1 # This file adds functions to build glibc
2 # Copyright 2007 Yann E. MORIN
3 # Licensed under the GPL v2. See COPYING in the root of this package
7 # Ah! Not all GNU folks seem stupid. All glibc releases are in the same
8 # directory. Good. Alas, there is no snapshot there. I'll deal with them
10 CT_GetFile "${CT_LIBC_FILE}" ftp://ftp.gnu.org/gnu/glibc
13 addons_list=`echo "${CT_LIBC_ADDONS_LIST}" |sed -r -e 's/,/ /g; s/ $//g;'`
14 for addon in ${addons_list}; do
15 CT_GetFile "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}" ftp://ftp.gnu.org/gnu/glibc
17 [ "${CT_LIBC_GLIBC_USE_PORTS}" = "y" ] && CT_GetFile "${CT_LIBC}-ports-${CT_LIBC_VERSION}" ftp://ftp.gnu.org/gnu/glibc
24 CT_ExtractAndPatch "${CT_LIBC_FILE}"
27 addons_list=`echo "${CT_LIBC_ADDONS_LIST}" |sed -r -e 's/,/ /g; s/ $//g;'`
28 for addon in ${addons_list}; do
29 CT_ExtractAndPatch "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"
31 [ "${CT_LIBC_GLIBC_USE_PORTS}" = "y" ] && CT_ExtractAndPatch "${CT_LIBC}-ports-${CT_LIBC_VERSION}"
36 # There is nothing to do for glibc check config
37 do_libc_check_config() {
41 # This function installs the glibc headers needed to build the core compiler
43 # Only need to install bootstrap glibc headers for gcc-3.0 and above? Or maybe just gcc-3.3 and above?
44 # See also http://gcc.gnu.org/PR8180, which complains about the need for this step.
45 grep -q 'gcc-[34]' "${CT_SRC_DIR}/${CT_CC_CORE_FILE}/ChangeLog" || return 0
47 CT_DoStep INFO "Installing C library headers"
49 mkdir -p "${CT_BUILD_DIR}/build-libc-headers"
50 cd "${CT_BUILD_DIR}/build-libc-headers"
52 CT_DoLog EXTRA "Configuring C library headers"
54 # The following three things have to be done to build glibc-2.3.x, but they don't hurt older versions.
55 # 1. override CC to keep glibc's configure from using $TARGET-gcc.
56 # 2. disable linuxthreads, which needs a real cross-compiler to generate tcb-offsets.h properly
57 # 3. build with gcc 3.2 or later
58 # Compare these options with the ones used when building glibc for real below - they're different.
59 # As of glibc-2.3.2, to get this step to work for hppa-linux, you need --enable-hacker-mode
60 # so when configure checks to make sure gcc has access to the assembler you just built...
61 # Alternately, we could put ${PREFIX}/${TARGET}/bin on the path.
62 # Set --build so maybe we don't have to specify "cross-compiling=yes" below (haven't tried yet)
64 # "*** WARNING: Are you sure you do not want to use the `linuxthreads'"
66 # is ok here, since all we want are the basic headers at this point.
67 # Override libc_cv_ppc_machine so glibc-cvs doesn't complain
68 # 'a version of binutils that supports .machine "altivec" is needed'.
70 # We also need to use the ports addon if specified
72 [ "${CT_LIBC_GLIBC_USE_PORTS}" = "y" ] && addons="${CT_LIBC}-ports-${CT_LIBC_VERSION}"
74 libc_cv_ppc_machine=yes \
76 "${CT_SRC_DIR}/${CT_LIBC_FILE}/configure" \
77 --build="${CT_BUILD}" \
78 --host="${CT_TARGET}" \
80 --with-headers="${CT_HEADERS_DIR}" \
82 --disable-sanity-checks \
83 --enable-hacker-mode \
84 --enable-add-ons="${addons}" \
85 --without-nptl 2>&1 |CT_DoLog ALL
87 CT_DoLog EXTRA "Installing C library headers"
89 if grep -q GLIBC_2.3 "${CT_SRC_DIR}/${CT_LIBC_FILE}/ChangeLog"; then
90 # glibc-2.3.x passes cross options to $(CC) when generating errlist-compat.c,
91 # which fails without a real cross-compiler.
