +- echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
1.27628 +-echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6
1.27629 ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
1.27630 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
1.27631 + else
1.27632 +- echo "$as_me:$LINENO: result: no" >&5
1.27633 +-echo "${ECHO_T}no" >&6
1.27634 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27635 ++echo "${ECHO_T}no" >&6; }
1.27636 + fi
1.27637 +
1.27638 +- DSYMUTIL=$ac_ct_DSYMUTIL
1.27639 ++ if test "x$ac_ct_DSYMUTIL" = x; then
1.27640 ++ DSYMUTIL=":"
1.27641 ++ else
1.27642 ++ case $cross_compiling:$ac_tool_warned in
1.27643 ++yes:)
1.27644 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.27645 ++whose name does not start with the host triplet. If you think this
1.27646 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.27647 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.27648 ++whose name does not start with the host triplet. If you think this
1.27649 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.27650 ++ac_tool_warned=yes ;;
1.27651 ++esac
1.27652 ++ DSYMUTIL=$ac_ct_DSYMUTIL
1.27653 ++ fi
1.27654 + else
1.27655 + DSYMUTIL="$ac_cv_prog_DSYMUTIL"
1.27656 + fi
1.27657 +@@ -6231,8 +7275,8 @@
1.27658 + if test -n "$ac_tool_prefix"; then
1.27659 + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
1.27660 + set dummy ${ac_tool_prefix}nmedit; ac_word=$2
1.27661 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27662 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27663 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27664 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27665 + if test "${ac_cv_prog_NMEDIT+set}" = set; then
1.27666 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27667 + else
1.27668 +@@ -6245,32 +7289,34 @@
1.27669 + IFS=$as_save_IFS
1.27670 + test -z "$as_dir" && as_dir=.
1.27671 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27672 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27673 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27674 + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
1.27675 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27676 + break 2
1.27677 + fi
1.27678 + done
1.27679 + done
1.27680 ++IFS=$as_save_IFS
1.27681 +
1.27682 + fi
1.27683 + fi
1.27684 + NMEDIT=$ac_cv_prog_NMEDIT
1.27685 + if test -n "$NMEDIT"; then
1.27686 +- echo "$as_me:$LINENO: result: $NMEDIT" >&5
1.27687 +-echo "${ECHO_T}$NMEDIT" >&6
1.27688 ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5
1.27689 ++echo "${ECHO_T}$NMEDIT" >&6; }
1.27690 + else
1.27691 +- echo "$as_me:$LINENO: result: no" >&5
1.27692 +-echo "${ECHO_T}no" >&6
1.27693 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27694 ++echo "${ECHO_T}no" >&6; }
1.27695 + fi
1.27696 +
1.27697 ++
1.27698 + fi
1.27699 + if test -z "$ac_cv_prog_NMEDIT"; then
1.27700 + ac_ct_NMEDIT=$NMEDIT
1.27701 + # Extract the first word of "nmedit", so it can be a program name with args.
1.27702 + set dummy nmedit; ac_word=$2
1.27703 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27704 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27705 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27706 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27707 + if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
1.27708 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27709 + else
1.27710 +@@ -6283,27 +7329,41 @@
1.27711 + IFS=$as_save_IFS
1.27712 + test -z "$as_dir" && as_dir=.
1.27713 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27714 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27715 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27716 + ac_cv_prog_ac_ct_NMEDIT="nmedit"
1.27717 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27718 + break 2
1.27719 + fi
1.27720 + done
1.27721 + done
1.27722 ++IFS=$as_save_IFS
1.27723 +
1.27724 +- test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":"
1.27725 + fi
1.27726 + fi
1.27727 + ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
1.27728 + if test -n "$ac_ct_NMEDIT"; then
1.27729 +- echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
1.27730 +-echo "${ECHO_T}$ac_ct_NMEDIT" >&6
1.27731 ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
1.27732 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
1.27733 + else
1.27734 +- echo "$as_me:$LINENO: result: no" >&5
1.27735 +-echo "${ECHO_T}no" >&6
1.27736 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27737 ++echo "${ECHO_T}no" >&6; }
1.27738 + fi
1.27739 +
1.27740 +- NMEDIT=$ac_ct_NMEDIT
1.27741 ++ if test "x$ac_ct_NMEDIT" = x; then
1.27742 ++ NMEDIT=":"
1.27743 ++ else
1.27744 ++ case $cross_compiling:$ac_tool_warned in
1.27745 ++yes:)
1.27746 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.27747 ++whose name does not start with the host triplet. If you think this
1.27748 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.27749 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.27750 ++whose name does not start with the host triplet. If you think this
1.27751 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.27752 ++ac_tool_warned=yes ;;
1.27753 ++esac
1.27754 ++ NMEDIT=$ac_ct_NMEDIT
1.27755 ++ fi
1.27756 + else
1.27757 + NMEDIT="$ac_cv_prog_NMEDIT"
1.27758 + fi
1.27759 +@@ -6311,8 +7371,8 @@
1.27760 + if test -n "$ac_tool_prefix"; then
1.27761 + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
1.27762 + set dummy ${ac_tool_prefix}lipo; ac_word=$2
1.27763 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27764 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27765 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27766 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27767 + if test "${ac_cv_prog_LIPO+set}" = set; then
1.27768 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27769 + else
1.27770 +@@ -6325,32 +7385,34 @@
1.27771 + IFS=$as_save_IFS
1.27772 + test -z "$as_dir" && as_dir=.
1.27773 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27774 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27775 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27776 + ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
1.27777 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27778 + break 2
1.27779 + fi
1.27780 + done
1.27781 + done
1.27782 ++IFS=$as_save_IFS
1.27783 +
1.27784 + fi
1.27785 + fi
1.27786 + LIPO=$ac_cv_prog_LIPO
1.27787 + if test -n "$LIPO"; then
1.27788 +- echo "$as_me:$LINENO: result: $LIPO" >&5
1.27789 +-echo "${ECHO_T}$LIPO" >&6
1.27790 ++ { echo "$as_me:$LINENO: result: $LIPO" >&5
1.27791 ++echo "${ECHO_T}$LIPO" >&6; }
1.27792 + else
1.27793 +- echo "$as_me:$LINENO: result: no" >&5
1.27794 +-echo "${ECHO_T}no" >&6
1.27795 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27796 ++echo "${ECHO_T}no" >&6; }
1.27797 + fi
1.27798 +
1.27799 ++
1.27800 + fi
1.27801 + if test -z "$ac_cv_prog_LIPO"; then
1.27802 + ac_ct_LIPO=$LIPO
1.27803 + # Extract the first word of "lipo", so it can be a program name with args.
1.27804 + set dummy lipo; ac_word=$2
1.27805 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27806 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27807 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27808 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27809 + if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
1.27810 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27811 + else
1.27812 +@@ -6363,27 +7425,41 @@
1.27813 + IFS=$as_save_IFS
1.27814 + test -z "$as_dir" && as_dir=.
1.27815 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27816 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27817 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27818 + ac_cv_prog_ac_ct_LIPO="lipo"
1.27819 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27820 + break 2
1.27821 + fi
1.27822 + done
1.27823 + done
1.27824 ++IFS=$as_save_IFS
1.27825 +
1.27826 +- test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":"
1.27827 + fi
1.27828 + fi
1.27829 + ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
1.27830 + if test -n "$ac_ct_LIPO"; then
1.27831 +- echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
1.27832 +-echo "${ECHO_T}$ac_ct_LIPO" >&6
1.27833 ++ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
1.27834 ++echo "${ECHO_T}$ac_ct_LIPO" >&6; }
1.27835 + else
1.27836 +- echo "$as_me:$LINENO: result: no" >&5
1.27837 +-echo "${ECHO_T}no" >&6
1.27838 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27839 ++echo "${ECHO_T}no" >&6; }
1.27840 + fi
1.27841 +
1.27842 +- LIPO=$ac_ct_LIPO
1.27843 ++ if test "x$ac_ct_LIPO" = x; then
1.27844 ++ LIPO=":"
1.27845 ++ else
1.27846 ++ case $cross_compiling:$ac_tool_warned in
1.27847 ++yes:)
1.27848 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.27849 ++whose name does not start with the host triplet. If you think this
1.27850 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.27851 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.27852 ++whose name does not start with the host triplet. If you think this
1.27853 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.27854 ++ac_tool_warned=yes ;;
1.27855 ++esac
1.27856 ++ LIPO=$ac_ct_LIPO
1.27857 ++ fi
1.27858 + else
1.27859 + LIPO="$ac_cv_prog_LIPO"
1.27860 + fi
1.27861 +@@ -6391,8 +7467,8 @@
1.27862 + if test -n "$ac_tool_prefix"; then
1.27863 + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
1.27864 + set dummy ${ac_tool_prefix}otool; ac_word=$2
1.27865 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27866 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27867 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27868 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27869 + if test "${ac_cv_prog_OTOOL+set}" = set; then
1.27870 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27871 + else
1.27872 +@@ -6405,32 +7481,34 @@
1.27873 + IFS=$as_save_IFS
1.27874 + test -z "$as_dir" && as_dir=.
1.27875 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27876 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27877 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27878 + ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
1.27879 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27880 + break 2
1.27881 + fi
1.27882 + done
1.27883 + done
1.27884 ++IFS=$as_save_IFS
1.27885 +
1.27886 + fi
1.27887 + fi
1.27888 + OTOOL=$ac_cv_prog_OTOOL
1.27889 + if test -n "$OTOOL"; then
1.27890 +- echo "$as_me:$LINENO: result: $OTOOL" >&5
1.27891 +-echo "${ECHO_T}$OTOOL" >&6
1.27892 ++ { echo "$as_me:$LINENO: result: $OTOOL" >&5
1.27893 ++echo "${ECHO_T}$OTOOL" >&6; }
1.27894 + else
1.27895 +- echo "$as_me:$LINENO: result: no" >&5
1.27896 +-echo "${ECHO_T}no" >&6
1.27897 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27898 ++echo "${ECHO_T}no" >&6; }
1.27899 + fi
1.27900 +
1.27901 ++
1.27902 + fi
1.27903 + if test -z "$ac_cv_prog_OTOOL"; then
1.27904 + ac_ct_OTOOL=$OTOOL
1.27905 + # Extract the first word of "otool", so it can be a program name with args.
1.27906 + set dummy otool; ac_word=$2
1.27907 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27908 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27909 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27910 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27911 + if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
1.27912 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27913 + else
1.27914 +@@ -6443,27 +7521,41 @@
1.27915 + IFS=$as_save_IFS
1.27916 + test -z "$as_dir" && as_dir=.
1.27917 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27918 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27919 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27920 + ac_cv_prog_ac_ct_OTOOL="otool"
1.27921 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27922 + break 2
1.27923 + fi
1.27924 + done
1.27925 + done
1.27926 ++IFS=$as_save_IFS
1.27927 +
1.27928 +- test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":"
1.27929 + fi
1.27930 + fi
1.27931 + ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
1.27932 + if test -n "$ac_ct_OTOOL"; then
1.27933 +- echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
1.27934 +-echo "${ECHO_T}$ac_ct_OTOOL" >&6
1.27935 ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
1.27936 ++echo "${ECHO_T}$ac_ct_OTOOL" >&6; }
1.27937 + else
1.27938 +- echo "$as_me:$LINENO: result: no" >&5
1.27939 +-echo "${ECHO_T}no" >&6
1.27940 ++ { echo "$as_me:$LINENO: result: no" >&5
1.27941 ++echo "${ECHO_T}no" >&6; }
1.27942 + fi
1.27943 +
1.27944 +- OTOOL=$ac_ct_OTOOL
1.27945 ++ if test "x$ac_ct_OTOOL" = x; then
1.27946 ++ OTOOL=":"
1.27947 ++ else
1.27948 ++ case $cross_compiling:$ac_tool_warned in
1.27949 ++yes:)
1.27950 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.27951 ++whose name does not start with the host triplet. If you think this
1.27952 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.27953 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.27954 ++whose name does not start with the host triplet. If you think this
1.27955 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.27956 ++ac_tool_warned=yes ;;
1.27957 ++esac
1.27958 ++ OTOOL=$ac_ct_OTOOL
1.27959 ++ fi
1.27960 + else
1.27961 + OTOOL="$ac_cv_prog_OTOOL"
1.27962 + fi
1.27963 +@@ -6471,8 +7563,8 @@
1.27964 + if test -n "$ac_tool_prefix"; then
1.27965 + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
1.27966 + set dummy ${ac_tool_prefix}otool64; ac_word=$2
1.27967 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27968 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.27969 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.27970 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.27971 + if test "${ac_cv_prog_OTOOL64+set}" = set; then
1.27972 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.27973 + else
1.27974 +@@ -6485,32 +7577,34 @@
1.27975 + IFS=$as_save_IFS
1.27976 + test -z "$as_dir" && as_dir=.
1.27977 + for ac_exec_ext in '' $ac_executable_extensions; do
1.27978 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.27979 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.27980 + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
1.27981 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.27982 + break 2
1.27983 + fi
1.27984 + done
1.27985 + done
1.27986 ++IFS=$as_save_IFS
1.27987 +
1.27988 + fi
1.27989 + fi
1.27990 + OTOOL64=$ac_cv_prog_OTOOL64
1.27991 + if test -n "$OTOOL64"; then
1.27992 +- echo "$as_me:$LINENO: result: $OTOOL64" >&5
1.27993 +-echo "${ECHO_T}$OTOOL64" >&6
1.27994 ++ { echo "$as_me:$LINENO: result: $OTOOL64" >&5
1.27995 ++echo "${ECHO_T}$OTOOL64" >&6; }
1.27996 + else
1.27997 +- echo "$as_me:$LINENO: result: no" >&5
1.27998 +-echo "${ECHO_T}no" >&6
1.27999 ++ { echo "$as_me:$LINENO: result: no" >&5
1.28000 ++echo "${ECHO_T}no" >&6; }
1.28001 + fi
1.28002 +
1.28003 ++
1.28004 + fi
1.28005 + if test -z "$ac_cv_prog_OTOOL64"; then
1.28006 + ac_ct_OTOOL64=$OTOOL64
1.28007 + # Extract the first word of "otool64", so it can be a program name with args.
1.28008 + set dummy otool64; ac_word=$2
1.28009 +-echo "$as_me:$LINENO: checking for $ac_word" >&5
1.28010 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1.28011 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5
1.28012 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
1.28013 + if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
1.28014 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28015 + else
1.28016 +@@ -6523,27 +7617,41 @@
1.28017 + IFS=$as_save_IFS
1.28018 + test -z "$as_dir" && as_dir=.
1.28019 + for ac_exec_ext in '' $ac_executable_extensions; do
1.28020 +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1.28021 ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
1.28022 + ac_cv_prog_ac_ct_OTOOL64="otool64"
1.28023 + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1.28024 + break 2
1.28025 + fi
1.28026 + done
1.28027 + done
1.28028 ++IFS=$as_save_IFS
1.28029 +
1.28030 +- test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":"
1.28031 + fi
1.28032 + fi
1.28033 + ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
1.28034 + if test -n "$ac_ct_OTOOL64"; then
1.28035 +- echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
1.28036 +-echo "${ECHO_T}$ac_ct_OTOOL64" >&6
1.28037 ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
1.28038 ++echo "${ECHO_T}$ac_ct_OTOOL64" >&6; }
1.28039 + else
1.28040 +- echo "$as_me:$LINENO: result: no" >&5
1.28041 +-echo "${ECHO_T}no" >&6
1.28042 ++ { echo "$as_me:$LINENO: result: no" >&5
1.28043 ++echo "${ECHO_T}no" >&6; }
1.28044 + fi
1.28045 +
1.28046 +- OTOOL64=$ac_ct_OTOOL64
1.28047 ++ if test "x$ac_ct_OTOOL64" = x; then
1.28048 ++ OTOOL64=":"
1.28049 ++ else
1.28050 ++ case $cross_compiling:$ac_tool_warned in
1.28051 ++yes:)
1.28052 ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
1.28053 ++whose name does not start with the host triplet. If you think this
1.28054 ++configuration is useful to you, please write to autoconf@gnu.org." >&5
1.28055 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
1.28056 ++whose name does not start with the host triplet. If you think this
1.28057 ++configuration is useful to you, please write to autoconf@gnu.org." >&2;}
1.28058 ++ac_tool_warned=yes ;;
1.28059 ++esac
1.28060 ++ OTOOL64=$ac_ct_OTOOL64
1.28061 ++ fi
1.28062 + else
1.28063 + OTOOL64="$ac_cv_prog_OTOOL64"
1.28064 + fi
1.28065 +@@ -6574,8 +7682,8 @@
1.28066 +
1.28067 +
1.28068 +
1.28069 +- echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
1.28070 +-echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6
1.28071 ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
1.28072 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
1.28073 + if test "${lt_cv_apple_cc_single_mod+set}" = set; then
1.28074 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28075 + else
1.28076 +@@ -6601,10 +7709,10 @@
1.28077 + rm -f conftest.*
1.28078 + fi
1.28079 + fi
1.28080 +-echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
1.28081 +-echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6
1.28082 +- echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
1.28083 +-echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6
1.28084 ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
1.28085 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
1.28086 ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
1.28087 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
1.28088 + if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
1.28089 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28090 + else
1.28091 +@@ -6628,41 +7736,38 @@
1.28092 + }
1.28093 + _ACEOF
1.28094 + rm -f conftest.$ac_objext conftest$ac_exeext
1.28095 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.28096 +- (eval $ac_link) 2>conftest.er1
1.28097 ++if { (ac_try="$ac_link"
1.28098 ++case "(($ac_try" in
1.28099 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28100 ++ *) ac_try_echo=$ac_try;;
1.28101 ++esac
1.28102 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28103 ++ (eval "$ac_link") 2>conftest.er1
1.28104 + ac_status=$?
1.28105 + grep -v '^ *+' conftest.er1 >conftest.err
1.28106 + rm -f conftest.er1
1.28107 + cat conftest.err >&5
1.28108 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28109 +- (exit $ac_status); } &&
1.28110 +- { ac_try='test -z "$ac_c_werror_flag"
1.28111 +- || test ! -s conftest.err'
1.28112 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28113 +- (eval $ac_try) 2>&5
1.28114 +- ac_status=$?
1.28115 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28116 +- (exit $ac_status); }; } &&
1.28117 +- { ac_try='test -s conftest$ac_exeext'
1.28118 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28119 +- (eval $ac_try) 2>&5
1.28120 +- ac_status=$?
1.28121 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28122 +- (exit $ac_status); }; }; then
1.28123 ++ (exit $ac_status); } && {
1.28124 ++ test -z "$ac_c_werror_flag" ||
1.28125 ++ test ! -s conftest.err
1.28126 ++ } && test -s conftest$ac_exeext &&
1.28127 ++ $as_test_x conftest$ac_exeext; then
1.28128 + lt_cv_ld_exported_symbols_list=yes
1.28129 + else
1.28130 + echo "$as_me: failed program was:" >&5
1.28131 + sed 's/^/| /' conftest.$ac_ext >&5
1.28132 +
1.28133 +-lt_cv_ld_exported_symbols_list=no
1.28134 ++ lt_cv_ld_exported_symbols_list=no
1.28135 + fi
1.28136 +-rm -f conftest.err conftest.$ac_objext \
1.28137 ++
1.28138 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.28139 + conftest$ac_exeext conftest.$ac_ext
1.28140 + LDFLAGS="$save_LDFLAGS"
1.28141 +
1.28142 + fi
1.28143 +-echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
1.28144 +-echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6
1.28145 ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
1.28146 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
1.28147 + case $host_os in
1.28148 + rhapsody* | darwin1.[012])
1.28149 + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
1.28150 +@@ -6703,8 +7808,8 @@
1.28151 + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1.28152 + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1.28153 + ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.28154 +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
1.28155 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
1.28156 ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
1.28157 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
1.28158 + # On Suns, sometimes $CPP names a directory.
1.28159 + if test -n "$CPP" && test -d "$CPP"; then
1.28160 + CPP=
1.28161 +@@ -6738,24 +7843,22 @@
1.28162 + #endif
1.28163 + Syntax error
1.28164 + _ACEOF
1.28165 +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
1.28166 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
1.28167 ++if { (ac_try="$ac_cpp conftest.$ac_ext"
1.28168 ++case "(($ac_try" in
1.28169 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28170 ++ *) ac_try_echo=$ac_try;;
1.28171 ++esac
1.28172 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28173 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
1.28174 + ac_status=$?
1.28175 + grep -v '^ *+' conftest.er1 >conftest.err
1.28176 + rm -f conftest.er1
1.28177 + cat conftest.err >&5
1.28178 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28179 +- (exit $ac_status); } >/dev/null; then
1.28180 +- if test -s conftest.err; then
1.28181 +- ac_cpp_err=$ac_c_preproc_warn_flag
1.28182 +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
1.28183 +- else
1.28184 +- ac_cpp_err=
1.28185 +- fi
1.28186 +-else
1.28187 +- ac_cpp_err=yes
1.28188 +-fi
1.28189 +-if test -z "$ac_cpp_err"; then
1.28190 ++ (exit $ac_status); } >/dev/null && {
1.28191 ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
1.28192 ++ test ! -s conftest.err
1.28193 ++ }; then
1.28194 + :
1.28195 + else
1.28196 + echo "$as_me: failed program was:" >&5
1.28197 +@@ -6764,9 +7867,10 @@
1.28198 + # Broken: fails on valid input.
1.28199 + continue
1.28200 + fi
1.28201 ++
1.28202 + rm -f conftest.err conftest.$ac_ext
1.28203 +
1.28204 +- # OK, works on sane cases. Now check whether non-existent headers
1.28205 ++ # OK, works on sane cases. Now check whether nonexistent headers
1.28206 + # can be detected and how.
1.28207 + cat >conftest.$ac_ext <<_ACEOF
1.28208 + /* confdefs.h. */
1.28209 +@@ -6776,24 +7880,22 @@
1.28210 + /* end confdefs.h. */
1.28211 + #include <ac_nonexistent.h>
1.28212 + _ACEOF
1.28213 +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
1.28214 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
1.28215 ++if { (ac_try="$ac_cpp conftest.$ac_ext"
1.28216 ++case "(($ac_try" in
1.28217 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28218 ++ *) ac_try_echo=$ac_try;;
1.28219 ++esac
1.28220 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28221 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
1.28222 + ac_status=$?
1.28223 + grep -v '^ *+' conftest.er1 >conftest.err
1.28224 + rm -f conftest.er1
1.28225 + cat conftest.err >&5
1.28226 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28227 +- (exit $ac_status); } >/dev/null; then
1.28228 +- if test -s conftest.err; then
1.28229 +- ac_cpp_err=$ac_c_preproc_warn_flag
1.28230 +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
1.28231 +- else
1.28232 +- ac_cpp_err=
1.28233 +- fi
1.28234 +-else
1.28235 +- ac_cpp_err=yes
1.28236 +-fi
1.28237 +-if test -z "$ac_cpp_err"; then
1.28238 ++ (exit $ac_status); } >/dev/null && {
1.28239 ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
1.28240 ++ test ! -s conftest.err
1.28241 ++ }; then
1.28242 + # Broken: success on invalid input.
1.28243 + continue
1.28244 + else
1.28245 +@@ -6804,6 +7906,7 @@
1.28246 + ac_preproc_ok=:
1.28247 + break
1.28248 + fi
1.28249 ++
1.28250 + rm -f conftest.err conftest.$ac_ext
1.28251 +
1.28252 + done
1.28253 +@@ -6821,8 +7924,8 @@
1.28254 + else
1.28255 + ac_cv_prog_CPP=$CPP
1.28256 + fi
1.28257 +-echo "$as_me:$LINENO: result: $CPP" >&5
1.28258 +-echo "${ECHO_T}$CPP" >&6
1.28259 ++{ echo "$as_me:$LINENO: result: $CPP" >&5
1.28260 ++echo "${ECHO_T}$CPP" >&6; }
1.28261 + ac_preproc_ok=false
1.28262 + for ac_c_preproc_warn_flag in '' yes
1.28263 + do
1.28264 +@@ -6845,24 +7948,22 @@
1.28265 + #endif
1.28266 + Syntax error
1.28267 + _ACEOF
1.28268 +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
1.28269 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
1.28270 ++if { (ac_try="$ac_cpp conftest.$ac_ext"
1.28271 ++case "(($ac_try" in
1.28272 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28273 ++ *) ac_try_echo=$ac_try;;
1.28274 ++esac
1.28275 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28276 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
1.28277 + ac_status=$?
