Bump version to 0.3.2+svn.
2 # Copyright 2007 Yann E. MORIN
3 # Licensed under the GPL v2. See COPYING in the root of this package.
5 # This is the main entry point to crosstool
7 # - download, extract and patch the toolchain components
8 # - build and install each components in turn
9 # - and eventually test the resulting toolchain
11 # What this file does is prepare the environment, based upon the user-choosen
12 # options. It also checks the existing environment for un-friendly variables,
13 # and builds the tools.
15 # Parse the common functions
16 . "${CT_LIB_DIR}/scripts/functions"
18 CT_STAR_DATE=`CT_DoDate +%s%N`
19 CT_STAR_DATE_HUMAN=`CT_DoDate +%Y%m%d.%H%M%S`
21 # Are we configured? We'll need that later...
22 CT_TestOrAbort "Configuration file not found. Please create one." -f "${CT_TOP_DIR}/.config"
24 # Parse the configuration file
25 # It has some info about the logging facility, so include it early
26 . "${CT_TOP_DIR}/.config"
28 # Yes! We can do full logging from now on!
29 CT_DoLog INFO "Build started ${CT_STAR_DATE_HUMAN}"
32 renice ${CT_NICE} $$ |CT_DoLog DEBUG
34 CT_DoStep DEBUG "Dumping crosstool-NG configuration"
35 cat "${CT_TOP_DIR}/.config" |egrep '^(# |)CT_' |CT_DoLog DEBUG
38 # Some sanity checks in the environment and needed tools
39 CT_DoLog INFO "Checking environment sanity"
41 CT_DoLog DEBUG "Unsetting and unexporting MAKEFLAGS"
45 # Enable known ordering of files in directory listings:
46 CT_Test "crosstool-NG might not work as expected with LANG=\"${LANG}\"" -n "${LANG}"
47 case "${LC_COLLATE},${LC_ALL}" in
48 # These four combinations are known to sort files in the correct order:
53 # Anything else is destined to be borked if not gracefuly handled:
54 *) CT_DoLog WARN "Either LC_COLLATE=\"${LC_COLLATE}\" or LC_ALL=\"${LC_ALL}\" is not supported."
55 export LC_ALL=`locale -a |egrep "^(fr_FR|en_US)" |head -n 1`
56 CT_TestOrAbort "Neither en_US* nor fr_FR* locales found on your system." -n "${LC_ALL}"
57 CT_DoLog WARN "Forcing to known working LC_ALL=\"${LC_ALL}\"."
61 # Other environment sanity checks
62 CT_TestAndAbort "Don't set LD_LIBRARY_PATH. It screws up the build." -n "${LD_LIBRARY_PATH}"
63 CT_TestAndAbort "Don't set CFLAGS. It screws up the build." -n "${CFLAGS}"
64 CT_TestAndAbort "Don't set CXXFLAGS. It screws up the build." -n "${CXXFLAGS}"
65 CT_Test "GREP_OPTIONS screws up the build. Resetting." -n "${GREP_OPTIONS}"
73 CT_DoLog INFO "Building environment variables"
75 # Parse architecture-specific functions
76 . "${CT_LIB_DIR}/arch/${CT_ARCH}/functions"
78 # Target tuple: CT_TARGET needs a little love:
81 # Kludge: If any of the configured options needs CT_TARGET,
82 # then rescan the options file now:
83 . "${CT_TOP_DIR}/.config"
85 # Second kludge: merge user-supplied target CFLAGS with architecture-provided
87 CT_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_TARGET_CFLAGS}"
89 # Now, build up the variables from the user-configured options.