92 # Fortunately, we don't need errlist-compat.c, since we just need .h
93 # files, so work around this by creating a fake errlist-compat.c and
94 # satisfying its dependencies.
95 # Another workaround might be to tell configure to not use any cross
97 # The real fix would be to get install-headers to not generate
99 # Note: BOOTSTRAP_GCC is used by:
100 # patches/glibc-2.3.5/glibc-mips-bootstrap-gcc-header-install.patch
102 libc_cv_ppc_machine=yes \
103 make CFLAGS="-O -DBOOTSTRAP_GCC" sysdeps/gnu/errlist.c 2>&1 |CT_DoLog ALL
104 mkdir -p stdio-common
106 # sleep for 2 seconds for benefit of filesystems with lousy time
107 # resolution, like FAT, so make knows for sure errlist-compat.c doesn't
110 touch stdio-common/errlist-compat.c
112 # Note: BOOTSTRAP_GCC (see above)
113 libc_cv_ppc_machine=yes \
114 make cross-compiling=yes install_root=${CT_SYSROOT_DIR} \
115 CFLAGS="-O -DBOOTSTRAP_GCC" ${LIBC_SYSROOT_ARG} \
116 install-headers 2>&1 |CT_DoLog ALL
118 # Two headers -- stubs.h and features.h -- aren't installed by install-headers,
119 # so do them by hand. We can tolerate an empty stubs.h for the moment.
120 # See e.g. http://gcc.gnu.org/ml/gcc/2002-01/msg00900.html
121 mkdir -p "${CT_HEADERS_DIR}/gnu"
122 touch "${CT_HEADERS_DIR}/gnu/stubs.h"
123 cp "${CT_SRC_DIR}/${CT_LIBC_FILE}/include/features.h" "${CT_HEADERS_DIR}/features.h"
125 # Building the bootstrap gcc requires either setting inhibit_libc, or
126 # having a copy of stdio_lim.h... see
127 # http://sources.redhat.com/ml/libc-alpha/2003-11/msg00045.html
128 cp bits/stdio_lim.h "${CT_HEADERS_DIR}/bits/stdio_lim.h"
130 # Following error building gcc-4.0.0's gcj:
131 # error: bits/syscall.h: No such file or directory
132 # solved by following copy; see http://sourceware.org/ml/crossgcc/2005-05/msg00168.html
133 # but it breaks arm, see http://sourceware.org/ml/crossgcc/2006-01/msg00091.html
134 [ "${CT_ARCH}" != "arm" ] && cp misc/syscall-list.h "${CT_HEADERS_DIR}/bits/syscall.h" || true
139 # This function builds and install the full glibc
141 CT_DoStep INFO "Installing C library"
143 mkdir -p "${CT_BUILD_DIR}/build-libc"
144 cd "${CT_BUILD_DIR}/build-libc"
146 CT_DoLog EXTRA "Configuring C library"
148 # Add some default glibc config options if not given by user.