1.28278 + grep -v '^ *+' conftest.er1 >conftest.err
1.28279 + rm -f conftest.er1
1.28280 + cat conftest.err >&5
1.28281 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28282 +- (exit $ac_status); } >/dev/null; then
1.28283 +- if test -s conftest.err; then
1.28284 +- ac_cpp_err=$ac_c_preproc_warn_flag
1.28285 +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
1.28286 +- else
1.28287 +- ac_cpp_err=
1.28288 +- fi
1.28289 +-else
1.28290 +- ac_cpp_err=yes
1.28291 +-fi
1.28292 +-if test -z "$ac_cpp_err"; then
1.28293 ++ (exit $ac_status); } >/dev/null && {
1.28294 ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
1.28295 ++ test ! -s conftest.err
1.28296 ++ }; then
1.28297 + :
1.28298 + else
1.28299 + echo "$as_me: failed program was:" >&5
1.28300 +@@ -6871,9 +7972,10 @@
1.28301 + # Broken: fails on valid input.
1.28302 + continue
1.28303 + fi
1.28304 ++
1.28305 + rm -f conftest.err conftest.$ac_ext
1.28306 +
1.28307 +- # OK, works on sane cases. Now check whether non-existent headers
1.28308 ++ # OK, works on sane cases. Now check whether nonexistent headers
1.28309 + # can be detected and how.
1.28310 + cat >conftest.$ac_ext <<_ACEOF
1.28311 + /* confdefs.h. */
1.28312 +@@ -6883,24 +7985,22 @@
1.28313 + /* end confdefs.h. */
1.28314 + #include <ac_nonexistent.h>
1.28315 + _ACEOF
1.28316 +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
1.28317 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
1.28318 ++if { (ac_try="$ac_cpp conftest.$ac_ext"
1.28319 ++case "(($ac_try" in
1.28320 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28321 ++ *) ac_try_echo=$ac_try;;
1.28322 ++esac
1.28323 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28324 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
1.28325 + ac_status=$?
1.28326 + grep -v '^ *+' conftest.er1 >conftest.err
1.28327 + rm -f conftest.er1
1.28328 + cat conftest.err >&5
1.28329 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28330 +- (exit $ac_status); } >/dev/null; then
1.28331 +- if test -s conftest.err; then
1.28332 +- ac_cpp_err=$ac_c_preproc_warn_flag
1.28333 +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
1.28334 +- else
1.28335 +- ac_cpp_err=
1.28336 +- fi
1.28337 +-else
1.28338 +- ac_cpp_err=yes
1.28339 +-fi
1.28340 +-if test -z "$ac_cpp_err"; then
1.28341 ++ (exit $ac_status); } >/dev/null && {
1.28342 ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
1.28343 ++ test ! -s conftest.err
1.28344 ++ }; then
1.28345 + # Broken: success on invalid input.
1.28346 + continue
1.28347 + else
1.28348 +@@ -6911,6 +8011,7 @@
1.28349 + ac_preproc_ok=:
1.28350 + break
1.28351 + fi
1.28352 ++
1.28353 + rm -f conftest.err conftest.$ac_ext
1.28354 +
1.28355 + done
1.28356 +@@ -6933,8 +8034,8 @@
1.28357 + ac_compiler_gnu=$ac_cv_c_compiler_gnu
1.28358 +
1.28359 +
1.28360 +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
1.28361 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
1.28362 ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
1.28363 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
1.28364 + if test "${ac_cv_header_stdc+set}" = set; then
1.28365 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28366 + else
1.28367 +@@ -6958,35 +8059,31 @@
1.28368 + }
1.28369 + _ACEOF
1.28370 + rm -f conftest.$ac_objext
1.28371 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.28372 +- (eval $ac_compile) 2>conftest.er1
1.28373 ++if { (ac_try="$ac_compile"
1.28374 ++case "(($ac_try" in
1.28375 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28376 ++ *) ac_try_echo=$ac_try;;
1.28377 ++esac
1.28378 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28379 ++ (eval "$ac_compile") 2>conftest.er1
1.28380 + ac_status=$?
1.28381 + grep -v '^ *+' conftest.er1 >conftest.err
1.28382 + rm -f conftest.er1
1.28383 + cat conftest.err >&5
1.28384 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28385 +- (exit $ac_status); } &&
1.28386 +- { ac_try='test -z "$ac_c_werror_flag"
1.28387 +- || test ! -s conftest.err'
1.28388 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28389 +- (eval $ac_try) 2>&5
1.28390 +- ac_status=$?
1.28391 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28392 +- (exit $ac_status); }; } &&
1.28393 +- { ac_try='test -s conftest.$ac_objext'
1.28394 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28395 +- (eval $ac_try) 2>&5
1.28396 +- ac_status=$?
1.28397 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28398 +- (exit $ac_status); }; }; then
1.28399 ++ (exit $ac_status); } && {
1.28400 ++ test -z "$ac_c_werror_flag" ||
1.28401 ++ test ! -s conftest.err
1.28402 ++ } && test -s conftest.$ac_objext; then
1.28403 + ac_cv_header_stdc=yes
1.28404 + else
1.28405 + echo "$as_me: failed program was:" >&5
1.28406 + sed 's/^/| /' conftest.$ac_ext >&5
1.28407 +
1.28408 +-ac_cv_header_stdc=no
1.28409 ++ ac_cv_header_stdc=no
1.28410 + fi
1.28411 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.28412 ++
1.28413 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.28414 +
1.28415 + if test $ac_cv_header_stdc = yes; then
1.28416 + # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
1.28417 +@@ -7042,6 +8139,7 @@
1.28418 + cat >>conftest.$ac_ext <<_ACEOF
1.28419 + /* end confdefs.h. */
1.28420 + #include <ctype.h>
1.28421 ++#include <stdlib.h>
1.28422 + #if ((' ' & 0x0FF) == 0x020)
1.28423 + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
1.28424 + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
1.28425 +@@ -7061,18 +8159,27 @@
1.28426 + for (i = 0; i < 256; i++)
1.28427 + if (XOR (islower (i), ISLOWER (i))
1.28428 + || toupper (i) != TOUPPER (i))
1.28429 +- exit(2);
1.28430 +- exit (0);
1.28431 ++ return 2;
1.28432 ++ return 0;
1.28433 + }
1.28434 + _ACEOF
1.28435 + rm -f conftest$ac_exeext
1.28436 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.28437 +- (eval $ac_link) 2>&5
1.28438 ++if { (ac_try="$ac_link"
1.28439 ++case "(($ac_try" in
1.28440 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28441 ++ *) ac_try_echo=$ac_try;;
1.28442 ++esac
1.28443 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28444 ++ (eval "$ac_link") 2>&5
1.28445 + ac_status=$?
1.28446 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28447 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
1.28448 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28449 +- (eval $ac_try) 2>&5
1.28450 ++ { (case "(($ac_try" in
1.28451 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28452 ++ *) ac_try_echo=$ac_try;;
1.28453 ++esac
1.28454 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28455 ++ (eval "$ac_try") 2>&5
1.28456 + ac_status=$?
1.28457 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28458 + (exit $ac_status); }; }; then
1.28459 +@@ -7085,12 +8192,14 @@
1.28460 + ( exit $ac_status )
1.28461 + ac_cv_header_stdc=no
1.28462 + fi
1.28463 +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
1.28464 ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
1.28465 + fi
1.28466 ++
1.28467 ++
1.28468 + fi
1.28469 + fi
1.28470 +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
1.28471 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6
1.28472 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
1.28473 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
1.28474 + if test $ac_cv_header_stdc = yes; then
1.28475 +
1.28476 + cat >>confdefs.h <<\_ACEOF
1.28477 +@@ -7113,9 +8222,9 @@
1.28478 + inttypes.h stdint.h unistd.h
1.28479 + do
1.28480 + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
1.28481 +-echo "$as_me:$LINENO: checking for $ac_header" >&5
1.28482 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
1.28483 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then
1.28484 ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5
1.28485 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
1.28486 ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
1.28487 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28488 + else
1.28489 + cat >conftest.$ac_ext <<_ACEOF
1.28490 +@@ -7129,38 +8238,35 @@
1.28491 + #include <$ac_header>
1.28492 + _ACEOF
1.28493 + rm -f conftest.$ac_objext
1.28494 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.28495 +- (eval $ac_compile) 2>conftest.er1
1.28496 ++if { (ac_try="$ac_compile"
1.28497 ++case "(($ac_try" in
1.28498 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28499 ++ *) ac_try_echo=$ac_try;;
1.28500 ++esac
1.28501 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28502 ++ (eval "$ac_compile") 2>conftest.er1
1.28503 + ac_status=$?
1.28504 + grep -v '^ *+' conftest.er1 >conftest.err
1.28505 + rm -f conftest.er1
1.28506 + cat conftest.err >&5
1.28507 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28508 +- (exit $ac_status); } &&
1.28509 +- { ac_try='test -z "$ac_c_werror_flag"
1.28510 +- || test ! -s conftest.err'
1.28511 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28512 +- (eval $ac_try) 2>&5
1.28513 +- ac_status=$?
1.28514 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28515 +- (exit $ac_status); }; } &&
1.28516 +- { ac_try='test -s conftest.$ac_objext'
1.28517 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28518 +- (eval $ac_try) 2>&5
1.28519 +- ac_status=$?
1.28520 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28521 +- (exit $ac_status); }; }; then
1.28522 ++ (exit $ac_status); } && {
1.28523 ++ test -z "$ac_c_werror_flag" ||
1.28524 ++ test ! -s conftest.err
1.28525 ++ } && test -s conftest.$ac_objext; then
1.28526 + eval "$as_ac_Header=yes"
1.28527 + else
1.28528 + echo "$as_me: failed program was:" >&5
1.28529 + sed 's/^/| /' conftest.$ac_ext >&5
1.28530 +
1.28531 +-eval "$as_ac_Header=no"
1.28532 ++ eval "$as_ac_Header=no"
1.28533 + fi
1.28534 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.28535 ++
1.28536 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.28537 + fi
1.28538 +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
1.28539 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
1.28540 ++ac_res=`eval echo '${'$as_ac_Header'}'`
1.28541 ++ { echo "$as_me:$LINENO: result: $ac_res" >&5
1.28542 ++echo "${ECHO_T}$ac_res" >&6; }
1.28543 + if test `eval echo '${'$as_ac_Header'}'` = yes; then
1.28544 + cat >>confdefs.h <<_ACEOF
1.28545 + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
1.28546 +@@ -7175,9 +8281,9 @@
1.28547 + for ac_header in dlfcn.h
1.28548 + do
1.28549 + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
1.28550 +-echo "$as_me:$LINENO: checking for $ac_header" >&5
1.28551 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
1.28552 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then
1.28553 ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5
1.28554 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
1.28555 ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
1.28556 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28557 + else
1.28558 + cat >conftest.$ac_ext <<_ACEOF
1.28559 +@@ -7191,38 +8297,35 @@
1.28560 + #include <$ac_header>
1.28561 + _ACEOF
1.28562 + rm -f conftest.$ac_objext
1.28563 +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.28564 +- (eval $ac_compile) 2>conftest.er1
1.28565 ++if { (ac_try="$ac_compile"
1.28566 ++case "(($ac_try" in
1.28567 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.28568 ++ *) ac_try_echo=$ac_try;;
1.28569 ++esac
1.28570 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.28571 ++ (eval "$ac_compile") 2>conftest.er1
1.28572 + ac_status=$?
1.28573 + grep -v '^ *+' conftest.er1 >conftest.err
1.28574 + rm -f conftest.er1
1.28575 + cat conftest.err >&5
1.28576 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28577 +- (exit $ac_status); } &&
1.28578 +- { ac_try='test -z "$ac_c_werror_flag"
1.28579 +- || test ! -s conftest.err'
1.28580 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28581 +- (eval $ac_try) 2>&5
1.28582 +- ac_status=$?
1.28583 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28584 +- (exit $ac_status); }; } &&
1.28585 +- { ac_try='test -s conftest.$ac_objext'
1.28586 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.28587 +- (eval $ac_try) 2>&5
1.28588 +- ac_status=$?
1.28589 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.28590 +- (exit $ac_status); }; }; then
1.28591 ++ (exit $ac_status); } && {
1.28592 ++ test -z "$ac_c_werror_flag" ||
1.28593 ++ test ! -s conftest.err
1.28594 ++ } && test -s conftest.$ac_objext; then
1.28595 + eval "$as_ac_Header=yes"
1.28596 + else
1.28597 + echo "$as_me: failed program was:" >&5
1.28598 + sed 's/^/| /' conftest.$ac_ext >&5
1.28599 +
1.28600 +-eval "$as_ac_Header=no"
1.28601 ++ eval "$as_ac_Header=no"
1.28602 + fi
1.28603 +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
1.28604 ++
1.28605 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
1.28606 + fi
1.28607 +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
1.28608 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
1.28609 ++ac_res=`eval echo '${'$as_ac_Header'}'`
1.28610 ++ { echo "$as_me:$LINENO: result: $ac_res" >&5
1.28611 ++echo "${ECHO_T}$ac_res" >&6; }
1.28612 + if test `eval echo '${'$as_ac_Header'}'` = yes; then
1.28613 + cat >>confdefs.h <<_ACEOF
1.28614 + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
1.28615 +@@ -7242,10 +8345,9 @@
1.28616 +
1.28617 +
1.28618 +
1.28619 +- # Check whether --enable-shared or --disable-shared was given.
1.28620 ++ # Check whether --enable-shared was given.
1.28621 + if test "${enable_shared+set}" = set; then
1.28622 +- enableval="$enable_shared"
1.28623 +- p=${PACKAGE-default}
1.28624 ++ enableval=$enable_shared; p=${PACKAGE-default}
1.28625 + case $enableval in
1.28626 + yes) enable_shared=yes ;;
1.28627 + no) enable_shared=no ;;
1.28628 +@@ -7264,7 +8366,7 @@
1.28629 + esac
1.28630 + else
1.28631 + enable_shared=yes
1.28632 +-fi;
1.28633 ++fi
1.28634 +
1.28635 +
1.28636 +
1.28637 +@@ -7273,10 +8375,10 @@
1.28638 +
1.28639 +
1.28640 +
1.28641 +- # Check whether --enable-static or --disable-static was given.
1.28642 ++
1.28643 ++ # Check whether --enable-static was given.
1.28644 + if test "${enable_static+set}" = set; then
1.28645 +- enableval="$enable_static"
1.28646 +- p=${PACKAGE-default}
1.28647 ++ enableval=$enable_static; p=${PACKAGE-default}
1.28648 + case $enableval in
1.28649 + yes) enable_static=yes ;;
1.28650 + no) enable_static=no ;;
1.28651 +@@ -7295,7 +8397,7 @@
1.28652 + esac
1.28653 + else
1.28654 + enable_static=yes
1.28655 +-fi;
1.28656 ++fi
1.28657 +
1.28658 +
1.28659 +
1.28660 +@@ -7305,13 +8407,14 @@
1.28661 +
1.28662 +
1.28663 +
1.28664 +-# Check whether --with-pic or --without-pic was given.
1.28665 ++
1.28666 ++# Check whether --with-pic was given.
1.28667 + if test "${with_pic+set}" = set; then
1.28668 +- withval="$with_pic"
1.28669 +- pic_mode="$withval"
1.28670 ++ withval=$with_pic; pic_mode="$withval"
1.28671 + else
1.28672 + pic_mode=default
1.28673 +-fi;
1.28674 ++fi
1.28675 ++
1.28676 +
1.28677 + test -z "$pic_mode" && pic_mode=default
1.28678 +
1.28679 +@@ -7321,10 +8424,9 @@
1.28680 +
1.28681 +
1.28682 +
1.28683 +- # Check whether --enable-fast-install or --disable-fast-install was given.
1.28684 ++ # Check whether --enable-fast-install was given.
1.28685 + if test "${enable_fast_install+set}" = set; then
1.28686 +- enableval="$enable_fast_install"
1.28687 +- p=${PACKAGE-default}
1.28688 ++ enableval=$enable_fast_install; p=${PACKAGE-default}
1.28689 + case $enableval in
1.28690 + yes) enable_fast_install=yes ;;
1.28691 + no) enable_fast_install=no ;;
1.28692 +@@ -7343,7 +8445,8 @@
1.28693 + esac
1.28694 + else
1.28695 + enable_fast_install=yes
1.28696 +-fi;
1.28697 ++fi
1.28698 ++
1.28699 +
1.28700 +
1.28701 +
1.28702 +@@ -7403,8 +8506,8 @@
1.28703 + setopt NO_GLOB_SUBST
1.28704 + fi
1.28705 +
1.28706 +-echo "$as_me:$LINENO: checking for objdir" >&5
1.28707 +-echo $ECHO_N "checking for objdir... $ECHO_C" >&6
1.28708 ++{ echo "$as_me:$LINENO: checking for objdir" >&5
1.28709 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
1.28710 + if test "${lt_cv_objdir+set}" = set; then
1.28711 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28712 + else
1.28713 +@@ -7418,8 +8521,8 @@
1.28714 + fi
1.28715 + rmdir .libs 2>/dev/null
1.28716 + fi
1.28717 +-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
1.28718 +-echo "${ECHO_T}$lt_cv_objdir" >&6
1.28719 ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
1.28720 ++echo "${ECHO_T}$lt_cv_objdir" >&6; }
1.28721 + objdir=$lt_cv_objdir
1.28722 +
1.28723 +
1.28724 +@@ -7511,8 +8614,8 @@
1.28725 + case $deplibs_check_method in
1.28726 + file_magic*)
1.28727 + if test "$file_magic_cmd" = '$MAGIC_CMD'; then
1.28728 +- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
1.28729 +-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
1.28730 ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
1.28731 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
1.28732 + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
1.28733 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28734 + else
1.28735 +@@ -7564,11 +8667,11 @@
1.28736 +
1.28737 + MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
1.28738 + if test -n "$MAGIC_CMD"; then
1.28739 +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
1.28740 +-echo "${ECHO_T}$MAGIC_CMD" >&6
1.28741 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
1.28742 ++echo "${ECHO_T}$MAGIC_CMD" >&6; }
1.28743 + else
1.28744 +- echo "$as_me:$LINENO: result: no" >&5
1.28745 +-echo "${ECHO_T}no" >&6
1.28746 ++ { echo "$as_me:$LINENO: result: no" >&5
1.28747 ++echo "${ECHO_T}no" >&6; }
1.28748 + fi
1.28749 +
1.28750 +
1.28751 +@@ -7577,8 +8680,8 @@
1.28752 +
1.28753 + if test -z "$lt_cv_path_MAGIC_CMD"; then
1.28754 + if test -n "$ac_tool_prefix"; then
1.28755 +- echo "$as_me:$LINENO: checking for file" >&5
1.28756 +-echo $ECHO_N "checking for file... $ECHO_C" >&6
1.28757 ++ { echo "$as_me:$LINENO: checking for file" >&5
1.28758 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; }
1.28759 + if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
1.28760 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28761 + else
1.28762 +@@ -7630,11 +8733,11 @@
1.28763 +
1.28764 + MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
1.28765 + if test -n "$MAGIC_CMD"; then
1.28766 +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
1.28767 +-echo "${ECHO_T}$MAGIC_CMD" >&6
1.28768 ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
1.28769 ++echo "${ECHO_T}$MAGIC_CMD" >&6; }
1.28770 + else
1.28771 +- echo "$as_me:$LINENO: result: no" >&5
1.28772 +-echo "${ECHO_T}no" >&6
1.28773 ++ { echo "$as_me:$LINENO: result: no" >&5
1.28774 ++echo "${ECHO_T}no" >&6; }
1.28775 + fi
1.28776 +
1.28777 +
1.28778 +@@ -7714,8 +8817,8 @@
1.28779 + if test "$GCC" = yes; then
1.28780 + lt_prog_compiler_no_builtin_flag=' -fno-builtin'
1.28781 +
1.28782 +- echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
1.28783 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
1.28784 ++ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
1.28785 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
1.28786 + if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
1.28787 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28788 + else
1.28789 +@@ -7732,11 +8835,11 @@
1.28790 + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
1.28791 + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
1.28792 + -e 's:$: $lt_compiler_flag:'`
1.28793 +- (eval echo "\"\$as_me:7735: $lt_compile\"" >&5)
1.28794 ++ (eval echo "\"\$as_me:8838: $lt_compile\"" >&5)
1.28795 + (eval "$lt_compile" 2>conftest.err)
1.28796 + ac_status=$?
1.28797 + cat conftest.err >&5
1.28798 +- echo "$as_me:7739: \$? = $ac_status" >&5
1.28799 ++ echo "$as_me:8842: \$? = $ac_status" >&5
1.28800 + if (exit $ac_status) && test -s "$ac_outfile"; then
1.28801 + # The compiler can only warn and ignore the option if not recognized
1.28802 + # So say no if there are warnings other than the usual output.
1.28803 +@@ -7749,8 +8852,8 @@
1.28804 + $RM conftest*
1.28805 +
1.28806 + fi
1.28807 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
1.28808 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
1.28809 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
1.28810 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
1.28811 +
1.28812 + if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
1.28813 + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
1.28814 +@@ -7769,8 +8872,8 @@
1.28815 + lt_prog_compiler_pic=
1.28816 + lt_prog_compiler_static=
1.28817 +
1.28818 +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
1.28819 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
1.28820 ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
1.28821 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
1.28822 +
1.28823 + if test "$GCC" = yes; then
1.28824 + lt_prog_compiler_wl='-Wl,'
1.28825 +@@ -8041,8 +9144,8 @@
1.28826 + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
1.28827 + ;;
1.28828 + esac
1.28829 +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
1.28830 +-echo "${ECHO_T}$lt_prog_compiler_pic" >&6
1.28831 ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
1.28832 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
1.28833 +
1.28834 +
1.28835 +
1.28836 +@@ -8053,8 +9156,8 @@
1.28837 + # Check to make sure the PIC flag actually works.
1.28838 + #
1.28839 + if test -n "$lt_prog_compiler_pic"; then
1.28840 +- echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
1.28841 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
1.28842 ++ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
1.28843 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
1.28844 + if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
1.28845 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28846 + else
1.28847 +@@ -8071,11 +9174,11 @@
1.28848 + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
1.28849 + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
1.28850 + -e 's:$: $lt_compiler_flag:'`
1.28851 +- (eval echo "\"\$as_me:8074: $lt_compile\"" >&5)
1.28852 ++ (eval echo "\"\$as_me:9177: $lt_compile\"" >&5)
1.28853 + (eval "$lt_compile" 2>conftest.err)
1.28854 + ac_status=$?
1.28855 + cat conftest.err >&5
1.28856 +- echo "$as_me:8078: \$? = $ac_status" >&5
1.28857 ++ echo "$as_me:9181: \$? = $ac_status" >&5
1.28858 + if (exit $ac_status) && test -s "$ac_outfile"; then
1.28859 + # The compiler can only warn and ignore the option if not recognized
1.28860 + # So say no if there are warnings other than the usual output.
1.28861 +@@ -8088,8 +9191,8 @@
1.28862 + $RM conftest*
1.28863 +
1.28864 + fi
1.28865 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
1.28866 +-echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6
1.28867 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
1.28868 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
1.28869 +
1.28870 + if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
1.28871 + case $lt_prog_compiler_pic in
1.28872 +@@ -8112,8 +9215,8 @@
1.28873 + # Check to make sure the static flag actually works.
1.28874 + #
1.28875 + wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
1.28876 +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
1.28877 +-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
1.28878 ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
1.28879 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
1.28880 + if test "${lt_cv_prog_compiler_static_works+set}" = set; then
1.28881 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28882 + else
1.28883 +@@ -8140,8 +9243,8 @@
1.28884 + LDFLAGS="$save_LDFLAGS"
1.28885 +
1.28886 + fi
1.28887 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
1.28888 +-echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6
1.28889 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
1.28890 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
1.28891 +
1.28892 + if test x"$lt_cv_prog_compiler_static_works" = xyes; then
1.28893 + :
1.28894 +@@ -8155,8 +9258,8 @@
1.28895 +
1.28896 +
1.28897 +
1.28898 +- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
1.28899 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
1.28900 ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
1.28901 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
1.28902 + if test "${lt_cv_prog_compiler_c_o+set}" = set; then
1.28903 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28904 + else
1.28905 +@@ -8176,11 +9279,11 @@
1.28906 + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
1.28907 + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
1.28908 + -e 's:$: $lt_compiler_flag:'`
1.28909 +- (eval echo "\"\$as_me:8179: $lt_compile\"" >&5)
1.28910 ++ (eval echo "\"\$as_me:9282: $lt_compile\"" >&5)
1.28911 + (eval "$lt_compile" 2>out/conftest.err)
1.28912 + ac_status=$?
