Use the paths found by ./configure in the ct-ng.in makefile script and its fragments.
/trunk/kconfig/kconfig.mk | 2 1 1 0 +-
/trunk/samples/samples.mk | 18 9 9 0 +++++++++---------
/trunk/config/config.mk | 10 5 5 0 +++++-----
/trunk/ct-ng.in | 22 13 9 0 +++++++++++++---------
4 files changed, 28 insertions(+), 24 deletions(-)
1 # This file contains some usefull common functions
2 # Copyright 2007 Yann E. MORIN
3 # Licensed under the GPL v2. See COPYING in the root of this package
5 # Prepare the fault handler
8 # Bail out early in subshell, the upper level shell will act accordingly.
9 [ ${BASH_SUBSHELL} -eq 0 ] || exit $ret
10 CT_DoLog ERROR "Build failed in step '${CT_STEP_MESSAGE[${CT_STEP_COUNT}]}'"
11 for((step=(CT_STEP_COUNT-1); step>1; step--)); do
12 CT_DoLog ERROR " called in step '${CT_STEP_MESSAGE[${step}]}'"
14 CT_DoLog ERROR "Error happened in '${BASH_SOURCE[1]}' in function '${FUNCNAME[1]}' (line unknown, sorry)"
15 for((depth=2; ${BASH_LINENO[$((${depth}-1))]}>0; depth++)); do
16 CT_DoLog ERROR " called from '${BASH_SOURCE[${depth}]}' at line # ${BASH_LINENO[${depth}-1]} in function '${FUNCNAME[${depth}]}'"
18 [ "${CT_LOG_TO_FILE}" = "y" ] && CT_DoLog ERROR "Look at '${CT_LOG_FILE}' for more info on this error."
24 # Install the fault handler
27 # Inherit the fault handler in subshells and functions
30 # Make pipes fail on the _first_ failed command
31 # Not supported on bash < 3.x, but we need it, so drop the obsoleting bash-2.x
34 # Don't hash commands' locations, and search every time it is requested.
35 # This is slow, but needed because of the static/shared core gcc which shall
36 # always match to shared if it exists, and only fallback to static if the
41 # - first of all, save stdout so we can see the live logs: fd #6
43 # - then point stdout to the log file (temporary for now)
44 tmp_log_file="${CT_TOP_DIR}/log.$$"
45 exec >>"${tmp_log_file}"
47 # The different log levels:
55 # Make it easy to use \n and !
59 # A function to log what is happening
60 # Different log level are available:
61 # - ERROR: A serious, fatal error occurred
62 # - WARN: A non fatal, non serious error occurred, take your responsbility with the generated build
63 # - INFO: Informational messages
64 # - EXTRA: Extra informational messages
65 # - DEBUG: Debug messages
66 # - ALL: Component's build messages
67 # Usage: CT_DoLog <level> [message]
68 # If message is empty, then stdin will be logged.
70 local max_level LEVEL level cur_l cur_L
72 eval max_level="\${CT_LOG_LEVEL_${CT_LOG_LEVEL_MAX}}"
73 # Set the maximum log level to DEBUG if we have none
74 [ -z "${max_level}" ] && max_level=${CT_LOG_LEVEL_DEBUG}
77 eval level="\${CT_LOG_LEVEL_${LEVEL}}"
83 fi |( IFS="${CR}" # We want the full lines, even leading spaces
89 indent=$((2*CT_STEP_COUNT))
91 case "${CT_LOG_SEE_TOOLS_WARN},${line}" in
92 y,*"warning:"*) cur_L=WARN; cur_l=${CT_LOG_LEVEL_WARN};;
93 y,*"WARNING:"*) cur_L=WARN; cur_l=${CT_LOG_LEVEL_WARN};;
94 *"error:"*) cur_L=ERROR; cur_l=${CT_LOG_LEVEL_ERROR};;
95 *"make["*"]: *** ["*) cur_L=ERROR; cur_l=${CT_LOG_LEVEL_ERROR};;
96 *) cur_L="${LEVEL}"; cur_l="${level}";;
98 # There will always be a log file (stdout, fd #1), be it /dev/null
99 printf "[%-5s]%*s%s%s\n" "${cur_L}" "${indent}" " " "${line}"
100 if [ ${cur_l} -le ${max_level} ]; then
101 # Only print to console (fd #6) if log level is high enough.