90 CT_KERNEL_FILE="${CT_KERNEL}-${CT_KERNEL_VERSION}"
91 CT_BINUTILS_FILE="binutils-${CT_BINUTILS_VERSION}"
92 CT_CC_FILE="${CT_CC}-${CT_CC_VERSION}"
93 CT_LIBC_FILE="${CT_LIBC}-${CT_LIBC_VERSION}"
96 CT_TARBALLS_DIR="${CT_TOP_DIR}/targets/tarballs"
97 CT_SRC_DIR="${CT_TOP_DIR}/targets/src"
98 CT_BUILD_DIR="${CT_TOP_DIR}/targets/${CT_TARGET}/build"
99 CT_DEBUG_INSTALL_DIR="${CT_INSTALL_DIR}/${CT_TARGET}/debug-root"
100 # Note: we'll always install the core compiler in its own directory, so as to
101 # not mix the two builds: core and final.
102 CT_CC_CORE_STATIC_PREFIX_DIR="${CT_BUILD_DIR}/${CT_CC}-core-static"
103 CT_CC_CORE_SHARED_PREFIX_DIR="${CT_BUILD_DIR}/${CT_CC}-core-shared"
104 CT_STATE_DIR="${CT_TOP_DIR}/targets/${CT_TARGET}/state"
106 # We must ensure that we can restart if asked for!
107 if [ -n "${CT_RESTART}" -a ! -d "${CT_STATE_DIR}" ]; then
108 CT_DoLog ERROR "You asked to restart a non-restartable build"
109 CT_DoLog ERROR "This happened because you didn't set CT_DEBUG_CT_SAVE_STEPS"
110 CT_DoLog ERROR "in the config options for the previous build, or the state"
111 CT_DoLog ERROR "directoy for the previous build was deleted."
112 CT_Abort "I will stop here to avoid any carnage"
115 # Make all path absolute, it so much easier!
116 CT_LOCAL_TARBALLS_DIR="`CT_MakeAbsolutePath \"${CT_LOCAL_TARBALLS_DIR}\"`"
118 # Some more sanity checks now that we have all paths set up
119 case "${CT_TARBALLS_DIR},${CT_SRC_DIR},${CT_BUILD_DIR},${CT_PREFIX_DIR},${CT_INSTALL_DIR}" in
120 *" "*) CT_Abort "Don't use spaces in paths, it breaks things.";;
123 # Check now if we can write to the destination directory:
124 if [ -d "${CT_INSTALL_DIR}" ]; then
125 CT_TestAndAbort "Destination directory \"${CT_INSTALL_DIR}\" is not removable" ! -w `dirname "${CT_INSTALL_DIR}"`
128 # Good, now grab a bit of informations on the system we're being run on,
129 # just in case something goes awok, and it's not our fault:
130 CT_SYS_USER="`id -un`"
131 CT_SYS_HOSTNAME=`hostname -f 2>/dev/null || true`
132 # Hmmm. Some non-DHCP-enabled machines do not have an FQDN... Fall back to node name.
133 CT_SYS_HOSTNAME="${CT_SYS_HOSTNAME:-`uname -n`}"
134 CT_SYS_KERNEL=`uname -s`
135 CT_SYS_REVISION=`uname -r`
136 # MacOS X lacks '-o' :
137 CT_SYS_OS=`uname -o || echo "Unknown (maybe MacOS-X)"`
138 CT_SYS_MACHINE=`uname -m`
139 CT_SYS_PROCESSOR=`uname -p`
140 CT_SYS_GCC=`gcc -dumpversion`
141 CT_SYS_TARGET=`CT_DoConfigGuess`
142 CT_TOOLCHAIN_ID="crosstool-${CT_VERSION} build ${CT_STAR_DATE_HUMAN} by ${CT_SYS_USER}@${CT_SYS_HOSTNAME}"
144 CT_DoLog EXTRA "Preparing working directories"
146 # Ah! The build directory shall be eradicated, even if we restart!
147 if [ -d "${CT_BUILD_DIR}" ]; then
148 mv "${CT_BUILD_DIR}" "${CT_BUILD_DIR}.$$"
149 chmod -R u+w "${CT_BUILD_DIR}.$$"
150 setsid nohup rm -rf "${CT_BUILD_DIR}.$$" >/dev/null 2>&1 &
153 # Don't eradicate directories if we need to restart
154 if [ -z "${CT_RESTART}" ]; then
155 # Get rid of pre-existing installed toolchain and previous build directories.