1.28913 + cat out/conftest.err >&5
1.28914 +- echo "$as_me:8183: \$? = $ac_status" >&5
1.28915 ++ echo "$as_me:9286: \$? = $ac_status" >&5
1.28916 + if (exit $ac_status) && test -s out/conftest2.$ac_objext
1.28917 + then
1.28918 + # The compiler can only warn and ignore the option if not recognized
1.28919 +@@ -8202,16 +9305,16 @@
1.28920 + $RM conftest*
1.28921 +
1.28922 + fi
1.28923 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
1.28924 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
1.28925 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
1.28926 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
1.28927 +
1.28928 +
1.28929 +
1.28930 +
1.28931 +
1.28932 +
1.28933 +- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
1.28934 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
1.28935 ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
1.28936 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
1.28937 + if test "${lt_cv_prog_compiler_c_o+set}" = set; then
1.28938 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.28939 + else
1.28940 +@@ -8231,11 +9334,11 @@
1.28941 + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
1.28942 + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
1.28943 + -e 's:$: $lt_compiler_flag:'`
1.28944 +- (eval echo "\"\$as_me:8234: $lt_compile\"" >&5)
1.28945 ++ (eval echo "\"\$as_me:9337: $lt_compile\"" >&5)
1.28946 + (eval "$lt_compile" 2>out/conftest.err)
1.28947 + ac_status=$?
1.28948 + cat out/conftest.err >&5
1.28949 +- echo "$as_me:8238: \$? = $ac_status" >&5
1.28950 ++ echo "$as_me:9341: \$? = $ac_status" >&5
1.28951 + if (exit $ac_status) && test -s out/conftest2.$ac_objext
1.28952 + then
1.28953 + # The compiler can only warn and ignore the option if not recognized
1.28954 +@@ -8257,8 +9360,8 @@
1.28955 + $RM conftest*
1.28956 +
1.28957 + fi
1.28958 +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
1.28959 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
1.28960 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
1.28961 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
1.28962 +
1.28963 +
1.28964 +
1.28965 +@@ -8266,16 +9369,16 @@
1.28966 + hard_links="nottested"
1.28967 + if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
1.28968 + # do not overwrite the value of need_locks provided by the user
1.28969 +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
1.28970 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
1.28971 ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
1.28972 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
1.28973 + hard_links=yes
1.28974 + $RM conftest*
1.28975 + ln conftest.a conftest.b 2>/dev/null && hard_links=no
1.28976 + touch conftest.a
1.28977 + ln conftest.a conftest.b 2>&5 || hard_links=no
1.28978 + ln conftest.a conftest.b 2>/dev/null && hard_links=no
1.28979 +- echo "$as_me:$LINENO: result: $hard_links" >&5
1.28980 +-echo "${ECHO_T}$hard_links" >&6
1.28981 ++ { echo "$as_me:$LINENO: result: $hard_links" >&5
1.28982 ++echo "${ECHO_T}$hard_links" >&6; }
1.28983 + if test "$hard_links" = no; then
1.28984 + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
1.28985 + echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
1.28986 +@@ -8290,8 +9393,8 @@
1.28987 +
1.28988 +
1.28989 +
1.28990 +- echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
1.28991 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
1.28992 ++ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
1.28993 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
1.28994 +
1.28995 + runpath_var=
1.28996 + allow_undefined_flag=
1.28997 +@@ -8748,27 +9851,23 @@
1.28998 + }
1.28999 + _ACEOF
1.29000 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29001 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29002 +- (eval $ac_link) 2>conftest.er1
1.29003 ++if { (ac_try="$ac_link"
1.29004 ++case "(($ac_try" in
1.29005 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29006 ++ *) ac_try_echo=$ac_try;;
1.29007 ++esac
1.29008 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29009 ++ (eval "$ac_link") 2>conftest.er1
1.29010 + ac_status=$?
1.29011 + grep -v '^ *+' conftest.er1 >conftest.err
1.29012 + rm -f conftest.er1
1.29013 + cat conftest.err >&5
1.29014 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29015 +- (exit $ac_status); } &&
1.29016 +- { ac_try='test -z "$ac_c_werror_flag"
1.29017 +- || test ! -s conftest.err'
1.29018 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29019 +- (eval $ac_try) 2>&5
1.29020 +- ac_status=$?
1.29021 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29022 +- (exit $ac_status); }; } &&
1.29023 +- { ac_try='test -s conftest$ac_exeext'
1.29024 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29025 +- (eval $ac_try) 2>&5
1.29026 +- ac_status=$?
1.29027 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29028 +- (exit $ac_status); }; }; then
1.29029 ++ (exit $ac_status); } && {
1.29030 ++ test -z "$ac_c_werror_flag" ||
1.29031 ++ test ! -s conftest.err
1.29032 ++ } && test -s conftest$ac_exeext &&
1.29033 ++ $as_test_x conftest$ac_exeext; then
1.29034 +
1.29035 + lt_aix_libpath_sed='
1.29036 + /Import File Strings/,/^$/ {
1.29037 +@@ -8786,8 +9885,10 @@
1.29038 + echo "$as_me: failed program was:" >&5
1.29039 + sed 's/^/| /' conftest.$ac_ext >&5
1.29040 +
1.29041 ++
1.29042 + fi
1.29043 +-rm -f conftest.err conftest.$ac_objext \
1.29044 ++
1.29045 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29046 + conftest$ac_exeext conftest.$ac_ext
1.29047 + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
1.29048 +
1.29049 +@@ -8817,27 +9918,23 @@
1.29050 + }
1.29051 + _ACEOF
1.29052 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29053 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29054 +- (eval $ac_link) 2>conftest.er1
1.29055 ++if { (ac_try="$ac_link"
1.29056 ++case "(($ac_try" in
1.29057 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29058 ++ *) ac_try_echo=$ac_try;;
1.29059 ++esac
1.29060 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29061 ++ (eval "$ac_link") 2>conftest.er1
1.29062 + ac_status=$?
1.29063 + grep -v '^ *+' conftest.er1 >conftest.err
1.29064 + rm -f conftest.er1
1.29065 + cat conftest.err >&5
1.29066 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29067 +- (exit $ac_status); } &&
1.29068 +- { ac_try='test -z "$ac_c_werror_flag"
1.29069 +- || test ! -s conftest.err'
1.29070 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29071 +- (eval $ac_try) 2>&5
1.29072 +- ac_status=$?
1.29073 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29074 +- (exit $ac_status); }; } &&
1.29075 +- { ac_try='test -s conftest$ac_exeext'
1.29076 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29077 +- (eval $ac_try) 2>&5
1.29078 +- ac_status=$?
1.29079 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29080 +- (exit $ac_status); }; }; then
1.29081 ++ (exit $ac_status); } && {
1.29082 ++ test -z "$ac_c_werror_flag" ||
1.29083 ++ test ! -s conftest.err
1.29084 ++ } && test -s conftest$ac_exeext &&
1.29085 ++ $as_test_x conftest$ac_exeext; then
1.29086 +
1.29087 + lt_aix_libpath_sed='
1.29088 + /Import File Strings/,/^$/ {
1.29089 +@@ -8855,8 +9952,10 @@
1.29090 + echo "$as_me: failed program was:" >&5
1.29091 + sed 's/^/| /' conftest.$ac_ext >&5
1.29092 +
1.29093 ++
1.29094 + fi
1.29095 +-rm -f conftest.err conftest.$ac_objext \
1.29096 ++
1.29097 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29098 + conftest$ac_exeext conftest.$ac_ext
1.29099 + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
1.29100 +
1.29101 +@@ -9073,35 +10172,33 @@
1.29102 + int foo(void) {}
1.29103 + _ACEOF
1.29104 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29105 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29106 +- (eval $ac_link) 2>conftest.er1
1.29107 ++if { (ac_try="$ac_link"
1.29108 ++case "(($ac_try" in
1.29109 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29110 ++ *) ac_try_echo=$ac_try;;
1.29111 ++esac
1.29112 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29113 ++ (eval "$ac_link") 2>conftest.er1
1.29114 + ac_status=$?
1.29115 + grep -v '^ *+' conftest.er1 >conftest.err
1.29116 + rm -f conftest.er1
1.29117 + cat conftest.err >&5
1.29118 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29119 +- (exit $ac_status); } &&
1.29120 +- { ac_try='test -z "$ac_c_werror_flag"
1.29121 +- || test ! -s conftest.err'
1.29122 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29123 +- (eval $ac_try) 2>&5
1.29124 +- ac_status=$?
1.29125 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29126 +- (exit $ac_status); }; } &&
1.29127 +- { ac_try='test -s conftest$ac_exeext'
1.29128 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29129 +- (eval $ac_try) 2>&5
1.29130 +- ac_status=$?
1.29131 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29132 +- (exit $ac_status); }; }; then
1.29133 ++ (exit $ac_status); } && {
1.29134 ++ test -z "$ac_c_werror_flag" ||
1.29135 ++ test ! -s conftest.err
1.29136 ++ } && test -s conftest$ac_exeext &&
1.29137 ++ $as_test_x conftest$ac_exeext; then
1.29138 + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
1.29139 +
1.29140 + else
1.29141 + echo "$as_me: failed program was:" >&5
1.29142 + sed 's/^/| /' conftest.$ac_ext >&5
1.29143 +
1.29144 ++
1.29145 + fi
1.29146 +-rm -f conftest.err conftest.$ac_objext \
1.29147 ++
1.29148 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29149 + conftest$ac_exeext conftest.$ac_ext
1.29150 + LDFLAGS="$save_LDFLAGS"
1.29151 + else
1.29152 +@@ -9358,8 +10455,8 @@
1.29153 + fi
1.29154 + fi
1.29155 +
1.29156 +-echo "$as_me:$LINENO: result: $ld_shlibs" >&5
1.29157 +-echo "${ECHO_T}$ld_shlibs" >&6
1.29158 ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
1.29159 ++echo "${ECHO_T}$ld_shlibs" >&6; }
1.29160 + test "$ld_shlibs" = no && can_build_shared=no
1.29161 +
1.29162 + with_gnu_ld=$with_gnu_ld
1.29163 +@@ -9395,46 +10492,52 @@
1.29164 + # Test whether the compiler implicitly links with -lc since on some
1.29165 + # systems, -lgcc has to come before -lc. If gcc already passes -lc
1.29166 + # to ld, don't add -lc before -lgcc.
1.29167 +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
1.29168 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
1.29169 +- $RM conftest*
1.29170 +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
1.29171 ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
1.29172 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
1.29173 ++if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
1.29174 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.29175 ++else
1.29176 ++ $RM conftest*
1.29177 ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
1.29178 +
1.29179 +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.29180 ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
1.29181 + (eval $ac_compile) 2>&5
1.29182 + ac_status=$?
1.29183 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29184 + (exit $ac_status); } 2>conftest.err; then
1.29185 +- soname=conftest
1.29186 +- lib=conftest
1.29187 +- libobjs=conftest.$ac_objext
1.29188 +- deplibs=
1.29189 +- wl=$lt_prog_compiler_wl
1.29190 +- pic_flag=$lt_prog_compiler_pic
1.29191 +- compiler_flags=-v
1.29192 +- linker_flags=-v
1.29193 +- verstring=
1.29194 +- output_objdir=.
1.29195 +- libname=conftest
1.29196 +- lt_save_allow_undefined_flag=$allow_undefined_flag
1.29197 +- allow_undefined_flag=
1.29198 +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
1.29199 ++ soname=conftest
1.29200 ++ lib=conftest
1.29201 ++ libobjs=conftest.$ac_objext
1.29202 ++ deplibs=
1.29203 ++ wl=$lt_prog_compiler_wl
1.29204 ++ pic_flag=$lt_prog_compiler_pic
1.29205 ++ compiler_flags=-v
1.29206 ++ linker_flags=-v
1.29207 ++ verstring=
1.29208 ++ output_objdir=.
1.29209 ++ libname=conftest
1.29210 ++ lt_save_allow_undefined_flag=$allow_undefined_flag
1.29211 ++ allow_undefined_flag=
1.29212 ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
1.29213 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
1.29214 + ac_status=$?
1.29215 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29216 + (exit $ac_status); }
1.29217 +- then
1.29218 +- archive_cmds_need_lc=no
1.29219 +- else
1.29220 +- archive_cmds_need_lc=yes
1.29221 +- fi
1.29222 +- allow_undefined_flag=$lt_save_allow_undefined_flag
1.29223 +- else
1.29224 +- cat conftest.err 1>&5
1.29225 +- fi
1.29226 +- $RM conftest*
1.29227 +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
1.29228 +-echo "${ECHO_T}$archive_cmds_need_lc" >&6
1.29229 ++ then
1.29230 ++ lt_cv_archive_cmds_need_lc=no
1.29231 ++ else
1.29232 ++ lt_cv_archive_cmds_need_lc=yes
1.29233 ++ fi
1.29234 ++ allow_undefined_flag=$lt_save_allow_undefined_flag
1.29235 ++ else
1.29236 ++ cat conftest.err 1>&5
1.29237 ++ fi
1.29238 ++ $RM conftest*
1.29239 ++
1.29240 ++fi
1.29241 ++{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
1.29242 ++echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; }
1.29243 ++ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
1.29244 + ;;
1.29245 + esac
1.29246 + fi
1.29247 +@@ -9597,8 +10700,8 @@
1.29248 +
1.29249 +
1.29250 +
1.29251 +- echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
1.29252 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
1.29253 ++ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
1.29254 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
1.29255 +
1.29256 + if test "$GCC" = yes; then
1.29257 + case $host_os in
1.29258 +@@ -10014,12 +11117,17 @@
1.29259 + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
1.29260 + shlibpath_var=LD_LIBRARY_PATH
1.29261 + shlibpath_overrides_runpath=no
1.29262 ++
1.29263 + # Some binutils ld are patched to set DT_RUNPATH
1.29264 +- save_LDFLAGS=$LDFLAGS
1.29265 +- save_libdir=$libdir
1.29266 +- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
1.29267 +- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
1.29268 +- cat >conftest.$ac_ext <<_ACEOF
1.29269 ++ if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then
1.29270 ++ echo $ECHO_N "(cached) $ECHO_C" >&6
1.29271 ++else
1.29272 ++ lt_cv_shlibpath_overrides_runpath=no
1.29273 ++ save_LDFLAGS=$LDFLAGS
1.29274 ++ save_libdir=$libdir
1.29275 ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
1.29276 ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
1.29277 ++ cat >conftest.$ac_ext <<_ACEOF
1.29278 + /* confdefs.h. */
1.29279 + _ACEOF
1.29280 + cat confdefs.h >>conftest.$ac_ext
1.29281 +@@ -10035,40 +11143,42 @@
1.29282 + }
1.29283 + _ACEOF
1.29284 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29285 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29286 +- (eval $ac_link) 2>conftest.er1
1.29287 ++if { (ac_try="$ac_link"
1.29288 ++case "(($ac_try" in
1.29289 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29290 ++ *) ac_try_echo=$ac_try;;
1.29291 ++esac
1.29292 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29293 ++ (eval "$ac_link") 2>conftest.er1
1.29294 + ac_status=$?
1.29295 + grep -v '^ *+' conftest.er1 >conftest.err
1.29296 + rm -f conftest.er1
1.29297 + cat conftest.err >&5
1.29298 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29299 +- (exit $ac_status); } &&
1.29300 +- { ac_try='test -z "$ac_c_werror_flag"
1.29301 +- || test ! -s conftest.err'
1.29302 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29303 +- (eval $ac_try) 2>&5
1.29304 +- ac_status=$?
1.29305 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29306 +- (exit $ac_status); }; } &&
1.29307 +- { ac_try='test -s conftest$ac_exeext'
1.29308 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29309 +- (eval $ac_try) 2>&5
1.29310 +- ac_status=$?
1.29311 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29312 +- (exit $ac_status); }; }; then
1.29313 ++ (exit $ac_status); } && {
1.29314 ++ test -z "$ac_c_werror_flag" ||
1.29315 ++ test ! -s conftest.err
1.29316 ++ } && test -s conftest$ac_exeext &&
1.29317 ++ $as_test_x conftest$ac_exeext; then
1.29318 + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
1.29319 +- shlibpath_overrides_runpath=yes
1.29320 ++ lt_cv_shlibpath_overrides_runpath=yes
1.29321 + fi
1.29322 +
1.29323 + else
1.29324 + echo "$as_me: failed program was:" >&5
1.29325 + sed 's/^/| /' conftest.$ac_ext >&5
1.29326 +
1.29327 ++
1.29328 + fi
1.29329 +-rm -f conftest.err conftest.$ac_objext \
1.29330 ++
1.29331 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29332 + conftest$ac_exeext conftest.$ac_ext
1.29333 +- LDFLAGS=$save_LDFLAGS
1.29334 +- libdir=$save_libdir
1.29335 ++ LDFLAGS=$save_LDFLAGS
1.29336 ++ libdir=$save_libdir
1.29337 ++
1.29338 ++fi
1.29339 ++
1.29340 ++ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
1.29341 +
1.29342 + # This implies no fast_install, which is unacceptable.
1.29343 + # Some rework will be needed to allow for fast_install
1.29344 +@@ -10278,8 +11388,8 @@
1.29345 + dynamic_linker=no
1.29346 + ;;
1.29347 + esac
1.29348 +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
1.29349 +-echo "${ECHO_T}$dynamic_linker" >&6
1.29350 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
1.29351 ++echo "${ECHO_T}$dynamic_linker" >&6; }
1.29352 + test "$dynamic_linker" = no && can_build_shared=no
1.29353 +
1.29354 + variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
1.29355 +@@ -10380,8 +11490,8 @@
1.29356 +
1.29357 +
1.29358 +
1.29359 +- echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
1.29360 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
1.29361 ++ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
1.29362 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
1.29363 + hardcode_action=
1.29364 + if test -n "$hardcode_libdir_flag_spec" ||
1.29365 + test -n "$runpath_var" ||
1.29366 +@@ -10405,8 +11515,8 @@
1.29367 + # directories.
1.29368 + hardcode_action=unsupported
1.29369 + fi
1.29370 +-echo "$as_me:$LINENO: result: $hardcode_action" >&5
1.29371 +-echo "${ECHO_T}$hardcode_action" >&6
1.29372 ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
1.29373 ++echo "${ECHO_T}$hardcode_action" >&6; }
1.29374 +
1.29375 + if test "$hardcode_action" = relink ||
1.29376 + test "$inherit_rpath" = yes; then
1.29377 +@@ -10450,8 +11560,8 @@
1.29378 +
1.29379 + darwin*)
1.29380 + # if libdl is installed we need to link against it
1.29381 +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
1.29382 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
1.29383 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
1.29384 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
1.29385 + if test "${ac_cv_lib_dl_dlopen+set}" = set; then
1.29386 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.29387 + else
1.29388 +@@ -10464,56 +11574,53 @@
1.29389 + cat >>conftest.$ac_ext <<_ACEOF
1.29390 + /* end confdefs.h. */
1.29391 +
1.29392 +-/* Override any gcc2 internal prototype to avoid an error. */
1.29393 ++/* Override any GCC internal prototype to avoid an error.
1.29394 ++ Use char because int might match the return type of a GCC
1.29395 ++ builtin and then its argument prototype would still apply. */
1.29396 + #ifdef __cplusplus
1.29397 + extern "C"
1.29398 + #endif
1.29399 +-/* We use char because int might match the return type of a gcc2
1.29400 +- builtin and then its argument prototype would still apply. */
1.29401 + char dlopen ();
1.29402 + int
1.29403 + main ()
1.29404 + {
1.29405 +-dlopen ();
1.29406 ++return dlopen ();
1.29407 + ;
1.29408 + return 0;
1.29409 + }
1.29410 + _ACEOF
1.29411 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29412 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29413 +- (eval $ac_link) 2>conftest.er1
1.29414 ++if { (ac_try="$ac_link"
1.29415 ++case "(($ac_try" in
1.29416 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29417 ++ *) ac_try_echo=$ac_try;;
1.29418 ++esac
1.29419 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29420 ++ (eval "$ac_link") 2>conftest.er1
1.29421 + ac_status=$?
1.29422 + grep -v '^ *+' conftest.er1 >conftest.err
1.29423 + rm -f conftest.er1
1.29424 + cat conftest.err >&5
1.29425 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29426 +- (exit $ac_status); } &&
1.29427 +- { ac_try='test -z "$ac_c_werror_flag"
1.29428 +- || test ! -s conftest.err'
1.29429 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29430 +- (eval $ac_try) 2>&5
1.29431 +- ac_status=$?
1.29432 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29433 +- (exit $ac_status); }; } &&
1.29434 +- { ac_try='test -s conftest$ac_exeext'
1.29435 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29436 +- (eval $ac_try) 2>&5
1.29437 +- ac_status=$?
1.29438 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29439 +- (exit $ac_status); }; }; then
1.29440 ++ (exit $ac_status); } && {
1.29441 ++ test -z "$ac_c_werror_flag" ||
1.29442 ++ test ! -s conftest.err
1.29443 ++ } && test -s conftest$ac_exeext &&
1.29444 ++ $as_test_x conftest$ac_exeext; then
1.29445 + ac_cv_lib_dl_dlopen=yes
1.29446 + else
1.29447 + echo "$as_me: failed program was:" >&5
1.29448 + sed 's/^/| /' conftest.$ac_ext >&5
1.29449 +
1.29450 +-ac_cv_lib_dl_dlopen=no
1.29451 ++ ac_cv_lib_dl_dlopen=no
1.29452 + fi
1.29453 +-rm -f conftest.err conftest.$ac_objext \
1.29454 ++
1.29455 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29456 + conftest$ac_exeext conftest.$ac_ext
1.29457 + LIBS=$ac_check_lib_save_LIBS
1.29458 + fi
1.29459 +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
1.29460 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
1.29461 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
1.29462 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
1.29463 + if test $ac_cv_lib_dl_dlopen = yes; then
1.29464 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
1.29465 + else
1.29466 +@@ -10527,8 +11634,8 @@
1.29467 + ;;
1.29468 +
1.29469 + *)
1.29470 +- echo "$as_me:$LINENO: checking for shl_load" >&5
1.29471 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
1.29472 ++ { echo "$as_me:$LINENO: checking for shl_load" >&5
1.29473 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
1.29474 + if test "${ac_cv_func_shl_load+set}" = set; then
1.29475 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.29476 + else
1.29477 +@@ -10555,73 +11662,64 @@
1.29478 +
1.29479 + #undef shl_load
1.29480 +
1.29481 +-/* Override any gcc2 internal prototype to avoid an error. */
1.29482 ++/* Override any GCC internal prototype to avoid an error.
1.29483 ++ Use char because int might match the return type of a GCC
1.29484 ++ builtin and then its argument prototype would still apply. */
1.29485 + #ifdef __cplusplus
1.29486 + extern "C"
1.29487 +-{
1.29488 + #endif
1.29489 +-/* We use char because int might match the return type of a gcc2
1.29490 +- builtin and then its argument prototype would still apply. */
1.29491 + char shl_load ();
1.29492 + /* The GNU C library defines this for functions which it implements
1.29493 + to always fail with ENOSYS. Some functions are actually named
1.29494 + something starting with __ and the normal name is an alias. */
1.29495 +-#if defined (__stub_shl_load) || defined (__stub___shl_load)
1.29496 ++#if defined __stub_shl_load || defined __stub___shl_load
1.29497 + choke me
1.29498 +-#else
1.29499 +-char (*f) () = shl_load;
1.29500 +-#endif
1.29501 +-#ifdef __cplusplus
1.29502 +-}
1.29503 + #endif
1.29504 +
1.29505 + int
1.29506 + main ()
1.29507 + {
1.29508 +-return f != shl_load;
1.29509 ++return shl_load ();
1.29510 + ;
1.29511 + return 0;
1.29512 + }
1.29513 + _ACEOF
1.29514 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29515 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29516 +- (eval $ac_link) 2>conftest.er1
1.29517 ++if { (ac_try="$ac_link"
1.29518 ++case "(($ac_try" in
1.29519 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29520 ++ *) ac_try_echo=$ac_try;;
1.29521 ++esac
1.29522 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29523 ++ (eval "$ac_link") 2>conftest.er1
1.29524 + ac_status=$?
1.29525 + grep -v '^ *+' conftest.er1 >conftest.err
1.29526 + rm -f conftest.er1
1.29527 + cat conftest.err >&5
1.29528 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29529 +- (exit $ac_status); } &&
1.29530 +- { ac_try='test -z "$ac_c_werror_flag"
1.29531 +- || test ! -s conftest.err'
1.29532 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29533 +- (eval $ac_try) 2>&5
1.29534 +- ac_status=$?