102 printf "\r[%-5s]%*s%s%s\n" "${cur_L}" "${indent}" " " "${line}" >&6
104 if [ "${CT_LOG_PROGRESS_BAR}" = "y" ]; then
105 printf "\r[%02d:%02d] %s " $((SECONDS/60)) $((SECONDS%60)) "${_prog_bar[$((_prog_bar_cpt/10))]}" >&6
106 _prog_bar_cpt=$(((_prog_bar_cpt+1)%40))
114 # Execute an action, and log its messages
115 # Usage: CT_DoExecLog <level> <[VAR=val...] command [parameters...]>
119 CT_DoLog DEBUG "==> Executing: '${@}'"
120 "${@}" 2>&1 |CT_DoLog "${level}"
123 # Tail message to be logged whatever happens
124 # Usage: CT_DoEnd <level>
128 CT_STOP_DATE=$(CT_DoDate +%s%N)
129 CT_STOP_DATE_HUMAN=$(CT_DoDate +%Y%m%d.%H%M%S)
130 if [ "${level}" != "ERROR" ]; then
131 CT_DoLog "${level:-INFO}" "Build completed at ${CT_STOP_DATE_HUMAN}"
133 elapsed=$((CT_STOP_DATE-CT_STAR_DATE))
134 elapsed_min=$((elapsed/(60*1000*1000*1000)))
135 elapsed_sec=$(printf "%02d" $(((elapsed%(60*1000*1000*1000))/(1000*1000*1000))))
136 elapsed_csec=$(printf "%02d" $(((elapsed%(1000*1000*1000))/(10*1000*1000))))
137 CT_DoLog ${level:-INFO} "(elapsed: ${elapsed_min}:${elapsed_sec}.${elapsed_csec})"
140 # Abort the execution with an error message
141 # Usage: CT_Abort <message>
147 # Test a condition, and print a message if satisfied
148 # Usage: CT_Test <message> <tests>
153 test "$@" && CT_DoLog WARN "$m"
157 # Test a condition, and abort with an error message if satisfied
158 # Usage: CT_TestAndAbort <message> <tests>
162 test "$@" && CT_Abort "$m"
166 # Test a condition, and abort with an error message if not satisfied
167 # Usage: CT_TestAndAbort <message> <tests>
171 test "$@" || CT_Abort "$m"
175 # Test the presence of a tool, or abort if not found
176 # Usage: CT_HasOrAbort <tool>
178 CT_TestAndAbort "'${1}' not found and needed for successful toolchain build." -z "$(CT_Which "${1}")"
182 # Search a program: wrap "which" for those system where
183 # "which" verbosely says there is no match (Mdk are such
185 # Usage: CT_Which <filename>
187 which "$1" 2>/dev/null || true
190 # Get current date with nanosecond precision
191 # On those system not supporting nanosecond precision, faked with rounding down
192 # to the highest entire second
193 # Usage: CT_DoDate <fmt>
195 date "$1" |sed -r -e 's/%N$/000000000/;'
199 CT_STEP_MESSAGE[${CT_STEP_COUNT}]="<none>"
200 # Memorise a step being done so that any error is caught
201 # Usage: CT_DoStep <loglevel> <message>
203 local start=$(CT_DoDate +%s%N)
204 CT_DoLog "$1" "================================================================="
206 CT_STEP_COUNT=$((CT_STEP_COUNT+1))
207 CT_STEP_LEVEL[${CT_STEP_COUNT}]="$1"; shift
208 CT_STEP_START[${CT_STEP_COUNT}]="${start}"
209 CT_STEP_MESSAGE[${CT_STEP_COUNT}]="$1"
213 # End the step just being done
216 local stop=$(CT_DoDate +%s%N)
217 local duration=$(printf "%032d" $((stop-${CT_STEP_START[${CT_STEP_COUNT}]})) |sed -r -e 's/([[:digit:]]{2})[[:digit:]]{7}$/\.\1/; s/^0+//; s/^\./0\./;')
218 local elapsed=$(printf "%02d:%02d" $((SECONDS/60)) $((SECONDS%60)))
219 local level="${CT_STEP_LEVEL[${CT_STEP_COUNT}]}"
220 local message="${CT_STEP_MESSAGE[${CT_STEP_COUNT}]}"
221 CT_STEP_COUNT=$((CT_STEP_COUNT-1))
222 CT_DoLog "${level}" "${message}: done in ${duration}s (at ${elapsed})"
226 # Pushes into a directory, and pops back
228 pushd "$1" >/dev/null 2>&1
234 # Creates a temporary directory
235 # $1: variable to assign to
236 # Usage: CT_MktempDir foo
238 # Some mktemp do not allow more than 6 Xs
239 eval "$1"=$(mktemp -q -d "${CT_BUILD_DIR}/tmp.XXXXXX")
240 CT_TestOrAbort "Could not make temporary directory" -n "${!1}" -a -d "${!1}"
241 CT_DoLog DEBUG "Made temporary directory '${!1}'"
245 # Removes one or more directories, even if it is read-only, or its parent is
246 # Usage: CT_DoForceRmdir dir [...]
250 for dir in "${@}"; do
251 [ -d "${dir}" ] || continue
252 mode="$(stat -c '%a' "${dir}")"
253 CT_DoExecLog ALL chmod -R u+w "$(dirname "${dir}")"
254 CT_DoExecLog ALL rm -rf "${dir}"
255 CT_DoExecLog ALL chmod -R ${mode} "$(dirname "${dir}")"
259 # Echoes the specified string on stdout until the pipe breaks.
262 # Usage: CT_DoYes "" |make oldconfig
267 # Get the file name extension of a component
268 # Usage: CT_GetFileExtension <component_name-component_version> [extension]
269 # If found, echoes the extension to stdout
270 # If not found, echoes nothing on stdout.
271 CT_GetFileExtension() {
277 # we need to also check for an empty extension for those very
278 # peculiar components that don't have one (such as sstrip from
280 for ext in ${first_ext} .tar.gz .tar.bz2 .tgz .tar ''; do
281 if [ -f "${CT_TARBALLS_DIR}/${file}${ext}" ]; then
290 # Set environment for proxy access
291 # Usage: CT_DoSetProxy <proxy_type>
292 # where proxy_type is one of 'http', 'sockssys', 'socks4' or 'socks5',
293 # or empty (to not change proxy settings).