156 # We need to do that _before_ we can safely log, because the log file will
157 # most probably be in the toolchain directory.
158 if [ "${CT_FORCE_DOWNLOAD}" = "y" -a -d "${CT_TARBALLS_DIR}" ]; then
159 mv "${CT_TARBALLS_DIR}" "${CT_TARBALLS_DIR}.$$"
160 chmod -R u+w "${CT_TARBALLS_DIR}.$$"
161 setsid nohup rm -rf "${CT_TARBALLS_DIR}.$$" >/dev/null 2>&1 &
163 if [ "${CT_FORCE_EXTRACT}" = "y" -a -d "${CT_SRC_DIR}" ]; then
164 mv "${CT_SRC_DIR}" "${CT_SRC_DIR}.$$"
165 chmod -R u+w "${CT_SRC_DIR}.$$"
166 setsid nohup rm -rf "${CT_SRC_DIR}.$$" >/dev/null 2>&1 &
168 if [ -d "${CT_INSTALL_DIR}" ]; then
169 mv "${CT_INSTALL_DIR}" "${CT_INSTALL_DIR}.$$"
170 chmod -R u+w "${CT_INSTALL_DIR}.$$"
171 setsid nohup rm -rf "${CT_INSTALL_DIR}.$$" >/dev/null 2>&1 &
173 if [ -d "${CT_DEBUG_INSTALL_DIR}" ]; then
174 mv "${CT_DEBUG_INSTALL_DIR}" "${CT_DEBUG_INSTALL_DIR}.$$"
175 chmod -R u+w "${CT_DEBUG_INSTALL_DIR}.$$"
176 setsid nohup rm -rf "${CT_DEBUG_INSTALL_DIR}.$$" >/dev/null 2>&1 &
178 # In case we start anew, get rid of the previously saved state directory
179 if [ -d "${CT_STATE_DIR}" ]; then
180 mv "${CT_STATE_DIR}" "${CT_STATE_DIR}.$$"
181 chmod -R u+w "${CT_STATE_DIR}.$$"
182 setsid nohup rm -rf "${CT_STATE_DIR}.$$" >/dev/null 2>&1 &
186 # Create the directories we'll use, even if restarting: it does no harm to
187 # create already existent directories, and CT_BUILD_DIR needs to be created
189 mkdir -p "${CT_TARBALLS_DIR}"
190 mkdir -p "${CT_SRC_DIR}"
191 mkdir -p "${CT_BUILD_DIR}"
192 mkdir -p "${CT_INSTALL_DIR}"
193 mkdir -p "${CT_PREFIX_DIR}"
194 mkdir -p "${CT_DEBUG_INSTALL_DIR}"
195 mkdir -p "${CT_CC_CORE_STATIC_PREFIX_DIR}"
196 mkdir -p "${CT_CC_CORE_SHARED_PREFIX_DIR}"
197 mkdir -p "${CT_STATE_DIR}"
199 # Kludge: CT_INSTALL_DIR and CT_PREFIX_DIR might have grown read-only if
200 # the previous build was successfull. To be able to move the logfile there,
201 # switch them back to read/write
202 chmod -R u+w "${CT_INSTALL_DIR}" "${CT_PREFIX_DIR}"
204 # Redirect log to the actual log file now we can
205 # It's quite understandable that the log file will be installed in the install
206 # directory, so we must first ensure it exists and is writeable (above) before
209 case "${CT_LOG_TO_FILE}" in
210 y) CT_LOG_FILE="${CT_PREFIX_DIR}/build.log"
211 cat "${tmp_log_file}" >>"${CT_LOG_FILE}"
212 rm -f "${tmp_log_file}"
213 exec >>"${CT_LOG_FILE}"
215 *) rm -f "${tmp_log_file}"
219 # Setting up the rest of the environment only if not restarting
220 if [ -z "${CT_RESTART}" ]; then
221 # Determine build system if not set by the user
222 CT_Test "You did not specify the build system. That's OK, I can guess..." -z "${CT_BUILD}"
223 CT_BUILD="${CT_BUILD:-`CT_DoConfigGuess`}"
224 CT_BUILD=`CT_DoConfigSub "${CT_BUILD}"`
226 # Arrange paths depending on wether we use sys-root or not.
