1 # This file contains the functions common to glibc and eglibc
3 # Extract the C library tarball(s)
7 # Extract the main tarball
8 CT_Extract "${CT_LIBC}-${CT_LIBC_VERSION}"
9 CT_Pushd "${CT_SRC_DIR}/${CT_LIBC}-${CT_LIBC_VERSION}"
10 CT_Patch nochdir "${CT_LIBC}" "${CT_LIBC_VERSION}"
12 # Extract the add-opns
13 for addon in $(do_libc_add_ons_list " "); do
14 # If the addon was bundled with the main archive, we do not
15 # need to extract it. Worse, if we were to try to extract
16 # it, we'd get an error.
17 if [ -d "${addon}" ]; then
18 CT_DoLog DEBUG "Add-on already present, spkipping extraction"
22 CT_Extract nochdir "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"
24 CT_TestAndAbort "Error in add-on '${addon}': both short and long names in tarball" \
25 -d "${addon}" -a -d "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"
27 # Some addons have the 'long' name, while others have the
28 # 'short' name, but patches are non-uniformly built with
29 # either the 'long' or 'short' name, whatever the addons name
30 # but we prefer the 'short' name and avoid duplicates.
31 if [ -d "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}" ]; then
32 CT_DoExecLog FILE mv "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}" "${addon}"
35 CT_DoExecLog FILE ln -s "${addon}" "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"
37 CT_Patch nochdir "${CT_LIBC}" "${addon}-${CT_LIBC_VERSION}"
39 # Remove the long name since it can confuse configure scripts to run
40 # the same source twice.
41 rm "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"
44 # The configure files may be older than the configure.in files
45 # if using a snapshot (or even some tarballs). Fake them being
47 find . -type f -name configure -exec touch {} \; 2>&1 |CT_DoLog ALL
51 if [ "${CT_LIBC_LOCALES}" = "y" ]; then
52 do_libc_locales_extract
56 # Build and install headers and start files
57 do_libc_start_files() {
58 # Start files and Headers should be configured the same way as the
59 # final libc, but built and installed differently.
60 do_libc_backend libc_mode=startfiles
63 # This function builds and install the full C library
65 do_libc_backend libc_mode=final
69 local src_dir="${CT_SRC_DIR}/${CT_LIBC}-${CT_LIBC_VERSION}"
73 local -a extra_make_args
76 while [ $# -ne 0 ]; do
81 if [ "${libc_mode}" = "startfiles" ]; then
82 CT_DoStep INFO "Installing C library headers & start files"
83 mkdir -p "${CT_BUILD_DIR}/build-libc-start-files"
84 cd "${CT_BUILD_DIR}/build-libc-start-files"
85 else # libc_mode = final
86 CT_DoStep INFO "Installing C library"
87 mkdir -p "${CT_BUILD_DIR}/build-libc"
88 cd "${CT_BUILD_DIR}/build-libc"
91 CT_DoLog EXTRA "Configuring C library"
95 if [ "${CT_EGLIBC_CUSTOM_CONFIG}" = "y" ]; then
96 CT_DoExecLog ALL cp "${CT_CONFIG_DIR}/eglibc.config" option-groups.config
98 if [ "${CT_EGLIBC_OPT_SIZE}" = "y" ]; then
105 # glibc can't be built without -O2 (reference needed!)
107 # Also, if those two are missing, iconv build breaks
108 extra_config+=( --disable-debug --disable-sanity-checks )
112 # Add some default glibc config options if not given by user.
113 # We don't need to be conditional on wether the user did set different
114 # values, as they CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY is passed after
117 extra_config+=("$(do_libc_min_kernel_config)")
119 case "${CT_THREADS}" in
120 nptl) extra_config+=("--with-__thread" "--with-tls");;
121 linuxthreads) extra_config+=("--with-__thread" "--without-tls" "--without-nptl");;
122 none) extra_config+=("--without-__thread" "--without-nptl")
123 case "${CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY[*]}" in
125 *) extra_config+=("--without-tls");;
130 case "${CT_SHARED_LIBS}" in
131 y) extra_config+=("--enable-shared");;
132 *) extra_config+=("--disable-shared");;
135 case "${CT_ARCH_FLOAT}" in
136 hard) extra_config+=("--with-fp");;
137 soft) extra_config+=("--without-fp");;
138 softfp) extra_config+=("--with-fp");;