298 case "${CT_PROXY_USER}:${CT_PROXY_PASS}" in
300 :*) http_proxy="${http_proxy}:${CT_PROXY_PASS}@";;
301 *:) http_proxy="${http_proxy}${CT_PROXY_USER}@";;
302 *:*) http_proxy="${http_proxy}${CT_PROXY_USER}:${CT_PROXY_PASS}@";;
304 export http_proxy="${http_proxy}${CT_PROXY_HOST}:${CT_PROXY_PORT}/"
305 export https_proxy="${http_proxy}"
306 export ftp_proxy="${http_proxy}"
307 CT_DoLog DEBUG "http_proxy='${http_proxy}'"
314 # Remove any lingering config file from any previous run
315 rm -f "${CT_BUILD_DIR}/tsocks.conf"
316 # Find all interfaces and build locally accessible networks
317 server_ip=$(ping -c 1 -W 2 "${CT_PROXY_HOST}" |head -n 1 |sed -r -e 's/^[^\(]+\(([^\)]+)\).*$/\1/;' || true)
318 CT_TestOrAbort "SOCKS proxy '${CT_PROXY_HOST}' has no IP." -n "${server_ip}"
319 /sbin/ifconfig |gawk -v server_ip="${server_ip}" '
321 split( server_ip, tmp, "\\." );
322 server_ip_num = tmp[1] * 2^24 + tmp[2] * 2^16 + tmp[3] * 2^8 + tmp[4] * 2^0;
326 $0 ~ /^[[:space:]]*inet addr:/ {
327 split( $2, tmp, ":|\\." );
328 if( ( tmp[2] == 127 ) && ( tmp[3] == 0 ) && ( tmp[4] == 0 ) && ( tmp[5] == 1 ) ) {
329 /* Skip 127.0.0.1, it'\''s taken care of by tsocks itself */
332 ip_num = tmp[2] * 2^24 + tmp[3] * 2^16 + tmp[4] * 2 ^8 + tmp[5] * 2^0;
337 } while( (i!=0) && ( and( server_ip_num, mask ) == and( ip_num, mask ) ) );
338 mask = and( 0xFFFFFFFF, lshift( mask, 1 ) );
339 if( (i!=0) && (mask!=0) ) {
340 masked_ip = and( ip_num, mask );
341 for( i=0; i<pairs; i++ ) {
342 if( ( masked_ip == ips[i] ) && ( mask == masks[i] ) ) {
346 ips[pairs] = masked_ip;
349 printf( "local = %d.%d.%d.%d/%d.%d.%d.%d\n",
350 and( 0xFF, masked_ip / 2^24 ),
351 and( 0xFF, masked_ip / 2^16 ),
352 and( 0xFF, masked_ip / 2^8 ),
353 and( 0xFF, masked_ip / 2^0 ),
354 and( 0xFF, mask / 2^24 ),
355 and( 0xFF, mask / 2^16 ),
356 and( 0xFF, mask / 2^8 ),
357 and( 0xFF, mask / 2^0 ) );
360 ' >"${CT_BUILD_DIR}/tsocks.conf"
361 ( echo "server = ${server_ip}";
362 echo "server_port = ${CT_PROXY_PORT}";
363 [ -n "${CT_PROXY_USER}" ] && echo "default_user=${CT_PROXY_USER}";
364 [ -n "${CT_PROXY_PASS}" ] && echo "default_pass=${CT_PROXY_PASS}";
365 ) >>"${CT_BUILD_DIR}/tsocks.conf"
366 case "${CT_PROXY_TYPE/socks}" in
367 4|5) proxy_type="${CT_PROXY_TYPE/socks}";;
369 reply=$(inspectsocks "${server_ip}" "${CT_PROXY_PORT}" 2>&1 || true)
371 *"server is a version 4 socks server") proxy_type=4;;
372 *"server is a version 5 socks server") proxy_type=5;;
373 *) CT_Abort "Unable to determine SOCKS proxy type for '${CT_PROXY_HOST}:${CT_PROXY_PORT}'"
377 echo "server_type = ${proxy_type}" >> "${CT_BUILD_DIR}/tsocks.conf"
379 # If tsocks was found, then validateconf is present (distributed with tsocks).
380 CT_DoExecLog DEBUG validateconf -f "${CT_BUILD_DIR}/tsocks.conf"
381 export TSOCKS_CONF_FILE="${CT_BUILD_DIR}/tsocks.conf"
387 # Download an URL using wget
388 # Usage: CT_DoGetFileWget <URL>
390 # Need to return true because it is legitimate to not find the tarball at
391 # some of the provided URLs (think about snapshots, different layouts for
392 # different gcc versions, etc...)
393 # Some (very old!) FTP server might not support the passive mode, thus
395 # With automated download as we are doing, it can be very dangerous to use
396 # -c to continue the downloads. It's far better to simply overwrite the
398 # Some company networks have firewalls to connect to the internet, but it's
399 # not easy to detect them, and wget does not timeout by default while
400 # connecting, so force a global ${CT_CONNECT_TIMEOUT}-second timeout.