227 if [ "${CT_USE_SYSROOT}" = "y" ]; then
228 CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}/sys-root"
229 CT_HEADERS_DIR="${CT_SYSROOT_DIR}/usr/include"
230 BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
231 CC_CORE_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
232 CC_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
234 # glibc's prefix must be exactly /usr, else --with-sysroot'd gcc will get
235 # confused when $sysroot/usr/include is not present.
236 # Note: --prefix=/usr is magic!
237 # See http://www.gnu.org/software/libc/FAQ.html#s-2.2
239 # plain old way. All libraries in prefix/target/lib
240 CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}"
241 CT_HEADERS_DIR="${CT_SYSROOT_DIR}/include"
242 # hack! Always use --with-sysroot for binutils.
243 # binutils 2.14 and later obey it, older binutils ignore it.
244 # Lets you build a working 32->64 bit cross gcc
245 BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
246 # Use --with-headers, else final gcc will define disable_glibc while
247 # building libgcc, and you'll have no profiling
248 CC_CORE_SYSROOT_ARG="--without-headers"
249 CC_SYSROOT_ARG="--with-headers=${CT_HEADERS_DIR}"
250 LIBC_SYSROOT_ARG="prefix="
253 # Prepare the 'lib' directories in sysroot, else the ../lib64 hack used by
254 # 32 -> 64 bit crosscompilers won't work, and build of final gcc will fail with
255 # "ld: cannot open crti.o: No such file or directory"
256 mkdir -p "${CT_SYSROOT_DIR}/lib"
257 mkdir -p "${CT_SYSROOT_DIR}/usr/lib"
259 # Canadian-cross are really picky on the way they are built. Tweak the values.
260 CT_UNIQ_BUILD=`echo "${CT_BUILD}" |sed -r -e 's/-/-build_/'`
261 if [ "${CT_CANADIAN}" = "y" ]; then
262 # Arrange so that gcc never, ever think that build system == host system
263 CT_CANADIAN_OPT="--build=${CT_UNIQ_BUILD}"
264 # We shall have a compiler for this target!
267 CT_HOST="${CT_BUILD}"
268 CT_CANADIAN_OPT="--build=${CT_BUILD}"
269 # Add the target toolchain in the path so that we can build the C library
270 # Carefully add paths in the order we want them:
271 # - first try in ${CT_PREFIX_DIR}/bin
272 # - then try in ${CT_CC_CORE_SHARED_PREFIX_DIR}/bin
273 # - then try in ${CT_CC_CORE_STATIC_PREFIX_DIR}/bin
274 # - fall back to searching user's PATH
275 export PATH="${CT_PREFIX_DIR}/bin:${CT_CC_CORE_SHARED_PREFIX_DIR}/bin:${CT_CC_CORE_STATIC_PREFIX_DIR}/bin:${PATH}"
278 # Modify GCC_HOST to never be equal to $BUILD or $TARGET
279 # This strange operation causes gcc to always generate a cross-compiler
280 # even if the build machine is the same kind as the host.
281 # This is why CC has to be set when doing a canadian cross; you can't find a
282 # host compiler by appending -gcc to our whacky $GCC_HOST
283 # Kludge: it is reported that the above causes canadian crosses with cygwin
284 # hosts to fail, so avoid it just in that one case. It would be cleaner to
285 # just move this into the non-canadian case above, but I'm afraid that might
286 # cause some configure script somewhere to decide that since build==host, they
287 # could run host binaries.