1.29535 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29536 +- (exit $ac_status); }; } &&
1.29537 +- { ac_try='test -s conftest$ac_exeext'
1.29538 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29539 +- (eval $ac_try) 2>&5
1.29540 +- ac_status=$?
1.29541 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29542 +- (exit $ac_status); }; }; then
1.29543 ++ (exit $ac_status); } && {
1.29544 ++ test -z "$ac_c_werror_flag" ||
1.29545 ++ test ! -s conftest.err
1.29546 ++ } && test -s conftest$ac_exeext &&
1.29547 ++ $as_test_x conftest$ac_exeext; then
1.29548 + ac_cv_func_shl_load=yes
1.29549 + else
1.29550 + echo "$as_me: failed program was:" >&5
1.29551 + sed 's/^/| /' conftest.$ac_ext >&5
1.29552 +
1.29553 +-ac_cv_func_shl_load=no
1.29554 ++ ac_cv_func_shl_load=no
1.29555 + fi
1.29556 +-rm -f conftest.err conftest.$ac_objext \
1.29557 ++
1.29558 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29559 + conftest$ac_exeext conftest.$ac_ext
1.29560 + fi
1.29561 +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
1.29562 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
1.29563 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
1.29564 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
1.29565 + if test $ac_cv_func_shl_load = yes; then
1.29566 + lt_cv_dlopen="shl_load"
1.29567 + else
1.29568 +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
1.29569 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
1.29570 ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
1.29571 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
1.29572 + if test "${ac_cv_lib_dld_shl_load+set}" = set; then
1.29573 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.29574 + else
1.29575 +@@ -10634,61 +11732,58 @@
1.29576 + cat >>conftest.$ac_ext <<_ACEOF
1.29577 + /* end confdefs.h. */
1.29578 +
1.29579 +-/* Override any gcc2 internal prototype to avoid an error. */
1.29580 ++/* Override any GCC internal prototype to avoid an error.
1.29581 ++ Use char because int might match the return type of a GCC
1.29582 ++ builtin and then its argument prototype would still apply. */
1.29583 + #ifdef __cplusplus
1.29584 + extern "C"
1.29585 + #endif
1.29586 +-/* We use char because int might match the return type of a gcc2
1.29587 +- builtin and then its argument prototype would still apply. */
1.29588 + char shl_load ();
1.29589 + int
1.29590 + main ()
1.29591 + {
1.29592 +-shl_load ();
1.29593 ++return shl_load ();
1.29594 + ;
1.29595 + return 0;
1.29596 + }
1.29597 + _ACEOF
1.29598 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29599 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29600 +- (eval $ac_link) 2>conftest.er1
1.29601 ++if { (ac_try="$ac_link"
1.29602 ++case "(($ac_try" in
1.29603 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29604 ++ *) ac_try_echo=$ac_try;;
1.29605 ++esac
1.29606 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29607 ++ (eval "$ac_link") 2>conftest.er1
1.29608 + ac_status=$?
1.29609 + grep -v '^ *+' conftest.er1 >conftest.err
1.29610 + rm -f conftest.er1
1.29611 + cat conftest.err >&5
1.29612 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29613 +- (exit $ac_status); } &&
1.29614 +- { ac_try='test -z "$ac_c_werror_flag"
1.29615 +- || test ! -s conftest.err'
1.29616 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29617 +- (eval $ac_try) 2>&5
1.29618 +- ac_status=$?
1.29619 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29620 +- (exit $ac_status); }; } &&
1.29621 +- { ac_try='test -s conftest$ac_exeext'
1.29622 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29623 +- (eval $ac_try) 2>&5
1.29624 +- ac_status=$?
1.29625 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29626 +- (exit $ac_status); }; }; then
1.29627 ++ (exit $ac_status); } && {
1.29628 ++ test -z "$ac_c_werror_flag" ||
1.29629 ++ test ! -s conftest.err
1.29630 ++ } && test -s conftest$ac_exeext &&
1.29631 ++ $as_test_x conftest$ac_exeext; then
1.29632 + ac_cv_lib_dld_shl_load=yes
1.29633 + else
1.29634 + echo "$as_me: failed program was:" >&5
1.29635 + sed 's/^/| /' conftest.$ac_ext >&5
1.29636 +
1.29637 +-ac_cv_lib_dld_shl_load=no
1.29638 ++ ac_cv_lib_dld_shl_load=no
1.29639 + fi
1.29640 +-rm -f conftest.err conftest.$ac_objext \
1.29641 ++
1.29642 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29643 + conftest$ac_exeext conftest.$ac_ext
1.29644 + LIBS=$ac_check_lib_save_LIBS
1.29645 + fi
1.29646 +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
1.29647 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
1.29648 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
1.29649 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
1.29650 + if test $ac_cv_lib_dld_shl_load = yes; then
1.29651 + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
1.29652 + else
1.29653 +- echo "$as_me:$LINENO: checking for dlopen" >&5
1.29654 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
1.29655 ++ { echo "$as_me:$LINENO: checking for dlopen" >&5
1.29656 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
1.29657 + if test "${ac_cv_func_dlopen+set}" = set; then
1.29658 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.29659 + else
1.29660 +@@ -10715,73 +11810,64 @@
1.29661 +
1.29662 + #undef dlopen
1.29663 +
1.29664 +-/* Override any gcc2 internal prototype to avoid an error. */
1.29665 ++/* Override any GCC internal prototype to avoid an error.
1.29666 ++ Use char because int might match the return type of a GCC
1.29667 ++ builtin and then its argument prototype would still apply. */
1.29668 + #ifdef __cplusplus
1.29669 + extern "C"
1.29670 +-{
1.29671 + #endif
1.29672 +-/* We use char because int might match the return type of a gcc2
1.29673 +- builtin and then its argument prototype would still apply. */
1.29674 + char dlopen ();
1.29675 + /* The GNU C library defines this for functions which it implements
1.29676 + to always fail with ENOSYS. Some functions are actually named
1.29677 + something starting with __ and the normal name is an alias. */
1.29678 +-#if defined (__stub_dlopen) || defined (__stub___dlopen)
1.29679 ++#if defined __stub_dlopen || defined __stub___dlopen
1.29680 + choke me
1.29681 +-#else
1.29682 +-char (*f) () = dlopen;
1.29683 +-#endif
1.29684 +-#ifdef __cplusplus
1.29685 +-}
1.29686 + #endif
1.29687 +
1.29688 + int
1.29689 + main ()
1.29690 + {
1.29691 +-return f != dlopen;
1.29692 ++return dlopen ();
1.29693 + ;
1.29694 + return 0;
1.29695 + }
1.29696 + _ACEOF
1.29697 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29698 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29699 +- (eval $ac_link) 2>conftest.er1
1.29700 ++if { (ac_try="$ac_link"
1.29701 ++case "(($ac_try" in
1.29702 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29703 ++ *) ac_try_echo=$ac_try;;
1.29704 ++esac
1.29705 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29706 ++ (eval "$ac_link") 2>conftest.er1
1.29707 + ac_status=$?
1.29708 + grep -v '^ *+' conftest.er1 >conftest.err
1.29709 + rm -f conftest.er1
1.29710 + cat conftest.err >&5
1.29711 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29712 +- (exit $ac_status); } &&
1.29713 +- { ac_try='test -z "$ac_c_werror_flag"
1.29714 +- || test ! -s conftest.err'
1.29715 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29716 +- (eval $ac_try) 2>&5
1.29717 +- ac_status=$?
1.29718 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29719 +- (exit $ac_status); }; } &&
1.29720 +- { ac_try='test -s conftest$ac_exeext'
1.29721 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29722 +- (eval $ac_try) 2>&5
1.29723 +- ac_status=$?
1.29724 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29725 +- (exit $ac_status); }; }; then
1.29726 ++ (exit $ac_status); } && {
1.29727 ++ test -z "$ac_c_werror_flag" ||
1.29728 ++ test ! -s conftest.err
1.29729 ++ } && test -s conftest$ac_exeext &&
1.29730 ++ $as_test_x conftest$ac_exeext; then
1.29731 + ac_cv_func_dlopen=yes
1.29732 + else
1.29733 + echo "$as_me: failed program was:" >&5
1.29734 + sed 's/^/| /' conftest.$ac_ext >&5
1.29735 +
1.29736 +-ac_cv_func_dlopen=no
1.29737 ++ ac_cv_func_dlopen=no
1.29738 + fi
1.29739 +-rm -f conftest.err conftest.$ac_objext \
1.29740 ++
1.29741 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29742 + conftest$ac_exeext conftest.$ac_ext
1.29743 + fi
1.29744 +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
1.29745 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
1.29746 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
1.29747 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
1.29748 + if test $ac_cv_func_dlopen = yes; then
1.29749 + lt_cv_dlopen="dlopen"
1.29750 + else
1.29751 +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
1.29752 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
1.29753 ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
1.29754 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
1.29755 + if test "${ac_cv_lib_dl_dlopen+set}" = set; then
1.29756 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.29757 + else
1.29758 +@@ -10794,61 +11880,58 @@
1.29759 + cat >>conftest.$ac_ext <<_ACEOF
1.29760 + /* end confdefs.h. */
1.29761 +
1.29762 +-/* Override any gcc2 internal prototype to avoid an error. */
1.29763 ++/* Override any GCC internal prototype to avoid an error.
1.29764 ++ Use char because int might match the return type of a GCC
1.29765 ++ builtin and then its argument prototype would still apply. */
1.29766 + #ifdef __cplusplus
1.29767 + extern "C"
1.29768 + #endif
1.29769 +-/* We use char because int might match the return type of a gcc2
1.29770 +- builtin and then its argument prototype would still apply. */
1.29771 + char dlopen ();
1.29772 + int
1.29773 + main ()
1.29774 + {
1.29775 +-dlopen ();
1.29776 ++return dlopen ();
1.29777 + ;
1.29778 + return 0;
1.29779 + }
1.29780 + _ACEOF
1.29781 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29782 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29783 +- (eval $ac_link) 2>conftest.er1
1.29784 ++if { (ac_try="$ac_link"
1.29785 ++case "(($ac_try" in
1.29786 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29787 ++ *) ac_try_echo=$ac_try;;
1.29788 ++esac
1.29789 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29790 ++ (eval "$ac_link") 2>conftest.er1
1.29791 + ac_status=$?
1.29792 + grep -v '^ *+' conftest.er1 >conftest.err
1.29793 + rm -f conftest.er1
1.29794 + cat conftest.err >&5
1.29795 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29796 +- (exit $ac_status); } &&
1.29797 +- { ac_try='test -z "$ac_c_werror_flag"
1.29798 +- || test ! -s conftest.err'
1.29799 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29800 +- (eval $ac_try) 2>&5
1.29801 +- ac_status=$?
1.29802 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29803 +- (exit $ac_status); }; } &&
1.29804 +- { ac_try='test -s conftest$ac_exeext'
1.29805 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29806 +- (eval $ac_try) 2>&5
1.29807 +- ac_status=$?
1.29808 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29809 +- (exit $ac_status); }; }; then
1.29810 ++ (exit $ac_status); } && {
1.29811 ++ test -z "$ac_c_werror_flag" ||
1.29812 ++ test ! -s conftest.err
1.29813 ++ } && test -s conftest$ac_exeext &&
1.29814 ++ $as_test_x conftest$ac_exeext; then
1.29815 + ac_cv_lib_dl_dlopen=yes
1.29816 + else
1.29817 + echo "$as_me: failed program was:" >&5
1.29818 + sed 's/^/| /' conftest.$ac_ext >&5
1.29819 +
1.29820 +-ac_cv_lib_dl_dlopen=no
1.29821 ++ ac_cv_lib_dl_dlopen=no
1.29822 + fi
1.29823 +-rm -f conftest.err conftest.$ac_objext \
1.29824 ++
1.29825 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29826 + conftest$ac_exeext conftest.$ac_ext
1.29827 + LIBS=$ac_check_lib_save_LIBS
1.29828 + fi
1.29829 +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
1.29830 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
1.29831 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
1.29832 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
1.29833 + if test $ac_cv_lib_dl_dlopen = yes; then
1.29834 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
1.29835 + else
1.29836 +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
1.29837 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
1.29838 ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
1.29839 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
1.29840 + if test "${ac_cv_lib_svld_dlopen+set}" = set; then
1.29841 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.29842 + else
1.29843 +@@ -10861,61 +11944,58 @@
1.29844 + cat >>conftest.$ac_ext <<_ACEOF
1.29845 + /* end confdefs.h. */
1.29846 +
1.29847 +-/* Override any gcc2 internal prototype to avoid an error. */
1.29848 ++/* Override any GCC internal prototype to avoid an error.
1.29849 ++ Use char because int might match the return type of a GCC
1.29850 ++ builtin and then its argument prototype would still apply. */
1.29851 + #ifdef __cplusplus
1.29852 + extern "C"
1.29853 + #endif
1.29854 +-/* We use char because int might match the return type of a gcc2
1.29855 +- builtin and then its argument prototype would still apply. */
1.29856 + char dlopen ();
1.29857 + int
1.29858 + main ()
1.29859 + {
1.29860 +-dlopen ();
1.29861 ++return dlopen ();
1.29862 + ;
1.29863 + return 0;
1.29864 + }
1.29865 + _ACEOF
1.29866 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29867 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29868 +- (eval $ac_link) 2>conftest.er1
1.29869 ++if { (ac_try="$ac_link"
1.29870 ++case "(($ac_try" in
1.29871 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29872 ++ *) ac_try_echo=$ac_try;;
1.29873 ++esac
1.29874 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29875 ++ (eval "$ac_link") 2>conftest.er1
1.29876 + ac_status=$?
1.29877 + grep -v '^ *+' conftest.er1 >conftest.err
1.29878 + rm -f conftest.er1
1.29879 + cat conftest.err >&5
1.29880 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29881 +- (exit $ac_status); } &&
1.29882 +- { ac_try='test -z "$ac_c_werror_flag"
1.29883 +- || test ! -s conftest.err'
1.29884 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29885 +- (eval $ac_try) 2>&5
1.29886 +- ac_status=$?
1.29887 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29888 +- (exit $ac_status); }; } &&
1.29889 +- { ac_try='test -s conftest$ac_exeext'
1.29890 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29891 +- (eval $ac_try) 2>&5
1.29892 +- ac_status=$?
1.29893 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29894 +- (exit $ac_status); }; }; then
1.29895 ++ (exit $ac_status); } && {
1.29896 ++ test -z "$ac_c_werror_flag" ||
1.29897 ++ test ! -s conftest.err
1.29898 ++ } && test -s conftest$ac_exeext &&
1.29899 ++ $as_test_x conftest$ac_exeext; then
1.29900 + ac_cv_lib_svld_dlopen=yes
1.29901 + else
1.29902 + echo "$as_me: failed program was:" >&5
1.29903 + sed 's/^/| /' conftest.$ac_ext >&5
1.29904 +
1.29905 +-ac_cv_lib_svld_dlopen=no
1.29906 ++ ac_cv_lib_svld_dlopen=no
1.29907 + fi
1.29908 +-rm -f conftest.err conftest.$ac_objext \
1.29909 ++
1.29910 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29911 + conftest$ac_exeext conftest.$ac_ext
1.29912 + LIBS=$ac_check_lib_save_LIBS
1.29913 + fi
1.29914 +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
1.29915 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
1.29916 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
1.29917 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
1.29918 + if test $ac_cv_lib_svld_dlopen = yes; then
1.29919 + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
1.29920 + else
1.29921 +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
1.29922 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
1.29923 ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
1.29924 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
1.29925 + if test "${ac_cv_lib_dld_dld_link+set}" = set; then
1.29926 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.29927 + else
1.29928 +@@ -10928,56 +12008,53 @@
1.29929 + cat >>conftest.$ac_ext <<_ACEOF
1.29930 + /* end confdefs.h. */
1.29931 +
1.29932 +-/* Override any gcc2 internal prototype to avoid an error. */
1.29933 ++/* Override any GCC internal prototype to avoid an error.
1.29934 ++ Use char because int might match the return type of a GCC
1.29935 ++ builtin and then its argument prototype would still apply. */
1.29936 + #ifdef __cplusplus
1.29937 + extern "C"
1.29938 + #endif
1.29939 +-/* We use char because int might match the return type of a gcc2
1.29940 +- builtin and then its argument prototype would still apply. */
1.29941 + char dld_link ();
1.29942 + int
1.29943 + main ()
1.29944 + {
1.29945 +-dld_link ();
1.29946 ++return dld_link ();
1.29947 + ;
1.29948 + return 0;
1.29949 + }
1.29950 + _ACEOF
1.29951 + rm -f conftest.$ac_objext conftest$ac_exeext
1.29952 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
1.29953 +- (eval $ac_link) 2>conftest.er1
1.29954 ++if { (ac_try="$ac_link"
1.29955 ++case "(($ac_try" in
1.29956 ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
1.29957 ++ *) ac_try_echo=$ac_try;;
1.29958 ++esac
1.29959 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
1.29960 ++ (eval "$ac_link") 2>conftest.er1
1.29961 + ac_status=$?
1.29962 + grep -v '^ *+' conftest.er1 >conftest.err
1.29963 + rm -f conftest.er1
1.29964 + cat conftest.err >&5
1.29965 + echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29966 +- (exit $ac_status); } &&
1.29967 +- { ac_try='test -z "$ac_c_werror_flag"
1.29968 +- || test ! -s conftest.err'
1.29969 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29970 +- (eval $ac_try) 2>&5
1.29971 +- ac_status=$?
1.29972 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29973 +- (exit $ac_status); }; } &&
1.29974 +- { ac_try='test -s conftest$ac_exeext'
1.29975 +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
1.29976 +- (eval $ac_try) 2>&5
1.29977 +- ac_status=$?
1.29978 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5
1.29979 +- (exit $ac_status); }; }; then
1.29980 ++ (exit $ac_status); } && {
1.29981 ++ test -z "$ac_c_werror_flag" ||
1.29982 ++ test ! -s conftest.err
1.29983 ++ } && test -s conftest$ac_exeext &&
1.29984 ++ $as_test_x conftest$ac_exeext; then
1.29985 + ac_cv_lib_dld_dld_link=yes
1.29986 + else
1.29987 + echo "$as_me: failed program was:" >&5
1.29988 + sed 's/^/| /' conftest.$ac_ext >&5
1.29989 +
1.29990 +-ac_cv_lib_dld_dld_link=no
1.29991 ++ ac_cv_lib_dld_dld_link=no
1.29992 + fi
1.29993 +-rm -f conftest.err conftest.$ac_objext \
1.29994 ++
1.29995 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
1.29996 + conftest$ac_exeext conftest.$ac_ext
1.29997 + LIBS=$ac_check_lib_save_LIBS
1.29998 + fi
1.29999 +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
1.30000 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
1.30001 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
1.30002 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
1.30003 + if test $ac_cv_lib_dld_dld_link = yes; then
1.30004 + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
1.30005 + fi
1.30006 +@@ -11017,8 +12094,8 @@
1.30007 + save_LIBS="$LIBS"
1.30008 + LIBS="$lt_cv_dlopen_libs $LIBS"
1.30009 +
1.30010 +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
1.30011 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
1.30012 ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
1.30013 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
1.30014 + if test "${lt_cv_dlopen_self+set}" = set; then
1.30015 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.30016 + else
1.30017 +@@ -11028,7 +12105,7 @@
1.30018 + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
1.30019 + lt_status=$lt_dlunknown
1.30020 + cat > conftest.$ac_ext <<_LT_EOF
1.30021 +-#line 11031 "configure"
1.30022 ++#line 12108 "configure"
1.30023 + #include "confdefs.h"
1.30024 +
1.30025 + #if HAVE_DLFCN_H
1.30026 +@@ -11108,13 +12185,13 @@
1.30027 +
1.30028 +
1.30029 + fi
1.30030 +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
1.30031 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
1.30032 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
1.30033 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
1.30034 +
1.30035 + if test "x$lt_cv_dlopen_self" = xyes; then
1.30036 + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
1.30037 +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
1.30038 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
1.30039 ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
1.30040 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
1.30041 + if test "${lt_cv_dlopen_self_static+set}" = set; then
1.30042 + echo $ECHO_N "(cached) $ECHO_C" >&6
1.30043 + else
1.30044 +@@ -11124,7 +12201,7 @@
1.30045 + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
1.30046 + lt_status=$lt_dlunknown
1.30047 + cat > conftest.$ac_ext <<_LT_EOF
1.30048 +-#line 11127 "configure"
1.30049 ++#line 12204 "configure"
1.30050 + #include "confdefs.h"
1.30051 +
1.30052 + #if HAVE_DLFCN_H
1.30053 +@@ -11204,8 +12281,8 @@
1.30054 +
1.30055 +
1.30056 + fi
1.30057 +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
1.30058 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
1.30059 ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
1.30060 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
1.30061 + fi
1.30062 +
1.30063 + CPPFLAGS="$save_CPPFLAGS"
1.30064 +@@ -11243,13 +12320,13 @@
1.30065 +
1.30066 + striplib=
1.30067 + old_striplib=
1.30068 +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
1.30069 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
1.30070 ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
1.30071 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
1.30072 + if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
1.30073 + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
1.30074 + test -z "$striplib" && striplib="$STRIP --strip-unneeded"
1.30075 +- echo "$as_me:$LINENO: result: yes" >&5
1.30076 +-echo "${ECHO_T}yes" >&6
1.30077 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.30078 ++echo "${ECHO_T}yes" >&6; }
1.30079 + else
1.30080 + # FIXME - insert some real tests, host_os isn't really good enough
1.30081 + case $host_os in
1.30082 +@@ -11257,16 +12334,16 @@
1.30083 + if test -n "$STRIP" ; then
1.30084 + striplib="$STRIP -x"
1.30085 + old_striplib="$STRIP -S"
1.30086 +- echo "$as_me:$LINENO: result: yes" >&5
1.30087 +-echo "${ECHO_T}yes" >&6
1.30088 ++ { echo "$as_me:$LINENO: result: yes" >&5
1.30089 ++echo "${ECHO_T}yes" >&6; }
1.30090 + else
1.30091 +- echo "$as_me:$LINENO: result: no" >&5
1.30092 +-echo "${ECHO_T}no" >&6
1.30093 ++ { echo "$as_me:$LINENO: result: no" >&5
1.30094 ++echo "${ECHO_T}no" >&6; }
1.30095 + fi
1.30096 + ;;
1.30097 + *)
1.30098 +- echo "$as_me:$LINENO: result: no" >&5
1.30099 +-echo "${ECHO_T}no" >&6
1.30100 ++ { echo "$as_me:$LINENO: result: no" >&5
1.30101 ++echo "${ECHO_T}no" >&6; }
1.30102 + ;;
1.30103 + esac
1.30104 + fi
1.30105 +@@ -11283,13 +12360,13 @@
1.30106 +
1.30107 +
1.30108 + # Report which library types will actually be built
1.30109 +- echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
1.30110 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
1.30111 +- echo "$as_me:$LINENO: result: $can_build_shared" >&5
1.30112 +-echo "${ECHO_T}$can_build_shared" >&6
1.30113 ++ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
1.30114 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
1.30115 ++ { echo "$as_me:$LINENO: result: $can_build_shared" >&5
1.30116 ++echo "${ECHO_T}$can_build_shared" >&6; }
1.30117 +
1.30118 +- echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
1.30119 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
1.30120 ++ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
1.30121 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
1.30122 + test "$can_build_shared" = "no" && enable_shared=no
1.30123 +
1.30124 + # On AIX, shared libraries and static libraries use the same namespace, and
1.30125 +@@ -11309,15 +12386,15 @@
1.30126 + fi
1.30127 + ;;
1.30128 + esac
1.30129 +- echo "$as_me:$LINENO: result: $enable_shared" >&5
1.30130 +-echo "${ECHO_T}$enable_shared" >&6
1.30131 ++ { echo "$as_me:$LINENO: result: $enable_shared" >&5
1.30132 ++echo "${ECHO_T}$enable_shared" >&6; }
1.30133 +
1.30134 +- echo "$as_me:$LINENO: checking whether to build static libraries" >&5
1.30135 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
1.30136 ++ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5
1.30137 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
1.30138 + # Make sure either enable_shared or enable_static is yes.