401 wget -T ${CT_CONNECT_TIMEOUT} -nc --progress=dot:binary --tries=3 --passive-ftp "$1" \
402 || wget -T ${CT_CONNECT_TIMEOUT} -nc --progress=dot:binary --tries=3 "$1" \
406 # Download an URL using curl
407 # Usage: CT_DoGetFileCurl <URL>
409 # Note: comments about wget method (above) are also valid here
410 # Plus: no good progress indicator is available with curl,
411 # so output is consigned to oblivion
412 curl --ftp-pasv -O --retry 3 "$1" --connect-timeout ${CT_CONNECT_TIMEOUT} >/dev/null \
413 || curl -O --retry 3 "$1" --connect-timeout ${CT_CONNECT_TIMEOUT} >/dev/null \
417 _wget=$(CT_Which wget)
418 _curl=$(CT_Which curl)
419 # Wrapper function to call one of curl or wget
420 # Usage: CT_DoGetFile <URL>
422 case "${_wget},${_curl}" in
423 ,) CT_Abort "Could find neither wget nor curl";;
424 ,*) CT_DoExecLog ALL CT_DoGetFileCurl "$1" 2>&1;;
425 *) CT_DoExecLog ALL CT_DoGetFileWget "$1" 2>&1;;
429 # This function tries to retrieve a tarball form a local directory
430 # Usage: CT_GetLocal <basename> [.extension]
436 # Do we already have it in *our* tarballs dir?
437 ext=$(CT_GetFileExtension "${basename}" ${first_ext})
438 if [ -n "${ext}" ]; then
439 CT_DoLog DEBUG "Already have '${basename}'"
443 if [ -n "${CT_LOCAL_TARBALLS_DIR}" ]; then
444 CT_DoLog DEBUG "Trying to retrieve an already downloaded copy of '${basename}'"
445 # We'd rather have a bzip2'ed tarball, then gzipped tarball, plain tarball,
446 # or, as a failover, a file without extension.
447 # Try local copy first, if it exists
448 for ext in ${first_ext} .tar.bz2 .tar.gz .tgz .tar ''; do
449 CT_DoLog DEBUG "Trying '${CT_LOCAL_TARBALLS_DIR}/${basename}${ext}'"
450 if [ -r "${CT_LOCAL_TARBALLS_DIR}/${basename}${ext}" -a \
451 "${CT_FORCE_DOWNLOAD}" != "y" ]; then
452 CT_DoLog DEBUG "Got '${basename}' from local storage"
453 CT_DoExecLog ALL ln -s "${CT_LOCAL_TARBALLS_DIR}/${basename}${ext}" "${CT_TARBALLS_DIR}/${basename}${ext}"
461 # This function saves the specified to local storage if possible,
462 # and if so, symlinks it for later usage
463 # Usage: CT_SaveLocal </full/path/file.name>
466 local basename="${file##*/}"
468 if [ "${CT_SAVE_TARBALLS}" = "y" ]; then
469 CT_DoLog EXTRA "Saving '${basename}' to local storage"
470 # The file may already exist if downloads are forced: remove it first
471 CT_DoExecLog ALL rm -f "${CT_LOCAL_TARBALLS_DIR}/${basename}"
472 CT_DoExecLog ALL mv -f "${file}" "${CT_LOCAL_TARBALLS_DIR}"
473 CT_DoExecLog ALL ln -s "${CT_LOCAL_TARBALLS_DIR}/${basename}" "${file}"
477 # Download the file from one of the URLs passed as argument
478 # Usage: CT_GetFile <basename> [.extension] <url> [url ...]
485 # If next argument starts with a dot, then this is not an URL,
486 # and we can consider that it is a preferred extension.
493 # Does it exist localy?
494 CT_GetLocal "${file}" ${first_ext} && return 0 || true
497 # Are downloads allowed ?
498 CT_TestAndAbort "File '${file}' not present locally, and downloads are not allowed" "${CT_FORBID_DOWNLOAD}" = "y"
500 # Try to retrieve the file
501 CT_DoLog EXTRA "Retrieving '${file}'"
502 CT_Pushd "${CT_TARBALLS_DIR}"
504 # Add URLs on the LAN mirror
506 if [ "${CT_USE_MIRROR}" = "y" ]; then
507 CT_TestOrAbort "Please set the LAN mirror hostname" -n "${CT_MIRROR_HOSTNAME}"
508 CT_TestOrAbort "Please tell me where to find tarballs on the LAN mirror '${CT_MIRROR_HOSTNAME}'" -n "${CT_MIRROR_BASE}"
509 LAN_URLS="${LAN_URLS} ${CT_MIRROR_SCHEME}://${CT_MIRROR_HOSTNAME}/${CT_MIRROR_BASE}/${file%-*}"
510 LAN_URLS="${LAN_URLS} ${CT_MIRROR_SCHEME}://${CT_MIRROR_HOSTNAME}/${CT_MIRROR_BASE}"
512 if [ "${CT_PREFER_MIRROR}" = "y" ]; then
513 CT_DoLog DEBUG "Pre-pending LAN mirror URLs"
514 URLS="${LAN_URLS} ${@}"
516 CT_DoLog DEBUG "Appending LAN mirror URLs"
517 URLS="${@} ${LAN_URLS}"
521 # Scan all URLs in turn, and try to grab a tarball from there
522 CT_DoSetProxy ${CT_PROXY_TYPE}
523 for ext in ${first_ext} .tar.bz2 .tar.gz .tgz .tar ''; do
524 # Try all urls in turn
525 for url in ${URLS}; do
526 CT_DoLog DEBUG "Trying '${url}/${file}${ext}'"
527 CT_DoGetFile "${url}/${file}${ext}"
528 if [ -f "${file}${ext}" ]; then
529 CT_DoLog DEBUG "Got '${file}' from the Internet"
530 CT_SaveLocal "${CT_TARBALLS_DIR}/${file}${ext}"
537 CT_Abort "Could not retrieve '${file}'."
540 # Checkout from CVS, and build the associated tarball
541 # The tarball will be called ${basename}.tar.bz2
542 # Prerequisite: either the server does not require password,
543 # or the user must already be logged in.