288 # (Copied almost as-is from original crosstool):
289 case "${CT_KERNEL},${CT_CANADIAN}" in
291 *,y) CT_HOST="`echo \"${CT_HOST}\" |sed -r -e 's/-/-host_/;'`";;
294 # Ah! Recent versions of binutils need some of the build and/or host system
295 # (read CT_BUILD and CT_HOST) tools to be accessible (ar is but an example).
297 CT_DoLog DEBUG "Making build system tools available"
298 mkdir -p "${CT_PREFIX_DIR}/bin"
299 for tool in ar as dlltool gcc g++ gnatbind gnatmake ld nm ranlib strip windres objcopy objdump; do
300 tmp=`CT_Which ${tool}`
301 if [ -n "${tmp}" ]; then
302 ln -sfv "${tmp}" "${CT_PREFIX_DIR}/bin/${CT_BUILD}-${tool}"
303 ln -sfv "${tmp}" "${CT_PREFIX_DIR}/bin/${CT_UNIQ_BUILD}-${tool}"
304 ln -sfv "${tmp}" "${CT_PREFIX_DIR}/bin/${CT_HOST}-${tool}"
310 [ "${CT_USE_PIPES}" = "y" ] && CT_CFLAGS_FOR_HOST="${CT_CFLAGS_FOR_HOST} -pipe"
312 # Override the configured jobs with what's been given on the command line
313 [ -n "${CT_JOBS}" ] && CT_PARALLEL_JOBS="${CT_JOBS}"
315 # And help make go faster
317 [ ${CT_PARALLEL_JOBS} -ne 0 ] && PARALLELMFLAGS="${PARALLELMFLAGS} -j${CT_PARALLEL_JOBS}"
318 [ ${CT_LOAD} -ne 0 ] && PARALLELMFLAGS="${PARALLELMFLAGS} -l${CT_LOAD}"
320 CT_DoStep EXTRA "Dumping internal crosstool-NG configuration"
321 CT_DoLog EXTRA "Building a toolchain for:"
322 CT_DoLog EXTRA " build = ${CT_BUILD}"
323 CT_DoLog EXTRA " host = ${CT_HOST}"
324 CT_DoLog EXTRA " target = ${CT_TARGET}"
325 set |egrep '^CT_.+=' |sort |CT_DoLog DEBUG
329 # Include sub-scripts instead of calling them: that way, we do not have to
330 # export any variable, nor re-parse the configuration and functions files.
331 . "${CT_LIB_DIR}/scripts/build/kernel_${CT_KERNEL}.sh"
332 . "${CT_LIB_DIR}/scripts/build/binutils.sh"
333 . "${CT_LIB_DIR}/scripts/build/libc_${CT_LIBC}.sh"
334 . "${CT_LIB_DIR}/scripts/build/cc_${CT_CC}.sh"
335 . "${CT_LIB_DIR}/scripts/build/debug.sh"
336 . "${CT_LIB_DIR}/scripts/build/tools.sh"
338 if [ -z "${CT_RESTART}" ]; then
339 CT_DoStep INFO "Retrieving needed toolchain components' tarballs"
348 if [ "${CT_ONLY_DOWNLOAD}" != "y" ]; then
349 if [ "${CT_FORCE_EXTRACT}" = "y" ]; then
350 mv "${CT_SRC_DIR}" "${CT_SRC_DIR}.$$"
351 setsid nohup rm -rf "${CT_SRC_DIR}.$$" >/dev/null 2>&1
353 CT_DoStep INFO "Extracting and patching toolchain components"
364 # Now for the job by itself. Go have a coffee!