1.30139 + test "$enable_shared" = yes || enable_static=yes
1.30140 +- echo "$as_me:$LINENO: result: $enable_static" >&5
1.30141 +-echo "${ECHO_T}$enable_static" >&6
1.30142 ++ { echo "$as_me:$LINENO: result: $enable_static" >&5
1.30143 ++echo "${ECHO_T}$enable_static" >&6; }
1.30144 +
1.30145 +
1.30146 +
1.30147 +@@ -11343,7 +12420,7 @@
1.30148 +
1.30149 +
1.30150 +
1.30151 +- ac_config_commands="$ac_config_commands libtool"
1.30152 ++ ac_config_commands="$ac_config_commands libtool"
1.30153 +
1.30154 +
1.30155 +
1.30156 +@@ -11355,101 +12432,55 @@
1.30157 +
1.30158 + if test -n "${sys_dir}"; then
1.30159 + case ${sys_dir} in
1.30160 +- a29khif)
1.30161 +-
1.30162 +-subdirs="$subdirs a29khif"
1.30163 ++ a29khif) subdirs="$subdirs a29khif"
1.30164 + ;;
1.30165 +- arc)
1.30166 +-
1.30167 +-subdirs="$subdirs arc"
1.30168 ++ arc) subdirs="$subdirs arc"
1.30169 + ;;
1.30170 +- arm)
1.30171 +-
1.30172 +-subdirs="$subdirs arm"
1.30173 ++ arm) subdirs="$subdirs arm"
1.30174 + ;;
1.30175 +- d10v)
1.30176 +-
1.30177 +-subdirs="$subdirs d10v"
1.30178 ++ avr32) subdirs="$subdirs avr32"
1.30179 + ;;
1.30180 +- decstation)
1.30181 +-
1.30182 +-subdirs="$subdirs decstation"
1.30183 ++ d10v) subdirs="$subdirs d10v"
1.30184 + ;;
1.30185 +- h8300hms)
1.30186 +-
1.30187 +-subdirs="$subdirs h8300hms"
1.30188 ++ decstation) subdirs="$subdirs decstation"
1.30189 + ;;
1.30190 +- h8500hms)
1.30191 +-
1.30192 +-subdirs="$subdirs h8500hms"
1.30193 ++ h8300hms) subdirs="$subdirs h8300hms"
1.30194 + ;;
1.30195 +- linux)
1.30196 +-
1.30197 +-subdirs="$subdirs linux"
1.30198 ++ h8500hms) subdirs="$subdirs h8500hms"
1.30199 + ;;
1.30200 +- m88kbug)
1.30201 +-
1.30202 +-subdirs="$subdirs m88kbug"
1.30203 ++ linux) subdirs="$subdirs linux"
1.30204 + ;;
1.30205 +- mmixware)
1.30206 +-
1.30207 +-subdirs="$subdirs mmixware"
1.30208 ++ m88kbug) subdirs="$subdirs m88kbug"
1.30209 + ;;
1.30210 +- netware)
1.30211 +-
1.30212 +-subdirs="$subdirs netware"
1.30213 ++ mmixware) subdirs="$subdirs mmixware"
1.30214 + ;;
1.30215 +- rdos)
1.30216 +-
1.30217 +-subdirs="$subdirs rdos"
1.30218 ++ netware) subdirs="$subdirs netware"
1.30219 + ;;
1.30220 +- rtems)
1.30221 +-
1.30222 +-subdirs="$subdirs rtems"
1.30223 ++ rdos) subdirs="$subdirs rdos"
1.30224 + ;;
1.30225 +- sh)
1.30226 +-
1.30227 +-subdirs="$subdirs sh"
1.30228 ++ rtems) subdirs="$subdirs rtems"
1.30229 + ;;
1.30230 +- sparc64)
1.30231 +-
1.30232 +-subdirs="$subdirs sparc64"
1.30233 ++ sh) subdirs="$subdirs sh"
1.30234 + ;;
1.30235 +- sun4)
1.30236 +-
1.30237 +-subdirs="$subdirs sun4"
1.30238 ++ sparc64) subdirs="$subdirs sparc64"
1.30239 + ;;
1.30240 +- sysmec)
1.30241 +-
1.30242 +-subdirs="$subdirs sysmec"
1.30243 ++ sun4) subdirs="$subdirs sun4"
1.30244 + ;;
1.30245 +- sysnec810)
1.30246 +-
1.30247 +-subdirs="$subdirs sysnec810"
1.30248 ++ sysmec) subdirs="$subdirs sysmec"
1.30249 + ;;
1.30250 +- sysnecv850)
1.30251 +-
1.30252 +-subdirs="$subdirs sysnecv850"
1.30253 ++ sysnec810) subdirs="$subdirs sysnec810"
1.30254 + ;;
1.30255 +- sysvi386)
1.30256 +-
1.30257 +-subdirs="$subdirs sysvi386"
1.30258 ++ sysnecv850) subdirs="$subdirs sysnecv850"
1.30259 + ;;
1.30260 +- sysvnecv70)
1.30261 +-
1.30262 +-subdirs="$subdirs sysvnecv70"
1.30263 ++ sysvi386) subdirs="$subdirs sysvi386"
1.30264 + ;;
1.30265 +- tic80)
1.30266 +-
1.30267 +-subdirs="$subdirs tic80"
1.30268 ++ sysvnecv70) subdirs="$subdirs sysvnecv70"
1.30269 + ;;
1.30270 +- w65)
1.30271 +-
1.30272 +-subdirs="$subdirs w65"
1.30273 ++ tic80) subdirs="$subdirs tic80"
1.30274 + ;;
1.30275 +- z8ksim)
1.30276 +-
1.30277 +-subdirs="$subdirs z8ksim"
1.30278 ++ w65) subdirs="$subdirs w65"
1.30279 ++ ;;
1.30280 ++ z8ksim) subdirs="$subdirs z8ksim"
1.30281 + ;;
1.30282 + esac;
1.30283 + fi
1.30284 +@@ -11471,7 +12502,7 @@
1.30285 + fi
1.30286 +
1.30287 +
1.30288 +- ac_config_files="$ac_config_files Makefile"
1.30289 ++ac_config_files="$ac_config_files Makefile"
1.30290 +
1.30291 + cat >confcache <<\_ACEOF
1.30292 + # This file is a shell script that caches the results of configure
1.30293 +@@ -11491,39 +12522,58 @@
1.30294 +
1.30295 + # The following way of writing the cache mishandles newlines in values,
1.30296 + # but we know of no workaround that is simple, portable, and efficient.
1.30297 +-# So, don't put newlines in cache variables' values.
1.30298 ++# So, we kill variables containing newlines.
1.30299 + # Ultrix sh set writes to stderr and can't be redirected directly,
1.30300 + # and sets the high bit in the cache file unless we assign to the vars.
1.30301 +-{
1.30302 ++(
1.30303 ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
1.30304 ++ eval ac_val=\$$ac_var
1.30305 ++ case $ac_val in #(
1.30306 ++ *${as_nl}*)
1.30307 ++ case $ac_var in #(
1.30308 ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
1.30309 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
1.30310 ++ esac
1.30311 ++ case $ac_var in #(
1.30312 ++ _ | IFS | as_nl) ;; #(
1.30313 ++ *) $as_unset $ac_var ;;
1.30314 ++ esac ;;
1.30315 ++ esac
1.30316 ++ done
1.30317 ++
1.30318 + (set) 2>&1 |
1.30319 +- case `(ac_space=' '; set | grep ac_space) 2>&1` in
1.30320 +- *ac_space=\ *)
1.30321 ++ case $as_nl`(ac_space=' '; set) 2>&1` in #(
1.30322 ++ *${as_nl}ac_space=\ *)
1.30323 + # `set' does not quote correctly, so add quotes (double-quote
1.30324 + # substitution turns \\\\ into \\, and sed turns \\ into \).
1.30325 + sed -n \
1.30326 + "s/'/'\\\\''/g;
1.30327 + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1.30328 +- ;;
1.30329 ++ ;; #(
1.30330 + *)
1.30331 + # `set' quotes correctly as required by POSIX, so do not add quotes.
1.30332 +- sed -n \
1.30333 +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1.30334 ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
1.30335 + ;;
1.30336 +- esac;
1.30337 +-} |
1.30338 ++ esac |
1.30339 ++ sort
1.30340 ++) |
1.30341 + sed '
1.30342 ++ /^ac_cv_env_/b end
1.30343 + t clear
1.30344 +- : clear
1.30345 ++ :clear
1.30346 + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1.30347 + t end
1.30348 +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1.30349 +- : end' >>confcache
1.30350 +-if diff $cache_file confcache >/dev/null 2>&1; then :; else
1.30351 +- if test -w $cache_file; then
1.30352 +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
1.30353 ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1.30354 ++ :end' >>confcache
1.30355 ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
1.30356 ++ if test -w "$cache_file"; then
1.30357 ++ test "x$cache_file" != "x/dev/null" &&
1.30358 ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
1.30359 ++echo "$as_me: updating cache $cache_file" >&6;}
1.30360 + cat confcache >$cache_file
1.30361 + else
1.30362 +- echo "not updating unwritable cache $cache_file"
1.30363 ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
1.30364 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;}
1.30365 + fi
1.30366 + fi
1.30367 + rm -f confcache
1.30368 +@@ -11532,63 +12582,48 @@
1.30369 + # Let make expand exec_prefix.
1.30370 + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1.30371 +
1.30372 +-# VPATH may cause trouble with some makes, so we remove $(srcdir),
1.30373 +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1.30374 +-# trailing colons and then remove the whole line if VPATH becomes empty
1.30375 +-# (actually we leave an empty line to preserve line numbers).
1.30376 +-if test "x$srcdir" = x.; then
1.30377 +- ac_vpsub='/^[ ]*VPATH[ ]*=/{
1.30378 +-s/:*\$(srcdir):*/:/;
1.30379 +-s/:*\${srcdir}:*/:/;
1.30380 +-s/:*@srcdir@:*/:/;
1.30381 +-s/^\([^=]*=[ ]*\):*/\1/;
1.30382 +-s/:*$//;
1.30383 +-s/^[^=]*=[ ]*$//;
1.30384 +-}'
1.30385 +-fi
1.30386 +-
1.30387 + # Transform confdefs.h into DEFS.
1.30388 + # Protect against shell expansion while executing Makefile rules.
1.30389 + # Protect against Makefile macro expansion.
1.30390 + #
1.30391 + # If the first sed substitution is executed (which looks for macros that
1.30392 +-# take arguments), then we branch to the quote section. Otherwise,
1.30393 ++# take arguments), then branch to the quote section. Otherwise,
1.30394 + # look for a macro that doesn't take arguments.
1.30395 +-cat >confdef2opt.sed <<\_ACEOF
1.30396 ++ac_script='
1.30397 + t clear
1.30398 +-: clear
1.30399 +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
1.30400 ++:clear
1.30401 ++s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
1.30402 + t quote
1.30403 +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
1.30404 ++s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
1.30405 + t quote
1.30406 +-d
1.30407 +-: quote
1.30408 +-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
1.30409 +-s,\[,\\&,g
1.30410 +-s,\],\\&,g
1.30411 +-s,\$,$$,g
1.30412 +-p
1.30413 +-_ACEOF
1.30414 +-# We use echo to avoid assuming a particular line-breaking character.
1.30415 +-# The extra dot is to prevent the shell from consuming trailing
1.30416 +-# line-breaks from the sub-command output. A line-break within
1.30417 +-# single-quotes doesn't work because, if this script is created in a
1.30418 +-# platform that uses two characters for line-breaks (e.g., DOS), tr
1.30419 +-# would break.
1.30420 +-ac_LF_and_DOT=`echo; echo .`
1.30421 +-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
1.30422 +-rm -f confdef2opt.sed
1.30423 ++b any
1.30424 ++:quote
1.30425 ++s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
1.30426 ++s/\[/\\&/g
1.30427 ++s/\]/\\&/g
1.30428 ++s/\$/$$/g
1.30429 ++H
1.30430 ++:any
1.30431 ++${
1.30432 ++ g
1.30433 ++ s/^\n//
1.30434 ++ s/\n/ /g
1.30435 ++ p
1.30436 ++}
1.30437 ++'
1.30438 ++DEFS=`sed -n "$ac_script" confdefs.h`
1.30439 +
1.30440 +
1.30441 + ac_libobjs=
1.30442 + ac_ltlibobjs=
1.30443 + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
1.30444 + # 1. Remove the extension, and $U if already installed.
1.30445 +- ac_i=`echo "$ac_i" |
1.30446 +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
1.30447 +- # 2. Add them.
1.30448 +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
1.30449 +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
1.30450 ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
1.30451 ++ ac_i=`echo "$ac_i" | sed "$ac_script"`
1.30452 ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
1.30453 ++ # will be set to the directory where LIBOBJS objects are built.
1.30454 ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
1.30455 ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
1.30456 + done
1.30457 + LIBOBJS=$ac_libobjs
1.30458 +
1.30459 +@@ -11703,17 +12738,45 @@
1.30460 + ## M4sh Initialization. ##
1.30461 + ## --------------------- ##
1.30462 +
1.30463 +-# Be Bourne compatible
1.30464 ++# Be more Bourne compatible
1.30465 ++DUALCASE=1; export DUALCASE # for MKS sh
1.30466 + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1.30467 + emulate sh
1.30468 + NULLCMD=:
1.30469 + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1.30470 + # is contrary to our usage. Disable this feature.
1.30471 + alias -g '${1+"$@"}'='"$@"'
1.30472 +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1.30473 +- set -o posix
1.30474 ++ setopt NO_GLOB_SUBST
1.30475 ++else
1.30476 ++ case `(set -o) 2>/dev/null` in
1.30477 ++ *posix*) set -o posix ;;
1.30478 ++esac
1.30479 ++
1.30480 ++fi
1.30481 ++
1.30482 ++
1.30483 ++
1.30484 ++
1.30485 ++# PATH needs CR
1.30486 ++# Avoid depending upon Character Ranges.
1.30487 ++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.30488 ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.30489 ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.30490 ++as_cr_digits='0123456789'
1.30491 ++as_cr_alnum=$as_cr_Letters$as_cr_digits
1.30492 ++
1.30493 ++# The user is always right.
1.30494 ++if test "${PATH_SEPARATOR+set}" != set; then
1.30495 ++ echo "#! /bin/sh" >conf$$.sh
1.30496 ++ echo "exit 0" >>conf$$.sh
1.30497 ++ chmod +x conf$$.sh
1.30498 ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.30499 ++ PATH_SEPARATOR=';'
1.30500 ++ else
1.30501 ++ PATH_SEPARATOR=:
1.30502 ++ fi
1.30503 ++ rm -f conf$$.sh
1.30504 + fi
1.30505 +-DUALCASE=1; export DUALCASE # for MKS sh
1.30506 +
1.30507 + # Support unset when possible.
1.30508 + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1.30509 +@@ -11723,8 +12786,43 @@
1.30510 + fi
1.30511 +
1.30512 +
1.30513 ++# IFS
1.30514 ++# We need space, tab and new line, in precisely that order. Quoting is
1.30515 ++# there to prevent editors from complaining about space-tab.
1.30516 ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
1.30517 ++# splitting by setting IFS to empty value.)
1.30518 ++as_nl='
1.30519 ++'
1.30520 ++IFS=" "" $as_nl"
1.30521 ++
1.30522 ++# Find who we are. Look in the path if we contain no directory separator.
1.30523 ++case $0 in
1.30524 ++ *[\\/]* ) as_myself=$0 ;;
1.30525 ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.30526 ++for as_dir in $PATH
1.30527 ++do
1.30528 ++ IFS=$as_save_IFS
1.30529 ++ test -z "$as_dir" && as_dir=.
1.30530 ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.30531 ++done
1.30532 ++IFS=$as_save_IFS
1.30533 ++
1.30534 ++ ;;
1.30535 ++esac
1.30536 ++# We did not find ourselves, most probably we were run as `sh COMMAND'
1.30537 ++# in which case we are not to be found in the path.
1.30538 ++if test "x$as_myself" = x; then
1.30539 ++ as_myself=$0
1.30540 ++fi
1.30541 ++if test ! -f "$as_myself"; then
1.30542 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
1.30543 ++ { (exit 1); exit 1; }
1.30544 ++fi
1.30545 ++
1.30546 + # Work around bugs in pre-3.0 UWIN ksh.
1.30547 +-$as_unset ENV MAIL MAILPATH
1.30548 ++for as_var in ENV MAIL MAILPATH
1.30549 ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.30550 ++done
1.30551 + PS1='$ '
1.30552 + PS2='> '
1.30553 + PS4='+ '
1.30554 +@@ -11738,18 +12836,19 @@
1.30555 + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1.30556 + eval $as_var=C; export $as_var
1.30557 + else
1.30558 +- $as_unset $as_var
1.30559 ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
1.30560 + fi
1.30561 + done
1.30562 +
1.30563 + # Required to use basename.
1.30564 +-if expr a : '\(a\)' >/dev/null 2>&1; then
1.30565 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.30566 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.30567 + as_expr=expr
1.30568 + else
1.30569 + as_expr=false
1.30570 + fi
1.30571 +
1.30572 +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
1.30573 ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
1.30574 + as_basename=basename
1.30575 + else
1.30576 + as_basename=false
1.30577 +@@ -11757,159 +12856,120 @@
1.30578 +
1.30579 +
1.30580 + # Name of the executable.
1.30581 +-as_me=`$as_basename "$0" ||
1.30582 ++as_me=`$as_basename -- "$0" ||
1.30583 + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1.30584 + X"$0" : 'X\(//\)$' \| \
1.30585 +- X"$0" : 'X\(/\)$' \| \
1.30586 +- . : '\(.\)' 2>/dev/null ||
1.30587 ++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
1.30588 + echo X/"$0" |
1.30589 +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
1.30590 +- /^X\/\(\/\/\)$/{ s//\1/; q; }
1.30591 +- /^X\/\(\/\).*/{ s//\1/; q; }
1.30592 +- s/.*/./; q'`
1.30593 +-
1.30594 +-
1.30595 +-# PATH needs CR, and LINENO needs CR and PATH.
1.30596 +-# Avoid depending upon Character Ranges.
1.30597 +-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1.30598 +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1.30599 +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1.30600 +-as_cr_digits='0123456789'
1.30601 +-as_cr_alnum=$as_cr_Letters$as_cr_digits
1.30602 +-
1.30603 +-# The user is always right.
1.30604 +-if test "${PATH_SEPARATOR+set}" != set; then
1.30605 +- echo "#! /bin/sh" >conf$$.sh
1.30606 +- echo "exit 0" >>conf$$.sh
1.30607 +- chmod +x conf$$.sh
1.30608 +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1.30609 +- PATH_SEPARATOR=';'
1.30610 +- else
1.30611 +- PATH_SEPARATOR=:
1.30612 +- fi
1.30613 +- rm -f conf$$.sh
1.30614 +-fi
1.30615 ++ sed '/^.*\/\([^/][^/]*\)\/*$/{
1.30616 ++ s//\1/
1.30617 ++ q
1.30618 ++ }
1.30619 ++ /^X\/\(\/\/\)$/{
1.30620 ++ s//\1/
1.30621 ++ q
1.30622 ++ }
1.30623 ++ /^X\/\(\/\).*/{
1.30624 ++ s//\1/
1.30625 ++ q
1.30626 ++ }
1.30627 ++ s/.*/./; q'`
1.30628 ++
1.30629 ++# CDPATH.
1.30630 ++$as_unset CDPATH
1.30631 +
1.30632 +
1.30633 +- as_lineno_1=$LINENO
1.30634 +- as_lineno_2=$LINENO
1.30635 +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1.30636 +- test "x$as_lineno_1" != "x$as_lineno_2" &&
1.30637 +- test "x$as_lineno_3" = "x$as_lineno_2" || {
1.30638 +- # Find who we are. Look in the path if we contain no path at all
1.30639 +- # relative or not.
1.30640 +- case $0 in
1.30641 +- *[\\/]* ) as_myself=$0 ;;
1.30642 +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.30643 +-for as_dir in $PATH
1.30644 +-do
1.30645 +- IFS=$as_save_IFS
1.30646 +- test -z "$as_dir" && as_dir=.
1.30647 +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1.30648 +-done
1.30649 +
1.30650 +- ;;
1.30651 +- esac
1.30652 +- # We did not find ourselves, most probably we were run as `sh COMMAND'
1.30653 +- # in which case we are not to be found in the path.
1.30654 +- if test "x$as_myself" = x; then
1.30655 +- as_myself=$0
1.30656 +- fi
1.30657 +- if test ! -f "$as_myself"; then
1.30658 +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
1.30659 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
1.30660 +- { (exit 1); exit 1; }; }
1.30661 +- fi
1.30662 +- case $CONFIG_SHELL in
1.30663 +- '')
1.30664 +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1.30665 +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1.30666 +-do
1.30667 +- IFS=$as_save_IFS
1.30668 +- test -z "$as_dir" && as_dir=.
1.30669 +- for as_base in sh bash ksh sh5; do
1.30670 +- case $as_dir in
1.30671 +- /*)
1.30672 +- if ("$as_dir/$as_base" -c '
1.30673 + as_lineno_1=$LINENO
1.30674 + as_lineno_2=$LINENO
1.30675 +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1.30676 + test "x$as_lineno_1" != "x$as_lineno_2" &&
1.30677 +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
1.30678 +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
1.30679 +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
1.30680 +- CONFIG_SHELL=$as_dir/$as_base
1.30681 +- export CONFIG_SHELL
1.30682 +- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
1.30683 +- fi;;
1.30684 +- esac
1.30685 +- done
1.30686 +-done
1.30687 +-;;
1.30688 +- esac
1.30689 ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
1.30690 +
1.30691 + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1.30692 + # uniformly replaced by the line number. The first 'sed' inserts a
1.30693 +- # line-number line before each line; the second 'sed' does the real
1.30694 +- # work. The second script uses 'N' to pair each line-number line
1.30695 +- # with the numbered line, and appends trailing '-' during
1.30696 +- # substitution so that $LINENO is not a special case at line end.
1.30697 ++ # line-number line after each line using $LINENO; the second 'sed'
1.30698 ++ # does the real work. The second script uses 'N' to pair each
1.30699 ++ # line-number line with the line containing $LINENO, and appends
1.30700 ++ # trailing '-' during substitution so that $LINENO is not a special
1.30701 ++ # case at line end.
1.30702 + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1.30703 +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
1.30704 +- sed '=' <$as_myself |
1.30705 ++ # scripts with optimization help from Paolo Bonzini. Blame Lee
1.30706 ++ # E. McMahon (1931-1989) for sed's syntax. :-)
1.30707 ++ sed -n '
1.30708 ++ p
1.30709 ++ /[$]LINENO/=
1.30710 ++ ' <$as_myself |
1.30711 + sed '
1.30712 ++ s/[$]LINENO.*/&-/
1.30713 ++ t lineno
1.30714 ++ b
1.30715 ++ :lineno
1.30716 + N
1.30717 +- s,$,-,
1.30718 +- : loop
1.30719 +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
1.30720 ++ :loop
1.30721 ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
1.30722 + t loop
1.30723 +- s,-$,,
1.30724 +- s,^['$as_cr_digits']*\n,,
1.30725 ++ s/-\n.*//
1.30726 + ' >$as_me.lineno &&
1.30727 +- chmod +x $as_me.lineno ||
1.30728 +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
1.30729 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
1.30730 ++ chmod +x "$as_me.lineno" ||
1.30731 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
1.30732 + { (exit 1); exit 1; }; }
1.30733 +
1.30734 + # Don't try to exec as it changes $[0], causing all sort of problems
1.30735 + # (the dirname of $[0] is not the place where we might find the
1.30736 +- # original and so on. Autoconf is especially sensible to this).
1.30737 +- . ./$as_me.lineno
1.30738 ++ # original and so on. Autoconf is especially sensitive to this).
1.30739 ++ . "./$as_me.lineno"
1.30740 + # Exit status is that of the last command.
1.30741 + exit
1.30742 + }
1.30743 +
1.30744 +
1.30745 +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1.30746 +- *c*,-n*) ECHO_N= ECHO_C='
1.30747 +-' ECHO_T=' ' ;;
1.30748 +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
1.30749 +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
1.30750 ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
1.30751 ++ as_dirname=dirname
1.30752 ++else
1.30753 ++ as_dirname=false
1.30754 ++fi
1.30755 ++
1.30756 ++ECHO_C= ECHO_N= ECHO_T=
1.30757 ++case `echo -n x` in
1.30758 ++-n*)
1.30759 ++ case `echo 'x\c'` in
1.30760 ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
1.30761 ++ *) ECHO_C='\c';;
1.30762 ++ esac;;
1.30763 ++*)
1.30764 ++ ECHO_N='-n';;
1.30765 + esac
1.30766 +
1.30767 +-if expr a : '\(a\)' >/dev/null 2>&1; then
1.30768 ++if expr a : '\(a\)' >/dev/null 2>&1 &&
1.30769 ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
1.30770 + as_expr=expr
1.30771 + else
1.30772 + as_expr=false
1.30773 + fi
1.30774 +
1.30775 + rm -f conf$$ conf$$.exe conf$$.file
1.30776 ++if test -d conf$$.dir; then
1.30777 ++ rm -f conf$$.dir/conf$$.file
1.30778 ++else
1.30779 ++ rm -f conf$$.dir
1.30780 ++ mkdir conf$$.dir
1.30781 ++fi
1.30782 + echo >conf$$.file
1.30783 + if ln -s conf$$.file conf$$ 2>/dev/null; then
1.30784 +- # We could just check for DJGPP; but this test a) works b) is more generic
1.30785 +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1.30786 +- if test -f conf$$.exe; then
1.30787 +- # Don't use ln at all; we don't have any links
1.30788 ++ as_ln_s='ln -s'
1.30789 ++ # ... but there are two gotchas:
1.30790 ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
1.30791 ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
1.30792 ++ # In both cases, we have to default to `cp -p'.