544 # 'tag' is the tag to retrieve. Must be specified, but can be empty.
545 # If dirname is specified, then module will be renamed to dirname
546 # prior to building the tarball.
547 # Usage: CT_GetCVS <basename> <url> <module> <tag> [dirname]
552 local tag="${4:+-r ${4}}"
556 # Does it exist localy?
557 CT_GetLocal "${basename}" && return 0 || true
560 # Are downloads allowed ?
561 CT_TestAndAbort "File '${file}' not present locally, and downloads are not allowed" "${CT_FORBID_DOWNLOAD}" = "y"
563 CT_DoLog EXTRA "Retrieving '${basename}'"
566 CT_Pushd "${tmp_dir}"
568 CT_DoSetProxy ${CT_PROXY_TYPE}
569 CT_DoExecLog ALL cvs -z 9 -d "${uri}" co -P ${tag} "${module}"
570 [ -n "${dirname}" ] && CT_DoExecLog ALL mv "${module}" "${dirname}"
571 CT_DoExecLog ALL tar cjf "${CT_TARBALLS_DIR}/${basename}.tar.bz2" "${dirname:-${module}}"
572 CT_SaveLocal "${CT_TARBALLS_DIR}/${basename}.tar.bz2"
575 CT_DoExecLog ALL rm -rf "${tmp_dir}"
579 # Some tarballs need to be extracted in specific places. Eg.: glibc addons
580 # must be extracted in the glibc directory; uCLibc locales must be extracted
581 # in the extra/locale sub-directory of uClibc. This is taken into account
582 # by the caller, that did a 'cd' into the correct path before calling us
583 # and sets nochdir to 'nochdir'.
584 # Usage: CT_Extract <basename> [nochdir]
588 local ext=$(CT_GetFileExtension "${basename}")
589 CT_TestAndAbort "'${basename}' not found in '${CT_TARBALLS_DIR}'" -z "${ext}"
590 local full_file="${CT_TARBALLS_DIR}/${basename}${ext}"
592 # Check if already extracted
593 if [ -e "${CT_SRC_DIR}/.${basename}.extracted" ]; then
594 CT_DoLog DEBUG "Already extracted '${basename}'"
598 [ "${nochdir}" = "nochdir" ] || CT_Pushd "${CT_SRC_DIR}"
600 CT_DoLog EXTRA "Extracting '${basename}'"
602 .tar.bz2) CT_DoExecLog ALL tar xvjf "${full_file}";;
603 .tar.gz|.tgz) CT_DoExecLog ALL tar xvzf "${full_file}";;
604 .tar) CT_DoExecLog ALL tar xvf "${full_file}";;
605 *) CT_Abort "Don't know how to handle '${basename}${ext}': unknown extension" ;;
608 touch "${CT_SRC_DIR}/.${basename}.extracted"
610 [ "${nochdir}" = "nochdir" ] || CT_Popd
613 # Patches the specified component
614 # Usage: CT_Patch <basename> [nochdir]
618 local base_file="${basename%%-*}"
619 local ver_file="${basename#*-}"
620 local official_patch_dir
621 local custom_patch_dir
623 # Check if already patched
624 if [ -e "${CT_SRC_DIR}/.${basename}.patched" ]; then
625 CT_DoLog DEBUG "Already patched '${basename}'"
629 [ "${nochdir}" = "nochdir" ] || CT_Pushd "${CT_SRC_DIR}/${basename}"
631 CT_DoLog EXTRA "Patching '${basename}'"
635 [ "${CT_CUSTOM_PATCH_ONLY}" = "y" ] || official_patch_dir="${CT_LIB_DIR}/patches/${base_file}/${ver_file}"
636 [ "${CT_CUSTOM_PATCH}" = "y" ] && custom_patch_dir="${CT_CUSTOM_PATCH_DIR}/${base_file}/${ver_file}"
637 for patch_dir in "${official_patch_dir}" "${custom_patch_dir}"; do
638 if [ -n "${patch_dir}" -a -d "${patch_dir}" ]; then
639 for p in "${patch_dir}"/*.patch; do
640 if [ -f "${p}" ]; then
641 CT_DoLog DEBUG "Applying patch '${p}'"
642 CT_DoExecLog ALL patch -g0 -F1 -p1 -f <"${p}"
643 CT_TestAndAbort "Failed while applying patch file '${p}'" ${PIPESTATUS[0]} -ne 0
649 if [ "${CT_OVERIDE_CONFIG_GUESS_SUB}" = "y" ]; then
650 CT_DoLog ALL "Overiding config.guess and config.sub"
651 for cfg in config_guess config_sub; do
652 eval ${cfg}="${CT_LIB_DIR}/scripts/${cfg/_/.}"
653 [ -e "${CT_TOP_DIR}/scripts/${cfg/_/.}" ] && eval ${cfg}="${CT_TOP_DIR}/scripts/${cfg/_/.}"
654 # Can't use CT_DoExecLog because of the '{} \;' to be passed un-mangled to find
655 find . -type f -name "${cfg/_/.}" -exec cp -v "${!cfg}" {} \; |CT_DoLog ALL
659 touch "${CT_SRC_DIR}/.${basename}.patched"
661 [ "${nochdir}" = "nochdir" ] || CT_Popd
664 # Two wrappers to call config.(guess|sub) either from CT_TOP_DIR or CT_LIB_DIR.