365 if [ "${CT_ONLY_DOWNLOAD}" != "y" -a "${CT_ONLY_EXTRACT}" != "y" ]; then
366 # Because of CT_RESTART, this becomes quite complex
369 [ -n "${CT_RESTART}" ] && do_it=0 || do_it=1
370 for step in libc_check_config \
371 kernel_check_config \
384 if [ ${do_it} -eq 0 ]; then
385 if [ "${CT_RESTART}" = "${step}" ]; then
386 CT_DoLoadState "${step}"
391 CT_DoSaveState ${step}
392 if [ ${do_stop} -eq 1 ]; then
393 CT_DoLog ERROR "Stopping just after step \"${prev_step}\", as requested."
397 if [ ${do_it} -eq 1 ]; then
399 if [ "${CT_STOP}" = "${step}" ]; then
402 if [ "${CTDEBUG_CT_PAUSE_STEPS}" = "y" ]; then
403 CT_DoPause "Step \"${step}\" finished"
409 CT_DoLog DEBUG "Removing access to the build system tools"
410 find "${CT_PREFIX_DIR}/bin" -name "${CT_BUILD}-"'*' -exec rm -fv {} \+ |CT_DoLog DEBUG
411 find "${CT_PREFIX_DIR}/bin" -name "${CT_UNIQ_BUILD}-"'*' -exec rm -fv {} \+ |CT_DoLog DEBUG
412 find "${CT_PREFIX_DIR}/bin" -name "${CT_HOST}-"'*' -exec rm -fv {} \+ |CT_DoLog DEBUG
414 # Install the /populator/
415 CT_DoLog EXTRA "Installing the populate helper"
416 sed -r -e 's,@@CT_READELF@@,'"${CT_PREFIX_DIR}/bin/${CT_TARGET}-readelf"',g;' \
417 -e 's,@@CT_SYSROOT_DIR@@,'"${CT_SYSROOT_DIR}"',g;' \
418 "${CT_LIB_DIR}/tools/populate.in" >"${CT_PREFIX_DIR}/bin/${CT_TARGET}-populate"
419 chmod 755 "${CT_PREFIX_DIR}/bin/${CT_TARGET}-populate"
421 # Create the aliases to the target tools
422 CT_DoStep EXTRA "Creating toolchain aliases"
423 CT_Pushd "${CT_PREFIX_DIR}/bin"
424 for t in "${CT_TARGET}-"*; do
425 if [ -n "${CT_TARGET_ALIAS}" ]; then
426 _t="`echo \"$t\" |sed -r -e 's/^'\"${CT_TARGET}\"'-/'\"${CT_TARGET_ALIAS}\"'-/;'`"
427 CT_DoLog DEBUG "Linking \"${_t}\" -> \"${t}\""
428 ln -sv "${t}" "${_t}" 2>&1 |CT_DoLog ALL
430 if [ -n "${CT_TARGET_ALIAS_SED_EXPR}" ]; then
431 _t="`echo \"$t\" |sed -r -e \"${CT_TARGET_ALIAS_SED_EXPR}\"`"
432 CT_DoLog DEBUG "Linking \"${_t}\" -> \"${t}\""
433 ln -sv "${t}" "${_t}" 2>&1 |CT_DoLog ALL
439 # Remove the generated documentation files
440 if [ "${CT_REMOVE_DOCS}" = "y" ]; then
441 CT_DoLog INFO "Removing installed documentation"
442 rm -rf "${CT_PREFIX_DIR}/"{,usr/}{man,info}
443 rm -rf "${CT_SYSROOT_DIR}/"{,usr/}{man,info}
444 rm -rf "${CT_DEBUG_INSTALL_DIR}/"{,usr/}{man,info}
450 if [ "${CT_LOG_FILE_COMPRESS}" = y ]; then
451 CT_DoLog EXTRA "Compressing log file"
453 bzip2 -9 "${CT_LOG_FILE}"
456 if [ "${CT_INSTALL_DIR_RO}" = "y" ]; then
457 # OK, now we're done, set the toolchain read-only
458 # Don't log, the log file may become read-only any moment...
459 chmod -R a-w "${CT_INSTALL_DIR}" >/dev/null 2>&1