141 if [ "${CT_LIBC_DISABLE_VERSIONING}" = "y" ]; then
142 extra_config+=("--disable-versioning")
145 if [ "${CT_LIBC_OLDEST_ABI}" != "" ]; then
146 extra_config+=("--enable-oldest-abi=${CT_LIBC_OLDEST_ABI}")
149 case "$(do_libc_add_ons_list ,)" in
150 "") extra_config+=("--enable-add-ons=no");;
151 *) extra_config+=("--enable-add-ons=$(do_libc_add_ons_list ,)");;
154 if [ "${CT_LIBC_EGLIBC_HAS_PKGVERSION_BUGURL}" = "y" ]; then
155 extra_config+=("--with-pkgversion=${CT_PKGVERSION}")
156 [ -n "${CT_TOOLCHAIN_BUGURL}" ] && extra_config+=("--with-bugurl=${CT_TOOLCHAIN_BUGURL}")
159 extra_cc_args="${extra_cc_args} ${CT_ARCH_ENDIAN_OPT}"
162 if [ "${CT_LIBC_GLIBC_FORCE_UNWIND}" = "y" ]; then
163 echo "libc_cv_forced_unwind=yes" >>config.cache
164 echo "libc_cv_c_cleanup=yes" >>config.cache
167 # Pre-seed the configparms file with values from the config option
168 printf "${CT_LIBC_GLIBC_CONFIGPARMS}\n" > configparms
170 cross_cc=$(CT_Which "${CT_TARGET}-gcc")
172 CT_DoLog DEBUG "Using gcc for target: '${cross_cc}'"
173 CT_DoLog DEBUG "Configuring with addons : '$(do_libc_add_ons_list ,)'"
174 CT_DoLog DEBUG "Extra config args passed: '${extra_config[*]}'"
175 CT_DoLog DEBUG "Extra CC args passed : '${extra_cc_args}'"
177 glibc_cflags="${CT_TARGET_CFLAGS} ${CT_LIBC_GLIBC_EXTRA_CFLAGS} ${OPTIMIZE}"
178 case "${CT_LIBC_ENABLE_FORTIFIED_BUILD}" in
180 *) glibc_cflags+=" -U_FORTIFY_SOURCE";;
183 # ./configure is mislead by our tools override wrapper for bash
184 # so just tell it where the real bash is _on_the_target_!
186 # - ${ac_cv_path_BASH_SHELL} is only used to set BASH_SHELL
187 # - ${BASH_SHELL} is only used to set BASH
188 # - ${BASH} is only used to set the shebang
189 # in two scripts to run on the target
190 # So we can safely bypass bash detection at compile time.
191 # Should this change in a future eglibc release, we'd better
192 # directly mangle the generated scripts _after_ they get built,
193 # or even after they get installed... eglibc is such a sucker...
194 echo "ac_cv_path_BASH_SHELL=/bin/bash" >>config.cache
196 # Configure with --prefix the way we want it on the target...
197 # There are a whole lot of settings here. You'll probably want
198 # to read up on what they all mean, and customize a bit, possibly by setting GLIBC_EXTRA_CONFIG_ARRAY
199 # Compare these options with the ones used when installing the glibc headers above - they're different.
200 # Adding "--without-gd" option to avoid error "memusagestat.c:36:16: gd.h: No such file or directory"
201 # See also http://sources.redhat.com/ml/libc-alpha/2000-07/msg00024.html.
202 # Set BUILD_CC, or we won't be able to build datafiles
203 # Run explicitly through CONFIG_SHELL, or the build breaks badly (loop-of-death)
204 # when the shell is not bash... Sigh... :-(
207 BUILD_CC="${CT_BUILD}-gcc" \
208 CFLAGS="${glibc_cflags}" \
209 CC="${CT_TARGET}-gcc ${CT_LIBC_EXTRA_CC_ARGS} ${extra_cc_args}" \
211 RANLIB=${CT_TARGET}-ranlib \
213 "${src_dir}/configure" \
215 --build=${CT_BUILD} \
216 --host=${CT_TARGET} \
217 --cache-file="$(pwd)/config.cache" \
221 --with-headers="${CT_HEADERS_DIR}" \
222 "${extra_config[@]}" \
223 "${CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY[@]}"
226 case "${CT_ARCH},${CT_ARCH_CPU}" in
228 # http://sourceware.org/ml/crossgcc/2008-10/msg00068.html
229 CT_DoLog DEBUG "Activating support for memset on broken ppc-8xx (CPU15 erratum)"
230 extra_make_args+=( ASFLAGS="-DBROKEN_PPC_8xx_CPU15" )
234 if [ "${libc_mode}" = "startfiles" ]; then
235 CT_DoLog EXTRA "Installing C library headers"
237 # use the 'install-headers' makefile target to install the
239 CT_DoExecLog ALL make ${JOBSFLAGS} \
240 install_root=${CT_SYSROOT_DIR} \
241 install-bootstrap-headers=yes \
242 "${extra_make_args[@]}" \
245 # For glibc, a few headers need to be manually installed
246 if [ "${CT_LIBC}" = "glibc" ]; then
247 # Two headers -- stubs.h and features.h -- aren't installed by install-headers,
248 # so do them by hand. We can tolerate an empty stubs.h for the moment.