665 # Those from CT_TOP_DIR, if they exist, will be be more recent than those from CT_LIB_DIR.
667 if [ -x "${CT_TOP_DIR}/scripts/config.guess" ]; then
668 "${CT_TOP_DIR}/scripts/config.guess"
670 "${CT_LIB_DIR}/scripts/config.guess"
675 if [ -x "${CT_TOP_DIR}/scripts/config.sub" ]; then
676 "${CT_TOP_DIR}/scripts/config.sub" "$@"
678 "${CT_LIB_DIR}/scripts/config.sub" "$@"
682 # Compute the target tuple from what is provided by the user
683 # Usage: CT_DoBuildTargetTuple
684 # In fact this function takes the environment variables to build the target
685 # tuple. It is needed both by the normal build sequence, as well as the
686 # sample saving sequence.
687 CT_DoBuildTargetTuple() {
688 # Set the endianness suffix, and the default endianness gcc option
689 case "${CT_ARCH_BE},${CT_ARCH_LE}" in
690 y,) target_endian_eb=eb
692 CT_ARCH_ENDIAN_CFLAG="-mbig-endian"
693 CT_ARCH_ENDIAN_LDFLAG="-EB"
695 ,y) target_endian_eb=
697 CT_ARCH_ENDIAN_CFLAG="-mlittle-endian"
698 CT_ARCH_ENDIAN_LDFLAG="-EL"
702 # Build the default architecture tuple part
703 CT_TARGET_ARCH="${CT_ARCH}"
705 # Set defaults for the system part of the tuple. Can be overriden
706 # by architecture-specific values.
708 none) CT_TARGET_SYS=elf;;
709 *glibc) CT_TARGET_SYS=gnu;;
710 uClibc) CT_TARGET_SYS=uclibc;;
713 # Transform the ARCH into a kernel-understandable ARCH
714 CT_KERNEL_ARCH="${CT_ARCH}"
716 # Set the default values for ARCH, ABI, CPU, TUNE, FPU and FLOAT
717 unset CT_ARCH_ARCH_CFLAG CT_ARCH_ABI_CFLAG CT_ARCH_CPU_CFLAG CT_ARCH_TUNE_CFLAG CT_ARCH_FPU_CFLAG CT_ARCH_FLOAT_CFLAG
718 unset CT_ARCH_WITH_ARCH CT_ARCH_WITH_ABI CT_ARCH_WITH_CPU CT_ARCH_WITH_TUNE CT_ARCH_WITH_FPU CT_ARCH_WITH_FLOAT
719 [ "${CT_ARCH_ARCH}" ] && { CT_ARCH_ARCH_CFLAG="-march=${CT_ARCH_ARCH}"; CT_ARCH_WITH_ARCH="--with-arch=${CT_ARCH_ARCH}"; }
720 [ "${CT_ARCH_ABI}" ] && { CT_ARCH_ABI_CFLAG="-mabi=${CT_ARCH_ABI}"; CT_ARCH_WITH_ABI="--with-abi=${CT_ARCH_ABI}"; }
721 [ "${CT_ARCH_CPU}" ] && { CT_ARCH_CPU_CFLAG="-mcpu=${CT_ARCH_CPU}"; CT_ARCH_WITH_CPU="--with-cpu=${CT_ARCH_CPU}"; }
722 [ "${CT_ARCH_TUNE}" ] && { CT_ARCH_TUNE_CFLAG="-mtune=${CT_ARCH_TUNE}"; CT_ARCH_WITH_TUNE="--with-tune=${CT_ARCH_TUNE}"; }
723 [ "${CT_ARCH_FPU}" ] && { CT_ARCH_FPU_CFLAG="-mfpu=${CT_ARCH_FPU}"; CT_ARCH_WITH_FPU="--with-fpu=${CT_ARCH_FPU}"; }
724 [ "${CT_ARCH_FLOAT_SW}" ] && { CT_ARCH_FLOAT_CFLAG="-msoft-float"; CT_ARCH_WITH_FLOAT="--with-float=soft"; }
726 # Build the default kernel tuple part
727 CT_TARGET_KERNEL="${CT_KERNEL}"
729 # Overide the default values with the components specific settings
731 CT_DoKernelTupleValues
733 # Finish the target tuple construction
734 CT_TARGET="${CT_TARGET_ARCH}-${CT_TARGET_VENDOR:-unknown}-${CT_TARGET_KERNEL}${CT_TARGET_KERNEL:+-}${CT_TARGET_SYS}"
738 if [ -n "${CT_TARGET_ALIAS_SED_EXPR}" ]; then
739 __sed_alias=$(echo "${CT_TARGET}" |sed -r -e "${CT_TARGET_ALIAS_SED_EXPR}")
741 case ":${CT_TARGET_VENDOR}:${CT_TARGET_ALIAS}:${__sed_alias}:" in
742 :*" "*:*:*:) CT_Abort "Don't use spaces in the vendor string, it breaks things.";;
743 :*"-"*:*:*:) CT_Abort "Don't use dashes in the vendor string, it breaks things.";;
744 :*:*" "*:*:) CT_Abort "Don't use spaces in the target alias, it breaks things.";;
745 :*:*:*" "*:) CT_Abort "Don't use spaces in the target sed transform, it breaks things.";;