150 case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in
152 *) extra_config="${extra_config} --enable-kernel=`echo ${CT_KERNEL_VERSION} |sed -r -e 's/^([^.]+\.[^.]+\.[^.]+)(|\.[^.]+)$/\1/;'`"
154 case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in
156 *) extra_config="${extra_config} --without-tls"
158 case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in
160 *) extra_config="${extra_config} --without-__thread"
162 case "${CT_SHARED_LIBS}" in
163 y) extra_config="${extra_config} --enable-shared";;
164 *) extra_config="${extra_config} --disable-shared";;
166 case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in
169 *) case "${CT_ARCH_FLOAT_HW},${CT_ARCH_FLOAT_SW}" in
170 y,) extra_config="${extra_config} --with-fp";;
171 ,y) extra_config="${extra_config} --without-fp";;
175 case "${CT_LIBC_ADDONS},${CT_LIBC_GLIBC_USE_PORTS}" in
176 y,y) addons_config="--enable-add-ons=${CT_LIBC_ADDONS_LIST},${CT_LIBC}-ports-${CT_LIBC_VERSION}";;
177 y,) addons_config="--enable-add-ons=${CT_LIBC_ADDONS_LIST}";;
178 ,y) addons_config="--enable-add-ons=${CT_LIBC}-ports-${CT_LIBC_VERSION}";;
179 *) addons_config="";;
182 # Add some default CC args
183 extra_cc_args="${CT_CFLAGS_FOR_HOST}"
184 case "${CT_LIBC_EXTRA_CC_ARGS}" in
186 *-mlittle-endian*) ;;
187 *) case "${CT_ARCH_BE},${CT_ARCH_LE}" in
188 y,) extra_cc_args="${extra_cc_args} -mbig-endian";;
189 ,y) extra_cc_args="${extra_cc_args} -mlittle-endian";;
193 CT_DoLog DEBUG "Configuring with addons : \"${addons_config}\""
194 CT_DoLog DEBUG "Extra config args passed: \"${extra_config}\""
195 CT_DoLog DEBUG "Extra CC args passed: \"${extra_cc_args}\""
197 # sh3 and sh4 really need to set configparms as of gcc-3.4/glibc-2.3.2
198 # note: this is awkward, doesn't work well if you need more than one line in configparms
199 echo ${CT_LIBC_GLIBC_CONFIGPARMS} > configparms
201 # For glibc 2.3.4 and later we need to set some autoconf cache
202 # variables, because nptl/sysdeps/pthread/configure.in does not
203 # work when cross-compiling.
204 if test -d ${GLIBC_DIR}/nptl; then
205 libc_cv_forced_unwind=yes
206 libc_cv_c_cleanup=yes
207 export libc_cv_forced_unwind libc_cv_c_cleanup
210 # Configure with --prefix the way we want it on the target...
211 # There are a whole lot of settings here. You'll probably want
212 # to read up on what they all mean, and customize a bit, possibly by setting GLIBC_EXTRA_CONFIG
213 # Compare these options with the ones used when installing the glibc headers above - they're different.
214 # Adding "--without-gd" option to avoid error "memusagestat.c:36:16: gd.h: No such file or directory"
215 # See also http://sources.redhat.com/ml/libc-alpha/2000-07/msg00024.html.
216 # Set BUILD_CC, or you won't be able to build datafiles
217 # Set --build, else glibc-2.3.2 will think you're not cross-compiling, and try to run the test programs
219 BUILD_CC=${CT_CC_NATIVE} \
220 CFLAGS="${CT_TARGET_CFLAGS} ${CT_LIBC_GLIBC_EXTRA_CFLAGS} -O" \
221 CC="${CT_TARGET}-gcc ${CT_LIBC_EXTRA_CC_ARGS} ${extra_cc_args}" \
223 RANLIB=${CT_TARGET}-ranlib \
224 "${CT_SRC_DIR}/${CT_LIBC_FILE}/configure" \
226 --build=${CT_BUILD} --host=${CT_TARGET} \
232 --with-headers="${CT_HEADERS_DIR}" \
235 ${CT_LIBC_GLIBC_EXTRA_CONFIG} 2>&1 |CT_DoLog ALL
237 if grep -l '^install-lib-all:' "${CT_SRC_DIR}/${CT_LIBC_FILE}/Makerules" > /dev/null; then
239 # If the install-lib-all target (which is added by our make-install-lib-all.patch)
240 # is present, it means we're building glibc-2.3.3 or later, and we can't
241 # build programs yet, as they require libeh, which won't be installed
242 # until full build of gcc
243 GLIBC_INITIAL_BUILD_RULE=lib
244 GLIBC_INITIAL_INSTALL_RULE="install-lib-all install-headers"
245 GLIBC_INSTALL_APPS_LATER=yes
248 # We can build and install everything with the bootstrap compiler.
249 GLIBC_INITIAL_BUILD_RULE=all
250 GLIBC_INITIAL_INSTALL_RULE=install
251 GLIBC_INSTALL_APPS_LATER=no
254 # If this fails with an error like this:
255 # ... linux/autoconf.h: No such file or directory
256 # then you need to set the KERNELCONFIG variable to point to a .config file for this arch.