249 # See e.g. http://gcc.gnu.org/ml/gcc/2002-01/msg00900.html
250 mkdir -p "${CT_HEADERS_DIR}/gnu"
251 CT_DoExecLog ALL touch "${CT_HEADERS_DIR}/gnu/stubs.h"
252 CT_DoExecLog ALL cp -v "${CT_SRC_DIR}/glibc-${CT_LIBC_VERSION}/include/features.h" \
253 "${CT_HEADERS_DIR}/features.h"
255 # Building the bootstrap gcc requires either setting inhibit_libc, or
256 # having a copy of stdio_lim.h... see
257 # http://sources.redhat.com/ml/libc-alpha/2003-11/msg00045.html
258 CT_DoExecLog ALL cp -v bits/stdio_lim.h "${CT_HEADERS_DIR}/bits/stdio_lim.h"
260 # Following error building gcc-4.0.0's gcj:
261 # error: bits/syscall.h: No such file or directory
262 # solved by following copy; see http://sourceware.org/ml/crossgcc/2005-05/msg00168.html
263 # but it breaks arm, see http://sourceware.org/ml/crossgcc/2006-01/msg00091.html
266 *) CT_DoExecLog ALL cp -v "misc/syscall-list.h" \
267 "${CT_HEADERS_DIR}/bits/syscall.h"
272 if [ "${CT_THREADS}" = "nptl" ]; then
273 CT_DoLog EXTRA "Installing C library start files"
275 # there are a few object files needed to link shared libraries,
276 # which we build and install by hand
277 CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}/usr/lib"
278 CT_DoExecLog ALL make ${JOBSFLAGS} \
279 "${extra_make_args[@]}" \
281 CT_DoExecLog ALL cp csu/crt1.o csu/crti.o csu/crtn.o \
282 "${CT_SYSROOT_DIR}/usr/lib"
284 # Finally, 'libgcc_s.so' requires a 'libc.so' to link against.
285 # However, since we will never actually execute its code,
286 # it doesn't matter what it contains. So, treating '/dev/null'
287 # as a C source file, we produce a dummy 'libc.so' in one step
288 CT_DoExecLog ALL "${cross_cc}" -nostdlib \
292 -o "${CT_SYSROOT_DIR}/usr/lib/libc.so"
294 else # libc_mode = final
295 CT_DoLog EXTRA "Building C library"
296 CT_DoExecLog ALL make ${JOBSFLAGS} \
297 "${extra_make_args[@]}" \
300 CT_DoLog EXTRA "Installing C library"
301 CT_DoExecLog ALL make ${JOBSFLAGS} \
302 "${extra_make_args[@]}" \
303 install_root="${CT_SYSROOT_DIR}" \
306 if [ "${CT_BUILD_MANUALS}" = "y" ]; then
307 CT_DoLog EXTRA "Building and installing the C library manual"
308 # Omit JOBSFLAGS as GLIBC has problems building the
309 # manuals in parallel
310 CT_DoExecLog ALL make pdf html
311 # EGLIBC doesn't have a install-{pdf.html} and leaves the manuals
312 # in the source directory
313 CT_DoExecLog ALL mkdir -p ${CT_PREFIX_DIR}/share/doc
314 CT_DoExecLog ALL cp -av ${src_dir}/manual/*.pdf ${src_dir}/manual/libc \
315 ${CT_PREFIX_DIR}/share/doc
318 if [ "${CT_LIBC_LOCALES}" = "y" ]; then
326 # This function finishes the C library install
332 # Build up the addons list, separated with $1
333 do_libc_add_ons_list() {
335 local addons_list="$( echo "${CT_LIBC_ADDONS_LIST}" \
336 |sed -r -e "s/[[:space:],]/${sep}/g;" \
338 case "${CT_THREADS}" in
340 *) addons_list="${addons_list}${sep}${CT_THREADS}";;
342 [ "${CT_LIBC_GLIBC_USE_PORTS}" = "y" ] && addons_list="${addons_list}${sep}ports"
343 # Remove duplicate, leading and trailing separators
344 echo "${addons_list}" |sed -r -e "s/${sep}+/${sep}/g; s/^${sep}//; s/${sep}\$//;"
347 # Compute up the minimum supported Linux kernel version
348 do_libc_min_kernel_config() {
349 local min_kernel_config
351 case "${CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY[*]}" in
352 *--enable-kernel*) ;;
353 *) if [ "${CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS}" = "y" ]; then
354 # We can't rely on the kernel version from the configuration,
355 # because it might not be available if the user uses pre-installed
356 # headers. On the other hand, both method will have the kernel
357 # version installed in "usr/include/linux/version.h" in the sysroot.
358 # Parse that instead of having two code-paths.
359 version_code_file="${CT_SYSROOT_DIR}/usr/include/linux/version.h"
360 if [ ! -f "${version_code_file}" -o ! -r "${version_code_file}" ]; then
361 CT_Abort "Linux version is unavailable in installed headers files"
363 version_code="$( grep -E LINUX_VERSION_CODE "${version_code_file}" \
366 version=$(((version_code>>16)&0xFF))
367 patchlevel=$(((version_code>>8)&0xFF))
368 sublevel=$((version_code&0xFF))
369 min_kernel_config="${version}.${patchlevel}.${sublevel}"
370 elif [ "${CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN}" = "y" ]; then
371 # Trim the fourth part of the linux version, keeping only the first three numbers
372 min_kernel_config="$( echo "${CT_LIBC_GLIBC_MIN_KERNEL_VERSION}" \
373 |sed -r -e 's/^([^.]+\.[^.]+\.[^.]+)(|\.[^.]+)$/\1/;' \
376 echo "--enable-kernel=${min_kernel_config}"