1.30793 ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
1.30794 + as_ln_s='cp -p'
1.30795 +- else
1.30796 +- as_ln_s='ln -s'
1.30797 +- fi
1.30798 + elif ln conf$$.file conf$$ 2>/dev/null; then
1.30799 + as_ln_s=ln
1.30800 + else
1.30801 + as_ln_s='cp -p'
1.30802 + fi
1.30803 +-rm -f conf$$ conf$$.exe conf$$.file
1.30804 ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
1.30805 ++rmdir conf$$.dir 2>/dev/null
1.30806 +
1.30807 + if mkdir -p . 2>/dev/null; then
1.30808 + as_mkdir_p=:
1.30809 +@@ -11918,7 +12978,28 @@
1.30810 + as_mkdir_p=false
1.30811 + fi
1.30812 +
1.30813 +-as_executable_p="test -f"
1.30814 ++if test -x / >/dev/null 2>&1; then
1.30815 ++ as_test_x='test -x'
1.30816 ++else
1.30817 ++ if ls -dL / >/dev/null 2>&1; then
1.30818 ++ as_ls_L_option=L
1.30819 ++ else
1.30820 ++ as_ls_L_option=
1.30821 ++ fi
1.30822 ++ as_test_x='
1.30823 ++ eval sh -c '\''
1.30824 ++ if test -d "$1"; then
1.30825 ++ test -d "$1/.";
1.30826 ++ else
1.30827 ++ case $1 in
1.30828 ++ -*)set "./$1";;
1.30829 ++ esac;
1.30830 ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
1.30831 ++ ???[sx]*):;;*)false;;esac;fi
1.30832 ++ '\'' sh
1.30833 ++ '
1.30834 ++fi
1.30835 ++as_executable_p=$as_test_x
1.30836 +
1.30837 + # Sed expression to map a string onto a valid CPP name.
1.30838 + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1.30839 +@@ -11927,31 +13008,14 @@
1.30840 + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1.30841 +
1.30842 +
1.30843 +-# IFS
1.30844 +-# We need space, tab and new line, in precisely that order.
1.30845 +-as_nl='
1.30846 +-'
1.30847 +-IFS=" $as_nl"
1.30848 +-
1.30849 +-# CDPATH.
1.30850 +-$as_unset CDPATH
1.30851 +-
1.30852 + exec 6>&1
1.30853 +
1.30854 +-# Open the log real soon, to keep \$[0] and so on meaningful, and to
1.30855 ++# Save the log message, to keep $[0] and so on meaningful, and to
1.30856 + # report actual input values of CONFIG_FILES etc. instead of their
1.30857 +-# values after options handling. Logging --version etc. is OK.
1.30858 +-exec 5>>config.log
1.30859 +-{
1.30860 +- echo
1.30861 +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1.30862 +-## Running $as_me. ##
1.30863 +-_ASBOX
1.30864 +-} >&5
1.30865 +-cat >&5 <<_CSEOF
1.30866 +-
1.30867 ++# values after options handling.
1.30868 ++ac_log="
1.30869 + This file was extended by newlib $as_me 1.17.0, which was
1.30870 +-generated by GNU Autoconf 2.59. Invocation command line was
1.30871 ++generated by GNU Autoconf 2.61. Invocation command line was
1.30872 +
1.30873 + CONFIG_FILES = $CONFIG_FILES
1.30874 + CONFIG_HEADERS = $CONFIG_HEADERS
1.30875 +@@ -11959,30 +13023,19 @@
1.30876 + CONFIG_COMMANDS = $CONFIG_COMMANDS
1.30877 + $ $0 $@
1.30878 +
1.30879 +-_CSEOF
1.30880 +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
1.30881 +-echo >&5
1.30882 ++on `(hostname || uname -n) 2>/dev/null | sed 1q`
1.30883 ++"
1.30884 ++
1.30885 + _ACEOF
1.30886 +
1.30887 ++cat >>$CONFIG_STATUS <<_ACEOF
1.30888 + # Files that config.status was made for.
1.30889 +-if test -n "$ac_config_files"; then
1.30890 +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
1.30891 +-fi
1.30892 +-
1.30893 +-if test -n "$ac_config_headers"; then
1.30894 +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
1.30895 +-fi
1.30896 +-
1.30897 +-if test -n "$ac_config_links"; then
1.30898 +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
1.30899 +-fi
1.30900 ++config_files="$ac_config_files"
1.30901 ++config_commands="$ac_config_commands"
1.30902 +
1.30903 +-if test -n "$ac_config_commands"; then
1.30904 +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
1.30905 +-fi
1.30906 ++_ACEOF
1.30907 +
1.30908 + cat >>$CONFIG_STATUS <<\_ACEOF
1.30909 +-
1.30910 + ac_cs_usage="\
1.30911 + \`$as_me' instantiates files from templates according to the
1.30912 + current configuration.
1.30913 +@@ -11990,7 +13043,7 @@
1.30914 + Usage: $0 [OPTIONS] [FILE]...
1.30915 +
1.30916 + -h, --help print this help, then exit
1.30917 +- -V, --version print version number, then exit
1.30918 ++ -V, --version print version number and configuration settings, then exit
1.30919 + -q, --quiet do not print progress messages
1.30920 + -d, --debug don't remove temporary files
1.30921 + --recheck update $as_me by reconfiguring in the same conditions
1.30922 +@@ -12004,19 +13057,21 @@
1.30923 + $config_commands
1.30924 +
1.30925 + Report bugs to <bug-autoconf@gnu.org>."
1.30926 +-_ACEOF
1.30927 +
1.30928 ++_ACEOF
1.30929 + cat >>$CONFIG_STATUS <<_ACEOF
1.30930 + ac_cs_version="\\
1.30931 + newlib config.status 1.17.0
1.30932 +-configured by $0, generated by GNU Autoconf 2.59,
1.30933 +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
1.30934 ++configured by $0, generated by GNU Autoconf 2.61,
1.30935 ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
1.30936 +
1.30937 +-Copyright (C) 2003 Free Software Foundation, Inc.
1.30938 ++Copyright (C) 2006 Free Software Foundation, Inc.
1.30939 + This config.status script is free software; the Free Software Foundation
1.30940 + gives unlimited permission to copy, distribute and modify it."
1.30941 +-srcdir=$srcdir
1.30942 +-INSTALL="$INSTALL"
1.30943 ++
1.30944 ++ac_pwd='$ac_pwd'
1.30945 ++srcdir='$srcdir'
1.30946 ++INSTALL='$INSTALL'
1.30947 + _ACEOF
1.30948 +
1.30949 + cat >>$CONFIG_STATUS <<\_ACEOF
1.30950 +@@ -12027,60 +13082,42 @@
1.30951 + do
1.30952 + case $1 in
1.30953 + --*=*)
1.30954 +- ac_option=`expr "x$1" : 'x\([^=]*\)='`
1.30955 +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
1.30956 ++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
1.30957 ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
1.30958 + ac_shift=:
1.30959 + ;;
1.30960 +- -*)
1.30961 ++ *)
1.30962 + ac_option=$1
1.30963 + ac_optarg=$2
1.30964 + ac_shift=shift
1.30965 + ;;
1.30966 +- *) # This is not an option, so the user has probably given explicit
1.30967 +- # arguments.
1.30968 +- ac_option=$1
1.30969 +- ac_need_defaults=false;;
1.30970 + esac
1.30971 +
1.30972 + case $ac_option in
1.30973 + # Handling of the options.
1.30974 +-_ACEOF
1.30975 +-cat >>$CONFIG_STATUS <<\_ACEOF
1.30976 + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
1.30977 + ac_cs_recheck=: ;;
1.30978 +- --version | --vers* | -V )
1.30979 +- echo "$ac_cs_version"; exit 0 ;;
1.30980 +- --he | --h)
1.30981 +- # Conflict between --help and --header
1.30982 +- { { echo "$as_me:$LINENO: error: ambiguous option: $1
1.30983 +-Try \`$0 --help' for more information." >&5
1.30984 +-echo "$as_me: error: ambiguous option: $1
1.30985 +-Try \`$0 --help' for more information." >&2;}
1.30986 +- { (exit 1); exit 1; }; };;
1.30987 +- --help | --hel | -h )
1.30988 +- echo "$ac_cs_usage"; exit 0 ;;
1.30989 +- --debug | --d* | -d )
1.30990 ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
1.30991 ++ echo "$ac_cs_version"; exit ;;
1.30992 ++ --debug | --debu | --deb | --de | --d | -d )
1.30993 + debug=: ;;
1.30994 + --file | --fil | --fi | --f )
1.30995 + $ac_shift
1.30996 + CONFIG_FILES="$CONFIG_FILES $ac_optarg"
1.30997 + ac_need_defaults=false;;
1.30998 +- --header | --heade | --head | --hea )
1.30999 +- $ac_shift
1.31000 +- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
1.31001 +- ac_need_defaults=false;;
1.31002 ++ --he | --h | --help | --hel | -h )
1.31003 ++ echo "$ac_cs_usage"; exit ;;
1.31004 + -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1.31005 + | -silent | --silent | --silen | --sile | --sil | --si | --s)
1.31006 + ac_cs_silent=: ;;
1.31007 +
1.31008 + # This is an error.
1.31009 +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
1.31010 +-Try \`$0 --help' for more information." >&5
1.31011 +-echo "$as_me: error: unrecognized option: $1
1.31012 +-Try \`$0 --help' for more information." >&2;}
1.31013 ++ -*) { echo "$as_me: error: unrecognized option: $1
1.31014 ++Try \`$0 --help' for more information." >&2
1.31015 + { (exit 1); exit 1; }; } ;;
1.31016 +
1.31017 +- *) ac_config_targets="$ac_config_targets $1" ;;
1.31018 ++ *) ac_config_targets="$ac_config_targets $1"
1.31019 ++ ac_need_defaults=false ;;
1.31020 +
1.31021 + esac
1.31022 + shift
1.31023 +@@ -12096,17 +13133,28 @@
1.31024 + _ACEOF
1.31025 + cat >>$CONFIG_STATUS <<_ACEOF
1.31026 + if \$ac_cs_recheck; then
1.31027 +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
1.31028 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
1.31029 ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
1.31030 ++ CONFIG_SHELL=$SHELL
1.31031 ++ export CONFIG_SHELL
1.31032 ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
1.31033 + fi
1.31034 +
1.31035 + _ACEOF
1.31036 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.31037 ++exec 5>>config.log
1.31038 ++{
1.31039 ++ echo
1.31040 ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1.31041 ++## Running $as_me. ##
1.31042 ++_ASBOX
1.31043 ++ echo "$ac_log"
1.31044 ++} >&5
1.31045 +
1.31046 ++_ACEOF
1.31047 + cat >>$CONFIG_STATUS <<_ACEOF
1.31048 + #
1.31049 +-# INIT-COMMANDS section.
1.31050 ++# INIT-COMMANDS
1.31051 + #
1.31052 +-
1.31053 + AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
1.31054 +
1.31055 +
1.31056 +@@ -12367,22 +13415,23 @@
1.31057 +
1.31058 + _ACEOF
1.31059 +
1.31060 +-
1.31061 +-
1.31062 + cat >>$CONFIG_STATUS <<\_ACEOF
1.31063 ++
1.31064 ++# Handling of arguments.
1.31065 + for ac_config_target in $ac_config_targets
1.31066 + do
1.31067 +- case "$ac_config_target" in
1.31068 +- # Handling of arguments.
1.31069 +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
1.31070 +- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
1.31071 +- "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
1.31072 ++ case $ac_config_target in
1.31073 ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
1.31074 ++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
1.31075 ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
1.31076 ++
1.31077 + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
1.31078 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
1.31079 + { (exit 1); exit 1; }; };;
1.31080 + esac
1.31081 + done
1.31082 +
1.31083 ++
1.31084 + # If the user did not use the arguments to specify the items to instantiate,
1.31085 + # then the envvar interface is used. Set only those that are not.
1.31086 + # We use the long form for the default assignment because of an extremely
1.31087 +@@ -12393,397 +13442,493 @@
1.31088 + fi
1.31089 +
1.31090 + # Have a temporary directory for convenience. Make it in the build tree
1.31091 +-# simply because there is no reason to put it here, and in addition,
1.31092 ++# simply because there is no reason against having it here, and in addition,
1.31093 + # creating and moving files from /tmp can sometimes cause problems.
1.31094 +-# Create a temporary directory, and hook for its removal unless debugging.
1.31095 ++# Hook for its removal unless debugging.
1.31096 ++# Note that there is a small window in which the directory will not be cleaned:
1.31097 ++# after its creation but before its name has been assigned to `$tmp'.
1.31098 + $debug ||
1.31099 + {
1.31100 +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
1.31101 ++ tmp=
1.31102 ++ trap 'exit_status=$?
1.31103 ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
1.31104 ++' 0
1.31105 + trap '{ (exit 1); exit 1; }' 1 2 13 15
1.31106 + }
1.31107 +-
1.31108 + # Create a (secure) tmp directory for tmp files.
1.31109 +
1.31110 + {
1.31111 +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
1.31112 ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
1.31113 + test -n "$tmp" && test -d "$tmp"
1.31114 + } ||
1.31115 + {
1.31116 +- tmp=./confstat$$-$RANDOM
1.31117 +- (umask 077 && mkdir $tmp)
1.31118 ++ tmp=./conf$$-$RANDOM
1.31119 ++ (umask 077 && mkdir "$tmp")
1.31120 + } ||
1.31121 + {
1.31122 + echo "$me: cannot create a temporary directory in ." >&2
1.31123 + { (exit 1); exit 1; }
1.31124 + }
1.31125 +
1.31126 +-_ACEOF
1.31127 +-
1.31128 +-cat >>$CONFIG_STATUS <<_ACEOF
1.31129 +-
1.31130 + #
1.31131 +-# CONFIG_FILES section.
1.31132 ++# Set up the sed scripts for CONFIG_FILES section.
1.31133 + #
1.31134 +
1.31135 + # No need to generate the scripts if there are no CONFIG_FILES.
1.31136 + # This happens for instance when ./config.status config.h
1.31137 +-if test -n "\$CONFIG_FILES"; then
1.31138 +- # Protect against being on the right side of a sed subst in config.status.
1.31139 +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
1.31140 +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
1.31141 +-s,@SHELL@,$SHELL,;t t
1.31142 +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
1.31143 +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
1.31144 +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
1.31145 +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
1.31146 +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
1.31147 +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
1.31148 +-s,@exec_prefix@,$exec_prefix,;t t
1.31149 +-s,@prefix@,$prefix,;t t
1.31150 +-s,@program_transform_name@,$program_transform_name,;t t
1.31151 +-s,@bindir@,$bindir,;t t
1.31152 +-s,@sbindir@,$sbindir,;t t
1.31153 +-s,@libexecdir@,$libexecdir,;t t
1.31154 +-s,@datadir@,$datadir,;t t
1.31155 +-s,@sysconfdir@,$sysconfdir,;t t
1.31156 +-s,@sharedstatedir@,$sharedstatedir,;t t
1.31157 +-s,@localstatedir@,$localstatedir,;t t
1.31158 +-s,@libdir@,$libdir,;t t
1.31159 +-s,@includedir@,$includedir,;t t
1.31160 +-s,@oldincludedir@,$oldincludedir,;t t
1.31161 +-s,@infodir@,$infodir,;t t
1.31162 +-s,@mandir@,$mandir,;t t
1.31163 +-s,@build_alias@,$build_alias,;t t
1.31164 +-s,@host_alias@,$host_alias,;t t
1.31165 +-s,@target_alias@,$target_alias,;t t
1.31166 +-s,@DEFS@,$DEFS,;t t
1.31167 +-s,@ECHO_C@,$ECHO_C,;t t
1.31168 +-s,@ECHO_N@,$ECHO_N,;t t
1.31169 +-s,@ECHO_T@,$ECHO_T,;t t
1.31170 +-s,@LIBS@,$LIBS,;t t
1.31171 +-s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t
1.31172 +-s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t
1.31173 +-s,@newlib_basedir@,$newlib_basedir,;t t
1.31174 +-s,@build@,$build,;t t
1.31175 +-s,@build_cpu@,$build_cpu,;t t
1.31176 +-s,@build_vendor@,$build_vendor,;t t
1.31177 +-s,@build_os@,$build_os,;t t
1.31178 +-s,@host@,$host,;t t
1.31179 +-s,@host_cpu@,$host_cpu,;t t
1.31180 +-s,@host_vendor@,$host_vendor,;t t
1.31181 +-s,@host_os@,$host_os,;t t
1.31182 +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
1.31183 +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
1.31184 +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
1.31185 +-s,@CYGPATH_W@,$CYGPATH_W,;t t
1.31186 +-s,@PACKAGE@,$PACKAGE,;t t
1.31187 +-s,@VERSION@,$VERSION,;t t
1.31188 +-s,@ACLOCAL@,$ACLOCAL,;t t
1.31189 +-s,@AUTOCONF@,$AUTOCONF,;t t
1.31190 +-s,@AUTOMAKE@,$AUTOMAKE,;t t
1.31191 +-s,@AUTOHEADER@,$AUTOHEADER,;t t
1.31192 +-s,@MAKEINFO@,$MAKEINFO,;t t
1.31193 +-s,@install_sh@,$install_sh,;t t
1.31194 +-s,@STRIP@,$STRIP,;t t
1.31195 +-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
1.31196 +-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
1.31197 +-s,@mkdir_p@,$mkdir_p,;t t
1.31198 +-s,@AWK@,$AWK,;t t
1.31199 +-s,@SET_MAKE@,$SET_MAKE,;t t
1.31200 +-s,@am__leading_dot@,$am__leading_dot,;t t
1.31201 +-s,@AMTAR@,$AMTAR,;t t
1.31202 +-s,@am__tar@,$am__tar,;t t
1.31203 +-s,@am__untar@,$am__untar,;t t
1.31204 +-s,@CC@,$CC,;t t
1.31205 +-s,@DEPDIR@,$DEPDIR,;t t
1.31206 +-s,@am__include@,$am__include,;t t
1.31207 +-s,@am__quote@,$am__quote,;t t
1.31208 +-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
1.31209 +-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
1.31210 +-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
1.31211 +-s,@CCDEPMODE@,$CCDEPMODE,;t t
1.31212 +-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
1.31213 +-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
1.31214 +-s,@AS@,$AS,;t t
1.31215 +-s,@ac_ct_AS@,$ac_ct_AS,;t t
1.31216 +-s,@AR@,$AR,;t t
1.31217 +-s,@ac_ct_AR@,$ac_ct_AR,;t t
1.31218 +-s,@RANLIB@,$RANLIB,;t t
1.31219 +-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
1.31220 +-s,@READELF@,$READELF,;t t
1.31221 +-s,@ac_ct_READELF@,$ac_ct_READELF,;t t
1.31222 +-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
1.31223 +-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
1.31224 +-s,@MAINT@,$MAINT,;t t
1.31225 +-s,@CCAS@,$CCAS,;t t
1.31226 +-s,@CCASFLAGS@,$CCASFLAGS,;t t
1.31227 +-s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t
1.31228 +-s,@LDFLAGS@,$LDFLAGS,;t t
1.31229 +-s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t
1.31230 +-s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t
1.31231 +-s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t
1.31232 +-s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t
1.31233 +-s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t
1.31234 +-s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t
1.31235 +-s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t
1.31236 +-s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t
1.31237 +-s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t
1.31238 +-s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t
1.31239 +-s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t
1.31240 +-s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t
1.31241 +-s,@OBJEXT@,$OBJEXT,;t t
1.31242 +-s,@oext@,$oext,;t t
1.31243 +-s,@aext@,$aext,;t t
1.31244 +-s,@lpfx@,$lpfx,;t t
1.31245 +-s,@libm_machine_dir@,$libm_machine_dir,;t t
1.31246 +-s,@machine_dir@,$machine_dir,;t t
1.31247 +-s,@sys_dir@,$sys_dir,;t t
1.31248 +-s,@SED@,$SED,;t t
1.31249 +-s,@DLLTOOL@,$DLLTOOL,;t t
1.31250 +-s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t
1.31251 +-s,@OBJDUMP@,$OBJDUMP,;t t
1.31252 +-s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t
1.31253 +-s,@LIBTOOL@,$LIBTOOL,;t t
1.31254 +-s,@CFLAGS@,$CFLAGS,;t t
1.31255 +-s,@CPPFLAGS@,$CPPFLAGS,;t t
1.31256 +-s,@ac_ct_CC@,$ac_ct_CC,;t t
1.31257 +-s,@EXEEXT@,$EXEEXT,;t t
1.31258 +-s,@EGREP@,$EGREP,;t t
1.31259 +-s,@FGREP@,$FGREP,;t t
1.31260 +-s,@GREP@,$GREP,;t t
1.31261 +-s,@LD@,$LD,;t t
1.31262 +-s,@DUMPBIN@,$DUMPBIN,;t t
1.31263 +-s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t
1.31264 +-s,@NM@,$NM,;t t
1.31265 +-s,@LN_S@,$LN_S,;t t
1.31266 +-s,@lt_ECHO@,$lt_ECHO,;t t
1.31267 +-s,@DSYMUTIL@,$DSYMUTIL,;t t
1.31268 +-s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t
1.31269 +-s,@NMEDIT@,$NMEDIT,;t t
1.31270 +-s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t
1.31271 +-s,@LIPO@,$LIPO,;t t
1.31272 +-s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t
1.31273 +-s,@OTOOL@,$OTOOL,;t t
1.31274 +-s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t
1.31275 +-s,@OTOOL64@,$OTOOL64,;t t
1.31276 +-s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t
1.31277 +-s,@CPP@,$CPP,;t t
1.31278 +-s,@subdirs@,$subdirs,;t t
1.31279 +-s,@CRT0@,$CRT0,;t t
1.31280 +-s,@HAVE_SYS_DIR_TRUE@,$HAVE_SYS_DIR_TRUE,;t t
1.31281 +-s,@HAVE_SYS_DIR_FALSE@,$HAVE_SYS_DIR_FALSE,;t t
1.31282 +-s,@LIBOBJS@,$LIBOBJS,;t t
1.31283 +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
1.31284 +-CEOF
1.31285 +-
1.31286 +-_ACEOF
1.31287 +-
1.31288 +- cat >>$CONFIG_STATUS <<\_ACEOF
1.31289 +- # Split the substitutions into bite-sized pieces for seds with
1.31290 +- # small command number limits, like on Digital OSF/1 and HP-UX.
1.31291 +- ac_max_sed_lines=48
1.31292 +- ac_sed_frag=1 # Number of current file.
1.31293 +- ac_beg=1 # First line for current file.
1.31294 +- ac_end=$ac_max_sed_lines # Line after last line for current file.
1.31295 +- ac_more_lines=:
1.31296 +- ac_sed_cmds=
1.31297 +- while $ac_more_lines; do
1.31298 +- if test $ac_beg -gt 1; then
1.31299 +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
1.31300 +- else
1.31301 +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
1.31302 +- fi
1.31303 +- if test ! -s $tmp/subs.frag; then
1.31304 +- ac_more_lines=false
1.31305 +- else
1.31306 +- # The purpose of the label and of the branching condition is to
1.31307 +- # speed up the sed processing (if there are no `@' at all, there
1.31308 +- # is no need to browse any of the substitutions).
1.31309 +- # These are the two extra sed commands mentioned above.