257 # The following architectures are known to need kernel .config: alpha, arm, ia64, s390, sh, sparc
258 # Note: LD and RANLIB needed by glibc-2.1.3's c_stub directory, at least on macosx
259 # No need for PARALLELMFLAGS here, Makefile already reads this environment variable
260 CT_DoLog EXTRA "Building C library"
261 make LD=${CT_TARGET}-ld \
262 RANLIB=${CT_TARGET}-ranlib \
263 ${GLIBC_INITIAL_BUILD_RULE} 2>&1 |CT_DoLog ALL
265 CT_DoLog EXTRA "Installing C library"
266 make install_root="${CT_SYSROOT_DIR}" \
267 ${LIBC_SYSROOT_ARG} \
268 ${GLIBC_INITIAL_INSTALL_RULE} 2>&1 |CT_DoLog ALL
270 # This doesn't seem to work when building a crosscompiler,
271 # as it tries to execute localedef using the just-built ld.so!?
272 #CT_DoLog EXTRA "Installing locales"
273 #make localedata/install-locales install_root=${SYSROOT} 2>&1 |CT_DoLog ALL
275 # Fix problems in linker scripts.
277 # 1. Remove absolute paths
278 # Any file in a list of known suspects that isn't a symlink is assumed to be a linker script.
279 # FIXME: test -h is not portable
280 # FIXME: probably need to check more files than just these three...
281 # Need to use sed instead of just assuming we know what's in libc.so because otherwise alpha breaks
283 # 2. Remove lines containing BUG per http://sources.redhat.com/ml/bug-glibc/2003-05/msg00055.html,
284 # needed to fix gcc-3.2.3/glibc-2.3.2 targeting arm
286 # To make "strip *.so.*" not fail (ptxdist does this), rename to .so_orig rather than .so.orig
287 CT_DoLog EXTRA "Fixing C library linker scripts"
288 for file in libc.so libpthread.so libgcc_s.so; do
289 for dir in lib lib64 usr/lib usr/lib64; do
290 if [ -f "${CT_SYSROOT_DIR}/${dir}/${file}" -a ! -L ${CT_SYSROOT_DIR}/$lib/$file ]; then
291 cp "${CT_SYSROOT_DIR}/${dir}/${file}" "${CT_SYSROOT_DIR}/${dir}/${file}_orig"
292 CT_DoLog DEBUG "Fixing \"${CT_SYS_ROOT_DIR}/${dir}/${file}\""
293 sed -i -r -e 's,/usr/lib/,,g;
297 /BUG in libc.scripts.output-format.sed/d' "${CT_SYSROOT_DIR}/${dir}/${file}"
305 # This function finishes the glibc install
307 # Finally, build and install glibc programs, now that libeh (if any) is installed
308 # Don't do this unless needed, 'cause it causes glibc-2.{1.3,2.2} to fail here with
309 # .../gcc-3.4.1-glibc-2.1.3/build-glibc/libc.so.6: undefined reference to `__deregister_frame_info'
310 # .../gcc-3.4.1-glibc-2.1.3/build-glibc/libc.so.6: undefined reference to `__register_frame_info'
311 [ "${GLIBC_INSTALL_APPS_LATER}" = "yes" ] || return 0
313 CT_DoStep INFO "Finishing C library"
315 cd "${CT_BUILD_DIR}/build-libc"
317 CT_DoLog EXTRA "Re-building C library"
318 make LD=${CT_TARGET}-ld RANLIB=${CT_TARGET}-ranlib 2>&1 |CT_DoLog ALL
320 CT_DoLog EXTRA "Installing missing C library components"
321 # note: should do full install and then fix linker scripts, but this is faster
322 for t in bin rootsbin sbin data others; do
323 make install_root="${CT_SYSROOT_DIR}" \
324 ${LIBC_SYSROOT_ARG} \
325 install-${t} 2>&1 |CT_DoLog ALL