749 CT_TARGET=$(CT_DoConfigSub "${CT_TARGET}")
751 # Prepare the target CFLAGS
752 CT_ARCH_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_ARCH_ENDIAN_CFLAG}"
753 CT_ARCH_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_ARCH_ARCH_CFLAG}"
754 CT_ARCH_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_ARCH_ABI_CFLAG}"
755 CT_ARCH_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_ARCH_CPU_CFLAG}"
756 CT_ARCH_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_ARCH_TUNE_CFLAG}"
757 CT_ARCH_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_ARCH_FPU_CFLAG}"
758 CT_ARCH_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_ARCH_FLOAT_CFLAG}"
760 # Now on for the target LDFLAGS
761 CT_ARCH_TARGET_LDFLAGS="${CT_ARCH_TARGET_LDFLAGS} ${CT_ARCH_ENDIAN_LDFLAG}"
764 # This function does pause the build until the user strikes "Return"
765 # Usage: CT_DoPause [optional_message]
768 local message="${1:-Pausing for your pleasure}"
769 CT_DoLog INFO "${message}"
770 read -p "Press 'Enter' to continue, or Ctrl-C to stop..." foo >&6
774 # This function saves the state of the toolchain to be able to restart
776 # Usage: CT_DoSaveState <next_step_name>
778 [ "${CT_DEBUG_CT_SAVE_STEPS}" = "y" ] || return 0
779 local state_name="$1"
780 local state_dir="${CT_STATE_DIR}/${state_name}"
782 CT_DoLog DEBUG "Saving state to restart at step '${state_name}'..."
784 rm -rf "${state_dir}"
785 mkdir -p "${state_dir}"
787 case "${CT_DEBUG_CT_SAVE_STEPS_GZIP}" in
788 y) tar_opt=z; tar_ext=.gz;;
789 *) tar_opt=; tar_ext=;;
792 CT_DoLog DEBUG " Saving environment and aliases"
793 # We must omit shell functions, and some specific bash variables
794 # that break when restoring the environment, later. We could do
795 # all the processing in the gawk script, but a sed is easier...
798 $0~/^[^ ]+ \(\)/ { _p = 0; }
800 $0 == "}" { _p = 1; }
801 ' |sed -r -e '/^BASH_(ARGC|ARGV|LINENO|SOURCE|VERSINFO)=/d;
803 /^(FUNCNAME|GROUPS|PPID|SHELLOPTS)=/d;' >"${state_dir}/env.sh"
805 CT_DoLog DEBUG " Saving CT_CC_CORE_STATIC_PREFIX_DIR='${CT_CC_CORE_STATIC_PREFIX_DIR}'"
806 CT_Pushd "${CT_CC_CORE_STATIC_PREFIX_DIR}"
807 CT_DoExecLog DEBUG tar cv${tar_opt}f "${state_dir}/cc_core_static_prefix_dir.tar${tar_ext}" .
810 CT_DoLog DEBUG " Saving CT_CC_CORE_SHARED_PREFIX_DIR='${CT_CC_CORE_SHARED_PREFIX_DIR}'"
811 CT_Pushd "${CT_CC_CORE_SHARED_PREFIX_DIR}"
812 CT_DoExecLog DEBUG tar cv${tar_opt}f "${state_dir}/cc_core_shared_prefix_dir.tar${tar_ext}" .
815 CT_DoLog DEBUG " Saving CT_PREFIX_DIR='${CT_PREFIX_DIR}'"
816 CT_Pushd "${CT_PREFIX_DIR}"
817 CT_DoExecLog DEBUG tar cv${tar_opt}f "${state_dir}/prefix_dir.tar${tar_ext}" --exclude '*.log' .
820 if [ "${CT_LOG_TO_FILE}" = "y" ]; then
821 CT_DoLog DEBUG " Saving log file"
823 case "${CT_DEBUG_CT_SAVE_STEPS_GZIP}" in
824 y) gzip -3 -c "${CT_LOG_FILE}" >"${state_dir}/log.gz";;
825 *) cat "${CT_LOG_FILE}" >"${state_dir}/log";;
827 exec >>"${CT_LOG_FILE}"
831 # This function restores a previously saved state
832 # Usage: CT_DoLoadState <state_name>
834 local state_name="$1"
835 local state_dir="${CT_STATE_DIR}/${state_name}"
836 local old_RESTART="${CT_RESTART}"
837 local old_STOP="${CT_STOP}"
839 CT_TestOrAbort "The previous build did not reach the point where it could be restarted at '${CT_RESTART}'" -d "${state_dir}"
841 # We need to do something special with the log file!