1.31310 +- (echo ':t
1.31311 +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
1.31312 +- if test -z "$ac_sed_cmds"; then
1.31313 +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
1.31314 +- else
1.31315 +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
1.31316 +- fi
1.31317 +- ac_sed_frag=`expr $ac_sed_frag + 1`
1.31318 +- ac_beg=$ac_end
1.31319 +- ac_end=`expr $ac_end + $ac_max_sed_lines`
1.31320 +- fi
1.31321 +- done
1.31322 +- if test -z "$ac_sed_cmds"; then
1.31323 +- ac_sed_cmds=cat
1.31324 ++if test -n "$CONFIG_FILES"; then
1.31325 ++
1.31326 ++_ACEOF
1.31327 ++
1.31328 ++
1.31329 ++
1.31330 ++ac_delim='%!_!# '
1.31331 ++for ac_last_try in false false false false false :; do
1.31332 ++ cat >conf$$subs.sed <<_ACEOF
1.31333 ++SHELL!$SHELL$ac_delim
1.31334 ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
1.31335 ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim
1.31336 ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
1.31337 ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
1.31338 ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim
1.31339 ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
1.31340 ++exec_prefix!$exec_prefix$ac_delim
1.31341 ++prefix!$prefix$ac_delim
1.31342 ++program_transform_name!$program_transform_name$ac_delim
1.31343 ++bindir!$bindir$ac_delim
1.31344 ++sbindir!$sbindir$ac_delim
1.31345 ++libexecdir!$libexecdir$ac_delim
1.31346 ++datarootdir!$datarootdir$ac_delim
1.31347 ++datadir!$datadir$ac_delim
1.31348 ++sysconfdir!$sysconfdir$ac_delim
1.31349 ++sharedstatedir!$sharedstatedir$ac_delim
1.31350 ++localstatedir!$localstatedir$ac_delim
1.31351 ++includedir!$includedir$ac_delim
1.31352 ++oldincludedir!$oldincludedir$ac_delim
1.31353 ++docdir!$docdir$ac_delim
1.31354 ++infodir!$infodir$ac_delim
1.31355 ++htmldir!$htmldir$ac_delim
1.31356 ++dvidir!$dvidir$ac_delim
1.31357 ++pdfdir!$pdfdir$ac_delim
1.31358 ++psdir!$psdir$ac_delim
1.31359 ++libdir!$libdir$ac_delim
1.31360 ++localedir!$localedir$ac_delim
1.31361 ++mandir!$mandir$ac_delim
1.31362 ++DEFS!$DEFS$ac_delim
1.31363 ++ECHO_C!$ECHO_C$ac_delim
1.31364 ++ECHO_N!$ECHO_N$ac_delim
1.31365 ++ECHO_T!$ECHO_T$ac_delim
1.31366 ++LIBS!$LIBS$ac_delim
1.31367 ++build_alias!$build_alias$ac_delim
1.31368 ++host_alias!$host_alias$ac_delim
1.31369 ++target_alias!$target_alias$ac_delim
1.31370 ++MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim
1.31371 ++MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim
1.31372 ++newlib_basedir!$newlib_basedir$ac_delim
1.31373 ++build!$build$ac_delim
1.31374 ++build_cpu!$build_cpu$ac_delim
1.31375 ++build_vendor!$build_vendor$ac_delim
1.31376 ++build_os!$build_os$ac_delim
1.31377 ++host!$host$ac_delim
1.31378 ++host_cpu!$host_cpu$ac_delim
1.31379 ++host_vendor!$host_vendor$ac_delim
1.31380 ++host_os!$host_os$ac_delim
1.31381 ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
1.31382 ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
1.31383 ++INSTALL_DATA!$INSTALL_DATA$ac_delim
1.31384 ++CYGPATH_W!$CYGPATH_W$ac_delim
1.31385 ++PACKAGE!$PACKAGE$ac_delim
1.31386 ++VERSION!$VERSION$ac_delim
1.31387 ++ACLOCAL!$ACLOCAL$ac_delim
1.31388 ++AUTOCONF!$AUTOCONF$ac_delim
1.31389 ++AUTOMAKE!$AUTOMAKE$ac_delim
1.31390 ++AUTOHEADER!$AUTOHEADER$ac_delim
1.31391 ++MAKEINFO!$MAKEINFO$ac_delim
1.31392 ++install_sh!$install_sh$ac_delim
1.31393 ++STRIP!$STRIP$ac_delim
1.31394 ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
1.31395 ++mkdir_p!$mkdir_p$ac_delim
1.31396 ++AWK!$AWK$ac_delim
1.31397 ++SET_MAKE!$SET_MAKE$ac_delim
1.31398 ++am__leading_dot!$am__leading_dot$ac_delim
1.31399 ++AMTAR!$AMTAR$ac_delim
1.31400 ++am__tar!$am__tar$ac_delim
1.31401 ++am__untar!$am__untar$ac_delim
1.31402 ++CC!$CC$ac_delim
1.31403 ++DEPDIR!$DEPDIR$ac_delim
1.31404 ++am__include!$am__include$ac_delim
1.31405 ++am__quote!$am__quote$ac_delim
1.31406 ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim
1.31407 ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim
1.31408 ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
1.31409 ++CCDEPMODE!$CCDEPMODE$ac_delim
1.31410 ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
1.31411 ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
1.31412 ++AS!$AS$ac_delim
1.31413 ++AR!$AR$ac_delim
1.31414 ++RANLIB!$RANLIB$ac_delim
1.31415 ++READELF!$READELF$ac_delim
1.31416 ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
1.31417 ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
1.31418 ++MAINT!$MAINT$ac_delim
1.31419 ++CCAS!$CCAS$ac_delim
1.31420 ++CCASFLAGS!$CCASFLAGS$ac_delim
1.31421 ++NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim
1.31422 ++LDFLAGS!$LDFLAGS$ac_delim
1.31423 ++ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim
1.31424 ++ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim
1.31425 ++ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim
1.31426 ++ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim
1.31427 ++ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim
1.31428 ++ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim
1.31429 ++ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim
1.31430 ++_ACEOF
1.31431 ++
1.31432 ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
1.31433 ++ break
1.31434 ++ elif $ac_last_try; then
1.31435 ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
1.31436 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
1.31437 ++ { (exit 1); exit 1; }; }
1.31438 ++ else
1.31439 ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
1.31440 + fi
1.31441 +-fi # test -n "$CONFIG_FILES"
1.31442 ++done
1.31443 ++
1.31444 ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
1.31445 ++if test -n "$ac_eof"; then
1.31446 ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
1.31447 ++ ac_eof=`expr $ac_eof + 1`
1.31448 ++fi
1.31449 ++
1.31450 ++cat >>$CONFIG_STATUS <<_ACEOF
1.31451 ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
1.31452 ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
1.31453 ++_ACEOF
1.31454 ++sed '
1.31455 ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
1.31456 ++s/^/s,@/; s/!/@,|#_!!_#|/
1.31457 ++:n
1.31458 ++t n
1.31459 ++s/'"$ac_delim"'$/,g/; t
1.31460 ++s/$/\\/; p
1.31461 ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
1.31462 ++' >>$CONFIG_STATUS <conf$$subs.sed
1.31463 ++rm -f conf$$subs.sed
1.31464 ++cat >>$CONFIG_STATUS <<_ACEOF
1.31465 ++CEOF$ac_eof
1.31466 ++_ACEOF
1.31467 ++
1.31468 ++
1.31469 ++ac_delim='%!_!# '
1.31470 ++for ac_last_try in false false false false false :; do
1.31471 ++ cat >conf$$subs.sed <<_ACEOF
1.31472 ++ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim
1.31473 ++ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim
1.31474 ++ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim
1.31475 ++USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim
1.31476 ++USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim
1.31477 ++OBJEXT!$OBJEXT$ac_delim
1.31478 ++oext!$oext$ac_delim
1.31479 ++aext!$aext$ac_delim
1.31480 ++lpfx!$lpfx$ac_delim
1.31481 ++libm_machine_dir!$libm_machine_dir$ac_delim
1.31482 ++machine_dir!$machine_dir$ac_delim
1.31483 ++sys_dir!$sys_dir$ac_delim
1.31484 ++SED!$SED$ac_delim
1.31485 ++DLLTOOL!$DLLTOOL$ac_delim
1.31486 ++OBJDUMP!$OBJDUMP$ac_delim
1.31487 ++LIBTOOL!$LIBTOOL$ac_delim
1.31488 ++CFLAGS!$CFLAGS$ac_delim
1.31489 ++CPPFLAGS!$CPPFLAGS$ac_delim
1.31490 ++ac_ct_CC!$ac_ct_CC$ac_delim
1.31491 ++EXEEXT!$EXEEXT$ac_delim
1.31492 ++GREP!$GREP$ac_delim
1.31493 ++EGREP!$EGREP$ac_delim
1.31494 ++FGREP!$FGREP$ac_delim
1.31495 ++LD!$LD$ac_delim
1.31496 ++DUMPBIN!$DUMPBIN$ac_delim
1.31497 ++ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim
1.31498 ++NM!$NM$ac_delim
1.31499 ++LN_S!$LN_S$ac_delim
1.31500 ++lt_ECHO!$lt_ECHO$ac_delim
1.31501 ++DSYMUTIL!$DSYMUTIL$ac_delim
1.31502 ++NMEDIT!$NMEDIT$ac_delim
1.31503 ++LIPO!$LIPO$ac_delim
1.31504 ++OTOOL!$OTOOL$ac_delim
1.31505 ++OTOOL64!$OTOOL64$ac_delim
1.31506 ++CPP!$CPP$ac_delim
1.31507 ++subdirs!$subdirs$ac_delim
1.31508 ++CRT0!$CRT0$ac_delim
1.31509 ++HAVE_SYS_DIR_TRUE!$HAVE_SYS_DIR_TRUE$ac_delim
1.31510 ++HAVE_SYS_DIR_FALSE!$HAVE_SYS_DIR_FALSE$ac_delim
1.31511 ++LIBOBJS!$LIBOBJS$ac_delim
1.31512 ++LTLIBOBJS!$LTLIBOBJS$ac_delim
1.31513 ++_ACEOF
1.31514 ++
1.31515 ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 41; then
1.31516 ++ break
1.31517 ++ elif $ac_last_try; then
1.31518 ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
1.31519 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
1.31520 ++ { (exit 1); exit 1; }; }
1.31521 ++ else
1.31522 ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
1.31523 ++ fi
1.31524 ++done
1.31525 ++
1.31526 ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
1.31527 ++if test -n "$ac_eof"; then
1.31528 ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
1.31529 ++ ac_eof=`expr $ac_eof + 1`
1.31530 ++fi
1.31531 +
1.31532 ++cat >>$CONFIG_STATUS <<_ACEOF
1.31533 ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
1.31534 ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
1.31535 ++_ACEOF
1.31536 ++sed '
1.31537 ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
1.31538 ++s/^/s,@/; s/!/@,|#_!!_#|/
1.31539 ++:n
1.31540 ++t n
1.31541 ++s/'"$ac_delim"'$/,g/; t
1.31542 ++s/$/\\/; p
1.31543 ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
1.31544 ++' >>$CONFIG_STATUS <conf$$subs.sed
1.31545 ++rm -f conf$$subs.sed
1.31546 ++cat >>$CONFIG_STATUS <<_ACEOF
1.31547 ++:end
1.31548 ++s/|#_!!_#|//g
1.31549 ++CEOF$ac_eof
1.31550 + _ACEOF
1.31551 ++
1.31552 ++
1.31553 ++# VPATH may cause trouble with some makes, so we remove $(srcdir),
1.31554 ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1.31555 ++# trailing colons and then remove the whole line if VPATH becomes empty
1.31556 ++# (actually we leave an empty line to preserve line numbers).
1.31557 ++if test "x$srcdir" = x.; then
1.31558 ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
1.31559 ++s/:*\$(srcdir):*/:/
1.31560 ++s/:*\${srcdir}:*/:/
1.31561 ++s/:*@srcdir@:*/:/
1.31562 ++s/^\([^=]*=[ ]*\):*/\1/
1.31563 ++s/:*$//
1.31564 ++s/^[^=]*=[ ]*$//
1.31565 ++}'
1.31566 ++fi
1.31567 ++
1.31568 + cat >>$CONFIG_STATUS <<\_ACEOF
1.31569 +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
1.31570 +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
1.31571 +- case $ac_file in
1.31572 +- - | *:- | *:-:* ) # input from stdin
1.31573 +- cat >$tmp/stdin
1.31574 +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
1.31575 +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
1.31576 +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
1.31577 +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
1.31578 +- * ) ac_file_in=$ac_file.in ;;
1.31579 ++fi # test -n "$CONFIG_FILES"
1.31580 ++
1.31581 ++
1.31582 ++for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS
1.31583 ++do
1.31584 ++ case $ac_tag in
1.31585 ++ :[FHLC]) ac_mode=$ac_tag; continue;;
1.31586 ++ esac
1.31587 ++ case $ac_mode$ac_tag in
1.31588 ++ :[FHL]*:*);;
1.31589 ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
1.31590 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;}
1.31591 ++ { (exit 1); exit 1; }; };;
1.31592 ++ :[FH]-) ac_tag=-:-;;
1.31593 ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
1.31594 ++ esac
1.31595 ++ ac_save_IFS=$IFS
1.31596 ++ IFS=:
1.31597 ++ set x $ac_tag
1.31598 ++ IFS=$ac_save_IFS
1.31599 ++ shift
1.31600 ++ ac_file=$1
1.31601 ++ shift
1.31602 ++
1.31603 ++ case $ac_mode in
1.31604 ++ :L) ac_source=$1;;
1.31605 ++ :[FH])
1.31606 ++ ac_file_inputs=
1.31607 ++ for ac_f
1.31608 ++ do
1.31609 ++ case $ac_f in
1.31610 ++ -) ac_f="$tmp/stdin";;
1.31611 ++ *) # Look for the file first in the build tree, then in the source tree
1.31612 ++ # (if the path is not absolute). The absolute path cannot be DOS-style,
1.31613 ++ # because $ac_f cannot contain `:'.
1.31614 ++ test -f "$ac_f" ||
1.31615 ++ case $ac_f in
1.31616 ++ [\\/$]*) false;;
1.31617 ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
1.31618 ++ esac ||
1.31619 ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
1.31620 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;}
1.31621 ++ { (exit 1); exit 1; }; };;
1.31622 ++ esac
1.31623 ++ ac_file_inputs="$ac_file_inputs $ac_f"
1.31624 ++ done
1.31625 ++
1.31626 ++ # Let's still pretend it is `configure' which instantiates (i.e., don't
1.31627 ++ # use $as_me), people would be surprised to read:
1.31628 ++ # /* config.h. Generated by config.status. */
1.31629 ++ configure_input="Generated from "`IFS=:
1.31630 ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
1.31631 ++ if test x"$ac_file" != x-; then
1.31632 ++ configure_input="$ac_file. $configure_input"
1.31633 ++ { echo "$as_me:$LINENO: creating $ac_file" >&5
1.31634 ++echo "$as_me: creating $ac_file" >&6;}
1.31635 ++ fi
1.31636 ++
1.31637 ++ case $ac_tag in
1.31638 ++ *:-:* | *:-) cat >"$tmp/stdin";;
1.31639 ++ esac
1.31640 ++ ;;
1.31641 + esac
1.31642 +
1.31643 +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
1.31644 +- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
1.31645 ++ ac_dir=`$as_dirname -- "$ac_file" ||
1.31646 + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.31647 + X"$ac_file" : 'X\(//\)[^/]' \| \
1.31648 + X"$ac_file" : 'X\(//\)$' \| \
1.31649 +- X"$ac_file" : 'X\(/\)' \| \
1.31650 +- . : '\(.\)' 2>/dev/null ||
1.31651 ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
1.31652 + echo X"$ac_file" |
1.31653 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.31654 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.31655 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.31656 +- /^X\(\/\).*/{ s//\1/; q; }
1.31657 +- s/.*/./; q'`
1.31658 +- { if $as_mkdir_p; then
1.31659 +- mkdir -p "$ac_dir"
1.31660 +- else
1.31661 +- as_dir="$ac_dir"
1.31662 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.31663 ++ s//\1/
1.31664 ++ q
1.31665 ++ }
1.31666 ++ /^X\(\/\/\)[^/].*/{
1.31667 ++ s//\1/
1.31668 ++ q
1.31669 ++ }
1.31670 ++ /^X\(\/\/\)$/{
1.31671 ++ s//\1/
1.31672 ++ q
1.31673 ++ }
1.31674 ++ /^X\(\/\).*/{
1.31675 ++ s//\1/
1.31676 ++ q
1.31677 ++ }
1.31678 ++ s/.*/./; q'`
1.31679 ++ { as_dir="$ac_dir"
1.31680 ++ case $as_dir in #(
1.31681 ++ -*) as_dir=./$as_dir;;
1.31682 ++ esac
1.31683 ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
1.31684 + as_dirs=
1.31685 +- while test ! -d "$as_dir"; do
1.31686 +- as_dirs="$as_dir $as_dirs"
1.31687 +- as_dir=`(dirname "$as_dir") 2>/dev/null ||
1.31688 ++ while :; do
1.31689 ++ case $as_dir in #(
1.31690 ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
1.31691 ++ *) as_qdir=$as_dir;;
1.31692 ++ esac
1.31693 ++ as_dirs="'$as_qdir' $as_dirs"
1.31694 ++ as_dir=`$as_dirname -- "$as_dir" ||
1.31695 + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.31696 + X"$as_dir" : 'X\(//\)[^/]' \| \
1.31697 + X"$as_dir" : 'X\(//\)$' \| \
1.31698 +- X"$as_dir" : 'X\(/\)' \| \
1.31699 +- . : '\(.\)' 2>/dev/null ||
1.31700 ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
1.31701 + echo X"$as_dir" |
1.31702 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.31703 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.31704 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.31705 +- /^X\(\/\).*/{ s//\1/; q; }
1.31706 +- s/.*/./; q'`
1.31707 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.31708 ++ s//\1/
1.31709 ++ q
1.31710 ++ }
1.31711 ++ /^X\(\/\/\)[^/].*/{
1.31712 ++ s//\1/
1.31713 ++ q
1.31714 ++ }
1.31715 ++ /^X\(\/\/\)$/{
1.31716 ++ s//\1/
1.31717 ++ q
1.31718 ++ }
1.31719 ++ /^X\(\/\).*/{
1.31720 ++ s//\1/
1.31721 ++ q
1.31722 ++ }
1.31723 ++ s/.*/./; q'`
1.31724 ++ test -d "$as_dir" && break
1.31725 + done
1.31726 +- test ! -n "$as_dirs" || mkdir $as_dirs
1.31727 +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
1.31728 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
1.31729 ++ test -z "$as_dirs" || eval "mkdir $as_dirs"
1.31730 ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
1.31731 ++echo "$as_me: error: cannot create directory $as_dir" >&2;}
1.31732 + { (exit 1); exit 1; }; }; }
1.31733 +-
1.31734 + ac_builddir=.
1.31735 +
1.31736 +-if test "$ac_dir" != .; then
1.31737 ++case "$ac_dir" in
1.31738 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.31739 ++*)
1.31740 + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.31741 +- # A "../" for each directory in $ac_dir_suffix.
1.31742 +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1.31743 +-else
1.31744 +- ac_dir_suffix= ac_top_builddir=
1.31745 +-fi
1.31746 ++ # A ".." for each directory in $ac_dir_suffix.
1.31747 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.31748 ++ case $ac_top_builddir_sub in
1.31749 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.31750 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.31751 ++ esac ;;
1.31752 ++esac
1.31753 ++ac_abs_top_builddir=$ac_pwd
1.31754 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.31755 ++# for backward compatibility:
1.31756 ++ac_top_builddir=$ac_top_build_prefix
1.31757 +
1.31758 + case $srcdir in
1.31759 +- .) # No --srcdir option. We are building in place.
1.31760 ++ .) # We are building in place.
1.31761 + ac_srcdir=.
1.31762 +- if test -z "$ac_top_builddir"; then
1.31763 +- ac_top_srcdir=.
1.31764 +- else
1.31765 +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1.31766 +- fi ;;
1.31767 +- [\\/]* | ?:[\\/]* ) # Absolute path.
1.31768 ++ ac_top_srcdir=$ac_top_builddir_sub
1.31769 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.31770 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.31771 + ac_srcdir=$srcdir$ac_dir_suffix;
1.31772 +- ac_top_srcdir=$srcdir ;;
1.31773 +- *) # Relative path.
1.31774 +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1.31775 +- ac_top_srcdir=$ac_top_builddir$srcdir ;;
1.31776 +-esac
1.31777 ++ ac_top_srcdir=$srcdir
1.31778 ++ ac_abs_top_srcdir=$srcdir ;;
1.31779 ++ *) # Relative name.
1.31780 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.31781 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.31782 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.31783 ++esac
1.31784 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.31785 +
1.31786 +-# Do not use `cd foo && pwd` to compute absolute paths, because
1.31787 +-# the directories may not exist.
1.31788 +-case `pwd` in
1.31789 +-.) ac_abs_builddir="$ac_dir";;
1.31790 +-*)
1.31791 +- case "$ac_dir" in
1.31792 +- .) ac_abs_builddir=`pwd`;;
1.31793 +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
1.31794 +- *) ac_abs_builddir=`pwd`/"$ac_dir";;
1.31795 +- esac;;
1.31796 +-esac
1.31797 +-case $ac_abs_builddir in
1.31798 +-.) ac_abs_top_builddir=${ac_top_builddir}.;;
1.31799 +-*)
1.31800 +- case ${ac_top_builddir}. in
1.31801 +- .) ac_abs_top_builddir=$ac_abs_builddir;;
1.31802 +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
1.31803 +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
1.31804 +- esac;;
1.31805 +-esac
1.31806 +-case $ac_abs_builddir in
1.31807 +-.) ac_abs_srcdir=$ac_srcdir;;
1.31808 +-*)
1.31809 +- case $ac_srcdir in
1.31810 +- .) ac_abs_srcdir=$ac_abs_builddir;;
1.31811 +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
1.31812 +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
1.31813 +- esac;;
1.31814 +-esac
1.31815 +-case $ac_abs_builddir in
1.31816 +-.) ac_abs_top_srcdir=$ac_top_srcdir;;
1.31817 +-*)
1.31818 +- case $ac_top_srcdir in
1.31819 +- .) ac_abs_top_srcdir=$ac_abs_builddir;;
1.31820 +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
1.31821 +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
1.31822 +- esac;;
1.31823 +-esac
1.31824 +
1.31825 ++ case $ac_mode in
1.31826 ++ :F)
1.31827 ++ #
1.31828 ++ # CONFIG_FILE
1.31829 ++ #
1.31830 +
1.31831 + case $INSTALL in
1.31832 + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
1.31833 +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
1.31834 ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
1.31835 + esac
1.31836 ++_ACEOF
1.31837 +
1.31838 +- if test x"$ac_file" != x-; then
1.31839 +- { echo "$as_me:$LINENO: creating $ac_file" >&5
1.31840 +-echo "$as_me: creating $ac_file" >&6;}
1.31841 +- rm -f "$ac_file"
1.31842 +- fi
1.31843 +- # Let's still pretend it is `configure' which instantiates (i.e., don't
1.31844 +- # use $as_me), people would be surprised to read:
1.31845 +- # /* config.h. Generated by config.status. */
1.31846 +- if test x"$ac_file" = x-; then
1.31847 +- configure_input=
1.31848 +- else
1.31849 +- configure_input="$ac_file. "
1.31850 +- fi
1.31851 +- configure_input=$configure_input"Generated from `echo $ac_file_in |
1.31852 +- sed 's,.*/,,'` by configure."
1.31853 +-
1.31854 +- # First look for the input files in the build tree, otherwise in the
1.31855 +- # src tree.
1.31856 +- ac_file_inputs=`IFS=:
1.31857 +- for f in $ac_file_in; do
1.31858 +- case $f in
1.31859 +- -) echo $tmp/stdin ;;
1.31860 +- [\\/$]*)
1.31861 +- # Absolute (can't be DOS-style, as IFS=:)
1.31862 +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
1.31863 +-echo "$as_me: error: cannot find input file: $f" >&2;}
1.31864 +- { (exit 1); exit 1; }; }
1.31865 +- echo "$f";;
1.31866 +- *) # Relative
1.31867 +- if test -f "$f"; then
1.31868 +- # Build tree
1.31869 +- echo "$f"
1.31870 +- elif test -f "$srcdir/$f"; then
1.31871 +- # Source tree
1.31872 +- echo "$srcdir/$f"
1.31873 +- else
1.31874 +- # /dev/null tree
1.31875 +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
1.31876 +-echo "$as_me: error: cannot find input file: $f" >&2;}
1.31877 +- { (exit 1); exit 1; }; }
1.31878 +- fi;;
1.31879 +- esac
1.31880 +- done` || { (exit 1); exit 1; }
1.31881 ++cat >>$CONFIG_STATUS <<\_ACEOF
1.31882 ++# If the template does not know about datarootdir, expand it.
1.31883 ++# FIXME: This hack should be removed a few years after 2.60.
1.31884 ++ac_datarootdir_hack=; ac_datarootdir_seen=
1.31885 ++
1.31886 ++case `sed -n '/datarootdir/ {
1.31887 ++ p
1.31888 ++ q
1.31889 ++}
1.31890 ++/@datadir@/p
1.31891 ++/@docdir@/p
1.31892 ++/@infodir@/p
1.31893 ++/@localedir@/p
1.31894 ++/@mandir@/p
1.31895 ++' $ac_file_inputs` in
1.31896 ++*datarootdir*) ac_datarootdir_seen=yes;;
1.31897 ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
1.31898 ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
1.31899 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
1.31900 ++_ACEOF
1.31901 ++cat >>$CONFIG_STATUS <<_ACEOF
1.31902 ++ ac_datarootdir_hack='
1.31903 ++ s&@datadir@&$datadir&g
1.31904 ++ s&@docdir@&$docdir&g
1.31905 ++ s&@infodir@&$infodir&g
1.31906 ++ s&@localedir@&$localedir&g
1.31907 ++ s&@mandir@&$mandir&g
1.31908 ++ s&\\\${datarootdir}&$datarootdir&g' ;;
1.31909 ++esac
1.31910 + _ACEOF
1.31911 ++
1.31912 ++# Neutralize VPATH when `$srcdir' = `.'.
1.31913 ++# Shell code in configure.ac might set extrasub.
1.31914 ++# FIXME: do we really want to maintain this feature?
1.31915 + cat >>$CONFIG_STATUS <<_ACEOF
1.31916 + sed "$ac_vpsub
1.31917 + $extrasub
1.31918 +@@ -12791,142 +13936,43 @@
1.31919 + cat >>$CONFIG_STATUS <<\_ACEOF
1.31920 + :t
1.31921 + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
1.31922 +-s,@configure_input@,$configure_input,;t t
1.31923 +-s,@srcdir@,$ac_srcdir,;t t
1.31924 +-s,@abs_srcdir@,$ac_abs_srcdir,;t t
1.31925 +-s,@top_srcdir@,$ac_top_srcdir,;t t
1.31926 +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
1.31927 +-s,@builddir@,$ac_builddir,;t t
1.31928 +-s,@abs_builddir@,$ac_abs_builddir,;t t
1.31929 +-s,@top_builddir@,$ac_top_builddir,;t t
1.31930 +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
1.31931 +-s,@INSTALL@,$ac_INSTALL,;t t
1.31932 +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
1.31933 +- rm -f $tmp/stdin
1.31934 +- if test x"$ac_file" != x-; then
1.31935 +- mv $tmp/out $ac_file
1.31936 +- else
1.31937 +- cat $tmp/out
1.31938 +- rm -f $tmp/out
1.31939 +- fi
1.31940 +-
1.31941 +-done
1.31942 +-_ACEOF
1.31943 +-cat >>$CONFIG_STATUS <<\_ACEOF
1.31944 +-
1.31945 +-#
1.31946 +-# CONFIG_COMMANDS section.
1.31947 +-#
1.31948 +-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
1.31949 +- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
1.31950 +- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
1.31951 +- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
1.31952 +-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.31953 +- X"$ac_dest" : 'X\(//\)[^/]' \| \
1.31954 +- X"$ac_dest" : 'X\(//\)$' \| \
1.31955 +- X"$ac_dest" : 'X\(/\)' \| \
1.31956 +- . : '\(.\)' 2>/dev/null ||
1.31957 +-echo X"$ac_dest" |
1.31958 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.31959 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.31960 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.31961 +- /^X\(\/\).*/{ s//\1/; q; }
1.31962 +- s/.*/./; q'`
1.31963 +- { if $as_mkdir_p; then
1.31964 +- mkdir -p "$ac_dir"
1.31965 +- else
1.31966 +- as_dir="$ac_dir"
1.31967 +- as_dirs=
1.31968 +- while test ! -d "$as_dir"; do
1.31969 +- as_dirs="$as_dir $as_dirs"
1.31970 +- as_dir=`(dirname "$as_dir") 2>/dev/null ||
1.31971 +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.31972 +- X"$as_dir" : 'X\(//\)[^/]' \| \
1.31973 +- X"$as_dir" : 'X\(//\)$' \| \
1.31974 +- X"$as_dir" : 'X\(/\)' \| \
1.31975 +- . : '\(.\)' 2>/dev/null ||
1.31976 +-echo X"$as_dir" |
1.31977 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.31978 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.31979 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.31980 +- /^X\(\/\).*/{ s//\1/; q; }
1.31981 +- s/.*/./; q'`
1.31982 +- done
1.31983 +- test ! -n "$as_dirs" || mkdir $as_dirs
1.31984 +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
1.31985 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
1.31986 +- { (exit 1); exit 1; }; }; }
1.31987 ++s&@configure_input@&$configure_input&;t t
1.31988 ++s&@top_builddir@&$ac_top_builddir_sub&;t t
1.31989 ++s&@srcdir@&$ac_srcdir&;t t
1.31990 ++s&@abs_srcdir@&$ac_abs_srcdir&;t t
1.31991 ++s&@top_srcdir@&$ac_top_srcdir&;t t
1.31992 ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
1.31993 ++s&@builddir@&$ac_builddir&;t t
1.31994 ++s&@abs_builddir@&$ac_abs_builddir&;t t
1.31995 ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
1.31996 ++s&@INSTALL@&$ac_INSTALL&;t t
1.31997 ++$ac_datarootdir_hack
1.31998 ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
1.31999 ++
1.32000 ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
1.32001 ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
1.32002 ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
1.32003 ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
1.32004 ++which seems to be undefined. Please make sure it is defined." >&5
1.32005 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
1.32006 ++which seems to be undefined. Please make sure it is defined." >&2;}
1.32007 +
1.32008 +- ac_builddir=.
1.32009 +-
1.32010 +-if test "$ac_dir" != .; then
1.32011 +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.32012 +- # A "../" for each directory in $ac_dir_suffix.
1.32013 +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1.32014 +-else
1.32015 +- ac_dir_suffix= ac_top_builddir=
1.32016 +-fi
1.32017 ++ rm -f "$tmp/stdin"
1.32018 ++ case $ac_file in
1.32019 ++ -) cat "$tmp/out"; rm -f "$tmp/out";;
1.32020 ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
1.32021 ++ esac
1.32022 ++ ;;
1.32023 +
1.32024 +-case $srcdir in
1.32025 +- .) # No --srcdir option. We are building in place.
1.32026 +- ac_srcdir=.
1.32027 +- if test -z "$ac_top_builddir"; then
1.32028 +- ac_top_srcdir=.
1.32029 +- else
1.32030 +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1.32031 +- fi ;;
1.32032 +- [\\/]* | ?:[\\/]* ) # Absolute path.
1.32033 +- ac_srcdir=$srcdir$ac_dir_suffix;
1.32034 +- ac_top_srcdir=$srcdir ;;
1.32035 +- *) # Relative path.
1.32036 +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1.32037 +- ac_top_srcdir=$ac_top_builddir$srcdir ;;
1.32038 +-esac
1.32039 +
1.32040 +-# Do not use `cd foo && pwd` to compute absolute paths, because
1.32041 +-# the directories may not exist.
1.32042 +-case `pwd` in
1.32043 +-.) ac_abs_builddir="$ac_dir";;
1.32044 +-*)
1.32045 +- case "$ac_dir" in
1.32046 +- .) ac_abs_builddir=`pwd`;;
1.32047 +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
1.32048 +- *) ac_abs_builddir=`pwd`/"$ac_dir";;
1.32049 +- esac;;
1.32050 +-esac
1.32051 +-case $ac_abs_builddir in
1.32052 +-.) ac_abs_top_builddir=${ac_top_builddir}.;;
1.32053 +-*)
1.32054 +- case ${ac_top_builddir}. in
1.32055 +- .) ac_abs_top_builddir=$ac_abs_builddir;;
1.32056 +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
1.32057 +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
1.32058 +- esac;;
1.32059 +-esac
1.32060 +-case $ac_abs_builddir in
1.32061 +-.) ac_abs_srcdir=$ac_srcdir;;
1.32062 +-*)
1.32063 +- case $ac_srcdir in
1.32064 +- .) ac_abs_srcdir=$ac_abs_builddir;;
1.32065 +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
1.32066 +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
1.32067 +- esac;;
1.32068 +-esac
1.32069 +-case $ac_abs_builddir in
1.32070 +-.) ac_abs_top_srcdir=$ac_top_srcdir;;
1.32071 +-*)
1.32072 +- case $ac_top_srcdir in
1.32073 +- .) ac_abs_top_srcdir=$ac_abs_builddir;;
1.32074 +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
1.32075 +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
1.32076 +- esac;;
1.32077 +-esac
1.32078 ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
1.32079 ++echo "$as_me: executing $ac_file commands" >&6;}
1.32080 ++ ;;
1.32081 ++ esac
1.32082 +
1.32083 +
1.32084 +- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
1.32085 +-echo "$as_me: executing $ac_dest commands" >&6;}
1.32086 +- case $ac_dest in
1.32087 +- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
1.32088 ++ case $ac_file$ac_mode in
1.32089 ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
1.32090 + # Strip MF so we end up with the name of the file.
1.32091 + mf=`echo "$mf" | sed -e 's/:.*$//'`
1.32092 + # Check whether this is an Automake generated Makefile or not.
1.32093 +@@ -12936,18 +13982,29 @@
1.32094 + # each Makefile.in and add a new line on top of each file to say so.
1.32095 + # So let's grep whole file.
1.32096 + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
1.32097 +- dirpart=`(dirname "$mf") 2>/dev/null ||
1.32098 ++ dirpart=`$as_dirname -- "$mf" ||
1.32099 + $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.32100 + X"$mf" : 'X\(//\)[^/]' \| \
1.32101 + X"$mf" : 'X\(//\)$' \| \
1.32102 +- X"$mf" : 'X\(/\)' \| \
1.32103 +- . : '\(.\)' 2>/dev/null ||
1.32104 ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
1.32105 + echo X"$mf" |
1.32106 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.32107 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.32108 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.32109 +- /^X\(\/\).*/{ s//\1/; q; }
1.32110 +- s/.*/./; q'`
1.32111 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.32112 ++ s//\1/
1.32113 ++ q
1.32114 ++ }
1.32115 ++ /^X\(\/\/\)[^/].*/{
1.32116 ++ s//\1/
1.32117 ++ q
1.32118 ++ }
1.32119 ++ /^X\(\/\/\)$/{
1.32120 ++ s//\1/
1.32121 ++ q
1.32122 ++ }
1.32123 ++ /^X\(\/\).*/{
1.32124 ++ s//\1/
1.32125 ++ q
1.32126 ++ }
1.32127 ++ s/.*/./; q'`
1.32128 + else
1.32129 + continue
1.32130 + fi
1.32131 +@@ -12969,49 +14026,76 @@
1.32132 + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
1.32133 + # Make sure the directory exists.
1.32134 + test -f "$dirpart/$file" && continue
1.32135 +- fdir=`(dirname "$file") 2>/dev/null ||
1.32136 ++ fdir=`$as_dirname -- "$file" ||
1.32137 + $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.32138 + X"$file" : 'X\(//\)[^/]' \| \
1.32139 + X"$file" : 'X\(//\)$' \| \
1.32140 +- X"$file" : 'X\(/\)' \| \
1.32141 +- . : '\(.\)' 2>/dev/null ||
1.32142 ++ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
1.32143 + echo X"$file" |
1.32144 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.32145 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.32146 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.32147 +- /^X\(\/\).*/{ s//\1/; q; }
1.32148 +- s/.*/./; q'`
1.32149 +- { if $as_mkdir_p; then
1.32150 +- mkdir -p $dirpart/$fdir
1.32151 +- else
1.32152 +- as_dir=$dirpart/$fdir
1.32153 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.32154 ++ s//\1/
1.32155 ++ q
1.32156 ++ }
1.32157 ++ /^X\(\/\/\)[^/].*/{
1.32158 ++ s//\1/
1.32159 ++ q
1.32160 ++ }
1.32161 ++ /^X\(\/\/\)$/{
1.32162 ++ s//\1/
1.32163 ++ q
1.32164 ++ }
1.32165 ++ /^X\(\/\).*/{
1.32166 ++ s//\1/
1.32167 ++ q
1.32168 ++ }
1.32169 ++ s/.*/./; q'`
1.32170 ++ { as_dir=$dirpart/$fdir
1.32171 ++ case $as_dir in #(
1.32172 ++ -*) as_dir=./$as_dir;;
1.32173 ++ esac
1.32174 ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
1.32175 + as_dirs=
1.32176 +- while test ! -d "$as_dir"; do
1.32177 +- as_dirs="$as_dir $as_dirs"
1.32178 +- as_dir=`(dirname "$as_dir") 2>/dev/null ||
1.32179 ++ while :; do
1.32180 ++ case $as_dir in #(
1.32181 ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
1.32182 ++ *) as_qdir=$as_dir;;
1.32183 ++ esac
1.32184 ++ as_dirs="'$as_qdir' $as_dirs"
1.32185 ++ as_dir=`$as_dirname -- "$as_dir" ||
1.32186 + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.32187 + X"$as_dir" : 'X\(//\)[^/]' \| \
1.32188 + X"$as_dir" : 'X\(//\)$' \| \
1.32189 +- X"$as_dir" : 'X\(/\)' \| \
1.32190 +- . : '\(.\)' 2>/dev/null ||
1.32191 ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
1.32192 + echo X"$as_dir" |
1.32193 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.32194 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.32195 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.32196 +- /^X\(\/\).*/{ s//\1/; q; }
1.32197 +- s/.*/./; q'`
1.32198 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.32199 ++ s//\1/
1.32200 ++ q
1.32201 ++ }
1.32202 ++ /^X\(\/\/\)[^/].*/{
1.32203 ++ s//\1/
1.32204 ++ q
1.32205 ++ }
1.32206 ++ /^X\(\/\/\)$/{
1.32207 ++ s//\1/
1.32208 ++ q
1.32209 ++ }
1.32210 ++ /^X\(\/\).*/{
1.32211 ++ s//\1/
1.32212 ++ q
1.32213 ++ }
1.32214 ++ s/.*/./; q'`
1.32215 ++ test -d "$as_dir" && break
1.32216 + done
1.32217 +- test ! -n "$as_dirs" || mkdir $as_dirs
1.32218 +- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
1.32219 +-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
1.32220 ++ test -z "$as_dirs" || eval "mkdir $as_dirs"
1.32221 ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
1.32222 ++echo "$as_me: error: cannot create directory $as_dir" >&2;}
1.32223 + { (exit 1); exit 1; }; }; }
1.32224 +-
1.32225 + # echo "creating $dirpart/$file"
1.32226 + echo '# dummy' > "$dirpart/$file"
1.32227 + done
1.32228 + done
1.32229 + ;;
1.32230 +- libtool )
1.32231 ++ "libtool":C)
1.32232 +
1.32233 + # See if we are running on zsh, and set the options which allow our
1.32234 + # commands through without removal of \ escapes.
1.32235 +@@ -13652,11 +14736,10 @@
1.32236 + chmod +x "$ofile"
1.32237 +
1.32238 + ;;
1.32239 ++
1.32240 + esac
1.32241 +-done
1.32242 +-_ACEOF
1.32243 ++done # for ac_tag
1.32244 +
1.32245 +-cat >>$CONFIG_STATUS <<\_ACEOF
1.32246 +
1.32247 + { (exit 0); exit 0; }
1.32248 + _ACEOF
1.32249 +@@ -13686,7 +14769,7 @@
1.32250 + fi
1.32251 +
1.32252 + #
1.32253 +-# CONFIG_SUBDIRS section, as fixed in confsubdir.m4.
1.32254 ++# CONFIG_SUBDIRS section.
1.32255 + #
1.32256 + if test "$no_recursion" != yes; then
1.32257 +
1.32258 +@@ -13733,7 +14816,12 @@
1.32259 + case $ac_arg in
1.32260 + *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
1.32261 + esac
1.32262 +- ac_sub_configure_args="$ac_arg $ac_sub_configure_args"
1.32263 ++ ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
1.32264 ++
1.32265 ++ # Pass --silent
1.32266 ++ if test "$silent" = yes; then
1.32267 ++ ac_sub_configure_args="--silent $ac_sub_configure_args"
1.32268 ++ fi
1.32269 +
1.32270 + ac_popdir=`pwd`
1.32271 + for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
1.32272 +@@ -13742,97 +14830,83 @@
1.32273 + # parts of a large source tree are present.
1.32274 + test -d "$srcdir/$ac_dir" || continue
1.32275 +
1.32276 +- { echo "$as_me:$LINENO: configuring in $ac_dir" >&5
1.32277 +-echo "$as_me: configuring in $ac_dir" >&6;}
1.32278 +- { if $as_mkdir_p; then
1.32279 +- mkdir -p "$ac_dir"
1.32280 +- else
1.32281 +- as_dir="$ac_dir"
1.32282 ++ ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
1.32283 ++ echo "$as_me:$LINENO: $ac_msg" >&5
1.32284 ++ echo "$ac_msg" >&6
1.32285 ++ { as_dir="$ac_dir"
1.32286 ++ case $as_dir in #(
1.32287 ++ -*) as_dir=./$as_dir;;
1.32288 ++ esac
1.32289 ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
1.32290 + as_dirs=
1.32291 +- while test ! -d "$as_dir"; do
1.32292 +- as_dirs="$as_dir $as_dirs"
1.32293 +- as_dir=`(dirname "$as_dir") 2>/dev/null ||
1.32294 ++ while :; do
1.32295 ++ case $as_dir in #(
1.32296 ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
1.32297 ++ *) as_qdir=$as_dir;;
1.32298 ++ esac
1.32299 ++ as_dirs="'$as_qdir' $as_dirs"
1.32300 ++ as_dir=`$as_dirname -- "$as_dir" ||
1.32301 + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1.32302 + X"$as_dir" : 'X\(//\)[^/]' \| \
1.32303 + X"$as_dir" : 'X\(//\)$' \| \
1.32304 +- X"$as_dir" : 'X\(/\)' \| \
1.32305 +- . : '\(.\)' 2>/dev/null ||
1.32306 ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
1.32307 + echo X"$as_dir" |
1.32308 +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1.32309 +- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1.32310 +- /^X\(\/\/\)$/{ s//\1/; q; }
1.32311 +- /^X\(\/\).*/{ s//\1/; q; }
1.32312 +- s/.*/./; q'`
1.32313 ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
1.32314 ++ s//\1/
1.32315 ++ q
1.32316 ++ }
1.32317 ++ /^X\(\/\/\)[^/].*/{
1.32318 ++ s//\1/
1.32319 ++ q
1.32320 ++ }
1.32321 ++ /^X\(\/\/\)$/{
1.32322 ++ s//\1/
1.32323 ++ q
1.32324 ++ }
1.32325 ++ /^X\(\/\).*/{
1.32326 ++ s//\1/
1.32327 ++ q
1.32328 ++ }
1.32329 ++ s/.*/./; q'`
1.32330 ++ test -d "$as_dir" && break
1.32331 + done
1.32332 +- test ! -n "$as_dirs" || mkdir $as_dirs
1.32333 +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
1.32334 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
1.32335 ++ test -z "$as_dirs" || eval "mkdir $as_dirs"
1.32336 ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
1.32337 ++echo "$as_me: error: cannot create directory $as_dir" >&2;}
1.32338 + { (exit 1); exit 1; }; }; }
1.32339 +-
1.32340 + ac_builddir=.
1.32341 +
1.32342 +-if test "$ac_dir" != .; then
1.32343 ++case "$ac_dir" in
1.32344 ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.32345 ++*)
1.32346 + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1.32347 +- # A "../" for each directory in $ac_dir_suffix.
1.32348 +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1.32349 +-else
1.32350 +- ac_dir_suffix= ac_top_builddir=
1.32351 +-fi
1.32352 ++ # A ".." for each directory in $ac_dir_suffix.
1.32353 ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
1.32354 ++ case $ac_top_builddir_sub in
1.32355 ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
1.32356 ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
1.32357 ++ esac ;;
1.32358 ++esac
1.32359 ++ac_abs_top_builddir=$ac_pwd
1.32360 ++ac_abs_builddir=$ac_pwd$ac_dir_suffix
1.32361 ++# for backward compatibility:
1.32362 ++ac_top_builddir=$ac_top_build_prefix
1.32363 +
1.32364 + case $srcdir in
1.32365 +- .) # No --srcdir option. We are building in place.
1.32366 ++ .) # We are building in place.
1.32367 + ac_srcdir=.
1.32368 +- if test -z "$ac_top_builddir"; then
1.32369 +- ac_top_srcdir=.
1.32370 +- else
1.32371 +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1.32372 +- fi ;;
1.32373 +- [\\/]* | ?:[\\/]* ) # Absolute path.
1.32374 ++ ac_top_srcdir=$ac_top_builddir_sub
1.32375 ++ ac_abs_top_srcdir=$ac_pwd ;;
1.32376 ++ [\\/]* | ?:[\\/]* ) # Absolute name.
1.32377 + ac_srcdir=$srcdir$ac_dir_suffix;
1.32378 +- ac_top_srcdir=$srcdir ;;
1.32379 +- *) # Relative path.
1.32380 +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1.32381 +- ac_top_srcdir=$ac_top_builddir$srcdir ;;
1.32382 +-esac
1.32383 +-
1.32384 +-# Do not use `cd foo && pwd` to compute absolute paths, because
1.32385 +-# the directories may not exist.
1.32386 +-case `pwd` in
1.32387 +-.) ac_abs_builddir="$ac_dir";;
1.32388 +-*)
1.32389 +- case "$ac_dir" in
1.32390 +- .) ac_abs_builddir=`pwd`;;
1.32391 +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
1.32392 +- *) ac_abs_builddir=`pwd`/"$ac_dir";;
1.32393 +- esac;;
1.32394 +-esac
1.32395 +-case $ac_abs_builddir in
1.32396 +-.) ac_abs_top_builddir=${ac_top_builddir}.;;
1.32397 +-*)
1.32398 +- case ${ac_top_builddir}. in
1.32399 +- .) ac_abs_top_builddir=$ac_abs_builddir;;
1.32400 +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
1.32401 +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
1.32402 +- esac;;
1.32403 +-esac
1.32404 +-case $ac_abs_builddir in
1.32405 +-.) ac_abs_srcdir=$ac_srcdir;;
1.32406 +-*)
1.32407 +- case $ac_srcdir in
1.32408 +- .) ac_abs_srcdir=$ac_abs_builddir;;
1.32409 +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
1.32410 +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
1.32411 +- esac;;
1.32412 +-esac
1.32413 +-case $ac_abs_builddir in
1.32414 +-.) ac_abs_top_srcdir=$ac_top_srcdir;;
1.32415 +-*)
1.32416 +- case $ac_top_srcdir in
1.32417 +- .) ac_abs_top_srcdir=$ac_abs_builddir;;
1.32418 +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
1.32419 +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
1.32420 +- esac;;
1.32421 ++ ac_top_srcdir=$srcdir
1.32422 ++ ac_abs_top_srcdir=$srcdir ;;
1.32423 ++ *) # Relative name.
1.32424 ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
1.32425 ++ ac_top_srcdir=$ac_top_build_prefix$srcdir
1.32426 ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
1.32427 + esac
1.32428 ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
1.32429 +
1.32430 +
1.32431 + cd "$ac_dir"
1.32432 +@@ -13856,8 +14930,8 @@
1.32433 + # Make the cache file name correct relative to the subdirectory.
1.32434 + case $cache_file in
1.32435 + [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
1.32436 +- *) # Relative path.
1.32437 +- ac_sub_cache_file=$ac_top_builddir$cache_file ;;
1.32438 ++ *) # Relative name.
1.32439 ++ ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
1.32440 + esac
1.32441 +
1.32442 + { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
1.32443 +diff -Naur newlib-1.17.0/newlib/libc/sys/configure.in newlib-1.17.0-new/newlib/libc/sys/configure.in
1.32444 +--- newlib-1.17.0/newlib/libc/sys/configure.in 2007-05-24 19:33:37.000000000 +0200
1.32445 ++++ newlib-1.17.0-new/newlib/libc/sys/configure.in 2009-05-22 09:57:50.000000000 +0200
1.32446 +@@ -24,6 +24,7 @@
1.32447 + a29khif) AC_CONFIG_SUBDIRS(a29khif) ;;
1.32448 + arc) AC_CONFIG_SUBDIRS(arc) ;;
1.32449 + arm) AC_CONFIG_SUBDIRS(arm) ;;
1.32450 ++ avr32) AC_CONFIG_SUBDIRS(avr32) ;;
1.32451 + d10v) AC_CONFIG_SUBDIRS(d10v) ;;
1.32452 + decstation) AC_CONFIG_SUBDIRS(decstation) ;;
1.32453 + h8300hms) AC_CONFIG_SUBDIRS(h8300hms) ;;