842 if [ "${CT_LOG_TO_FILE}" = "y" ]; then
843 exec >"${state_dir}/tail.log"
845 CT_DoLog INFO "Restoring state at step '${state_name}', as requested."
847 case "${CT_DEBUG_CT_SAVE_STEPS_GZIP}" in
848 y) tar_opt=z; tar_ext=.gz;;
849 *) tar_opt=; tar_ext=;;
852 CT_DoLog DEBUG " Removing previous build directories"
853 chmod -R u+rwX "${CT_PREFIX_DIR}" "${CT_CC_CORE_SHARED_PREFIX_DIR}" "${CT_CC_CORE_STATIC_PREFIX_DIR}"
854 rm -rf "${CT_PREFIX_DIR}" "${CT_CC_CORE_SHARED_PREFIX_DIR}" "${CT_CC_CORE_STATIC_PREFIX_DIR}"
855 mkdir -p "${CT_PREFIX_DIR}" "${CT_CC_CORE_SHARED_PREFIX_DIR}" "${CT_CC_CORE_STATIC_PREFIX_DIR}"
857 CT_DoLog DEBUG " Restoring CT_PREFIX_DIR='${CT_PREFIX_DIR}'"
858 CT_Pushd "${CT_PREFIX_DIR}"
859 CT_DoExecLog DEBUG tar xv${tar_opt}f "${state_dir}/prefix_dir.tar${tar_ext}"
862 CT_DoLog DEBUG " Restoring CT_CC_CORE_SHARED_PREFIX_DIR='${CT_CC_CORE_SHARED_PREFIX_DIR}'"
863 CT_Pushd "${CT_CC_CORE_SHARED_PREFIX_DIR}"
864 CT_DoExecLog DEBUG tar xv${tar_opt}f "${state_dir}/cc_core_shared_prefix_dir.tar${tar_ext}"
867 CT_DoLog DEBUG " Restoring CT_CC_CORE_STATIC_PREFIX_DIR='${CT_CC_CORE_STATIC_PREFIX_DIR}'"
868 CT_Pushd "${CT_CC_CORE_STATIC_PREFIX_DIR}"
869 CT_DoExecLog DEBUG tar xv${tar_opt}f "${state_dir}/cc_core_static_prefix_dir.tar${tar_ext}"
872 # Restore the environment, discarding any error message
873 # (for example, read-only bash internals)
874 CT_DoLog DEBUG " Restoring environment"
875 . "${state_dir}/env.sh" >/dev/null 2>&1 || true
877 # Restore the new RESTART and STOP steps
878 CT_RESTART="${old_RESTART}"
879 CT_STOP="${old_STOP}"
880 unset old_stop old_restart
882 if [ "${CT_LOG_TO_FILE}" = "y" ]; then
883 CT_DoLog DEBUG " Restoring log file"
885 case "${CT_DEBUG_CT_SAVE_STEPS_GZIP}" in
886 y) zcat "${state_dir}/log.gz" >"${CT_LOG_FILE}";;
887 *) cat "${state_dir}/log" >"${CT_LOG_FILE}";;
889 cat "${state_dir}/tail.log" >>"${CT_LOG_FILE}"
890 exec >>"${CT_LOG_FILE}"
891 rm -f "${state_dir}/tail.log"
896 CT_DoStep INFO "Cleaning-up the toolchain's directory"
898 CT_DoLog EXTRA "Removing access to the build system tools"
899 find "${CT_PREFIX_DIR}/bin" -name "${CT_BUILD}-"'*' -exec rm -fv {} \; |CT_DoLog DEBUG
900 find "${CT_PREFIX_DIR}/bin" -name "${CT_HOST}-"'*' -exec rm -fv {} \; |CT_DoLog DEBUG
901 CT_DoExecLog DEBUG rm -fv "${CT_PREFIX_DIR}/bin/makeinfo"
903 if [ "${CT_BARE_METAL}" != "y" ]; then
904 CT_DoLog EXTRA "Installing the populate helper"
905 sed -r -e 's|@@CT_TARGET@@|'"${CT_TARGET}"'|g;' \
906 "${CT_LIB_DIR}/scripts/populate.in" \
907 >"${CT_PREFIX_DIR}/bin/${CT_TARGET}-populate"
908 CT_DoExecLog ALL chmod 755 "${CT_PREFIX_DIR}/bin/${CT_TARGET}-populate"
911 # Create the aliases to the target tools
912 CT_DoLog EXTRA "Creating toolchain aliases"
913 CT_Pushd "${CT_PREFIX_DIR}/bin"
914 for t in "${CT_TARGET}-"*; do
915 if [ -n "${CT_TARGET_ALIAS}" ]; then
916 _t=$(echo "$t" |sed -r -e 's/^'"${CT_TARGET}"'-/'"${CT_TARGET_ALIAS}"'-/;')
917 CT_DoExecLog ALL ln -sv "${t}" "${_t}"
919 if [ -n "${CT_TARGET_ALIAS_SED_EXPR}" ]; then
920 _t=$(echo "$t" |sed -r -e "${CT_TARGET_ALIAS_SED_EXPR}")
921 CT_DoExecLog ALL ln -sv "${t}" "${_t}"
926 # Remove the generated documentation files
927 if [ "${CT_REMOVE_DOCS}" = "y" ]; then
928 CT_DoLog EXTRA "Removing installed documentation"
929 CT_DoForceRmdir "${CT_PREFIX_DIR}/"{,usr/}{man,info}
930 CT_DoForceRmdir "${CT_SYSROOT_DIR}/"{,usr/}{man,info}
931 CT_DoForceRmdir "${CT_DEBUG_INSTALL_DIR}/"{,usr/}{man,info}